polyunfill: remove unix_chkpwd from /run/wrappers

note that it doesnt show in `webm` exports

README.md

@@ -22,7 +22,7 @@ you might specifically be interested in these files (elaborated further in #key-
 - my way of deploying dotfiles/configuring programs per-user:
   - [modules/fs/](./modules/fs/default.nix)
   - [modules/programs/](./modules/programs/default.nix)
-  - [modules/users.nix](./modules/users.nix)
+  - [modules/users/](./modules/users/default.nix)
 
 [nixpkgs]: https://github.com/NixOS/nixpkgs
 [sops]: https://github.com/Mic92/sops-nix
@@ -109,9 +109,10 @@ i.e. you might find value in using these in your own config:
     - `sane.programs.firefox.sandbox.whitelistWayland = true;  # allow it to render a wayland window`
     - `sane.programs.firefox.sandbox.extraHomePaths = [ "Downloads" ];  # allow it read/write access to ~/Downloads`
     - integrated with `fs` and `persist` modules so that programs' config files and persisted data stores are linked into the sandbox w/o any extra involvement.
-- `modules/users.nix`
+- `modules/users/`
   - convenience layer atop the above modules so that you can just write
     `fs.".config/git"` instead of `fs."/home/colin/.config/git"`
+  - per-user services managed by [s6-rc](https://www.skarnet.org/software/s6-rc/)
 
 some things in here could easily find broader use. if you would find benefit in
 them being factored out of my config, message me and we could work to make that happen.

TODO.md

@@ -1,10 +1,34 @@
 ## BUGS
+- moby: megapixels doesn't load in sandbox
+- when moby wlan is explicitly set down (via ip link set wlan0 down), /var/lib/trust-dns/dhcp-configs doesn't get reset
+  - `ip monitor` can detect those manual link state changes (NM-dispatcher it seems cannot)
+  - or try dnsmasq?
+- trust-dns: can't recursively resolve api.mangadex.org
+  - and *sometimes* apple.com fails
+- wg-ovpnd-* interfaces don't work, because i use the same keys across all hosts...
+  - and if i had them differ and simultaneously online, then i'd exceed the OVPN machine count.
+  - i should at least have them be up'd only on-demand.
+- sandbox: link cache means that if i update ~/.config/... files inline, sandboxed programs still see the old version
+- mpv: audiocast has mpv sending its output to the builtin speakers unless manually changed
+- mpv: no way to exit fullscreen video on moby
+  - uosc hides controls on FS, and touch doesn't support unhiding
+- Signal restart loop drains battery
+  - decrease s6 restart time?
+- `ssh` access doesn't grant same linux capabilities as login
 - ringer (i.e. dino incoming call) doesn't prevent moby from sleeping
 - sway mouse/kb hotplug doesn't work
-- `nix` operations from lappy hang when `desko` is unreachable
+- sysvol (volume overlay): when casting with `blast`, sysvol doesn't react to volume changes
-  - could at least direct the cache to `http://desko-hn:5001`
+- moby: kaslr is effectively disabled
+  - `dmesg | grep "KASLR disabled due to lack of seed"`
+  - fix by adding `kaslrseed` to uboot script before `booti`
+    - <https://github.com/armbian/build/pull/4352>
+    - not sure how that's supposed to work with tow-boot; maybe i should just update tow-boot
+- moby: bpf is effectively disabled?
+  - `dmesg | grep 'systemd[1]: bpf-lsm: Failed to load BPF object: No such process'`
+  - `dmesg | grep 'hid_bpf: error while preloading HID BPF dispatcher: -22'`
 
 ## REFACTORING:
+- REMOVE DEPRECATED `crypt` from sftpgo_auth_hook
 - consolidate ~/dev and ~/ref
   - ~/dev becomes a link to ~/ref/cat/mine
 - fold hosts/common/home/ssh.nix -> hosts/common/users/colin.nix
@@ -21,13 +45,15 @@
 
 ### upstreaming
 - add updateScripts to all my packages in nixpkgs
-- REVIEW/integrate jellyfin dataDir config: <https://github.com/NixOS/nixpkgs/pull/233617>
 
 #### upstreaming to non-nixpkgs repos
 - gtk: build schemas even on cross compilation: <https://github.com/NixOS/nixpkgs/pull/247844>
 
 
 ## IMPROVEMENTS:
+- systemd/journalctl: use a less shit pager
+  - there's an env var for it: SYSTEMD_PAGER? and a flag for journalctl
+
 ### security/resilience
 - validate duplicity backups!
 - encrypt more ~ dirs (~/archives, ~/records, ..?)
@@ -45,7 +71,7 @@
     - <https://github.com/flatpak/xdg-dbus-proxy>
   - remove `.ssh` access from Firefox!
     - limit access to `~/knowledge/secrets` through an agent that requires GUI approval, so a firefox exploit can't steal all my logins
-  - port sane-sandboxed to a compiled language (hare?)
+  - port sanebox to a compiled language (hare?)
     - it adds like 50-70ms launch time _on my laptop_. i'd hate to know how much that is on the pinephone.
   - remove /run/wrappers from the sandbox path
     - they're mostly useless when using no-new-privs, just an opportunity to forget to specify deps
@@ -56,6 +82,7 @@
   - integrate `nix check` into Gitea actions?
 
 ### user experience
+- rofi: sort items case-insensitively
 - xdg-desktop-portal shouldn't kill children on exit
   - *maybe* a job for `setsid -f`?
 - replace starship prompt with something more efficient
@@ -80,6 +107,8 @@
   - numberlink (generic name for Flow Free). not packaged in Nix
   - Neverball (https://neverball.org/screenshots.php). nix: as `neverball`
   - blurble (https://linuxphoneapps.org/games/app.drey.blurble/). nix: not as of 2024-02-05
+  - Trivia Quiz (https://linuxphoneapps.org/games/io.github.nokse22.trivia-quiz/)
+- sane-sync-music: remove empty dirs
 
 #### moby
 - fix cpuidle (gets better power consumption): <https://xnux.eu/log/077.html>
@@ -102,6 +131,8 @@
   - try Gradience tool specifically for theming adwaita? <https://linuxphoneapps.org/apps/com.github.gradienceteam.gradience/>
 
 #### non-moby
+- sane-tag-music: integrate `beets`/<https://beets.io/>
+  - this should be able to auto-tag a large part of my library
 - RSS: integrate a paywall bypass
   - e.g. self-hosted [ladder](https://github.com/everywall/ladder) (like 12ft.io)
 - neovim: set up language server (lsp; rnix-lsp; nvim-lspconfig)

flake.lock

@@ -24,11 +24,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1701473968,
+        "lastModified": 1712014858,
-        "narHash": "sha256-YcVE5emp1qQ8ieHUnxt1wCZCC3ZfAS+SRRWZ2TMda7E=",
+        "narHash": "sha256-sB4SWl2lX95bExY2gMFG5HIzvva5AVMJd4Igm+GpZNw=",
         "owner": "hercules-ci",
         "repo": "flake-parts",
-        "rev": "34fed993f1674c8d06d58b37ce1e0fe5eebcb9f5",
+        "rev": "9126214d0a59633752a136528f5f3b9aa8565b7d",
         "type": "github"
       },
       "original": {
@@ -61,11 +61,11 @@
         "nixpkgs-lib": "nixpkgs-lib"
       },
       "locked": {
-        "lastModified": 1711886936,
+        "lastModified": 1716120557,
-        "narHash": "sha256-D2WENp9GuaCostvNcQ7vElekk0V5cuMdnFZ7NfRhVrQ=",
+        "narHash": "sha256-rvNq9YolMY1DRMgwdAti8qwNDjkhTsotSWa15/Ch7+A=",
         "owner": "nix-community",
         "repo": "lib-aggregate",
-        "rev": "9c06929b83e57c18d125f1105ba6a423f24083d2",
+        "rev": "5fa64b174daa22fe0d20ebbcc0ec2c7905b503f1",
         "type": "github"
       },
       "original": {
@@ -99,11 +99,11 @@
         "treefmt-nix": "treefmt-nix"
       },
       "locked": {
-        "lastModified": 1705242886,
+        "lastModified": 1715804156,
-        "narHash": "sha256-TLj334vRwFtSym3m+NnKcNCnKKPNoTC/TDZL40vmOso=",
+        "narHash": "sha256-GtIHP86Cz1kD9xZO/cKbNQACHKdoT9WFbLJAq6W2EDY=",
         "owner": "nix-community",
         "repo": "nix-eval-jobs",
-        "rev": "6b03a93296faf174b97546fd573c8b379f523a8d",
+        "rev": "bb95091f6c6f38f6cfc215a1797a2dd466312c8b",
         "type": "github"
       },
       "original": {
@@ -121,11 +121,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1701208414,
+        "lastModified": 1703863825,
-        "narHash": "sha256-xrQ0FyhwTZK6BwKhahIkUVZhMNk21IEI1nUcWSONtpo=",
+        "narHash": "sha256-rXwqjtwiGKJheXB43ybM8NwWB8rO2dSRrEqes0S7F5Y=",
         "owner": "nix-community",
         "repo": "nix-github-actions",
-        "rev": "93e39cc1a087d65bcf7a132e75a650c44dd2b734",
+        "rev": "5163432afc817cf8bd1f031418d1869e4c9d5547",
         "type": "github"
       },
       "original": {
@@ -136,11 +136,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1703134684,
+        "lastModified": 1715037484,
-        "narHash": "sha256-SQmng1EnBFLzS7WSRyPM9HgmZP2kLJcPAz+Ug/nug6o=",
+        "narHash": "sha256-OUt8xQFmBU96Hmm4T9tOWTu4oCswCzoVl+pxSq/kiFc=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "d6863cbcbbb80e71cecfc03356db1cda38919523",
+        "rev": "ad7efee13e0d216bf29992311536fce1d3eefbef",
         "type": "github"
       },
       "original": {
@@ -152,11 +152,11 @@
     },
     "nixpkgs-lib": {
       "locked": {
-        "lastModified": 1711846064,
+        "lastModified": 1716079763,
-        "narHash": "sha256-cqfX0QJNEnge3a77VnytM0Q6QZZ0DziFXt6tSCV8ZSc=",
+        "narHash": "sha256-DGRfb7fO7c3XDS3twmuaV5NAGPPdU3W7Q35fjIZc8iY=",
         "owner": "nix-community",
         "repo": "nixpkgs.lib",
-        "rev": "90b1a963ff84dc532db92f678296ff2499a60a87",
+        "rev": "0df131b5ee4d928a4b664b6d0cd99cf134d6ab6b",
         "type": "github"
       },
       "original": {
@@ -167,11 +167,11 @@
     },
     "nixpkgs-next-unpatched": {
       "locked": {
-        "lastModified": 1712383280,
+        "lastModified": 1716573668,
-        "narHash": "sha256-YL8miM11o/jMqOwt5DsdyhPgh/JgCl1kOIzvX7ukniY=",
+        "narHash": "sha256-K+8vYJtu7X+qQ1Q66kYTheq0IKKVyPMOMclY9oJYnS8=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "7c74352f2f7eca1925729f5c9c80cb89df8e74a2",
+        "rev": "cc5c0d369b5e8f49705e2a2d7464e4b162804805",
         "type": "github"
       },
       "original": {
@@ -183,11 +183,11 @@
     },
     "nixpkgs-stable": {
       "locked": {
-        "lastModified": 1711819797,
+        "lastModified": 1716061101,
-        "narHash": "sha256-tNeB6emxj74Y6ctwmsjtMlzUMn458sBmwnD35U5KIM4=",
+        "narHash": "sha256-H0eCta7ahEgloGIwE/ihkyGstOGu+kQwAiHvwVoXaA0=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "2b4e3ca0091049c6fbb4908c66b05b77eaef9f0c",
+        "rev": "e7cc61784ddf51c81487637b3031a6dd2d6673a2",
         "type": "github"
       },
       "original": {
@@ -199,11 +199,11 @@
     },
     "nixpkgs-unpatched": {
       "locked": {
-        "lastModified": 1712398506,
+        "lastModified": 1716592782,
-        "narHash": "sha256-oopwPeBKBXQEw2BlyK2jEs2farZ5uMjAZU7H4FpGuGE=",
+        "narHash": "sha256-aGafFFAkQwkiBXo+ocx4sCco+L233JqlUZhVfXceaQY=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "c58702222e0a29fd01cc42d70737d699995f6389",
+        "rev": "2baa58d3488bd9cc4d53d6812509edc34a1c7e2a",
         "type": "github"
       },
       "original": {
@@ -223,11 +223,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1712237761,
+        "lastModified": 1716589021,
-        "narHash": "sha256-NoMBBCADTms3yx5BL+sbc7vfDivNiYULO6t9GBAsPt0=",
+        "narHash": "sha256-m7+ogvgw6tCk5P1H9OqS2yTFlZOus9I+Genv3PUWkno=",
         "owner": "nix-community",
         "repo": "nixpkgs-wayland",
-        "rev": "9b77653338f52da4b498abdf4835efb6ff6e453e",
+        "rev": "8746004cd97164c89f0997ea06642b819e5bc3fb",
         "type": "github"
       },
       "original": {
@@ -254,11 +254,11 @@
         "nixpkgs-stable": "nixpkgs-stable"
       },
       "locked": {
-        "lastModified": 1711855048,
+        "lastModified": 1716400300,
-        "narHash": "sha256-HxegAPnQJSC4cbEbF4Iq3YTlFHZKLiNTk8147EbLdGg=",
+        "narHash": "sha256-0lMkIk9h3AzOHs1dCL9RXvvN4PM8VBKb+cyGsqOKa4c=",
         "owner": "Mic92",
         "repo": "sops-nix",
-        "rev": "99b1e37f9fc0960d064a7862eb7adfb92e64fa10",
+        "rev": "b549832718b8946e875c016a4785d204fcfc2e53",
         "type": "github"
       },
       "original": {
@@ -291,11 +291,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1702979157,
+        "lastModified": 1711963903,
-        "narHash": "sha256-RnFBbLbpqtn4AoJGXKevQMCGhra4h6G2MPcuTSZZQ+g=",
+        "narHash": "sha256-N3QDhoaX+paWXHbEXZapqd1r95mdshxToGowtjtYkGI=",
         "owner": "numtide",
         "repo": "treefmt-nix",
-        "rev": "2961375283668d867e64129c22af532de8e77734",
+        "rev": "49dc4a92b02b8e68798abd99184f228243b6e3ac",
         "type": "github"
       },
       "original": {
@@ -311,11 +311,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1711371733,
+        "lastModified": 1715894399,
-        "narHash": "sha256-+brjlMyLVnVADY31sN82Ap0IsPE2WZEwHUd94sY6BXI=",
+        "narHash": "sha256-h1EdA/h74zgNPNEYbH+0mgOMlJgLVcxuZ8/ewsZlgEc=",
         "ref": "refs/heads/master",
-        "rev": "b9502e6f190752d327f8cee7fa4b139094bd7c16",
+        "rev": "e6f88f563bdd1700c04018951de4f69862646dd1",
-        "revCount": 237,
+        "revCount": 240,
         "type": "git",
         "url": "https://git.uninsane.org/colin/uninsane"
       },

flake.nix

@@ -108,20 +108,22 @@
       nixpkgs' = patchNixpkgs "master" nixpkgs-unpatched;
       nixpkgsCompiledBy = system: nixpkgs'.legacyPackages."${system}";
 
-      evalHost = { name, local, target, light ? false, nixpkgs ? nixpkgs' }: nixpkgs.lib.nixosSystem {
+      evalHost = { name, local, target, variant ? null, nixpkgs ? nixpkgs' }: nixpkgs.lib.nixosSystem {
         system = target;
         modules = [
           {
             nixpkgs.buildPlatform.system = local;
-            # nixpkgs.config.replaceStdenv = { pkgs }: pkgs.ccacheStdenv;
           }
           (optionalAttrs (local != target) {
             # XXX(2023/12/11): cache.nixos.org uses `system = ...` instead of `hostPlatform.system`, and that choice impacts the closure of every package.
             # so avoid specifying hostPlatform.system on non-cross builds, so i can use upstream caches.
             nixpkgs.hostPlatform.system = target;
           })
-          (optionalAttrs light {
+          (optionalAttrs (variant == "light") {
-            sane.enableSlowPrograms = false;
+            sane.maxBuildCost = 2;
+          })
+          (optionalAttrs (variant == "min") {
+            sane.maxBuildCost = 0;
           })
           (import ./hosts/instantiate.nix { hostName = name; })
           self.nixosModules.default
@@ -139,11 +141,13 @@
         hosts = {
           servo       = { name = "servo";  local = "x86_64-linux"; target = "x86_64-linux";  };
           desko       = { name = "desko";  local = "x86_64-linux"; target = "x86_64-linux";  };
-          desko-light = { name = "desko";  local = "x86_64-linux"; target = "x86_64-linux";  light = true; };
+          desko-light = { name = "desko";  local = "x86_64-linux"; target = "x86_64-linux";  variant = "light"; };
           lappy       = { name = "lappy";  local = "x86_64-linux"; target = "x86_64-linux";  };
-          lappy-light = { name = "lappy";  local = "x86_64-linux"; target = "x86_64-linux";  light = true; };
+          lappy-light = { name = "lappy";  local = "x86_64-linux"; target = "x86_64-linux";  variant = "light"; };
+          lappy-min =   { name = "lappy";  local = "x86_64-linux"; target = "x86_64-linux";  variant = "min"; };
           moby        = { name = "moby";   local = "x86_64-linux"; target = "aarch64-linux"; };
-          moby-light  = { name = "moby";   local = "x86_64-linux"; target = "aarch64-linux"; light = true; };
+          moby-light  = { name = "moby";   local = "x86_64-linux"; target = "aarch64-linux"; variant = "light"; };
+          moby-min  =   { name = "moby";   local = "x86_64-linux"; target = "aarch64-linux"; variant = "min"; };
           rescue      = { name = "rescue"; local = "x86_64-linux"; target = "x86_64-linux";  };
         };
         hostsNext = mapAttrs' (h: v: {
@@ -285,7 +289,7 @@
             # - sandbox friendliness (especially: `git` doesn't have to be run as root)
 
             if [ -n "$addr" ]; then
-              sudo nix store sign -r -k /run/secrets/nix_serve_privkey "$storePath"
+              sudo nix store sign -r -k /run/secrets/nix_signing_key "$storePath"
               # add more `-v` for more verbosity (up to 5).
               # builders-use-substitutes false: optimizes so that the remote machine doesn't try to get paths from its substituters.
               #   we already have all paths here, and the remote substitution is slow to check and SERIOUSLY flaky on moby in particular.
@@ -408,14 +412,17 @@
             desko-light = deployApp "desko-light" "desko" "switch";
             lappy       = deployApp "lappy"       "lappy" "switch";
             lappy-light = deployApp "lappy-light" "lappy" "switch";
+            lappy-min   = deployApp "lappy-min"   "lappy" "switch";
             moby        = deployApp "moby"        "moby"  "switch";
             moby-light  = deployApp "moby-light"  "moby"  "switch";
+            moby-min  =   deployApp "moby-min"    "moby"  "switch";
             moby-test   = deployApp "moby"        "moby"  "test";
             servo       = deployApp "servo"       "servo" "switch";
 
             # like `nixos-rebuild --flake . switch`
             self        = deployApp "$(hostname)"       "" "switch";
             self-light  = deployApp "$(hostname)-light" "" "switch";
+            self-min    = deployApp "$(hostname)-min"   "" "switch";
 
             type = "app";
             program = builtins.toString (pkgs.writeShellScript "deploy-all" ''
@@ -431,12 +438,16 @@
             desko-light = deployApp "desko-light" "desko" null;
             lappy       = deployApp "lappy"       "lappy" null;
             lappy-light = deployApp "lappy-light" "lappy" null;
+            lappy-min   = deployApp "lappy-min"   "lappy" null;
             moby        = deployApp "moby"        "moby"  null;
             moby-light  = deployApp "moby-light"  "moby"  null;
+            moby-min    = deployApp "moby-min"    "moby"  null;
             servo       = deployApp "servo"       "servo" null;
             type = "app";
             program = builtins.toString (pkgs.writeShellScript "predeploy-all" ''
-              # copy the -light variants first; this might be run while waiting on a full build. or the full build failed.
+              # copy the -min/-light variants first; this might be run while waiting on a full build. or the full build failed.
+              nix run '.#preDeploy.moby-min' -- "$@"
+              nix run '.#preDeploy.lappy-min' -- "$@"
               nix run '.#preDeploy.moby-light' -- "$@"
               nix run '.#preDeploy.lappy-light' -- "$@"
               nix run '.#preDeploy.desko-light' -- "$@"
@@ -541,6 +552,9 @@
               ''
                 # build minimally-usable hosts first, then their full image.
                 # this gives me a minimal image i can deploy or copy over, early.
+                ${checkHost "lappy-min"}
+                ${checkHost "moby-min"}
+
                 ${checkHost "desko-light"}
                 ${checkHost "moby-light"}
                 ${checkHost "lappy-light"}

hosts/by-name/desko/default.nix

@@ -4,18 +4,16 @@
     ./fs.nix
   ];
 
+  sane.services.trust-dns.asSystemResolver = false;  # TEMPORARY: TODO: re-enable trust-dns
+  # sane.programs.devPkgs.enableFor.user.colin = true;
   # sane.guest.enable = true;
 
-  # services.distccd.enable = true;
+  # don't enable wifi by default: it messes with connectivity.
-  # sane.programs.distcc.enableFor.user.guest = true;
+  # systemd.services.iwd.enable = false;
-
+  # systemd.services.wpa_supplicant.enable = false;
-  # TODO: remove emulation, but need to fix nixos-rebuild to moby for that.
-  # sane.roles.build-machine.emulation = true;
 
   sops.secrets.colin-passwd.neededForUsers = true;
 
-  sane.ports.openFirewall = true;  # for e.g. nix-serve
-
   sane.roles.build-machine.enable = true;
   sane.roles.client = true;
   sane.roles.dev-machine = true;
@@ -23,17 +21,14 @@
   sane.services.wg-home.enable = true;
   sane.services.wg-home.ip = config.sane.hosts.by-name."desko".wg-home.ip;
   sane.services.duplicity.enable = true;
-  sane.services.nixserve.secretKeyFile = config.sops.secrets.nix_serve_privkey.path;
 
-  sane.nixcache.substituters.desko = false;
   sane.nixcache.remote-builders.desko = false;
 
+  sane.programs.cups.enableFor.user.colin = true;
   sane.programs.sway.enableFor.user.colin = true;
   sane.programs.iphoneUtils.enableFor.user.colin = true;
   sane.programs.steam.enableFor.user.colin = true;
 
-  # sane.programs.devPkgs.enableFor.user.colin = true;
-
   sane.programs."gnome.geary".config.autostart = true;
   sane.programs.signal-desktop.config.autostart = true;
 
@@ -43,10 +38,6 @@
   # needed to use libimobiledevice/ifuse, for iphone sync
   services.usbmuxd.enable = true;
 
-  # don't enable wifi by default: it messes with connectivity.
-  systemd.services.iwd.enable = false;
-  systemd.services.wpa_supplicant.enable = false;
-
   # default config: https://man.archlinux.org/man/snapper-configs.5
   # defaults to something like:
   #   - hourly snapshots

hosts/by-name/lappy/default.nix

@@ -14,10 +14,12 @@
   boot.loader.efi.canTouchEfiVariables = false;
   sane.image.extraBootFiles = [ pkgs.bootpart-uefi-x86_64 ];
 
+  sane.programs.cups.enableFor.user.colin = true;
+  sane.programs.stepmania.enableFor.user.colin = true;
   sane.programs.sway.enableFor.user.colin = true;
+
   sane.programs."gnome.geary".config.autostart = true;
   sane.programs.signal-desktop.config.autostart = true;
-  sane.programs.stepmania.enableFor.user.colin = true;
 
   sops.secrets.colin-passwd.neededForUsers = true;
 

hosts/by-name/moby/default.nix

@@ -21,14 +21,10 @@
 
   sane.roles.client = true;
   sane.roles.handheld = true;
-  sane.zsh.showDeadlines = false;  # unlikely to act on them when in shell
+  sane.programs.zsh.config.showDeadlines = false;  # unlikely to act on them when in shell
   sane.services.wg-home.enable = true;
   sane.services.wg-home.ip = config.sane.hosts.by-name."moby".wg-home.ip;
 
-  # for some reason desko -> moby deploys are super flaky when desko is also a nixcache (not true of desko -> lappy deploys, though!)
-  # > unable to download 'http://desko:5001/<hash>.narinfo': Server returned nothing (no headers, no data) (52)
-  sane.nixcache.substituters.desko = false;
-
   # XXX colin: phosh doesn't work well with passwordless login,
   # so set this more reliable default password should anything go wrong
   users.users.colin.initialPassword = "147147";
@@ -62,18 +58,8 @@
   # HACK/TODO: make `programs.P.env.VAR` behave according to `mime.priority`
   sane.programs.firefox.env = lib.mkForce {};
   sane.programs.epiphany.env.BROWSER = "epiphany";
-
+  sane.programs.pipewire.config = {
-  # note the .conf.d approach: using ~/.config/pipewire/pipewire.conf directly breaks all audio,
+    # tune so Dino doesn't drop audio
-  # presumably because that deletes the defaults entirely whereas the .conf.d approach selectively overrides defaults
-  sane.user.fs.".config/pipewire/pipewire.conf.d/10-fix-dino-mic-cutout.conf".symlink.text = ''
-    # config docs: <https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/Config-PipeWire#properties>
-    # useful to run `pw-top` to see that these settings are actually having effect,
-    # and `pw-metadata` to see if any settings conflict (e.g. max-quantum < min-quantum)
-    #
-    # restart pipewire after editing these files:
-    # - `systemctl --user restart pipewire`
-    # - pipewire users will likely stop outputting audio until they are also restarted
-    #
     # there's seemingly two buffers for the mic (see: <https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/FAQ#pipewire-buffering-explained>)
     # 1. Pipewire buffering out of the driver and into its own member.
     # 2. Pipewire buffering into Dino.
@@ -84,11 +70,9 @@
     # `pw-metadata -n settings 0 clock.force-quantum 1024` reduces to about 1 error per second.
     # `pw-metadata -n settings 0 clock.force-quantum 2048` reduces to 1 error every < 10s.
     # pipewire default config includes `clock.power-of-two-quantum = true`
-    context.properties = {
+    min-quantum = 2048;
-      default.clock.min-quantum = 2048
+    max-quantum = 8192;
-      default.clock.max-quantum = 8192
+  };
-    }
-  '';
 
   boot.loader.efi.canTouchEfiVariables = false;
   # /boot space is at a premium. default was 20.
@@ -126,15 +110,7 @@
   '';
 
