try to add Kaiteki as a package

requires updating dart (flutter), which is causing problems...

.sops.yaml

@@ -1,47 +0,0 @@
-keys:
-  - &user_desko_colin age1tnl4jfgacwkargzeqnhzernw29xx8mkv73xh6ufdyde6q7859slsnzf24x
-  - &user_lappy_colin age1j2pqnl8j0krdzk6npe93s4nnqrzwx978qrc0u570gzlamqpnje9sc8le2g
-  - &user_servo_colin age1z8fauff34cdecr6sjkre260luzxcca05kpcwvhx988d306tpcejsp63znu
-  - &user_moby_colin age1zsrsvd7j6l62fjxpfd2qnhqlk8wk4p8r0dtxpe4sdgnh2474095qdu7xj9
-  - &host_desko age1vnw7lnfpdpjn62l3u5nyv5xt2c965k96p98kc43mcnyzpetrts9q54mc9v
-  - &host_lappy age1w7mectcjku6x3sd8plm8wkn2qfrhv9n6zhzlf329e2r2uycgke8qkf9dyn
-  - &host_servo age1tzlyex2z6t88tg9h82943e39shxhmqeyr7ywhlwpdjmyqsndv3qq27x0rf
-  - &host_moby age18vq5ktwgeaysucvw9t67drqmg5zd5c5k3le34yqxckkfj7wqdqgsd4ejmt
-creation_rules:
-  - path_regex: secrets/universal*
-    key_groups:
-    - age:
-      - *user_desko_colin
-      - *user_lappy_colin
-      - *user_servo_colin
-      - *user_moby_colin
-      - *host_desko
-      - *host_lappy
-      - *host_servo
-      - *host_moby
-  - path_regex: secrets/servo*
-    key_groups:
-    - age:
-      - *user_desko_colin
-      - *user_lappy_colin
-      - *user_servo_colin
-      - *host_servo
-  - path_regex: secrets/desko.yaml$
-    key_groups:
-    - age:
-      - *user_desko_colin
-      - *user_lappy_colin
-      - *host_desko
-  - path_regex: secrets/lappy.yaml$
-    key_groups:
-    - age:
-      - *user_lappy_colin
-      - *user_desko_colin
-      - *host_lappy
-  - path_regex: secrets/moby.yaml$
-    key_groups:
-    - age:
-      - *user_desko_colin
-      - *user_lappy_colin
-      - *user_moby_colin
-      - *host_moby

TODO.md

@@ -0,0 +1,21 @@
+# features/tweaks
+- enable sshfs (deskto/lappy)
+- set firefox default search engine
+- iron out video drivers
+
+# cleanup
+- remove helpers from outputs section (use `let .. in`)
+
+
+# speed up cross compiling
+   https://nixos.wiki/wiki/Cross_Compiling
+   https://nixos.wiki/wiki/NixOS_on_ARM
+   overlays = [{ ... }: {
+     nixpkgs.crossSystem.system = "aarch64-linux";
+   }];
+
+# better secrets management? read:
+- decrypted at activation time: https://github.com/Mic92/sops-nix
+less promising:
+- https://christine.website/blog/nixos-encrypted-secrets-2021-01-20
+- git-crypt (https://github.com/bobbbay/dotfiles.git)

configuration.nix

@@ -0,0 +1,25 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+# USEFUL COMMANDS:
+#   nix show-config
+#   nix eval --raw <expr>  => print an expression. e.g. nixpkgs.raspberrypifw prints store path to the package
+#   nix-option   ##  query options -- including their SET VALUE; similar to search: https://search.nixos.org/options
+#   nixos-rebuild switch --upgrade   ## pull changes from the nixos channel (e.g. security updates) and rebuild
+
+{ config, pkgs, ... }:
+
+{
+
+  # enable flake support.
+  # the real config root lives in flake.nix
+  nix = {
+    #package = pkgs.nixFlakes;
+    package = pkgs.nixUnstable;
+    extraOptions = ''
+      experimental-features = nix-command flakes
+    '';
+  };
+}
+

flake.lock

@@ -1,20 +1,5 @@
 {
   "nodes": {
-    "flake-utils": {
-      "locked": {
-        "lastModified": 1659877975,
-        "narHash": "sha256-zllb8aq3YO3h8B/U0/J1WBgAL8EX5yWf5pMj3G0NAmc=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "c0e246b9b83f637f4681389ecabcb2681b4f3af0",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
-      }
-    },
     "home-manager": {
       "inputs": {
         "nixpkgs": [
@@ -22,11 +7,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1667907331,
+        "lastModified": 1654113405,
-        "narHash": "sha256-bHkAwkYlBjkupPUFcQjimNS8gxWSWjOTevEuwdnp5m0=",
+        "narHash": "sha256-VpK+0QaWG2JRgB00lw77N9TjkE3ec0iMYIX1TzGpxa4=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "6639e3a837fc5deb6f99554072789724997bc8e5",
+        "rev": "ac2287df5a2d6f0a44bbcbd11701dbbf6ec43675",
         "type": "github"
       },
       "original": {
@@ -39,11 +24,11 @@
     "mobile-nixos": {
       "flake": false,
       "locked": {
-        "lastModified": 1670131242,
+        "lastModified": 1654281294,
-        "narHash": "sha256-T/o1/3gffr010fsqgNshs1NJJjsnUYvQnUZgm6hilsY=",
+        "narHash": "sha256-hT2/u0jUOD4TFU6YyYt+5Gt+hjIeerLTyZG7ru79aDU=",
         "owner": "nixos",
         "repo": "mobile-nixos",
-        "rev": "5ee45cc1f8e43f4af14ee17ccef9156b0db8cd77",
+        "rev": "d798b0b34240b18a08c22f5c0ee1f59a3ce43c01",
         "type": "github"
       },
       "original": {
@@ -53,119 +38,41 @@
       }
     },
     "nixpkgs": {
-      "inputs": {
-        "nixpkgs": [
-          "nixpkgs-unpatched"
-        ]
-      },
       "locked": {
-        "lastModified": 1,
+        "lastModified": 1654275867,
-        "narHash": "sha256-RM4ZprjMlUTMD0huOPQceF0ujXG2xk7LE1fGXfcg71g=",
+        "narHash": "sha256-pt14ZE4jVPGvfB2NynGsl34pgXfOqum5YJNpDK4+b9E=",
-        "path": "nixpatches",
-        "type": "path"
-      },
-      "original": {
-        "path": "nixpatches",
-        "type": "path"
-      }
-    },
-    "nixpkgs-stable": {
-      "locked": {
-        "lastModified": 1673527292,
-        "narHash": "sha256-903EpRSDCfUvic7Hsiqwy+h7zlMTLAUbCXkEGGriCfM=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "6a3f9996408c970b99b8b992b11bb249d1455b62",
+        "rev": "7a20c208aacf4964c19186dcad51f89165dc7ed0",
         "type": "github"
       },
       "original": {
         "id": "nixpkgs",
-        "ref": "nixos-22.11",
+        "ref": "nixos-22.05",
         "type": "indirect"
       }
     },
-    "nixpkgs-stable_2": {
+    "nurpkgs": {
       "locked": {
-        "lastModified": 1673100377,
+        "lastModified": 1654367137,
-        "narHash": "sha256-mT76pTd0YFxT6CwtPhDgHJhuIgLY+ZLSMiQpBufwMG4=",
+        "narHash": "sha256-xufB/+qvk/7rh7qrwZbzru1kTu8nsmNWBNQkYbdS84Q=",
-        "owner": "NixOS",
+        "owner": "nix-community",
-        "repo": "nixpkgs",
+        "repo": "NUR",
-        "rev": "9f11a2df77cb945c115ae2a65f53f38121597d73",
+        "rev": "86ff2d098bce1d623232f4886027a1d61317b195",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
+        "owner": "nix-community",
-        "ref": "release-22.11",
+        "repo": "NUR",
-        "repo": "nixpkgs",
         "type": "github"
       }
     },
-    "nixpkgs-unpatched": {
-      "locked": {
-        "lastModified": 1673450908,
-        "narHash": "sha256-b8em+kwrNtnB7gR8SyVf6WuTyQ+6tHS6dzt9D9wgKF0=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "6c8644fc37b6e141cbfa6c7dc8d98846c4ff0c2e",
-        "type": "github"
-      },
-      "original": {
-        "id": "nixpkgs",
-        "ref": "nixos-unstable",
-        "type": "indirect"
-      }
-    },
     "root": {
       "inputs": {
         "home-manager": "home-manager",
         "mobile-nixos": "mobile-nixos",
         "nixpkgs": "nixpkgs",
-        "nixpkgs-stable": "nixpkgs-stable",
+        "nurpkgs": "nurpkgs"
-        "nixpkgs-unpatched": "nixpkgs-unpatched",
-        "sops-nix": "sops-nix",
-        "uninsane-dot-org": "uninsane-dot-org"
-      }
-    },
-    "sops-nix": {
-      "inputs": {
-        "nixpkgs": [
-          "nixpkgs"
-        ],
-        "nixpkgs-stable": "nixpkgs-stable_2"
-      },
-      "locked": {
-        "lastModified": 1673481602,
-        "narHash": "sha256-P80X38fOM2MtoYdgkyuksGOQPDhIhNJW2W2jMeMIZzE=",
-        "owner": "Mic92",
-        "repo": "sops-nix",
-        "rev": "32187b33ac6ec9b628dcd08dd941a715e6241dda",
-        "type": "github"
-      },
-      "original": {
-        "owner": "Mic92",
-        "repo": "sops-nix",
-        "type": "github"
-      }
-    },
-    "uninsane-dot-org": {
-      "inputs": {
-        "flake-utils": "flake-utils",
-        "nixpkgs": [
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1666870107,
-        "narHash": "sha256-b9eXZxSwhzdJI5uQgfrMhu4SY2POrPkinUg7F5gQVYo=",
-        "ref": "refs/heads/master",
-        "rev": "80c6ec95bd430e29d231cf745f19279bb76fb382",
-        "revCount": 164,
-        "type": "git",
-        "url": "https://git.uninsane.org/colin/uninsane"
-      },
-      "original": {
-        "type": "git",
-        "url": "https://git.uninsane.org/colin/uninsane"
       }
     }
   },

flake.nix

@@ -1,15 +1,11 @@
 # docs:
-# - <https://nixos.wiki/wiki/Flakes>
+#   https://nixos.wiki/wiki/Flakes
-# - <https://serokell.io/blog/practical-nix-flakes>
+#   https://serokell.io/blog/practical-nix-flakes
 
 {
   inputs = {
-    nixpkgs-stable.url = "nixpkgs/nixos-22.11";
+    nixpkgs.url = "nixpkgs/nixos-22.05";
-    nixpkgs-unpatched.url = "nixpkgs/nixos-unstable";
+    # pkgs-telegram.url = "nixpkgs/33775ec9a2173a08e46edf9f46c9febadbf743e8";# 2022/04/18; telegram 3.7.3. fails: nix log /nix/store/y5kv47hnv55qknb6cnmpcyraicay79fx-telegram-desktop-3.7.3.drv: g++: fatal error: cannot execute '/nix/store/njk5sbd21305bhr7gwibxbbvgbx5lxvn-gcc-9.3.0/libexec/gcc/aarch64-unknown-linux-gnu/9.3.0/cc1plus': execv: No such file or directory
-    nixpkgs = {
-      url = "path:nixpatches";
-      inputs.nixpkgs.follows = "nixpkgs-unpatched";
-    };
     mobile-nixos = {
       url = "github:nixos/mobile-nixos";
       flake = false;
@@ -18,149 +14,103 @@
       url = "github:nix-community/home-manager/release-22.05";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    sops-nix = {
+    nurpkgs.url = "github:nix-community/NUR";
-      url = "github:Mic92/sops-nix";
-      inputs.nixpkgs.follows = "nixpkgs";
-    };
-    uninsane-dot-org = {
-      url = "git+https://git.uninsane.org/colin/uninsane";
-      inputs.nixpkgs.follows = "nixpkgs";
-    };
   };
 
-  outputs = {
+  outputs = { self, nixpkgs, mobile-nixos, home-manager, nurpkgs }: {
-    self,
+    machines.uninsane = self.decl-bootable-machine { name = "uninsane"; system = "aarch64-linux"; };
-    nixpkgs,
+    machines.desko = self.decl-bootable-machine { name = "desko"; system = "x86_64-linux"; };
-    nixpkgs-stable,
+    machines.lappy = self.decl-bootable-machine { name = "lappy"; system = "x86_64-linux"; };
-    nixpkgs-unpatched,
-    mobile-nixos,
-    home-manager,
-    sops-nix,
-    uninsane-dot-org
-  }:
-    let
-      nixpkgsCompiledBy = local: nixpkgs.legacyPackages."${local}";
 
-      evalHost = { name, local, target }:
+    machines.moby =
-        let
+      let machine = self.decl-machine {
-          # XXX: we'd prefer to use `nixosSystem = (nixpkgsCompiledBy local).nixos`
+        name = "moby";
-          # but it doesn't propagate config to the underlying pkgs, meaning it doesn't let you use
+        system = "aarch64-linux";
-          # non-free packages even after setting nixpkgs.allowUnfree.
+        extraModules = [
-          nixosSystem = import ((nixpkgsCompiledBy local).path + "/nixos/lib/eval-config.nix");
+          (import "${mobile-nixos}/lib/configuration.nix" {
-        in
+            device = "pine64-pinephone";
-          (nixosSystem {
+          })
-            # we use pkgs built for and *by* the target, i.e. emulation, by default.
+        ];
-            # cross compilation only happens on explicit access to `pkgs.cross`
+      };
-            system = target;
+      in {
-            modules = [
+        nixosConfiguration = machine;
-              (import ./hosts/instantiate.nix { localSystem = local; hostName = name; })
+        img = machine.config.mobile.outputs.u-boot.disk-image;
-              self.nixosModules.default
-              self.nixosModules.passthru
-              {
-                nixpkgs.overlays = [
-                  self.overlays.default
-                  self.overlays.passthru
-                ];
-              }
-            ];
-          });
-    in {
-      nixosConfigurations = {
-        servo = evalHost { name = "servo"; local = "x86_64-linux"; target = "x86_64-linux"; };
-        desko = evalHost { name = "desko"; local = "x86_64-linux"; target = "x86_64-linux"; };
-        lappy = evalHost { name = "lappy"; local = "x86_64-linux"; target = "x86_64-linux"; };
-        moby = evalHost { name = "moby"; local = "aarch64-linux"; target = "aarch64-linux"; };
-        # special cross-compiled variant, to speed up deploys from an x86 box to the arm target
-        # note that these *do* produce different store paths, because the closure for the tools used to cross compile
-        # v.s. emulate differ.
-        # so deploying foo-cross and then foo incurs some rebuilding.
-        moby-cross = evalHost { name = "moby"; local = "x86_64-linux"; target = "aarch64-linux"; };
-        rescue = evalHost { name = "rescue"; local = "x86_64-linux"; target = "x86_64-linux"; };
       };
 
-      # unofficial output
+    nixosConfigurations = builtins.mapAttrs (name: value: value.nixosConfiguration) self.machines;
-      # this produces a EFI-bootable .img file (GPT with a /boot partition and a system (/ or /nix) partition).
+    imgs = builtins.mapAttrs (name: value: value.img) self.machines;
-      # after building this:
-      #   - flash it to a bootable medium (SD card, flash drive, HDD)
-      #   - resize the root partition (use cfdisk)
-      #   - mount the part
-      #      - chown root:nixbld <part>/nix/store
-      #      - chown root:root -R <part>/nix/store/*
-      #      - chown root:root -R <part>/persist  # if using impermanence
-      #      - populate any important things (persist/, home/colin/.ssh, etc)
-      #   - boot
-      #   - if fs wasn't resized automatically, then `sudo btrfs filesystem resize max /`
-      #   - checkout this flake into /etc/nixos AND UPDATE THE FS UUIDS.
-      #   - `nixos-rebuild --flake './#<host>' switch`
-      imgs = builtins.mapAttrs (_: host-dfn: host-dfn.config.system.build.img) self.nixosConfigurations;
 
-      overlays = rec {
+    decl-machine = { name, system, extraModules ? [], basePkgs ? nixpkgs }: let
-        default = pkgs;
+      patchedPkgs = basePkgs.legacyPackages.${system}.applyPatches {
-        pkgs = import ./pkgs/overlay.nix;
+        name = "nixpkgs-patched-uninsane";
-        passthru =
+        src = basePkgs;
-          let
+        patches = [
-            stable = next: prev: {
+          # for mobile: allow phoc to scale to non-integer values
-              stable = nixpkgs-stable.legacyPackages."${prev.stdenv.hostPlatform}";
+          ./nixpatches/01-phosh-float-scale.patch
-            };
+          # for raspberry pi: allow building u-boot for rpi 4{,00}
-            mobile = (import "${mobile-nixos}/overlay/overlay.nix");
+          ./nixpatches/02-rpi4-uboot.patch
-            uninsane = uninsane-dot-org.overlay;
+          ./nixpatches/03-whalebird-4.6.0.patch
-          in
+          ./nixpatches/04-dart-2.7.0.patch
-            next: prev:
+        ];
-              (stable next prev) // (mobile next prev) // (uninsane next prev);
       };
+      nixosSystem = import (patchedPkgs + "/nixos/lib/eval-config.nix");
+      in (nixosSystem {
+        inherit system;
+        specialArgs = { inherit home-manager; inherit nurpkgs; secrets = import ./secrets/default.nix; };
+        modules = [
+          ./configuration.nix
+          ./machines/${name}
+          (import ./helpers/set-hostname.nix name)
+          (self.overlaysModule system)
+        ] ++ extraModules;
+    });
 
-      nixosModules = rec {
+    # this produces a EFI-bootable .img file (GPT with / and /boot).
-        default = sane;
+    # after building this, steps are:
-        sane = import ./modules;
+    #   run `btrfs-convert --uuid copy <device>`
-        passthru = { ... }: {
+    #   boot, checkout this flake into /etc/nixos AND UPDATE THE UUIDS IT REFERENCES.
-          imports = [
+    #   then `nixos-rebuild ...`
-            home-manager.nixosModule
+    decl-img = { name, system, extraModules ? [] }: (
-            sops-nix.nixosModules.sops
+      (self.decl-machine { inherit name; inherit system; extraModules = extraModules ++ [./image.nix]; })
-          ];
+        .config.system.build.raw
-        };
+    );
-      };
 
-      # this includes both our native packages and all the nixpkgs packages.
+    decl-bootable-machine = { name, system }: {
-      legacyPackages =
+      nixosConfiguration = self.decl-machine { inherit name; inherit system; };
-        let
+      img = self.decl-img { inherit name; inherit system; };
-          allPkgsFor = sys: (nixpkgsCompiledBy sys).appendOverlays [
-            self.overlays.passthru self.overlays.pkgs
-          ];
-        in {
-          x86_64-linux = allPkgsFor "x86_64-linux";
-          aarch64-linux = allPkgsFor "aarch64-linux";
-        };
-
-      # extract only our own packages from the full set
-      packages = builtins.mapAttrs
-        (_: full: full.sane // { inherit (full) sane uninsane-dot-org; })
-        self.legacyPackages;
-
-      apps."x86_64-linux" =
-        let
-          pkgs = self.legacyPackages."x86_64-linux";
-        in {
-          update-feeds = {
-            type = "app";
-            program = "${pkgs.feeds.passthru.updateScript}";
-          };
-
-          init-feed = {
-            type = "app";
-            program = "${pkgs.feeds.passthru.initFeedScript}";
-          };
-        };
-
-      templates = {
-        python-data = {
-          # initialize with:
-          # - `nix flake init -t '/home/colin/dev/nixos/#python-data'`
-          # then enter with:
-          # - `nix develop`
-          path = ./templates/python-data;
-          description = "python environment for data processing";
-        };
-      };
     };
+
+    overlaysModule = system: { config, pkgs, ...}: {
+      nixpkgs.config.allowUnfree = true;
+
+      nixpkgs.overlays = [
+        #mobile-nixos.overlay
+        nurpkgs.overlay
+        (next: prev: {
+          #### customized packages
+          # nixos-unstable pleroma is too far out-of-date for our db
+          pleroma = prev.callPackage ./pkgs/pleroma { };
+          # jackett doesn't allow customization of the bind address: this will probably always be here.
+          jackett = next.callPackage ./pkgs/jackett { pkgs = prev; };
+          # fix abrupt HDD poweroffs as during reboot. patching systemd requires rebuilding nearly every package.
+          # systemd = import ./pkgs/systemd { pkgs = prev; };
+
+          # patch rpi uboot with something that fixes USB HDD boot
+          ubootRaspberryPi4_64bit = next.callPackage ./pkgs/ubootRaspberryPi4_64bit { pkgs = prev; };
+
+          #### TEMPORARY NIXOS-UNSTABLE PACKAGES
+
+          # stable telegram doesn't build, so explicitly use the stable one.
+          # TODO: apply this specifically to the moby build?
+          # tdesktop = pkgs-telegram.legacyPackages.${system}.tdesktop;
+          tdesktop = nixpkgs.legacyPackages.${system}.tdesktop;
+
+          #### TEMPORARY: PACKAGES WAITING TO BE UPSTREAMED
+          whalebird = prev.callPackage ./pkgs/whalebird { };
+          kaiteki = prev.callPackage ./pkgs/kaiteki { };
+        })
+      ];
+    };
+  };
 }
 

helpers/gui/gnome.nix

@@ -0,0 +1,13 @@
+{ config, pkgs, lib, ... }:
+
+{
+  # start gnome/gdm on boot
+  services.xserver.enable = true;
+  services.xserver.desktopManager.gnome.enable = true;
+  services.xserver.displayManager.gdm.enable = true;
+
+  # gnome does networking stuff with networkmanager
+  networking.useDHCP = false;
+  networking.networkmanager.enable = true;
+  networking.wireless.enable = lib.mkForce false;
+}

helpers/gui/i3.nix

@@ -0,0 +1,16 @@
+{ pkgs, ... }:
+{
+  environment.pathsToLink = [ "/libexec" ];  # patch for i3blocks to work
+  services.xserver.enable = true;
+  services.xserver.displayManager.defaultSession = "none+i3";
+  services.xserver.windowManager.i3 = {
+    enable = true;
+    extraPackages = with pkgs; [
+      dmenu
+      i3status
+      i3lock
+      i3blocks
+    ];
+  };
+}
+

helpers/gui/phosh.nix

@@ -0,0 +1,21 @@
+{ ... }:
+{
+  # docs: https://github.com/NixOS/nixpkgs/blob/nixos-22.05/nixos/modules/services/x11/desktop-managers/phosh.nix
+  services.xserver.desktopManager.phosh = {
+    enable = true;
+    user = "colin";
+    group = "users";
+    phocConfig = {
+      xwayland = "true";
+      # find default outputs by catting /etc/phosh/phoc.ini
+      outputs.DSI-1 = {
+        scale = 1.5;
+      };
+    };
+  };
+
+  environment.variables = {
+    # Qt apps won't always start unless this env var is set
+    QT_QPA_PLATFORM = "wayland";
+  };
+}

helpers/gui/plasma-mobile.nix

@@ -0,0 +1,14 @@
+{ config, pkgs, lib, ... }:
+ 
+{
+  # start plasma-mobile on boot
+  services.xserver.enable = true;
+  services.xserver.desktopManager.plasma5.mobile.enable = true;
+  services.xserver.desktopManager.plasma5.mobile.installRecommendedSoftware = false;  # not all plasma5-mobile packages build for aarch64
+  services.xserver.displayManager.sddm.enable = true;
+ 
+  # Plasma does networking stuff with networkmanager, but nix configures the defaults itself
+  # networking.useDHCP = false;
+  # networking.networkmanager.enable = true;
+  # networking.wireless.enable = lib.mkForce false;
+}

helpers/gui/sway.nix

@@ -0,0 +1,31 @@
+{ pkgs, ... }:
+ 
+# docs: https://nixos.wiki/wiki/Sway
+{
+  programs.sway = {
+    # we configure sway with home-manager, but this enable gets us e.g. opengl and fonts
+    enable = true;
+  };
+
+  # TODO: should be able to use SDDM to get interactive login
+  services.greetd = {
+    enable = true;
+    settings = rec {
+      initial_session = {
+        command = "${pkgs.sway}/bin/sway";
+        user = "colin";
+      };
+      default_session = initial_session;
+    };
+  };
+
+  # unlike other DEs, sway configures no audio stack
+  # administer with pw-cli, pw-mon, pw-top commands
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;  # ??
+    pulse.enable = true;
+  };
+}
+

helpers/hardware-x86_64.nix

@@ -0,0 +1,65 @@
+{ config, pkgs, lib, ... }:
+
+{
+  boot.initrd.availableKernelModules = [
+    "xhci_pci" "ahci" "sd_mod" "sdhci_pci"  # nixos-generate-config defaults
+    "usb_storage"   # rpi needed this to boot from usb storage, i think.
+    # "usbhid" "hid-generic"  # hopefully these will fix USB HID auto-sleep ?
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.initrd.supportedFilesystems = [ "ext4" "btrfs" "ext2" "ext3" "vfat" ];
+  # find more of these with sensors-detect
+  boot.kernelModules = [
+    "coretemp"
+    "kvm-intel"
+    "kvm-amd"  # desktop
+    "amdgpu"   # desktop
+  ];
+  boot.extraModulePackages = [ ];
+  boot.kernelParams = [ "boot.shell_on_fail" ];
+  boot.consoleLogLevel = 7;
+
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.systemd-boot.configurationLimit = 40;  # keep this many generations
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  # enable cross compilation
+  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
+  # nixpkgs.crossSystem.system = "aarch64-linux";
+
+  powerManagement.cpuFreqGovernor = "powersave";
+  hardware.enableRedistributableFirmware = true;
+  hardware.cpu.amd.updateMicrocode = true;    # desktop
+  hardware.cpu.intel.updateMicrocode = true;  # laptop
+  services.fwupd.enable = true;
+  # powertop will default to putting USB devices -- including HID -- to sleep after TWO SECONDS
+  powerManagement.powertop.enable = false;
+
+  hardware.opengl.extraPackages = [
+    # laptop
+    pkgs.intel-compute-runtime
+    pkgs.intel-media-driver  # new
+    pkgs.libvdpau-va-gl      # new
+    pkgs.vaapiIntel
+    # desktop
+    pkgs.rocm-opencl-icd
+    pkgs.rocm-opencl-runtime
+  ];
+  hardware.opengl.driSupport = true;
+  # For 32 bit applications
+  hardware.opengl.driSupport32Bit = true;
+
+  # TODO colin: does this *do* anything?
+  swapDevices = [ ];
+
+  # services.snapper.configs = {
+  #   root = {
+  #     subvolume = "/";
+  #     extraConfig = {
+  #       ALLOW_USERS = "colin";
+  #     };
+  #   };
+  # };
+  # services.snapper.snapshotInterval = "daily";
+}

