nixpkgs/nixos/modules/system/boot/luksroot.nix

434 lines
14 KiB
Nix
Raw Normal View History

2013-07-23 16:56:12 +00:00
{ config, pkgs, ... }:
with pkgs.lib;
let
luks = config.boot.initrd.luks;
openCommand = { name, device, keyFile, keyFileSize, allowDiscards, yubikey, ... }: ''
# Wait for luksRoot to appear, e.g. if on a usb drive.
# XXX: copied and adapted from stage-1-init.sh - should be
# available as a function.
if ! test -e ${device}; then
echo -n "waiting 10 seconds for device ${device} to appear..."
for try in $(seq 10); do
sleep 1
if test -e ${device}; then break; fi
echo -n .
done
echo "ok"
fi
${optionalString (keyFile != null) ''
if ! test -e ${keyFile}; then
echo -n "waiting 10 seconds for key file ${keyFile} to appear..."
for try in $(seq 10); do
sleep 1
if test -e ${keyFile}; then break; fi
echo -n .
done
echo "ok"
fi
''}
open_normally() {
cryptsetup luksOpen ${device} ${name} ${optionalString allowDiscards "--allow-discards"} \
${optionalString (keyFile != null) "--key-file=${keyFile} ${optionalString (keyFileSize != null) "--keyfile-size=${toString keyFileSize}"}"}
}
${optionalString (luks.yubikeySupport && (yubikey != null)) ''
rbtohex() {
od -An -vtx1 | tr -d ' \n'
}
hextorb() {
tr '[:lower:]' '[:upper:]' | sed -e 's|\([0-9A-F]\{2\}\)|\\\\\\x\1|gI' | xargs printf
}
take() {
local c="$1"
shift
head -c $c "$@"
}
drop() {
local c="$1"
shift
if [ -e "$1" ]; then
cat "$1" | ( dd of=/dev/null bs="$c" count=1 2>/dev/null ; dd 2>/dev/null )
else
( dd of=/dev/null bs="$c" count=1 2>/dev/null ; dd 2>/dev/null )
fi
}
open_yubikey() {
mkdir -p ${yubikey.storage.mountPoint}
mount -t ${yubikey.storage.fsType} ${toString yubikey.storage.device} ${yubikey.storage.mountPoint}
local uuid_r
uuid_r="$(take 32 ${yubikey.storage.mountPoint}${yubikey.storage.path})"
local uuid_luks
uuid_luks="$(cryptsetup luksUUID ${device} | take 36 | tr -d '-')"
local k_user
local challenge
local k_blob
local aes_blob_decrypted
local checksum_correct
local checksum
for try in $(seq 3); do
${optionalString yubikey.twoFactor ''
echo -n "Enter two-factor passphrase: "
read -s k_user
''}
challenge="$(echo -n $k_user$uuid_r$uuid_luks | openssl-wrap dgst -binary -sha1 | rbtohex)"
k_blob="$(ykchalresp -${toString yubikey.slot} -x $challenge 2>/dev/null)"
aes_blob_decrypted="$(drop 32 ${yubikey.storage.mountPoint}${yubikey.storage.path} | hextorb | openssl-wrap enc -d -aes-256-ctr -K $k_blob -iv $uuid_r | rbtohex)"
checksum="$(echo -n $aes_blob_decrypted | drop 168)"
if [ "$(echo -n $aes_blob_decrypted | hextorb | take 84 | openssl-wrap dgst -binary -sha512 | rbtohex)" == "$checksum" ]; then
checksum_correct=1
break
else
checksum_correct=0
echo "Authentication failed!"
fi
done
if [ "$checksum_correct" != "1" ]; then
umount ${yubikey.storage.mountPoint}
echo "Maximum authentication errors reached"
exit 1
fi
local k_yubi
k_yubi="$(echo -n $aes_blob_decrypted | take 40)"
local k_luks
k_luks="$(echo -n $aes_blob_decrypted | drop 40 | take 128)"
echo -n "$k_luks" | hextorb | cryptsetup luksOpen ${device} ${name} ${optionalString allowDiscards "--allow-discards"} --key-file=-
update_failed=false
local new_uuid_r
new_uuid_r="$(uuidgen)"
if [ $? != "0" ]; then
for try in $(seq 10); do
sleep 1
new_uuid_r="$(uuidgen)"
if [ $? == "0" ]; then break; fi
if [ $try -eq 10 ]; then update_failed=true; fi
done
fi
if [ "$update_failed" == false ]; then
new_uuid_r="$(echo -n $new_uuid_r | take 36 | tr -d '-')"
local new_challenge
new_challenge="$(echo -n $k_user$new_uuid_r$uuid_luks | openssl-wrap dgst -binary -sha1 | rbtohex)"
local new_k_blob
new_k_blob="$(echo -n $new_challenge | hextorb | openssl-wrap dgst -binary -sha1 -mac HMAC -macopt hexkey:$k_yubi | rbtohex)"
echo -n "$new_uuid_r" > ${yubikey.storage.mountPoint}${yubikey.storage.path}
echo -n "$k_yubi$k_luks$checksum" | hextorb | openssl-wrap enc -e -aes-256-ctr -K "$new_k_blob" -iv "$new_uuid_r" | rbtohex >> ${yubikey.storage.mountPoint}${yubikey.storage.path}
else
echo "Warning: Could not obtain new UUID, current challenge persists!"