   # enable rotation sensor
-  hardware.sensor.iio.enable = true;
+  # hardware.sensor.iio.enable = true;
-
-  # TODO: move elsewhere...
-  systemd.services.ModemManager.serviceConfig = {
-    # N.B.: the extra "" in ExecStart serves to force upstream ExecStart to be ignored
-    ExecStart = [ "" "${pkgs.modemmanager}/bin/ModemManager --debug" ];
-    # --debug sets DEBUG level logging: so reset
-    ExecStartPost = [ "${pkgs.modemmanager}/bin/mmcli --set-logging=INFO" ];
-  };
 
   services.udev.extraRules = let
     chmod = "${pkgs.coreutils}/bin/chmod";

hosts/by-name/moby/gps.nix

@@ -64,6 +64,5 @@
     "dialout"  # TODO: figure out if dialout is required. that's for /dev/ttyUSB1, but geoclue probably doesn't read that?
   ];
 
-  sane.services.eg25-control.enable = true;
   sane.programs.where-am-i.enableFor.user.colin = true;
 }

hosts/by-name/moby/kernel.nix

@@ -40,35 +40,213 @@ let
   '';
 in
 {
-  boot.kernelPackages = pkgs.linuxPackagesFor pkgs.linux-megous;
+  # kernel compatibility (2024/05/22: 03dab630)
+  # - linux-megous: boots to ssh, desktop
+  #   - camera apps: megapixels (no cameras found), snapshot (no cameras found)
+  # - linux-postmarketos: boots to ssh. desktop ONLY if "anx7688" is in the initrd.availableKernelModules.
+  #   - camera apps: megapixels (both rear and front cameras work), `cam -l` (finds only the rear camera), snapshot (no cameras found)
+  # - linux-megous.override { withMegiPinephoneConfig = true; }: NO SSH, NO SIGNS OF LIFE
+  # - linux-megous.override { withFullConfig = false; }: boots to ssh, no desktop
+  #
+  boot.kernelPackages = pkgs.linuxPackagesFor (pkgs.linux-postmarketos.override {
+    withModemPower = true;
+  });
+  # boot.kernelPackages = pkgs.linuxPackagesFor pkgs.linux-megous;
+  # boot.kernelPackages = pkgs.linuxPackagesFor (pkgs.linux-megous.override {
+  #   withFullConfig = false;
+  # });
+  # boot.kernelPackages = pkgs.linuxPackagesFor (pkgs.linux-megous.override {
+  #   withMegiPinephoneConfig = true;  #< N.B.: does not boot as of 2024/05/22!
+  # });
   # boot.kernelPackages = pkgs.linuxPackagesFor pkgs.linux-manjaro;
   # boot.kernelPackages = pkgs.linuxPackagesFor pkgs.linux_latest;
 
-  # alternatively, apply patches directly to stock nixos kernel:
+  # nixpkgs.hostPlatform.linux-kernel becomes stdenv.hostPlatform.linux-kernel
-  # boot.kernelPatches = manjaroPatches ++ [
-  #   (patchDefconfig kernelConfig)
-  # ];
-
-  # configure nixos to build a compressed kernel image, since it doesn't usually do that for aarch64 target.
-  # without this i run out of /boot space in < 10 generations
   nixpkgs.hostPlatform.linux-kernel = {
     # defaults:
     name = "aarch64-multiplatform";
-    baseConfig = "defconfig";
+    # baseConfig: defaults to "defconfig";
-    DTB = true;
+    # baseConfig = "pinephone_defconfig";  #< N.B.: ignored by `pkgs.linux-megous`
-    autoModules = true;
+    DTB = true;  #< DTB: compile device tree blobs
-    preferBuiltin = true;
+    # autoModules (default: true): for config options not manually specified, answer `m` to anything which supports it.
-    # extraConfig = ...
+    # - this effectively builds EVERY MODULE SUPPORTED.
-    # ^-- raspberry pi stuff: we don't need it.
+    autoModules = true;  #< N.B.: ignored by `pkgs.linux-megous`
+    # preferBuiltin (default: false; true for rpi): for config options which default to `Y` upstream, build them as `Y` (overriding `autoModules`)
+    # preferBuiltin = false;
 
+    # build a compressed kernel image: without this i run out of /boot space in < 10 generations
     # target = "Image";  # <-- default
     target = "Image.gz";  # <-- compress the kernel image
     # target = "zImage";  # <-- confuses other parts of nixos :-(
   };
 
+  # boot.initrd.kernelModules = [
+  #   "drm"  #< force drm to be plugged
+  # ];
+  boot.initrd.availableKernelModules = [
+    # see <repo:postmarketOS/pmaports:device/main/device-pine64-pinephone/modules-initfs>
+    # - they include sun6i_mipi_dsi sun4i_drm pwm_sun4i sun8i_mixer anx7688 gpio_vibra pinephone_keyboard
+    "anx7688" #< required for display initialization and functional cameras
+    # full list of modules active post-boot with the linux-megous kernel + autoModules=true:
+    # - `lsmod | sort | cut -d ' ' -f 1`
+    # "8723cs"
+    # "axp20x_adc"  #< NOT FOUND in megous-no-autoModules
+    # "axp20x_battery"
+    # "axp20x_pek"
+    # "axp20x_usb_power"
+    # "backlight"
+    # "blake2b_generic"
+    # "bluetooth"
+    # "bridge"
+    # "btbcm"
+    # "btqca"
+    # "btrfs"
+    # "btrtl"
+    # "cec"
+    # "cfg80211"
+    # "chacha_neon"
+    # "crc_ccitt"
+    # "crct10dif_ce"
+    # "crypto_engine"
+    # "display_connector"  #< NOT FOUND in pmos
+    # "drm"
+    # "drm_display_helper"
+    # "drm_dma_helper"
+    # "drm_kms_helper"
+    # "drm_shmem_helper"
+    # "dw_hdmi"
+    # "dw_hdmi_cec"  #< NOT FOUND in pmos
+    # "dw_hdmi_i2s_audio"
+    # "ecc"
+    # "ecdh_generic"
+    # "fuse"
+    # "gc2145"  #< NOT FOUND in megous-no-autoModules
+    # "goodix_ts"
+    # "gpio_vibra"  #< NOT FOUND in megous-no-autoModules
+    # "gpu_sched"
+    # "hci_uart"
+    # "i2c_gpio"
+    # "inv_mpu6050"  #< NOT FOUND in megous-no-autoModules
+    # "inv_mpu6050_i2c"  #< NOT FOUND in megous-no-autoModules
+    # "inv_sensors_timestamp"  #< NOT FOUND in megous-no-autoModules
+    # "ip6t_rpfilter"
+    # "ip6_udp_tunnel"
+    # "ip_set"
+    # "ip_set_hash_ipport"
+    # "ip_tables"
+    # "ipt_rpfilter"
+    # "joydev"
+    # "led_class_flash"  #< NOT FOUND in megous-no-autoModules
+    # "leds_sgm3140"  #< NOT FOUND in megous-no-autoModules
+    # "ledtrig_pattern"  #< NOT FOUND in megous-no-autoModules
+    # "libarc4"
+    # "libchacha"
+    # "libchacha20poly1305"
+    # "libcrc32c"
+    # "libcurve25519_generic"
+    # "lima"
+    # "llc"
+    # "mac80211"
+    # "macvlan"
+    # "mc"
+    # "modem_power"
+    # "mousedev"
+    # "nf_conntrack"
+    # "nf_defrag_ipv4"
+    # "nf_defrag_ipv6"
+    # "nf_log_syslog"
+    # "nf_nat"
+    # "nfnetlink"
+    # "nf_tables"
+    # "nft_chain_nat"
+    # "nft_compat"
+    # "nls_cp437"
+    # "nls_iso8859_1"
+    # "nvmem_reboot_mode"
+    # "ov5640"
+    # "panel_sitronix_st7703"
+    # "phy_sun6i_mipi_dphy"
+    # "pinctrl_axp209"  #< NOT FOUND in pmos
+    # "pinephone_keyboard"  #< NOT FOUND in megous-no-autoModules
+    # "poly1305_neon"
+    # "polyval_ce"
+    # "polyval_generic"
+    # "ppkb_manager"  #< NOT FOUND in megous-no-autoModules
+    # "pwm_bl"
+    # "pwm_sun4i"
+    # "qrtr"
+    # "raid6_pq"
+    # "rfkill"
+    # "rtw88_8703b"
+    # "rtw88_8723cs"
+    # "rtw88_8723x"
+    # "rtw88_core"
+    # "rtw88_sdio"
+    # "sch_fq_codel"
+    # "sm4"
+    # "snd_soc_bt_sco"
+    # "snd_soc_ec25"  #< NOT FOUND in megous-no-autoModules
+    # "snd_soc_hdmi_codec"
+    # "snd_soc_simple_amplifier"
+    # "snd_soc_simple_card"
+    # "snd_soc_simple_card_utils"
+    # "stk3310"  #< NOT FOUND in megous-no-autoModules
+    # "st_magn"
+    # "st_magn_i2c"
+    # "st_magn_spi"  #< NOT FOUND in pmos
+    # "stp"
+    # "st_sensors"
+    # "st_sensors_i2c"
+    # "st_sensors_spi"  #< NOT FOUND in pmos
+    # "sun4i_drm"
+    # "sun4i_i2s"
+    # "sun4i_lradc_keys"  #< NOT FOUND in megous-no-autoModules
+    # "sun4i_tcon"
+    # "sun50i_codec_analog"
+    # "sun6i_csi"
+    # "sun6i_dma"
+    # "sun6i_mipi_dsi"
+    # "sun8i_a33_mbus"  #< NOT FOUND in megous-no-autoModules
+    # "sun8i_adda_pr_regmap"
+    # "sun8i_ce"  #< NOT FOUND in pmos
+    # "sun8i_codec"  #< NOT FOUND in megous-no-autoModules
+    # "sun8i_di"  #< NOT FOUND in megous-no-autoModules
+    # "sun8i_drm_hdmi"
+    # "sun8i_mixer"
+    # "sun8i_rotate"  #< NOT FOUND in megous-no-autoModules
+    # "sun8i_tcon_top"
+    # "sun9i_hdmi_audio"  #< NOT FOUND in megous-no-autoModules
+    # "sunxi_wdt"  #< NOT FOUND in pmos
+    # "tap"
+    # "typec"  #< NOT FOUND in pmos
+    # "udp_tunnel"
+    # "uio"  #< NOT FOUND in pmos
+    # "uio_pdrv_genirq"
+    # "v4l2_async"
+    # "v4l2_cci" #< NOT FOUND in pmos
+    # "v4l2_flash_led_class"  #< NOT FOUND in megous-no-autoModules
+    # "v4l2_fwnode"
+    # "v4l2_mem2mem"
+    # "videobuf2_common"
+    # "videobuf2_dma_contig"
+    # "videobuf2_memops"
+    # "videobuf2_v4l2"
+    # "videodev"
+    # "wireguard"
+    # "xor"
+    # "x_tables"
+    # "xt_conntrack"
+    # "xt_LOG"
+    # "xt_nat"
+    # "xt_pkttype"
+    # "xt_set"
+    # "xt_tcpudp"
+    # "zram"
+  ];
+
   # disable proximity sensor.
   # the filtering/calibration is bad that it causes the screen to go fully dark at times.
-  boot.blacklistedKernelModules = [ "stk3310" ];
+  # boot.blacklistedKernelModules = [ "stk3310" ];
 
   boot.kernelParams = [
     # without this some GUI apps fail: `DRM_IOCTL_MODE_CREATE_DUMB failed: Cannot allocate memory`
@@ -78,8 +256,12 @@ in
     #
     # the default CMA seems to be 32M.
     # i was running fine with 256MB from 2022/07-ish through 2022/12-ish, but then the phone quit reliably coming back from sleep (phosh): maybe a memory leak?
+    # bumped to 512M on 2023/01
+    # bumped to 1536M on 2024/05
     # `cat /proc/meminfo` to see CmaTotal/CmaFree if interested in tuning this.
-    "cma=512M"
+    # kernel param mentioned here: <https://cateee.net/lkddb/web-lkddb/CMA_SIZE_PERCENTAGE.html>
+    # i think cma mem isn't exclusive -- it can be used as ordinary `malloc`, still. i heard someone suggest the OS default should just be 50% memory to CMA.
+    "cma=1536M"
     # 2023/10/20: potential fix for the lima (GPU) timeout bugs:
     # - <https://gitlab.com/postmarketOS/pmaports/-/issues/805#note_890467824>
     "lima.sched_timeout_ms=2000"

hosts/by-name/servo/default.nix

@@ -15,20 +15,19 @@
   };
 
   sane.roles.build-machine.enable = true;
-  sane.zsh.showDeadlines = false;  # ~/knowledge doesn't always exist
+  sane.programs.zsh.config.showDeadlines = false;  # ~/knowledge doesn't always exist
   sane.programs.consoleUtils.suggestedPrograms = [
     "consoleMediaUtils"  # notably, for go2tv / casting
     "pcConsoleUtils"
     "sane-scripts.stop-all-servo"
   ];
   sane.services.dyn-dns.enable = true;
+  sane.services.trust-dns.asSystemResolver = false;  # TODO: enable once it's all working well
   sane.services.wg-home.enable = true;
   sane.services.wg-home.visibleToWan = true;
   sane.services.wg-home.forwardToWan = true;
   sane.services.wg-home.routeThroughServo = false;
   sane.services.wg-home.ip = config.sane.hosts.by-name."servo".wg-home.ip;
-  sane.nixcache.substituters.servo = false;
-  sane.nixcache.substituters.desko = false;
   sane.nixcache.remote-builders.desko = false;
   sane.nixcache.remote-builders.servo = false;
   # sane.services.duplicity.enable = true;  # TODO: re-enable after HW upgrade

hosts/by-name/servo/net.nix

@@ -38,6 +38,39 @@ in
     #   FallbackDNS=1.1.1.1 9.9.9.9
     # '';
 
+    # tun-sea config
+    sane.dns.zones."uninsane.org".inet.A."doof.tunnel" = "205.201.63.12";
+    sane.dns.zones."uninsane.org".inet.AAAA."doof.tunnel" = "2602:fce8:106::51";
+    networking.wireguard.interfaces.wg-doof = let
+      ip = "${pkgs.iproute2}/bin/ip";
+    in {
+      privateKeyFile = config.sops.secrets.wg_doof_privkey.path;
+      # wg is active only in this namespace.
+      # run e.g. ip netns exec doof <some command like ping/curl/etc, it'll go through wg>
+      #   sudo ip netns exec doof ping www.google.com
+      interfaceNamespace = "doof";
+      ips = [
+        "205.201.63.12/32"
+        "2602:fce8:106::51/128"
+      ];
+      peers = [
+        {
+          publicKey = "nuESyYEJ3YU0hTZZgAd7iHBz1ytWBVM5PjEL1VEoTkU=";
+          # TODO: configure DNS within the doof ns and use tun-sea.doof.net endpoint
+          # endpoint = "tun-sea.doof.net:53263";
+          endpoint = "205.201.63.44:53263";
+          allowedIPs = [ "0.0.0.0/0" "::/0" ];
+          persistentKeepalive = 25; #< keep the NAT alive
+        }
+      ];
+      preSetup = ''
+        ${ip} netns add doof || (test -e /run/netns/doof && echo "doof already exists")
+      '';
+      postShutdown = ''
+        ${ip} netns delete doof || echo "couldn't delete doof"
+      '';
+    };
+
     # OVPN CONFIG (https://www.ovpn.com):
     # DOCS: https://nixos.wiki/wiki/WireGuard
     # if you `systemctl restart wireguard-wg-ovpns`, make sure to also restart any other services in `NetworkNamespacePath = .../ovpns`.

hosts/by-name/servo/services/calibre.nix

@@ -24,7 +24,7 @@ lib.mkIf false
   # services.calibre-web.options.calibreLibrary = svc-dir;
 
   services.nginx.virtualHosts."calibre.uninsane.org" = {
-    addSSL = true;
+    forceSSL = true;
     enableACME = true;
     locations."/" = {
       proxyPass = "http://${ip}:${builtins.toString port}";

hosts/by-name/servo/services/coturn.nix

@@ -24,50 +24,64 @@
 #   that is NOT the case when the STUN server and client A are on the same LAN
 #   even if client A contacts the STUN server via its WAN address with port reflection enabled.
 #   hence, there's no obvious way to put the STUN server on the same LAN as either client and expect the rest to work.
+# - there an old version which *half worked*, which is:
+#   - run the turn server in the root namespace.
+#   - bind the turn server to the veth connecting it to the VPN namespace (so it sends outgoing traffic to the right place).
+#   - NAT the turn port range from VPN into root namespace (so it receives incomming traffic).
+#   - this approach would fail the prosody conversations.im check, but i didn't notice *obvious* call routing errors.
+#
+# debugging:
+# - log messages like 'usage: realm=<turn.uninsane.org>, username=<1715915193>, rp=14, rb=1516, sp=8, sb=684'
+#   - rp = received packets
+#   - rb = received bytes
+#   - sp = sent packets
+#   - sb = sent bytes
 { lib, ... }:
 let
-  # TODO: this range could be larger, but right now that's costly because each element is its own UPnP forward
+  # TURN port range (inclusive).
-  # TURN port range (inclusive)
+  # default coturn behavior is to use the upper quarter of all ports. i.e. 49152 - 65535.
-  turnPortLow = 49152;
+  # i believe TURN allocations expire after either 5 or 10 minutes of inactivity.
-  turnPortHigh = 49167;
+  turnPortLow = 49152; # 49152 = 0xc000
+  turnPortHigh = turnPortLow + 256;
   turnPortRange = lib.range turnPortLow turnPortHigh;
 in
 {
-  sane.ports.ports = lib.mkMerge ([
+  # the port definitions are only needed if running in the root net namespace
-    {
+  # sane.ports.ports = lib.mkMerge ([
-      "3478" = {
+  #   {
-        # this is the "control" port.
+  #     "3478" = {
-        # i.e. no client data is forwarded through it, but it's where clients request tunnels.
+  #       # this is the "control" port.
-        protocol = [ "tcp" "udp" ];
+  #       # i.e. no client data is forwarded through it, but it's where clients request tunnels.
-        # visibleTo.lan = true;
+  #       protocol = [ "tcp" "udp" ];
-        # visibleTo.wan = true;
+  #       # visibleTo.lan = true;
-        visibleTo.ovpn = true;
+  #       # visibleTo.wan = true;
-        description = "colin-stun-turn";
+  #       visibleTo.ovpn = true;  # forward traffic from the VPN to the root NS
-      };
+  #       description = "colin-stun-turn";
-      "5349" = {
+  #     };
-        # the other port 3478 also supports TLS/DTLS, but presumably clients wanting TLS will default 5349
+  #     "5349" = {
-        protocol = [ "tcp" ];
+  #       # the other port 3478 also supports TLS/DTLS, but presumably clients wanting TLS will default 5349
-        # visibleTo.lan = true;
+  #       protocol = [ "tcp" ];
-        # visibleTo.wan = true;
+  #       # visibleTo.lan = true;
-        visibleTo.ovpn = true;
+  #       # visibleTo.wan = true;
-        description = "colin-stun-turn-over-tls";
+  #       visibleTo.ovpn = true;
-      };
+  #       description = "colin-stun-turn-over-tls";
-    }
+  #     };
-  ] ++ (builtins.map
+  #   }
-    (port: {
+  # ] ++ (builtins.map
-      "${builtins.toString port}" = let
+  #   (port: {
-        count = port - turnPortLow + 1;
+  #     "${builtins.toString port}" = let
-        numPorts = turnPortHigh - turnPortLow + 1;
+  #       count = port - turnPortLow + 1;
-      in {
+  #       numPorts = turnPortHigh - turnPortLow + 1;
-        protocol = [ "tcp" "udp" ];
+  #     in {
-        # visibleTo.lan = true;
+  #       protocol = [ "tcp" "udp" ];
-        # visibleTo.wan = true;
+  #       # visibleTo.lan = true;
-        visibleTo.ovpn = true;
+  #       # visibleTo.wan = true;
-        description = "colin-turn-${builtins.toString count}-of-${builtins.toString numPorts}";
+  #       visibleTo.ovpn = true;
-      };
+  #       description = "colin-turn-${builtins.toString count}-of-${builtins.toString numPorts}";
-    })
+  #     };
-    turnPortRange
+  #   })
-  ));
+  #   turnPortRange
+  # ));
 
   services.nginx.virtualHosts."turn.uninsane.org" = {
     # allow ACME to procure a cert via nginx for this domain
@@ -103,22 +117,28 @@ in
   services.coturn.realm = "turn.uninsane.org";
   services.coturn.cert = "/var/lib/acme/turn.uninsane.org/fullchain.pem";
   services.coturn.pkey = "/var/lib/acme/turn.uninsane.org/key.pem";
+
+  #v disable to allow unauthenticated access (or set `services.coturn.no-auth = true`)
   services.coturn.use-auth-secret = true;
   services.coturn.static-auth-secret-file = "/var/lib/coturn/shared_secret.bin";
-  services.coturn.lt-cred-mech = true;
+  services.coturn.lt-cred-mech = true; #< XXX: use-auth-secret overrides lt-cred-mech
+
   services.coturn.min-port = turnPortLow;
   services.coturn.max-port = turnPortHigh;
   # services.coturn.secure-stun = true;
   services.coturn.extraConfig = lib.concatStringsSep "\n" [
     "verbose"
-    # "Verbose"  #< even MORE verbosity than "verbose"
+    # "Verbose"  #< even MORE verbosity than "verbose"  (it's TOO MUCH verbosity really)
-    # "no-multicast-peers"  # disables sending to IPv4 broadcast addresses (e.g. 224.0.0.0/3)
+    "no-multicast-peers"  # disables sending to IPv4 broadcast addresses (e.g. 224.0.0.0/3)
-    "listening-ip=10.0.1.5"
+    # "listening-ip=10.0.1.5" "external-ip=185.157.162.178"  #< 2024/04/25: works, if running in root namespace
+    "listening-ip=185.157.162.178" "external-ip=185.157.162.178"
+
+    # old attempts:
     # "external-ip=185.157.162.178/10.0.1.5"
-    "external-ip=185.157.162.178"
     # "listening-ip=10.78.79.51"  # can be specified multiple times; omit for *
     # "external-ip=97.113.128.229/10.78.79.51"
     # "external-ip=97.113.128.229"
     # "mobility"  # "mobility with ICE (MICE) specs support" (?)
   ];
+  systemd.services.coturn.serviceConfig.NetworkNamespacePath = "/run/netns/ovpns";
 }

hosts/by-name/servo/services/cryptocurrencies/clightning-sane/clightning-sane

@@ -1,6 +1,22 @@
 #!/usr/bin/env nix-shell
 #!nix-shell -i python3 -p "python3.withPackages (ps: [ ps.pyln-client ])"
 
+"""
+clightning-sane: helper to perform common Lightning node admin operations:
+- view channel balances
+- rebalance channels
+
+COMMON OPERATIONS:
+- view channel balances: `clightning-sane status`
+- rebalance channels to improve routability (without paying any fees): `clightning-sane autobalance`
+
+FULL OPERATION:
+- `clightning-sane status --full`
+  - `P$`: represents how many msats i've captured in fees from this channel.
+  - `COST`: rough measure of how much it's "costing" me to let my channel partner hold funds on his side of the channel.
+            this is based on the notion that i only capture fees from outbound transactions, and so the channel partner holding all liquidity means i can't capture fees on that liquidity.
+"""
+
 # pyln-client docs: <https://github.com/ElementsProject/lightning/tree/master/contrib/pyln-client>
 # terminology:
 # - "scid": "Short Channel ID", e.g. 123456x7890x0
@@ -726,7 +742,7 @@ def main():
     logging.basicConfig()
     logger.setLevel(logging.INFO)
 
-    parser = argparse.ArgumentParser(description="rebalance lightning channel balances")
+    parser = argparse.ArgumentParser(description=__doc__)
     parser.add_argument("--verbose", action="store_true", help="more logging")
     parser.add_argument("--min-msat", default="999", help="min transaction size")
     parser.add_argument("--max-msat", default="1000000", help="max transaction size")

hosts/by-name/servo/services/default.nix

@@ -20,7 +20,6 @@
     ./navidrome.nix
     ./nginx.nix
     ./nixos-prebuild.nix
-    ./nixserve.nix
     ./ntfy
     ./pict-rs.nix
     ./pleroma.nix

hosts/by-name/servo/services/export/default.nix

@@ -2,7 +2,7 @@
 {
   imports = [
     ./nfs.nix
-    ./sftpgo.nix
+    ./sftpgo
   ];
 
   users.groups.export = {};

hosts/by-name/servo/services/export/sftpgo/default.nix

@@ -9,24 +9,32 @@
 
 { config, lib, pkgs, sane-lib, ... }:
 let
-  sftpgo_external_auth_hook = pkgs.static-nix-shell.mkPython3Bin {
+  external_auth_hook = pkgs.static-nix-shell.mkPython3Bin {
-    pname = "sftpgo_external_auth_hook";
+    pname = "external_auth_hook";
     srcRoot = ./.;
   };
-in
-{
   # Client initiates a FTP "control connection" on port 21.
   # - this handles the client -> server commands, and the server -> client status, but not the actual data
   # - file data, directory listings, etc need to be transferred on an ephemeral "data port".
   # - 50000-50100 is a common port range for this.
   #   50000 is used by soulseek.
+  passiveStart = 50050;
+  passiveEnd   = 50070;
+in
+{
   sane.ports.ports = {
     "21" = {
       protocol = [ "tcp" ];
       visibleTo.lan = true;
-      visibleTo.wan = true;
+      # visibleTo.wan = true;
       description = "colin-FTP server";
     };
+    "990" = {
+      protocol = [ "tcp" ];
+      visibleTo.lan = true;
+      visibleTo.wan = true;
+      description = "colin-FTPS server";
+    };
   } // (sane-lib.mapToAttrs
     (port: {
       name = builtins.toString port;
@@ -37,12 +45,42 @@ in
         description = "colin-FTP server data port range";
       };
     })
-    (lib.range 50050 50100)
+    (lib.range passiveStart passiveEnd)
   );
 
+  # use nginx/acme to produce a cert for FTPS
+  services.nginx.virtualHosts."ftp.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+  };
+  sane.dns.zones."uninsane.org".inet.CNAME."ftp" = "native";
+
   services.sftpgo = {
     enable = true;
     group = "export";
+
+    package = lib.warnIf (lib.versionOlder "2.5.6" pkgs.sftpgo.version) "sftpgo update: safe to use nixpkgs' sftpgo but keep my own `patches`" pkgs.buildGoModule {
+      inherit (pkgs.sftpgo) name ldflags nativeBuildInputs doCheck subPackages postInstall passthru meta;
+      version = "2.5.6-unstable-2024-04-18";
+      src = pkgs.fetchFromGitHub {
+        # need to use > 2.5.6 for sftpgo_safe_fileinfo.patch to apply
+        owner = "drakkan";
+        repo = "sftpgo";
+        rev = "950cf67e4c03a12c7e439802cabbb0b42d4ee5f5";
+        hash = "sha256-UfiFd9NK3DdZ1J+FPGZrM7r2mo9xlKi0dsSlLEinYXM=";
+      };
+      vendorHash = "sha256-n1/9A2em3BCtFX+132ualh4NQwkwewMxYIMOphJEamg=";
+      patches = (pkgs.sftpgo.patches or []) ++ [
+        # fix for compatibility with kodi:
+        # ftp LIST operation returns entries over-the-wire like:
+        # - dgrwxrwxr-x 1 ftp ftp            9 Apr  9 15:05 Videos
+        # however not all clients understand all mode bits (like that `g`, indicating SGID / group sticky bit).
+        # instead, only send mode bits which are well-understood.
+        # the full set of bits, from which i filter, is found here: <https://pkg.go.dev/io/fs#FileMode>
+        ./safe_fileinfo.patch
+      ];
+    };
+
     settings = {
       ftpd = {
         bindings = [
@@ -58,16 +96,33 @@ in
             port = 21;
             debug = true;
           }
+          {
+            # binding this means any wireguard client can connect
+            address = "10.0.10.5";
+            port = 990;
+            debug = true;
+            tls_mode = 2;  # 2 = "implicit FTPS": client negotiates TLS before any FTP command.
+          }
+          {
+            # binding this means any LAN client can connect (also WAN traffic forwarded from the gateway)
+            address = "10.78.79.51";
+            port = 990;
+            debug = true;
+            tls_mode = 2;  # 2 = "implicit FTPS": client negotiates TLS before any FTP command.
+          }
         ];
 
         # active mode is susceptible to "bounce attacks", without much benefit over passive mode
         disable_active_mode = true;
         hash_support = true;
         passive_port_range = {
-          start = 50050;
+          start = passiveStart;
-          end = 50100;
+          end = passiveEnd;
         };
 
+        certificate_file = "/var/lib/acme/ftp.uninsane.org/full.pem";
+        certificate_key_file = "/var/lib/acme/ftp.uninsane.org/key.pem";
+
         banner = ''
           Welcome, friends, to Colin's FTP server! Also available via NFS on the same host, but LAN-only.
 