helpers/home-manager-gen-colin.nix

@@ -0,0 +1,532 @@
+# docs:
+#   https://rycee.gitlab.io/home-manager/
+#   https://rycee.gitlab.io/home-manager/options.html
+#   man home-configuration.nix
+#
+
+# system is e.g. x86_64-linux
+# gui is "gnome", or null
+{ lib, pkgs, system, gui, extraPackages ? [] }: {
+  home.stateVersion = "21.11";
+  home.username = "colin";
+  home.homeDirectory = "/home/colin";
+  programs.home-manager.enable = true;  # this lets home-manager manage dot-files in user dirs, i think
+
+  # XDG defines things like ~/Desktop, ~/Downloads, etc.
+  # these clutter the home, so i mostly don't use them.
+  xdg.userDirs = {
+    enable = true;
+    createDirectories = false;  # on headless systems, most xdg dirs are noise
+    desktop = "$HOME/.xdg/Desktop";
+    documents = "$HOME/src";
+    download = "$HOME/tmp";
+    music = "$HOME/Music";
+    pictures = "$HOME/Pictures";
+    publicShare = "$HOME/.xdg/Public";
+    templates = "$HOME/.xdg/Templates";
+    videos = "$HOME/Videos";
+  };
+
+  programs.zsh = {
+    enable = true;
+    enableSyntaxHighlighting = true;
+    enableVteIntegration = true;
+    dotDir = ".config/zsh";
+
+    initExtraBeforeCompInit = ''
+      # p10k instant prompt
+      # run p10k configure to configure, but it can't write out its file :-(
+      POWERLEVEL9K_DISABLE_CONFIGURATION_WIZARD=true
+    '';
+
+    # prezto = oh-my-zsh fork; controls prompt, auto-completion, etc.
+    # see: https://github.com/sorin-ionescu/prezto
+    prezto = {
+      enable = true;
+      pmodules = [
+        "environment"
+        "terminal"
+        "editor"
+        "history"
+        "directory"
+        "spectrum"
+        "utility"
+        "completion"
+        "prompt"
+        "git"
+      ];
+      prompt = {
+        theme = "powerlevel10k";
+      };
+    };
+  };
+  programs.kitty.enable = true;
+  programs.git = {
+    enable = true;
+    userName = "colin";
+    userEmail = "colin@uninsane.org";
+  };
+
+  programs.vim = {
+    enable = true;
+    extraConfig = ''
+      " wtf vim project: NOBODY LIKES MOUSE FOR VISUAL MODE
+      set mouse-=a
+      " copy/paste to system clipboard
+      set clipboard=unnamedplus
+      " <tab> completion menu settings
+      set wildmenu
+      set wildmode=longest,list,full
+      " highlight all matching searches (using / and ?)
+      set hlsearch
+      " allow backspace to delete empty lines in insert mode
+      set backspace=indent,eol,start
+      " built-in syntax highlighting
+      syntax enable
+      " show line/col number in bottom right
+      set ruler
+      " highlight trailing space & related syntax errors (does this work?)
+      let c_space_errors=1
+      let python_space_errors=1
+    '';
+  };
+
+  # obtain these by running `dconf dump /` after manually customizing gnome
+  # TODO: fix "is not of type `GVariant value'"
+  # dconf.settings = lib.mkIf (gui == "gnome") {
+  #   gnome = {
+  #     # control alt-tab behavior
+  #     "org/gnome/desktop/wm/keybindings" = {
+  #       switch-applications = [ "<Super>Tab" ];
+  #       switch-applications-backward=[];
+  #       switch-windows=["<Alt>Tab"];
+  #       switch-windows-backward=["<Super><Alt>Tab"];
+  #     };
+  #     # idle power savings
+  #     "org/gnome/settings-deamon/plugins/power" = {
+  #       idle-brigthness = 50;
+  #       sleep-inactive-ac-type = "nothing";
+  #       sleep-inactive-battery-timeout = 5400;  # seconds
+  #     };
+  #     "org/gnome/shell" = {
+  #       favorite-apps = [
+  #         "org.gnome.Nautilus.desktop"
+  #         "firefox.desktop"
+  #         "kitty.desktop"
+  #         # "org.gnome.Terminal.desktop"
+  #       ];
+  #     };
+  #     "org/gnome/desktop/session" = {
+  #       # how long until considering a session idle (triggers e.g. screen blanking)
+  #       idle-delay = 900;
+  #     };
+  #     "org/gnome/desktop/interface" = {
+  #       text-scaling-factor = 1.25;
+  #     };
+  #     "org/gnome/desktop/media-handling" = {
+  #       # don't auto-mount inserted media
+  #       automount = false;
+  #       automount-open = false;
+  #     };
+  #   };
+  # };
+
+  # home.pointerCursor = {
+  #   package = pkgs.vanilla-dmz;
+  #   name = "Vanilla-DMZ";
+  # };
+
+  # taken from https://github.com/srid/nix-config/blob/705a70c094da53aa50cf560179b973529617eb31/nix/home/i3.nix
+  xsession.windowManager.i3 = lib.mkIf (gui == "i3") (
+  let
+    mod = "Mod4";
+  in {
+    enable = true;
+    config = {
+      modifier = mod;
+
+      fonts = {
+        names = [ "DejaVu Sans Mono" ];
+        style = "Bold Semi-Condensed";
+        size = 11.0;
+      };
+
+      # terminal = "kitty";
+      # terminal = "${pkgs.kitty}/bin/kitty";
+
+      keybindings = {
+        "${mod}+Return" = "exec ${pkgs.kitty}/bin/kitty";
+        "${mod}+p" = "exec ${pkgs.dmenu}/bin/dmenu_run";
+        "${mod}+x" = "exec sh -c '${pkgs.maim}/bin/maim -s | xclip -selection clipboard -t image/png'";
+        "${mod}+Shift+x" = "exec sh -c '${pkgs.i3lock}/bin/i3lock -c 222222 & sleep 5 && xset dpms force of'";
+
+        # Focus
+        "${mod}+j" = "focus left";
+        "${mod}+k" = "focus down";
+        "${mod}+l" = "focus up";
+        "${mod}+semicolon" = "focus right";
+
+        # Move
+        "${mod}+Shift+j" = "move left";
+        "${mod}+Shift+k" = "move down";
+        "${mod}+Shift+l" = "move up";
+        "${mod}+Shift+semicolon" = "move right";
+
+        # multi monitor setup
+        # "${mod}+m" = "move workspace to output DP-2";
+        # "${mod}+Shift+m" = "move workspace to output DP-5";
+      };
+
+      # bars = [
+      #   {
+      #     position = "bottom";
+      #     statusCommand = "${pkgs.i3status-rust}/bin/i3status-rs ${./i3status-rust.toml}";
+      #   }
+      # ];
+    };
+  });
+
+  wayland.windowManager.sway = lib.mkIf (gui == "sway") {
+    enable = true;
+    wrapperFeatures.gtk = true;
+    config = rec {
+      terminal = "${pkgs.kitty}/bin/kitty";
+      window.border = 3;  # pixel boundary between windows
+
+      # defaults; required for keybindings decl.
+      modifier = "Mod1";
+      # list of launchers: https://www.reddit.com/r/swaywm/comments/v39hxa/your_favorite_launcher/
+      # menu = "${pkgs.dmenu}/bin/dmenu_path";
+      menu = "${pkgs.fuzzel}/bin/fuzzel";
+      # menu = "${pkgs.albert}/bin/albert";
+      left = "h";
+      down = "j";
+      up = "k";
+      right = "l";
+      keybindings = {
+        "${modifier}+Return" = "exec ${terminal}";
+        "${modifier}+Shift+q" = "kill";
+        "${modifier}+d" = "exec ${menu}";
+
+        "${modifier}+${left}" = "focus left";
+        "${modifier}+${down}" = "focus down";
+        "${modifier}+${up}" = "focus up";
+        "${modifier}+${right}" = "focus right";
+
+        "${modifier}+Left" = "focus left";
+        "${modifier}+Down" = "focus down";
+        "${modifier}+Up" = "focus up";
+        "${modifier}+Right" = "focus right";
+
+        "${modifier}+Shift+${left}" = "move left";
+        "${modifier}+Shift+${down}" = "move down";
+        "${modifier}+Shift+${up}" = "move up";
+        "${modifier}+Shift+${right}" = "move right";
+
+        "${modifier}+Shift+Left" = "move left";
+        "${modifier}+Shift+Down" = "move down";
+        "${modifier}+Shift+Up" = "move up";
+        "${modifier}+Shift+Right" = "move right";
+
+        "${modifier}+b" = "splith";
+        "${modifier}+v" = "splitv";
+        "${modifier}+f" = "fullscreen toggle";
+        "${modifier}+a" = "focus parent";
+
+        "${modifier}+s" = "layout stacking";
+        "${modifier}+w" = "layout tabbed";
+        "${modifier}+e" = "layout toggle split";
+
+        "${modifier}+Shift+space" = "floating toggle";
+        "${modifier}+space" = "focus mode_toggle";
+
+        "${modifier}+1" = "workspace number 1";
+        "${modifier}+2" = "workspace number 2";
+        "${modifier}+3" = "workspace number 3";
+        "${modifier}+4" = "workspace number 4";
+        "${modifier}+5" = "workspace number 5";
+        "${modifier}+6" = "workspace number 6";
+        "${modifier}+7" = "workspace number 7";
+        "${modifier}+8" = "workspace number 8";
+        "${modifier}+9" = "workspace number 9";
+
+        "${modifier}+Shift+1" =
+          "move container to workspace number 1";
+        "${modifier}+Shift+2" =
+          "move container to workspace number 2";
+        "${modifier}+Shift+3" =
+          "move container to workspace number 3";
+        "${modifier}+Shift+4" =
+          "move container to workspace number 4";
+        "${modifier}+Shift+5" =
+          "move container to workspace number 5";
+        "${modifier}+Shift+6" =
+          "move container to workspace number 6";
+        "${modifier}+Shift+7" =
+          "move container to workspace number 7";
+        "${modifier}+Shift+8" =
+          "move container to workspace number 8";
+        "${modifier}+Shift+9" =
+          "move container to workspace number 9";
+
+        "${modifier}+Shift+minus" = "move scratchpad";
+        "${modifier}+minus" = "scratchpad show";
+
+        "${modifier}+Shift+c" = "reload";
+        "${modifier}+Shift+e" =
+          "exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'";
+
+        "${modifier}+r" = "mode resize";
+      } // {
+        # media keys
+        XF86MonBrightnessDown = ''exec "${pkgs.brightnessctl}/bin/brightnessctl set 2%-"'';
+        XF86MonBrightnessUp = ''exec "${pkgs.brightnessctl}/bin/brightnessctl set +2%"'';
+
+        XF86AudioRaiseVolume = "exec '${pkgs.pulsemixer}/bin/pulsemixer --change-volume +5'";
+        XF86AudioLowerVolume = "exec '${pkgs.pulsemixer}/bin/pulsemixer --change-volume -5'";
+        XF86AudioMute = "exec '${pkgs.pulsemixer}/bin/pulsemixer --toggle-mute'";
+
+      };
+
+      # mostly defaults:
+      bars = [{
+        mode = "dock";
+        hiddenState = "hide";
+        position = "top";
+        command = "${pkgs.waybar}/bin/waybar";
+        workspaceButtons = true;
+        workspaceNumbers = true;
+        statusCommand = "${pkgs.i3status}/bin/i3status";
+        fonts = {
+          names = [ "monospace" ];
+          size = 8.0;
+        };
+        trayOutput = "primary";
+        colors = {
+          background = "#000000";
+          statusline = "#ffffff";
+          separator = "#666666";
+          focusedWorkspace = {
+            border = "#4c7899";
+            background = "#285577";
+            text = "#ffffff";
+          };
+          activeWorkspace = {
+            border = "#333333";
+            background = "#5f676a";
+            text = "#ffffff";
+          };
+          inactiveWorkspace = {
+            border = "#333333";
+            background = "#222222";
+            text = "#888888";
+          };
+          urgentWorkspace = {
+            border = "#2f343a";
+            background = "#900000";
+            text = "#ffffff";
+          };
+          bindingMode = {
+            border = "#2f343a";
+            background = "#900000";
+            text = "#ffffff";
+          };
+        };
+      }];
+    };
+  };
+
+  programs.waybar = lib.mkIf (gui == "sway") {
+    enable = true;
+    # docs: https://github.com/Alexays/Waybar/wiki/Configuration
+    settings = {
+      mainBar = {
+        layer = "top";
+        height = 40;
+        modules-left = ["sway/workspaces" "sway/mode"];
+        modules-center = ["sway/window"];
+        modules-right = ["custom/mediaplayer" "clock" "cpu" "network"];
+        "sway/window" = {
+          max-length = 50;
+        };
+        # include song artist/title. source: https://www.reddit.com/r/swaywm/comments/ni0vso/waybar_spotify_tracktitle/
+        "custom/mediaplayer" = {
+          exec = pkgs.writeShellScript "waybar-mediaplayer" ''
+            player_status=$(${pkgs.playerctl}/bin/playerctl status 2> /dev/null)
+            if [ "$player_status" = "Playing" ]; then
+              echo "$(${pkgs.playerctl}/bin/playerctl metadata artist) - $(${pkgs.playerctl}/bin/playerctl metadata title)"
+            elif [ "$player_status" = "Paused" ]; then
+              echo " $(${pkgs.playerctl}/bin/playerctl metadata artist) - $(${pkgs.playerctl}/bin/playerctl metadata title)"
+            fi
+          '';
+          interval = 2;
+          format = "{}  ";
+          # return-type = "json";
+          on-click = "${pkgs.playerctl}/bin/playerctl play-pause";
+          on-scroll-up = "${pkgs.playerctl}/bin/playerctl next";
+          on-scroll-down = "${pkgs.playerctl}/bin/playerctl previous";
+        };
+        network = {
+          interval = 1;
+          format-ethernet = "{ifname}: {ipaddr}/{cidr}   up: {bandwidthUpBits} down: {bandwidthDownBits}";
+        };
+        cpu = {
+          format = "{usage}% ";
+          tooltip = false;
+        };
+        clock = {
+          format-alt = "{:%a, %d. %b  %H:%M}";
+        };
+      };
+    };
+    # style = ''
+    #   * {
+    #     border: none;
+    #     border-radius: 0;
+    #     font-family: Source Code Pro;
+    #   }
+    #   window#waybar {
+    #     background: #16191C;
+    #     color: #AAB2BF;
+    #   }
+    #   #workspaces button {
+    #     padding: 0 5px;
+    #   }
+    #   .custom-spotify {
+    #     padding: 0 10px;
+    #     margin: 0 4px;
+    #     background-color: #1DB954;
+    #     color: black;
+    #   }
+    # '';
+  };
+
+
+  programs.firefox = lib.mkIf (gui != null) {
+    enable = true;
+
+    profiles.default = {
+      bookmarks = {
+        fed_uninsane.url = "https://fed.uninsane.org/";
+        delightful.url = "https://delightful.club/";
+        crowdsupply.url = "https://www.crowdsupply.com/";
+        linux_phone_apps.url = "https://linuxphoneapps.org/mobile-compatibility/5/";
+        mempool.url = "https://jochen-hoenicke.de/queue";
+      };
+    };
+
+    # firefox profile support seems to be broken :shrug:
+    # profiles.other = {
+    #   id = 2;
+    # };
+
+    # NB: these must be manually enabled in the Firefox settings on first start
+    # extensions can be found here: https://gitlab.com/rycee/nur-expressions/-/blob/master/pkgs/firefox-addons/addons.json
+    extensions = [
+      pkgs.nur.repos.rycee.firefox-addons.bypass-paywalls-clean
+      pkgs.nur.repos.rycee.firefox-addons.metamask
+      pkgs.nur.repos.rycee.firefox-addons.i-dont-care-about-cookies
+      pkgs.nur.repos.rycee.firefox-addons.sidebery
+      pkgs.nur.repos.rycee.firefox-addons.sponsorblock
+      pkgs.nur.repos.rycee.firefox-addons.ublock-origin
+    ];
+  };
+
+  home.shellAliases = {
+    ":q" = "exit";
+    # common typos
+    "cd.." = "cd ..";
+    "cd../" = "cd ../";
+  };
+
+
+  home.packages = [
+    pkgs.btrfs-progs
+    pkgs.dig
+    pkgs.cryptsetup
+    pkgs.duplicity
+    pkgs.fatresize
+    pkgs.fd
+    pkgs.file
+    pkgs.gnumake
+    pkgs.gptfdisk
+    pkgs.hdparm
+    pkgs.htop
+    pkgs.iftop
+    pkgs.inetutils  # for telnet
+    pkgs.iotop
+    pkgs.iptables
+    pkgs.jq
+    pkgs.killall
+    pkgs.lm_sensors  # for sensors-detect
+    pkgs.lsof
+    pkgs.mix2nix
+    pkgs.netcat
+    pkgs.nixpkgs-review
+    pkgs.nixUnstable  # TODO: still needed on 22.05?
+    # pkgs.nixos-generators
+    # pkgs.nettools
+    pkgs.nmap
+    pkgs.obsidian
+    pkgs.parted
+    pkgs.pciutils
+    # pkgs.ponymix
+    pkgs.powertop
+    pkgs.pulsemixer
+    pkgs.python3
+    pkgs.ripgrep
+    pkgs.smartmontools
+    pkgs.snapper
+    pkgs.socat
+    pkgs.sudo
+    pkgs.usbutils
+    pkgs.wget
+    pkgs.wireguard-tools
+    pkgs.youtube-dl
+    pkgs.zola
+  ]
+  ++ (if gui != null then
+  [
+    # GUI only
+    pkgs.chromium
+    pkgs.clinfo
+    pkgs.element-desktop  # broken on phosh
+    pkgs.evince  # works on phosh
+    pkgs.font-manager
+    pkgs.gimp  # broken on phosh
+    pkgs.gnome.dconf-editor
+    pkgs.gnome.file-roller
+    pkgs.gnome.gnome-maps  # works on phosh
+    pkgs.gnome.nautilus
+    pkgs.gnome-podcasts
+    pkgs.gnome.gnome-terminal  # works on phosh
+    pkgs.inkscape
+    pkgs.kaiteki  # Pleroma client
+    pkgs.libreoffice-fresh  # XXX colin: maybe don't want this on mobile
+    pkgs.mesa-demos
+    pkgs.playerctl
+    pkgs.tdesktop  # broken on phosh
+    pkgs.vlc  # works on phosh
+    pkgs.whalebird # pleroma client. input is broken on phosh
+    pkgs.xterm  # broken on phosh
+  ] else [])
+  ++ (if gui == "sway" then
+  [
+    # TODO: move this to helpers/gui/sway.nix?
+    pkgs.swaylock
+    pkgs.swayidle
+    pkgs.wl-clipboard
+    pkgs.mako # notification daemon
+    # pkgs.dmenu # todo: use wofi?
+    # user stuff
+    # pkgs.pavucontrol
+  ] else [])
+  ++ (if gui != null && system == "x86_64-linux" then
+  [
+    # x86_64 only
+    pkgs.signal-desktop
+    pkgs.spotify
+    pkgs.discord
+  ] else [])
+  ++ extraPackages;
+}

helpers/set-hostname.nix

@@ -0,0 +1,4 @@
+hostName: { ... }:
+{
+  networking.hostName = hostName;
+}

helpers/universal/default.nix

@@ -0,0 +1,17 @@
+{ ... }:
+
+{
+  imports = [
+    ./fs.nix
+    ./home-manager.nix
+    ./nix-cache.nix
+    ./users.nix
+  ];
+
+  time.timeZone = "America/Los_Angeles";
+
+  environment.variables = {
+    EDITOR = "vim";
+  };
+}
+

helpers/universal/fs.nix

@@ -0,0 +1,25 @@
+{ pkgs, ... }:
+
+{
+  fileSystems."/mnt/media-uninsane" = {
+    # device = "sshfs#colin@uninsane.org:/opt/uninsane/media";
+    device = "colin@uninsane.org:/opt/uninsane/media";
+    fsType = "fuse.sshfs";
+    options = [
+      "x-systemd.automount"
+      "_netdev"
+      "user"
+      "idmap=user"
+      "transform_symlinks"
+      "identityfile=/home/colin/.ssh/id_ed25519"
+      "allow_other"
+      "default_permissions"
+      "uid=1000"
+      "gid=1000"
+    ];
+  };
+  environment.systemPackages = [
+    pkgs.sshfs-fuse
+  ];
+}
+

helpers/universal/home-manager.nix

@@ -0,0 +1,9 @@
+{ home-manager, config, pkgs, ... }:
+{
+  imports = [
+    home-manager.nixosModule
+  ];
+
+  home-manager.useGlobalPkgs = true;
+  home-manager.useUserPackages = true;
+}

helpers/universal/nix-cache.nix

@@ -0,0 +1,16 @@
+{ ... }:
+
+{
+  # use our own binary cache
+  nix.settings = {
+    substituters = [
+      "https://nixcache.uninsane.org"
+      "https://nix-community.cachix.org"
+      "https://cache.nixos.org/"
+    ];
+    trusted-public-keys = [
+      "nixcache.uninsane.org:r3WILM6+QrkmsLgqVQcEdibFD7Q/4gyzD9dGT33GP70="
+      "nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs="
+    ];
+  };
+}

helpers/universal/users.nix

@@ -0,0 +1,53 @@
+{ config, pkgs, lib, ... }:
+
+# installer docs: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/profiles/installation-device.nix
+{
+  # Users are exactly these specified here;
+  # old ones will be deleted (from /etc/passwd, etc) upon upgrade.
+  users.mutableUsers = false;
+
+  # docs: https://nixpkgs-manual-sphinx-markedown-example.netlify.app/generated/options-db.xml.html#users-users
+  users.users.colin = {
+    # sets group to "users" (?)
+    isNormalUser = true;
+    home = "/home/colin";
+    uid = 1000;
+    # XXX colin: this is what the installer has, but is it necessary?
+    # group = "users";
+    extraGroups = [
+      "wheel"
+      "nixbuild"
+      "networkmanager"
+      # phosh/mobile. XXX colin: unsure if necessary
+      "video"
+      "feedbackd"
+      "dialout" # required for modem access
+    ];
+    initialPassword = lib.mkDefault "";
+    shell = pkgs.zsh;
+    # shell = pkgs.bashInteractive;
+    # XXX colin: create ssh key for THIS user by logging in and running:
+    #   ssh-keygen -t ed25519
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGSDe/y0e9PSeUwYlMPjzhW0UhNsGAGsW3lCG3apxrD5 colin@colin.desktop"
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIG+MZ/l5d8g5hbxMB9ed1uyvhV85jwNrSVNVxb5ujQjw colin@lappy"
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPU5GlsSfbaarMvDA20bxpSZGWviEzXGD8gtrIowc1pX colin@desko"
+      # TODO: should probably only let this authenticate to my server
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGCLCA9KbjXaXNNMJJvqbPO5KQQ64JCdG8sg88AfdKzi colin@moby"
+    ];
+  };
+
+  security.sudo = {
+    enable = true;
+    wheelNeedsPassword = false;
+  };
+
+  services.openssh = {
+    enable = true;
+    permitRootLogin = "no";
+    passwordAuthentication = false;
+  };
+
+  # TODO colin: move this somewhere else!
+  programs.vim.defaultEditor = true;
+}

hosts/common/bluetooth.nix

@@ -1,16 +0,0 @@
-{ lib, pkgs, ... }:
-
-{
-  # persist external pairings by default
-  sane.persist.sys.plaintext = [ "/var/lib/bluetooth" ];
-
-  sane.fs."/var/lib/bluetooth".generated.acl.mode = "0700";
-  sane.fs."/var/lib/bluetooth/.secrets.stamp" = {
-    wantedBeforeBy = [ "bluetooth.service" ];
-    # XXX: install-bluetooth uses sed, but that's part of the default systemd unit path, it seems
-    generated.script.script = builtins.readFile ../../scripts/install-bluetooth + ''
-      touch "/var/lib/bluetooth/.secrets.stamp"
-    '';
-    generated.script.scriptArgs = [ "/run/secrets/bt" ];
-  };
-}

hosts/common/cross.nix

@@ -1,15 +0,0 @@
-{ ... }:
-
-{
-  # the configuration of which specific package set `pkgs.cross` refers to happens elsewhere;
-  # here we just define them all.
-  nixpkgs.overlays = [
-    (next: prev: {
-      # non-emulated packages build *from* local *for* target.
-      # for large packages like the linux kernel which are expensive to build under emulation,
-      # the config can explicitly pull such packages from `pkgs.cross` to do more efficient cross-compilation.
-      crossFrom."x86_64-linux" = (prev.forceSystem "x86_64-linux" null).appendOverlays next.overlays;
-      crossFrom."aarch64-linux" = (prev.forceSystem "aarch64-linux" null).appendOverlays next.overlays;
-    })
-  ];
-}

hosts/common/default.nix

@@ -1,77 +0,0 @@
-{ pkgs, ... }:
-{
-  imports = [
-    ./bluetooth.nix
-    ./cross.nix
-    ./feeds.nix
-    ./fs.nix
-    ./hardware
-    ./i2p.nix
-    ./ids.nix
-    ./machine-id.nix
-    ./net.nix
-    ./secrets.nix
-    ./ssh.nix
-    ./users.nix
-    ./vpn.nix
-  ];
-
-  sane.home-manager.enable = true;
-  sane.nixcache.enable-trusted-keys = true;
-  sane.packages.enableConsolePkgs = true;
-  sane.packages.enableSystemPkgs = true;
-
-  sane.persist.sys.plaintext = [
-    "/var/log"
-    "/var/backup"  # for e.g. postgres dumps
-    # TODO: move elsewhere
-    "/var/lib/alsa"                # preserve output levels, default devices
-    "/var/lib/colord"              # preserve color calibrations (?)
-    "/var/lib/machines"            # maybe not needed, but would be painful to add a VM and forget.
-  ];
-
-  nixpkgs.config.allowUnfree = true;
-
-  # time.timeZone = "America/Los_Angeles";
-  time.timeZone = "Etc/UTC";  # DST is too confusing for me => use a stable timezone
-
-  # allow `nix flake ...` command
-  nix.extraOptions = ''
-    experimental-features = nix-command flakes
-  '';
-
-  # TODO: move this into home-manager?
-  fonts = {
-    enableDefaultFonts = true;
-    fonts = with pkgs; [ font-awesome twitter-color-emoji hack-font ];
-    fontconfig.enable = true;
-    fontconfig.defaultFonts = {
-      emoji = [ "Font Awesome 6 Free" "Twitter Color Emoji" ];
-      monospace = [ "Hack" ];
-      serif = [ "DejaVu Serif" ];
-      sansSerif = [ "DejaVu Sans" ];
-    };
-  };
-
-  # disable non-required packages like nano, perl, rsync, strace
-  environment.defaultPackages = [];
-
-  # programs.vim.defaultEditor = true;
-  environment.variables = {
-    EDITOR = "vim";
-    # git claims it should use EDITOR, but it doesn't!
-    GIT_EDITOR = "vim";
-    # TODO: these should be moved to `home.sessionVariables` (home-manager)
-    # Electron apps should use native wayland backend:
-    #   https://nixos.wiki/wiki/Slack#Wayland
-    # Discord under sway crashes with this.
-    # NIXOS_OZONE_WL = "1";
-    # LIBGL_ALWAYS_SOFTWARE = "1";
-  };
-  # enable zsh completions
-  environment.pathsToLink = [ "/share/zsh" ];
-
-  # link debug symbols into /run/current-system/sw/lib/debug
-  # hopefully picked up by gdb automatically?
-  environment.enableDebugInfo = true;
-}

hosts/common/feeds.nix

@@ -1,184 +0,0 @@
-{ lib, sane-data, ... }:
-let
-  hourly = { freq = "hourly"; };
-  daily = { freq = "daily"; };
-  weekly = { freq = "weekly"; };
-  infrequent = { freq = "infrequent"; };
-
-  art = { cat = "art"; };
-  humor = { cat = "humor"; };
-  pol = { cat = "pol"; };  # or maybe just "social"
-  rat = { cat = "rat"; };
-  tech = { cat = "tech"; };
-  uncat = { cat = "uncat"; };
-
-  text = { format = "text"; };
-
-  mkRss = format: url: { inherit url format; } // uncat // infrequent;
-  # format-specific helpers
-  mkText = mkRss "text";
-  mkImg = mkRss "image";
-  mkPod = mkRss "podcast";
-
-  # host-specific helpers
-  mkSubstack = subdomain: { substack = subdomain; };
-
-  fromDb = name:
-    let
-      raw = sane-data.feeds."${name}";
-    in {
-      url = raw.url;
-      # not sure the exact mapping with velocity here: entries per day?
-      freq = lib.mkDefault (
-        if raw.velocity or 0 > 2 then
-          "hourly"
-        else if raw.velocity or 0 > 0.5 then
-          "daily"
-        else if raw.velocity or 0 > 0.1 then
-          "weekly"
-        else
-          "infrequent"
-      );
-    } // lib.optionalAttrs (raw.is_podcast or false) {
-      format = "podcast";
-    };
-
-  podcasts = [
-    (fromDb "lexfridman.com/podcast" // rat)
-    # (mkPod "https://lexfridman.com/feed/podcast/" // rat // weekly)
-    ## Astral Codex Ten
-    (fromDb "sscpodcast.libsyn.com" // rat)
-    ## Econ Talk
-    (fromDb "feeds.simplecast.com/wgl4xEgL" // rat)
-    ## Cory Doctorow -- both podcast & text entries
-    (fromDb "craphound.com" // pol)
-    (mkPod "https://congressionaldish.libsyn.com/rss" // pol // infrequent)
-    ## Civboot -- https://anchor.fm/civboot
-    (fromDb "anchor.fm/s/34c7232c/podcast/rss" // tech)
-    (fromDb "feeds.feedburner.com/80000HoursPodcast" // rat)
-    (fromDb "allinchamathjason.libsyn.com" // pol)
-    (fromDb "acquired.libsyn.com" // tech)
-    # The Intercept - Deconstructed; also available: <rss.acast.com/deconstructed>
-    (fromDb "rss.prod.firstlook.media/deconstructed/podcast.rss" // pol)
-    ## The Daily
-    (mkPod "https://feeds.simplecast.com/54nAGcIl" // pol // daily)
-    # The Intercept - Intercepted; also available: <https://rss.acast.com/intercepted-with-jeremy-scahill>
-    (fromDb "rss.prod.firstlook.media/intercepted/podcast.rss" // pol)
-    (fromDb "podcast.posttv.com/itunes/post-reports.xml" // pol)
-    ## Eric Weinstein
-    (fromDb "rss.art19.com/the-portal" // rat)
-    (fromDb "darknetdiaries.com" // tech)
-    ## Radiolab -- also available here, but ONLY OVER HTTP: <http://feeds.wnyc.org/radiolab>
-    (fromDb "feeds.feedburner.com/radiolab" // pol)
-    ## Sam Harris
-    (fromDb "wakingup.libsyn.com" // pol)
-    ## 99% Invisible -- also available here: <https://feeds.simplecast.com/BqbsxVfO>
-    (fromDb "feeds.99percentinvisible.org/99percentinvisible" // pol)
-    (fromDb "rss.acast.com/ft-tech-tonic" // tech)
-    (fromDb "feeds.feedburner.com/dancarlin/history" // rat)
-    (fromDb "rss.art19.com/60-minutes" // pol)
-    ## The Verge - Decoder
-    (fromDb "feeds.megaphone.fm/recodedecode" // tech)
-    ## Matrix (chat) Live
-    (fromDb "feed.podbean.com/matrixlive/feed.xml" // tech)
-    ## Michael Malice - Your Welcome -- also available here: <https://origin.podcastone.com/podcast?categoryID2=2232>
-    (fromDb "rss.art19.com/your-welcome" // pol)
-  ];
-
-  texts = [
-    # AGGREGATORS (> 1 post/day)
-    (fromDb "lesswrong.com" // rat)
-    (fromDb "econlib.org" // pol)
-
-    # AGGREGATORS (< 1 post/day)
-    (mkText "https://palladiummag.com/feed" // uncat // weekly)
-    (mkText "https://profectusmag.com/feed" // uncat // weekly)
-    (mkText "https://semiaccurate.com/feed" // tech // weekly)
-    (mkText "https://linuxphoneapps.org/blog/atom.xml" // tech // infrequent)
-    (mkText "https://spectrum.ieee.org/rss" // tech // weekly)
-
-    ## No Moods, Ads or Cutesy Fucking Icons
-    (mkText "https://www.rifters.com/crawl/?feed=rss2" // uncat // weekly)
-
-    # DEVELOPERS
-    (fromDb "uninsane.org" // tech)
-    (fromDb "mg.lol" // tech)
-    ## Ken Shirriff
-    (fromDb "righto.com" // tech)
-    ## Vitalik Buterin
-    (mkText "https://vitalik.ca/feed.xml" // tech // infrequent)
-    ## ian (Sanctuary)
-    (mkText "https://sagacioussuricata.com/feed.xml" // tech // infrequent)
-    ## Bunnie Juang
-    (mkText "https://www.bunniestudios.com/blog/?feed=rss2" // tech // infrequent)
-    (mkText "https://blog.danieljanus.pl/atom.xml" // tech // infrequent)
-    (mkText "https://ianthehenry.com/feed.xml" // tech // infrequent)
-    (mkText "https://bitbashing.io/feed.xml" // tech // infrequent)
-    (mkText "https://idiomdrottning.org/feed.xml" // uncat // daily)
-    (mkText "https://anish.lakhwara.com/home.html" // tech // weekly)
-    (mkText "https://www.jefftk.com/news.rss" // tech // daily)
-    (mkText "https://pomeroyb.com/feed.xml" // tech // infrequent)
-
-    # (TECH; POL) COMMENTATORS
-    (fromDb "edwardsnowden.substack.com" // pol // text)
-    (mkText "http://benjaminrosshoffman.com/feed" // pol // weekly)
-    ## Ben Thompson
-    (mkText "https://www.stratechery.com/rss" // pol // weekly)
-    ## Balaji
-    (mkText "https://balajis.com/rss" // pol // weekly)
-    (mkText "https://www.ben-evans.com/benedictevans/rss.xml" // pol // weekly)
-    (mkText "https://www.lynalden.com/feed" // pol // infrequent)
-    (mkText "https://austinvernon.site/rss.xml" // tech // infrequent)
-    (mkSubstack "oversharing" // pol // daily)
-    (mkSubstack "doomberg" // tech // weekly)
-    ## David Rosenthal
-    (mkText "https://blog.dshr.org/rss.xml" // pol // weekly)
-    ## Matt Levine
-    (mkText "https://www.bloomberg.com/opinion/authors/ARbTQlRLRjE/matthew-s-levine.rss" // pol // weekly)
-    (mkText "https://stpeter.im/atom.xml" // pol // weekly)
-
-    # RATIONALITY/PHILOSOPHY/ETC
-    (mkSubstack "samkriss" // humor // infrequent)
-    (mkText "https://unintendedconsequenc.es/feed" // rat // infrequent)
-    (mkText "https://applieddivinitystudies.com/atom.xml" // rat // weekly)
-    (mkText "https://slimemoldtimemold.com/feed.xml" // rat // weekly)
-    (mkText "https://www.richardcarrier.info/feed" // rat // weekly)
-    (mkText "https://www.gwern.net/feed.xml" // uncat // infrequent)
-    ## Jason Crawford
-    (mkText "https://rootsofprogress.org/feed.xml" // rat // weekly)
-    ## Robin Hanson
-    (mkText "https://www.overcomingbias.com/feed" // rat // daily)
-    ## Scott Alexander
-    (mkSubstack "astralcodexten" // rat // daily)
-    ## Paul Christiano
-    (mkText "https://sideways-view.com/feed" // rat // infrequent)
-    ## Sean Carroll
-    (mkText "https://www.preposterousuniverse.com/rss" // rat // infrequent)
-
-    ## mostly dating topics. not advice, or humor, but looking through a social lens
-    (mkText "https://putanumonit.com/feed" // rat // infrequent)
-
-    # CODE
-    # (mkText "https://github.com/Kaiteki-Fedi/Kaiteki/commits/master.atom" // tech // infrequent)
-  ];
-
-  images = [
-    (mkImg "https://www.smbc-comics.com/comic/rss" // humor // daily)
-    (mkImg "https://xkcd.com/atom.xml" // humor // daily)
-    (mkImg "https://pbfcomics.com/feed" // humor // infrequent)
-    # (mkImg "http://dilbert.com/feed" // humor // daily)
-
-    # ART
-    (mkImg "https://miniature-calendar.com/feed" // art // daily)
-  ];
-in
-{
-  sane.feeds = texts ++ images ++ podcasts;
-
-  assertions = builtins.map
-    (p: {
-      assertion = p.format or "unknown" == "podcast";
-      message = ''${p.url} is not a podcast: ${p.format or "unknown"}'';
-    })
-    podcasts;
-}