fi
umount ${yubikey.storage.mountPoint}
}
2014-01-28 19:39:25 +00:00
yubikey_missing=true
ykinfo -v 1>/dev/null 2>&1
if [ $? != "0" ]; then
echo -n "waiting 10 seconds for yubikey to appear..."
for try in $(seq 10); do
sleep 1
2014-01-28 19:39:25 +00:00
ykinfo -v 1>/dev/null 2>&1
if [ $? == "0" ]; then
yubikey_missing=false
break
fi
echo -n .
done
echo "ok"
2014-01-28 19:39:25 +00:00
else
yubikey_missing=false
fi
2014-01-28 19:39:25 +00:00
if [ "$yubikey_missing" == true ]; then
echo "no yubikey found, falling back to non-yubikey open procedure"
open_normally
else
open_yubikey
fi
''}
# open luksRoot and scan for logical volumes
${optionalString ((!luks.yubikeySupport) || (yubikey == null)) ''
open_normally
''}
'';
isPreLVM = f: f.preLVM;
preLVM = filter isPreLVM luks.devices;
postLVM = filter (f: !(isPreLVM f)) luks.devices;
in
{
options = {
boot.initrd.luks.mitigateDMAAttacks = mkOption {
type = types.bool;
default = true;
description = ''
2013-07-23 16:56:12 +00:00
Unless enabled, encryption keys can be easily recovered by an attacker with physical
access to any machine with PCMCIA, ExpressCard, ThunderBolt or FireWire port.
More information: http://en.wikipedia.org/wiki/DMA_attack
2013-07-23 16:56:12 +00:00
This option blacklists FireWire drivers, but doesn't remove them. You can manually
load the drivers if you need to use a FireWire device, but don't forget to unload them!
'';
};
boot.initrd.luks.cryptoModules = mkOption {
type = types.listOf types.string;
2013-07-23 16:56:12 +00:00
default =
[ "aes" "aes_generic" "blowfish" "twofish"
"serpent" "cbc" "xts" "lrw" "sha1" "sha256" "sha512"
(if pkgs.stdenv.system == "x86_64-linux" then "aes_x86_64" else "aes_i586")
2013-07-23 16:56:12 +00:00
];
description = ''
2013-07-23 16:56:12 +00:00
A list of cryptographic kernel modules needed to decrypt the root device(s).
The default includes all common modules.
'';
};
boot.initrd.luks.devices = mkOption {
default = [ ];
example = [ { name = "luksroot"; device = "/dev/sda3"; preLVM = true; } ];
description = ''
The list of devices that should be decrypted using LUKS before trying to mount the
root partition. This works for both LVM-over-LUKS and LUKS-over-LVM setups.
The devices are decrypted to the device mapper names defined.
Make sure that initrd has the crypto modules needed for decryption.
'';
type = types.listOf types.optionSet;
options = {
name = mkOption {
example = "luksroot";
type = types.string;
description = "Named to be used for the generated device in /dev/mapper.";
};
device = mkOption {
example = "/dev/sda2";
type = types.string;
description = "Path of the underlying block device.";
};
keyFile = mkOption {
default = null;
example = "/dev/sdb1";
type = types.nullOr types.string;
description = ''
The name of the file (can be a raw device or a partition) that
should be used as the decryption key for the encrypted device. If
not specified, you will be prompted for a passphrase instead.
'';
};
keyFileSize = mkOption {
default = null;
example = 4096;
type = types.nullOr types.int;
description = ''
The size of the key file. Use this if only the beginning of the
key file should be used as a key (often the case if a raw device
or partition is used as key file). If not specified, the whole
<literal>keyFile</literal> will be used decryption, instead of just
the first <literal>keyFileSize</literal> bytes.
'';
};
preLVM = mkOption {
default = true;
type = types.bool;
description = "Whether the luksOpen will be attempted before LVM scan or after it.";
};
allowDiscards = mkOption {
default = false;
type = types.bool;
description = ''
Whether to allow TRIM requests to the underlying device. This option
has security implications, please read the LUKS documentation before
activating in.