@@ -75,14 +130,14 @@ in
           Username: "anonymous"
           Password: "anonymous"
 
-          CONFIGURE YOUR CLIENT FOR "PASSIVE" mode, e.g. `ftp --passive uninsane.org`.
+          CONFIGURE YOUR CLIENT FOR "PASSIVE" MODE, e.g. `ftp --passive ftp.uninsane.org`.
           Please let me know if anything's broken or not as it should be. Otherwise, browse and transfer freely :)
         '';
 
       };
       data_provider = {
         driver = "memory";
-        external_auth_hook = "${sftpgo_external_auth_hook}/bin/sftpgo_external_auth_hook";
+        external_auth_hook = "${external_auth_hook}/bin/external_auth_hook";
         # track_quota:
         # - 0: disable quota tracking
         # - 1: quota is updated on every upload/delete, even if user has no quota restriction
@@ -95,6 +150,7 @@ in
   users.users.sftpgo.extraGroups = [
     "export"
     "media"
+    "nginx"  # to access certs
   ];
 
   systemd.services.sftpgo = {

hosts/by-name/servo/services/export/sftpgo/safe_fileinfo.patch

@@ -0,0 +1,32 @@
+diff --git a/internal/ftpd/handler.go b/internal/ftpd/handler.go
+index 036c3977..33211261 100644
+--- a/internal/ftpd/handler.go
++++ b/internal/ftpd/handler.go
+@@ -169,7 +169,7 @@ func (c *Connection) Stat(name string) (os.FileInfo, error) {
+ 		}
+ 		return nil, err
+ 	}
+-	return fi, nil
++	return vfs.NewFileInfo(name, fi.IsDir(), fi.Size(), fi.ModTime(), false), nil
+ }
+
+ // Name returns the name of this connection
+@@ -315,7 +315,17 @@ func (c *Connection) ReadDir(name string) (ftpserver.DirLister, error) {
+ 		}, nil
+ 	}
+
+-	return c.ListDir(name)
++	lister, err := c.ListDir(name)
++	if err != nil {
++		return nil, err
++	}
++	return &patternDirLister{
++		DirLister:      lister,
++		pattern:        "*",
++		lastCommand:    c.clientContext.GetLastCommand(),
++		dirName:        name,
++		connectionPath: c.clientContext.Path(),
++	}, nil
+ }
+
+ // GetHandle implements ClientDriverExtentionFileTransfer

hosts/by-name/servo/services/goaccess.nix

@@ -20,7 +20,7 @@
           --ignore-panel=HOSTS \
           --ws-url=wss://sink.uninsane.org:443/ws \
           --port=7890 \
-          -o /var/lib/uninsane/sink/index.html
+          -o /var/lib/goaccess/index.html
       '';
       ExecReload = "${pkgs.coreutils}/bin/kill -HUP $MAINPID";
       Type = "simple";
@@ -28,17 +28,19 @@
       RestartSec = "10s";
 
       # hardening
-      WorkingDirectory = "/tmp";
+      # TODO: run as `goaccess` user and add `goaccess` user to group `nginx`.
       NoNewPrivileges = true;
+      PrivateDevices = "yes";
       PrivateTmp = true;
       ProtectHome = "read-only";
-      ProtectSystem = "strict";
-      SystemCallFilter = "~@clock @cpu-emulation @debug @keyring @memlock @module @mount @obsolete @privileged @reboot @resources @setuid @swap @raw-io";
-      ReadOnlyPaths = "/";
-      ReadWritePaths = [ "/proc/self" "/var/lib/uninsane/sink" ];
-      PrivateDevices = "yes";
       ProtectKernelModules = "yes";
       ProtectKernelTunables = "yes";
+      ProtectSystem = "strict";
+      ReadOnlyPaths = [ "/var/log/nginx" ];
+      ReadWritePaths = [ "/proc/self" "/var/lib/goaccess" ];
+      StateDirectory = "goaccess";
+      SystemCallFilter = "~@clock @cpu-emulation @debug @keyring @memlock @module @mount @obsolete @privileged @reboot @resources @setuid @swap @raw-io";
+      WorkingDirectory = "/var/lib/goaccess";
     };
     after = [ "network.target" ];
     wantedBy = [ "multi-user.target" ];
@@ -49,7 +51,7 @@
     addSSL = true;
     enableACME = true;
     # inherit kTLS;
-    root = "/var/lib/uninsane/sink";
+    root = "/var/lib/goaccess";
 
     locations."/ws" = {
       proxyPass = "http://127.0.0.1:7890";

hosts/by-name/servo/services/jackett.nix

@@ -1,5 +1,6 @@
-{ ... }:
+{ lib, pkgs, ... }:
 
+lib.mkIf false  #< TODO: re-enable once confident of sandboxing
 {
   sane.persist.sys.byStore.plaintext = [
     # TODO: mode? we only need this to save Indexer creds ==> migrate to config?
@@ -12,6 +13,8 @@
   systemd.services.jackett.serviceConfig = {
     # run this behind the OVPN static VPN
     NetworkNamespacePath = "/run/netns/ovpns";
+    ExecStartPre = [ "${lib.getExe pkgs.sane-scripts.ip-check} --no-upnp --expect 185.157.162.178" ];  # abort if public IP is not as expected
+
     # patch jackett to listen on the public interfaces
     # ExecStart = lib.mkForce "${pkgs.jackett}/bin/Jackett --NoUpdates --DataFolder /var/lib/jackett/.config/Jackett --ListenPublic";
   };

hosts/by-name/servo/services/jellyfin.nix

@@ -75,7 +75,7 @@
   # Jellyfin multimedia server
   # this is mostly taken from the official jellfin.org docs
   services.nginx.virtualHosts."jelly.uninsane.org" = {
-    addSSL = true;
+    forceSSL = true;
     enableACME = true;
     # inherit kTLS;
 

hosts/by-name/servo/services/komga.nix

@@ -12,7 +12,7 @@ in
   services.komga.port = 11319;  # chosen at random
 
   services.nginx.virtualHosts."komga.uninsane.org" = {
-    addSSL = true;
+    forceSSL = true;
     enableACME = true;
     locations."/" = {
       proxyPass = "http://127.0.0.1:${builtins.toString port}";

hosts/by-name/servo/services/lemmy.nix

@@ -22,7 +22,7 @@ let
   #   #      "Change commandline flag to allow disabling video, since it is enabled by default"
   #   postPatch = (upstream.postPatch or "") + ''
   #     substituteInPlace src/validate.rs \
-  #       --replace 'if transcode_options.needs_reencode() {' 'if false {'
+  #       --replace-fail 'if transcode_options.needs_reencode() {' 'if false {'
   #   '';
   # });
 in {

hosts/by-name/servo/services/nginx.nix

@@ -89,6 +89,16 @@ in
         disable_symlinks on;
       '';
     };
+    locations."/share/Milkbags/" = {
+      alias = "/var/media/Videos/Milkbags/";
+      extraConfig = ''
+        # autoindex => render directory listings
+        autoindex on;
+        # don't follow any symlinks when serving files
+        # otherwise it allows a directory escape
+        disable_symlinks on;
+      '';
+    };
 
     # allow matrix users to discover that @user:uninsane.org is reachable via matrix.uninsane.org
     locations."= /.well-known/matrix/server".extraConfig =

hosts/by-name/servo/services/nixserve.nix

@@ -1,21 +0,0 @@
-{ config, ... }:
-
-{
-  services.nginx.virtualHosts."nixcache.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    # serverAliases = [ "nixcache" ];
-    locations."/".extraConfig = ''
-      proxy_pass http://localhost:${toString config.services.nix-serve.port};
-      proxy_set_header Host $host;
-      proxy_set_header X-Real-IP $remote_addr;
-      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-    '';
-  };
-
-  sane.dns.zones."uninsane.org".inet.CNAME."nixcache" = "native";
-
-  sane.services.nixserve.enable = true;
-  sane.services.nixserve.secretKeyFile = config.sops.secrets.nix_serve_privkey.path;
-}

hosts/by-name/servo/services/pleroma.nix

@@ -25,7 +25,7 @@ in
 
     config :pleroma, Pleroma.Web.Endpoint,
       url: [host: "fed.uninsane.org", scheme: "https", port: 443],
-      http: [ip: {127, 0, 0, 1}, port: 4000]
+      http: [ip: {127, 0, 0, 1}, port: 4040]
     #   secret_key_base: "{secrets.pleroma.secret_key_base}",
     #   signing_salt: "{secrets.pleroma.signing_salt}"
 
@@ -167,7 +167,7 @@ in
     enableACME = true;
     # inherit kTLS;
     locations."/" = {
-      proxyPass = "http://127.0.0.1:4000";
+      proxyPass = "http://127.0.0.1:4040";
       recommendedProxySettings = true;
       # documented: https://git.pleroma.social/pleroma/pleroma/-/blob/develop/installation/pleroma.nginx
       extraConfig = ''

hosts/by-name/servo/services/slskd.nix

@@ -7,7 +7,8 @@
 # debugging:
 # - soulseek is just *flaky*. if you see e.g. DNS errors, even though you can't replicate them via `dig` or `getent ahostsv4`, just give it 10 minutes to work out:
 #   - "Soulseek.AddressException: Failed to resolve address 'vps.slsknet.org': Resource temporarily unavailable"
-{ config, lib, ... }:
+{ config, lib, pkgs, ... }:
+
 {
   sane.persist.sys.byStore.plaintext = [
     { user = "slskd"; group = "media"; path = "/var/lib/slskd"; method = "bind"; }
@@ -68,12 +69,12 @@
     # flags.volatile = true;  # store searches and active transfers in RAM (completed transfers still go to disk). rec for btrfs/zfs
   };
 
-  systemd.services.slskd = {
+  systemd.services.slskd.serviceConfig = {
-    serviceConfig = {
     # run this behind the OVPN static VPN
     NetworkNamespacePath = "/run/netns/ovpns";
+    ExecStartPre = [ "${lib.getExe pkgs.sane-scripts.ip-check} --no-upnp --expect 185.157.162.178" ];  # abort if public IP is not as expected
+
     Restart = lib.mkForce "always";  # exits "success" when it fails to connect to soulseek server
     RestartSec = "60s";
   };
-  };
 }

hosts/by-name/servo/services/transmission.nix

@@ -26,6 +26,9 @@ let
   torrent-done = pkgs.writeShellApplication {
     name = "torrent-done";
     runtimeInputs = with pkgs; [
+      acl
+      coreutils
+      findutils
       rsync
       util-linux
     ];
@@ -52,12 +55,34 @@ let
 
       destructive mkdir -p "$(dirname "$MEDIA_DIR")"
       destructive rsync -arv "$TR_TORRENT_DIR/" "$MEDIA_DIR/"
+      # make the media rwx by anyone in the group
+      destructive find "$MEDIA_DIR" -type d -exec setfacl --recursive --modify d:g::rwx,o::rx {} \;
+      destructive find "$MEDIA_DIR" -type d -exec chmod g+rw,a+rx {} \;
+
+      # if there's a single directory inside the media dir, then inline that
+      subdirs=("$MEDIA_DIR"/*)
+      if [ ''${#subdirs} -eq 1 ]; then
+        dirname="''${subdirs[0]}"
+        if [ -d "$dirname" ]; then
+          mv "$dirname"/* "$MEDIA_DIR/" && rmdir "$dirname"
+        fi
+      fi
+
+      # remove noisy files:
+      find "$MEDIA_DIR/" -type f \(\
+           -iname 'www.YTS.*.jpg' \
+        -o -iname 'WWW.YIFY*.COM.jpg' \
+        -o -iname 'YIFY*.com.txt' \
+        -o -iname 'YTS*.com.txt' \
+        \) -exec rm {} \;
+
       # dedupe the whole media library.
       # yeah, a bit excessive: move this to a cron job if that's problematic.
       destructive hardlink /var/media --reflink=always --ignore-time --verbose
     '';
   };
 in
+lib.mkIf false  #< TODO: re-enable once confident of sandboxing
 {
   sane.persist.sys.byStore.plaintext = [
     # TODO: mode? we need this specifically for the stats tracking in .config/
@@ -81,8 +106,8 @@ in
     # DOCUMENTATION/options list: <https://github.com/transmission/transmission/blob/main/docs/Editing-Configuration-Files.md#options>
 
     # message-level = 3;  #< enable for debug logging. 0-3, default is 2.
-    # 0.0.0.0 => allow rpc from any host: we gate it via firewall and auth requirement
+    # 10.0.1.6 => allow rpc only from the root servo ns. it'll tunnel things to the net, if need be.
-    rpc-bind-address = "0.0.0.0";
+    rpc-bind-address = "10.0.1.6";
     #rpc-host-whitelist = "bt.uninsane.org";
     #rpc-whitelist = "*.*.*.*";
     rpc-authentication-required = true;
@@ -92,6 +117,10 @@ in
     rpc-password = "{503fc8928344f495efb8e1f955111ca5c862ce0656SzQnQ5";
     rpc-whitelist-enabled = false;
 
+    # force behind ovpns in case the NetworkNamespace fails somehow
+    bind-address-ipv4 = "185.157.162.178";
+    port-forwarding-enabled = false;
+
     # hopefully, make the downloads world-readable
     # umask = 0;  #< default is 2: i.e. deny writes from world
 
@@ -131,6 +160,8 @@ in
   systemd.services.transmission.serviceConfig = {
     # run this behind the OVPN static VPN
     NetworkNamespacePath = "/run/netns/ovpns";
+    ExecStartPre = [ "${lib.getExe pkgs.sane-scripts.ip-check} --no-upnp --expect 185.157.162.178" ];  # abort if public IP is not as expected
+
     Restart = "on-failure";
     RestartSec = "30s";
     BindPaths = [ "/var/media" ];  #< so it can move completed torrents into the media library

hosts/by-name/servo/services/trust-dns.nix

@@ -2,19 +2,11 @@
 { config, lib, pkgs, ... }:
 
 let
+  dyn-dns = config.sane.services.dyn-dns;
   nativeAddrs = lib.mapAttrs (_name: builtins.head) config.sane.dns.zones."uninsane.org".inet.A;
   bindOvpn = "10.0.1.5";
-in lib.mkMerge [
+in
 {
-  services.trust-dns.enable = true;
-
-  # don't bind to IPv6 until i explicitly test that stack
-  services.trust-dns.settings.listen_addrs_ipv6 = [];
-  services.trust-dns.quiet = true;
-  # FIXME(2023/11/26): services.trust-dns.debug doesn't log requests: use RUST_LOG=debug env for that.
-  # - see: <https://github.com/hickory-dns/hickory-dns/issues/2082>
-  # services.trust-dns.debug = true;
-
   sane.ports.ports."53" = {
     protocol = [ "udp" "tcp" ];
     visibleTo.lan = true;
@@ -66,23 +58,6 @@ in lib.mkMerge [
 
   services.trust-dns.settings.zones = [ "uninsane.org" ];
 
-  # TODO: can i transform this into some sort of service group?
-  # have `systemctl restart trust-dns.service` restart all the individual services?
-  systemd.services.trust-dns.serviceConfig = {
-    DynamicUser = lib.mkForce false;
-    User = "trust-dns";
-    Group = "trust-dns";
-    wantedBy = lib.mkForce [];
-  };
-  systemd.services.trust-dns.enable = false;
-
-  users.groups.trust-dns = {};
-  users.users.trust-dns = {
-    group = "trust-dns";
-    isSystemUser = true;
-  };
-
-  # sane.services.dyn-dns.restartOnChange = [ "trust-dns.service" ];
 
   networking.nat.enable = true;
   networking.nat.extraCommands = ''
@@ -107,97 +82,72 @@ in lib.mkMerge [
     visibleTo.lan = true;
     description = "colin-redirected-dns-for-lan-namespace";
   };
-}
-{
-  systemd.services =
-    let
-      sed = "${pkgs.gnused}/bin/sed";
-      stateDir = "/var/lib/trust-dns";
-      zoneTemplate = pkgs.writeText "uninsane.org.zone.in" config.sane.dns.zones."uninsane.org".rendered;
 
-      zoneDirFor = flavor: "${stateDir}/${flavor}";
-      zoneFor = flavor: "${zoneDirFor flavor}/uninsane.org.zone";
-      mkTrustDnsService = opts: flavor: let
-        flags = let baseCfg = config.services.trust-dns; in
-          (lib.optional baseCfg.debug "--debug") ++ (lib.optional baseCfg.quiet "--quiet");
-        flagsStr = builtins.concatStringsSep " " flags;
 
-        anative = nativeAddrs."servo.${flavor}";
+  sane.services.trust-dns.enable = true;
-
+  sane.services.trust-dns.instances = let
-        toml = pkgs.formats.toml { };
+    mkSubstitutions = flavor: {
-        configTemplate = opts.config or (toml.generate "trust-dns-${flavor}.toml" (
+      "%AWAN%" = "$(cat '${dyn-dns.ipPath}')";
-          (
+      "%CNAMENATIVE%" = "servo.${flavor}";
-            lib.filterAttrsRecursive (_: v: v != null) config.services.trust-dns.settings
+      "%ANATIVE%" = nativeAddrs."servo.${flavor}";
-          ) // {
+      "%AOVPNS%" = "185.157.162.178";
-            listen_addrs_ipv4 = opts.listen or [ anative ];
-          }
-        ));
-        configFile = "${stateDir}/${flavor}-config.toml";
-
-        port = opts.port or 53;
-      in {
-        description = "trust-dns Domain Name Server (serving ${flavor})";
-        unitConfig.Documentation = "https://trust-dns.org/";
-
-        preStart = ''
-          wan=$(cat '${config.sane.services.dyn-dns.ipPath}')
-          ${sed} s/%AWAN%/$wan/ ${configTemplate} > ${configFile}
-        '' + lib.optionalString (!opts ? config) ''
-          mkdir -p ${zoneDirFor flavor}
-          ${sed} \
-            -e s/%CNAMENATIVE%/servo.${flavor}/ \
-            -e s/%ANATIVE%/${anative}/ \
-            -e s/%AWAN%/$wan/ \
-            -e s/%AOVPNS%/185.157.162.178/ \
-            ${zoneTemplate} > ${zoneFor flavor}
-        '';
-        serviceConfig = config.systemd.services.trust-dns.serviceConfig // {
-          ExecStart = ''
-            ${pkgs.trust-dns}/bin/${pkgs.trust-dns.meta.mainProgram} \
-            --port ${builtins.toString port} \
-            --zonedir ${zoneDirFor flavor}/ \
-            --config ${configFile} ${flagsStr}
-          '';
     };
-
+  in
-        after = [ "network.target" ];
+  {
-        wantedBy = [ "multi-user.target" ];
+    wan = {
+      substitutions = mkSubstitutions "wan";
+      listenAddrsIpv4 = [
+        nativeAddrs."servo.lan"
+        bindOvpn
+      ];
     };
-    in {
+    lan = {
-      trust-dns-wan = mkTrustDnsService { listen = [ nativeAddrs."servo.lan" bindOvpn ]; } "wan";
+      substitutions = mkSubstitutions "lan";
-      trust-dns-lan = mkTrustDnsService { port = 1053; } "lan";
+      listenAddrsIpv4 = [ nativeAddrs."servo.lan" ];
-      trust-dns-hn = mkTrustDnsService { port = 1053; } "hn";
+      port = 1053;
-      trust-dns-hn-resolver = mkTrustDnsService {
+    };
-        config = pkgs.writeText "hn-resolver-config.toml" ''
+    hn = {
-          # i host a resolver in the wireguard VPN so that clients can resolve DNS through the VPN.
+      substitutions = mkSubstitutions "hn";
-          # (that's what this file achieves).
+      listenAddrsIpv4 = [ nativeAddrs."servo.hn" ];
-          #
+      port = 1053;
-          # one would expect this resolver could host the authoritative zone for `uninsane.org`, and then forward everything else to the system resolver...
+    };
-          # and while that works for `dig`, it breaks for `nslookup` (and so `ssh`, etc).
+    # hn-resolver = {
-          #
+    #   # don't need %AWAN% here because we forward to the hn instance.
-          # DNS responses include a flag for if the responding server is the authority of the zone queried.
+    #   listenAddrsIpv4 = [ nativeAddrs."servo.hn" ];
-          # it seems that default Linux stub resolvers either:
+    #   extraConfig = {
-          # - expect DNSSEC when the response includes that bit, or
+    #     zones = [
-          # - expect A records to be in the `answer` section instead of `additional` section.
+    #       {
-          # or perhaps something more nuanced. but for `nslookup` to be reliable, it has to talk to an
+    #         zone = "uninsane.org";
-          # instance of trust-dns which is strictly a resolver, with no authority.
+    #         zone_type = "Forward";
-          # hence, this config: a resolver which forwards to the actual authority.
+    #         stores = {
-
+    #           type = "forward";
-          listen_addrs_ipv4 = ["${nativeAddrs."servo.hn"}"]
+    #           name_servers = [
-          listen_addrs_ipv6 = []
+    #             {
-
+    #               socket_addr = "${nativeAddrs."servo.hn"}:1053";
-          [[zones]]
+    #               protocol = "udp";
-          zone = "uninsane.org"
+    #               trust_nx_responses = true;
-          zone_type = "Forward"
+    #             }
-          stores = { type = "forward", name_servers = [{ socket_addr = "${nativeAddrs."servo.hn"}:1053", protocol = "udp", trust_nx_responses = true }] }
+    #           ];
-
+    #         };
-          [[zones]]
+    #       }
-          # forward the root zone to the local DNS resolver
+    #       {
-          zone = "."
+    #         # forward the root zone to the local DNS resolver
-          zone_type = "Forward"
+    #         zone = ".";
-          stores = { type = "forward", name_servers = [{ socket_addr = "127.0.0.53:53", protocol = "udp", trust_nx_responses = true }] }
+    #         zone_type = "Forward";
-        '';
+    #         stores = {
-      } "hn-resolver";
+    #           type = "forward";
+    #           name_servers = [
+    #             {
+    #               socket_addr = "127.0.0.53:53";
+    #               protocol = "udp";
+    #               trust_nx_responses = true;
+    #             }
+    #           ];
+    #         };
+    #       }
+    #     ];
+    #   };
+    # };
   };
 