hosts/common/fs.nix

@@ -1,74 +0,0 @@
-{ pkgs, ... }:
-
-let sshOpts = rec {
-  fsType = "fuse.sshfs";
-  optionsBase = [
-    "x-systemd.automount"
-    "_netdev"
-    "user"
-    "identityfile=/home/colin/.ssh/id_ed25519"
-    "allow_other"
-    "default_permissions"
-  ];
-  optionsColin = optionsBase ++ [
-    "transform_symlinks"
-    "idmap=user"
-    "uid=1000"
-    "gid=100"
-  ];
-
-  optionsRoot = optionsBase ++ [
-    # we don't transform_symlinks because that breaks the validity of remote /nix stores
-    "sftp_server=/run/wrappers/bin/sudo\\040/run/current-system/sw/libexec/sftp-server"
-  ];
-};
-in
-{
-  environment.pathsToLink = [
-    # needed to achieve superuser access for user-mounted filesystems (see optionsRoot above)
-    # we can only link whole directories here, even though we're only interested in pkgs.openssh
-    "/libexec"
-  ];
-
-  fileSystems."/mnt/servo-media-wan" = {
-    device = "colin@uninsane.org:/var/lib/uninsane/media";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsColin;
-    noCheck = true;
-  };
-  fileSystems."/mnt/servo-media-lan" = {
-    device = "colin@servo:/var/lib/uninsane/media";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsColin;
-    noCheck = true;
-  };
-  fileSystems."/mnt/servo-root-wan" = {
-    device = "colin@uninsane.org:/";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsRoot;
-    noCheck = true;
-  };
-  fileSystems."/mnt/servo-root-lan" = {
-    device = "colin@servo:/";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsRoot;
-    noCheck = true;
-  };
-  fileSystems."/mnt/desko-home" = {
-    device = "colin@desko:/home/colin";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsColin;
-    noCheck = true;
-  };
-  fileSystems."/mnt/desko-root" = {
-    device = "colin@desko:/";
-    inherit (sshOpts) fsType;
-    options = sshOpts.optionsRoot;
-    noCheck = true;
-  };
-
-  environment.systemPackages = [
-    pkgs.sshfs-fuse
-  ];
-}
-

hosts/common/hardware/all.nix

@@ -1,40 +0,0 @@
-{ lib, pkgs, ... }:
-
-{
-  boot.initrd.supportedFilesystems = [ "ext4" "btrfs" "ext2" "ext3" "vfat" ];
-  # useful emergency utils
-  boot.initrd.extraUtilsCommands = ''
-    copy_bin_and_libs ${pkgs.btrfs-progs}/bin/btrfstune
-  '';
-  boot.kernelParams = [ "boot.shell_on_fail" ];
-  # other kernelParams:
-  #   "boot.trace"
-  #   "systemd.log_level=debug"
-  #   "systemd.log_target=console"
-
-  # hack in the `boot.shell_on_fail` arg since that doesn't always seem to work.
-  boot.initrd.preFailCommands = "allowShell=1";
-
-  # default: 4 (warn). 7 is debug
-  boot.consoleLogLevel = 7;
-
-  boot.loader.grub.enable = lib.mkDefault false;
-  boot.loader.generic-extlinux-compatible.enable = lib.mkDefault true;
-
-  # non-free firmware
-  hardware.enableRedistributableFirmware = true;
-  services.fwupd.enable = true;
-
-  # powertop will default to putting USB devices -- including HID -- to sleep after TWO SECONDS
-  powerManagement.powertop.enable = false;
-
-  # services.snapper.configs = {
-  #   root = {
-  #     subvolume = "/";
-  #     extraConfig = {
-  #       ALLOW_USERS = "colin";
-  #     };
-  #   };
-  # };
-  # services.snapper.snapshotInterval = "daily";
-}

hosts/common/hardware/default.nix

@@ -1,8 +0,0 @@
-{ ... }:
-
-{
-  imports = [
-    ./all.nix
-    ./x86_64.nix
-  ];
-}

hosts/common/hardware/x86_64.nix

@@ -1,26 +0,0 @@
-{ lib, pkgs, ... }:
-
-with lib;
-{
-  config = mkIf (pkgs.system == "x86_64-linux") {
-    boot.initrd.availableKernelModules = [
-      "xhci_pci" "ahci" "sd_mod" "sdhci_pci"  # nixos-generate-config defaults
-      "usb_storage"   # rpi needed this to boot from usb storage, i think.
-      "nvme"  # to boot from nvme devices
-      # efi_pstore evivars
-    ];
-
-    # enable cross compilation
-    boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
-    # nixpkgs.config.allowUnsupportedSystem = true;
-    # nixpkgs.crossSystem.system = "aarch64-linux";
-
-    powerManagement.cpuFreqGovernor = "powersave";
-    hardware.cpu.amd.updateMicrocode = true;    # desktop
-    hardware.cpu.intel.updateMicrocode = true;  # laptop
-
-    hardware.opengl.driSupport = true;
-    # For 32 bit applications
-    hardware.opengl.driSupport32Bit = true;
-  };
-}

hosts/common/i2p.nix

@@ -1,4 +0,0 @@
-{ ... }:
-{
-  services.i2p.enable = true;
-}

hosts/common/ids.nix

@@ -1,60 +0,0 @@
-{ ... }:
-
-{
-  # legacy servo users, some are inconvenient to migrate
-  sane.ids.dhcpcd.gid = 991;
-  sane.ids.dhcpcd.uid = 992;
-  sane.ids.gitea.gid = 993;
-  sane.ids.git.uid = 994;
-  sane.ids.jellyfin.gid = 994;
-  sane.ids.pleroma.gid = 995;
-  sane.ids.jellyfin.uid = 996;
-  sane.ids.acme.gid = 996;
-  sane.ids.pleroma.uid = 997;
-  sane.ids.acme.uid = 998;
-
-  # greetd (used by sway)
-  sane.ids.greeter.uid = 999;
-  sane.ids.greeter.gid = 999;
-
-  # new servo users
-  sane.ids.freshrss.uid = 2401;
-  sane.ids.freshrss.gid = 2401;
-  sane.ids.mediawiki.uid = 2402;
-
-  sane.ids.colin.uid = 1000;
-  sane.ids.guest.uid = 1100;
-
-  # found on all hosts
-  sane.ids.sshd.uid = 2001;  # 997
-  sane.ids.sshd.gid = 2001;  # 997
-  sane.ids.polkituser.gid = 2002;  # 998
-  sane.ids.systemd-coredump.gid = 2003;  # 996
-  sane.ids.nscd.uid = 2004;
-  sane.ids.nscd.gid = 2004;
-  sane.ids.systemd-oom.uid = 2005;
-  sane.ids.systemd-oom.gid = 2005;
-
-  # found on graphical hosts
-  sane.ids.nm-iodine.uid = 2101;  # desko/moby/lappy
-
-  # found on desko host
-  # from services.usbmuxd
-  sane.ids.usbmux.uid = 2204;
-  sane.ids.usbmux.gid = 2204;
-
-
-  # originally found on moby host
-  # gnome core-shell
-  sane.ids.avahi.uid = 2304;
-  sane.ids.avahi.gid = 2304;
-  sane.ids.colord.uid = 2305;
-  sane.ids.colord.gid = 2305;
-  sane.ids.geoclue.uid = 2306;
-  sane.ids.geoclue.gid = 2306;
-  # gnome core-os-services
-  sane.ids.rtkit.uid = 2307;
-  sane.ids.rtkit.gid = 2307;
-  # phosh
-  sane.ids.feedbackd.gid = 2308;
-}

hosts/common/machine-id.nix

@@ -1,16 +0,0 @@
-{ ... }:
-{
-  # /etc/machine-id is a globally unique identifier used for:
-  # - systemd-networkd: DHCP lease renewal (instead of keying by the MAC address)
-  # - systemd-journald: to filter logs by host
-  # - chromium (potentially to track re-installations)
-  # - gdbus; system services that might upgrade to AF_LOCAL if both services can confirm they're on the same machine
-  # because of e.g. the chromium use, we *don't want* to persist this.
-  # however, `journalctl` won't show logs from previous boots unless the machine-ids match.
-  # so for now, generate something unique from the host ssh key.
-  # TODO: move this into modules?
-  system.activationScripts.machine-id = {
-    deps = [ "etc" ];
-    text = "sha256sum /etc/ssh/host_keys/ssh_host_ed25519_key | cut -c 1-32 > /etc/machine-id";
-  };
-}

hosts/common/net.nix

@@ -1,43 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-{
-  # if using router's DNS, these mappings will already exist.
-  # if using a different DNS provider (which servo does), then we need to explicity provide them.
-  # ugly hack. would be better to get servo to somehow use the router's DNS
-  networking.hosts = {
-    "192.168.0.5" = [ "servo" ];
-    "192.168.0.20" = [ "lappy" ];
-    "192.168.0.22" = [ "desko" ];
-    "192.168.0.48" = [ "moby" ];
-  };
-
-  # the default backend is "wpa_supplicant".
-  # wpa_supplicant reliably picks weak APs to connect to.
-  # see: <https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/474>
-  # iwd is an alternative that shouldn't have this problem
-  # docs:
-  # - <https://nixos.wiki/wiki/Iwd>
-  # - <https://iwd.wiki.kernel.org/networkmanager>
-  # - `man iwd.config`  for global config
-  # - `man iwd.network` for per-SSID config
-  # use `iwctl` to control
-  networking.networkmanager.wifi.backend = "iwd";
-  networking.wireless.iwd.enable = true;
-  networking.wireless.iwd.settings = {
-    # auto-connect to a stronger network if signal drops below this value
-    # bedroom -> bedroom connection is -35 to -40 dBm
-    # bedroom -> living room connection is -60 dBm
-    General.RoamThreshold = "-52";  # default -70
-    General.RoamThreshold5G = "-52";  # default -76
-  };
-
-  sane.fs."/var/lib/iwd/.secrets.psk.stamp" = {
-    wantedBeforeBy = [ "iwd.service" ];
-    generated.acl.mode = "0600";
-    # XXX: install-iwd uses sed, but that's part of the default systemd unit path, it seems
-    generated.script.script = builtins.readFile ../../scripts/install-iwd + ''
-      touch "/var/lib/iwd/.secrets.psk.stamp"
-    '';
-    generated.script.scriptArgs = [ "/run/secrets/iwd" "/var/lib/iwd" ];
-  };
-}

hosts/common/secrets.nix

@@ -1,124 +0,0 @@
-{ config, ... }:
-
-{
-  # SOPS configuration:
-  #   docs: https://github.com/Mic92/sops-nix
-  #
-  # for each new user you want to edit sops files:
-  # create a private age key from ssh key:
-  #   $ mkdir -p ~/.config/sops/age; ssh-to-age -private-key -i ~/.ssh/id_ed25519 > ~/.config/sops/age/keys.txt; chmod 600 ~/.config/sops/age/keys.txt
-  #   if the private key was password protected, then first decrypt it:
-  #     $ cp ~/.ssh/id_ed25519 /tmp/id_ed25519
-  #     $ ssh-keygen -p -N "" -f /tmp/id_ed25519
-  #
-  # for each user you want to decrypt secrets:
-  #   $ cat ~/.ssh/id_ed25519.pub | ssh-to-age
-  #   add the result to .sops.yaml
-  #   since we specify ssh pubkeys in the nix config, you can just grep for `ssh-ed25519` here and use those instead
-  #
-  # for each host you want to decrypt secrets:
-  #   $ cat /etc/ssh/ssh_host_ed25519_key.pub | ssh-to-age
-  #   add the result to .sops.yaml
-  #   $ sops updatekeys secrets/example.yaml
-  #
-  # to create a new secret:
-  #   $ sops secrets/example.yaml
-  #   control access below (sops.secret.<x>.owner = ...)
-  #
-  # to read a secret:
-  #   $ cat /run/secrets/example_key
-
-  # sops.age.sshKeyPaths = [ "/home/colin/.ssh/id_ed25519_dec" ];
-  # This will add secrets.yaml to the nix store
-  # You can avoid this by adding a string to the full path instead, i.e.
-  # sops.defaultSopsFile = "/root/.sops/secrets/example.yaml";
-  sops.defaultSopsFile = ../../secrets/universal.yaml;
-  sops.gnupg.sshKeyPaths = [];  # disable RSA key import
-  # This is using an age key that is expected to already be in the filesystem
-  # sops.age.keyFile = "/home/colin/.ssh/age.pub";
-  # sops.age.keyFile = "/var/lib/sops-nix/key.txt";
-  # This will generate a new key if the key specified above does not exist
-  # sops.age.generateKey = true;
-  # This is the actual specification of the secrets.
-  # sops.secrets.example_key = {
-  #   owner = config.users.users.colin.name;
-  # };
-  # sops.secrets."myservice/my_subdir/my_secret" = {};
-
-  ## universal secrets
-  # TODO: glob these?
-
-  sops.secrets."jackett_apikey" = {
-    sopsFile = ../../secrets/universal.yaml;
-    owner = config.users.users.colin.name;
-  };
-  sops.secrets."router_passwd" = {
-    sopsFile = ../../secrets/universal.yaml;
-  };
-  sops.secrets."wg_ovpnd_us_privkey" = {
-    sopsFile = ../../secrets/universal.yaml;
-  };
-  sops.secrets."wg_ovpnd_us-atl_privkey" = {
-    sopsFile = ../../secrets/universal.yaml;
-  };
-  sops.secrets."wg_ovpnd_us-mi_privkey" = {
-    sopsFile = ../../secrets/universal.yaml;
-  };
-  sops.secrets."wg_ovpnd_ukr_privkey" = {
-    sopsFile = ../../secrets/universal.yaml;
-  };
-
-  sops.secrets."snippets" = {
-    sopsFile = ../../secrets/universal/snippets.bin;
-    format = "binary";
-    owner = config.users.users.colin.name;
-  };
-
-  sops.secrets."bt/car" = {
-    sopsFile = ../../secrets/universal/bt/car.bin;
-    format = "binary";
-  };
-  sops.secrets."bt/earbuds" = {
-    sopsFile = ../../secrets/universal/bt/earbuds.bin;
-    format = "binary";
-  };
-  sops.secrets."bt/portable-speaker" = {
-    sopsFile = ../../secrets/universal/bt/portable-speaker.bin;
-    format = "binary";
-  };
-
-  sops.secrets."iwd/community-university.psk" = {
-    sopsFile = ../../secrets/universal/net/community-university.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/friend-libertarian-dod.psk" = {
-    sopsFile = ../../secrets/universal/net/friend-libertarian-dod.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/friend-rationalist-empathist.psk" = {
-    sopsFile = ../../secrets/universal/net/friend-rationalist-empathist.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/home-bedroom.psk" = {
-    sopsFile = ../../secrets/universal/net/home-bedroom.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/home-shared-24G.psk" = {
-    sopsFile = ../../secrets/universal/net/home-shared-24G.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/home-shared.psk" = {
-    sopsFile = ../../secrets/universal/net/home-shared.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/iphone" = {
-    sopsFile = ../../secrets/universal/net/iphone.psk.bin;
-    format = "binary";
-  };
-  sops.secrets."iwd/parents" = {
-    sopsFile = ../../secrets/universal/net/parents.psk.bin;
-    format = "binary";
-  };
-}
-
-

hosts/common/ssh.nix

@@ -1,24 +0,0 @@
-{ config, lib, sane-data, sane-lib, ... }:
-
-{
-  sane.ssh.pubkeys =
-  let
-    # path is a DNS-style path like [ "org" "uninsane" "root" ]
-    keyNameForPath = path:
-      let
-        rev = lib.reverseList path;
-        name = builtins.head rev;
-        host = lib.concatStringsSep "." (builtins.tail rev);
-      in
-      "${name}@${host}";
-
-    # [{ path :: [String], value :: String }] for the keys we want to install
-    globalKeys = sane-lib.flattenAttrs sane-data.keys;
-    localKeys = sane-lib.flattenAttrs sane-data.keys.org.uninsane.local;
-  in lib.mkMerge (builtins.map
-    ({ path, value }: {
-      "${keyNameForPath path}" = value;
-    })
-    (globalKeys ++ localKeys)
-  );
-}

hosts/common/users.nix

@@ -1,132 +0,0 @@
-{ config, pkgs, lib, sane-lib, ... }:
-
-# installer docs: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/profiles/installation-device.nix
-with lib;
-let
-  cfg = config.sane.users;
-  fs = sane-lib.fs;
-in
-{
-  options = {
-    sane.users.guest.enable = mkOption {
-      default = false;
-      type = types.bool;
-    };
-  };
-
-  config = {
-    # Users are exactly these specified here;
-    # old ones will be deleted (from /etc/passwd, etc) upon upgrade.
-    users.mutableUsers = false;
-
-    # docs: https://nixpkgs-manual-sphinx-markedown-example.netlify.app/generated/options-db.xml.html#users-users
-    users.users.colin = {
-      # sets group to "users" (?)
-      isNormalUser = true;
-      home = "/home/colin";
-      createHome = true;
-      homeMode = "0700";
-      # i don't get exactly what this is, but nixos defaults to this non-deterministically
-      # in /var/lib/nixos/auto-subuid-map and i don't want that.
-      subUidRanges = [
-        { startUid=100000; count=1; }
-      ];
-      group = "users";
-      extraGroups = [
-        "wheel"
-        "nixbuild"
-        "networkmanager"
-        # phosh/mobile. XXX colin: unsure if necessary
-        "video"
-        "feedbackd"
-        "dialout" # required for modem access
-      ];
-
-      # initial password is empty, in case anything goes wrong.
-      # if `colin-passwd` (a password hash) is successfully found/decrypted, that becomes the password at boot.
-      initialPassword = lib.mkDefault "";
-      passwordFile = lib.mkIf (config.sops.secrets ? "colin-passwd") config.sops.secrets.colin-passwd.path;
-
-      shell = pkgs.zsh;
-
-      # mount encrypted stuff at login
-      # some other nix pam users:
-      # - <https://github.com/g00pix/nixconf/blob/32c04f6fa843fed97639dd3f09e157668d3eea1f/profiles/sshfs.nix>
-      # - <https://github.com/lourkeur/distro/blob/11173454c6bb50f7ccab28cc2c757dca21446d1d/nixos/profiles/users/louis-full.nix>
-      # - <https://github.com/dnr/sample-nix-code/blob/03494480c1fae550c033aa54fd96aeb3827761c5/nixos/laptop.nix>
-      pamMount = let
-        priv = config.fileSystems."/home/colin/private";
-      in {
-        fstype = priv.fsType;
-        path = priv.device;
-        mountpoint = priv.mountPoint;
-        options = builtins.concatStringsSep "," priv.options;
-      };
-    };
-
-    security.pam.mount.enable = true;
-
-    # ensure ~ perms are known to sane.fs module.
-    # TODO: this is generic enough to be lifted up into sane.fs itself.
-    sane.fs."/home/colin".dir.acl = {
-      user = "colin";
-      group = config.users.users.colin.group;
-      mode = config.users.users.colin.homeMode;
-    };
-
-    sane.persist.home.plaintext = [
-      "archive"
-      "dev"
-      # TODO: records should be private
-      "records"
-      "ref"
-      "tmp"
-      "use"
-      "Music"
-      "Pictures"
-      "Videos"
-
-      ".cargo"
-      ".rustup"
-    ];
-
-    # convenience
-    sane.fs."/home/colin/knowledge" = fs.wantedSymlinkTo "/home/colin/private/knowledge";
-    sane.fs."/home/colin/nixos" = fs.wantedSymlinkTo "/home/colin/dev/nixos";
-    sane.fs."/home/colin/Videos/servo" = fs.wantedSymlinkTo "/mnt/servo-media/Videos";
-    sane.fs."/home/colin/Videos/servo-incomplete" = fs.wantedSymlinkTo "/mnt/servo-media/incomplete";
-    sane.fs."/home/colin/Music/servo" = fs.wantedSymlinkTo "/mnt/servo-media/Music";
-
-    # used by password managers, e.g. unix `pass`
-    sane.fs."/home/colin/.password-store" = fs.wantedSymlinkTo "/home/colin/knowledge/secrets/accounts";
-
-    sane.persist.sys.plaintext = mkIf cfg.guest.enable [
-      # intentionally allow other users to write to the guest folder
-      { directory = "/home/guest"; user = "guest"; group = "users"; mode = "0775"; }
-    ];
-    users.users.guest = mkIf cfg.guest.enable {
-      isNormalUser = true;
-      home = "/home/guest";
-      subUidRanges = [
-        { startUid=200000; count=1; }
-      ];
-      group = "users";
-      initialPassword = lib.mkDefault "";
-      shell = pkgs.zsh;
-      openssh.authorizedKeys.keys = [
-        # TODO: insert pubkeys that should be allowed in
-      ];
-    };
-
-    security.sudo = {
-      enable = true;
-      wheelNeedsPassword = false;
-    };
-
-    services.openssh = {
-      enable = true;
-      permitRootLogin = "no";
-      passwordAuthentication = false;
-    };
-  };
-}

hosts/common/vpn.nix

@@ -1,66 +0,0 @@
-{ config, lib, ... }:
-
-# to add a new OVPN VPN:
-# - generate a privkey `wg genkey`
-# - add this key to `sops secrets/universal.yaml`
-# - upload pubkey to OVPN.com
-# - generate config @ OVPN.com
-# - copy the Address, PublicKey, Endpoint from OVPN's config
-# N.B.: maximum interface name in Linux is 15 characters.
-let
-  def-ovpn = name: { endpoint, publicKey, address }: {
-    networking.wg-quick.interfaces."ovpnd-${name}" = {
-      inherit address;
-      privateKeyFile = config.sops.secrets."wg_ovpnd_${name}_privkey".path;
-      dns = [
-        "46.227.67.134"
-        "192.165.9.158"
-      ];
-      peers = [
-        {
-          allowedIPs = [
-            "0.0.0.0/0"
-            "::/0"
-          ];
-          inherit endpoint publicKey;
-        }
-      ];
-      # to start: `systemctl start wg-quick-ovpnd-${name}`
-      autostart = false;
-    };
-  };
-in lib.mkMerge [
-  (def-ovpn "us" {
-    endpoint = "vpn31.prd.losangeles.ovpn.com:9929";
-    publicKey = "VW6bEWMOlOneta1bf6YFE25N/oMGh1E1UFBCfyggd0k=";
-    address = [
-      "172.27.237.218/32"
-      "fd00:0000:1337:cafe:1111:1111:ab00:4c8f/128"
-    ];
-  })
-  # NB: us-* share the same wg key and link-local addrs, but distinct public addresses
-  (def-ovpn "us-atl" {
-    endpoint = "vpn18.prd.atlanta.ovpn.com:9929";
-    publicKey = "Dpg/4v5s9u0YbrXukfrMpkA+XQqKIFpf8ZFgyw0IkE0=";
-    address = [
-      "172.21.182.178/32"
-      "fd00:0000:1337:cafe:1111:1111:cfcb:27e3/128"
-    ];
-  })
-  (def-ovpn "us-mi" {
-    endpoint = "vpn34.prd.miami.ovpn.com:9929";
-    publicKey = "VtJz2irbu8mdkIQvzlsYhU+k9d55or9mx4A2a14t0V0=";
-    address = [
-      "172.21.182.178/32"
-      "fd00:0000:1337:cafe:1111:1111:cfcb:27e3/128"
-    ];
-  })
-  (def-ovpn "ukr" {
-    endpoint = "vpn96.prd.kyiv.ovpn.com:9929";
-    publicKey = "CjZcXDxaaKpW8b5As1EcNbI6+42A6BjWahwXDCwfVFg=";
-    address = [
-      "172.18.180.159/32"
-      "fd00:0000:1337:cafe:1111:1111:ec5c:add3/128"
-    ];
-  })
-]

hosts/desko/default.nix

@@ -1,60 +0,0 @@
-{ config, pkgs, ... }:
-{
-  imports = [
-    ./fs.nix
-  ];
-
-  # sane.packages.enableDevPkgs = true;
-
-  sane.gui.sway.enable = true;
-  sane.services.duplicity.enable = true;
-  sane.services.nixserve.enable = true;
-  sane.services.nixserve.sopsFile = ../../secrets/desko.yaml;
-  sane.persist.enable = true;
-
-  boot.loader.efi.canTouchEfiVariables = false;
-  sane.image.extraBootFiles = [ pkgs.bootpart-uefi-x86_64 ];
-
-  # needed to use libimobiledevice/ifuse, for iphone sync
-  services.usbmuxd.enable = true;
-
-  sops.secrets.colin-passwd = {
-    sopsFile = ../../secrets/desko.yaml;
-    neededForUsers = true;
-  };
-
-  # don't enable wifi by default: it messes with connectivity.
-  systemd.services.iwd.enable = false;
-
-  # default config: https://man.archlinux.org/man/snapper-configs.5
-  # defaults to something like:
-  #   - hourly snapshots
-  #   - auto cleanup; keep the last 10 hourlies, last 10 daylies, last 10 monthlys.
-  services.snapper.configs.nix = {
-    # TODO: for the impermanent setup, we'd prefer to just do /nix/persist,
-    # but that also requires setting up the persist dir as a subvol
-    subvolume = "/nix";
-    # TODO: ALLOW_USERS doesn't seem to work. still need `sudo snapper -c nix list`
-    extraConfig = ''
-      ALLOW_USERS = "colin";
-    '';
-  };
-
-  sops.secrets.duplicity_passphrase = {
-    sopsFile = ../../secrets/desko.yaml;
-  };
-
-  programs.steam = {
-    enable = true;
-    # not sure if needed: stole this whole snippet from the wiki
-    remotePlay.openFirewall = true; # Open ports in the firewall for Steam Remote Play
-    dedicatedServer.openFirewall = true; # Open ports in the firewall for Source Dedicated Server
-  };
-  sane.persist.home.plaintext = [
-    ".steam"
-    ".local/share/Steam"
-  ];
-
-  # docs: https://nixos.org/manual/nixos/stable/options.html#opt-system.stateVersion
-  system.stateVersion = "21.05";
-}

hosts/desko/fs.nix

@@ -1,31 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.root-on-tmpfs = true;
-  # we need a /tmp for building large nix things.
-  # a cross-compiled kernel, particularly, will easily use 30+GB of tmp
-  fileSystems."/tmp" = {
-    device = "none";
-    fsType = "tmpfs";
-    options = [
-      "mode=777"
-      "size=64G"
-      "defaults"
-    ];
-  };
-  fileSystems."/nix" = {
-    # device = "/dev/disk/by-uuid/985a0a32-da52-4043-9df7-615adec2e4ff";
-    device = "/dev/disk/by-uuid/0ab0770b-7734-4167-88d9-6e4e20bb2a56";
-    fsType = "btrfs";
-    options = [
-      "compress=zstd"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/boot" = {
-    # device = "/dev/disk/by-uuid/CAA7-E7D2";
-    device = "/dev/disk/by-uuid/41B6-BAEF";
-    fsType = "vfat";
-  };
-}

hosts/instantiate.nix

@@ -1,23 +0,0 @@
-# trampoline from flake.nix into the specific host definition, while doing a tiny bit of common setup
-
-{ hostName, localSystem }:
-{ ... }:
-
-{
-  imports = [
-    ./${hostName}
-    ./common
-  ];
-
-  networking.hostName = hostName;
-
-  nixpkgs.overlays = [
-    (next: prev: {
-      # for local != target we by default just emulate the target while building.
-      # provide a `pkgs.cross.<pkg>` alias that consumers can use instead of `pkgs.<foo>`
-      # to explicitly opt into non-emulated cross compilation for any specific package.
-      # this is most beneficial for large packages with few pre-requisites -- like Linux.
-      cross = next.crossFrom."${localSystem}";
-    })
-  ];
-}

hosts/lappy/default.nix

@@ -1,36 +0,0 @@
-{ pkgs, ... }:
-{
-  imports = [
-    ./fs.nix
-  ];
-
-  # sane.packages.enableDevPkgs = true;
-
-  # sane.users.guest.enable = true;
-  sane.gui.sway.enable = true;
-  sane.persist.enable = true;
-  sane.nixcache.enable = true;
-  boot.loader.efi.canTouchEfiVariables = false;
-  sane.image.extraBootFiles = [ pkgs.bootpart-uefi-x86_64 ];
-
-  sops.secrets.colin-passwd = {
-    sopsFile = ../../secrets/lappy.yaml;
-    neededForUsers = true;
-  };
-
-  # default config: https://man.archlinux.org/man/snapper-configs.5
-  # defaults to something like:
-  #   - hourly snapshots
-  #   - auto cleanup; keep the last 10 hourlies, last 10 daylies, last 10 monthlys.
-  services.snapper.configs.nix = {
-    # TODO: for the impermanent setup, we'd prefer to just do /nix/persist,
-    # but that also requires setting up the persist dir as a subvol
-    subvolume = "/nix";
-  };
-
-  # TODO: only here for debugging
-  # services.ipfs.enable = true;
-
-  # docs: https://nixos.org/manual/nixos/stable/options.html#opt-system.stateVersion
-  system.stateVersion = "21.05";
-}

hosts/lappy/fs.nix

@@ -1,48 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.root-on-tmpfs = true;
-  # we need a /tmp of default size (half RAM) for building large nix things
-  fileSystems."/tmp" = {
-    device = "none";
-    fsType = "tmpfs";
-    options = [
-      "mode=777"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/nix" = {
-    device = "/dev/disk/by-uuid/75230e56-2c69-4e41-b03e-68475f119980";
-    fsType = "btrfs";
-    options = [
-      "compress=zstd"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/BD79-D6BB";
-    fsType = "vfat";
-  };
-
-  # fileSystems."/nix" = {
-  #   device = "/dev/disk/by-uuid/5a7fa69c-9394-8144-a74c-6726048b129f";
-  #   fsType = "btrfs";
-  # };
-
-  # fileSystems."/boot" = {
-  #   device = "/dev/disk/by-uuid/4302-1685";
-  #   fsType = "vfat";
-  # };
-
-  # fileSystems."/" = {
-  #   device = "none";
-  #   fsType = "tmpfs";
-  #   options = [
-  #     "mode=755"
-  #     "size=1G"
-  #     "defaults"
-  #   ];
-  # };
-}

