nm_utils_hwaddr_ntoa() and nm_utils_hwaddr_aton() are like
ether_ntoa()/ether_aton(), but handle IPoIB too.
nm_utils_hwaddr_atoba() is like _aton() but returns a GByteArray,
since that's what's wanted in many places.
Also remove nm_ether_ntop() and replace uses of it with
nm_utils_hwaddr_ntoa().
For VPN connections, the interface name would be that of the VPN's
IP interface, but the script environment would be the that of the
VPN's parent device. Enhance the environment by adding any VPN
specific details as additional environment variables prefixed by
"VPN_". Leave the existing environment setup intact for backwards
compatiblity.
Additionally, the dispatcher never got updated for IPv6 support,
so push IPv6 configuration and DHCPv6 configuration into the
environment too.
Even better, push everything the dispatcher needs to it instead
of making the dispatcher make D-Bus requests back to NM, which
sometimes fails if NM has already torn down the device or the
connection which the device was using.
And add some testcases to ensure that we don't break backwards compat,
the testcases here were grabbed from a 0.8.4 machine with a hacked up
dispatcher to dump everything it was given from NM.
The only thing that doesn't work yet is the system-settings service's
"auto eth" connections for ethernet devices that don't have an existing
connection. Might also have issues with unmanaged devices that can't
provide a MAC address until they are brought up, but we'll see.
Instead of requiring applets to hash passphrases, just do it in NM instead.
This should fix confusion where people don't understand that they are seeing
their hashed passphrase.
* callouts/Makefile.am
callouts/nm-dispatcher-action.c
callouts/nm-dispatcher-action.h
callouts/nm-dispatcher.conf
callouts/nm-dispatcher.xml
callouts/org.freedesktop.nm_dispatcher.service
- Re-implement the dispatcher as a system-bus activated service that
NM calls on-demand, rather than an always running daemon
* src/Makefile.am
- Add callouts dir to includes to pick up dispatcher defines
* src/nm-device.c
- (nm_device_state_changed): call dispatcher on device activated/
deactivated
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_set_vpn_state): call dispatcher when VPN connections
go up and down
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_call_dispatcher): helper to call dispatcher
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3607 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_merge_ip4_config): new function; merge settings from an
NMSettingIP4Config to an NMIP4Config object
* src/nm-device.c
- (merge_ip4_config): move to NetworkManagerUtils.c
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): merge in user-specified settings
too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3580 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
(force-commit to fix wrong comment and partial commit of r2685; this
commit actually applies to r2685)
* src/NetworkManagerUtils.c
- (nm_utils_same_ssid): add "ignore_trailing_null" parameter which
ignores trailing nulls in the SSID to work around mismatches in
expectations between WEXT and what the info-daemon passes back. The
info-daemon would pass back the correct length, but due to the
ESSID length issues with WEXT 22 and greater and wpa_supplicant,
the device would always have an SSID + 1 depending on what versions
of wpa_supplicant, the kernel, and NM you have. This was most often
visible by just quitting the applet and relaunching, which caused
NM to reassociated to the same network over again when reloading
the save networks.
* src/NetworkManagerPolicy.c
src/NetworkManagerUtils.h
src/nm-device-802-11-wireless.c
- Update for new parameter to nm_utils_same_ssid()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2686 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerUtils.c
- (nm_utils_escape_ssid): add "ignore_trailing_null" parameter which
ignores trailing nulls in the SSID to work around mismatches in
expectations between WEXT and what the info-daemon passes back. The
info-daemon would pass back the correct length, but due to the
ESSID length issues with WEXT 22 and greater and wpa_supplicant,
the device would always have an SSID + 1 depending on what versions
of wpa_supplicant, the kernel, and NM you have. This was most often
visible by just quitting the applet and relaunching, which caused
NM to reassociated to the same network over again when reloading
the save networks.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2685 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list.
We get signalled when it changes.
* libnm-glib/nm-client.c: Cache NMState and device list, we get signalled
when it changes.
* libnm-glib/nm-device.c: Cache the device state property.
* libnm-glib/nm-access-point.c: Cache the strength property.
* src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler.
The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0)
and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan
until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while
the device is down, activating, or activated (in case of A/B/G cards).