   sane.services.dyn-dns.restartOnChange = [
@@ -207,4 +157,3 @@ in lib.mkMerge [
     # "trust-dns-hn-resolver.service"  # doesn't need restart because it doesn't know about WAN IP
   ];
 }
-]

hosts/common/feeds.nix

@@ -81,11 +81,14 @@ let
     (fromDb "feeds.simplecast.com/xKJ93w_w" // uncat)  # Atlas Obscura
     (fromDb "feeds.transistor.fm/acquired" // tech)
     (fromDb "fulltimenix.com" // tech)
+    (fromDb "futureofcoding.org/episodes" // tech)
     (fromDb "hackerpublicradio.org" // tech)
     (fromDb "lexfridman.com/podcast" // rat)
     (fromDb "mapspodcast.libsyn.com" // uncat)  # Multidisciplinary Association for Psychedelic Studies
+    (fromDb "microarch.club" // tech)
     (fromDb "omegataupodcast.net" // tech)  # 3/4 German; 1/4 eps are English
     (fromDb "omny.fm/shows/cool-people-who-did-cool-stuff" // pol)  # Maggie Killjoy -- referenced by Cory Doctorow
+    (fromDb "omny.fm/shows/money-stuff-the-podcast")  # Matt Levine
     (fromDb "omny.fm/shows/the-dollop-with-dave-anthony-and-gareth-reynolds")  # The Dollop history/comedy
     (fromDb "originstories.libsyn.com" // uncat)
     (fromDb "podcast.posttv.com/itunes/post-reports.xml" // pol)
@@ -101,6 +104,8 @@ let
     (fromDb "sharkbytes.transistor.fm" // tech)  # Wireshark Podcast o_0
     (fromDb "sscpodcast.libsyn.com" // rat)  # Astral Codex Ten
     (fromDb "talesfromthebridge.buzzsprout.com" // tech)  # Sci-Fi? has Peter Watts; author of No Moods, Ads or Cutesy Fucking Icons (rifters.com)
+    (fromDb "theamphour.com" // tech)
+    (fromDb "techtalesshow.com" // tech)  # Corbin Davenport
     (fromDb "techwontsave.us" // pol)  # rec by Cory Doctorow
     (fromDb "wakingup.libsyn.com" // pol)  # Sam Harris
     (fromDb "werenotwrong.fireside.fm" // pol)
@@ -124,11 +129,11 @@ let
     (fromDb "acoup.blog/feed")  # history, states. author: <https://historians.social/@bretdevereaux/following>
     (fromDb "amosbbatto.wordpress.com" // tech)
     (fromDb "anish.lakhwara.com" // tech)
+    (fromDb "apenwarr.ca/log/rss.php" // tech)  # CEO of tailscale
     (fromDb "applieddivinitystudies.com" // rat)
     (fromDb "artemis.sh" // tech)
     (fromDb "ascii.textfiles.com" // tech)  # Jason Scott
     (fromDb "austinvernon.site" // tech)
-    # (fromDb "balajis.com" // pol)  # Balaji
     (fromDb "ben-evans.com/benedictevans" // pol)
     (fromDb "bitbashing.io" // tech)
     (fromDb "bitsaboutmoney.com" // uncat)
@@ -139,8 +144,6 @@ let
     (fromDb "blog.thalheim.io" // tech)  # Mic92
     (fromDb "bunniestudios.com" // tech)  # Bunnie Juang
     (fromDb "capitolhillseattle.com" // pol)
-    # (fromDb "drewdevault.com" // tech)
-    # (fromDb "econlib.org" // pol)
     (fromDb "edwardsnowden.substack.com" // pol // text)
     (fromDb "fasterthanli.me" // tech)
     (fromDb "gwern.net" // rat)
@@ -151,9 +154,9 @@ let
     (fromDb "interconnected.org/home/feed" // rat)  # Matt Webb -- engineering-ish, but dreamy
     (fromDb "jeffgeerling.com" // tech)
     (fromDb "jefftk.com" // tech)
+    (fromDb "jwz.org/blog" // tech // pol)  # DNA lounge guy, loooong-time blogger
     (fromDb "kill-the-newsletter.com/feeds/joh91bv7am2pnznv.xml" // pol)  # Matt Levine - Money Stuff
     (fromDb "kosmosghost.github.io/index.xml" // tech)
-    # (fromDb "lesswrong.com" // rat)
     (fromDb "linmob.net" // tech)
     (fromDb "lwn.net" // tech)
     (fromDb "lynalden.com" // pol)
@@ -168,13 +171,13 @@ let
     (fromDb "pomeroyb.com" // tech)
     (fromDb "postmarketos.org/blog" // tech)
     (fromDb "preposterousuniverse.com" // rat)  # Sean Carroll
-    (fromDb "profectusmag.com" // uncat)
     (fromDb "project-insanity.org" // tech)  # shared blog by a few NixOS devs, notably onny
     (fromDb "putanumonit.com" // rat)  # mostly dating topics. not advice, or humor, but looking through a social lens
     (fromDb "richardcarrier.info" // rat)
     (fromDb "rifters.com/crawl" // uncat)  # No Moods, Ads or Cutesy Fucking Icons
     (fromDb "righto.com" // tech)  # Ken Shirriff
     (fromDb "rootsofprogress.org" // rat)  # Jason Crawford
+    (fromDb "samuel.dionne-riel.com" // tech)  # SamuelDR
     (fromDb "sagacioussuricata.com" // tech)  # ian (Sanctuary)
     (fromDb "semiaccurate.com" // tech)
     (fromDb "sideways-view.com" // rat)  # Paul Christiano
@@ -183,33 +186,41 @@ let
     (fromDb "spectrum.ieee.org" // tech)
     (fromDb "stpeter.im/atom.xml" // pol)
     (fromDb "thediff.co" // pol)  # Byrne Hobart
-    # (fromDb "theregister.com" // tech)
     (fromDb "thisweek.gnome.org" // tech)
     (fromDb "tuxphones.com" // tech)
     (fromDb "uninsane.org" // tech)
     (fromDb "unintendedconsequenc.es" // rat)
-    # (fromDb "vitalik.ca" // tech)  # moved to vitalik.eth.limo
     (fromDb "vitalik.eth.limo" // tech)  # Vitalik Buterin
-    # (fromDb "webcurious.co.uk" // uncat)  # link aggregator; defunct?
+    (fromDb "weekinethereumnews.com" // tech)
     (fromDb "willow.phantoma.online")  # wizard@xyzzy.link
     (fromDb "xn--gckvb8fzb.com" // tech)
     (mkSubstack "astralcodexten" // rat // daily)  # Scott Alexander
-    # (mkSubstack "doomberg" // tech // weekly)  # articles are all pay-walled
     (mkSubstack "eliqian" // rat // weekly)
     (mkSubstack "oversharing" // pol // daily)
     (mkSubstack "samkriss" // humor // infrequent)
     (mkText "http://benjaminrosshoffman.com/feed" // pol // weekly)
     (mkText "http://boginjr.com/feed" // tech // infrequent)
     (mkText "https://forum.merveilles.town/rss.xml" // pol // infrequent)  #quality RSS list here: <https://forum.merveilles.town/thread/57/share-your-rss-feeds%21-6/>
-    # (mkText "https://github.com/Kaiteki-Fedi/Kaiteki/commits/master.atom" // tech // infrequent)
     (mkText "https://jvns.ca/atom.xml" // tech // weekly)  # Julia Evans
     (mkText "https://linuxphoneapps.org/blog/atom.xml" // tech // infrequent)
     (mkText "https://nixos.org/blog/announcements-rss.xml" // tech // infrequent)  # more nixos stuff here, but unclear how to subscribe: <https://nixos.org/blog/categories.html>
     (mkText "https://nixos.org/blog/stories-rss.xml" // tech // weekly)
     (mkText "https://solar.lowtechmagazine.com/posts/index.xml" // tech // weekly)
+    (mkText "https://www.stratechery.com/rss" // pol // weekly)  # Ben Thompson
+
+    # (fromDb "balajis.com" // pol)  # Balaji
+    # (fromDb "drewdevault.com" // tech)
+    # (fromDb "econlib.org" // pol)
+    # (fromDb "lesswrong.com" // rat)
+    # (fromDb "profectusmag.com" // pol)  # some conservative/libertarian think tank
+    # (fromDb "thesideview.co" // uncat)  # spiritual journal; RSS items are stubs
+    # (fromDb "theregister.com" // tech)
+    # (fromDb "vitalik.ca" // tech)  # moved to vitalik.eth.limo
+    # (fromDb "webcurious.co.uk" // uncat)  # link aggregator; defunct?
+    # (mkSubstack "doomberg" // tech // weekly)  # articles are all pay-walled
+    # (mkText "https://github.com/Kaiteki-Fedi/Kaiteki/commits/master.atom" // tech // infrequent)
     # (mkText "https://til.simonwillison.net/tils/feed.atom" // tech // weekly)
     # (mkText "https://www.bloomberg.com/opinion/authors/ARbTQlRLRjE/matthew-s-levine.rss" // pol // weekly)  # Matt Levine (preview/paywalled)
-    (mkText "https://www.stratechery.com/rss" // pol // weekly)  # Ben Thompson
   ];
 
   videos = [
@@ -221,18 +232,20 @@ let
     (fromDb "youtube.com/@JackStauber")
     (fromDb "youtube.com/@NativLang")
     (fromDb "youtube.com/@PolyMatter")
-    # (fromDb "youtube.com/@rossmanngroup" // pol // tech)  # Louis Rossmann
     (fromDb "youtube.com/@TechnologyConnections" // tech)
     (fromDb "youtube.com/@TheB1M")
     (fromDb "youtube.com/@TomScottGo")
     (fromDb "youtube.com/@Vihart")
     (fromDb "youtube.com/@Vox")
     (fromDb "youtube.com/@Vsauce")
+
+    # (fromDb "youtube.com/@rossmanngroup" // pol // tech)  # Louis Rossmann
   ];
 
   images = [
     (fromDb "catandgirl.com" // img // humor)
     (fromDb "davidrevoy.com" // img // art)
+    (fromDb "grumpy.website" // img // humor)
     (fromDb "miniature-calendar.com" // img // art // daily)
     (fromDb "pbfcomics.com" // img // humor)
     (fromDb "poorlydrawnlines.com/feed" // img // humor)

hosts/common/fs.nix

@@ -107,7 +107,8 @@ let
     ftp = common ++ fuseColin ++ [
       # "ftpfs_debug=2"
       "user=colin:ipauth"
-      "connect_timeout=10"
+      # connect_timeout=10: casting shows to T.V. fails partway through about half the time
+      "connect_timeout=20"
     ];
   };
   remoteHome = host: {
@@ -225,10 +226,10 @@ lib.mkMerge [
   (remoteServo "media/Books")
   (remoteServo "media/collections")
   # (remoteServo "media/datasets")
-  (remoteServo "media/freeleech")
   (remoteServo "media/games")
   (remoteServo "media/Music")
   (remoteServo "media/Pictures/macros")
+  (remoteServo "media/torrents")
   (remoteServo "media/Videos")
   (remoteServo "playground")
 ]

hosts/common/hardware/default.nix

@@ -80,14 +80,12 @@
   # - query details with `sudo cpupower frequency-info`
   powerManagement.cpuFreqGovernor = "ondemand";
 
-  services.logind.extraConfig = ''
   # see: `man logind.conf`
   # don’t shutdown when power button is short-pressed (commonly done an accident, or by cats).
   #   but do on long-press: useful to gracefully power-off server.
-    HandlePowerKey=lock
+  services.logind.powerKey = "lock";
-    HandlePowerKeyLongPress=poweroff
+  services.logind.powerKeyLongPress = "poweroff";
-    HandleLidSwitch=lock
+  services.logind.lidSwitch = "lock";
-  '';
 
   # services.snapper.configs = {
   #   root = {

hosts/common/hardware/x86_64.nix

@@ -7,6 +7,17 @@
       "usb_storage"   # rpi needed this to boot from usb storage, i think.
       "nvme"  # to boot from nvme devices
       # efi_pstore evivars
+
+      # added (speculatively) 2024/05/21; these were implicitly being added by nixos/modules/system/boot/kernel.nix
+      # i've copied not all of them, but most
+      "mmc_block"
+      "dm_mod"
+      # USB keyboards
+      "uhci_hcd" "ehci_hcd" "ehci_pci" "ohci_hcd" "ohci_pci" "xhci_hcd" "xhci_pci" "usbhid" "hid_generic" "hid_lenovo" "hid_apple" "hid_roccat" "hid_logitech_hidpp" "hid_logitech_dj" "hid_microsoft" "hid_cherry" "hid_corsair"
+      # x86 keyboard stuff
+      "pcips2" "atkbd" "i8042"
+      # stage-2 init needs rtc?
+      "rtc_cmos"
     ];
 
     hardware.cpu.amd.updateMicrocode = true;    # desktop

hosts/common/home/mime.nix

@@ -50,7 +50,7 @@ let
   localShareApplicationsPkg = (pkgs.symlinkJoin {
     name = "user-local-share-applications";
     paths = builtins.map
-      (p: "${p.package}")
+      (p: builtins.toString p.package)
       (enabledProgramsWithPackage ++ [ { package=mimeappsListPkg; } ]);
   }).overrideAttrs (orig: {
     # like normal symlinkJoin, but don't error if the path doesn't exist

hosts/common/home/xdg-dirs.nix

@@ -3,11 +3,15 @@
 {
   # XDG defines things like ~/Desktop, ~/Downloads, etc.
   # these clutter the home, so i mostly don't use them.
+  # note that several of these are not actually standardized anywhere.
+  # some are even non-conventional, like:
+  # - XDG_PHOTOS_DIR: only works because i patch e.g. megapixels
   sane.user.fs.".config/user-dirs.dirs".symlink.text = ''
     XDG_DESKTOP_DIR="$HOME/.xdg/Desktop"
     XDG_DOCUMENTS_DIR="$HOME/dev"
     XDG_DOWNLOAD_DIR="$HOME/tmp"
     XDG_MUSIC_DIR="$HOME/Music"
+    XDG_PHOTOS_DIR="$HOME/Pictures/Photos"
     XDG_PICTURES_DIR="$HOME/Pictures"
     XDG_PUBLICSHARE_DIR="$HOME/.xdg/Public"
     XDG_SCREENSHOTS_DIR="$HOME/Pictures/Screenshots"

hosts/common/net/default.nix

@@ -60,8 +60,5 @@
   networking.networkmanager.plugins = lib.mkForce [];
 
   # keyfile.path = where networkmanager should look for connection credentials
-  networking.networkmanager.extraConfig = ''
+  networking.networkmanager.settings.keyfile.path = "/var/lib/NetworkManager/system-connections";
-    [keyfile]
-    path=/var/lib/NetworkManager/system-connections
-  '';
 }

hosts/common/net/dns.nix

@@ -1,7 +1,6 @@
 # things to consider when changing these parameters:
 # - temporary VPN access (`sane-vpn up ...`)
 # - servo `ovpns` namespace (it *relies* on /etc/resolv.conf mentioning 127.0.0.53)
-# - jails: `firejail --net=br-ovpnd-us --noprofile --dns=46.227.67.134 ping 1.1.1.1`
 #
 # components:
 # - /etc/nsswitch.conf:
@@ -18,17 +17,22 @@
 #   - modern implementations hardcodes `127.0.0.53` and then systemd-resolved proxies everything (and caches).
 #
 # namespacing:
-# - each namespace can use a different /etc/resolv.conf to specify different DNS servers (see `firejail --dns=...`)
+# - each namespace may use a different /etc/resolv.conf to specify different DNS servers
-# - nscd breaks namespacing: the host nscd is unaware of the guest's /etc/resolv.conf, and so direct's the guest's DNS requests to the host's servers.
+# - nscd breaks namespacing: the host nscd is unaware of the guest's /etc/resolv.conf, and so directs the guest's DNS requests to the host's servers.
-#   - this is fixed by either `firejail --blacklist=/var/run/nscd/socket`, or disabling nscd altogether.
+#   - this is fixed by either removing `/var/run/nscd/socket` from the namespace, or disabling nscd altogether.
-{ lib, ... }:
+{ config, lib, ... }:
+lib.mkMerge [
 {
+  sane.services.trust-dns.enable = lib.mkDefault config.sane.services.trust-dns.asSystemResolver;
+  sane.services.trust-dns.asSystemResolver = lib.mkDefault true;
+}
+(lib.mkIf (!config.sane.services.trust-dns.asSystemResolver) {
   # use systemd's stub resolver.
   # /etc/resolv.conf isn't sophisticated enough to use different servers per net namespace (or link).
   # instead, running the stub resolver on a known address in the root ns lets us rewrite packets
   # in servo's ovnps namespace to use the provider's DNS resolvers.
   # a weakness is we can only query 1 NS at a time (unless we were to clone the packets?)
-  # TODO: rework servo's netns to use `firejail`, which is capable of spoofing /etc/resolv.conf.
+  # TODO: improve trust-dns recursive resolver and then remove this
   services.resolved.enable = true;  #< to disable, set ` = lib.mkForce false`, as other systemd features default to enabling `resolved`.
   # without DNSSEC:
   # - dig matrix.org => works
@@ -44,7 +48,8 @@
     # stub resolver (just forwards upstream) lives on 127.0.0.54
     "127.0.0.53"
   ];
-
+})
+{
   # nscd -- the Name Service Caching Daemon -- caches DNS query responses
   # in a way that's unaware of my VPN routing, so routes are frequently poor against
   # services which advertise different IPs based on geolocation.
@@ -65,3 +70,4 @@
   services.nscd.enable = false;
   system.nssModules = lib.mkForce [];
 }
+]

hosts/common/nix/default.nix

@@ -53,7 +53,7 @@
 
   # allow `nix-shell` (and probably nix-index?) to locate our patched and custom packages.
   # this is actually a no-op, and the real action happens in assigning `nix.settings.nix-path`.
-  nix.nixPath = (lib.optionals config.sane.enableSlowPrograms [
+  nix.nixPath = (lib.optionals (config.sane.maxBuildCost >= 2) [
     "nixpkgs=${pkgs.path}"
   ]) ++ [
     # note the import starts at repo root: this allows `./overlay/default.nix` to access the stuff at the root
@@ -65,10 +65,10 @@
 
   # ensure new deployments have a source of this repo with which they can bootstrap.
   # this however changes on every commit and can be slow to copy for e.g. `moby`.
-  environment.etc."nixos" = lib.mkIf config.sane.enableSlowPrograms {
+  environment.etc."nixos" = lib.mkIf (config.sane.maxBuildCost >= 3) {
     source = ../../..;
   };
-  environment.etc."nix/registry.json" = lib.mkIf (!config.sane.enableSlowPrograms) {
+  environment.etc."nix/registry.json" = lib.mkIf (config.sane.maxBuildCost < 3) {
     enable = false;
   };
 

hosts/common/polyunfill.nix

@@ -2,6 +2,31 @@
 
 { lib, ... }:
 {
+  # remove a few items from /run/wrappers we don't need.
+  options.security.wrappers = lib.mkOption {
+    apply = lib.filterAttrs (name: _: !(builtins.elem name [
+      # wrappers from <repo:nixos/nixpkgs:nixos/modules/programs/shadow.nix>
+      "newgidmap"
+      "newgrp"
+      "newuidmap"
+      # "sg"
+      # "su"
+      # wrappers from <repo:nixos/nixpkgs:nixos/modules/security/pam.nix>
+      # may need to patch e.g. `pam` package (pam_unix) to not refer to unix_chkpwd by path
+      "unix_chkpwd"
+    ]));
+  };
+
+  config = {
+    nixpkgs.overlays = [(self: super: {
+      pam = super.pam.overrideAttrs (upstream: {
+        postPatch = (if upstream.postPatch != null then upstream.postPatch else "") + ''
+          substituteInPlace modules/pam_unix/Makefile.am --replace-fail \
+            "/run/wrappers/bin/unix_chkpwd" "$out"
+        '';
+      });
+    })];
+
     # disable non-required packages like nano, perl, rsync, strace
     environment.defaultPackages = [];
 
@@ -69,4 +94,21 @@
     # nixos propagates those in: <nixos/modules/system/boot/systemd/tmpfiles.nix>
     # by overwriting this with an empty file, we can effectively remove it.
     environment.etc."tmpfiles.d/x11.conf".text = "# (removed by Colin)";
+
+    # see: <nixos/modules/tasks/swraid.nix>
+    # it was enabled by default before 23.11
+    boot.swraid.enable = lib.mkDefault false;
+
+    # see: <nixos/modules/system/boot/kernel.nix>
+    # by default, it adds to boot.initrd.availableKernelModules:
+    # - SATA: "ahci" "sata_nv" "sata_via" "sata_sis" "sata_uli" "ata_piix" "pata_marvell"
+    # - "nvme"
+    # - scsi: "sd_mod" "sr_mod"
+    # - SD/eMMC: "mmc_block"
+    # - USB keyboards: "uhci_hcd" "ehci_hcd" "ehci_pci" "ohci_hcd" "ohci_pci" "xhci_hcd" "xhci_pci" "usbhid" "hid_generic" "hid_lenovo" "hid_apple" "hid_roccat" "hid_logitech_hidpp" "hid_logitech_dj" "hid_microsoft" "hid_cherry" "hid_corsair"
+    # - LVM: "dm_mod"
+    # - on x86 only: more keyboard stuff: "pcips2" "atkbd" "i8042"
+
+    boot.initrd.includeDefaultModules = lib.mkDefault false;
+  };
 }

hosts/common/programs/animatch.nix

@@ -30,6 +30,8 @@
       });
     };
 
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.whitelistWayland = true;
 

hosts/common/programs/assorted.nix

@@ -63,8 +63,11 @@ in
       "jq"
       "killall"
       "less"
+      "lftp"
       # "libcap_ng"  # for `netcap`
       "lsof"
+      "man-pages"
+      "man-pages-posix"
       # "miniupnpc"
       "nano"
       #  "ncdu"  # ncurses disk usage. doesn't cross compile (zig)
@@ -89,6 +92,7 @@ in
       "tree"
       "usbutils"  # lsusb
       "util-linux"  # lsblk, lscpu, etc
+      "valgrind"
       "wget"
       "wirelesstools"  # iwlist
       # "xq"  # jq for XML
@@ -108,7 +112,6 @@ in
     #   - debugging?
     consoleUtils = declPackageSet [
       "alsaUtils"  # for aplay, speaker-test
-      "strings"
       # "cdrtools"
       # "clinfo"
       # "dmidecode"
@@ -137,6 +140,7 @@ in
       "nmon"
       # "node2nix"
       # "oathToolkit"  # for oathtool
+      "objdump"
       # "ponymix"
       "pulsemixer"
       "python3-repl"
@@ -149,6 +153,7 @@ in
       "sops"  # for manually viewing secrets; outside `sane-secrets` (TODO: improve sane-secrets!)
       "speedtest-cli"
       # "ssh-to-age"
+      "strings"
       "sudo"
       # "tageditor"  # music tagging
       # "unar"
@@ -160,6 +165,7 @@ in
     ];
 
     pcConsoleUtils = declPackageSet [
+      "errno"  # 2024/05/18: doesn't cross compile (perl File-ShareDir / Module-Build-Tiny)
       # "gh"  # MS GitHub cli
       "nix-index"
       "nixpkgs-review"
@@ -173,6 +179,7 @@ in
       "ffmpeg"
       "go2tv"  # cast videos to UPNP/DLNA device (i.e. tv).
       "imagemagick"
+      "sane-cast"  # cast videos to UPNP/DLNA, with compatibility
       "sox"
       "yt-dlp"
     ];
@@ -211,6 +218,7 @@ in
 
     backblaze-b2 = {};
 
+    blanket.buildCost = 1;
     blanket.sandbox.method = "bwrap";
     blanket.sandbox.whitelistAudio = true;
     # blanket.sandbox.whitelistDbus = [ "user" ];  # TODO: untested
@@ -263,13 +271,14 @@ in
     ddrescue.sandbox.method = "landlock";  # TODO:sandbox: untested
     ddrescue.sandbox.autodetectCliPaths = "existingOrParent";
 
-    # auth token, preferences
+    delfin.buildCost = 1;
     delfin.sandbox.method = "bwrap";
     delfin.sandbox.whitelistAudio = true;
     delfin.sandbox.whitelistDbus = [ "user" ];  # else `mpris` plugin crashes the player
     delfin.sandbox.whitelistDri = true;
     delfin.sandbox.whitelistWayland = true;
     delfin.sandbox.net = "clearnet";
+    # auth token, preferences
     delfin.persist.byStore.private = [ ".config/delfin" ];
 
     dig.sandbox.method = "bwrap";
@@ -298,10 +307,6 @@ in
     dtc.sandbox.method = "bwrap";
     dtc.sandbox.autodetectCliPaths = true;  # TODO:sandbox: untested
 
-    dtrx.sandbox.method = "bwrap";
-    dtrx.sandbox.whitelistPwd = true;
-    dtrx.sandbox.autodetectCliPaths = "existing";  #< for the archive
-
     duplicity = {};
 
     e2fsprogs.sandbox.method = "landlock";
@@ -314,11 +319,13 @@ in
 
     eg25-control = {};
 
+    electrum.buildCost = 1;
     electrum.sandbox.method = "bwrap";  # TODO:sandbox: untested
     electrum.sandbox.net = "all";  # TODO: probably want to make this run behind a VPN, always
     electrum.sandbox.whitelistWayland = true;
     electrum.persist.byStore.cryptClearOnBoot = [ ".electrum" ];  #< TODO: use XDG dirs!
 