hosts/moby/default.nix

@@ -1,89 +0,0 @@
-{ config, pkgs, lib, ... }:
-{
-  imports = [
-    ./firmware.nix
-    ./fs.nix
-    ./kernel.nix
-  ];
-
-  # cross-compiled documentation is *slow*.
-  # no obvious way to natively compile docs (2022/09/29).
-  # entrypoint is nixos/modules/misc/documentation.nix
-  # doc building happens in nixos/doc/manual/default.nix
-  # TODO: we could *maybe* inject pkgs.buildPackages.xyz = cross.buildPackages.xyz?
-  documentation.nixos.enable = false;
-
-  # XXX colin: phosh doesn't work well with passwordless login,
-  # so set this more reliable default password should anything go wrong
-  users.users.colin.initialPassword = "147147";
-  services.getty.autologinUser = "root";  # allows for emergency maintenance?
-
-  sops.secrets.colin-passwd = {
-    sopsFile = ../../secrets/moby.yaml;
-    neededForUsers = true;
-  };
-
-  # usability compromises
-  sane.web-browser.persistCache = "private";
-  sane.web-browser.persistData = "private";
-  sane.persist.home.plaintext = [
-    ".config/pulse"  # persist pulseaudio volume
-  ];
-
-  # sane.packages.enableGuiPkgs = false;  # XXX faster builds/imaging for debugging
-  sane.packages.extraUserPkgs = [
-    pkgs.plasma5Packages.konsole  # terminal
-  ];
-
-  sane.nixcache.enable = true;
-  sane.persist.enable = true;
-  sane.gui.phosh.enable = true;
-
-  boot.loader.efi.canTouchEfiVariables = false;
-  # /boot space is at a premium. default was 20.
-  # even 10 can be too much
-  # TODO: compress moby kernels!
-  boot.loader.generic-extlinux-compatible.configurationLimit = 8;
-  # mobile.bootloader.enable = false;
-  # mobile.boot.stage-1.enable = false;
-  # boot.initrd.systemd.enable = false;
-  # boot.initrd.services.swraid.enable = false;  # attempt to fix dm_mod stuff
-  # disable proximity sensor.
-  # the filtering/calibration is bad that it causes the screen to go fully dark at times.
-  boot.blacklistedKernelModules = [ "stk3310" ];
-
-  # without this some GUI apps fail: `DRM_IOCTL_MODE_CREATE_DUMB failed: Cannot allocate memory`
-  # this is because they can't allocate enough video ram.
-  # the default CMA seems to be 32M. we could probably get by with as little as 64M, and safely with 128M.
-  # `cat /proc/meminfo` to see CmaTotal/CmaFree if interested in tuning this.
-  boot.kernelParams = [ "cma=256M" ];
-
-  # mobile-nixos' /lib/firmware includes:
-  #   rtl_bt          (bluetooth)
-  #   anx7688-fw.bin  (USB-C -> HDMI bridge)
-  #   ov5640_af.bin   (camera module)
-  # hardware.firmware = [ config.mobile.device.firmware ];
-  hardware.firmware = [ pkgs.rtl8723cs-firmware ];
-
-  system.stateVersion = "21.11";
-
-  # defined: https://www.freedesktop.org/software/systemd/man/machine-info.html
-  # XXX colin: not sure which, if any, software makes use of this
-  environment.etc."machine-info".text = ''
-    CHASSIS="handset"
-  '';
-
-  # enable rotation sensor
-  hardware.sensor.iio.enable = true;
-
-  # from https://gitlab.manjaro.org/manjaro-arm/packages/community/phosh/alsa-ucm-pinephone
-  # mobile-nixos does this same thing, with *slightly different settings*.
-  # i trust manjaro more because the guy maintaining that is actively trying to upstream into alsa-ucm-conf.
-  # an alternative may be to build a custom alsa with the PinePhone config patch applied:
-  # - <https://github.com/alsa-project/alsa-ucm-conf/pull/134>
-  # that would make this be not device-specific
-  environment.variables.ALSA_CONFIG_UCM2 = "${./ucm2}";
-  systemd.services.pulseaudio.environment.ALSA_CONFIG_UCM2 = "${./ucm2}";
-
-  hardware.opengl.driSupport = true;
-}

hosts/moby/firmware.nix

@@ -1,12 +0,0 @@
-{ config, pkgs, ... }:
-{
-  # we need space in the GPT header to place tow-boot.
-  # only actually need 1 MB, but better to over-allocate than under-allocate
-  sane.image.extraGPTPadding = 16 * 1024 * 1024;
-  sane.image.firstPartGap = 0;
-  system.build.img = pkgs.runCommand "nixos_full-disk-image.img" {} ''
-    cp -v ${config.system.build.img-without-firmware}/nixos.img $out
-    chmod +w $out
-    dd if=${pkgs.tow-boot-pinephone}/Tow-Boot.noenv.bin of=$out bs=1024 seek=8 conv=notrunc
-  '';
-}

hosts/moby/fs.nix

@@ -1,18 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.root-on-tmpfs = true;
-  fileSystems."/nix" = {
-    device = "/dev/disk/by-uuid/1f1271f8-53ce-4081-8a29-60a4a6b5d6f9";
-    fsType = "btrfs";
-    options = [
-      "compress=zstd"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/0299-F1E5";
-    fsType = "vfat";
-  };
-}

hosts/moby/kernel.nix

@@ -1,143 +0,0 @@
-{ lib, pkgs, ... }:
-let
-  # use the last commit on the 5.18 branch (5.18.14)
-  # manjaro's changes between kernel patch versions tend to be minimal if any.
-  manjaroBase = "https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/raw/25bd828cd47b1c6e09fcbcf394a649b89d2876dd";
-  manjaroPatch = name: sha256: {
-    inherit name;
-    patch = pkgs.fetchpatch {
-      inherit name;
-      url = "${manjaroBase}/${name}?inline=false";
-      inherit sha256;
-    };
-  };
-
-  # the idea for patching off Manjaro's kernel comes from jakewaksbaum:
-  # - https://git.sr.ht/~jakewaksbaum/pi/tree/af20aae5653545d6e67a459b59ee3e1ca8a680b0/item/kernel/default.nix
-  # - he later abandoned this, i think because he's using the Pinephone Pro which received mainline support.
-  manjaroPatches = [
-    (manjaroPatch
-      "1001-arm64-dts-allwinner-add-hdmi-sound-to-pine-devices.patch"
-      "sha256-DApd791A+AxB28Ven/MVAyuyVphdo8KQDx8O7oxVPnc="
-    )
-    # these patches below are critical to enable wifi (RTL8723CS)
-    # - the alternative is a wholly forked kernel by megi/megous:
-    #   - https://xnux.eu/howtos/build-pinephone-kernel.html#toc-how-to-build-megi-s-pinehpone-kernel
-    # - i don't know if these patches are based on megi's or original
-    (manjaroPatch
-      "2001-Bluetooth-Add-new-quirk-for-broken-local-ext-features.patch"
-      "sha256-CExhJuUWivegxPdnzKINEsKrMFx/m/1kOZFmlZ2SEOc="
-    )
-    (manjaroPatch
-      "2002-Bluetooth-btrtl-add-support-for-the-RTL8723CS.patch"
-      "sha256-dDdvOphTcP/Aog93HyH+L9m55laTgtjndPSE4/rnzUA="
-    )
-    (manjaroPatch
-      "2004-arm64-dts-allwinner-enable-bluetooth-pinetab-pinepho.patch"
-      "sha256-o43P3WzXyHK1PF+Kdter4asuyGAEKO6wf5ixcco2kCQ="
-    )
-    # XXX: this one has a Makefile, which hardcodes /sbin/depmod:
-    # - drivers/staging/rtl8723cs/Makefile
-    # - not sure if this is problematic?
-    (manjaroPatch
-      "2005-staging-add-rtl8723cs-driver.patch"
-      "sha256-6ywm3dQQ5JYl60CLKarxlSUukwi4QzqctCj3tVgzFbo="
-    )
-  ];
-
-  # pinephone uses the linux dtb at arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-  # - this includes sun50i-a64.dtsi
-  # - and sun50i-a64-cpu-opp.dtsi
-  # - no need to touch the allwinner-h6 stuff: that's the SBC pine product
-  # - i think it's safe to ignore sun9i stuff, but i don't know what it is
-  kernelConfig = with lib.kernel; {
-    # NB: nix adds the CONFIG_ prefix to each of these.
-    # if you add the prefix yourself nix will IGNORE YOUR CONFIG.
-    RTL8723CS = module;
-    BT_HCIUART_3WIRE = yes;
-    BT_HCIUART_RTL = yes;
-    RTL8XXXU_UNTESTED = yes;
-    BT_BNEP_MC_FILTER = yes;
-    BT_BNEP_PROTO_FILTER = yes;
-    BT_HS = yes;
-    BT_LE = yes;
-    # relevant configs inherited from nixos defaults (or above additions):
-    # CONFIG_BT=m
-    # CONFIG_BT_BREDR=y
-    # CONFIG_BT_RFCOMM=m
-    # CONFIG_BT_RFCOMM_TTY=y
-    # CONFIG_BT_BNEP=m
-    # CONFIG_BT_HIDP=m
-    # CONFIG_BT_RTL=m
-    # CONFIG_BT_HCIBTUSB=m
-    # CONFIG_BT_HCIBTUSB_BCM=y
-    # CONFIG_BT_HCIBTUSB_RTL=y
-    # CONFIG_BT_HCIUART=m
-    # CONFIG_BT_HCIUART_SERDEV=y
-    # CONFIG_BT_HCIUART_H4=y
-    # CONFIG_BT_HCIUART_LL=y
-    # CONFIG_RTL_CARDS=m
-    # CONFIG_RTLWIFI=m
-    # CONFIG_RTLWIFI_PCI=m
-    # CONFIG_RTLWIFI_USB=m
-    # CONFIG_RTLWIFI_DEBUG=y
-    # CONFIG_RTL8723_COMMON=m
-    # CONFIG_RTLBTCOEXIST=m
-    # CONFIG_RTL8XXXU=m
-    # CONFIG_RTLLIB=m
-    # consider adding (from mobile-nixos):
-    # maybe: CONFIG_BT_HCIUART_3WIRE=y
-    # maybe: CONFIG_BT_HCIUART_RTL=y
-    # maybe: CONFIG_RTL8XXXU_UNTESTED=y
-    # consider adding (from manjaro):
-    # CONFIG_BT_6LOWPAN=m  (not listed as option in nixos kernel)
-    # these are referenced in the rtl8723 source, but not known to config (and not in mobile-nixos config
-    # maybe: CONFIG_RTL_ODM_WLAN_DRIVER
-    # maybe: CONFIG_RTL_TRIBAND_SUPPORT
-    # maybe: CONFIG_SDIO_HCI
-    # maybe: CONFIG_USB_HCI
-  };
-
-  # create a kernelPatch which overrides nixos' defconfig with extra options
-  patchDefconfig = config: {
-    # defconfig options. this method comes from here:
-    # - https://discourse.nixos.org/t/the-correct-way-to-override-the-latest-kernel-config/533/9
-    name = "sane-moby-defconfig";
-    patch = null;
-    extraStructuredConfig = config;
-  };
-in
-{
-  # use Megi's kernel:
-  # even with the Manjaro patches, stock 5.18 has a few issues on Pinephone:
-  # - no battery charging
-  # - phone rotation sensor is off by 90 degrees
-  # - ambient light sensor causes screen brightness to be shakey
-  # - phosh greeter may not appear after wake from sleep
-  boot.kernelPackages = pkgs.cross.linuxPackagesFor pkgs.cross.linux-megous;
-
-  boot.kernelPatches = [
-    (patchDefconfig (kernelConfig //
-      (with lib.kernel; {
-        # disabling the sun5i_eink driver avoids this compilation error:
-        # CC [M]  drivers/video/fbdev/sun5i-eink-neon.o
-        # aarch64-unknown-linux-gnu-gcc: error: unrecognized command line option '-mfloat-abi=softfp'
-        # aarch64-unknown-linux-gnu-gcc: error: unrecognized command line option '-mfpu=neon'
-        # make[3]: *** [../scripts/Makefile.build:289: drivers/video/fbdev/sun5i-eink-neon.o] Error 1
-        FB_SUN5I_EINK = no;
-      })
-    ))
-  ];
-
-  # alternatively, use nixos' kernel and add the stuff we want:
-  # # cross-compilation optimization:
-  # boot.kernelPackages =
-  #   let p = (import nixpkgs { localSystem = "x86_64-linux"; });
-  #   in p.pkgsCross.aarch64-multiplatform.linuxPackages_5_18;
-  # # non-cross:
-  # # boot.kernelPackages = pkgs.linuxPackages_5_18;
-
-  # boot.kernelPatches = manjaroPatches ++ [
-  #   (patchDefconfig kernelConfig)
-  # ];
-}

hosts/moby/ucm2/PinePhone/HiFi.conf

@@ -1,148 +0,0 @@
-SectionVerb {
-	EnableSequence [
-		cset "name='Headphone Playback Switch' off"
-		cset "name='Headphone Source Playback Route' DAC"
-		cset "name='Line In Playback Switch' off"
-		cset "name='Line Out Playback Switch' off"
-		cset "name='Line Out Source Playback Route' Mono Differential"
-		cset "name='Mic1 Playback Switch' off"
-		cset "name='Mic2 Playback Switch' off"
-		cset "name='AIF1 DA0 Playback Volume' 160"
-		cset "name='AIF3 ADC Source Capture Route' None"
-		cset "name='AIF2 DAC Source Playback Route' AIF2"
-		cset "name='DAC Playback Switch' on"
-		cset "name='DAC Playback Volume' 160"
-		cset "name='ADC Digital DAC Playback Switch' off"
-		cset "name='AIF1 Slot 0 Digital DAC Playback Switch' on"
-		cset "name='AIF2 Digital DAC Playback Switch' off"
-		cset "name='DAC Reversed Playback Switch' off"
-		cset "name='Earpiece Playback Switch' off"
-		cset "name='Earpiece Source Playback Route' DACL"
-
-		cset "name='Line In Capture Switch' off"
-		cset "name='Mic1 Capture Switch' off"
-		cset "name='Mic1 Boost Volume' 7"
-		cset "name='Mic2 Capture Switch' off"
-		cset "name='Mic2 Boost Volume' 7"
-		cset "name='Mixer Capture Switch' off"
-		cset "name='Mixer Reversed Capture Switch' off"
-		cset "name='ADC Capture Volume' 160"
-		cset "name='ADC Gain Capture Volume' 7"
-		cset "name='AIF1 AD0 Capture Volume' 160"
-		cset "name='AIF1 Data Digital ADC Capture Switch' on"
-		cset "name='AIF2 ADC Mixer ADC Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF2 DAC Rev Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-	]
-
-        DisableSequence [
-        ]
-
-	Value {
-	}
-}
-
-SectionDevice."Speaker" {
-	Comment "Internal speaker"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Mix Mono"
-		cset "name='Line Out Playback Switch' on"
-		cset "name='Line Out Playback Volume' 100%"
-	]
-
-	DisableSequence [
-		cset "name='Line Out Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Line Out Playback Volume"
-		PlaybackSwitch "Line Out Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 300
-		PlaybackPCM "hw:${CardId},0"
-	}
-}
-SectionDevice."Earpiece" {
-	Comment "Internal Earpiece"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Mix Mono"
-		cset "name='Earpiece Playback Switch' on"
-		cset "name='Earpiece Playback Volume' 100%"
-	]
-
-	DisableSequence [
-		cset "name='Earpiece Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Earpiece Playback Volume"
-		PlaybackSwitch "Earpiece Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 200
-		PlaybackPCM "hw:${CardId},0"
-	}
-}
-SectionDevice."Mic" {
-	Comment "Internal Microphone"
-	ConflictingDevice [
-		"Headset"
-	]
-	EnableSequence [
-		cset "name='Mic1 Capture Switch' on"
-	]
-	DisableSequence [
-		cset "name='Mic1 Capture Switch' off"
-	]
-	Value {
-		CapturePriority 100
-		CapturePCM "hw:${CardId},0"
-		CaptureChannels 2
-		CaptureMixerElem "ADC"
-		CaptureVolume "ADC Capture Volume"
-		CaptureSwitch "Mic1 Capture Switch"
-	}
-}
-SectionDevice."Headset" {
-	Comment "Headset Microphone"
-	ConflictingDevice [
-		"Mic"
-	]
-	EnableSequence [
-		cset "name='Mic2 Capture Switch' on"
-	]
-	DisableSequence [
-		cset "name='Mic2 Capture Switch' off"
-	]
-	Value {
-		CapturePriority 500
-		CapturePCM "hw:${CardId},0"
-		CaptureChannels 2
-		CaptureMixerElem "ADC"
-		CaptureVolume "ADC Capture Volume"
-		CaptureSwitch "Mic2 Capture Switch"
-		JackControl "Headset Microphone Jack"
-	}
-}
-SectionDevice."Headphones" {
-	Comment "Headphones"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Stereo"
-		cset "name='Headphone Playback Switch' on"
-		cset "name='Headphone Playback Volume' 70%"
-	]
-
-	DisableSequence [
-		cset "name='Headphone Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Headphone Playback Volume"
-		PlaybackSwitch "Headphone Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 500
-		PlaybackPCM "hw:${CardId},0"
-		JackControl "Headphone Jack"
-	}
-}

hosts/moby/ucm2/PinePhone/PinePhone.conf

@@ -1,11 +0,0 @@
-Syntax 2
-
-SectionUseCase."HiFi" {
-	File "HiFi.conf"
-	Comment "Default"
-}
-
-SectionUseCase."Voice Call" {
-	File "VoiceCall.conf"
-	Comment "Phone call"
-}

hosts/moby/ucm2/PinePhone/VoiceCall.conf

@@ -1,153 +0,0 @@
-SectionVerb {
-	EnableSequence [
-		cset "name='Headphone Playback Switch' off"
-		cset "name='Headphone Source Playback Route' DAC"
-		cset "name='Line In Playback Switch' off"
-		cset "name='Line Out Playback Switch' off"
-		cset "name='Line Out Source Playback Route' Mono Differential"
-		cset "name='Mic1 Playback Switch' off"
-		cset "name='Mic2 Playback Switch' off"
-		cset "name='AIF1 DA0 Playback Volume' 160"
-		cset "name='AIF2 DAC Playback Volume' 160"
-		cset "name='AIF3 ADC Source Capture Route' None"
-		cset "name='AIF2 DAC Source Playback Route' AIF2"
-		cset "name='DAC Playback Switch' on"
-		cset "name='DAC Playback Volume' 160"
-		cset "name='ADC Digital DAC Playback Switch' off"
-		cset "name='AIF1 Slot 0 Digital DAC Playback Switch' on"
-		cset "name='AIF2 Digital DAC Playback Switch' on"
-		cset "name='DAC Reversed Playback Switch' off"
-		cset "name='Earpiece Playback Switch' off"
-		cset "name='Earpiece Source Playback Route' DACL"
-
-		cset "name='Line In Capture Switch' off"
-		cset "name='Mic1 Capture Switch' off"
-		cset "name='Mic1 Boost Volume' 0"
-		cset "name='Mic1 Playback Volume' 7"
-		cset "name='Mic2 Capture Switch' off"
-		cset "name='Mic2 Boost Volume' 0"
-		cset "name='Mic2 Playback Volume' 7"
-		cset "name='Mixer Capture Switch' off"
-		cset "name='Mixer Reversed Capture Switch' off"
-		cset "name='ADC Capture Volume' 160"
-		cset "name='ADC Gain Capture Volume' 7"
-		cset "name='AIF1 AD0 Capture Volume' 160"
-		cset "name='AIF1 Data Digital ADC Capture Switch' on"
-		cset "name='AIF2 ADC Capture Volume' 160"
-		cset "name='AIF2 ADC Mixer ADC Capture Switch' on"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF2 DAC Rev Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-		cset "name='AIF2 ADC Mixer AIF1 DA0 Capture Switch' off"
-	]
-
-        DisableSequence [
-        ]
-
-	Value {
-		PlaybackRate 8000
-	}
-}
-
-SectionDevice."Speaker" {
-	Comment "Internal speaker"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Mix Mono"
-		cset "name='Line Out Playback Switch' on"
-		cset "name='Line Out Playback Volume' 100%"
-	]
-
-	DisableSequence [
-		cset "name='Line Out Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Line Out Playback Volume"
-		PlaybackSwitch "Line Out Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 300
-		PlaybackPCM "hw:${CardId},0"
-	}
-}
-SectionDevice."Earpiece" {
-	Comment "Internal Earpiece"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Mix Mono"
-		cset "name='Earpiece Playback Switch' on"
-		cset "name='Earpiece Playback Volume' 100%"
-	]
-
-	DisableSequence [
-		cset "name='Earpiece Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Earpiece Playback Volume"
-		PlaybackSwitch "Earpiece Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 500
-		PlaybackPCM "hw:${CardId},0"
-	}
-}
-SectionDevice."Mic" {
-	Comment "Internal Microphone"
-	ConflictingDevice [
-		"Headset"
-	]
-	EnableSequence [
-		cset "name='Mic1 Capture Switch' on"
-	]
-	DisableSequence [
-		cset "name='Mic1 Capture Switch' off"
-	]
-	Value {
-		CapturePriority 200
-		CapturePCM "hw:${CardId},0"
-		CaptureMixerElem "ADC"
-		CaptureVolume "ADC Capture Volume"
-		CaptureSwitch "Mic1 Capture Switch"
-		CaptureChannels 2
-	}
-}
-SectionDevice."Headset" {
-	Comment "Headset Microphone"
-	ConflictingDevice [
-		"Mic"
-	]
-	EnableSequence [
-		cset "name='Mic2 Capture Switch' on"
-	]
-	DisableSequence [
-		cset "name='Mic2 Capture Switch' off"
-	]
-	Value {
-		CapturePriority 500
-		CapturePCM "hw:${CardId},0"
-		CaptureChannels 2
-		CaptureMixerElem "ADC"
-		CaptureVolume "ADC Capture Volume"
-		CaptureSwitch "Mic2 Capture Switch"
-		JackControl "Headset Microphone Jack"
-	}
-}
-SectionDevice."Headphones" {
-	Comment "Headphones"
-	EnableSequence [
-		cset "name='AIF1 DA0 Stereo Playback Route' Stereo"
-		cset "name='Headphone Playback Switch' on"
-		cset "name='Headphone Playback Volume' 100%"
-	]
-
-	DisableSequence [
-		cset "name='Headphone Playback Switch' off"
-	]
-
-	Value {
-		PlaybackVolume "Headphone Playback Volume"
-		PlaybackSwitch "Headphone Playback Switch"
-		PlaybackChannels 2
-		PlaybackPriority 500
-		PlaybackPCM "hw:${CardId},0"
-		JackControl "Headphone Jack"
-	}
-}

hosts/moby/ucm2/ucm.conf

@@ -1,8 +0,0 @@
-Syntax 3
-
-UseCasePath {
-	legacy {
-		Directory "PinePhone"
-		File "PinePhone.conf"
-	}
-}

hosts/rescue/default.nix

@@ -1,13 +0,0 @@
-{ config, pkgs, ... }:
-{
-  imports = [
-    ./fs.nix
-  ];
-
-  boot.loader.generic-extlinux-compatible.enable = true;
-  boot.loader.efi.canTouchEfiVariables = false;
-  sane.image.extraBootFiles = [ pkgs.bootpart-uefi-x86_64 ];
-
-  # docs: https://nixos.org/manual/nixos/stable/options.html#opt-system.stateVersion
-  system.stateVersion = "21.05";
-}

hosts/rescue/fs.nix

@@ -1,12 +0,0 @@
-{ ... }:
-
-{
-  fileSystems."/" = {
-    device = "/dev/disk/by-uuid/44445555-6666-7777-8888-999900001111";
-    fsType = "ext4";
-  };
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/2222-3333";
-    fsType = "vfat";
-  };
-}

hosts/servo/default.nix

@@ -1,41 +0,0 @@
-{ pkgs, ... }:
-
-{
-  imports = [
-    ./fs.nix
-    ./net.nix
-    ./users.nix
-    ./services
-  ];
-
-  sane.packages.extraUserPkgs = [
-    # for administering services
-    pkgs.matrix-synapse
-    pkgs.freshrss
-  ];
-  sane.persist.enable = true;
-  sane.services.dyn-dns.enable = true;
-  # sane.services.duplicity.enable = true;  # TODO: re-enable after HW upgrade
-
-  boot.loader.efi.canTouchEfiVariables = false;
-  sane.image.extraBootFiles = [ pkgs.bootpart-uefi-x86_64 ];
-
-  sops.secrets.duplicity_passphrase = {
-    sopsFile = ../../secrets/servo.yaml;
-  };
-
-  # both transmission and ipfs try to set different net defaults.
-  # we just use the most aggressive of the two here:
-  boot.kernel.sysctl = {
-    "net.core.rmem_max" = 4194304;  # 4MB
-  };
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "21.11";
-}
-

hosts/servo/fs.nix

@@ -1,93 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.root-on-tmpfs = true;
-  # we need a /tmp for building large nix things
-  fileSystems."/tmp" = {
-    device = "none";
-    fsType = "tmpfs";
-    options = [
-      "mode=777"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/nix" = {
-    device = "/dev/disk/by-uuid/cc81cca0-3cc7-4d82-a00c-6243af3e7776";
-    fsType = "btrfs";
-    options = [
-      "compress=zstd"
-      "defaults"
-    ];
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/6EE3-4171";
-    fsType = "vfat";
-  };
-
-  # slow, external storage (for archiving, etc)
-  fileSystems."/mnt/persist/ext" = {
-    device = "/dev/disk/by-uuid/aa272cff-0fcc-498e-a4cb-0d95fb60631b";
-    fsType = "btrfs";
-    options = [
-      "compress=zstd"
-      "defaults"
-    ];
-  };
-
-  sane.persist.stores."ext" = {
-    origin = "/mnt/persist/ext/persist";
-    storeDescription = "external HDD storage";
-  };
-  sane.fs."/mnt/persist/ext".mount = {};
-
-  sane.persist.sys.plaintext = [
-    # TODO: this is overly broad; only need media and share directories to be persisted
-    { user = "colin"; group = "users"; directory = "/var/lib/uninsane"; }
-  ];
-  # make sure large media is stored to the HDD
-  sane.persist.sys.ext = [
-    {
-      user = "colin";
-      group = "users";
-      mode = "0777";
-      directory = "/var/lib/uninsane/media/Videos";
-    }
-    {
-      user = "colin";
-      group = "users";
-      mode = "0777";
-      directory = "/var/lib/uninsane/media/freeleech";
-    }
-  ];
-
-  # in-memory compressed RAM (seems to be dynamically sized)
-  # zramSwap = {
-  #   enable = true;
-  # };
-
-  # btrfs doesn't easily support swapfiles
-  # swapDevices = [
-  #   { device = "/nix/persist/swapfile"; size = 4096; }
-  # ];
-
-  # this can be a partition. create with:
-  #   fdisk <dev>
-  #     n
-  #     <default partno>
-  #     <start>
-  #     <end>
-  #     t
-  #     <partno>
-  #     19  # set part type to Linux swap
-  #     w   # write changes
-  #   mkswap -L swap <part>
-  # swapDevices = [
-  #   {
-  #     label = "swap";
-  #     # TODO: randomEncryption.enable = true;
-  #   }
-  # ];
-}
-