Remove some old dead ifdef'ed out code that used to configure wireless devices,
it's all done through supplicant now.
* src/supplicant-manager/nm-supplicant-interface.c: Fix the reference
counting issues with pending calls which caused leaks and crashes when
interface was removed (now that the interface actually gets removed).
* src/nm-call-store.c: Make a copy of data before running a foreach
with user callback on it - The most common usage pattern is to cancel
(and thus remove) all pending calls with foreach which would modify
the hash table we're iterating over.
* src/nm-manager.c: When a device is added, make sure it is "up". When
it's removed or disabled due to disabling wireless or networking, bring
it down.
* include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN.
* src/nm-device-802-11-wireless.c:
* src/nm-device-802-3-ethernet.c:
* src/nm-device.c:
- Remove "init" virtual function, all gobjects have a place for that
already (constructor).
- Replace "start" virtual function with "bring_up", devices can be
brought up and down more than just on startup now.
- Add "is_up" virtual function.
- Implement one way to bring a device down instead of previous 4 different
ways, each of witch did something different.
* src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice,
all it needs is the device interface.
Get rid of NMData.dev_list (3 members to go).
Get rif of NMData in a lot of places.
* gnome/libnm_glib/libnm_glib.c: Make it compile again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Threading removal related cleanups:
- Use the glib default main context. Remove the device main context
member from NMDevice, and the main_context member from NMData. Change
all the idle and timeout scheduler functions to use plain
g_idle_add() and g_timeout_add().
- As a side-effect of the first change, nm_dbus_manager_get() no longer
takes an argument; fix that up too.
- Remove all locking, which is useless since we no longer use threads. For
example, nm_get_device_by_iface_locked() has been removed. The global
device list lock, the AP List lock, and all static locks in
NetworkManagerPolicy.c have been removed. The locking utility functions
in NetworkManagerUtils.c have also been removed.
- Other cleanups in spacing and code style
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2205 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Big wpa_supplicant + dbus update; need latest wpa_supplicant from CVS
plus a few other patches from wpa_supplicant bugzilla.
* src/Makefile.am
src/NetworkManagerPolicy.c
src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
src/nm-ap-security-leap.c
src/nm-ap-security-wep.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-psk.c
src/nm-ap-security.c
src/nm-ap-security.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
src/supplicant-manager/nm-supplicant-interface.c
src/supplicant-manager/nm-supplicant-interface.h
src/supplicant-manager/nm-supplicant-marshal.list
src/supplicant-manager/nm-supplicant-settings-verify.c
src/supplicant-manager/nm-supplicant-settings-verify.h
- Move all connection management and association handling to
wpa_supplicant over dbus, rather than spawning a private copy
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2192 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Functionality to automatically add BSSIDs to the allowed-MAC list as
one roams from access point to access point on a given network:
* src/NetworkManagerUtils.c: Add nm_ethernet_addresses_are_equal(),
helper function to compare two ether_addr structures and return TRUE
if they contain the same MAC address.
* src/NetworkManagerUtils.h: Add nm_ethernet_addresses_are_equal()
prototype.
* src/nm-device-802-11-wireless.c: New function to update the BSSID
stored with the current AP. If the BSSID has indeed changed, we
send it out to the applet, allowing the allowed-MAC list to grow
automatically in response to roaming.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1739 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
First dump of wpa_supplicant-related code. It's not hooked up to
anything yet though. Thanks to Kay Sievers for
wpa_supplicant_wrapper.c, which formed the basis for this work,
and to Jouni Malinen for writing wpa_ctrl.c and wpa_ctrl.h.
* src/Makefile.am
src/wpa_ctrl.[ch]
- Add wpa_ctrl stuff from wpa_supplicant so we can talk to it
* src/NetworkManagerUtils.[ch]
- (nm_utils_supplicant_request, nm_utils_supplicant_request_with_check):
Add convenience functions for talking to wpa_supplicant
* src/nm-ap-security.[ch]
src/nm-ap-security-wep.c
src/nm-ap-security-wpa-psk.[ch]
- Update and implement real_write_supplicant_config functions
in all security types
- (nm_ap_security_wpa_psk_new_from_ap): implement in
nm-ap-security-wpa-psk.c
* src/nm-device-802-11-wireless.c
- (supplicant_cleanup, supplicant_watch_cb, supplicant_monitor_status_cb,
wpa_supplicant_start, wpa_supplicant_interface_init,
wpa_supplicant_send_network_config): add functions to talk to
wpa_supplicant and write network config to it
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1267 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move scanning code into NetworkManager rather than use iwlib's
iw_scan() function, so that we can figure out AP capabilities.