+    endless-sky.buildCost = 1;
     endless-sky.persist.byStore.plaintext = [ ".local/share/endless-sky" ];
     endless-sky.sandbox.method = "bwrap";
     endless-sky.sandbox.whitelistAudio = true;
@@ -357,6 +364,7 @@ in
       ".persist/plaintext"
     ];
 
+    ffmpeg.buildCost = 1;
     ffmpeg.sandbox.method = "bwrap";
     ffmpeg.sandbox.autodetectCliPaths = "existingFileOrParent";  # it outputs uncreated files -> parent dir needs mounting
 
@@ -374,7 +382,9 @@ in
 
     fluffychat-moby.persist.byStore.plaintext = [ ".local/share/chat.fluffy.fluffychat" ];
 
+    font-manager.buildCost = 1;
     font-manager.sandbox.method = "bwrap";
+    font-manager.sandbox.whitelistWayland = true;
     font-manager.packageUnwrapped = pkgs.rmDbusServicesInPlace (pkgs.font-manager.override {
       # build without the "Google Fonts" integration feature, to save closure / avoid webkitgtk_4_0
       withWebkit = false;
@@ -382,7 +392,7 @@ in
 
     forkstat.sandbox.method = "landlock";  #< doesn't seem to support bwrap
     forkstat.sandbox.extraConfig = [
-      "--sane-sandbox-keep-namespace" "pid"
+      "--sanebox-keep-namespace" "pid"
     ];
     forkstat.sandbox.extraPaths = [
       "/proc"
@@ -409,6 +419,7 @@ in
     # TODO: we can populate gh's stuff statically; it even lets us use the same oauth across machines
     gh.persist.byStore.private = [ ".config/gh" ];
 
+    gimp.buildCost = 1;
     gimp.sandbox.method = "bwrap";
     gimp.sandbox.whitelistX = true;
     gimp.sandbox.whitelistWayland = true;
@@ -428,32 +439,39 @@ in
       "/tmp"  # "Cannot open display:" if it can't mount /tmp 👀
     ];
 
+    "gnome.gnome-calculator".buildCost = 1;
     "gnome.gnome-calculator".sandbox.method = "bwrap";
     "gnome.gnome-calculator".sandbox.whitelistWayland = true;
 
+    "gnome.gnome-calendar".buildCost = 1;
     # gnome-calendar surely has data to persist, but i use it strictly to do date math, not track events.
     "gnome.gnome-calendar".sandbox.method = "bwrap";
     "gnome.gnome-calendar".sandbox.whitelistWayland = true;
 
-    "gnome.gnome-clocks".sandbox.method = "bwrap";
-    "gnome.gnome-clocks".sandbox.whitelistWayland = true;
-    "gnome.gnome-clocks".suggestedPrograms = [ "dconf" ];
-
     # gnome-disks
+    "gnome.gnome-disk-utility".buildCost = 1;
     "gnome.gnome-disk-utility".sandbox.method = "bwrap";
     "gnome.gnome-disk-utility".sandbox.whitelistDbus = [ "system" ];
     "gnome.gnome-disk-utility".sandbox.whitelistWayland = true;
+    "gnome.gnome-disk-utility".sandbox.extraHomePaths = [
+      "tmp"
+      "use/iso"
+      # TODO: probably need /dev and such
+    ];
 
     # seahorse: dump gnome-keyring secrets.
+    "gnome.seahorse".buildCost = 1;
     # N.B.: it can also manage ~/.ssh keys, but i explicitly don't add those to the sandbox for now.
     "gnome.seahorse".sandbox.method = "bwrap";
     "gnome.seahorse".sandbox.whitelistDbus = [ "user" ];
     "gnome.seahorse".sandbox.whitelistWayland = true;
 
+    gnome-2048.buildCost = 1;
     gnome-2048.sandbox.method = "bwrap";
     gnome-2048.sandbox.whitelistWayland = true;
     gnome-2048.persist.byStore.plaintext = [ ".local/share/gnome-2048/scores" ];
 
+    gnome-frog.buildCost = 1;
     gnome-frog.sandbox.method = "bwrap";
     gnome-frog.sandbox.whitelistWayland = true;
     gnome-frog.sandbox.whitelistDbus = [ "user" ];
@@ -480,6 +498,7 @@ in
     # 1. no number may appear unshaded more than once in the same row/column
     # 2. no two shaded tiles can be direct N/S/E/W neighbors
     # - win once (1) and (2) are satisfied
+    "gnome.hitori".buildCost = 1;
     "gnome.hitori".sandbox.method = "bwrap";
     "gnome.hitori".sandbox.whitelistWayland = true;
 
@@ -509,6 +528,7 @@ in
     grim.sandbox.autodetectCliPaths = "existingOrParent";
     grim.sandbox.whitelistWayland = true;
 
+    hase.buildCost = 1;
     hase.sandbox.method = "bwrap";
     hase.sandbox.net = "clearnet";
     hase.sandbox.whitelistAudio = true;
@@ -529,6 +549,7 @@ in
     # N.B.: inetutils' `ping` is shadowed by iputils' ping (by nixos, intentionally).
     inetutils.sandbox.method = "landlock";  # want to keep the same netns, at least.
 
+    inkscape.buildCost = 1;
     inkscape.sandbox.method = "bwrap";
     inkscape.sandbox.whitelistWayland = true;
     inkscape.sandbox.extraHomePaths = [
@@ -550,14 +571,17 @@ in
     ];
     iotop.sandbox.capabilities = [ "net_admin" ];
 
-    # provides `ip`, `routel`, others
+    # provides `ip`, `routel`, `bridge`, others.
-    iproute2.sandbox.method = "landlock";
+    # landlock works fine for most of these, but `ip netns exec` wants to attach to an existing namespace
-    iproute2.sandbox.net = "all";
+    # and that means we can't use ANY sandboxer for it.
-    iproute2.sandbox.capabilities = [ "net_admin" ];
+    iproute2.sandbox.enable = false;
-    iproute2.sandbox.extraPaths = [
+    # iproute2.sandbox.net = "all";
-      "/run/netns"  # for `ip netns ...` to work
+    # iproute2.sandbox.capabilities = [ "net_admin" ];
-      "/var/run/netns"
+    # iproute2.sandbox.extraPaths = [
-    ];
+    #   "/run/netns"  # for `ip netns ...` to work, but maybe not needed anymore?
+    #   "/sys/class/net"  # for `ip netns ...` to work
+    #   "/var/run/netns"
+    # ];
 
     iptables.sandbox.method = "landlock";
     iptables.sandbox.net = "all";
@@ -580,6 +604,7 @@ in
       "/proc"
     ];
 
+    krita.buildCost = 1;
     krita.sandbox.method = "bwrap";
     krita.sandbox.whitelistWayland = true;
     krita.sandbox.autodetectCliPaths = "existing";
@@ -595,11 +620,15 @@ in
       "tmp"
     ];
 
+    libcamera = {};
+
+    libcap.sandbox.enable = false;  #< for `capsh`, which i use as a sandboxer
     libcap_ng.sandbox.enable = false;  # there's something about /proc/$pid/fd which breaks `readlink`/stat with every sandbox technique (except capsh-only)
 
     libnotify.sandbox.method = "bwrap";
     libnotify.sandbox.whitelistDbus = [ "user" ];  # notify-send
 
+    losslesscut-bin.buildCost = 1;
     losslesscut-bin.sandbox.method = "bwrap";
     losslesscut-bin.sandbox.extraHomePaths = [
       "Music"
@@ -615,14 +644,19 @@ in
     losslesscut-bin.sandbox.whitelistX = true;
 
     lsof.sandbox.method = "capshonly";  # lsof doesn't sandbox under bwrap or even landlock w/ full access to /
+    lsof.sandbox.capabilities = [ "dac_override" "sys_ptrace" ];
 
     lua = {};
 
+    man-pages.sandbox.enable = false;
+    man-pages-posix.sandbox.enable = false;
+
     mercurial.sandbox.method = "bwrap";  # TODO:sandbox: untested
     mercurial.sandbox.net = "clearnet";
     mercurial.sandbox.whitelistPwd = true;
 
     # actual monero blockchain (not wallet/etc; safe to delete, just slow to regenerate)
+    monero-gui.buildCost = 1;
     # XXX: is it really safe to persist this? it doesn't have info that could de-anonymize if captured?
     monero-gui.persist.byStore.plaintext = [ ".bitmonero" ];
     monero-gui.sandbox.method = "bwrap";
@@ -631,6 +665,7 @@ in
       "records/finance/cryptocurrencies/monero"
     ];
 
+    mumble.buildCost = 1;
     mumble.persist.byStore.private = [ ".local/share/Mumble" ];
 
     nano.sandbox.method = "bwrap";
@@ -689,6 +724,8 @@ in
     # settings (electron app)
     obsidian.persist.byStore.plaintext = [ ".config/obsidian" ];
 
+    passt.sandbox.enable = false;  #< sandbox helper (netns specifically)
+
     parted.sandbox.method = "landlock";
     parted.sandbox.extraPaths = [
       "/dev"
@@ -721,7 +758,7 @@ in
     # procps: free, pgrep, pidof, pkill, ps, pwait, top, uptime, couple others
     procps.sandbox.method = "bwrap";
     procps.sandbox.extraConfig = [
-      "--sane-sandbox-keep-namespace" "pid"
+      "--sanebox-keep-namespace" "pid"
     ];
 
     pstree.sandbox.method = "landlock";
@@ -734,11 +771,14 @@ in
     pulsemixer.sandbox.method = "landlock";
     pulsemixer.sandbox.whitelistAudio = true;
 
+    pwvucontrol.buildCost = 1;
     pwvucontrol.sandbox.method = "bwrap";
     pwvucontrol.sandbox.whitelistAudio = true;
+    pwvucontrol.sandbox.whitelistDri = true;  # else perf on moby is unusable
     pwvucontrol.sandbox.whitelistWayland = true;
 
     python3-repl.packageUnwrapped = pkgs.python3.withPackages (ps: with ps; [
+      psutil
       requests
     ]);
     python3-repl.sandbox.method = "bwrap";
@@ -749,7 +789,7 @@ in
     ];
 
     qemu.sandbox.enable = false;  #< it's a launcher
-    qemu.slowToBuild = true;
+    qemu.buildCost = 2;
 
     rsync.sandbox.method = "bwrap";
     rsync.sandbox.net = "clearnet";
@@ -757,10 +797,9 @@ in
 
     rustc = {};
 
-    sane-open-desktop.sandbox.enable = false;  #< trivial script, and all our deps are sandboxed
+    sane-cast = {};  #< TODO: sandbox this the same way i sandbox go2tv
-    sane-open-desktop.suggestedPrograms = [
+
-      "gdbus"
+    sane-die-with-parent.sandbox.enable = false;  #< it's a launcher; can't sandbox
-    ];
 
     screen.sandbox.enable = false;  #< tty; needs to run anything
 
@@ -768,6 +807,7 @@ in
     sequoia.sandbox.whitelistPwd = true;
     sequoia.sandbox.autodetectCliPaths = true;
 
+    shattered-pixel-dungeon.buildCost = 1;
     shattered-pixel-dungeon.persist.byStore.plaintext = [ ".local/share/.shatteredpixel/shattered-pixel-dungeon" ];
     shattered-pixel-dungeon.sandbox.method = "bwrap";
     shattered-pixel-dungeon.sandbox.whitelistAudio = true;
@@ -775,6 +815,7 @@ in
     shattered-pixel-dungeon.sandbox.whitelistWayland = true;
 
     # printer/filament settings
+    slic3r.buildCost = 1;
     slic3r.persist.byStore.plaintext = [ ".Slic3r" ];
 
     slurp.sandbox.method = "bwrap";
@@ -786,15 +827,18 @@ in
     smartmontools.sandbox.autodetectCliPaths = "existing";
     smartmontools.sandbox.capabilities = [ "sys_rawio" ];
 
+    snapshot = {};
+
     sops.sandbox.method = "bwrap";  # TODO:sandbox: untested
     sops.sandbox.extraHomePaths = [
       ".config/sops"
-      "dev/nixos"
+      "nixos"
       # TODO: sops should only need access to knowledge/secrets,
       # except that i currently put its .sops.yaml config in the root of ~/knowledge
       "knowledge"
     ];
 
+    soundconverter.buildCost = 1;
     soundconverter.sandbox.method = "bwrap";
     soundconverter.sandbox.whitelistWayland = true;
     soundconverter.sandbox.extraHomePaths = [
@@ -812,6 +856,7 @@ in
     sox.sandbox.autodetectCliPaths = "existingFileOrParent";
     sox.sandbox.whitelistAudio = true;
 
+    space-cadet-pinball.buildCost = 1;
     space-cadet-pinball.persist.byStore.plaintext = [ ".local/share/SpaceCadetPinball" ];
     space-cadet-pinball.sandbox.method = "bwrap";
     space-cadet-pinball.sandbox.whitelistAudio = true;
@@ -832,6 +877,7 @@ in
     subversion.sandbox.whitelistPwd = true;
     sudo.sandbox.enable = false;
 
+    superTux.buildCost = 1;
     superTux.sandbox.method = "bwrap";
     superTux.sandbox.wrapperType = "inplace";  # package Makefile incorrectly installs to $out/games/superTux instead of $out/share/games
     superTux.sandbox.whitelistAudio = true;
@@ -850,12 +896,14 @@ in
 
     tdesktop.persist.byStore.private = [ ".local/share/TelegramDesktop" ];
 
+    tokodon.buildCost = 1;
     tokodon.persist.byStore.private = [ ".cache/KDE/tokodon" ];
 
     tree.sandbox.method = "landlock";
     tree.sandbox.autodetectCliPaths = true;
     tree.sandbox.whitelistPwd = true;
 
+    tumiki-fighters.buildCost = 1;
     tumiki-fighters.sandbox.method = "bwrap";
     tumiki-fighters.sandbox.whitelistAudio = true;
     tumiki-fighters.sandbox.whitelistDri = true;  #< not strictly necessary, but triples CPU perf
@@ -874,12 +922,16 @@ in
       "/sys/bus/usb"
     ];
 
+    valgrind.buildCost = 1;
+    valgrind.sandbox.enable = false;  #< it's a launcher: can't sandbox
+
     visidata.sandbox.method = "bwrap";  # TODO:sandbox: untested
     visidata.sandbox.autodetectCliPaths = true;
 
     # `vulkaninfo`, `vkcube`
     vulkan-tools.sandbox.method = "landlock";
 
+    vvvvvv.buildCost = 1;
     vvvvvv.sandbox.method = "bwrap";
     vvvvvv.sandbox.whitelistAudio = true;
     vvvvvv.sandbox.whitelistDri = true;  #< playable without, but burns noticably more CPU
@@ -900,6 +952,7 @@ in
     wget.sandbox.net = "all";
     wget.sandbox.whitelistPwd = true;  # saves to pwd by default
 
+    whalebird.buildCost = 1;
     whalebird.persist.byStore.private = [ ".config/Whalebird" ];
 
     # `wg`, `wg-quick`

hosts/common/programs/audacity.nix

@@ -14,6 +14,8 @@
       };
     };
 
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.whitelistAudio = true;
     sandbox.whitelistWayland = true;

hosts/common/programs/blast-ugjka/blast-to-default

@@ -2,10 +2,7 @@
 #!nix-shell -i python3 -p "python3.withPackages (ps: [  ])" -p blast-ugjka
 # vim: set filetype=python :
 
-import ctypes
 import logging
-import os
-import signal
 import socket
 import subprocess
 
@@ -16,53 +13,9 @@ logger = logging.getLogger(__name__)
 # map from known devices -> required flags
 DEVICE_MAP = {
   "Theater TV": [],
-  "[LG] webOS TV OLED55C9PUA": [ "-usewav" ],
+  "Cuddlevision": [ "-usewav" ],
 }
 
-def set_pdeathsig(sig=signal.SIGTERM):
-    """
-    helper function to ensure once parent process exits, its children processes will automatically die.
-    see: <https://stackoverflow.com/a/43152455>
-    see: <https://www.man7.org/linux/man-pages/man2/prctl.2.html>
-    """
-    libc = ctypes.CDLL("libc.so.6")
-    return libc.prctl(1, sig)
-
-MY_PID = None
-
-def reap_children(sig=None, frame=None):
-    global MY_PID
-    # reset SIGTERM handler to avoid recursing
-    signal.signal(signal.SIGTERM, signal.Handlers.SIG_DFL)
-    logger.info("killing all children (of pid %d)", MY_PID)
-    os.killpg(MY_PID, signal.SIGTERM)
-
-def reap_on_exit():
-    """
-    catch when the parent exits, and map that to SIGTERM for this process.
-    when this process receives SIGTERM, also terminate all descendent processes.
-
-    this is done because:
-    1. mpv invokes this, but (potentially) via the sandbox wrapper.
-    2. when mpv exits, it `SIGKILL`s that sandbox wrapper.
-    3. bwrap does not pass SIGKILL or SIGTERM to its child.
-    4. hence, we neither receive that signal NOR can we pass it on simply by killing our immediate children
-       (since any bwrap'd children wouldn't pass that signal on...)
-    really, the proper fix would be on mpv's side:
-    - mpv should create a new process group when it launches a command, and kill that process group on exit.
-    or fix this in the sandbox wrapper:
-    - why *doesn't* bwrap forward the signals?
-    - there's --die-with-parent, but i can't apply that *system wide* and expect reasonably behavior
-      <https://github.com/containers/bubblewrap/issues/529>
-    """
-    global MY_PID
-    MY_PID = os.getpid()
-    # create a new process group, pgid = gid
-    os.setpgid(MY_PID, MY_PID)
-
-    set_pdeathsig(signal.SIGTERM)
-    signal.signal(signal.SIGTERM, reap_children)
-
 def get_ranked_ip_addrs():
     """
     return the IP addresses most likely to be LAN addresses
@@ -96,8 +49,6 @@ class BlastDriver:
             stdin=subprocess.PIPE,
             stdout=subprocess.PIPE,
             stderr=subprocess.PIPE,
-            # this pdeathsig isn't necessary; seems it might result in leaked pulse outputs
-            # preexec_fn=set_pdeathsig
         )
         self.blast_flags = list(blast_flags)
         self.receiver_names = []
@@ -202,15 +153,11 @@ def main():
     logging.basicConfig()
     logging.getLogger().setLevel(logging.DEBUG)
 
-    reap_on_exit()
-
     blast = try_blast()
 
     if blast is not None:
         logger.info("waiting until blast exits")
         blast.blast.wait()
 
-    reap_children()
-
 if __name__ == "__main__":
     main()

hosts/common/programs/blast-ugjka/default.nix

@@ -42,9 +42,9 @@ in
     sandbox.extraConfig = [
       # else it fails to reap its children (or, maybe, it fails to hook its parent's death signal?)
       # might be possible to remove this, but kinda hard to see a clean way.
-      "--sane-sandbox-keep-namespace" "pid"
+      "--sanebox-keep-namespace" "pid"
     ];
-    suggestedPrograms = [ "blast-ugjka" ];
+    suggestedPrograms = [ "blast-ugjka" "sane-die-with-parent" ];
   };
 
   networking.firewall.allowedTCPPorts = lib.mkIf cfg.enabled [ 9000 ];

hosts/common/programs/bonsai.nix

@@ -99,18 +99,12 @@ in
             type = types.listOf transitionType;
             default = [];
           };
-          configFile = mkOption {
-            type = types.path;
-            default = pkgs.writeText "bonsai_tree.json" (builtins.toJSON cfg.config.transitions);
-            description = ''
-              configuration file to pass to bonsai.
-              usually auto-generated from the sibling options; exposed mainly for debugging or convenience.
-            '';
-          };
         };
       };
     };
 
+    fs.".config/bonsai/bonsai_tree.json".symlink.text = builtins.toJSON cfg.config.transitions;
+
     sandbox.method = "bwrap";
     sandbox.extraRuntimePaths = [
       "/"  #< just needs "bonsai", but needs to create it first...
@@ -119,7 +113,8 @@ in
     services.bonsaid = {
       description = "bonsai: programmable input dispatcher";
       partOf = [ "graphical-session" ];
-      command = "bonsaid -t ${cfg.config.configFile}";
+      # nice -n -11 chosen arbitrarily. i hope this will allow for faster response to inputs, but without audio underruns (pipewire is -21, dino -15-ish)
+      command = "nice -n -11 bonsaid -t $HOME/.config/bonsai/bonsai_tree.json";
       cleanupCommand = "rm -f $XDG_RUNTIME_DIR/bonsai";
     };
   };

hosts/common/programs/callaudiod.nix

@@ -0,0 +1,22 @@
+# https://gitlab.com/mobian1/callaudiod
+# device support:
+# - moby:
+#   - mic muting works fine
+#   - speaker seems to have zero volume (maybe it's my alsa profiles?)
+#   - shows some failures when only the modem is online (no wifi)
+#     - gnome-calls doesn't even create an output audio stream, for example; and the other end of the call can't hear any mic.
+# - desko: unsupported. no mic muting, etc.
+#   - "Card 'alsa_card.pci-0000_0b_00.1' lacks speaker and/or earpiece port, skipping"
+#   - "callaudiod-pulse-CRITICAL **: 07:45:48.092: No suitable card found, stopping here..."
+{ pkgs, ... }:
+{
+  sane.programs.callaudiod = {
+    packageUnwrapped = pkgs.rmDbusServices pkgs.callaudiod;
+
+    services.callaudiod = {
+      description = "callaudiod: dbus service to switch audio profiles and mute microphone";
+      partOf = [ "default" ];
+      command = "callaudiod";
+    };
+  };
+}

hosts/common/programs/calls.nix

@@ -1,20 +1,14 @@
 # GNOME calls
 # - <https://gitlab.gnome.org/GNOME/calls>
 # - both a dialer and a call handler.
-# - uses callaudiod dbus package.
+# - uses callaudiod dbus service.
 #
 # initial JMP.chat configuration:
 # - message @cheogram.com "reset sip account"  (this is not destructive, despite the name)
 # - the bot will reply with auto-generated username/password plus a SIP server endpoint.
 #   just copy those into gnome-calls' GUI configurator
-# - now gnome-calls can do outbound calls. inbound calls requires more chatting with the help bot
+# - now gnome-calls can do outbound calls. inbound calls can be routed by messaging the bot: "configure calls"
-#
+{ config, lib, pkgs, ... }:
-# my setup here is still very WIP.
-# open questions:
-# - can i receive calls even with GUI closed?
-#   - e.g. activated by callaudiod?
-#   - looks like `gnome-calls --daemon` does that?
-{ config, lib, ... }:
 let
   cfg = config.sane.programs.calls;
 in
@@ -25,31 +19,52 @@ in
       type = types.submodule {
         options.autostart = mkOption {
           type = types.bool;
-          default = false;
+          default = true;
         };
       };
     };
 
+    packageUnwrapped = pkgs.calls.overrideAttrs (upstream: {
+      patches = (upstream.patches or []) ++ [
+        (pkgs.fetchpatch {
+          # usability improvement... if the UI is visible, then i can receive calls. otherwise, i can't!
+          url = "https://git.uninsane.org/colin/gnome-calls/commit/a19166d85927e59662fae189a780eed18bf876ce.patch";
+          name = "exit on close (i.e. never daemonize)";
+          hash = "sha256-NoVQV2TlkCcsBt0uwSyK82hBKySUW4pADrJVfLFvWgU=";
+        })
+      ];
+    });
+
+    sandbox.method = "bwrap";
+    sandbox.net = "clearnet";
+    sandbox.whitelistAudio = true;
+    sandbox.whitelistDbus = [ "user" ];  # necessary for secrets, at the minimum
+    sandbox.whitelistWayland = true;
+
     persist.byStore.private = [
       # ".cache/folks"      # contact avatars?
       # ".config/calls"
       ".local/share/calls"  # call "records"
       # .local/share/folks  # contacts?
     ];
+    # this is only the username/endpoint: the actual password appears to be stored in gnome-keyring
     secrets.".config/calls/sip-account.cfg" = ../../../secrets/common/gnome_calls_sip-account.cfg.bin;
     suggestedPrograms = [
+      "callaudiod"  # runtime dependency (optional, but probably needed for mic muting?)
       "feedbackd"  # needs `phone-incoming-call`, in particular
+      "gnome-keyring"  # to remember the password
     ];
 
     services.gnome-calls = {
-      # TODO: prevent gnome-calls from daemonizing when started manually
       description = "gnome-calls daemon to monitor incoming SIP calls";
       partOf = lib.mkIf cfg.config.autostart [ "graphical-session" ];
       # add --verbose for more debugging
-      command = "env G_MESSAGES_DEBUG=all gnome-calls --daemon";
+      # add --daemon to avoid showing UI on launch.
+      #   note that no matter the flags, it returns to being a daemon whenever the UI is manually closed,
+      #   revealed when launched.
+      # default latency is 10ms, which is too low and i get underruns on moby.
+      # 50ms is copied from dino, not at all tuned.
+      command = "env G_MESSAGES_DEBUG=all PULSE_LATENCY_MSEC=50 gnome-calls";
     };
   };
-  programs.calls = lib.mkIf cfg.enabled {
-    enable = true;
-  };
 }

hosts/common/programs/celeste64.nix

@@ -1,6 +1,8 @@
 { ... }:
 {
   sane.programs.celeste64 = {
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.whitelistAudio = true;
     sandbox.whitelistDri = true;

hosts/common/programs/cozy.nix

@@ -13,6 +13,8 @@
       '';
     });
 