'';
};
yubikey = mkOption {
default = null;
type = types.nullOr types.optionSet;
description = ''
The options to use for this LUKS device in Yubikey-PBA.
If null (the default), Yubikey-PBA will be disabled for this device.
'';
options = {
twoFactor = mkOption {
default = true;
type = types.bool;
description = "Whether to use a passphrase and a Yubikey (true), or only a Yubikey (false)";
};
slot = mkOption {
default = 2;
type = types.int;
description = "Which slot on the Yubikey to challenge";
};
storage = mkOption {
type = types.optionSet;
description = "Options related to the authentication record";
options = {
device = mkOption {
default = /dev/sda1;
type = types.path;
description = ''
An unencrypted device that will temporarily be mounted in stage-1.
Must contain the authentication record for this LUKS device.
'';
};
fsType = mkOption {
default = "vfat";
type = types.string;
description = "The filesystem of the unencrypted device";
};
mountPoint = mkOption {
default = "/crypt-storage";
type = types.string;
description = "Path where the unencrypted device will be mounted in stage-1";
};
path = mkOption {
default = "/crypt-storage/default";
type = types.string;
description = ''
Absolute path of the authentication record on the unencrypted device with
that device's root directory as "/".
'';
};
};
};
};
};
};
};
boot.initrd.luks.yubikeySupport = mkOption {
default = false;
type = types.bool;
description = ''
Enables support for authenticating with a Yubikey on LUKS devices.
See the NixOS wiki for information on how to properly setup a LUKS device
and a Yubikey to work with this feature.
'';
};
};
config = mkIf (luks.devices != []) {
# actually, sbp2 driver is the one enabling the DMA attack, but this needs to be tested
boot.blacklistedKernelModules = optionals luks.mitigateDMAAttacks
["firewire_ohci" "firewire_core" "firewire_sbp2"];
# Some modules that may be needed for mounting anything ciphered
boot.initrd.availableKernelModules = [ "dm_mod" "dm_crypt" "cryptd" ] ++ luks.cryptoModules;
# copy the cryptsetup binary and it's dependencies
boot.initrd.extraUtilsCommands = ''
cp -pdv ${pkgs.cryptsetup}/sbin/cryptsetup $out/bin
# XXX: do we have a function that does this?
for lib in $(ldd $out/bin/cryptsetup |grep '=>' |grep /nix/store/ |cut -d' ' -f3); do
cp -pdvn $lib $out/lib
cp -pvn $(readlink -f $lib) $out/lib
done
${optionalString luks.yubikeySupport ''
cp -pdv ${pkgs.utillinux}/bin/uuidgen $out/bin
for lib in $(ldd $out/bin/uuidgen |grep '=>' |grep /nix/store/ |cut -d' ' -f3); do
cp -pdvn $lib $out/lib
cp -pvn $(readlink -f $lib) $out/lib
done
cp -pdv ${pkgs.ykpers}/bin/ykchalresp $out/bin
for lib in $(ldd $out/bin/ykchalresp |grep '=>' |grep /nix/store/ |cut -d' ' -f3); do
cp -pdvn $lib $out/lib
cp -pvn $(readlink -f $lib) $out/lib
done
cp -pdv ${pkgs.ykpers}/bin/ykinfo $out/bin
for lib in $(ldd $out/bin/ykinfo |grep '=>' |grep /nix/store/ |cut -d' ' -f3); do
cp -pdvn $lib $out/lib
cp -pvn $(readlink -f $lib) $out/lib
done
cp -pdv ${pkgs.openssl}/bin/openssl $out/bin
for lib in $(ldd $out/bin/openssl |grep '=>' |grep /nix/store/ |cut -d' ' -f3); do
cp -pdvn $lib $out/lib
cp -pvn $(readlink -f $lib) $out/lib
done
mkdir -p $out/etc/ssl
cp -pdv ${pkgs.openssl}/etc/ssl/openssl.cnf $out/etc/ssl
cat > $out/bin/openssl-wrap <<EOF
#!$out/bin/sh
EOF
chmod +x $out/bin/openssl-wrap
''}
'';
boot.initrd.extraUtilsCommandsTest = ''
$out/bin/cryptsetup --version
${optionalString luks.yubikeySupport ''
$out/bin/uuidgen --version
$out/bin/ykchalresp -V
$out/bin/ykinfo -V
cat > $out/bin/openssl-wrap <<EOF
#!$out/bin/sh
export OPENSSL_CONF=$out/etc/ssl/openssl.cnf
$out/bin/openssl "\$@"
EOF
$out/bin/openssl-wrap version
''}
'';
boot.initrd.preLVMCommands = concatMapStrings openCommand preLVM;
boot.initrd.postDeviceCommands = concatMapStrings openCommand postLVM;
environment.systemPackages = [ pkgs.cryptsetup ];
};
}