hosts/servo/net.nix

@@ -1,212 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  networking.domain = "uninsane.org";
-
-  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
-  # Per-interface useDHCP will be mandatory in the future, so this generated config
-  # replicates the default behaviour.
-  networking.useDHCP = false;
-  networking.interfaces.eth0.useDHCP = true;
-  # XXX colin: probably don't need this. wlan0 won't be populated unless i touch a value in networking.interfaces.wlan0
-  networking.wireless.enable = false;
-
-  # networking.firewall.enable = false;
-  networking.firewall.enable = true;
-
-  # this is needed to forward packets from the VPN to the host
-  boot.kernel.sysctl."net.ipv4.ip_forward" = 1;
-
-  # unless we add interface-specific settings for each VPN, we have to define nameservers globally.
-  # networking.nameservers = [
-  #   "1.1.1.1"
-  #   "9.9.9.9"
-  # ];
-
-  # use systemd's stub resolver.
-  # /etc/resolv.conf isn't sophisticated enough to use different servers per net namespace (or link).
-  # instead, running the stub resolver on a known address in the root ns lets us rewrite packets
-  # in the ovnps namespace to use the provider's DNS resolvers.
-  # a weakness is we can only query 1 NS at a time (unless we were to clone the packets?)
-  # there also seems to be some cache somewhere that's shared between the two namespaces.
-  # i think this is a libc thing. might need to leverage proper cgroups to _really_ kill it.
-  # - getent ahostsv4 www.google.com
-  # - try fix: <https://serverfault.com/questions/765989/connect-to-3rd-party-vpn-server-but-dont-use-it-as-the-default-route/766290#766290>
-  services.resolved.enable = true;
-  networking.nameservers = [
-    # use systemd-resolved resolver
-    # full resolver (which understands /etc/hosts) lives on 127.0.0.53
-    # stub resolver (just forwards upstream) lives on 127.0.0.54
-    "127.0.0.53"
-  ];
-
-  # nscd -- the Name Service Caching Daemon -- caches DNS query responses
-  # in a way that's unaware of my VPN routing, so routes are frequently poor against
-  # services which advertise different IPs based on geolocation.
-  # nscd claims to be usable without a cache, but in practice i can't get it to not cache!
-  # nsncd is the Name Service NON-Caching Daemon. it's a drop-in that doesn't cache;
-  # this is OK on the host -- because systemd-resolved caches. it's probably sub-optimal
-  # in the netns and we query upstream DNS more often than needed. hm.
-  # TODO: run a separate recursive resolver in each namespace.
-  services.nscd.enableNsncd = true;
-
-  # services.resolved.extraConfig = ''
-  #   # docs: `man resolved.conf`
-  #   # DNS servers to use via the `wg0` interface.
-  #   #   i hope that from the root ns, these aren't visible.
-  #   DNS=46.227.67.134%wg0 192.165.9.158%wg0
-  #   FallbackDNS=1.1.1.1 9.9.9.9
-  # '';
-
-  # OVPN CONFIG (https://www.ovpn.com):
-  # DOCS: https://nixos.wiki/wiki/WireGuard
-  # if you `systemctl restart wireguard-wg0`, make sure to also restart any other services in `NetworkNamespacePath = .../ovpns`.
-  # TODO: why not create the namespace as a seperate operation (nix config for that?)
-  networking.wireguard.enable = true;
-  networking.wireguard.interfaces.wg0 = let
-    ip = "${pkgs.iproute2}/bin/ip";
-    in-ns = "${ip} netns exec ovpns";
-    iptables = "${pkgs.iptables}/bin/iptables";
-    veth-host-ip = "10.0.1.5";
-    veth-local-ip = "10.0.1.6";
-    vpn-ip = "185.157.162.178";
-    # DNS = 46.227.67.134, 192.165.9.158, 2a07:a880:4601:10f0:cd45::1, 2001:67c:750:1:cafe:cd45::1
-    vpn-dns = "46.227.67.134";
-  in {
-    privateKeyFile = config.sops.secrets.wg_ovpns_privkey.path;
-    # wg is active only in this namespace.
-    # run e.g. ip netns exec ovpns <some command like ping/curl/etc, it'll go through wg>
-    #   sudo ip netns exec ovpns ping www.google.com
-    interfaceNamespace = "ovpns";
-    ips = [
-      "185.157.162.178/32"
-    ];
-    peers = [
-      {
-        publicKey = "SkkEZDCBde22KTs/Hc7FWvDBfdOCQA4YtBEuC3n5KGs=";
-        endpoint = "185.157.162.10:9930";
-        # alternatively: use hostname, but that presents bootstrapping issues (e.g. if host net flakes)
-        # endpoint = "vpn36.prd.amsterdam.ovpn.com:9930";
-        allowedIPs = [ "0.0.0.0/0" ];
-        # nixOS says this is important for keeping NATs active
-        persistentKeepalive = 25;
-        # re-executes wg this often. docs hint that this might help wg notice DNS/hostname changes.
-        # so, maybe that helps if we specify endpoint as a domain name
-        # dynamicEndpointRefreshSeconds = 30;
-        # when refresh fails, try it again after this period instead.
-        # TODO: not avail until nixpkgs upgrade
-        # dynamicEndpointRefreshRestartSeconds = 5;
-      }
-    ];
-    preSetup = "" + ''
-      ${ip} netns add ovpns || echo "ovpns already exists"
-    '';
-    postShutdown = "" + ''
-      ${in-ns} ip link del ovpns-veth-b || echo "couldn't delete ovpns-veth-b"
-      ${ip} link del ovpns-veth-a || echo "couldn't delete ovpns-veth-a"
-      ${ip} netns delete ovpns || echo "couldn't delete ovpns"
-      # restore rules/routes
-      ${ip} rule del from ${veth-host-ip} lookup ovpns pref 50 || echo "couldn't delete init -> ovpns rule"
-      ${ip} route del default via ${veth-local-ip} dev ovpns-veth-a proto kernel src ${veth-host-ip} metric 1002 table ovpns || echo "couldn't delete init -> ovpns route"
-      ${ip} rule add from all lookup local pref 0
-      ${ip} rule del from all lookup local pref 100
-    '';
-    postSetup = "" + ''
-      # DOCS:
-      # - some of this approach is described here: <https://josephmuia.ca/2018-05-16-net-namespaces-veth-nat/>
-      # - iptables primer: <https://danielmiessler.com/study/iptables/>
-      # create veth pair
-      ${ip} link add ovpns-veth-a type veth peer name ovpns-veth-b
-      ${ip} addr add ${veth-host-ip}/24 dev ovpns-veth-a
-      ${ip} link set ovpns-veth-a up
-
-      # mv veth-b into the ovpns namespace
-      ${ip} link set ovpns-veth-b netns ovpns
-      ${in-ns} ip addr add ${veth-local-ip}/24 dev ovpns-veth-b
-      ${in-ns} ip link set ovpns-veth-b up
-
-      # make it so traffic originating from the host side of the veth
-      # is sent over the veth no matter its destination.
-      ${ip} rule add from ${veth-host-ip} lookup ovpns pref 50
-      # for traffic originating at the host veth to the WAN, use the veth as our gateway
-      # not sure if the metric 1002 matters.
-      ${ip} route add default via ${veth-local-ip} dev ovpns-veth-a proto kernel src ${veth-host-ip} metric 1002 table ovpns
-      # give the default route lower priority
-      ${ip} rule add from all lookup local pref 100
-      ${ip} rule del from all lookup local pref 0
-
-      # bridge HTTP traffic:
-      # any external port-80 request sent to the VPN addr will be forwarded to the rootns.
-      # this exists so LetsEncrypt can procure a cert for the MX over http.
-      # TODO: we could use _acme_challence.mx.uninsane.org CNAME to avoid this forwarding
-      # - <https://community.letsencrypt.org/t/where-does-letsencrypt-resolve-dns-from/37607/8>
-      ${in-ns} ${iptables} -A PREROUTING -t nat -p tcp --dport 80 -m iprange --dst-range ${vpn-ip} \
-        -j DNAT --to-destination ${veth-host-ip}:80
-
-      # we also bridge DNS traffic
-      ${in-ns} ${iptables} -A PREROUTING -t nat -p udp --dport 53 -m iprange --dst-range ${vpn-ip} \
-        -j DNAT --to-destination ${veth-host-ip}:53
-      ${in-ns} ${iptables} -A PREROUTING -t nat -p tcp --dport 53 -m iprange --dst-range ${vpn-ip} \
-        -j DNAT --to-destination ${veth-host-ip}:53
-
-      # in order to access DNS in this netns, we need to route it to the VPN's nameservers
-      # - alternatively, we could fix DNS servers like 1.1.1.1.
-      ${in-ns} ${iptables} -A OUTPUT -t nat -p udp --dport 53 -m iprange --dst-range 127.0.0.53 \
-        -j DNAT --to-destination ${vpn-dns}:53
-    '';
-  };
-
-  # create a new routing table that we can use to proxy traffic out of the root namespace
-  # through the ovpns namespace, and to the WAN via VPN.
-  networking.iproute2.rttablesExtraConfig = ''
-  5 ovpns
-  '';
-  networking.iproute2.enable = true;
-
-  sops.secrets."wg_ovpns_privkey" = {
-    sopsFile = ../../secrets/servo.yaml;
-  };
-
-  # HURRICANE ELECTRIC CONFIG:
-  # networking.sits = {
-  #   hurricane = {
-  #     remote = "216.218.226.238";
-  #     local = "192.168.0.5";
-  #     # local = "10.0.0.5";
-  #     # remote = "10.0.0.1";
-  #     # local = "10.0.0.22";
-  #     dev = "eth0";
-  #     ttl = 255;
-  #   };
-  # };
-  # networking.interfaces."hurricane".ipv6 = {
-  #   addresses = [
-  #     # mx.uninsane.org (publically routed /64)
-  #     {
-  #       address = "2001:470:b:465::1";
-  #       prefixLength = 128;
-  #     }
-  #     # client addr
-  #     # {
-  #     #   address = "2001:470:a:466::2";
-  #     #   prefixLength = 64;
-  #     # }
-  #   ];
-  #   routes = [
-  #     {
-  #       address = "::";
-  #       prefixLength = 0;
-  #       # via = "2001:470:a:466::1";
-  #     }
-  #   ];
-  # };
-
-  # # after configuration, we want the hurricane device to look like this:
-  # # hurricane: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
-  # #            inet6 2001:470:a:450::2  prefixlen 64  scopeid 0x0<global>
-  # #            inet6 fe80::c0a8:16  prefixlen 64  scopeid 0x20<link>
-  # #            sit  txqueuelen 1000  (IPv6-in-IPv4)
-  # # test with:
-  # #   curl --interface hurricane http://[2607:f8b0:400a:80b::2004]
-  # #   ping 2607:f8b0:400a:80b::2004
-}

hosts/servo/services/ddns-afraid.nix

@@ -1,31 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-# using manual ddns now
-lib.mkIf false
-{
-  systemd.services.ddns-afraid = {
-    description = "update dynamic DNS entries for freedns.afraid.org";
-    serviceConfig = {
-      EnvironmentFile = config.sops.secrets.ddns_afraid.path;
-      # TODO: ProtectSystem = "strict";
-      # TODO: ProtectHome = "full";
-      # TODO: PrivateTmp = true;
-    };
-    script = let
-      curl = "${pkgs.curl}/bin/curl -4";
-    in ''
-      ${curl} "https://freedns.afraid.org/dynamic/update.php?$AFRAID_KEY"
-    '';
-  };
-  systemd.timers.ddns-afraid = {
-    wantedBy = [ "multi-user.target" ];
-    timerConfig = {
-      OnStartupSec = "2min";
-      OnUnitActiveSec = "10min";
-    };
-  };
-
-  sops.secrets."ddns_afraid" = {
-    sopsFile = ../../../secrets/servo.yaml;
-  };
-}

hosts/servo/services/ddns-he.nix

@@ -1,34 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-# we use manual DDNS now
-lib.mkIf false
-{
-  systemd.services.ddns-he = {
-    description = "update dynamic DNS entries for HurricaneElectric";
-    serviceConfig = {
-      EnvironmentFile = config.sops.secrets.ddns_he.path;
-      # TODO: ProtectSystem = "strict";
-      # TODO: ProtectHome = "full";
-      # TODO: PrivateTmp = true;
-    };
-    # HE DDNS API is documented: https://dns.he.net/docs.html
-    script = let
-      crl = "${pkgs.curl}/bin/curl -4";
-    in ''
-      ${crl} "https://he.uninsane.org:$HE_PASSPHRASE@dyn.dns.he.net/nic/update?hostname=he.uninsane.org"
-      ${crl} "https://native.uninsane.org:$HE_PASSPHRASE@dyn.dns.he.net/nic/update?hostname=native.uninsane.org"
-      ${crl} "https://uninsane.org:$HE_PASSPHRASE@dyn.dns.he.net/nic/update?hostname=uninsane.org"
-    '';
-  };
-  systemd.timers.ddns-he = {
-    wantedBy = [ "multi-user.target" ];
-    timerConfig = {
-      OnStartupSec = "2min";
-      OnUnitActiveSec = "10min";
-    };
-  };
-
-  sops.secrets."ddns_he" = {
-    sopsFile = ../../../secrets/servo.yaml;
-  };
-}

hosts/servo/services/default.nix

@@ -1,26 +0,0 @@
-{ ... }:
-{
-  imports = [
-    ./ddns-afraid.nix
-    ./ddns-he.nix
-    ./ejabberd.nix
-    ./freshrss.nix
-    ./gitea.nix
-    ./goaccess.nix
-    ./ipfs.nix
-    ./jackett.nix
-    ./jellyfin.nix
-    ./kiwix-serve.nix
-    ./matrix
-    ./navidrome.nix
-    ./nixserve.nix
-    ./nginx.nix
-    ./pleroma.nix
-    ./postfix.nix
-    ./postgres.nix
-    ./prosody.nix
-    ./transmission.nix
-    ./trust-dns.nix
-    ./wikipedia.nix
-  ];
-}

hosts/servo/services/ejabberd.nix

@@ -1,393 +0,0 @@
-# docs:
-# - <https://docs.ejabberd.im/admin/configuration/basic>
-# example configs:
-# - <https://github.com/vkleen/machines/blob/138a2586ce185d7cf201d4e1fe898c83c4af52eb/hosts/europium/ejabberd.nix>
-# - <https://github.com/Mic92/stockholm/blob/675ef0088624c9de1cb531f318446316884a9d3d/tv/3modules/ejabberd/default.nix>
-# - <https://github.com/buffet/tararice/blob/master/programs/ejabberd.nix>
-#   - enables STUN and TURN
-#   - only over UDP 3478, not firewall-forwarding any TURN port range
-#   - uses stun_disco module (but with no options)
-# - <https://github.com/leo60228/dotfiles/blob/39b3abba3009bdc31413d4757ca2f882a33eec8b/files/ejabberd.yml>
-# - <https://github.com/Mic92/dotfiles/blob/ddf0f4821f554f7667fc803344657367c55fb9e6/nixos/eve/modules/ejabberd.nix>
-# - <nixpkgs:nixos/tests/xmpp/ejabberd.nix>
-# - 2013: <https://github.com/processone/ejabberd/blob/master/ejabberd.yml.example>
-#
-# compliance tests:
-# - <https://compliance.conversations.im/server/uninsane.org/#xep0352>
-{ config, lib, pkgs, ... }:
-
-# XXX: avatar support works in MUCs but not DMs
-# lib.mkIf false
-{
-  sane.persist.sys.plaintext = [
-    { user = "ejabberd"; group = "ejabberd"; directory = "/var/lib/ejabberd"; }
-  ];
-  networking.firewall.allowedTCPPorts = [
-    3478  # STUN/TURN
-    5222  # XMPP  client -> server
-    5223  # XMPPS client -> server (XMPP over TLS)
-    5269  # XMPP  server -> server
-    5270  # XMPPS server -> server (XMPP over TLS)
-    5280  # bosh
-    5281  # bosh (https) ??
-    5349  # STUN/TURN (TLS)
-    5443  # web services (file uploads, websockets, admin)
-  ];
-  networking.firewall.allowedUDPPorts = [
-    3478  # STUN/TURN
-  ];
-  networking.firewall.allowedTCPPortRanges = [{
-    from = 49152;  # TURN
-    to = 65535;
-  }];
-  networking.firewall.allowedUDPPortRanges = [{
-    from = 49152;  # TURN
-    to = 65535;
-  }];
-
-  # provide access to certs
-  users.users.ejabberd.extraGroups = [ "nginx" ];
-
-  security.acme.certs."uninsane.org".extraDomainNames = [
-    "xmpp.uninsane.org"
-    "muc.xmpp.uninsane.org"
-    "pubsub.xmpp.uninsane.org"
-    "upload.xmpp.uninsane.org"
-    "vjid.xmpp.uninsane.org"
-  ];
-
-  # exists so the XMPP server's cert can obtain altNames for all its resources
-  services.nginx.virtualHosts."xmpp.uninsane.org" = {
-    useACMEHost = "uninsane.org";
-  };
-  services.nginx.virtualHosts."muc.xmpp.uninsane.org" = {
-    useACMEHost = "uninsane.org";
-  };
-  services.nginx.virtualHosts."pubsub.xmpp.uninsane.org" = {
-    useACMEHost = "uninsane.org";
-  };
-  services.nginx.virtualHosts."upload.xmpp.uninsane.org" = {
-    useACMEHost = "uninsane.org";
-  };
-  services.nginx.virtualHosts."vjid.xmpp.uninsane.org" = {
-    useACMEHost = "uninsane.org";
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet = {
-    # XXX: SRV records have to point to something with a A/AAAA record; no CNAMEs
-    A."xmpp" =                "%NATIVE%";
-    CNAME."muc.xmpp" =        "xmpp";
-    CNAME."pubsub.xmpp" =     "xmpp";
-    CNAME."upload.xmpp" =     "xmpp";
-    CNAME."vjid.xmpp" =       "xmpp";
-
-    # _Service._Proto.Name    TTL Class SRV    Priority Weight Port Target
-    # - <https://xmpp.org/extensions/xep-0368.html>
-    # something's requesting the SRV records for muc.xmpp, so let's include it
-    # nothing seems to request XMPP SRVs for the other records (except @)
-    # lower numerical priority field tells clients to prefer this method
-    SRV."_xmpps-client._tcp.muc.xmpp" =       "3 50 5223 xmpp";
-    SRV."_xmpps-server._tcp.muc.xmpp" =       "3 50 5270 xmpp";
-    SRV."_xmpp-client._tcp.muc.xmpp" =        "5 50 5222 xmpp";
-    SRV."_xmpp-server._tcp.muc.xmpp" =        "5 50 5269 xmpp";
-
-    SRV."_xmpps-client._tcp" =                "3 50 5223 xmpp";
-    SRV."_xmpps-server._tcp" =                "3 50 5270 xmpp";
-    SRV."_xmpp-client._tcp" =                 "5 50 5222 xmpp";
-    SRV."_xmpp-server._tcp" =                 "5 50 5269 xmpp";
-
-    SRV."_stun._udp" =                        "5 50 3478 xmpp";
-    SRV."_stun._tcp" =                        "5 50 3478 xmpp";
-    SRV."_stuns._tcp" =                       "5 50 5349 xmpp";
-    SRV."_turn._udp" =                        "5 50 3478 xmpp";
-    SRV."_turn._tcp" =                        "5 50 3478 xmpp";
-    SRV."_turns._tcp" =                       "5 50 5349 xmpp";
-  };
-
-  # TODO: allocate UIDs/GIDs ?
-  services.ejabberd.enable = true;
-  services.ejabberd.configFile = "/var/lib/ejabberd/ejabberd.yaml";
-  systemd.services.ejabberd.preStart = let
-    config-in = pkgs.writeTextFile {
-      name = "ejabberd.yaml.in";
-      text = ''
-        hosts:
-          - uninsane.org
-
-        # none | emergency | alert | critical | error | warning | notice | info | debug
-        loglevel: debug
-        # loglevel: info
-        # loglevel: notice
-
-        acme:
-          auto: false
-        certfiles:
-        - /var/lib/acme/uninsane.org/full.pem
-        # ca_file: ${pkgs.cacert.unbundled}/etc/ssl/certs/
-        # ca_file: ${pkgs.cacert}/etc/ssl/certs/ca-bundle.crt
-
-        pam_userinfotype: jid
-
-        acl:
-          admin:
-            user:
-              - "colin@uninsane.org"
-          local:
-            user_regexp: ""
-          loopback:
-            ip:
-              - 127.0.0.0/8
-              - ::1/128
-
-        access_rules:
-          local:
-            allow: local
-          c2s_access:
-            allow: all
-          announce:
-            allow: admin
-          configure:
-            allow: admin
-          muc_create:
-            allow: local
-          pubsub_createnode_access:
-            allow: all
-          trusted_network:
-            allow: loopback
-
-        # docs: <https://docs.ejabberd.im/admin/configuration/basic/#shaper-rules>
-        shaper_rules:
-          # setting this to above 1 may break outgoing messages
-          # - maybe some servers rate limit? or just don't understand simultaneous connections?
-          max_s2s_connections: 1
-          max_user_sessions: 10
-          max_user_offline_messages: 5000
-          c2s_shaper:
-            fast: all
-          s2s_shaper:
-            med: all
-
-        # docs: <https://docs.ejabberd.im/admin/configuration/basic/#shapers>
-        # this limits the bytes/sec.
-        # for example, burst: 3_000_000 and rate: 100_000 means:
-        # - each client has a BW budget that accumulates 100kB/sec and is capped at 3 MB
-        shaper:
-          fast: 1000000
-          med:   500000
-        #   fast:
-        #     - rate:        1000000
-        #     - burst_size: 10000000
-        #   med:
-        #     - rate:         500000
-        #     - burst_size:  5000000
-
-        # see: <https://docs.ejabberd.im/admin/configuration/listen/>
-        # s2s_use_starttls: true
-        s2s_use_starttls: optional
-        # lessens 504: remote-server-timeout errors
-        # see: <https://github.com/processone/ejabberd/issues/3105#issuecomment-562182967>
-        negotiation_timeout: 60
-
-        listen:
-          -
-            port: 5222
-            module: ejabberd_c2s
-            shaper: c2s_shaper
-            starttls: true
-            access: c2s_access
-          -
-            port: 5223
-            module: ejabberd_c2s
-            shaper: c2s_shaper
-            tls: true
-            access: c2s_access
-          -
-            port: 5269
-            module: ejabberd_s2s_in
-            shaper: s2s_shaper
-          -
-            port: 5270
-            module: ejabberd_s2s_in
-            shaper: s2s_shaper
-            tls: true
-          -
-            port: 5443
-            module: ejabberd_http
-            tls: true
-            request_handlers:
-              /admin: ejabberd_web_admin  # TODO: ensure this actually works
-              /api: mod_http_api  # ejabberd API endpoint (to control server)
-              /bosh: mod_bosh
-              /upload: mod_http_upload
-              /ws: ejabberd_http_ws
-              # /.well-known/host-meta: mod_host_meta
-              # /.well-known/host-meta.json: mod_host_meta
-          -
-            # STUN+TURN TCP
-            # note that the full port range should be forwarded ("not NAT'd")
-            # `use_turn=true` enables both TURN *and* STUN
-            port: 3478
-            module: ejabberd_stun
-            transport: tcp
-            use_turn: true
-            turn_min_port: 49152
-            turn_max_port: 65535
-            turn_ipv4_address: %NATIVE%
-          -
-            # STUN+TURN UDP
-            port: 3478
-            module: ejabberd_stun
-            transport: udp
-            use_turn: true
-            turn_min_port: 49152
-            turn_max_port: 65535
-            turn_ipv4_address: %NATIVE%
-          -
-            # STUN+TURN TLS over TCP
-            port: 5349
-            module: ejabberd_stun
-            transport: tcp
-            tls: true
-            certfile: /var/lib/acme/uninsane.org/full.pem
-            use_turn: true
-            turn_min_port: 49152
-            turn_max_port: 65535
-            turn_ipv4_address: %NATIVE%
-
-        # TODO: enable mod_fail2ban
-        # TODO(low): look into mod_http_fileserver for serving macros?
-        modules:
-          # mod_adhoc: {}
-          # mod_announce:
-          #   access: admin
-          # allows users to set avatars in vCard
-          # - <https://docs.ejabberd.im/admin/configuration/modules/#mod-avatar>
-          mod_avatar: {}
-          mod_caps: {}  # for mod_pubsub
-          mod_carboncopy: {}  # allows multiple clients to receive a user's message
-          # queues messages when recipient is offline, including PEP and presence messages.
-          # compliance test suggests this be enabled
-          mod_client_state: {}
-          # mod_conversejs: TODO: enable once on 21.12
-          # allows clients like Dino to discover where to upload files
-          mod_disco:
-            server_info:
-              -
-                modules: all
-                name: abuse-addresses
-                urls:
-                  - "mailto:admin.xmpp@uninsane.org"
-                  - "xmpp:colin@uninsane.org"
-              -
-                modules: all
-                name: admin-addresses
-                urls:
-                  - "mailto:admin.xmpp@uninsane.org"
-                  - "xmpp:colin@uninsane.org"
-          mod_http_upload:
-            host: upload.xmpp.uninsane.org
-            hosts:
-              - upload.xmpp.uninsane.org
-            put_url: "https://@HOST@:5443/upload"
-            dir_mode: "0750"
-            file_mode: "0750"
-            rm_on_unregister: false
-          # allow discoverability of BOSH and websocket endpoints
-          # TODO: enable once on ejabberd 22.05  (presently 21.04)
-          # mod_host_meta: {}
-          mod_jidprep: {}  # probably not needed: lets clients normalize jids
-          mod_last: {}  # allow other users to know when i was last online
-          mod_mam:
-            # Mnesia is limited to 2GB, better to use an SQL backend
-            # For small servers SQLite is a good fit and is very easy
-            # to configure. Uncomment this when you have SQL configured:
-            # db_type: sql
-            assume_mam_usage: true
-            default: always
-          mod_muc:
-            access:
-              - allow
-            access_admin:
-              - allow: admin
-            access_create: muc_create
-            access_persistent: muc_create
-            access_mam:
-              - allow
-            history_size: 100  # messages to show new participants
-            host: muc.xmpp.uninsane.org
-            hosts:
-              - muc.xmpp.uninsane.org
-            default_room_options:
-              anonymous: false
-              lang: en
-              persistent: true
-              mam: true
-          mod_muc_admin: {}
-          mod_offline:  # store messages for a user when they're offline (TODO: understand multi-client workflow?)
-            access_max_user_messages: max_user_offline_messages
-            store_groupchat: true
-          mod_ping: {}
-          mod_privacy: {}  # deprecated, but required for `ejabberctl export_piefxis`
-          mod_private: {}  # allow local clients to persist arbitrary data on my server
-          # push notifications to services integrated with e.g. Apple/Android.
-          # default is for a maximum amount of PII to be withheld, since these push notifs
-          # generally traverse 3rd party services. can opt to include message body, etc, though.
-          mod_push: {}
-          # i don't fully understand what this does, but it seems aimed at making push notifs more reliable.
-          mod_push_keepalive: {}
-          mod_roster:
-            versioning: true
-          # docs: <https://docs.ejabberd.im/admin/configuration/modules/#mod-s2s-dialback>
-          # s2s dialback to verify inbound messages
-          # unclear to what degree the XMPP network requires this
-          mod_s2s_dialback: {}
-          mod_shared_roster: {}  # creates groups for @all, @online, and anything manually administered?
-          mod_stream_mgmt:
-            resend_on_timeout: if_offline  # resend undelivered messages if the origin client is offline
-          # fallback for when DNS-based STUN discovery is unsupported.
-          # - see: <https://xmpp.org/extensions/xep-0215.html>
-          # docs: <https://docs.ejabberd.im/admin/configuration/modules/#mod-stun-disco>
-          # people say to just keep this defaulted (i guess ejabberd knows to return its `host` option of uninsane.org?)
-          mod_stun_disco: {}
-          # docs: <https://docs.ejabberd.im/admin/configuration/modules/#mod-vcard>
-          mod_vcard:
-            allow_return_all: true  # all users are discoverable (?)
-            host: vjid.xmpp.uninsane.org
-            hosts:
-              - vjid.xmpp.uninsane.org
-            search: true
-          mod_vcard_xupdate: {}  # needed for avatars
-          # docs: <https://docs.ejabberd.im/admin/configuration/modules/#mod-pubsub>
-          mod_pubsub:  # needed for avatars
-            access_createnode: pubsub_createnode_access
-            host: pubsub.xmpp.uninsane.org
-            hosts:
-              - pubsub.xmpp.uninsane.org
-            ignore_pep_from_offline: false
-            last_item_cache: true
-            plugins:
-              - pep
-              - flat
-            force_node_config:
-              # ensure client bookmarks are private
-              storage:bookmarks:
-                access_model: whitelist
-              urn:xmpp:avatar:data:
-                access_model: open
-              urn:xmpp:avatar:metadata:
-                access_model: open
-          mod_version: {}
-      '';
-    };
-    sed = "${pkgs.gnused}/bin/sed";
-  in ''
-    ip=$(cat '${config.sane.services.dyn-dns.ipPath}')
-    # config is 444 (not 644), so we want to write out-of-place and then atomically move
-    # TODO: factor this out into `sane-woop` helper?
-    rm -f /var/lib/ejabberd/ejabberd.yaml.new
-    ${sed} "s/%NATIVE%/$ip/" ${config-in} > /var/lib/ejabberd/ejabberd.yaml.new
-    mv /var/lib/ejabberd/ejabberd.yaml{.new,}
-  '';
-
-  sane.services.dyn-dns.restartOnChange = [ "ejabberd.service" ];
-}

hosts/servo/services/freshrss.nix

@@ -1,61 +0,0 @@
-# import feeds with e.g.
-# ```console
-# $ nix build '.#nixpkgs.freshrss'
-# $ sudo -u freshrss -g freshrss FRESHRSS_DATA_PATH=/var/lib/freshrss ./result/cli/import-for-user.php --user admin --filename /home/colin/.config/newsflashFeeds.opml
-# ```
-#
-# export feeds with
-# ```console
-# $ sudo -u freshrss -g freshrss FRESHRSS_DATA_PATH=/var/lib/freshrss ./result/cli/export-opml-for-user.php --user admin
-# ```
-
-{ config, lib, pkgs, sane-lib, ... }:
-{
-  sops.secrets.freshrss_passwd = {
-    sopsFile = ../../../secrets/servo.yaml;
-    owner = config.users.users.freshrss.name;
-    mode = "0400";
-  };
-  sane.persist.sys.plaintext = [
-    { user = "freshrss"; group = "freshrss"; directory = "/var/lib/freshrss"; }
-  ];
-
-  services.freshrss.enable = true;
-  services.freshrss.baseUrl = "https://rss.uninsane.org";
-  services.freshrss.virtualHost = "rss.uninsane.org";
-  services.freshrss.passwordFile = config.sops.secrets.freshrss_passwd.path;
-
-  systemd.services.freshrss-import-feeds =
-  let
-    feeds = sane-lib.feeds;
-    fresh = config.systemd.services.freshrss-config;
-    all-feeds = config.sane.feeds;
-    wanted-feeds = feeds.filterByFormat ["text" "image"] all-feeds;
-    opml = pkgs.writeText "sane-freshrss.opml" (feeds.feedsToOpml wanted-feeds);
-  in {
-    inherit (fresh) wantedBy environment;
-    serviceConfig = {
-      inherit (fresh.serviceConfig) Type User Group StateDirectory WorkingDirectory
-        # hardening options
-        CapabilityBoundingSet DeviceAllow LockPersonality NoNewPrivileges PrivateDevices PrivateTmp PrivateUsers ProcSubset ProtectClock ProtectControlGroups ProtectHome ProtectHostname ProtectKernelLogs ProtectKernelModules ProtectKernelTunables ProtectProc ProtectSystem RemoveIPC RestrictNamespaces RestrictRealtime RestrictSUIDSGID SystemCallArchitectures SystemCallFilter UMask;
-    };
-    description = "import sane RSS feed list";
-    after = [ "freshrss-config.service" ];
-    script = ''
-      ${pkgs.freshrss}/cli/import-for-user.php --user admin --filename ${opml}
-    '';
-  };
-
-  # the default ("*:0/5") is to run every 5 minutes.
-  # `systemctl list-timers` to show
-  systemd.services.freshrss-updater.startAt = lib.mkForce "*:3/30";
-
-  services.nginx.virtualHosts."rss.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    # the routing is handled by services.freshrss.virtualHost
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."rss" = "native";
-}

hosts/servo/services/goaccess.nix

@@ -1,68 +0,0 @@
-{ pkgs, ... }:
-{
-  # based on <https://bytes.fyi/real-time-goaccess-reports-with-nginx/>
-  # log-format setting can be derived with this tool if custom:
-  # - <https://github.com/stockrt/nginx2goaccess>
-  # config options:
-  # - <https://github.com/allinurl/goaccess/blob/master/config/goaccess.conf>
-
-  systemd.services.goaccess = {
-    description = "GoAccess server monitoring";
-    serviceConfig = {
-      ExecStart = ''
-        ${pkgs.goaccess}/bin/goaccess \
-          -f /var/log/nginx/public.log \
-          --log-format=VCOMBINED \
-          --real-time-html \
-          --html-refresh=30 \
-          --no-query-string \
-          --anonymize-ip \
-          --ignore-panel=HOSTS \
-          --ws-url=wss://sink.uninsane.org:443/ws \
-          --port=7890 \
-          -o /var/lib/uninsane/sink/index.html
-      '';
-      ExecReload = "${pkgs.coreutils}/bin/kill -HUP $MAINPID";
-      Type = "simple";
-      Restart = "on-failure";
-      RestartSec = "10s";
-
-      # hardening
-      WorkingDirectory = "/tmp";
-      NoNewPrivileges = true;
-      PrivateTmp = true;
-      ProtectHome = "read-only";
-      ProtectSystem = "strict";
-      SystemCallFilter = "~@clock @cpu-emulation @debug @keyring @memlock @module @mount @obsolete @privileged @reboot @resources @setuid @swap @raw-io";
-      ReadOnlyPaths = "/";
-      ReadWritePaths = [ "/proc/self" "/var/lib/uninsane/sink" ];
-      PrivateDevices = "yes";
-      ProtectKernelModules = "yes";
-      ProtectKernelTunables = "yes";
-    };
-    after = [ "network.target" ];
-    wantedBy = [ "multi-user.target" ];
-  };
-
-  # server statistics
-  services.nginx.virtualHosts."sink.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    root = "/var/lib/uninsane/sink";
-
-    locations."/ws" = {
-      proxyPass = "http://127.0.0.1:7890";
-      # XXX not sure how much of this is necessary
-      extraConfig = ''
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection $connection_upgrade;
-        proxy_buffering off;
-        proxy_read_timeout 7d;
-      '';
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."sink" = "native";
-}