+    buildCost = 1;
+
     sandbox.method = "bwrap";  # landlock gives: _multiprocessing.SemLock: Permission Denied
     sandbox.whitelistAudio = true;
     sandbox.whitelistDbus = [ "user" ];  # mpris

hosts/common/programs/cups.nix

@@ -0,0 +1,34 @@
+# docs: <https://wiki.nixos.org/wiki/Printing>
+# to add a printer:
+# 1. <http://localhost:631/admin/>
+# 2. click "find new printers" and follow prompts
+#   - prefer to use the "Generic IPP Everywhere Printer" driver
+# alternatively, add/modify printers by running
+# - `system-config-printer`
+{ config, lib, ... }:
+let
+  cfg = config.sane.programs.cups;
+in
+{
+  sane.programs.cups = {
+    suggestedPrograms = [
+      "system-config-printer"
+    ];
+  };
+  sane.programs.system-config-printer = {};
+
+  services.printing = lib.mkIf cfg.enabled {
+    enable = true;
+    startWhenNeeded = false;  #< a.k.a. socket activated?
+    # webInterface = false;
+    # logLevel = "debug";  # default: "info"
+    # extraConfig = "<lines ... >";
+    # drivers = [ <cups driver packages...> ]
+  };
+  # services.avahi = lib.mkIf cfg.enabled {
+  #   # only needed for wireless printing
+  #   enable = true;
+  #   nssmdns4 = true;
+  #   openFirewall = true;
+  # };
+}

hosts/common/programs/curlftpfs.nix

@@ -21,5 +21,15 @@
         ln -s curlftpfs $out/bin/mount.curlftpfs
       '';
     });
+
+    # TODO: try to sandbox this better? maybe i can have fuse (unsandboxed) invoke curlftpfs (sandboxed)?
+    # - landlock gives EPERM
+    # - bwrap just silently doesn't mount it, maybe because of setuid stuff around fuse?
+    # sandbox.method = "capshonly";
+    # sandbox.net = "all";
+    # sandbox.capabilities = [
+    #   "sys_admin"
+    #   "sys_module"
+    # ];
   };
 }

hosts/common/programs/default.nix

@@ -14,6 +14,7 @@
     ./bonsai.nix
     ./brave.nix
     ./bubblewrap.nix
+    ./callaudiod.nix
     ./calls.nix
     ./cantata.nix
     ./catt.nix
@@ -21,20 +22,23 @@
     ./chatty.nix
     ./conky
     ./cozy.nix
+    ./cups.nix
     ./curlftpfs.nix
     ./dconf.nix
     ./deadd-notification-center
     ./dialect.nix
     ./dino.nix
     ./dissent.nix
+    ./dtrx.nix
+    ./eg25-control.nix
     ./element-desktop.nix
     ./engrampa.nix
     ./epiphany.nix
+    ./errno.nix
     ./evince.nix
     ./fcitx5.nix
     ./feedbackd.nix
     ./firefox.nix
-    ./firejail.nix
     ./flare-signal.nix
     ./fontconfig.nix
     ./fractal.nix
@@ -45,6 +49,7 @@
     ./gdbus.nix
     ./geary.nix
     ./git.nix
+    ./gnome-clocks.nix
     ./gnome-feeds.nix
     ./gnome-keyring
     ./gnome-maps.nix
@@ -52,7 +57,9 @@
     ./go2tv.nix
     ./gpodder.nix
     ./grimshot.nix
+    ./gst-device-monitor.nix
     ./gthumb.nix
+    ./gvfs.nix
     ./handbrake.nix
     ./helix.nix
     ./htop
@@ -62,6 +69,7 @@
     ./komikku.nix
     ./koreader
     ./less.nix
+    ./lftp.nix
     ./libreoffice.nix
     ./lemoa.nix
     ./loupe.nix
@@ -69,17 +77,20 @@
     ./megapixels.nix
     ./mepo.nix
     ./mimeo
+    ./modemmanager.nix
     ./mopidy.nix
     ./mpv
     ./msmtp.nix
     ./nautilus.nix
     ./neovim.nix
+    ./networkmanager.nix
     ./newsflash.nix
     ./nheko.nix
     ./nicotine-plus.nix
     ./nix-index.nix
     ./notejot.nix
     ./ntfy-sh.nix
+    ./objdump.nix
     ./obsidian.nix
     ./offlineimap.nix
     ./open-in-mpv.nix
@@ -90,10 +101,13 @@
     ./rhythmbox.nix
     ./ripgrep.nix
     ./rofi
+    ./rtkit.nix
     ./s6-rc.nix
     ./sane-input-handler
+    ./sane-open.nix
     ./sane-screenshot.nix
     ./sane-scripts.nix
+    ./sanebox.nix
     ./schlock.nix
     ./sfeed.nix
     ./signal-desktop.nix
@@ -122,6 +136,7 @@
     ./wine.nix
     ./wireplumber.nix
     ./wireshark.nix
+    ./wpa_supplicant.nix
     ./wvkbd.nix
     ./xarchiver.nix
     ./xdg-desktop-portal.nix
@@ -132,6 +147,7 @@
     ./zathura.nix
     ./zeal.nix
     ./zecwallet-lite.nix
+    ./zulip.nix
     ./zsh
   ];
 

hosts/common/programs/dialect.nix

@@ -1,15 +1,6 @@
 { pkgs, ... }:
 {
   sane.programs.dialect = {
-    sandbox.method = "bwrap";
-    sandbox.wrapperType = "inplace";  # share/search_providers/ calls back into the binary, weird wrap semantics
-    sandbox.whitelistWayland = true;
-    sandbox.net = "clearnet";
-    sandbox.extraHomePaths = [
-      ".config/dconf"  # won't start without it
-    ];
-    suggestedPrograms = [ "dconf" ];  #< to persist settings
-
     packageUnwrapped = pkgs.dialect.overrideAttrs (upstream: {
       # TODO: send upstream
       # TODO: figure out how to get audio working
@@ -18,5 +9,17 @@
         pkgs.glib-networking  # for TLS
       ];
     });
+
+    suggestedPrograms = [ "dconf" ];  #< to persist settings
+
+    buildCost = 1;
+
+    sandbox.method = "bwrap";
+    sandbox.wrapperType = "inplace";  # share/search_providers/ calls back into the binary, weird wrap semantics
+    sandbox.whitelistWayland = true;
+    sandbox.net = "clearnet";
+    sandbox.extraHomePaths = [
+      ".config/dconf"  # won't start without it
+    ];
   };
 }

hosts/common/programs/dino.nix

@@ -22,17 +22,17 @@
 # - mic is sometimes disabled at call start despite presenting as enabled
 #   - fix is to toggle it off -> on in the Dino UI
 # - default mic gain is WAY TOO MUCH (heavily distorted)
-# - TODO: dino should have more optimal niceness/priority to ensure it can process its buffers
+# - on lappy/desktop, right-clicking the mic button allows to toggle audio devices, but impossible to trigger this on moby/touch screen!
-#   - possibly this is solved by enabling RealtimeKit (rtkit)
 # - TODO: see if Dino calls work better with `echo full > /sys/kernel/debug/sched/preempt`
 #
 # probably fixed:
 # - once per 1-2 minutes dino will temporarily drop mic input:
-#   - `rtp-WRNING: plugin.vala:148: Warning in pipeline: Can't record audio fast enough
+#   - `rtp-WARNING: plugin.vala:148: Warning in pipeline: Can't record audio fast enough
 #   - this was *partially* fixed by bumping the pipewire mic buffer to 2048 samples (from ~512)
 #   - this was further fixed by setting PULSE_LATENCY_MSEC=20.
 #   - possibly Dino should be updated internally: `info.rate / 100` -> `info.rate / 50`.
 #     - i think that affects the batching for echo cancellation, adaptive gain control, etc.
+#   - dino *should* be able to use Pipewire directly for calls instead of going through pulse, but had trouble achieving that in actuality
 #
 { config, lib, pkgs, ... }:
 let
@@ -50,16 +50,25 @@ in
       };
     };
 
-    packageUnwrapped = pkgs.dino.overrideAttrs (upstream: {
+    packageUnwrapped = (pkgs.dino.override {
+      # XXX(2024/04/24): build without echo cancelation (i.e. force WITH_VOICE_PROCESSOR to be undefined).
+      # this means that if the other end of the call is on speaker phone, i'm liable to hear my own voice
+      # leave their speaker, enter their mic, and then return to me.
+      # the benefit is a >50% reduction in CPU use. insignificant on any modern PC; make-or-break on a low-power Pinephone.
+      webrtc-audio-processing = null;
+    }).overrideAttrs (upstream: {
       # i'm updating experimentally to see if it improves call performance.
       # i don't *think* this is actually necessary; i don't notice any difference.
-      version = "0.4.3-unstable-2024-04-01";
+      version = "0.4.3-unstable-2024-04-28";
       src = lib.warnIf (lib.versionOlder "0.4.3" upstream.version) "dino update: safe to remove sane patches" pkgs.fetchFromGitHub {
         owner = "dino";
         repo = "dino";
-        rev = "d9fa4daa6a7d16f5f0e2183a77ee2d07849dd9f3";
+        rev = "657502955567dd538e56f300e075c7db52e25d74";
-        hash = "sha256-vJBIMsMLlK8Aw19fD2aFNtegXkjOqEgb3m1hi3fE5DE=";
+        hash = "sha256-SApJy9FgxxLOB5A/zGtpdFZtSqSiS03vggRrCte1tFE=";
       };
+      # avoid double-application of upstreamed patches
+      # https://github.com/NixOS/nixpkgs/pull/309265
+      patches = [];
       checkPhase = ''
         runHook preCheck
         ./xmpp-vala-test
@@ -96,17 +105,29 @@ in
       # audio buffering; see: <https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/FAQ#pipewire-buffering-explained>
       # dino defaults to 10ms mic buffer, which causes underruns, which Dino handles *very* poorly
       # as in, the other end of the call will just not receive sound from us for a couple seconds.
-      # pipewire uses power-of-two buffering for the mic itself. that would put us at 21.33 ms, but this env var supports only whole numbers (21ms ends up not power-of-two).
+      # pipewire uses power-of-two buffering for the mic itself (by default), but this env var supports only whole numbers, which isn't quite reconcilable:
-      # also, Dino's likely still doing things in 10ms batches internally anyway.
+      # - 1024/48000 = 21.33ms
+      # - 2048/48000 = 42.67ms
+      # - 4096/48000 = 85.33ms
+      # also, Dino's likely still doing things in 10ms batches internally.
+      #
+      # note that this number supposedly is just the buffer size which Dino asks Pulse (pipewire) to share with it.
+      # in theory, it's equivalent to adjusting pipewire's quanta setting, and so isn't additive to the existing pipewire buffers.
+      # (and would also be overriden by pipewire's quanta.min setting).
+      # but in practice, setting this seems to have some more effect beyond just the buffer sizes visible in `pw-top`.
       #
       # further: decrease the "niceness" of dino, so that it can take precedence over anything else.
       # ideally this would target just the audio processing, rather than the whole program.
       # pipewire is the equivalent of `nice -n -21`, so probably don't want to go any more extreme than that.
-      # nice -n -15 chosen arbitrarily; not optimized
+      # nice -n -15 chosen arbitrarily; not optimized (and seems to have very little impact in practice anyway).
+      # buffer size:
+      # - 1024 (PULSE_LATENCY_MSEC=20): `pw-top` shows several underruns per second.
+      # - 2048 (PULSE_LATENCY_MSEC=50): `pw-top` shows very few underruns: maybe 1-5 per minute. with voice processor disabled, this works well. with it enabled, i still get gaps in which the mic "disappears".
+      # - 4096 (PULSE_LATENCY_MSEC=100): `pw-top` shows 0 underruns. with voice processor disabled, i seem to be permanently muted. with it enabled, this works well.
       #
       # note that debug logging during calls produces so much journal spam that it pegs the CPU and causes dropped audio
       # env G_MESSAGES_DEBUG = "all";
-      command = "env PULSE_LATENCY_MSEC=20 nice -n -15 dino";
+      command = "env PULSE_LATENCY_MSEC=50 nice -n -15 dino";
     };
   };
 }

hosts/common/programs/dtrx.nix

@@ -0,0 +1,16 @@
+{ pkgs, ... }:
+{
+  sane.programs.dtrx = {
+    packageUnwrapped = pkgs.dtrx.override {
+      # `binutils` is the nix wrapper, which reads nix-related env vars
+      # before passing on to e.g. `ld`.
+      # dtrx probably only needs `ar` at runtime, not even `ld`.
+      binutils = pkgs.binutils-unwrapped;
+      # build without rpm support, since `rpm` package doesn't cross-compile.
+      rpm = null;
+    };
+    sandbox.method = "bwrap";
+    sandbox.whitelistPwd = true;
+    sandbox.autodetectCliPaths = "existing";  #< for the archive
+  };
+}

hosts/common/programs/eg25-control.nix

@@ -0,0 +1,58 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.sane.programs.eg25-control;
+in
+{
+  sane.programs.eg25-control = {
+    suggestedPrograms = [ "modemmanager" ];
+
+    services.eg25-control-powered = {
+      description = "eg25-control-powered: power to the Qualcomm eg25 modem used by PinePhone";
+      startCommand = "eg25-control --power-on --verbose";
+      cleanupCommand = "eg25-control --power-off --verbose";
+      # depends = [ "ModemManager" ]
+    };
+
+    services.eg25-control-gps = {
+      # TODO: separate almanac upload from GPS enablement
+      # - don't want to re-upload the almanac everytime the GPS is toggled
+      # - want to upload almanac even when GPS *isn't* enabled, if we have internet connection.
+      description = "eg25-control-gps: background GPS tracking";
+      startCommand = "eg25-control --enable-gps --dump-debug-info --verbose";
+      cleanupCommand = "eg25-control --disable-gps --dump-debug-info --verbose";
+      depends = [ "eg25-control-powered" ];
+    };
+
+    persist.byStore.plaintext = [ ".cache/eg25-control" ];  #< for cached agps data
+  };
+
+  # TODO: port to s6
+  systemd.services.eg25-control-freshen-agps = lib.mkIf cfg.enabled {
+    description = "keep assisted-GPS data fresh";
+    serviceConfig = {
+      # XXX: this can have a race condition with eg25-control-gps
+      # - eg25-control-gps initiates DL of new/<agps>
+      # - eg25-control-gps tests new/<agps>: it works
+      # - eg25-control-freshen-agps initiates DL of new/<agps>
+      # - eg25-control-gps: moves new/<agps> into cache/
+      #   - but it moved the result (possibly incomplete) of eg25-control-freshen-agps, incorrectly
+      # in practice, i don't expect much issue from this.
+      ExecStart = "${cfg.package}/bin/eg25-control --ensure-agps-cache --verbose";
+      Restart = "no";
+
+      User = "colin";
+    };
+    startAt = "hourly";  # this is a bit more than necessary, but idk systemd calendar syntax
+    after = [ "network-online.target" "nss-lookup.target" ];
+    requires = [ "network-online.target" ];
+    # wantedBy = [ "network-online.target" ]; # auto-start immediately after boot
+  };
+
+  services.udev.extraRules = let
+    chmod = "${pkgs.coreutils}/bin/chmod";
+    chown = "${pkgs.coreutils}/bin/chown";
+  in lib.optionalString cfg.enabled ''
+    # make Modem controllable by user
+    DRIVER=="modem-power", RUN+="${chmod} g+w /sys%p/powered", RUN+="${chown} :networkmanager /sys%p/powered"
+  '';
+}

hosts/common/programs/element-desktop.nix

@@ -9,7 +9,7 @@
   sane.programs.element-desktop = {
     packageUnwrapped = (pkgs.element-desktop.override {
       # use pre-built electron because otherwise it takes 4 hrs to build from source.
-      electron = pkgs.electron_28-bin;
+      electron = pkgs.electron-bin;
     }).overrideAttrs (upstream: {
       # fix to use wayland instead of Xwayland:
       # - replace `NIXOS_OZONE_WL` non-empty check with `WAYLAND_DISPLAY`
@@ -25,6 +25,8 @@
       "gnome-keyring"
     ];
 
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.net = "clearnet";
     sandbox.whitelistAudio = true;

hosts/common/programs/epiphany.nix

@@ -23,6 +23,8 @@
       "tmp"
     ];
 
+    buildCost = 2;
+
     # XXX(2023/07/08): running on moby without `WEBKIT_DISABLE_SANDBOX...` fails, with:
     # - `bwrap: Can't make symlink at /var/run: File exists`
     # this could be due to:

hosts/common/programs/errno.nix

@@ -0,0 +1,8 @@
+{ pkgs, ... }:
+{
+  sane.programs.errno = {
+    packageUnwrapped = pkgs.linkIntoOwnPackage pkgs.moreutils "bin/errno";
+
+    sandbox.method = "landlock";
+  };
+}

hosts/common/programs/evince.nix

@@ -1,6 +1,8 @@
 { ... }:
 {
   sane.programs.evince = {
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.autodetectCliPaths = true;
     sandbox.whitelistWayland = true;

hosts/common/programs/firefox.nix

@@ -207,6 +207,10 @@ in
           package = pkgs.firefox-extensions.i2p-in-private-browsing;
           enable = lib.mkDefault config.services.i2p.enable;
         };
+        i-still-dont-care-about-cookies = {
+          package = pkgs.firefox-extensions.i-still-dont-care-about-cookies;
+          enable = lib.mkDefault true;
+        };
         open-in-mpv = {
           # test: `open-in-mpv 'mpv:///open?url=https://www.youtube.com/watch?v=dQw4w9WgXcQ'`
           package = pkgs.firefox-extensions.open-in-mpv;
@@ -310,8 +314,8 @@ in
           // scrollbar configuration, see: <https://artemis.sh/2023/10/12/scrollbars.html>
           // style=4 gives rectangular scrollbars
           // could also enable "always show scrollbars" in about:preferences -- not sure what the actual pref name for that is
-          // note that too-large scrollbars (like 50px wide) tend to obscure content (and make buttons unclickable)
+          // note that too-large scrollbars (like 50px wide, even 20px) tend to obscure content (and make buttons unclickable)
-          defaultPref("widget.non-native-theme.scrollbar.size.override", 20);
+          defaultPref("widget.non-native-theme.scrollbar.size.override", 14);
           defaultPref("widget.non-native-theme.scrollbar.style", 4);
 
           // disable inertial/kinetic/momentum scrolling because it just gets in the way on touchpads
@@ -347,7 +351,7 @@ in
 
         # TODO: env.PASSWORD_STORE_DIR only needs to be present within the browser session.
         env.PASSWORD_STORE_DIR = "/home/colin/knowledge/secrets/accounts";
-        # alternative to PASSWORD_STORE_DIR, but firejail doesn't handle this symlink well
+        # alternative to PASSWORD_STORE_DIR:
         # fs.".password-store".symlink.target = lib.mkIf cfg.addons.browserpass-extension.enable "knowledge/secrets/accounts";
 
         # flush the cache to disk to avoid it taking up too much tmp.

hosts/common/programs/firejail.nix

@@ -1,8 +0,0 @@
-{ lib, config, ... }:
-{
-  sane.programs.firejail = {};
-
-  programs.firejail = lib.mkIf config.sane.programs.firejail.enabled {
-    enable = true;  #< install the suid binary
-  };
-}

hosts/common/programs/fontconfig.nix

@@ -30,6 +30,30 @@ let
   nerdfontPkgs = builtins.map
     (f: pkgs.nerdfonts.override { fonts = [ f ]; })
     wantedNerdfonts;
+
+  # see: <repo:nixos/nixpkgs:nixos/modules/config/fonts/fontconfig.nix>
+  # and: <repo:nixos/nixpkgs:pkgs/development/libraries/fontconfig/make-fonts-cache.nix>
+  # nixpkgs creates a fontconfig cache, but only when *not* cross compiling.
+  # but the alternative is that fonts are cached purely at runtime, in ~/.cache/fontconfig,
+  # and that needs to either be added to the sandbox of *every* app,
+  # or font-heavy apps are several *seconds* slower to launch.
+  #
+  # TODO: upstream this into `make-fonts-cache.nix`?
+  cache = (pkgs.makeFontsCache { fontDirectories = config.fonts.packages; }).overrideAttrs (upstream: {
+    buildCommand = lib.replaceStrings
+      [ "fc-cache" ]
+      [ "${pkgs.stdenv.hostPlatform.emulator pkgs.buildPackages} ${pkgs.fontconfig.bin}/bin/fc-cache" ]
+      upstream.buildCommand
+    ;
+  });
+  cacheConf = pkgs.writeTextDir "etc/fonts/conf.d/01-nixos-cache-cross.conf" ''
+    <?xml version='1.0'?>
+    <!DOCTYPE fontconfig SYSTEM 'urn:fontconfig:fonts.dtd'>
+    <fontconfig>
+      <!-- Pre-generated font caches -->
+      <cachedir>${cache}</cachedir>
+    </fontconfig>
+  '';
 in
 {
   sane.programs.fontconfig = {
@@ -64,6 +88,8 @@ in
         "DejaVu Sans"
       ];
     };
+    # nixpkgs builds a cache file, but only for non-cross. i want it always, so add my own cache -- but ONLY for cross.
+    fontconfig.confPackages = lib.mkIf (pkgs.stdenv.hostPlatform != pkgs.stdenv.buildPlatform) [ cacheConf ];
     #vvv enables dejavu_fonts, freefont_ttf, gyre-fonts, liberation_ttf, unifont, noto-fonts-emoji
     enableDefaultPackages = false;
     packages = with pkgs; [

hosts/common/programs/fractal.nix

@@ -24,8 +24,7 @@ in
 {
   sane.programs.fractal = {
     packageUnwrapped = pkgs.fractal-nixified.optimized;
-    # packageUnwrapped = pkgs.fractal-latest;
+    # packageUnwrapped = pkgs.fractal;
-    # packageUnwrapped = pkgs.fractal-next;
 
     sandbox.method = "bwrap";
     sandbox.net = "clearnet";

hosts/common/programs/frozen-bubble.nix

@@ -2,11 +2,6 @@
 { pkgs, ... }:
 {
   sane.programs.frozen-bubble = {
-    sandbox.method = "bwrap";
-    sandbox.net = "clearnet";  # net play
-    sandbox.whitelistAudio = true;
-    sandbox.whitelistWayland = true;
-
     packageUnwrapped = pkgs.frozen-bubble.overrideAttrs (upstream: {
       # patch so it stores its dot-files not in root ~.
       postPatch = (upstream.postPatch or "") + ''
@@ -14,6 +9,12 @@
           --replace-fail '$FBHOME   = "$ENV{HOME}/.frozen-bubble"' '$FBHOME   = "$ENV{HOME}/.local/share/frozen-bubble"'
       '';
     });
+    buildCost = 1;
+
+    sandbox.method = "bwrap";
+    sandbox.net = "clearnet";  # net play
+    sandbox.whitelistAudio = true;
+    sandbox.whitelistWayland = true;
 
     persist.byStore.plaintext = [
       ".local/share/frozen-bubble"  # preferences, high scores

hosts/common/programs/g4music.nix

@@ -8,6 +8,8 @@
 { ... }:
 {
   sane.programs.g4music = {
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.whitelistAudio = true;
     sandbox.whitelistDbus = [ "user" ];  # mpris

hosts/common/programs/geary.nix

@@ -37,7 +37,7 @@ in
     # fs.".config/geary".dir = {};
     # fs.".local/share/folks".dir = {};
 