* NetworkManager.h
- Add AP capability bits
* src/NetworkManagerAP.[ch]
- Add capability field to NMAccessPoint structure
- Add WPA & RSN Information Element fields and accessor
functions to NMAccessPoint
* src/NetworkManagerDevice.c
- Remove usage of iw_scan
- Add scanning code to NetworkManager rather than use
iw_scan() from iwlib
* src/NetworkManagerUtils.[ch]
- (nm_dispose_scan_results): remove, unused
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1023 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Replace the "driver support level" stuff with capabilities. The
capability field is a bitfield that is more flexible than the
old driver support level thing. It's mostly so we can easily
figure out what supports WPA and what doesn't, but should be
quite useful later.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1007 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c:
* gnome/applet/applet.c:
* gnome/applet/nm-device.c:
* gnome/applet/nm-device.h:
* src/NetworkManagerUtils.c:
* src/NetworkManagerUtils.h:
* src/nm-dbus-device.c:
I've got a fever, and the only cure for it is less ioctl.
Make NM push IP data rather than make the applet open a socket
to the device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@960 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Peter Jones:
* Remove usage of varargs to fix crashes on PPC (RH #154336)
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Fix checking of return value from ioctl()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@592 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add debug code for socket/file descriptor leaks. We register every socket
that we open (except for stuff in dhcpcd/) for tracking, and print out the
list of sockets that we forgot to close on shutdown. This also consolidates
about 4 places where we opened sockets into 1 function in NetworkManagerUtils.c
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@559 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_about_cb): Add some more contributors
- (nmwa_update_state): show the applet when there's no connection
- Enable the "Stop/Resume all wireless devices" option in the
context menu
- New "no connection" icon
* src/NetworkManager.c
- (nm_poll_and_update_wireless_link_state): don't do anything if
wireless is disabled or we're asleep
* src/NetworkManagerDHCP.c
- Remove trailing "\n" on debug messages
* src/NetworkManagerDbus.c
- (nm_dbus_network_status_from_data): new state "asleep"
* src/NetworkManagerDevice.c
- Merge most of Peter Jones' "completion" patch that greatly reduces
latency and wait times for most operations
- (nm_device_wireless_scan): Don't scan when asleep
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): return no device when asleep
- (nm_policy_allowed_ap_list_update): From Bill Moss: merge properties
for all wireless devices on update, not just active device
* src/NetworkManagerUtils.c
- Merge Peter Jones' "completion" patch
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_wireless_enabled): bring down wireless devices when
we're told to disable them
- (nm_dbus_nm_sleep, nm_dbus_nm_wake): new functions for sleep/wake
* utils/nm-utils.h
- New variants of the warn/info/error/debug print functions that can take
variables rather than static strings
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@510 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): merge strength too
* src/NetworkManagerUtils.c
- (nm_lock_mutex, nm_register_mutex_desc): new calls to facilitate debugging
of locking issues by printing out prettier information than g_mutex_lock
- Print out names of mutexes registered with nm_register_mutex_desc()
- (nm_try_lock_mutex): don't do the waiting thing when trying to lock, causes
us to seemingly block here for too long
* src/NetworkManager.c
src/NetworkManagerAPList.c
src/NetworkManagerDevice.c
- Convert to using nm_lock_mutex/nm_unlock_mutex rather than the glib variants
so we get better debug information printed
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): reduce usage of nm_device_need_ap_switch()
since it sometimes has locking side effects
- (nm_device_get_association_pause_value): Reduce 802.11a card pause value to 8s
from 10s
- (nm_device_need_ap_switch): If we can't acquire the scan lock, return saying
we don't need a switch. This gets called often enough that we can't block
until the scan mutex is acquired, because we'll block on device activation
and a few other things, which hangs main thread for too long.
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): reduce the possiblity that
nm_device_need_ap_switch() will be called
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@407 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