hosts/servo/services/ipfs.nix

@@ -1,93 +0,0 @@
-# admin:
-# - view stats:
-#   - sudo -u ipfs -g ipfs ipfs -c /var/lib/ipfs/ stats bw
-#   - sudo -u ipfs -g ipfs ipfs -c /var/lib/ipfs/ stats dht
-#   - sudo -u ipfs -g ipfs ipfs -c /var/lib/ipfs/ bitswap stat
-# - number of open peer connections:
-#   - sudo -u ipfs -g ipfs ipfs -c /var/lib/ipfs/ swarm peers | wc -l
-
-{ lib, ... }:
-
-lib.mkIf false # i don't actively use ipfs anymore
-{
-  sane.persist.sys.plaintext = [
-    # TODO: mode? could be more granular
-    { user = "261"; group = "261"; directory = "/var/lib/ipfs"; }
-  ];
-
-  networking.firewall.allowedTCPPorts = [ 4001 ];
-  networking.firewall.allowedUDPPorts = [ 4001 ];
-
-  services.nginx.virtualHosts."ipfs.uninsane.org" = {
-    # don't default to ssl upgrades, since this may be dnslink'd from a different domain.
-    # ideally we'd disable ssl entirely, but some places assume it?
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-
-    locations."/" = {
-      proxyPass = "http://127.0.0.1:8080";
-      extraConfig = ''
-        proxy_set_header Host $host;
-        proxy_set_header X-Ipfs-Gateway-Prefix "";
-      '';
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."ipfs" = "native";
-
-  # services.ipfs.enable = true;
-  services.kubo.localDiscovery = true;
-  services.kubo.settings = {
-    Addresses = {
-      Announce = [
-        # "/dns4/ipfs.uninsane.org/tcp/4001"
-        "/dns4/ipfs.uninsane.org/udp/4001/quic"
-      ];
-      Swarm = [
-        # "/dns4/ipfs.uninsane.org/tcp/4001"
-        # "/ip4/0.0.0.0/tcp/4001"
-        "/dns4/ipfs.uninsane.org/udp/4001/quic"
-        "/ip4/0.0.0.0/udp/4001/quic"
-      ];
-    };
-    Gateway = {
-      # the gateway can only be used to serve content already replicated on this host
-      NoFetch = true;
-    };
-    Swarm = {
-      ConnMgr = {
-        # maintain between LowWater and HighWater peer connections
-        # taken from: https://github.com/ipfs/ipfs-desktop/pull/2055
-        # defaults are 600-900: https://github.com/ipfs/kubo/blob/master/docs/config.md#swarmconnmgr
-        LowWater = 20;
-        HighWater = 40;
-        # default is 20s. i guess more grace period = less churn
-        GracePeriod = "1m";
-      };
-      ResourceMgr = {
-        # docs: https://github.com/libp2p/go-libp2p-resource-manager#resource-scopes
-        Enabled = true;
-        Limits = {
-          System = {
-            Conns = 196;
-            ConnsInbound = 128;
-            ConnsOutbound = 128;
-            FD = 512;
-            Memory = 1073741824;  # 1GiB
-            Streams = 1536;
-            StreamsInbound = 1024;
-            StreamsOutbound = 1024;
-          };
-        };
-      };
-      Transports = {
-        Network = {
-          # disable TCP, force QUIC, for lighter resources
-          TCP = false;
-          QUIC = true;
-        };
-      };
-    };
-  };
-}

hosts/servo/services/jackett.nix

@@ -1,32 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.sys.plaintext = [
-    # TODO: mode? we only need this to save Indexer creds ==> migrate to config?
-    { user = "root"; group = "root"; directory = "/var/lib/jackett"; }
-  ];
-  services.jackett.enable = true;
-
-  systemd.services.jackett.after = [ "wireguard-wg0.service" ];
-  systemd.services.jackett.partOf = [ "wireguard-wg0.service" ];
-  systemd.services.jackett.serviceConfig = {
-    # run this behind the OVPN static VPN
-    NetworkNamespacePath = "/run/netns/ovpns";
-    # patch jackett to listen on the public interfaces
-    # ExecStart = lib.mkForce "${pkgs.jackett}/bin/Jackett --NoUpdates --DataFolder /var/lib/jackett/.config/Jackett --ListenPublic";
-  };
-
-  # jackett torrent search
-  services.nginx.virtualHosts."jackett.uninsane.org" = {
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    locations."/" = {
-      # proxyPass = "http://ovpns.uninsane.org:9117";
-      proxyPass = "http://10.0.1.6:9117";
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."jackett" = "native";
-}
-

hosts/servo/services/jellyfin.nix

@@ -1,67 +0,0 @@
-{ config, lib, ... }:
-
-# TODO: re-enable after migrating media dir to /var/lib/uninsane/media
-# else it's too spammy
-lib.mkIf false
-{
-  networking.firewall.allowedUDPPorts = [
-    1900 7359 # DLNA: https://jellyfin.org/docs/general/networking/index.html
-  ];
-  sane.persist.sys.plaintext = [
-    # TODO: mode? could be more granular
-    { user = "jellyfin"; group = "jellyfin"; directory = "/var/lib/jellyfin"; }
-  ];
-
-  # Jellyfin multimedia server
-  # this is mostly taken from the official jellfin.org docs
-  services.nginx.virtualHosts."jelly.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-
-    locations."/" = {
-      proxyPass = "http://127.0.0.1:8096";
-      extraConfig = ''
-        proxy_set_header Host $host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_set_header X-Forwarded-Proto $scheme;
-        proxy_set_header X-Forwarded-Protocol $scheme;
-        proxy_set_header X-Forwarded-Host $http_host;
-
-        # Disable buffering when the nginx proxy gets very resource heavy upon streaming
-        proxy_buffering off;
-      '';
-    };
-    # locations."/web/" = {
-    #   proxyPass = "http://127.0.0.1:8096/web/index.html";
-    #   extraConfig = ''
-    #     proxy_set_header Host $host;
-    #     proxy_set_header X-Real-IP $remote_addr;
-    #     proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-    #     proxy_set_header X-Forwarded-Proto $scheme;
-    #     proxy_set_header X-Forwarded-Protocol $scheme;
-    #     proxy_set_header X-Forwarded-Host $http_host;
-    #   '';
-    # };
-    locations."/socket" = {
-      proxyPass = "http://127.0.0.1:8096";
-      extraConfig = ''
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection "upgrade";
-
-        proxy_set_header Host $host;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_set_header X-Forwarded-Proto $scheme;
-        proxy_set_header X-Forwarded-Protocol $scheme;
-        proxy_set_header X-Forwarded-Host $http_host;
-      '';
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."jelly" = "native";
-
-  services.jellyfin.enable = true;
-}

hosts/servo/services/kiwix-serve.nix

@@ -1,17 +0,0 @@
-{ ... }:
-{
-  sane.services.kiwix-serve = {
-    enable = true;
-    port = 8013;
-    zimPaths = [ "/var/lib/uninsane/www-archive/wikipedia_en_all_maxi_2022-05.zim" ];
-  };
-
-  services.nginx.virtualHosts."w.uninsane.org" = {
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    locations."/".proxyPass = "http://127.0.0.1:8013";
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."w" = "native";
-}

hosts/servo/services/matrix/default.nix

@@ -1,134 +0,0 @@
-# docs: https://nixos.wiki/wiki/Matrix
-# docs: https://nixos.org/manual/nixos/stable/index.html#module-services-matrix-synapse
-{ config, lib, pkgs, ... }:
-
-{
-  imports = [
-    ./discord-puppet.nix
-    # ./irc.nix
-  ];
-
-  sane.persist.sys.plaintext = [
-    { user = "matrix-synapse"; group = "matrix-synapse"; directory = "/var/lib/matrix-synapse"; }
-  ];
-  services.matrix-synapse.enable = true;
-  services.matrix-synapse.settings.log_config = ./synapse-log_level.yaml;
-  services.matrix-synapse.settings.server_name = "uninsane.org";
-
-  # services.matrix-synapse.enable_registration_captcha = true;
-  # services.matrix-synapse.enable_registration_without_verification = true;
-  services.matrix-synapse.settings.enable_registration = true;
-  # services.matrix-synapse.registration_shared_secret = "<shared key goes here>";
-
-  # default for listeners is port = 8448, tls = true, x_forwarded = false.
-  # we change this because the server is situated behind nginx.
-  services.matrix-synapse.settings.listeners = [
-    {
-      port = 8008;
-      bind_addresses = [ "127.0.0.1" ];
-      type = "http";
-      tls = false;
-      x_forwarded = true;
-      resources = [
-        {
-          names = [ "client" "federation" ];
-          compress = false;
-        }
-      ];
-    }
-  ];
-
-  services.matrix-synapse.settings.admin_contact = "admin.matrix@uninsane.org";
-  services.matrix-synapse.settings.registrations_require_3pid = [ "email" ];
-
-  services.matrix-synapse.extraConfigFiles = [
-    config.sops.secrets.matrix_synapse_secrets.path
-  ];
-
-  # services.matrix-synapse.extraConfigFiles = [builtins.toFile "matrix-synapse-extra-config" ''
-  #   admin_contact: "admin.matrix@uninsane.org"
-  #   registrations_require_3pid:
-  #     - email
-  #   email:
-  #     smtp_host: "mx.uninsane.org"
-  #     smtp_port: 587
-  #     smtp_user: "matrix-synapse"
-  #     smtp_pass: "${secrets.matrix-synapse.smtp_pass}"
-  #     require_transport_security: true
-  #     enable_tls: true
-  #     notif_from: "%(app)s <notify.matrix@uninsane.org>"
-  #     app_name: "Uninsane Matrix"
-  #     enable_notifs: true
-  #     validation_token_lifetime: 96h
-  #     invite_client_location: "https://web.matrix.uninsane.org"
-  #     subjects:
-  #       email_validation: "[%(server_name)s] Validate your email"
-  # ''];
-
-  # new users may be registered on the CLI:
-  #   register_new_matrix_user -c /nix/store/8n6kcka37jhmi4qpd2r03aj71pkyh21s-homeserver.yaml http://localhost:8008
-  #
-  # or provide an registration token then can use to register through the client.
-  #   docs: https://github.com/matrix-org/synapse/blob/develop/docs/usage/administration/admin_api/registration_tokens.md
-  # first, grab your own user's access token (Help & About section in Element). then:
-  #   curl --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens
-  # create a token with unlimited uses:
-  #   curl -d '{}' --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens/new
-  # create a token with limited uses:
-  #   curl -d '{ "uses_allowed": 1 }' --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens/new
-
-  # matrix chat server
-  # TODO: was `publog`
-  services.nginx.virtualHosts."matrix.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-
-    # TODO colin: replace this with something helpful to the viewer
-    # locations."/".extraConfig = ''
-    #   return 404;
-    # '';
-
-    locations."/" = {
-      proxyPass = "http://127.0.0.1:8008";
-    };
-    # redirect browsers to the web client.
-    # i don't think native matrix clients ever fetch the root.
-    # ideally this would be put behind some user-agent test though.
-    locations."= /" = {
-      return = "301 https://web.matrix.uninsane.org";
-    };
-
-    # locations."/_matrix" = {
-    #   proxyPass = "http://127.0.0.1:8008";
-    # };
-  };
-
-  # matrix web client
-  # docs: https://nixos.org/manual/nixos/stable/index.html#module-services-matrix-element-web
-  services.nginx.virtualHosts."web.matrix.uninsane.org" = {
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-
-    root = pkgs.element-web.override {
-      conf = {
-        default_server_config."m.homeserver" = {
-          "base_url" = "https://matrix.uninsane.org";
-          "server_name" = "uninsane.org";
-        };
-      };
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet = {
-    CNAME."matrix" = "native";
-    CNAME."web.matrix" = "native";
-  };
-
-
-  sops.secrets.matrix_synapse_secrets = {
-    sopsFile = ../../../../secrets/servo.yaml;
-    owner = config.users.users.matrix-synapse.name;
-  };
-}

hosts/servo/services/matrix/discord-puppet.nix

@@ -1,52 +0,0 @@
-{ lib, ... }:
-{
-  sane.persist.sys.plaintext = [
-    { user = "matrix-synapse"; group = "matrix-synapse"; directory = "/var/lib/mx-puppet-discord"; }
-  ];
-
-  services.matrix-synapse.settings.app_service_config_files = [
-    # auto-created by mx-puppet-discord service
-    "/var/lib/mx-puppet-discord/discord-registration.yaml"
-  ];
-
-  services.mx-puppet-discord.enable = true;
-  # schema/example: <https://gitlab.com/mx-puppet/discord/mx-puppet-discord/-/blob/main/sample.config.yaml>
-  services.mx-puppet-discord.settings = {
-    bridge = {
-      # port = 8434
-      bindAddress = "127.0.0.1";
-      domain = "uninsane.org";
-      homeserverUrl = "http://127.0.0.1:8008";
-      # displayName = "mx-discord-puppet";  # matrix name for the bot
-      # matrix "groups" were an earlier version of spaces.
-      # maybe the puppet understands this, maybe not?
-      enableGroupSync = false;
-    };
-    presence = {
-      enabled = false;
-      interval = 30000;
-    };
-    provisioning = {
-      # allow these users to control the puppet
-      whitelist = [ "@colin:uninsane\\.org" ];
-    };
-    relay = {
-      whitelist = [ "@colin:uninsane\\.org" ];
-    };
-    selfService = {
-      # who's allowed to use plumbed rooms (idk what that means)
-      whitelist = [ "@colin:uninsane\\.org" ];
-    };
-    logging = {
-      # silly, debug, verbose, info, warn, error
-      console = "debug";
-    };
-  };
-
-  systemd.services.mx-puppet-discord.serviceConfig = {
-    # fix up to not use /var/lib/private, but just /var/lib
-    DynamicUser = lib.mkForce false;
-    User = "matrix-synapse";
-    Group = "matrix-synapse";
-  };
-}

hosts/servo/services/matrix/irc.nix

@@ -1,97 +0,0 @@
-{ config, lib, ... }:
-
-{
-  sane.persist.sys.plaintext = [
-    # TODO: mode?
-    # user and group are both "matrix-appservice-irc"
-    { user = "993"; group = "992"; directory = "/var/lib/matrix-appservice-irc"; }
-  ];
-
-  services.matrix-synapse.settings.app_service_config_files = [
-    "/var/lib/matrix-appservice-irc/registration.yml"  # auto-created by irc appservice
-  ];
-
-  # note: Rizon allows only FOUR simultaneous IRC connections per IP: https://wiki.rizon.net/index.php?title=Connection/Session_Limit_Exemptions
-  # Rizon supports CertFP for auth: https://wiki.rizon.net/index.php?title=CertFP
-  services.matrix-appservice-irc.enable = true;
-  services.matrix-appservice-irc.registrationUrl = "http://127.0.0.1:8009";
-  # settings documented here: https://github.com/matrix-org/matrix-appservice-irc/blob/develop/config.sample.yaml
-  services.matrix-appservice-irc.settings = {
-    homeserver = {
-      url = "http://127.0.0.1:8008";
-      dropMatrixMessagesAfterSecs = 300;
-      domain = "uninsane.org";
-      enablePresence = true;
-      bindPort = 9999;
-      bindHost = "127.0.0.1";
-    };
-
-    ircService = {
-      servers = {
-        "irc.rizon.net" = {
-          name = "Rizon";
-          port = 6697;  # SSL port
-          ssl = true;
-          sasl = true;  # appservice doesn't support NickServ identification
-          botConfig = {
-            # bot has no presence in IRC channel; only real Matrix users
-            enabled = false;
-            # nick = "UninsaneDotOrg";
-            nick = "uninsane";
-            username = "uninsane";
-          };
-          dynamicChannels = {
-            enabled = true;
-            aliasTemplate = "#irc_rizon_$CHANNEL";
-          };
-          ircClients = {
-            nickTemplate = "$LOCALPARTsane";
-            # by default, Matrix will convert messages greater than (3) lines into a pastebin-like URL to send to IRC.
-            lineLimit = 20;
-          };
-          matrixClients = {
-            userTemplate = "@irc_rizon_$NICK";  # the :uninsane.org part is appended automatically
-          };
-
-          # this will let this user message the appservice with `!join #<IRCChannel>` and the rest "Just Works"
-          "@colin:uninsane.org" = "admin";
-
-          membershipLists = {
-            enabled = true;
-            global = {
-              ircToMatrix = {
-                initial = true;
-                incremental = true;
-                requireMatrixJoined = false;
-              };
-              matrixToIrc = {
-                initial = true;
-                incremental = true;
-              };
-            };
-          };
-          # sync room description?
-          bridgeInfoState = {
-            enabled = true;
-            initial = true;
-          };
-
-          # hardcoded mappings, for when dynamicChannels fails us. TODO: probably safe to remove these.
-          # mappings = {
-          #   "#chat" = {
-          #     roomIds = [ "!GXJSOTdbtxRboGtDep:uninsane.org" ];
-          #   };
-          #   # BakaBT requires account registration, which i think means my user needs to be added before the appservice user
-          #   "#BakaBT" = {
-          #     roomIds = [ "!feZKttuYuHilqPFSkD:uninsane.org" ];
-          #   };
-          # };
-          # for per-user IRC password:
-          #   invite @irc_rizon_NickServ:uninsane.org to a DM and type `help`  => register
-          #   invite the matrix-appservice-irc user to a DM and type `!help`   => add PW to database
-          # passwordEncryptionKeyPath = "/path/to/privkey";  # appservice will generate its own if unspecified
-        };
-      };
-    };
-  };
-}

hosts/servo/services/matrix/synapse-log_level.yaml

@@ -1,27 +0,0 @@
-version: 1
-
-# In systemd's journal, loglevel is implicitly stored, so let's omit it
-# from the message text.
-formatters:
-    journal_fmt:
-        format: '%(name)s: [%(request)s] %(message)s'
-
-filters:
-    context:
-        (): synapse.util.logcontext.LoggingContextFilter
-        request: ""
-
-handlers:
-    journal:
-        class: systemd.journal.JournalHandler
-        formatter: journal_fmt
-        filters: [context]
-        SYSLOG_IDENTIFIER: synapse
-
-# default log level: INFO
-root:
-    level: WARN
-    handlers: [journal]
-
-disable_existing_loggers: False
-

hosts/servo/services/navidrome.nix

@@ -1,29 +0,0 @@
-{ ... }:
-
-{
-  sane.persist.sys.plaintext = [
-    # TODO: we don't have a static user allocated for navidrome!
-    # the chown would happen too early for us to set static perms
-    "/var/lib/private/navidrome"
-    # { user = "navidrome"; group = "navidrome"; directory = "/var/lib/private/navidrome"; }
-  ];
-  services.navidrome.enable = true;
-  services.navidrome.settings = {
-    # docs: https://www.navidrome.org/docs/usage/configuration-options/
-    Address = "127.0.0.1";
-    Port = 4533;
-    MusicFolder = "/var/lib/uninsane/media/Music";
-    CovertArtPriority = "*.jpg, *.JPG, *.png, *.PNG, embedded";
-    AutoImportPlaylists = false;
-    ScanSchedule = "@every 1h";
-  };
-
-  services.nginx.virtualHosts."music.uninsane.org" = {
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    locations."/".proxyPass = "http://127.0.0.1:4533";
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."music" = "native";
-}

hosts/servo/services/nginx.nix

@@ -1,166 +0,0 @@
-# docs: https://nixos.wiki/wiki/Nginx
-{ config, lib, pkgs, ... }:
-
-let
-  # make the logs for this host "public" so that they show up in e.g. metrics
-  publog = vhost: lib.attrsets.unionOfDisjoint vhost {
-    extraConfig = (vhost.extraConfig or "") + ''
-      access_log /var/log/nginx/public.log vcombined;
-    '';
-  };
-
-  # kTLS = true;  # in-kernel TLS for better perf
-in
-{
-
-  networking.firewall.allowedTCPPorts = [ 80 443 ];
-
-  services.nginx.enable = true;
-  services.nginx.appendConfig = ''
-    # use 1 process per core.
-    # may want to increase worker_connections too, but `ulimit -n` must be increased first.
-    worker_processes auto;
-  '';
-
-  # this is the standard `combined` log format, with the addition of $host
-  # so that we have the virtualHost in the log.
-  # KEEP IN SYNC WITH GOACCESS
-  # goaccess calls this VCOMBINED:
-  # - <https://gist.github.com/jyap808/10570005>
-  services.nginx.commonHttpConfig = ''
-    log_format vcombined '$host:$server_port $remote_addr - $remote_user [$time_local] "$request" $status $body_bytes_sent "$http_referrer" "$http_user_agent"';
-    access_log /var/log/nginx/private.log vcombined;
-  '';
-  # sets gzip_comp_level = 5
-  services.nginx.recommendedGzipSettings = true;
-  # enables OCSP stapling (so clients don't need contact the OCSP server -- i do instead)
-  # - doesn't seem to, actually: <https://www.ssllabs.com/ssltest/analyze.html?d=uninsane.org>
-  # caches TLS sessions for 10m
-  services.nginx.recommendedTlsSettings = true;
-  # enables sendfile, tcp_nopush, tcp_nodelay, keepalive_timeout 65
-  services.nginx.recommendedOptimisation = true;
-
-  # web blog/personal site
-  services.nginx.virtualHosts."uninsane.org" = publog {
-    root = "${pkgs.uninsane-dot-org}/share/uninsane-dot-org";
-    # a lot of places hardcode https://uninsane.org,
-    # and then when we mix http + non-https, we get CORS violations
-    # and things don't look right. so force SSL.
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    # for OCSP stapling
-    sslTrustedCertificate = "${pkgs.cacert}/etc/ssl/certs/ca-bundle.crt";
-
-    # uninsane.org/share/foo => /var/lib/uninsane/root/share/foo.
-    # yes, nginx does not strip the prefix when evaluating against the root.
-    locations."/share".root = "/var/lib/uninsane/root";
-
-    # allow matrix users to discover that @user:uninsane.org is reachable via matrix.uninsane.org
-    locations."= /.well-known/matrix/server".extraConfig =
-      let
-        # use 443 instead of the default 8448 port to unite
-        # the client-server and server-server port for simplicity
-        server = { "m.server" = "matrix.uninsane.org:443"; };
-      in ''
-        add_header Content-Type application/json;
-        return 200 '${builtins.toJSON server}';
-      '';
-    locations."= /.well-known/matrix/client".extraConfig =
-      let
-        client = {
-          "m.homeserver" =  { "base_url" = "https://matrix.uninsane.org"; };
-          "m.identity_server" =  { "base_url" = "https://vector.im"; };
-        };
-      # ACAO required to allow element-web on any URL to request this json file
-      in ''
-        add_header Content-Type application/json;
-        add_header Access-Control-Allow-Origin *;
-        return 200 '${builtins.toJSON client}';
-      '';
-
-    # static URLs might not be aware of .well-known (e.g. registration confirmation URLs),
-    # so hack around that.
-    locations."/_matrix" = {
-      proxyPass = "http://127.0.0.1:8008";
-    };
-    locations."/_synapse" = {
-      proxyPass = "http://127.0.0.1:8008";
-    };
-
-    # allow ActivityPub clients to discover how to reach @user@uninsane.org
-    # TODO: waiting on https://git.pleroma.social/pleroma/pleroma/-/merge_requests/3361/
-    # locations."/.well-known/nodeinfo" = {
-    #   proxyPass = "http://127.0.0.1:4000";
-    #   extraConfig = pleromaExtraConfig;
-    # };
-  };
-
-
-  # serve any site not listed above, if it's static.
-  # because we define it dynamically, SSL isn't trivial. support only http
-  # documented <https://nginx.org/en/docs/http/ngx_http_core_module.html#server_name>
-  services.nginx.virtualHosts."~^(?<domain>.+)$" = {
-    default = true;
-    addSSL = true;
-    enableACME = false;
-    sslCertificate = "/var/www/certs/wildcard/cert.pem";
-    sslCertificateKey = "/var/www/certs/wildcard/key.pem";
-    # sslCertificate = "/var/lib/acme/.minica/cert.pem";
-    # sslCertificateKey = "/var/lib/acme/.minica/key.pem";
-    # serverName = null;
-    locations."/" = {
-      # somehow this doesn't escape -- i get error 400 if i:
-      # curl 'http://..' --resolve '..:80:127.0.0.1'
-      root = "/var/www/sites/$domain";
-      # tryFiles = "$domain/$uri $domain/$uri/ =404";
-    };
-  };
-
-  security.acme.acceptTerms = true;
-  security.acme.defaults.email = "admin.acme@uninsane.org";
-
-  sane.persist.sys.plaintext = [
-    # TODO: mode?
-    { user = "acme"; group = "acme"; directory = "/var/lib/acme"; }
-    { user = "colin"; group = "users"; directory = "/var/www/sites"; }
-  ];
-
-  # let's encrypt default chain looks like:
-  # - End-entity certificate ← R3 ← ISRG Root X1 ← DST Root CA X3
-  # - <https://community.letsencrypt.org/t/production-chain-changes/150739>
-  # DST Root CA X3 expired in 2021 (?)
-  # the alternative chain is:
-  # - End-entity certificate ← R3 ← ISRG Root X1 (self-signed)
-  # using this alternative chain grants more compatibility for services like ejabberd
-  # but might decrease compatibility with very old clients that don't get updates (e.g. old android, iphone <= 4).
-  # security.acme.defaults.extraLegoFlags = [
-  security.acme.certs."uninsane.org" = rec {
-    # ISRG Root X1 results in lets encrypt sending the same chain as default,
-    # just without the final ISRG Root X1 ← DST Root CA X3 link.
-    # i.e. we could alternative clip the last item and achieve the exact same thing.
-    extraLegoRunFlags = [
-      "--preferred-chain" "ISRG Root X1"
-    ];
-    extraLegoRenewFlags = extraLegoRunFlags;
-  };
-  # TODO: alternatively, we could clip the last cert IF it's expired,
-  # optionally outputting that to a new cert file.
-  # security.acme.defaults.postRun = "";
-
-  # create a self-signed SSL certificate for use with literally any domain.
-  # browsers will reject this, but proxies and local testing tools can be configured
-  # to accept it.
-  system.activationScripts.generate-x509-self-signed.text = ''
-    mkdir -p /var/www/certs/wildcard
-    test -f /var/www/certs/wildcard/key.pem || ${pkgs.openssl}/bin/openssl \
-      req -x509 -newkey rsa:4096 \
-      -keyout /var/www/certs/wildcard/key.pem \
-      -out /var/www/certs/wildcard/cert.pem \
-      -sha256 -nodes -days 3650 \
-      -addext 'subjectAltName=DNS:*' \
-      -subj '/CN=self-signed'
-    chmod 640 /var/www/certs/wildcard/{key,cert}.pem
-    chown root:nginx /var/www/certs/wildcard /var/www/certs/wildcard/{key,cert}.pem
-  '';
-}

hosts/servo/services/nixserve.nix

@@ -1,21 +0,0 @@
-{ config, ... }:
-
-{
-  services.nginx.virtualHosts."nixcache.uninsane.org" = {
-    addSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    # serverAliases = [ "nixcache" ];
-    locations."/".extraConfig = ''
-      proxy_pass http://localhost:${toString config.services.nix-serve.port};
-      proxy_set_header Host $host;
-      proxy_set_header X-Real-IP $remote_addr;
-      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-    '';
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."nixcache" = "native";
-
-  sane.services.nixserve.enable = true;
-  sane.services.nixserve.sopsFile = ../../../secrets/servo.yaml;
-}

hosts/servo/services/prosody.nix

@@ -1,64 +0,0 @@
-# example configs:
-# - <https://github.com/kittywitch/nixfiles/blob/main/services/prosody.nix>
-# create users with:
-# - `sudo -u prosody prosodyctl adduser colin@uninsane.org`
-
-{ lib, ... }:
-
-# XXX disabled: doesn't send messages to nixnet.social (only receives them).
-# nixnet runs ejabberd, so revisiting that.
-lib.mkIf false
-{
-  sane.persist.sys.plaintext = [
-    { user = "prosody"; group = "prosody"; directory = "/var/lib/prosody"; }
-  ];
-  networking.firewall.allowedTCPPorts = [
-    5222  # XMPP client -> server
-    5269  # XMPP server -> server
-    5280  # bosh
-    5281  # Prosody HTTPS port  (necessary?)
-  ];
-
-  # provide access to certs
-  users.users.prosody.extraGroups = [ "nginx" ];
-
-  security.acme.certs."uninsane.org".extraDomainNames = [
-    "conference.xmpp.uninsane.org"
-    "upload.xmpp.uninsane.org"
-  ];
-
-  services.prosody = {
-    enable = true;
-    admins = [ "colin@uninsane.org" ];
-    # allowRegistration = false;
-    # extraConfig = ''
-    #   s2s_require_encryption = true
-    #   c2s_require_encryption = true
-    # '';
-
-    extraModules = [ "private" "vcard" "privacy" "compression" "component" "muc" "pep" "adhoc" "lastactivity" "admin_adhoc" "blocklist"];
-
-    ssl.cert = "/var/lib/acme/uninsane.org/fullchain.pem";
-    ssl.key = "/var/lib/acme/uninsane.org/key.pem";
-
-    muc = [
-      {
-        domain = "conference.xmpp.uninsane.org";
-      }
-    ];
-    uploadHttp.domain = "upload.xmpp.uninsane.org";
-
-    virtualHosts = {
-      localhost = {
-        domain = "localhost";
-        enabled = true;
-      };
-      "xmpp.uninsane.org" = {
-        domain = "uninsane.org";
-        enabled = true;
-        ssl.cert = "/var/lib/acme/uninsane.org/fullchain.pem";
-        ssl.key = "/var/lib/acme/uninsane.org/key.pem";
-      }; 
-    };
-  };
-}

hosts/servo/services/transmission.nix

@@ -1,80 +0,0 @@
-{ pkgs, ... }:
-
-{
-  sane.persist.sys.plaintext = [
-    # TODO: mode? we need this specifically for the stats tracking in .config/
-    { user = "transmission"; group = "transmission"; directory = "/var/lib/transmission"; }
-  ];
-  services.transmission.enable = true;
-  services.transmission.settings = {
-    rpc-bind-address = "0.0.0.0";
-    #rpc-host-whitelist = "bt.uninsane.org";
-    #rpc-whitelist = "*.*.*.*";
-    rpc-authentication-required = true;
-    rpc-username = "colin";
-    # salted pw. to regenerate, set this plaintext, run nixos-rebuild, and then find the salted pw in:
-    # /var/lib/transmission/.config/transmission-daemon/settings.json
-    rpc-password = "{503fc8928344f495efb8e1f955111ca5c862ce0656SzQnQ5";
-    rpc-whitelist-enabled = false;
-
-    # download-dir = "/opt/uninsane/media/";
-    # hopefully, make the downloads world-readable
-    umask = 0;
-
-    # force peer connections to be encrypted
-    encryption = 2;
-
-    # units in kBps
-    speed-limit-down = 3000;
-    speed-limit-down-enabled = true;
-    speed-limit-up = 300;
-    speed-limit-up-enabled = true;
-
-    # see: https://git.zknt.org/mirror/transmission/commit/cfce6e2e3a9b9d31a9dafedd0bdc8bf2cdb6e876?lang=bg-BG
-    anti-brute-force-enabled = false;
-
-    download-dir = "/var/lib/uninsane/media";
-    incomplete-dir = "/var/lib/uninsane/media/incomplete";
-
-  };
-  # transmission will by default not allow the world to read its files.
-  services.transmission.downloadDirPermissions = "775";
-
-  systemd.services.transmission.after = [ "wireguard-wg0.service" ];
-  systemd.services.transmission.partOf = [ "wireguard-wg0.service" ];
-  systemd.services.transmission.serviceConfig = {
-    # run this behind the OVPN static VPN
-    NetworkNamespacePath = "/run/netns/ovpns";
-    LogLevelMax = "warning";
-  };
-
-  # service to automatically backup torrents i add to transmission
-  systemd.services.backup-torrents = {
-    description = "archive torrents to storage not owned by transmission";
-    script = ''
-      ${pkgs.rsync}/bin/rsync -arv /var/lib/transmission/.config/transmission-daemon/torrents/ /var/backup/torrents/
-    '';
-  };
-  systemd.timers.backup-torrents = {
-    wantedBy = [ "multi-user.target" ];
-    timerConfig = {
-      OnStartupSec = "11min";
-      OnUnitActiveSec = "240min";
-    };
-  };
-
-  # transmission web client
-  services.nginx.virtualHosts."bt.uninsane.org" = {
-    # basicAuth is literally cleartext user/pw, so FORCE this to happen over SSL
-    forceSSL = true;
-    enableACME = true;
-    # inherit kTLS;
-    locations."/" = {
-      # proxyPass = "http://ovpns.uninsane.org:9091";
-      proxyPass = "http://10.0.1.6:9091";
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."bt" = "native";
-}
-