-    slowToBuild = true;  # uses webkitgtk 4.1
+    buildCost = 3;  # uses webkitgtk 4.1
     persist.byStore.private = [
       # attachments, and email -- contained in a sqlite db
       ".local/share/geary"

hosts/common/programs/gnome-clocks.nix

@@ -0,0 +1,24 @@
+{ pkgs, ... }: {
+  sane.programs."gnome.gnome-clocks" = {
+    packageUnwrapped = pkgs.gnome.gnome-clocks.overrideAttrs (upstream: {
+      # TODO: upstream this
+      buildInputs = upstream.buildInputs ++ (with pkgs; [
+        # gnome-clocks needs `playbin` (gst-plugins-base) and `scaletempo` (gst-plugins-good)
+        # to play the alarm when a timer expires
+        gst_all_1.gstreamer
+        gst_all_1.gst-plugins-base
+        gst_all_1.gst-plugins-good
+      ]);
+    });
+
+    buildCost = 1;
+    sandbox.method = "bwrap";
+    sandbox.whitelistAudio = true;
+    sandbox.whitelistDbus = [ "user" ];  #< required (alongside .config/dconf) to remember timers
+    sandbox.whitelistWayland = true;
+    sandbox.extraPaths = [
+      ".config/dconf"  # required (alongside dbus) to remember timers
+    ];
+    suggestedPrograms = [ "dconf" ];
+  };
+}

hosts/common/programs/gnome-weather.nix

@@ -3,6 +3,8 @@
 { ... }:
 {
   sane.programs."gnome.gnome-weather" = {
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.wrapperType = "inplace";  #< /share/org.gnome.Weather/org.gnome.Weather file refers to bins by full path
     sandbox.whitelistWayland = true;

hosts/common/programs/go2tv.nix

@@ -2,8 +2,20 @@
 # - turn the tv off and on again (no, really...)
 #
 # SANITY CHECKS:
-# - `go2tv -u 'https://uninsane.org/share/AmenBreak.mp4'`
+# - `go2tv -u 'https://uninsane.org/share/Milkbags/AmenBreak.mp4'`
 #   - LGTV: works, but not seekable
+#   - Samsung: "Cannot play video."
+# - `go2tv -v /mnt/servo/media/Videos/Milkbags/AmenBreak.mp4`
+#   - Samsung: works
+# - `go2tv -v /mnt/servo/media/Videos/Milkbags/COLIN.webm`
+#   - Samsung: works
+# - `go2tv -v /mnt/servo/media/Videos/Shows/Lucky.Star/S01/S01E01-The.Girl.who.Dashes.Off.mkv`
+#   - Samsung: error 500
+# - `go2tv -tc -v /mnt/servo/media/Videos/Shows/Lucky.Star/S01/S01E01-The.Girl.who.Dashes.Off.mkv`
+#   - Samsung: error 500
+#   - note that it still advertized .mkv to the TV
+# - `cp /mnt/servo/media/Videos/Shows/Lucky.Star/S01/S01E01-The.Girl.who.Dashes.Off.mkv S01E01-The.Girl.who.Dashes.Off.mp4 && go2tv -v S01E01-The.Girl.who.Dashes.Off.mp4`
+#   - Samsung: WORKS
 # - `go2tv -u 'https://youtu.be/p3G5IXn0K7A'`
 #   - LGTV: FAILS ("this file cannot be recognized")
 #     - no fix via transcoding, altering the URI, etc.
@@ -17,6 +29,8 @@
 #   - LGTV: works
 #
 # WHEN TO TRANSCODE:
+# - mkv container + *:
+#   - Samsung: rename to .mp4 and cast that: no need to transcode
 # - mkv container + mpeg-2 video + AC-3/48k stereo audio:
 #   - LGTV: no transcoding needed
 # - mkv container + H.264 video + AAC/48k 5.1 audio:
@@ -27,6 +41,7 @@
 #   - LGTV: no transcoding needed
 # - mkv container + H.265 video + E-AC-3/48k stereo audio:
 #   - LGTV: no transcoding needed
+#
 { config, lib, pkgs, ... }:
 let
   cfg = config.sane.programs.go2tv;

hosts/common/programs/gst-device-monitor.nix

@@ -0,0 +1,24 @@
+# gst-device-monitor: gstreamer debugging tool.
+# - `gst-device-monitor-1.0 Audio/Sink`  #< show all audio sinks
+# - `gst-device-monitor-1.0 Audio/Source`  #< show all audio sources (microphones)
+# - `gst-device-monitor-1.0 Video/Source`  #< show all video sources (cameras)
+{ pkgs, ... }:
+{
+  sane.programs.gst-device-monitor = {
+    packageUnwrapped = (pkgs.linkIntoOwnPackage pkgs.gst_all_1.gst-plugins-base [
+      "bin/gst-device-monitor-1.0"
+      "share/man/man1/gst-device-monitor-1.0.1.gz"
+    ]).overrideAttrs (base: {
+      # XXX the binaries need `GST_PLUGIN_SYSTEM_PATH_1_0` set to function,
+      # but nixpkgs doesn't set those (TODO: upstream this!)
+      nativeBuildInputs = (base.nativeBuildInputs or []) ++ [
+        pkgs.wrapGAppsNoGuiHook
+      ];
+      buildInputs = (base.buildInputs or []) ++ [
+        pkgs.gst_all_1.gst-plugins-base  #< required to find Audio/Sink
+        pkgs.gst_all_1.gst-plugins-good  #< required to find Audio/Source and Video/Source
+        pkgs.pipewire  #< required for Video/Source (video4linux)
+      ];
+    });
+  };
+}

hosts/common/programs/gvfs.nix

@@ -0,0 +1,20 @@
+# gvfs is used by e.g. nautilus to mount remote filesystems (ftp://, etc)
+# TODO: gvfs depends on udisks, depends on gnupg,
+# and as part of this `keyboxd` gpg daemon gets started and does background work every minute even though i totally don't use it.
+{ config, pkgs, ... }:
+let
+  cfg = config.sane.programs.gvfs;
+in
+{
+  sane.programs.gvfs = {
+    packageUnwrapped = pkgs.gvfs.override {
+      # i don't need to mount samba shares, and samba build is expensive/flaky (mostly for cross, but even problematic on native)
+      samba = null;
+    };
+  };
+
+  services.gvfs = {
+    inherit (cfg) package;
+    enable = cfg.enabled;
+  };
+}

hosts/common/programs/handbrake.nix

@@ -1,6 +1,8 @@
 { pkgs, ... }:
 {
   sane.programs.handbrake = {
+    buildCost = 1;
+
     sandbox.method = "landlock";  #< also supports bwrap, but landlock ensures we don't write to non-mounted tmpfs dir
     sandbox.whitelistDbus = [ "user" ];  # notifications
     sandbox.whitelistWayland = true;

hosts/common/programs/htop/htoprc

@@ -45,7 +45,7 @@ sort_direction=-1
 tree_sort_direction=1
 tree_view_always_by_pid=0
 all_branches_collapsed=0
-screen:Main=PID USER TTY NICE M_RESIDENT M_PRIV STATE PERCENT_CPU PERCENT_MEM TIME Command
+screen:Main=PID USER TTY PRIORITY NICE M_RESIDENT M_PRIV STATE PERCENT_CPU PERCENT_MEM TIME Command
 .sort_key=PERCENT_CPU
 .tree_sort_key=PID
 .tree_view_always_by_pid=0

hosts/common/programs/imagemagick.nix

@@ -1,6 +1,8 @@
 { pkgs, ... }:
 {
   sane.programs.imagemagick = {
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.wrapperType = "inplace";  # /etc/ImageMagick-7/delegates.xml refers to bins by absolute path
     sandbox.whitelistPwd = true;

hosts/common/programs/kdenlive.nix

@@ -1,6 +1,15 @@
 { pkgs, ... }:
 {
   sane.programs.kdenlive = {
+    packageUnwrapped = pkgs.kdenlive.override {
+      ffmpeg-full = pkgs.ffmpeg-full.override {
+        # avoid expensive samba build for a feature i don't use
+        withSamba = false;
+      };
+    };
+
+    buildCost = 1;
+
     sandbox.method = "bwrap";
     sandbox.extraHomePaths = [
       "Music"
@@ -14,12 +23,5 @@
     sandbox.whitelistDbus = [ "user" ];  # notifications
     sandbox.whitelistDri = true;
     sandbox.whitelistWayland = true;
-
-    packageUnwrapped = pkgs.kdenlive.override {
-      ffmpeg-full = pkgs.ffmpeg-full.override {
-        # avoid expensive samba build for a feature i don't use
-        withSamba = false;
-      };
-    };
   };
 }

hosts/common/programs/komikku.nix

@@ -16,6 +16,8 @@
     sandbox.whitelistDri = true;  #< required
     sandbox.whitelistWayland = true;
 
+    buildCost = 2;
+
     secrets.".local/share/komikku/keyrings/plaintext.keyring" = ../../../secrets/common/komikku_accounts.json.bin;
     # downloads end up here, and without the toplevel database komikku doesn't know they exist.
     persist.byStore.plaintext = [

hosts/common/programs/koreader/default.nix

@@ -47,6 +47,7 @@ in {
     packageUnwrapped = pkgs.koreader-from-src;
     sandbox.method = "bwrap";  # sandboxes fine under landlock too, except for FTP
     sandbox.net = "clearnet";
+    sandbox.whitelistDbus = [ "user" ];  # for opening the web browser via portal
     sandbox.whitelistDri = true;  # reduces startup time and subjective page flip time
     sandbox.whitelistWayland = true;
     sandbox.extraHomePaths = [

hosts/common/programs/lemoa.nix

@@ -1,6 +1,7 @@
 { ... }:
 {
   sane.programs.lemoa = {
+    buildCost = 1;
     sandbox.method = "bwrap";
     sandbox.net = "clearnet";
     sandbox.whitelistDbus = [ "user" ];  # for clicking links

hosts/common/programs/lftp.nix

@@ -0,0 +1,13 @@
+{ ... }:
+{
+  sane.programs.lftp = {
+    sandbox.method = "bwrap";
+    sandbox.net = "all";
+    sandbox.extraPaths = [
+      "Music"
+      "Videos/local"
+      "Videos/servo"
+      "tmp"
+    ];
+  };
+}

hosts/common/programs/libreoffice.nix

@@ -16,7 +16,7 @@
       "tmp"
     ];
 
-    slowToBuild = true;
+    buildCost = 3;
 
     # disable first-run stuff
     fs.".config/libreoffice/4/user/registrymodifications.xcu".symlink.text = ''

hosts/common/programs/loupe.nix

@@ -30,6 +30,7 @@
     ];
 
     mime.associations = {
+      "image/avif" = "org.gnome.Loupe.desktop";
       "image/gif" = "org.gnome.Loupe.desktop";
       "image/heif" = "org.gnome.Loupe.desktop";  # apple codec
       "image/png" = "org.gnome.Loupe.desktop";

hosts/common/programs/megapixels.nix

@@ -1,6 +1,23 @@
-{ ... }:
+# config is loaded from the first one found:
+# - $PWD/config/%model.conf
+# - /etc/megapixels/config/%model.conf  (SYSCONFDIR)
+# - /usr/share/megapixels/config/%model.conf  (DATADIR -- maybe this is the package's own directory?)
+# debug with:
+# - LIBMEGAPIXELS_DEBUG=2 megapixels
+#   2 = log level debug. no higher values signify anything
+{ pkgs, ... }:
 {
   sane.programs.megapixels = {
+    packageUnwrapped = pkgs.megapixels.overrideAttrs (upstream: {
+      postPatch = (upstream.postPatch or "") + ''
+        # 2024/04/21: patch it to save photos in a more specific directory
+        substituteInPlace src/process_pipeline.c \
+          --replace-fail 'XDG_PICTURES_DIR' 'XDG_PHOTOS_DIR'
+        # 2024/04/21: patch it so the folder button works
+        substituteInPlace src/main.c \
+          --replace-fail 'g_get_user_special_dir(G_USER_DIRECTORY_PICTURES)' 'getenv("XDG_PHOTOS_DIR")'
+      '';
+    });
     # megapixels sandboxing is tough:
     # if misconfigured, preview will alternately be OK, black, or only 1/4 of it will be rendered -- with no obvious pattern.
     # adding all of ~ to the sandbox will sometimes (?) fix the flakiness, even when `strace` doesn't show it accessing any files...
@@ -16,10 +33,8 @@
     sandbox.extraHomePaths = [
       ".config/dconf"  #< else it segfaults during post-process
       # ".config/megapixels"
-      ".local/share/applications"  #< needed for viewing photos, until i can sort out the portal stuff
       ".cache/mesa_shader_cache"  # loads way faster
-      "tmp"
+      "Pictures/Photos"
-      "Pictures"  #< TODO: make this Pictures/Photos and save photos there
       # also it addresses a lot via relative path.
     ];
     sandbox.extraPaths = [
@@ -37,6 +52,12 @@
     sandbox.extraRuntimePaths = [
       "dconf"  #< else it's very spammy, and slow
     ];
+    sandbox.extraConfig = [
+      # XXX(2024/04/21): without this it fails to convert .dng -> .jpg.
+      #   "bwrap: open /proc/34/ns/ns failed: No such file or directory"
+      "--sanebox-keep-namespace" "pid"
+    ];
+
     suggestedPrograms = [ "dconf" ];  #< not sure if necessary
   };
 }

hosts/common/programs/mimeo/default.nix

@@ -57,6 +57,7 @@ in
           desktopName = "Mimeo";
           exec = "mimeo %U";
           comment = "Open files by MIME-type or file name using regular expressions.";
+          noDisplay = true;
         })
       ];
 

hosts/common/programs/modemmanager.nix

@@ -0,0 +1,38 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.sane.programs.modemmanager;
+in
+{
+  sane.programs.modemmanager = {
+    # mmcli needs /run/current-system/sw/share/dbus-1 files to function
+    enableFor.system = lib.mkIf (builtins.any (en: en) (builtins.attrValues cfg.enableFor.user)) true;
+  };
+
+  systemd.services.ModemManager = lib.mkIf cfg.enabled {
+    aliases = [ "dbus-org.freedesktop.ModemManager1.service" ];
+    after = [ "polkit.service" ];
+    requires = [ "polkit.service" ];
+    wantedBy = [ "network.target" ];
+    serviceConfig = {
+      Type = "dbus";
+      BusName = "org.freedesktop.ModemManager1";
+      # only if started with `--debug` does mmcli let us issue AT commands like
+      # `mmcli --modem any --command=<AT_CMD>`
+      ExecStart = "${cfg.package}/bin/ModemManager --debug";
+      # --debug sets DEBUG level logging: so reset
+      ExecStartPost = "${cfg.package}/bin/mmcli --set-logging=INFO";
+
+      Restart = "on-abort";
+      StandardError = "null";
+      CapabilityBoundingSet = "CAP_SYS_ADMIN CAP_NET_ADMIN";
+      ProtectSystem = true;
+      ProtectHome = true;
+      PrivateTmp = true;
+      RestrictAddressFamilies = "AF_NETLINK AF_UNIX AF_QIPCRTR";
+      NoNewPrivileges = true;
+    };
+  };
+
+  # so that ModemManager can discover when the modem appears
+  services.udev.packages = lib.mkIf cfg.enabled [ cfg.package ];
+}

hosts/common/programs/mpv/default.nix

@@ -5,6 +5,8 @@
 # - <https://github.com/mpv-player/mpv/wiki>
 # extensions i use:
 # - <https://github.com/jonniek/mpv-playlistmanager>
+# - <https://github.com/ekisu/mpv-webm>
+# - <https://github.com/mfcc64/mpv-scripts/blob/master/visualizer.lua>
 # other extensions that could be useful:
 # - list: <https://github.com/stax76/awesome-mpv>
 # - list: <https://nudin.github.io/mpv-script-directory/>
@@ -91,48 +93,46 @@ let
            local last_up = cursor.last_event['primary_up'] or { time = 0 }
            if cursor.hover_raw or last_down.time >= last_up.time then cursor:move(mouse.x, mouse.y) end"
 
-      ### patch so that the volume control corresponds to `ao-volume`, i.e. the system-wide volume.
+      ### patch so that uosc volume control is routed to sane_sysvol.
       ### this is particularly nice for moby, because it avoids the awkwardness that system volume
       ### is hard to adjust while screen is on.
-      ### note that only under alsa (`-ao=alsa`) does `ao-volume` actually correspond to system volume.
+      ### previously i used ao-volume instead of sane_sysvol: but that forced `ao=alsa`
+      ### and came with heavy perf penalties (especially when adjusting the volume)
       substituteInPlace src/uosc/main.lua \
         --replace-fail \
-          "mp.observe_property('volume', 'number', create_state_setter('volume'))" \
+          "mp.observe_property('volume'" \
-          "mp.observe_property('volume', 'number', update_ao_volume)"
+          "mp.observe_property('user-data/sane_sysvol/volume'" \
+        --replace-fail \
+          "mp.observe_property('mute'" \
+          "mp.observe_property('user-data/sane_sysvol/mute'"
       substituteInPlace src/uosc/elements/Volume.lua \
-        --replace-fail "mp.commandv('set', 'volume'" "mp.commandv('set', 'ao-volume'" \
+        --replace-fail \
-        --replace-fail "mp.set_property_native('volume'" "mp.set_property('ao-volume'"
+          "mp.commandv('set', 'volume'" \
+          "mp.set_property_number('user-data/sane_sysvol/volume'" \
+        --replace-fail \
+          "mp.set_property_native('volume'" \
+          "mp.set_property_number('user-data/sane_sysvol/volume'" \
+        --replace-fail \
+          "mp.set_property_native('mute'" \
+          "mp.set_property_bool('user-data/sane_sysvol/mute'" \
+        --replace-fail \
+          "mp.commandv('cycle', 'mute')" \
+          "mp.set_property_bool('user-data/sane_sysvol/mute', not mp.get_property_bool('user-data/sane_sysvol/mute'))"
 
-      # `ao-volume` isn't actually an observable property.
+      # tweak the top-bar "maximize" button to actually act as a "fullscreen" button.
-      # as of 2024/03/02, they *may* be working on that:
+      substituteInPlace src/uosc/elements/TopBar.lua \
-      # - <https://github.com/mpv-player/mpv/pull/13604#issuecomment-1971665736>
+        --replace-fail \
-      # in the meantime, just query the volume every tick (i.e. frame).
+          'get_maximized_command,' \
-      # alternative is mpv's JSON IPC feature, where i could notify its socket whenever pipewire volume changes.
+          '"cycle fullscreen",'
-      cat <<EOF >> src/uosc/main.lua
+    '';
-      function update_ao_volume(_, vol)
+  });
-        if vol == nil then
+  visualizer = pkgs.mpvScripts.visualizer.overrideAttrs (upstream: {
-          -- vol will be nil if called manually, instead of via observe_property
+    postPatch = (upstream.postPatch or "") + ''
-          vol = mp.get_property('ao-volume')
+      # don't have the script register its own keybinding: i'll do it manually via input.conf.
-        end
+      # substituteInPlace visualizer.lua --replace-fail \
-        if vol == nil then
+      #   'mp.add_key_binding' '-- mp.add_key_binding'
-          vol = 0
+      substituteInPlace visualizer.lua --replace-fail \
-        else
+        'cycle_key = "c"' 'cycle_key = "v"'
-          vol = tonumber(vol)
-        end
-
-        if vol ~= state.volume then
-          set_state('volume', vol)
-          request_render()
-        end
-      end
-      -- tick seems to occur on every redraw (even when volume is hidden).
-      -- in practice: for every new frame of the source, or whenever the cursor is moved.
-      mp.register_event('tick', update_ao_volume)
-      -- if paused and cursor isn't moving, then `tick` isn't called. fallback to a timer.
-      mp.add_periodic_timer(2, update_ao_volume)
-      -- invoke immediately to ensure state.volume is non-nil
-      update_ao_volume()
-      EOF
     '';
   });
   mpv-unwrapped = pkgs.mpv-unwrapped.overrideAttrs (upstream: {
@@ -148,11 +148,20 @@ let
 in
 {
   sane.programs.mpv = {
-    packageUnwrapped = pkgs.wrapMpv mpv-unwrapped {
+    packageUnwrapped = pkgs.wrapMpv
+      (mpv-unwrapped.override rec {
+        # N.B.: populating `self` to `luajit` is necessary for the resulting `lua.withPackages` function to preserve my override.
+        # i use enable52Compat in order to get `table.unpack`.
+        # i think using `luajit` here instead of `lua` is optional, just i get better perf with it :)
+        lua = pkgs.luajit.override { enable52Compat = true; self = lua; };
+      })
+      {
         scripts = [
           pkgs.mpvScripts.mpris
           pkgs.mpvScripts.mpv-playlistmanager
+          pkgs.mpvScripts.mpv-webm
           uosc
+          visualizer
           # pkgs.mpv-uosc-latest
         ];
         # extraMakeWrapperArgs = lib.optionals (cfg.config.vo != null) [
@@ -188,7 +197,8 @@ in
 
     suggestedPrograms = [
       "blast-to-default"
-      "go2tv"
+      "sane-cast"
+      "sane-die-with-parent"
       "xdg-terminal-exec"
     ];
 
@@ -201,7 +211,7 @@ in
     sandbox.whitelistWayland = true;
     sandbox.extraHomePaths = [
       ".config/mpv"  #< else mpris plugin crashes on launch
-      ".local/share/applications"  #< for xdg-terminal-exec (go2tv)
+      ".local/share/applications"  #< for xdg-terminal-exec (sane-cast)
       # it's common for album (or audiobook, podcast) images/lyrics/metadata to live adjacent to the primary file.
       # CLI detection is too poor to pick those up, so expose the common media dirs to the sandbox to make that *mostly* work.
       "Books/local"
@@ -216,13 +226,20 @@ in
       # for `watch_later`
       ".local/state/mpv"
     ];
-    fs.".config/mpv/scripts/sane/main.lua".symlink.target = ./sane-main.lua;
+    persist.byStore.private = [
+      "Videos/mpv"
+    ];
+    fs.".config/mpv/scripts/sane_cast/main.lua".symlink.target = ./sane_cast/main.lua;
+    fs.".config/mpv/scripts/sane_sysvol/main.lua".symlink.target = ./sane_sysvol/main.lua;
+    fs.".config/mpv/scripts/sane_sysvol/non_blocking_popen.lua".symlink.target = ./sane_sysvol/non_blocking_popen.lua;
     fs.".config/mpv/input.conf".symlink.target = ./input.conf;
     fs.".config/mpv/mpv.conf".symlink.target = ./mpv.conf;
     fs.".config/mpv/script-opts/osc.conf".symlink.target = ./osc.conf;
     fs.".config/mpv/script-opts/console.conf".symlink.target = ./console.conf;
     fs.".config/mpv/script-opts/uosc.conf".symlink.target = ./uosc.conf;
     fs.".config/mpv/script-opts/playlistmanager.conf".symlink.target = ./playlistmanager.conf;
+    fs.".config/mpv/script-opts/webm.conf".symlink.target = ./webm.conf;
+    fs.".config/mpv/script-opts/visualizer.conf".symlink.target = ./visualizer.conf;
 
     # mime.priority = 200;  # default = 100; 200 means to yield to other apps
     mime.priority = 50;  # default = 100; 50 in order to take precedence over vlc.

hosts/common/programs/mpv/input.conf

@@ -9,6 +9,8 @@
 POWER ignore
 VOLUME_UP ignore
 VOLUME_DOWN ignore
+# disable "double-click to toggle fullscreen", else that limits the rate at which i can seek
+MBTN_LEFT_DBL ignore
 
 # uosc menu
 # text after the shebang is parsed by uosc to construct the menu and names
@@ -17,7 +19,7 @@ s           script-binding uosc/subtitles          #! Subtitles
 a           script-binding uosc/audio              #! Audio tracks
 q           script-binding uosc/stream-quality     #! Stream quality
 p           script-binding uosc/items              #! Playlist
-c           script-binding uosc/chapters           #! Chapters
+# c           script-binding uosc/chapters           #! Chapters
 >           script-binding uosc/next               #! Navigation > Next
 <           script-binding uosc/prev               #! Navigation > Prev
 o           script-binding uosc/open-file          #! Navigation > Open file
@@ -31,7 +33,8 @@ ctrl+s      async screenshot                       #! Utils > Screenshot
 alt+i       script-binding uosc/keybinds           #! Utils > Key bindings
 O           script-binding uosc/show-in-directory  #! Utils > Show in directory
 #           script-binding uosc/open-config-directory #! Utils > Open config directory
-ctrl+r      script-binding sane/blast              #! Audiocast
+ctrl+r      script-binding sane_cast/blast              #! Audiocast
-ctrl+t      script-binding sane/go2tv-video        #! Cast
+ctrl+t      script-binding sane_cast/sane-cast          #! Cast
-#           script-binding sane/go2tv-stream       #! Cast (...) > Stream
+
-#           script-binding sane/go2tv-gui          #! Cast (...) > GUI
+# reserved: it uses this internally, isn't externally callable
+# v           script-binding cycle-visualizer

hosts/common/programs/mpv/mpv.conf

@@ -10,7 +10,9 @@ keep-open-pause=no
 
 # force GUI, even for tracks w/o album art
 # see: <https://www.reddit.com/r/mpv/comments/rvrrpt/oscosdgui_and_arch_linux/>
-player-operation-mode=pseudo-gui
+# player-operation-mode=pseudo-gui
+# actually, prefer just a subset of what's enabled by pseudo-gui, else logging breaks
+force-window=yes
 
 # use uosc instead (for On Screen Controls)
 osc=no
@@ -19,8 +21,8 @@ osd-bar=no
 # uosc will draw its own window controls if you disable window border
 border=no
 
-# ao=alsa so that uosc can work with ao-volume (see my uosc patch)
+# # ao=alsa so that uosc can work with ao-volume (see my uosc patch)
-ao=alsa
+# ao=alsa
-# with `ao-volume`, the max actually is 100.
+# # with `ao-volume`, the max actually is 100.
-# to go higher you'll have to use the system's native controls.
+# # to go higher you'll have to use the system's native controls.
-volume-max=100
+# volume-max=100

hosts/common/programs/mpv/sane-main.lua

@@ -1,34 +0,0 @@
-function subprocess(in_terminal, args)
-  if in_terminal then
-    args = { "xdg-terminal-exec", table.unpack(args) }
-  end
-  mp.command_native({
-    name = "subprocess",
-    args = args,
-    detach = false,
-    capture_stdout = false,
-    capture_stderr = false,
-    -- capture_size=0,
-    passthrough_stdin = false,
-    playback_only = false,
-  })
-end
-
-function invoke_go2tv(in_terminal, args)
-  mp.commandv("set", "pause", "yes")
-  subprocess(in_terminal, { "go2tv", table.unpack(args) })
-end
-
-function invoke_go2tv_on_open_file(mode)
-  local path = mp.get_property("stream-open-filename");
-  return invoke_go2tv(true, { mode, path })
-end
-
-mp.add_key_binding(nil, "blast", function() subprocess(false, { "blast-to-default" }) end)
-mp.add_key_binding(nil, 'go2tv-gui', function() invoke_go2tv(false, {}) end)
-mp.add_key_binding(nil, 'go2tv-video', function() invoke_go2tv_on_open_file("-v") end)
-mp.add_key_binding(nil, 'go2tv-stream', function() invoke_go2tv_on_open_file("-s") end)
-
--- uncomment for debugging:
--- if mpv fails to eval this script (e.g. syntax error), then it will fail to quit on launch
--- mp.command('quit')

hosts/common/programs/mpv/sane_cast/main.lua

@@ -0,0 +1,40 @@
+msg = require("mp.msg")
+msg.trace("load: begin")
+
+function subprocess(in_terminal, args)
+  if in_terminal then
+    args = { "xdg-terminal-exec", table.unpack(args) }
+  end
+  msg.info(table.concat(args, " "))
+  mp.command_native({
+    name = "subprocess",
+    args = args,
+    detach = false,
+    capture_stdout = false,
+    capture_stderr = false,
+    -- capture_size=0,
+    passthrough_stdin = false,
+    playback_only = false,
+  })
+end
+
+function invoke_paused(in_terminal, args)
+  mp.commandv("set", "pause", "yes")
+  for k, v in ipairs(args) do
+    if v == "@FILE@" then
+      args[k] = mp.get_property("stream-open-filename")
+    end
+  end
+  subprocess(in_terminal, args)
+end
+
+
+-- invoke blast in a way where it dies when we die, because:
+-- 1. when mpv exits, it `SIGKILL`s this toplevel subprocess.
+-- 2. `blast-to-default` could be a sandbox wrapper.
+-- 3. bwrap does not pass SIGKILL or SIGTERM to its child.
+-- 4. hence, to properly kill blast, we have to kill all the descendants.
+mp.add_key_binding(nil, "blast", function() subprocess(false, { "sane-die-with-parent", "--descendants", "--use-pgroup", "--catch-sigkill", "blast-to-default" }) end)
+mp.add_key_binding(nil, "sane-cast", function() invoke_paused(true, { "sane-cast", "--verbose", "@FILE@" }) end)
+
+msg.trace("load: complete")

hosts/common/programs/mpv/sane_sysvol/main.lua

@@ -0,0 +1,281 @@
+msg = require("mp.msg")
+msg.trace("load: begin")
+
+non_blocking_popen = require("non_blocking_popen")
+
+RD_SIZE = 65536
+
+function startswith(superstring, substring)
+  return superstring:sub(1, substring:len()) == substring
+end
+function strip_prefix(superstring, substring)
+  assert(startswith(superstring, substring))
+  return superstring:sub(1 + substring:len())
+end
+
+function ltrim(s)
+  -- remove all leading whitespace from `s`
+  local i = 1
+  while s:sub(i, i) == " " or s:sub(i, i) == "\t" do
+    i = i + 1
+  end
+  return s:sub(i)
+end
+
+function subprocess(args)
+  mp.command_native({
+    name = "subprocess",
+    args = args,
+    -- these arguments below probably don't matter: copied from sane_cast
+    detach = false,
+    capture_stdout = false,
+    capture_stderr = false,
+    passthrough_stdin = false,
+    playback_only = false,
+  })
+end
+
+function sysvol_new()
+  return {
+    -- sysvol is pipewire-native volume
+    -- it's the cube of the equivalent 0-100% value represented inside mpv
+    sysvol = nil,
+    sysmute = nil,
+    change_sysvol = function(self, mpv_vol)
+      -- called when mpv wants to set the system-wide volume
+      if mpv_vol == nil then
+        return
+      end
+
+      local old_mpv_vol = nil
+      if self.sysvol ~= nil then
+        old_mpv_vol = 100 * self.sysvol^(1/3)
+      end
+      if old_mpv_vol ~= nil and math.abs(mpv_vol - old_mpv_vol) < 1.0 then
+        -- avoid near-infinite loop where we react to our own volume change.
+        -- consider that we might be a couple messages behind in parsing pipewire when we issue this command,
+        -- hence a check on only the pipewire -> mpv side wouldn't prevent oscillation
+        msg.debug("NOT setting system-wide volume:", old_mpv_vol, volstr)
+        return
+      end
+
+      local volstr = tostring(mpv_vol) .. "%"
+      msg.debug("setting system-wide volume:", old_mpv_vol, volstr)
+      self.sysvol = (0.01*mpv_vol)^3
+      subprocess({
+        "wpctl",
+        "set-volume",
+        "@DEFAULT_AUDIO_SINK@",
+        volstr
+      })
+    end,
+    on_sysvol_change = function(self, sysvol)
+      -- called when the pipewire system volume is changed (either by us, or an external application)
+      if sysvol == nil then
+        return
+      end
+
+      local new_mpv_vol = 100 * sysvol^(1/3)
+      local old_mpv_vol = nil
+      if self.sysvol ~= nil then
+        old_mpv_vol = 100 * self.sysvol^(1/3)
+      end
+
+      if old_mpv_vol ~= nil and math.abs(new_mpv_vol - old_mpv_vol) < 1.0 then
+        -- avoid an infinite loop where we react to our own volume change
+        msg.debug("NOT announcing volume change to mpv (because it was what triggered the change):", old_mpv_vol, new_mpv_vol)
+        return
+      end
+
+      msg.debug("announcing volume change to mpv:", old_mpv_vol, new_mpv_vol)
+      self.sysvol = sysvol
+      mp.set_property_number("user-data/sane_sysvol/volume", new_mpv_vol)
+    end,
+    change_sysmute = function(self, mute)
+      if mute == nil then
+        return
+      end
+      if mute == self.sysmute then
+        msg.debug("NOT setting system-wide mute (because it didn't change)", mute)
+        return
+      end
+
+      local mutestr
+      if mute then
+        mutestr = "1"
+      else
+        mutestr = "0"
+      end
+      msg.debug("setting system-wide mute:", mutestr)
+      self.sysmute = mute
+      subprocess({
+        "wpctl",
+        "set-mute",
+        "@DEFAULT_AUDIO_SINK@",
+        mutestr
+      })
+    end,
+    on_sysmute_change = function(self, mute)
+      if mute == nil then
+        return
+      end
+
+      msg.debug("announcing mute to mpv:", mute)
+      self.sysmute = mute
+      mp.set_property_bool("user-data/sane_sysvol/mute", mute)
+    end
+  }
+end
+
+function pwmon_parser_new()
+  return {
+    -- volume: pipewire-native volume. usually 0.0 - 1.0, but can go higher (e.g. 3.25)
+    -- `wpctl get-volume` and this volume are related, in that the volume reported by
+    -- wpctl is the cube-root of this one.
+    volume = nil, -- number
+    mute = nil, -- bool
+
+    -- parser state:
+    in_device = false,
+    in_direction = false,
+    in_output = false,
+    in_vol = false,
+    in_mute = false,
+
+    feed_line = function(self, line)
+      msg.trace("pw-mon:", line)
+      line = ltrim(line)
+      if startswith(line, "changed:") or startswith(line, "added:") or startswith(line, "removed:") then
+        self.in_device = false
+        self.in_direction = false
+        self.in_output = false
+        self.in_vol = false
+        self.in_mute = false
+        self.in_properties = false
+      elseif startswith(line, "type: ") then
+        self.in_device = startswith(line, "type: PipeWire:Interface:Device")
+        msg.trace("parsed type:", line, self.in_device)
+      elseif startswith(line, "Prop: ") and self.in_device then
+        self.in_direction = startswith(line, "Prop: key Spa:Pod:Object:Param:Route:direction")
+        if self.in_direction then
+          self.in_output = false
+        end
+        -- which of the *Volumes params we read is unclear.
+        -- alternative to this is to just detect the change, and then cal wpctl get-volume @DEFAULT_AUDIO_SINK@
+        self.in_vol = startswith(line, "Prop: key Spa:Pod:Object:Param:Props:channelVolumes")
+        self.in_mute = startswith(line, "Prop: key Spa:Pod:Object:Param:Props:mute")
+        msg.trace("parsed `Prop:`", line, self.in_vol)
+      elseif line:find("Spa:Enum:Direction:Output", 1, true) and self.in_direction then
+        self.in_output = true
+      elseif startswith(line, "Float ") and self.in_device and self.in_output and self.in_vol then
+        value = tonumber(strip_prefix(line, "Float "))
+        self:feed_volume(value)
+      elseif startswith(line, "Bool ") and self.in_device and self.in_output and self.in_mute then
+        value = strip_prefix(line, "Bool ") == "true"
+        self:feed_mute(value)
+      elseif startswith(line, "properties:") and self.in_device then
+        self.in_properties = true
+      end
+    end,
+
+    feed_volume = function(self, vol)
+      msg.debug("volume:", vol)
+      self.volume = vol
+    end,
+    feed_mute = function(self, mute)
+      msg.debug("mute:", mute)
+      self.mute = mute
+    end,
+    -- get_effective_volume = function(self)
+    --   if self.mute then
+    --     return 0
+    --   else
+    --     return self.volume
+    --   end
+    -- end
+  }
+end
+
+function pwmon_new()
+  return {
+    -- non_blocking_popen handle for the pw-mon process
+    -- which can be periodically read and parsed to detect volume changes.
+    -- we have to use `sane-die-with-parent` otherwise `pw-mon` will still be active even after mpv exits.
+    handle = non_blocking_popen.non_blocking_popen("sane-die-with-parent --descendants pw-mon", RD_SIZE),
+    stdout_unparsed = "",
+    pwmon_parser = pwmon_parser_new(),
+    service = function(self)
+      -- do a single non-blocking read, and parse the result
+      -- in the *rare* case in which more than RD_SIZE data is ready, we service that remaining data on the next call
+      local buf, res = self.handle:read(RD_SIZE)
+      if res == "closed" then
+        msg.debug("pw-mon unexpectedly closed!")
+      end
+      if buf ~= nil then
+        local old_vol = self.pwmon_parser.volume
+        local old_mute = self.pwmon_parser.mute
+        self.stdout_unparsed = self.stdout_unparsed .. buf
+        self:consume_stdout()
+        local new_vol = self.pwmon_parser.volume
+        local new_mute = self.pwmon_parser.mute
+
+        if new_vol ~= old_vol then
+          msg.debug("pipewire volume change:", old_vol, new_vol)
+          mp.set_property_number("user-data/sane_sysvol/pw-mon-volume", new_vol)
+        end
+        if new_mute ~= old_mute then
+          msg.debug("pipewire mute change:", old_mute, new_mute)
+          mp.set_property_bool("user-data/sane_sysvol/pw-mon-mute", new_mute)
+        end
+      end
+    end,
+    consume_stdout = function(self)
+      local idx_newline, next_newline = 0, 0
+      while next_newline ~= nil do
+        next_newline = self.stdout_unparsed:find("\n", idx_newline + 1, true)
+        if next_newline ~= nil then
+          self.pwmon_parser:feed_line(self.stdout_unparsed:sub(idx_newline + 1, next_newline - 1))
+          idx_newline = next_newline
+        end
+      end
+      self.stdout_unparsed = self.stdout_unparsed:sub(idx_newline + 1)
+    end,
+  }
+end
+
+mp.set_property_number("user-data/sane_sysvol/volume", 0)
+mp.set_property_bool("user-data/sane_sysvol/mute", true)
+
+local sysvol = sysvol_new()
+local first_sysvol_announcement = true
+mp.observe_property("user-data/sane_sysvol/volume", "native", function(_, val)
+  -- we must set the volume property early -- before we actually know the volume
+  -- else other modules will think it's `nil` and error.
+  -- but we DON'T want the value we set to actually impact the system volume
+  if not first_sysvol_announcement then
+    sysvol:change_sysvol(val)
+  end
+  first_sysvol_announcement = false
+end)
+mp.observe_property("user-data/sane_sysvol/pw-mon-volume", "native", function(_, val)
+  sysvol:on_sysvol_change(val)
+end)
+
+local first_sysmute_announcement = true
+mp.observe_property("user-data/sane_sysvol/mute", "native", function(_, val)
+  -- we must set the mute property early -- before we actually know the mute
+  -- else other modules will think it's `nil` and error.
+  -- but we DON'T want the value we set to actually impact the system mute
+  if not first_sysmute_announcement then
+    sysvol:change_sysmute(val)
+  end
+  first_sysmute_announcement = false
+end)
+mp.observe_property("user-data/sane_sysvol/pw-mon-mute", "native", function(_, val)
+  sysvol:on_sysmute_change(val)
+end)
+
+local pwmon = pwmon_new()
+mp.register_event("tick", function() pwmon:service() end)
+
+msg.trace("load: complete")

hosts/common/programs/mpv/sane_sysvol/non_blocking_popen.lua

@@ -0,0 +1,91 @@
+-- source: <https://gist.github.com/max1220/c19ccd4d90ed32d41b879eba727cbcbd>
+-- requires: luajit
+--
+-- Implements a basic binding for popen that allows non-blocking reads
+-- returned "file" table only supports :read(with an optional size argument, no mode etc.) and :close
+ffi = require("ffi")
+-- C functions that we need
+ffi.cdef([[
+  void* popen(const char* cmd, const char* mode);
+  int pclose(void* stream);
+  int fileno(void* stream);
+  int fcntl(int fd, int cmd, int arg);
+  int *__errno_location ();
+  ssize_t read(int fd, void* buf, size_t count);
+]])
+
+-- you can compile a simple C programm to find these values(Or look in the headers)
+F_SETFL = 4
+O_NONBLOCK = 2048
+EAGAIN = 11
+
+-- this "array" holds the errno variable
+_errno = ffi.C.__errno_location()
+
+popen_meta = {
+  __index = {
+    -- close the process, prevent reading, allow garbage colletion
+    close = function(self)
+      if self._file ~= nil then
+        local _file = self._file
+        self._file = nil
+        self._fd = nil
+        self._read_buffer = nil
+        ffi.C.pclose(_file)
+      end
+    end,
+    -- read up to size bytes from the process. Returns data(string) and number of bytes read if successfull,
+    -- nil, "EAGAIN" if there is no data aviable, and
+    -- nil, "closed" if the process has ended
+    read = function(self, size)
+      if self._fd == nil then
+        return nil, "closed"
+      end
+
+      size = math.min(self._read_buffer_size, size)
+      local nbytes = ffi.C.read(self._fd, self._read_buffer, size)
+
+      if nbytes > 0 then
+        local data = ffi.string(self._read_buffer, nbytes)
+        return data, nbytes
+      elseif (nbytes == -1) and (_errno[0] == EAGAIN) then
+        return nil, "EAGAIN"
+      else
+        self:close()
+        return nil, "closed"
+      end
+    end
+  }
+  -- __gc = function(self) self:close() end
+  -- __close = function(self) p:close() end
+}
+
+local function non_blocking_popen(cmd, read_buffer_size)
+  -- the buffer for reading from the process
+  local read_buffer_size = tonumber(read_buffer_size) or 2048
+  local read_buffer = ffi.new('uint8_t[?]',read_buffer_size)
+
+  -- get a FILE* for our command
+  local file = assert(ffi.C.popen(cmd, "r"))
+
+  -- turn the FILE* to a fd (int) for fcntl
+  local fd = ffi.C.fileno(file)
+
+  -- set non-blocking mode for read
+  assert(ffi.C.fcntl(fd, F_SETFL, O_NONBLOCK)==0, "fcntl failed")
+
+  local p = {
+    _fd = fd,
+    _file = file,
+    _read_buffer = read_buffer,
+    _read_buffer_size = read_buffer_size,
+  }
+
+  setmetatable(p, popen_meta)
+
+  return p
+end
+
+return {
+  non_blocking_popen = non_blocking_popen
+}

hosts/common/programs/mpv/uosc.conf

@@ -24,7 +24,7 @@ font_scale=1.5
 font_bold=yes
 # refine=text_width: slightly better text rendering
 refine=text_width
-color=foreground=ff8080,background_text=ff8080
+color=foreground=ff968b,background_text=ff968b
 # N.B.: if `opacity=` is set non-empty, then ALL items must be specified (else they get 0 opacity).
 # opacity values *must* be a multiple of 0.1
 opacity=timeline=0.8,position=1,chapters=0.8,slider=0.8,slider_gauge=0.8,controls=0,speed=0.8,menu=1,submenu=0.4,border=1,title=0.8,tooltip=1,thumbnail=1,curtain=0.8,idle_indicator=0.8,audio_indicator=0.5,buffering_indicator=0.3,playlist_position=0.8

hosts/common/programs/mpv/visualizer.conf

@@ -0,0 +1,9 @@
+# config:
+# - <https://raw.githubusercontent.com/mfcc64/mpv-scripts/master/visualizer.lua>
+name=off
+# height: {4..12}
+# - multi functional. for spectrograph, impacts the length of its tape
+height=4
+# quality: {verylow,low,medium,high,veryhigh}
+# - multi functional. seems to impact the FFT size, and thereby how quickly the spectrograph advances
+quality=medium

hosts/common/programs/mpv/webm.conf

@@ -0,0 +1,80 @@
+# Defaults to shift+w
+keybind=c
+# If empty, saves on the same directory of the playing video.
+# A starting "~" will be replaced by the home dir.
+# This field is delimited by double-square-brackets - [[ and ]] - instead of
+# quotes, because Windows users might run into a issue when using
+# backslashes as a path separator. Examples of valid inputs for this field
+# would be: [[]] (the default, empty value), [[C:\Users\John]] (on Windows),
+# and [[/home/john]] (on Unix-like systems eg. Linux).
+# The [[]] delimiter is not needed when using from a configuration file
+# in the script-opts folder.
+output_directory=~/Videos/mpv
+run_detached=no
+# Template string for the output file
+# %f - Filename, with extension
+# %F - Filename, without extension
+# %T - Media title, if it exists, or filename, with extension (useful for some streams, such as YouTube).
+# %s, %e - Start and end time, with milliseconds
+# %S, %E - Start and end time, without milliseconds
+# %M - "-audio", if audio is enabled, empty otherwise
+# %R - "-(height)p", where height is the video's height, or scale_height, if it's enabled.
+# More specifiers are supported, see https://mpv.io/manual/master/#options-screenshot-template
+# Property expansion is supported (with %{} at top level, ${} when nested), see https://mpv.io/manual/master/#property-expansion
+output_template=%F-%S-%E
+# Scale video to a certain height, keeping the aspect ratio. -1 disables it.
+scale_height=-1
+# Change the FPS of the output video, dropping or duplicating frames as needed.
+# -1 means the FPS will be unchanged from the source.
+fps=-1
+# Target filesize, in kB. This will be used to calculate the bitrate
+# used on the encode. If this is set to <= 0, the video bitrate will be set
+# to 0, which might enable constant quality modes, depending on the
+# video codec that's used (VP8 and VP9, for example).
+target_filesize=7500
+# If true, will use stricter flags to ensure the resulting file doesn't
+# overshoot the target filesize. Not recommended, as constrained quality
+# mode should work well, unless you're really having trouble hitting
+# the target size.
+# strict_filesize_constraint=no
+# strict_bitrate_multiplier=0.95
+# In kilobits.
+strict_audio_bitrate=128
+# Sets the output format, from a few predefined ones.
+# Currently we have:
+# av1
+# hevc
+# webm-vp9 (libvpx-vp9/libopus)
+# avc (h264/AAC)
+# avc-nvenc (h264-NVENC/AAC)
+# webm-vp8 (libvpx/libvorbis)
+# gif
+# mp3 (libmp3lame)
+# and raw (rawvideo/pcm_s16le).
+output_format=avc
+twopass=yes
+# If set, applies the video filters currently used on the playback to the encode.
+apply_current_filters=yes
+# If set, writes the video's filename to the "Title" field on the metadata.
+write_filename_on_metadata=no
+# Set the number of encoding threads, for codecs libvpx and libvpx-vp9
+threads=4
+additional_flags=
+# Constant Rate Factor (CRF). The value meaning and limits may change,
+# from codec to codec. Set to -1 to disable.
+crf=10
+# Useful for flags that may impact output filesize, such as qmin, qmax etc
+# Won't be applied when strict_filesize_constraint is on.
+non_strict_additional_flags=
+# Display the encode progress, in %. Requires run_detached to be disabled.
+# On Windows, it shows a cmd popup. "auto" will display progress on non-Windows platforms.
+display_progress=auto
+# The font size used in the menu. Isn't used for the notifications (started encode, finished encode etc)
+font_size=28
+margin=30
+message_duration=20
+# gif dither mode, 0-5 for bayer w/ bayer_scale 0-5, 6 for paletteuse default (sierra2_4a)
+gif_dither=2
+# Force square pixels on output video
+# Some players like recent Firefox versions display videos with non-square pixels with wrong aspect ratio
+force_square_pixels=no

hosts/common/programs/nautilus.nix

@@ -10,6 +10,10 @@
       ]);
     }));
 
+    suggestedPrograms = [
+      "gvfs"  # browse ftp://, etc
+    ];
+
     sandbox.method = "bwrap";
     sandbox.whitelistDbus = [ "user" ];  # for portals launching apps
     sandbox.whitelistWayland = true;

hosts/common/programs/neovim.nix

@@ -103,8 +103,8 @@ in
       # "use"
     ];
 
-    # packageUnwrapped = config.programs.neovim.finalPackage;
+    packageUnwrapped = let
-    packageUnwrapped = pkgs.wrapNeovimUnstable pkgs.neovim-unwrapped (pkgs.neovimUtils.makeNeovimConfig {
+      configArgs = {
         withRuby = false;  #< doesn't cross-compile w/o binfmt
         viAlias = true;
         vimAlias = true;
@@ -150,7 +150,35 @@ in
           ${plugin-config-lua}
           EOF
         '';
+      };
+      neovim-unwrapped' = with pkgs; (neovim-unwrapped.override {
+        # optional: `neovim` defaults to luajit when not manually wrapping
+        lua = luajit;
+      }).overrideAttrs (upstream: {
+        # fix cross compilation:
+        # - neovim vendors lua `mpack` library,
+        #   which it tries to build for the wrong platform
+        #   and its vendored version has diverged in symbol names anyway
+        postPatch = (upstream.postPatch or "") + ''
+          substituteInPlace src/nvim/generators/preload.lua --replace-fail \
+            "require 'nlua0'" "
+              vim.mpack = require 'mpack'
+              vim.mpack.encode = vim.mpack.pack
+              vim.mpack.decode = vim.mpack.unpack
+              vim.lpeg = require 'lpeg'
+            "
+        '' + lib.optionalString (!stdenv.buildPlatform.canExecute stdenv.hostPlatform) ''
+          substituteInPlace runtime/CMakeLists.txt --replace-fail \
+            'COMMAND $<TARGET_FILE:nvim_bin>' 'COMMAND ${pkgs.stdenv.hostPlatform.emulator pkgs.buildPackages} $<TARGET_FILE:nvim_bin>'
+        '';
       });
+    in pkgs.wrapNeovimUnstable
+      neovim-unwrapped'
+      # XXX(2024/05/13): manifestRc must be null for cross-compilation to work.
+      #   wrapper invokes `neovim` with all plugins enabled at build time i guess to generate caches and stuff?
+      #   alternative is to emulate `nvim-wrapper` during build.
+      ((pkgs.neovimUtils.makeNeovimConfig configArgs) // { manifestRc = null; })
+    ;
 
     # private because there could be sensitive things in the swap
     persist.byStore.private = [ ".cache/vim-swap" ];

hosts/common/programs/networkmanager.nix

@@ -0,0 +1,107 @@
+# Network Manager:
+# i manage this myself because the nixos service is not flexible enough.
+# - it unconditionally puts modemmanager onto the system path, preventing me from patching modemmanager's service file (without an overlay).
+#
+# XXX: it's normal to see error messages on an ethernet-only host, even when using nixos' official networkmanager service:
+# - `Couldn't initialize supplicant interface: Failed to D-Bus activate wpa_supplicant service`
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.sane.programs.networkmanager;
+in
+{
+  sane.programs.networkmanager = {
+    suggestedPrograms = [ "wpa_supplicant" ];
+    enableFor.system = lib.mkIf (builtins.any (en: en) (builtins.attrValues cfg.enableFor.user)) true;
+  };
+
+  # add to systemd.packages so we get the service file it ships, then override what we need to customize (taken from nixpkgs)
+  systemd.packages = lib.mkIf cfg.enabled [ cfg.package ];
+  systemd.services.NetworkManager = lib.mkIf cfg.enabled {
+    wantedBy = [ "network.target" ];
+    aliases = [ "dbus-org.freedesktop.NetworkManager.service" ];
+
+    serviceConfig = {
+      StateDirectory = "NetworkManager";
+      StateDirectoryMode = 755; # not sure if this really needs to be 755
+    };
+  };
+
+  systemd.services.NetworkManager-wait-online = lib.mkIf cfg.enabled {
+    wantedBy = [ "network-online.target" ];
+  };
+
+  systemd.services.NetworkManager-dispatcher = lib.mkIf cfg.enabled {
+    wantedBy = [ "NetworkManager.service" ];
+    # to debug, add NM_DISPATCHER_DEBUG_LOG=1
+    serviceConfig.ExecStart = [
+      ""  # first blank line is to clear the upstream `ExecStart` field.
+      "${cfg.package}/libexec/nm-dispatcher --persist"  # --persist is needed for it to actually run as a daemon
+    ];
+    serviceConfig.Restart = "always";
+    serviceConfig.RestartSec = "1s";
+  };
+
+  environment.etc = lib.mkIf cfg.enabled {
+    "NetworkManager/system-connections".source = "/var/lib/NetworkManager/system-connections";
+    "NetworkManager/NetworkManager.conf".text = ''
+      [device]
+      # wifi.backend: wpa_supplicant or iwd
+      wifi.backend=wpa_supplicant
+      wifi.scan-rand-mac-address=true
+
+      [logging]
+      audit=false
+      # level: TRACE, DEBUG, INFO, WARN, ERR, OFF
+      level=INFO
+      # domain=...
+
+      [main]
+      # dhcp:
+      # - `internal` (default)
+      # - `dhclient` (requires dhclient to be installed)
+      # - `dhcpcd`   (requires dhcpcd to be installed)
+      dhcp=internal
+      # dns:
+      # - `default`: update /etc/resolv.conf with nameservers provided by the active connection
+      # - `none`: NM won't update /etc/resolv.conf
+      # - `systemd-resolved`: push DNS config to systemd-resolved
+      # - `dnsmasq`: run a local caching nameserver
+      dns=${if config.services.resolved.enable then
+        "systemd-resolved"
+      else if config.sane.services.trust-dns.enable && config.sane.services.trust-dns.asSystemResolver then
+        "none"
+      else
+        "internal"
+      }
+      plugins=keyfile
+      # rc-manager: how NM should write to /etc/resolv.conf
+      # - regardless of this setting, NM will write /var/lib/NetworkManager/resolv.conf
+      rc-manager=unmanaged
+      # systemd-resolved: send DNS config to systemd-resolved?
+      # this setting has no effect if dns="systemd-resolved"; it's supplementary, not absolute.
+      systemd-resolved=false
+      # debug=...  (see also: NM_DEBUG env var)
+    '';
+  };
+  hardware.wirelessRegulatoryDatabase = lib.mkIf cfg.enabled true;
+  networking.useDHCP = lib.mkIf cfg.enabled false;
+  users.groups = lib.mkIf cfg.enabled {
+    networkmanager.gid = config.ids.gids.networkmanager;
+  };
+  services.udev.packages = lib.mkIf cfg.enabled [ cfg.package ];
+  security.polkit.enable = lib.mkIf cfg.enabled true;
+  security.polkit.extraConfig = ''
+    polkit.addRule(function(action, subject) {
+      if (
+        subject.isInGroup("networkmanager")
+        && (action.id.indexOf("org.freedesktop.NetworkManager.") == 0
+            || action.id.indexOf("org.freedesktop.ModemManager")  == 0
+        ))
+          { return polkit.Result.YES; }
+    });
+  '';
+
+  boot.kernelModules = [ "ctr" ];  #< TODO: needed (what even is this)?
+  # TODO: polkit?
+  # TODO: NetworkManager-ensure-profiles?
+}

hosts/common/programs/newsflash.nix

@@ -13,7 +13,7 @@ let
   wanted-feeds = feeds.filterByFormat [ "text" "image" "podcast" "video" ] all-feeds;
 in {
   sane.programs.newsflash = {
-    slowToBuild = true;  # mainly for desktop: webkitgtk-6.0
+    buildCost = 2;  # mainly for desktop: webkitgtk-6.0
     persist.byStore.plaintext = [ ".local/share/news-flash" ];
     fs.".config/newsflashFeeds.opml".symlink.text =
       feeds.feedsToOpml wanted-feeds