hosts/servo/services/trust-dns.nix

@@ -1,66 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  sane.services.trust-dns.enable = true;
-
-  sane.services.trust-dns.listenAddrsIPv4 = [
-    # specify each address explicitly, instead of using "*".
-    # this ensures responses are sent from the address at which the request was received.
-    "192.168.0.5"
-    "10.0.1.5"
-  ];
-
-  sane.services.trust-dns.zones."uninsane.org".TTL = 900;
-
-  # SOA record structure: <https://en.wikipedia.org/wiki/SOA_record#Structure>
-  # SOA MNAME RNAME (... rest)
-  # MNAME = Master name server for this zone. this is where update requests should be sent.
-  # RNAME = admin contact (encoded email address)
-  # Serial = YYYYMMDDNN, where N is incremented every time this file changes, to trigger secondary NS to re-fetch it.
-  # Refresh = how frequently secondary NS should query master
-  # Retry = how long secondary NS should wait until re-querying master after a failure (must be < Refresh)
-  # Expire = how long secondary NS should continue to reply to queries after master fails (> Refresh + Retry)
-  sane.services.trust-dns.zones."uninsane.org".inet = {
-    SOA."@" = ''
-      ns1.uninsane.org. admin-dns.uninsane.org. (
-                                      2022122101 ; Serial
-                                      4h         ; Refresh
-                                      30m        ; Retry
-                                      7d         ; Expire
-                                      5m)        ; Negative response TTL
-    '';
-    TXT."rev" = "2022122101";
-
-    # XXX NS records must also not be CNAME
-    # it's best that we keep this identical, or a superset of, what org. lists as our NS.
-    # so, org. can specify ns2/ns3 as being to the VPN, with no mention of ns1. we provide ns1 here.
-    A."ns1" =    "%NATIVE%";
-    A."ns2" =    "185.157.162.178";
-    A."ns3" =    "185.157.162.178";
-    A."ovpns" =  "185.157.162.178";
-    A."native" = "%NATIVE%";
-    A."@" =      "%NATIVE%";
-    NS."@" = [
-      "ns1.uninsane.org."
-      "ns2.uninsane.org."
-      "ns3.uninsane.org."
-    ];
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".file =
-    "/var/lib/trust-dns/uninsane.org.zone";
-
-  systemd.services.trust-dns.preStart = let
-    sed = "${pkgs.gnused}/bin/sed";
-    zone-dir = "/var/lib/trust-dns";
-    zone-out = "${zone-dir}/uninsane.org.zone";
-    zone-template = pkgs.writeText "uninsane.org.zone.in" config.sane.services.trust-dns.generatedZones."uninsane.org";
-  in ''
-    # make WAN records available to trust-dns
-    mkdir -p ${zone-dir}
-    ip=$(cat '${config.sane.services.dyn-dns.ipPath}')
-    ${sed} s/%NATIVE%/$ip/ ${zone-template} > ${zone-out}
-  '';
-
-  sane.services.dyn-dns.restartOnChange = [ "trust-dns.service" ];
-}

hosts/servo/services/wikipedia.nix

@@ -1,31 +0,0 @@
-# docs: <https://nixos.wiki/wiki/MediaWiki>
-{ config, lib, ... }:
-
-# XXX: working to host wikipedia with kiwix instead of mediawiki
-# mediawiki does more than i need and isn't obviously superior in any way
-# except that the dumps are more frequent/up-to-date.
-lib.mkIf false
-{
-  sops.secrets."mediawiki_pw" = {
-    owner = config.users.users.mediawiki.name;
-    sopsFile = ../../../secrets/servo.yaml;
-  };
-
-  services.mediawiki.enable = true;
-  services.mediawiki.name = "Uninsane Wiki";
-  services.mediawiki.passwordFile = config.sops.secrets.mediawiki_pw.path;
-  services.mediawiki.extraConfig = ''
-    # Disable anonymous editing
-    $wgGroupPermissions['*']['edit'] = false;
-  '';
-  services.mediawiki.virtualHost.listen = [
-    {
-      ip = "127.0.0.1";
-      port = 8013;
-      ssl = false;
-    }
-  ];
-  services.mediawiki.virtualHost.hostName = "w.uninsane.org";
-  services.mediawiki.virtualHost.adminAddr = "admin+mediawiki@uninsane.org";
-  # services.mediawiki.extensions = TODO: wikipedia sync extension?
-}

image.nix

@@ -0,0 +1,21 @@
+{ config, lib, pkgs, modulesPath, ... }:
+{
+  fileSystems."/" = {
+    # boot by label instead of unpredictable uuid
+    device = "/dev/disk/by-label/nixos-img";
+    # make-disk-image only supports ext4
+    fsType = "ext4";
+  };
+  # fileSystems."/boot".device = "/dev/vda1";
+  fileSystems."/boot".device = "/dev/disk/by-label/ESP";
+
+  system.build.raw = import "${toString modulesPath}/../lib/make-disk-image.nix" {
+    inherit lib config pkgs;
+    partitionTableType = "efi";
+    label = "nixos-img";
+    fsType = config.fileSystems."/".fsType;
+    diskSize = "auto";
+    format = "raw";
+  };
+}
+

machines/desko/default.nix

@@ -0,0 +1,25 @@
+{ config, pkgs, lib, ... }:
+{
+  imports = [
+    ./../../helpers/universal
+    ./../../helpers/hardware-x86_64.nix
+    # ./../../helpers/gui/gnome.nix
+    #./../../helpers/gui/i3.nix
+    ./../../helpers/gui/sway.nix
+    ./fs.nix
+  ];
+
+  home-manager.users.colin = import ./../../helpers/home-manager-gen-colin.nix {
+    inherit pkgs lib;
+    system = "x86_64-linux";
+    # gui = "gnome";
+    # gui = "i3";
+    gui = "sway";
+    extraPackages = [
+      pkgs.electrum
+    ];
+  };
+
+  # docs: https://nixos.org/manual/nixos/stable/options.html#opt-system.stateVersion
+  system.stateVersion = "21.05";
+}

machines/desko/fs.nix

@@ -0,0 +1,17 @@
+{ config, pkgs, lib, ... }:
+
+{
+  fileSystems."/" = lib.mkDefault {
+    device = "/dev/disk/by-uuid/d969ee61-12cf-4490-be07-4440c7be593f";
+    fsType = "btrfs";
+    options = [
+      "compress=zstd"
+      "defaults"
+    ];
+  };
+
+  fileSystems."/boot" = {
+    device = lib.mkDefault "/dev/disk/by-uuid/F826-6192";
+    fsType = "vfat";
+  };
+}

machines/lappy/default.nix

@@ -0,0 +1,18 @@
+{ config, pkgs, lib, ... }:
+{
+  imports = [
+    ./../../helpers/universal
+    ./../../helpers/hardware-x86_64.nix
+    ./../../helpers/gui/gnome.nix
+    ./fs.nix
+  ];
+
+  home-manager.users.colin = import ./../../helpers/home-manager-gen-colin.nix {
+    inherit pkgs lib;
+    system = "x86_64-linux";
+    gui = "gnome";
+  };
+
+  # docs: https://nixos.org/manual/nixos/stable/options.html#opt-system.stateVersion
+  system.stateVersion = "21.05";
+}

machines/lappy/fs.nix

@@ -0,0 +1,17 @@
+{ config, pkgs, lib, ... }:
+
+{
+  fileSystems."/" = lib.mkDefault {
+    device = "/dev/disk/by-uuid/75230e56-2c69-4e41-b03e-68475f119980";
+    fsType = "btrfs";
+    options = [
+      "compress=zstd"
+      "defaults"
+    ];
+  };
+
+  fileSystems."/boot" = {
+    device = lib.mkDefault "/dev/disk/by-uuid/BD79-D6BB";
+    fsType = "vfat";
+  };
+}

machines/moby/default.nix

@@ -0,0 +1,56 @@
+{ config, pkgs, lib, ... }:
+{
+  imports = [
+    ./../../helpers/universal
+    ./../../helpers/gui/phosh.nix
+    # ./../../helpers/gui/plasma-mobile.nix
+    # ./../../helpers/gui/gnome.nix
+  ];
+
+  # XXX colin: phosh doesn't work well with passwordless login
+  users.users.colin.initialPassword = "147147";
+
+  home-manager.users.colin = import ./../../helpers/home-manager-gen-colin.nix {
+    inherit pkgs lib;
+    system = "aarch64-linux";
+    gui = "phosh";
+    extraPackages = [
+      # for web browsers see: https://forum.pine64.org/showthread.php?tid=13669
+      pkgs.angelfish  # plasma mobile web browser; broken on phosh (poor wayland support)
+      # pkgs.plasma5Packages.index  # file browser
+      pkgs.plasma5Packages.konsole  # terminal
+      # pkgs.plasma5Packages.pix  # picture viewer
+      pkgs.plasma5Packages.kalk  # calculator; broken on phosh
+      # pkgs.plasma5Packages.buho  # (plasma mobile?) note application
+      pkgs.plasma5Packages.kasts  #  podcast app; works on phosh after setting QT envar
+      pkgs.plasma5Packages.koko  # image gallery; broken on phosh
+      pkgs.plasma5Packages.kwave  # media player.
+      # pkgs.plasma5Packages.neochat  #  matrix client. needs qcoro => no aarch64 support
+      # pkgs.plasma5Packages.plasma-dialer  # phone dialer
+      # pkgs.plasma5Packages.plasma-mobile  # the whole shebang?
+      # pkgs.plasma5Packages.plasma-settings
+      pkgs.plasma5Packages.bomber  # arcade game; broken on phosh
+      pkgs.plasma5Packages.kapman  # pacman
+      pkgs.w3m  # text-based web browser; works!
+      pkgs.st  # suckless terminal; broken on phosh
+      # pkgs.alacritty  # terminal; crashes phosh
+    ];
+  };
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "21.11"; # Did you read the comment?
+
+  # defined: https://www.freedesktop.org/software/systemd/man/machine-info.html
+  # XXX colin: not sure which, if any, software makes use of this
+  environment.etc."machine-info".text = ''
+    CHASSIS="handset"
+  '';
+
+  # enable rotation sensor
+  hardware.sensor.iio.enable = true;
+}

machines/uninsane/default.nix

@@ -0,0 +1,39 @@
+{ pkgs, lib, ... }:
+
+{
+  imports = [
+    ./../../helpers/universal
+    ./fs.nix
+    ./hardware.nix
+    ./net.nix
+    ./users.nix
+    ./services/ddns-he.nix
+    ./services/duplicity.nix
+    ./services/gitea.nix
+    ./services/jackett.nix
+    ./services/jellyfin.nix
+    ./services/matrix.nix
+    ./services/nginx.nix
+    ./services/nix-serve.nix
+    ./services/pleroma.nix
+    ./services/postfix.nix
+    ./services/postgres.nix
+    ./services/transmission.nix
+  ];
+
+  home-manager.users.colin = import ../../helpers/home-manager-gen-colin.nix {
+    inherit pkgs lib;
+    system = "aarch64-linux";
+    gui = null;
+    extraPackages = [ pkgs.matrix-synapse ];
+  };
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "21.11"; # Did you read the comment?
+}
+

machines/uninsane/fs.nix

@@ -0,0 +1,37 @@
+{ config, pkgs, lib, ... }:
+
+{
+  fileSystems."/" = lib.mkDefault {
+    device = "/dev/disk/by-uuid/2be70d38-79f4-41b6-bee2-bce5a25f8f7b";
+    fsType = "ext4";
+  };
+  fileSystems."/boot" = {
+    device = lib.mkDefault "/dev/disk/by-uuid/B318-A67E";
+    fsType = "vfat";
+  };
+
+
+  fileSystems."/var/lib/pleroma" = {
+    device = "/opt/pleroma";
+    options = [ "bind" ];
+  };
+
+  fileSystems."/var/lib/transmission/Downloads" = {
+    device = "/opt/uninsane/media";
+    options = [ "bind" ];
+  };
+  fileSystems."/var/lib/transmission/.incomplete" = {
+    device = "/opt/uninsane/media/incomplete";
+    options = [ "bind" ];
+  };
+
+  # in-memory compressed RAM (seems to be dynamically sized)
+  zramSwap = {
+    enable = true;
+  };
+
+  swapDevices = [
+    { device = "/swapfile"; size = 4096; }
+  ];
+}
+

machines/uninsane/hardware.nix

@@ -0,0 +1,94 @@
+# this file originates from ‘nixos-generate-config’
+# but has been heavily modified
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  # enables non-free firmware
+  hardware.enableRedistributableFirmware = true;
+
+  # i changed this becuse linux 5.10 didn't have rpi-400 device tree blob.
+  # nixos-22.05 linux 5.15 DOES have these now.
+  # it should be possible to remove this if desired, but i'm not sure how the rpi-specific kernel differs.
+  # see: https://github.com/raspberrypi/linux
+  boot.kernelPackages = pkgs.linuxPackages_rpi4;
+
+  # NixOS defaults to grub: we don't want that.
+  boot.loader.grub.enable = false;
+  # raspberryPi boot loader creates extlinux.conf.
+  #   otherwise, enable the generic-extlinux-compatible loader below.
+  # note: THESE ARE MUTUALLY EXCLUSIVE. generic-extlinux-compatible causes uboot to not be built
+  # boot.loader.generic-extlinux-compatible.enable = true;
+  boot.loader.raspberryPi.enable = true;
+  boot.loader.raspberryPi.uboot.enable = true;
+  boot.loader.raspberryPi.version = 4;
+
+  boot.initrd.availableKernelModules = [
+    "bcm2711_thermal"
+    "bcm_phy_lib"
+    "brcmfmac"
+    "brcmutil"
+    "broadcom"
+    "clk_raspberrypi"
+    "drm"  # Direct Render Manager
+    "enclosure"  # SCSI ?
+    "fuse"
+    "mdio_bcm_unimac"
+    "pcie_brcmstb"
+    "raspberrypi_cpufreq"
+    "raspberrypi_hwmon"
+    "ses"  # SCSI Enclosure Services
+    "uas"  # USB attached storage
+    "uio"  # userspace IO
+    "uio_pdrv_genirq"
+    "xhci_pci"
+    "xhci_pci_renesas"
+  ];
+  # boot.initrd.compressor = "gzip";  # defaults to zstd
+  # hack in the `boot.shell_on_fail` arg since it doesn't seem to work otherwise
+  boot.initrd.preFailCommands = "allowShell=1";
+  # default: 4 (warn). 7 is debug
+  boot.consoleLogLevel = 7;
+  # boot.kernelParams = [
+  #   "boot.shell_on_fail"
+  #   # "boot.trace"
+  #   # "systemd.log_level=debug"
+  #   # "systemd.log_target=console"
+  # ];
+
+  # ondemand power scaling keeps the cpu at low frequency when idle, and sets to max frequency
+  # when load is detected. (v.s. the "performance" default, which always uses the max frequency)
+  powerManagement.cpuFreqGovernor = "ondemand";
+
+  # XXX colin: this allows one to `systemctl halt` and then not remove power until the HDD has spun down.
+  # however, it doesn't work with reboot because systemd will spin the drive up again to read its reboot bin.
+  # a better solution would be to put the drive behind a powered USB hub (or get a SSD).
+  # systemd.services.diskguard = {
+  #   description = "Safely power off spinning media";
+  #   before = [ "shutdown.target" ];
+  #   wantedBy = [ "sysinit.target" ];
+  #   # old (creates dep loop, but works)
+  #   # before = [ "systemd-remount-fs.service" "shutdown.target" ];
+  #   # wantedBy = [ "systemd-remount-fs.service" ];
+  #   serviceConfig = {
+  #     Type = "oneshot";
+  #     RemainAfterExit = true;
+  #     ExecStart = "${pkgs.coreutils}/bin/true";
+  #     ExecStop = with pkgs; writeScript "diskguard" ''
+  #       #!${bash}/bin/bash
+  #       if ${procps}/bin/pgrep nixos-rebuild ;
+  #       then
+  #         exit 0  # don't halt drives unless we're actually shutting down. maybe better way to do this (check script args?)
+  #       fi
+  #       # ${coreutils}/bin/sync
+  #       # ${util-linux}/bin/mount -o remount,ro /nix/store
+  #       # ${util-linux}/bin/mount -o remount,ro /
+  #       # -S 1 retracts the spindle after 5 seconds of idle
+  #       # -B 1 spins down the drive after <vendor specific duration>
+  #       ${hdparm}/sbin/hdparm -S 1 -B 1 /dev/sda
+  #       # TODO: monitor smartmonctl until disk is idle? or try hdparm -Y
+  #       # ${coreutils}/bin/sleep 20
+  #       # exec ${util-linux}/bin/umount --all -t ext4,vfat,ext2
+  #     '';
+  #   };
+  # };
+}

machines/uninsane/net.nix

@@ -0,0 +1,132 @@
+{ config, pkgs, secrets, ... }:
+
+{
+  networking.domain = "uninsane.org";
+
+  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
+  # Per-interface useDHCP will be mandatory in the future, so this generated config
+  # replicates the default behaviour.
+  networking.useDHCP = false;
+  networking.interfaces.eth0.useDHCP = true;
+  # XXX colin: probably don't need this. wlan0 won't be populated unless i touch a value in networking.interfaces.wlan0
+  networking.wireless.enable = false;
+
+  # networking.firewall.enable = false;
+  networking.firewall.enable = true;
+  networking.firewall.allowedTCPPorts = [
+    25   # SMTP
+    80   # HTTP
+    143  # IMAP
+    443  # HTTPS
+    465  # SMTPS (maybe not required?)
+    587  # SMTPS/submission (maybe not required?)
+    993  # IMAPS
+  ];
+  # DLNA ports: https://jellyfin.org/docs/general/networking/index.html
+  networking.firewall.allowedUDPPorts = [ 1900 7359 ];
+
+  # we need to use externally-visible nameservers in order for VPNs to be able to resolve hosts.
+  networking.nameservers = [
+    "1.1.1.1"
+    "9.9.9.9"
+  ];
+
+  # OVPN CONFIG (https://www.ovpn.com):
+  # DOCS: https://nixos.wiki/wiki/WireGuard
+  networking.wireguard.enable = true;
+  networking.wireguard.interfaces.wg0 = {
+    privateKey = secrets.wireguard.privateKey;
+    # wg is active only in this namespace.
+    # run e.g. ip netns exec ovpns <some command like ping/curl/etc, it'll go through wg>
+    #   sudo ip netns exec ovpns ping www.google.com
+    # note: without the namespace, you'll need to add a specific route through eth0 for the peer (185.157.162.178/32)
+    interfaceNamespace = "ovpns";
+    preSetup = "${pkgs.iproute2}/bin/ip netns add ovpns || true";
+    postShutdown = "${pkgs.iproute2}/bin/ip netns delete ovpns";
+    ips = [
+      "185.157.162.178/32"
+    ];
+    peers = [
+      {
+        publicKey = "SkkEZDCBde22KTs/Hc7FWvDBfdOCQA4YtBEuC3n5KGs=";
+        endpoint = "vpn36.prd.amsterdam.ovpn.com:9930";
+        allowedIPs = [ "0.0.0.0/0" ];
+        # nixOS says this is important for keeping NATs active
+        persistentKeepalive = 25;
+      }
+    ];
+  };
+
+  systemd.services.wg0veth = {
+    description = "veth pair to allow communication between host and wg0 netns";
+    after = [ "wireguard-wg0.service" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      Type = "oneshot";
+      RemainAfterExit = true;
+
+      ExecStart = with pkgs; writeScript "wg0veth-start" ''
+        #!${bash}/bin/bash
+        # create veth pair
+        ${iproute2}/bin/ip link add ovpns-veth-a type veth peer name ovpns-veth-b
+        ${iproute2}/bin/ip addr add 10.0.1.5/24 dev ovpns-veth-a
+        ${iproute2}/bin/ip link set ovpns-veth-a up
+        # mv veth-b into the ovpns namespace
+        ${iproute2}/bin/ip link set ovpns-veth-b netns ovpns
+        ${iproute2}/bin/ip -n ovpns addr add 10.0.1.6/24 dev ovpns-veth-b
+        ${iproute2}/bin/ip -n ovpns link set ovpns-veth-b up
+        # forward HTTP traffic, which we need for letsencrypt to work
+        ${iproute2}/bin/ip netns exec ovpns ${socat}/bin/socat TCP4-LISTEN:80,reuseaddr,fork,su=nobody TCP4:10.0.1.5:80 &
+      '';
+
+      ExecStop = with pkgs; writeScript "wg0veth-stop" ''
+        #!${bash}/bin/bash
+        ${iproute2}/bin/ip -n wg0 link del ovpns-veth-b
+        ${iproute2}/bin/ip link del ovpns-veth-a
+      '';
+    };
+  };
+
+  # HURRICANE ELECTRIC CONFIG:
+  # networking.sits = {
+  #   hurricane = {
+  #     remote = "216.218.226.238";
+  #     local = "192.168.0.5";
+  #     # local = "10.0.0.5";
+  #     # remote = "10.0.0.1";
+  #     # local = "10.0.0.22";
+  #     dev = "eth0";
+  #     ttl = 255;
+  #   };
+  # };
+  # networking.interfaces."hurricane".ipv6 = {
+  #   addresses = [
+  #     # mx.uninsane.org (publically routed /64)
+  #     {
+  #       address = "2001:470:b:465::1";
+  #       prefixLength = 128;
+  #     }
+  #     # client addr
+  #     # {
+  #     #   address = "2001:470:a:466::2";
+  #     #   prefixLength = 64;
+  #     # }
+  #   ];
+  #   routes = [
+  #     {
+  #       address = "::";
+  #       prefixLength = 0;
+  #       # via = "2001:470:a:466::1";
+  #     }
+  #   ];
+  # };
+
+  # # after configuration, we want the hurricane device to look like this:
+  # # hurricane: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
+  # #            inet6 2001:470:a:450::2  prefixlen 64  scopeid 0x0<global>
+  # #            inet6 fe80::c0a8:16  prefixlen 64  scopeid 0x20<link>
+  # #            sit  txqueuelen 1000  (IPv6-in-IPv4)
+  # # test with:
+  # #   curl --interface hurricane http://[2607:f8b0:400a:80b::2004]
+  # #   ping 2607:f8b0:400a:80b::2004
+}

machines/uninsane/services/ddns-he.nix

@@ -0,0 +1,20 @@
+{ pkgs, secrets, ... }:
+
+{
+  systemd.services.ddns-he = {
+    description = "update dynamic DNS entries for HurricaneElectric";
+    # HE DDNS API is documented: https://dns.he.net/docs.html
+    script = let
+      pass = secrets.ddns-he.password;
+      crl = "${pkgs.curl}/bin/curl -4";
+    in ''
+      ${crl} "https://he.uninsane.org:${pass}@dyn.dns.he.net/nic/update?hostname=he.uninsane.org"
+      ${crl} "https://native.uninsane.org:${pass}@dyn.dns.he.net/nic/update?hostname=native.uninsane.org"
+      ${crl} "https://uninsane.org:${pass}@dyn.dns.he.net/nic/update?hostname=uninsane.org"
+    '';
+  };
+  systemd.timers.ddns-he.timerConfig = {
+    OnStartupSec = "2min";
+    OnUnitActiveSec = "10min";
+  };
+}

machines/uninsane/services/duplicity.nix

@@ -0,0 +1,36 @@
+# docs: https://search.nixos.org/options?channel=21.11&query=duplicity
+{ config, pkgs, lib, secrets, ... }:
+
+{
+  services.duplicity.enable = true;
+  services.duplicity.targetUrl = secrets.duplicity.url;
+  # format: PASSPHRASE=<cleartext>
+  # two sisters
+  services.duplicity.secretFile =
+    builtins.toFile "duplicity_env" "PASSPHRASE=${secrets.duplicity.passphrase}";
+  # NB: manually trigger with `systemctl start duplicity`
+  services.duplicity.frequency = "daily";
+  services.duplicity.exclude = [
+    # impermanent/inconsequential data:
+    "/dev"
+    "/proc"
+    "/run"
+    "/sys"
+    "/tmp"
+    # bind mounted (dupes):
+    "/var/lib/pleroma"
+    "/var/lib/transmission/Downloads"
+    "/var/lib/transmission/.incomplete"
+    # data that's not worth the cost to backup:
+    "/opt/uninsane/media"
+  ];
+
+  services.duplicity.extraFlags = [
+    # without --allow-source-mismatch, duplicity will abort if you change the hostname between backups
+    "--allow-source-mismatch"
+  ];
+
+  # set this for the FIRST backup, then remove it to enable incremental backups
+  #   (that the first backup *isn't* full i think is a defect)
+  # services.duplicity.fullIfOlderThan = "always";
+}

machines/uninsane/services/gitea.nix

@@ -1,10 +1,6 @@
 { config, pkgs, lib, ... }:
 
 {
-  sane.persist.sys.plaintext = [
-    # TODO: mode? could be more granular
-    { user = "git"; group = "gitea"; directory = "/var/lib/gitea"; }
-  ];
   services.gitea.enable = true;
   services.gitea.user = "git";  # default is 'gitea'
   services.gitea.database.type = "postgres";
@@ -12,7 +8,7 @@
   services.gitea.appName = "Perfectly Sane Git";
   services.gitea.domain = "git.uninsane.org";
   services.gitea.rootUrl = "https://git.uninsane.org/";
-  services.gitea.settings.session.COOKIE_SECURE = true;
+  services.gitea.cookieSecure = true;
   # services.gitea.disableRegistration = true;
 
   services.gitea.settings = {
@@ -59,7 +55,7 @@
     };
   };
   # options: "Trace", "Debug", "Info", "Warn", "Error", "Critical"
-  services.gitea.settings.log.LEVEL = "Warn";
+  services.gitea.log.level = "Info";
 
   systemd.services.gitea.serviceConfig = {
     # nix default is AF_UNIX AF_INET AF_INET6.
@@ -71,18 +67,4 @@
       "/var/lib/gitea"
     ];
   };
-
-  # hosted git (web view and for `git <cmd>` use
-  # TODO: enable publog?
-  services.nginx.virtualHosts."git.uninsane.org" = {
-    forceSSL = true;  # gitea complains if served over a different protocol than its config file says
-    enableACME = true;
-    # inherit kTLS;
-
-    locations."/" = {
-      proxyPass = "http://127.0.0.1:3000";
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."git" = "native";
 }

machines/uninsane/services/jackett.nix

@@ -0,0 +1,14 @@
+{ config, pkgs, lib, ... }:
+
+{
+  services.jackett.enable = true;
+
+  systemd.services.jackett.after = ["wg0veth.service"];
+  systemd.services.jackett.serviceConfig = {
+    # run this behind the OVPN static VPN
+    NetworkNamespacePath = "/run/netns/ovpns";
+    # patch jackett to listen on the public interfaces
+    # ExecStart = lib.mkForce "${pkgs.jackett}/bin/Jackett --NoUpdates --DataFolder /var/lib/jackett/.config/Jackett --ListenPublic";
+  };
+}
+

machines/uninsane/services/jellyfin.nix

@@ -0,0 +1,5 @@
+{ config, pkgs, lib, ... }:
+
+{
+  services.jellyfin.enable = true;
+}

machines/uninsane/services/matrix.nix

@@ -0,0 +1,175 @@
+# docs: https://nixos.wiki/wiki/Matrix
+# docs: https://nixos.org/manual/nixos/stable/index.html#module-services-matrix-synapse
+{ config, pkgs, lib, secrets, ... }:
+
+{
+  services.matrix-synapse.enable = true;
+  services.matrix-synapse.settings.server_name = "uninsane.org";
+
+  # services.matrix-synapse.enable_registration_captcha = true;
+  # services.matrix-synapse.enable_registration_without_verification = true;
+  services.matrix-synapse.settings.enable_registration = true;
+  # services.matrix-synapse.registration_shared_secret = "<shared key goes here>";
+
+  # default for listeners is port = 8448, tls = true, x_forwarded = false.
+  # we change this because the server is situated behind nginx.
+  services.matrix-synapse.settings.listeners = [
+    {
+      port = 8008;
+      bind_addresses = [ "127.0.0.1" ];
+      type = "http";
+      tls = false;
+      x_forwarded = true;
+      resources = [
+        {
+          names = [ "client" "federation" ];
+          compress = false;
+        }
+      ];
+    }
+  ];
+
+  # services.matrix-synapse.extraConfig = ''
+  #   registration_requires_token: true
+  #   admin_contact: "admin.matrix@uninsane.org"
+  # '';
+
+  services.matrix-synapse.settings.admin_contact = "admin.matrix@uninsane.org";
+  services.matrix-synapse.settings.registrations_require_3pid = [ "email" ];
+  services.matrix-synapse.settings.email = {
+    smtp_host = "mx.uninsane.org";
+    smtp_port = 587;
+    smtp_user = "matrix-synapse";
+    smtp_pass = secrets.matrix-synapse.smtp_pass;
+    require_transport_security = true;
+    enable_tls = true;
+    notif_from = "%(app)s <notify.matrix@uninsane.org>";
+    app_name = "Uninsane Matrix";
+    enable_notifs = true;
+    validation_token_lifetime = "96h";
+    invite_client_location = "https://web.matrix.uninsane.org";
+    subjects = {
+      email_validation = "[%(server_name)s] Validate your email";
+    };
+  };
+
+  # services.matrix-synapse.extraConfigFiles = [builtins.toFile "matrix-synapse-extra-config" ''
+  #   admin_contact: "admin.matrix@uninsane.org"
+  #   registrations_require_3pid:
+  #     - email
+  #   email:
+  #     smtp_host: "mx.uninsane.org"
+  #     smtp_port: 587
+  #     smtp_user: "matrix-synapse"
+  #     smtp_pass: "${secrets.matrix-synapse.smtp_pass}"
+  #     require_transport_security: true
+  #     enable_tls: true
+  #     notif_from: "%(app)s <notify.matrix@uninsane.org>"
+  #     app_name: "Uninsane Matrix"
+  #     enable_notifs: true
+  #     validation_token_lifetime: 96h
+  #     invite_client_location: "https://web.matrix.uninsane.org"
+  #     subjects:
+  #       email_validation: "[%(server_name)s] Validate your email"
+  # ''];
+  services.matrix-synapse.settings.app_service_config_files = [
+    "/var/lib/matrix-appservice-irc/registration.yml"  # auto-created by irc appservice
+  ];
+
+  # new users may be registered on the CLI:
+  #   register_new_matrix_user -c /nix/store/8n6kcka37jhmi4qpd2r03aj71pkyh21s-homeserver.yaml http://localhost:8008
+  #
+  # or provide an registration token then can use to register through the client.
+  #   docs: https://github.com/matrix-org/synapse/blob/develop/docs/usage/administration/admin_api/registration_tokens.md
+  # first, grab your own user's access token (Help & About section in Element). then:
+  #   curl --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens
+  # create a token with unlimited uses:
+  #   curl -d '{}' --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens/new
+  # create a token with limited uses:
+  #   curl -d '{ "uses_allowed": 1 }' --header "Authorization: Bearer <my_token>" localhost:8008/_synapse/admin/v1/registration_tokens/new
+
+  # IRC bridging
+  # note: Rizon allows only FOUR simultaneous IRC connections per IP: https://wiki.rizon.net/index.php?title=Connection/Session_Limit_Exemptions
+  # Rizon supports CertFP for auth: https://wiki.rizon.net/index.php?title=CertFP
+  # services.matrix-appservice-irc.enable = true;
+  services.matrix-appservice-irc.registrationUrl = "http://127.0.0.1:8009";
+  # settings documented here: https://github.com/matrix-org/matrix-appservice-irc/blob/develop/config.sample.yaml
+  services.matrix-appservice-irc.settings = {
+    homeserver = {
+      url = "http://127.0.0.1:8008";
+      dropMatrixMessagesAfterSecs = 300;
+      domain = "uninsane.org";
+      enablePresence = true;
+      bindPort = 9999;
+      bindHost = "127.0.0.1";
+    };
+
+    ircService = {
+      servers = {
+        "irc.rizon.net" = {
+          name = "Rizon";
+          port = 6697;  # SSL port
+          ssl = true;
+          sasl = true;  # appservice doesn't support NickServ identification
+          botConfig = {
+            # bot has no presence in IRC channel; only real Matrix users
+            enabled = false;
+            # nick = "UninsaneDotOrg";
+            nick = "uninsane";
+            username = "uninsane";
+          };
+          dynamicChannels = {
+            enabled = true;
+            aliasTemplate = "#irc_rizon_$CHANNEL";
+          };
+          ircClients = {
+            nickTemplate = "$LOCALPARTsane";
+            # by default, Matrix will convert messages greater than (3) lines into a pastebin-like URL to send to IRC.
+            lineLimit = 20;
+          };
+          matrixClients = {
+            userTemplate = "@irc_rizon_$NICK";  # the :uninsane.org part is appended automatically
+          };
+
+          # this will let this user message the appservice with `!join #<IRCChannel>` and the rest "Just Works"
+          "@colin:uninsane.org" = "admin";
+
+          membershipLists = {
+            enabled = true;
+            global = {
+              ircToMatrix = {
+                initial = true;
+                incremental = true;
+                requireMatrixJoined = false;
+              };
+              matrixToIrc = {
+                initial = true;
+                incremental = true;
+              };
+            };
+          };
+          # sync room description?
+          bridgeInfoState = {
+            enabled = true;
+            initial = true;
+          };
+
+          # hardcoded mappings, for when dynamicChannels fails us. TODO: probably safe to remove these.
+          # mappings = {
+          #   "#chat" = {
+          #     roomIds = [ "!GXJSOTdbtxRboGtDep:uninsane.org" ];
+          #   };
+          #   # BakaBT requires account registration, which i think means my user needs to be added before the appservice user
+          #   "#BakaBT" = {
+          #     roomIds = [ "!feZKttuYuHilqPFSkD:uninsane.org" ];
+          #   };
+          # };
+          # for per-user IRC password:
+          #   invite @irc_rizon_NickServ:uninsane.org to a DM and type `help`  => register
+          #   invite the matrix-appservice-irc user to a DM and type `!help`   => add PW to database
+          # passwordEncryptionKeyPath = "/path/to/privkey";  # appservice will generate its own if unspecified
+        };
+      };
+    };
+  };
+}

machines/uninsane/services/nginx.nix

@@ -0,0 +1,237 @@
+# docs: https://nixos.wiki/wiki/Nginx
+{ config, pkgs, ... }:
+
+{
+  services.nginx.enable = true;
+
+  # web blog/personal site
+  services.nginx.virtualHosts."uninsane.org" = {
+    root = "/opt/uninsane/root";
+    addSSL = true;
+    enableACME = true;
+
+    # allow matrix users to discover that @user:uninsane.org is reachable via matrix.uninsane.org
+    locations."= /.well-known/matrix/server".extraConfig =
+      let
+        # use 443 instead of the default 8448 port to unite
+        # the client-server and server-server port for simplicity
+        server = { "m.server" = "matrix.uninsane.org:443"; };
+      in ''
+        add_header Content-Type application/json;
+        return 200 '${builtins.toJSON server}';
+      '';
+    locations."= /.well-known/matrix/client".extraConfig =
+      let
+        client = {
+          "m.homeserver" =  { "base_url" = "https://matrix.uninsane.org"; };
+          "m.identity_server" =  { "base_url" = "https://vector.im"; };
+        };
+      # ACAO required to allow element-web on any URL to request this json file
+      in ''
+        add_header Content-Type application/json;
+        add_header Access-Control-Allow-Origin *;
+        return 200 '${builtins.toJSON client}';
+      '';
+
+    # static URLs might not be aware of .well-known (e.g. registration confirmation URLs),
+    # so hack around that.
+    locations."/_matrix" = {
+      proxyPass = "http://127.0.0.1:8008";
+    };
+    locations."/_synapse" = {
+      proxyPass = "http://127.0.0.1:8008";
+    };
+
+    # allow ActivityPub clients to discover how to reach @user@uninsane.org
+    # TODO: waiting on https://git.pleroma.social/pleroma/pleroma/-/merge_requests/3361/
+    # locations."/.well-known/nodeinfo" = {
+    #   proxyPass = "http://127.0.0.1:4000";
+    #   extraConfig = pleromaExtraConfig;
+    # };
+  };
+
+  # Pleroma server and web interface
+  services.nginx.virtualHosts."fed.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+    locations."/" = {
+      proxyPass = "http://127.0.0.1:4000";
+      # documented: https://git.pleroma.social/pleroma/pleroma/-/blob/develop/installation/pleroma.nginx
+      extraConfig = ''
+        # XXX colin: this block is in the nixos examples: i don't understand all of it
+        add_header 'Access-Control-Allow-Origin' '*' always;
+        add_header 'Access-Control-Allow-Methods' 'POST, PUT, DELETE, GET, PATCH, OPTIONS' always;
+        add_header 'Access-Control-Allow-Headers' 'Authorization, Content-Type, Idempotency-Key' always;
+        add_header 'Access-Control-Expose-Headers' 'Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id' always;
+        if ($request_method = OPTIONS) {
+            return 204;
+        }
+
+        add_header X-XSS-Protection "1; mode=block";
+        add_header X-Permitted-Cross-Domain-Policies none;
+        add_header X-Frame-Options DENY;
+        add_header X-Content-Type-Options nosniff;
+        add_header Referrer-Policy same-origin;
+        add_header X-Download-Options noopen;
+
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection "upgrade";
+        # proxy_set_header Host $http_host;
+        proxy_set_header Host $host;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+
+        # colin: added this due to Pleroma complaining in its logs
+        # proxy_set_header X-Real-IP $remote_addr;
+        # proxy_set_header X-Forwarded-Proto $scheme;
+
+        client_max_body_size 16m;
+      '';
+    };
+  };
+
+  # transmission web client
+  services.nginx.virtualHosts."bt.uninsane.org" = {
+    # basicAuth is literally cleartext user/pw, so FORCE this to happen over SSL
+    forceSSL = true;
+    enableACME = true;
+    locations."/" = {
+      # proxyPass = "http://ovpns.uninsane.org:9091";
+      proxyPass = "http://10.0.1.6:9091";
+    };
+  };
+
+  # jackett torrent search
+  services.nginx.virtualHosts."jackett.uninsane.org" = {
+    forceSSL = true;
+    enableACME = true;
+    locations."/" = {
+      # proxyPass = "http://ovpns.uninsane.org:9117";
+      proxyPass = "http://10.0.1.6:9117";
+    };
+  };
+
+  # matrix chat server
+  services.nginx.virtualHosts."matrix.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+
+    # TODO colin: replace this with something helpful to the viewer
+    # locations."/".extraConfig = ''
+    #   return 404;
+    # '';
+
+    locations."/" = {
+      proxyPass = "http://127.0.0.1:8008";
+    };
+    # redirect browsers to the web client.
+    # i don't think native matrix clients ever fetch the root.
+    # ideally this would be put behind some user-agent test though.
+    locations."= /" = {
+      return = "301 https://web.matrix.uninsane.org";
+    };
+
+    # locations."/_matrix" = {
+    #   proxyPass = "http://127.0.0.1:8008";
+    # };
+  };
+
+  # matrix web client
+  # docs: https://nixos.org/manual/nixos/stable/index.html#module-services-matrix-element-web
+  services.nginx.virtualHosts."web.matrix.uninsane.org" = {
+    forceSSL = true;
+    enableACME = true;
+
+    root = pkgs.element-web.override {
+      conf = {
+        default_server_config."m.homeserver" = {
+          "base_url" = "https://matrix.uninsane.org";
+          "server_name" = "uninsane.org";
+        };
+      };
+    };
+  };
+
+  # hosted git (web view and for `git <cmd>` use
+  services.nginx.virtualHosts."git.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+
+    locations."/" = {
+      proxyPass = "http://127.0.0.1:3000";
+    };
+  };
+
+  # Jellyfin multimedia server
+  # this is mostly taken from the official jellfin.org docs
+  services.nginx.virtualHosts."jelly.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+
+    locations."/" = {
+      proxyPass = "http://127.0.0.1:8096";
+      extraConfig = ''
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto $scheme;
+        proxy_set_header X-Forwarded-Protocol $scheme;
+        proxy_set_header X-Forwarded-Host $http_host;
+
+        # Disable buffering when the nginx proxy gets very resource heavy upon streaming
+        proxy_buffering off;
+      '';
+    };
+    # locations."/web/" = {
+    #   proxyPass = "http://127.0.0.1:8096/web/index.html";
+    #   extraConfig = ''
+    #     proxy_set_header Host $host;
+    #     proxy_set_header X-Real-IP $remote_addr;
+    #     proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    #     proxy_set_header X-Forwarded-Proto $scheme;
+    #     proxy_set_header X-Forwarded-Protocol $scheme;
+    #     proxy_set_header X-Forwarded-Host $http_host;
+    #   '';
+    # };
+    locations."/socket" = {
+      proxyPass = "http://127.0.0.1:8096";
+      extraConfig = ''
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection "upgrade";
+
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto $scheme;
+        proxy_set_header X-Forwarded-Protocol $scheme;
+        proxy_set_header X-Forwarded-Host $http_host;
+      '';
+    };
+  };
+
+  # exists only to manage certs for dovecot
+  services.nginx.virtualHosts."imap.uninsane.org" = {
+    forceSSL = true;
+    enableACME = true;
+  };
+  # exists only to manage certs for Postfix
+  services.nginx.virtualHosts."mx.uninsane.org" = {
+    forceSSL = true;
+    enableACME = true;
+  };
+  services.nginx.virtualHosts."nixcache.uninsane.org" = {
+    addSSL = true;
+    enableACME = true;
+    # serverAliases = [ "nixcache" ];
+    locations."/".extraConfig = ''
+      proxy_pass http://localhost:${toString config.services.nix-serve.port};
+      proxy_set_header Host $host;
+      proxy_set_header X-Real-IP $remote_addr;
+      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    '';
+  };
+
+  security.acme.acceptTerms = true;
+  security.acme.defaults.email = "admin.acme@uninsane.org";
+}

machines/uninsane/services/nix-serve.nix

@@ -0,0 +1,12 @@
+# docs: https://nixos.wiki/wiki/Binary_Cache
+# to copy something to this machine's nix cache, do:
+#   nix copy --to ssh://nixcache.uninsane.org PACKAGE
+{ secrets, ... }:
+
+{
+  services.nix-serve = {
+    enable = true;
+    secretKeyFile = builtins.toFile "nix-serve-priv-key.pem" secrets.nix-serve.cache-priv-key;
+    #  "/var/cache-priv-key.pem";
+  };
+}

machines/uninsane/services/pleroma.nix

@@ -1,27 +1,22 @@
-# docs:
+# docs: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/networking/pleroma.nix
-# - https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/networking/pleroma.nix
-# - https://docs.pleroma.social/backend/configuration/cheatsheet/
 #
 # to run it in a oci-container: https://github.com/barrucadu/nixfiles/blob/master/services/pleroma.nix
-{ config, pkgs, ... }:
+{ config, pkgs, lib, secrets, ... }:
 
 {
-  sane.persist.sys.plaintext = [
-    # TODO: mode? could be more granular
-    { user = "pleroma"; group = "pleroma"; directory = "/var/lib/pleroma"; }
-  ];
   services.pleroma.enable = true;
-  services.pleroma.secretConfigFile = config.sops.secrets.pleroma_secrets.path;
+  # TODO: we should write a config file somewhere outside the store... somehow.
+  services.pleroma.secretConfigFile = "/dev/null";
   services.pleroma.configs = [
     ''
     import Config
-
+    
     config :pleroma, Pleroma.Web.Endpoint,
       url: [host: "fed.uninsane.org", scheme: "https", port: 443],
-      http: [ip: {127, 0, 0, 1}, port: 4000]
+      http: [ip: {127, 0, 0, 1}, port: 4000],
-    #   secret_key_base: "{secrets.pleroma.secret_key_base}",
+      secret_key_base: "${secrets.pleroma.secret_key_base}",
-    #   signing_salt: "{secrets.pleroma.signing_salt}"
+      signing_salt: "${secrets.pleroma.signing_salt}"
-
+    
     config :pleroma, :instance,
       name: "Perfectly Sane",
       description: "Single-user Pleroma instance",
@@ -47,40 +42,36 @@
       enabled: false,
       redirect_on_failure: true
       #base_url: "https://cache.pleroma.social"
-
+    
-    # see for reference:
-    # - `force_custom_plan`: <https://docs.pleroma.social/backend/configuration/postgresql/#disable-generic-query-plans>
     config :pleroma, Pleroma.Repo,
       adapter: Ecto.Adapters.Postgres,
       username: "pleroma",
+      password: "${secrets.pleroma.db_password}",
       database: "pleroma",
       hostname: "localhost",
       pool_size: 10,
+      prepare: :named,
       parameters: [
           plan_cache_mode: "force_custom_plan"
       ]
-    # XXX: prepare: :named is needed only for PG <= 12
-    #   prepare: :named,
-    #   password: "{secrets.pleroma.db_password}",
 
     # Configure web push notifications
     config :web_push_encryption, :vapid_details,
-      subject: "mailto:notify.pleroma@uninsane.org"
+      subject: "mailto:notify.pleroma@uninsane.org",
-    #   public_key: "{secrets.pleroma.vapid_public_key}",
+      public_key: "${secrets.pleroma.vapid_public_key}",
-    #   private_key: "{secrets.pleroma.vapid_private_key}"
+      private_key: "${secrets.pleroma.vapid_private_key}"
-
-    # config :joken, default_signer: "{secrets.pleroma.joken_default_signer}"
 
+    config :joken, default_signer: "${secrets.pleroma.joken_default_signer}"
+    
     config :pleroma, :database, rum_enabled: false
     config :pleroma, :instance, static_dir: "/var/lib/pleroma/instance/static"
     config :pleroma, Pleroma.Uploaders.Local, uploads: "/var/lib/pleroma/uploads"
     config :pleroma, configurable_from_database: false
 
     # strip metadata from uploaded images
-    config :pleroma, Pleroma.Upload, filters: [Pleroma.Upload.Filter.Exiftool.StripLocation]
+    config :pleroma, Pleroma.Upload, filters: [Pleroma.Upload.Filter.Exiftool]
 
     # TODO: GET /api/pleroma/captcha is broken
-    # there was a nixpkgs PR to fix this around 2022/10 though.
     config :pleroma, Pleroma.Captcha,
       enabled: false,
       method: Pleroma.Captcha.Native
@@ -90,11 +81,11 @@
     # Enable Strict-Transport-Security once SSL is working:
     config :pleroma, :http_security,
       sts: true
-
+    
     # docs: https://docs.pleroma.social/backend/configuration/cheatsheet/#logger
     config :logger,
       backends: [{ExSyslogger, :ex_syslogger}]
-
+    
     config :logger, :ex_syslogger,
       level: :warn
     #  level: :debug
@@ -113,9 +104,9 @@
 
   systemd.services.pleroma.path = [ 
     # something inside pleroma invokes `sh` w/o specifying it by path, so this is needed to allow pleroma to start
-    pkgs.bash
+    pkgs.bash 
     # used by Pleroma to strip geo tags from uploads
-    pkgs.exiftool
+    pkgs.exiftool 
     # i saw some errors when pleroma was shutting down about it not being able to find `awk`. probably not critical
     pkgs.gawk
     # needed for email operations like password reset
@@ -125,7 +116,6 @@
   systemd.services.pleroma.serviceConfig = {
     # postgres can be slow to service early requests, preventing pleroma from starting on the first try
     Restart = "on-failure";
-    RestartSec = "10s";
   };
 
   # systemd.services.pleroma.serviceConfig = {
@@ -134,53 +124,4 @@
   #   PrivateTmp = lib.mkForce false;
   #   CapabilityBoundingSet = lib.mkForce "~";
   # };
-
-  # Pleroma server and web interface
-  # TODO: enable publog?
-  services.nginx.virtualHosts."fed.uninsane.org" = {
-    forceSSL = true;  # pleroma redirects to https anyway
-    enableACME = true;
-    # inherit kTLS;
-    locations."/" = {
-      proxyPass = "http://127.0.0.1:4000";
-      # documented: https://git.pleroma.social/pleroma/pleroma/-/blob/develop/installation/pleroma.nginx
-      extraConfig = ''
-        # XXX colin: this block is in the nixos examples: i don't understand all of it
-        add_header 'Access-Control-Allow-Origin' '*' always;
-        add_header 'Access-Control-Allow-Methods' 'POST, PUT, DELETE, GET, PATCH, OPTIONS' always;
-        add_header 'Access-Control-Allow-Headers' 'Authorization, Content-Type, Idempotency-Key' always;
-        add_header 'Access-Control-Expose-Headers' 'Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id' always;
-        if ($request_method = OPTIONS) {
-            return 204;
-        }
-
-        add_header X-XSS-Protection "1; mode=block";
-        add_header X-Permitted-Cross-Domain-Policies none;
-        add_header X-Frame-Options DENY;
-        add_header X-Content-Type-Options nosniff;
-        add_header Referrer-Policy same-origin;
-        add_header X-Download-Options noopen;
-
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection "upgrade";
-        # proxy_set_header Host $http_host;
-        proxy_set_header Host $host;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-
-        # colin: added this due to Pleroma complaining in its logs
-        # proxy_set_header X-Real-IP $remote_addr;
-        # proxy_set_header X-Forwarded-Proto $scheme;
-
-        client_max_body_size 16m;
-      '';
-    };
-  };
-
-  sane.services.trust-dns.zones."uninsane.org".inet.CNAME."fed" = "native";
-
-  sops.secrets.pleroma_secrets = {
-    sopsFile = ../../../secrets/servo.yaml;
-    owner = config.users.users.pleroma.name;
-  };
 }

machines/uninsane/services/postfix.nix

@@ -1,4 +1,4 @@
-{ config, lib, ... }:
+{ config, pkgs, lib, secrets, ... }:
 
 let
   submissionOptions = {
@@ -16,70 +16,6 @@ let
   };
 in
 {
-  sane.persist.sys.plaintext = [
-    # TODO: mode? could be more granular
-    { user = "opendkim"; group = "opendkim"; directory = "/var/lib/opendkim"; }
-    { user = "root"; group = "root"; directory = "/var/lib/postfix"; }
-    { user = "root"; group = "root"; directory = "/var/spool/mail"; }
-    # *probably* don't need these dirs:
-    # "/var/lib/dhparams"          # https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/security/dhparams.nix
-    # "/var/lib/dovecot"
-  ];
-
-  networking.firewall.allowedTCPPorts = [
-    25   # SMTP
-    143  # IMAP
-    465  # SMTPS
-    587  # SMTPS/submission
-    993  # IMAPS
-  ];
-
-  # exists only to manage certs for dovecot
-  services.nginx.virtualHosts."imap.uninsane.org" = {
-    enableACME = true;
-  };
-  # exists only to manage certs for Postfix
-  services.nginx.virtualHosts."mx.uninsane.org" = {
-    enableACME = true;
-  };
-
-
-  sane.services.trust-dns.zones."uninsane.org".inet = {
-    MX."@" = "10 mx.uninsane.org.";
-    # XXX: RFC's specify that the MX record CANNOT BE A CNAME
-    A."mx" = "185.157.162.178";
-    CNAME."imap" = "native";
-
-    # Sender Policy Framework:
-    #   +mx     => mail passes if it originated from the MX
-    #   +a      => mail passes if it originated from the A address of this domain
-    #   +ip4:.. => mail passes if it originated from this IP
-    #   -all    => mail fails if none of these conditions were met
-    TXT."@" = "v=spf1 a mx -all";
-
-    # DKIM public key:
-    TXT."mx._domainkey" =
-      "v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCkSyMufc2KrRx3j17e/LyB+3eYSBRuEFT8PUka8EDX04QzCwDPdkwgnj3GNDvnB5Ktb05Cf2SJ/S1OLqNsINxJRWtkVfZd/C339KNh9wrukMKRKNELL9HLUw0bczOI4gKKFqyrRE9qm+4csCMAR79Te9FCjGV/jVnrkLdPT0GtFwIDAQAB"
-    ;
-
-    # DMARC fields <https://datatracker.ietf.org/doc/html/rfc7489>:
-    #   p=none|quarantine|reject: what to do with failures
-    #   sp = p but for subdomains
-    #   rua = where to send aggregrate reports
-    #   ruf = where to send individual failure reports
-    #   fo=0|1|d|s  controls WHEN to send failure reports
-    #     (1=on bad alignment; d=on DKIM failure; s=on SPF failure);
-    # Additionally:
-    #   adkim=r|s  (is DKIM relaxed [default] or strict)
-    #   aspf=r|s   (is SPF relaxed [default] or strict)
-    #   pct = sampling ratio for punishing failures (default 100 for 100%)
-    #   rf = report format
-    #   ri = report interval
-    TXT."_dmarc" =
-      "v=DMARC1;p=quarantine;sp=reject;rua=mailto:admin+mail@uninsane.org;ruf=mailto:admin+mail@uninsane.org;fo=1:d:s"
-    ;
-  };
-
   services.postfix.enable = true;
   services.postfix.hostname = "mx.uninsane.org";
   services.postfix.origin = "uninsane.org";
@@ -110,8 +46,7 @@ in
   services.postfix.enableSubmissions = true;
   services.postfix.submissionsOptions = submissionOptions;
 
-  systemd.services.postfix.after = [ "wireguard-wg0.service" ];
+  systemd.services.postfix.after = [ "wg0veth.service" ];
-  systemd.services.postfix.partOf = [ "wireguard-wg0.service" ];
   systemd.services.postfix.serviceConfig = {
     # run this behind the OVPN static VPN
     NetworkNamespacePath = "/run/netns/ovpns";
@@ -132,8 +67,7 @@ in
   # keeping this the same as the hostname seems simplest
   services.opendkim.selector = "mx";
 
-  systemd.services.opendkim.after = [ "wireguard-wg0.service" ];
+  systemd.services.opendkim.after = [ "wg0veth.service" ];
-  systemd.services.opendkim.partOf = [ "wireguard-wg0.service" ];
   systemd.services.opendkim.serviceConfig = {
     # run this behind the OVPN static VPN
     NetworkNamespacePath = "/run/netns/ovpns";
@@ -148,7 +82,10 @@ in
   services.dovecot2.enablePAM = false;
   services.dovecot2.extraConfig =
   let
-    passwdFile = config.sops.secrets.dovecot_passwd.path;
+    passwdFile = builtins.toFile "dovecot-passwd-file" ''
+      colin:${secrets.dovecot.hashedPasswd.colin}:1000:1000::/var/mail/colin/run/current-system/sw/bin/nologin:
+      matrix-synapse:${secrets.dovecot.hashedPasswd.matrix-synapse}:224:224::/var/mail/colin:/run/current-system/sw/bin/nologin:
+      '';
   in
     ''
     passdb {
@@ -196,11 +133,4 @@ in
     #   pattern = "/^Subject:.*activate your account/";
     # }
   ];
-
-  sops.secrets.dovecot_passwd = {
-    sopsFile = ../../../secrets/servo.yaml;
-    owner = config.users.users.dovecot2.name;
-    # TODO: debug why mail can't be sent without this being world-readable
-    mode = "0444";
-  };
 }

machines/uninsane/services/postgres.nix

@@ -1,12 +1,8 @@
-{ ... }:
+{ config, pkgs, lib, ... }:
 
 {
-  sane.persist.sys.plaintext = [
-    # TODO: mode?
-    { user = "postgres"; group = "postgres"; directory = "/var/lib/postgresql"; }
-  ];
   services.postgresql.enable = true;
-  # services.postgresql.dataDir = "/opt/postgresql/13";
+  services.postgresql.dataDir = "/opt/postgresql/13";
   # XXX colin: for a proper deploy, we'd want to include something for Pleroma here too.
   # services.postgresql.initialScript = pkgs.writeText "synapse-init.sql" ''
   #   CREATE ROLE "matrix-synapse" WITH LOGIN PASSWORD '<password goes here>';
@@ -17,11 +13,6 @@
   #     LC_CTYPE = "C";
   # '';
 
-  # TODO: perf tuning
-  # - for recommended values see: <https://pgtune.leopard.in.ua/>
-  # - for official docs (sparse), see: <https://www.postgresql.org/docs/11/config-setting.html#CONFIG-SETTING-CONFIGURATION-FILE>
-  # services.postgresql.settings = { ... }
-
   # daily backups to /var/backup
   services.postgresqlBackup.enable = true;
 

machines/uninsane/services/transmission.nix

@@ -0,0 +1,37 @@
+{ config, pkgs, lib, ... }:
+
+{
+  services.transmission.enable = true;
+  services.transmission.settings = {
+    rpc-bind-address = "0.0.0.0";
+    #rpc-host-whitelist = "bt.uninsane.org";
+    #rpc-whitelist = "*.*.*.*";
+    rpc-authentication-required = true;
+    rpc-username = "colin";
+    # salted pw. to regenerate, set this plaintext, run nixos-rebuild, and then find the salted pw in:
+    # /var/lib/transmission/.config/transmission-daemon/settings.json
+    rpc-password = "{503fc8928344f495efb8e1f955111ca5c862ce0656SzQnQ5";
+    rpc-whitelist-enabled = false;
+
+    # download-dir = "/opt/uninsane/media/";
+
+    # force peer connections to be encrypted
+    encryption = 2;
+
+    # units in kBps
+    speed-limit-down = 3000;
+    speed-limit-down-enabled = true;
+    speed-limit-up = 600;
+    speed-limit-up-enabled = true;
+
+  };
+  # transmission will by default not allow the world to read its files.
+  services.transmission.downloadDirPermissions = "775";
+
+  systemd.services.transmission.after = ["wg0veth.service"];
+  systemd.services.transmission.serviceConfig = {
+    # run this behind the OVPN static VPN
+    NetworkNamespacePath = "/run/netns/ovpns";
+  };
+}
+

machines/uninsane/users.nix

@@ -1,4 +1,4 @@
-{ config, ... }:
+{ config, pkgs, lib, ... }:
 
 # installer docs: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/profiles/installation-device.nix
 {

modules/data/default.nix

@@ -1,12 +0,0 @@
-# this directory contains data of a factual nature.
-# for example, public ssh keys, GPG keys, DNS-type name mappings.
-#
-# don't put things like fully-specific ~/.config files in here,
-# even if they're "relatively unopinionated".
-
-moduleArgs:
-
-{
-  feeds = import ./feeds moduleArgs;
-  keys = import ./keys.nix;
-}

modules/data/feeds/default.nix

@@ -1,51 +0,0 @@
-{ lib, ... }:
-
-let
-  inherit (builtins) concatLists concatStringsSep foldl' fromJSON map readDir readFile;
-  inherit (lib) hasSuffix listToAttrs mapAttrsToList removeSuffix splitString;
-
-  # given a path to a .json file relative to sources, construct the best feed object we can.
-  # the .json file could be empty, in which case we make assumptions about the feed based
-  # on its fs path.
-  # Type: feedFromSourcePath :: String -> { name = String; value = feed; }
-  feedFromSourcePath = json-path:
-    assert hasSuffix "/default.json" json-path;
-    let
-      canonical-name = removeSuffix "/default.json" json-path;
-      default-url = "https://${canonical-name}";
-      feed-details = { url = default-url; } // (tryImportJson (./sources/${json-path}));
-    in { name = canonical-name; value = mkFeed feed-details; };
-
-  # TODO: for now, feeds are just ordinary Attrs.
-  # in the future, we'd like to set them up with an update script.
-  mkFeed = { url, ... }@details: details;
-
-  # return an AttrSet representing the json at the provided path,
-  # or {} if the path is empty.
-  tryImportJson = path:
-    let
-      as-str = readFile path;
-    in
-      if as-str == "" then
-        {}
-      else
-        fromJSON as-str;
-
-  sources = enumerateFilePaths ./sources;
-
-  # like `lib.listFilesRecursive` but does not mangle paths.
-  # Type: enumerateFilePaths :: path -> [String]
-  enumerateFilePaths = base:
-    concatLists (
-      mapAttrsToList
-        (name: type:
-          if type == "directory" then
-            # enumerate this directory and then prefix each result with the directory's name
-            map (e: "${name}/${e}") (enumerateFilePaths (base + "/${name}"))
-          else
-            [ name ]
-        )
-        (readDir base)
-    );
-in
-  listToAttrs (map feedFromSourcePath sources)

modules/data/feeds/sources/acquired.libsyn.com/default.json

@@ -1,21 +0,0 @@
-{
-  "bozo": 0,
-  "content_length": 1369733,
-  "content_type": "application/rss+xml; charset=utf-8",
-  "description": "Every company has a story. Learn the playbooks that built the world’s greatest companies — and how you can apply them as a founder, operator, or investor.",
-  "favicon": null,
-  "hubs": [],
-  "is_podcast": true,
-  "is_push": false,
-  "item_count": 173,
-  "last_seen": "2023-01-11T15:26:37.515527+00:00",
-  "last_updated": "2022-12-19T07:22:28+00:00",
-  "score": 18,
-  "self_url": "https://acquired.libsyn.com/rss",
-  "site_name": null,
-  "site_url": null,
-  "title": "Acquired",
-  "url": "https://acquired.libsyn.com/rss",
-  "velocity": 0.066,
-  "version": "rss20"
-}

modules/data/feeds/sources/allinchamathjason.libsyn.com/default.json

@@ -1,21 +0,0 @@
-{
-  "bozo": 0,
-  "content_length": 1030773,
-  "content_type": "application/rss+xml; charset=utf-8",
-  "description": "Industry veterans, degenerate gamblers & besties Chamath Palihapitiya, Jason Calacanis, David Sacks & David Friedberg cover all things economic, tech, political, social & poker.",
-  "favicon": null,
-  "hubs": [],
-  "is_podcast": true,
-  "is_push": false,
-  "item_count": 124,
-  "last_seen": "2023-01-11T12:44:53.606606+00:00",
-  "last_updated": "2023-01-06T10:51:00+00:00",
-  "score": 18,
-  "self_url": "https://allinchamathjason.libsyn.com/rss",
-  "site_name": "All-In with Chamath, Jason, Sacks & Friedberg",
-  "site_url": "https://allinchamathjason.libsyn.com",
-  "title": "All-In with Chamath, Jason, Sacks & Friedberg",
-  "url": "https://allinchamathjason.libsyn.com/rss",
-  "velocity": 0.12,
-  "version": "rss20"
-}