colin/nixpkgs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b6d85c936f
nixpkgs/nixos/modules/module-list.nix

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1638 lines
55 KiB
Nix
Raw Normal View History

Refactoring: Split fonts.nix into smaller modules
2013-06-27 11:12:45 +00:00
[
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./config/appstream.nix
./config/console.nix
Add option environment.enableDebugInfo This makes the debug outputs of packages that have them available to programs like gdb.
2015-10-30 14:16:48 +00:00
./config/debug-info.nix
nixos/fanout: init fanout oneshot module
2023-07-25 17:45:41 +00:00
./config/fanout.nix
Add option environment.enableDebugInfo This makes the debug outputs of packages that have them available to programs like gdb.
2015-10-30 14:16:48 +00:00
./config/fonts/fontconfig.nix
Refactoring: Split fonts.nix into smaller modules
2013-06-27 11:12:45 +00:00
./config/fonts/fontdir.nix
./config/fonts/ghostscript.nix
nixos/fonts: rename fonts.fonts option to fonts.packages, other cleanups fonts.fonts is not a great name and this also resolves a TODO.
2023-07-19 11:41:53 +00:00
./config/fonts/packages.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./config/gtk/gtk-icon-cache.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./config/i18n.nix
iproute2: module to create rt_table file & co When doing source routing/multihoming, it's practical to give names to routing tables. The absence of the rt_table file in /etc make this impossible. This patch recreates these files on rebuild so that they can be modified by the user see NixOS#38638. iproute2 is modified to look into config.networking.iproute2.confDir instead of /etc/iproute2.
2018-05-11 08:42:37 +00:00
./config/iproute2.nix
* One down, three to go. svn path=/nixos/branches/modular-nixos/; revision=15784
2009-05-29 10:04:04 +00:00
./config/ldap.nix
nixos/ldso: init module
2023-11-27 11:50:25 +00:00
./config/ldso.nix
timezone.nix -> locale.nix Also includes geolocation information abstracted from redshift.nix
2019-07-16 20:21:55 +00:00
./config/locale.nix
nixos/malloc: configure system-wide malloc provider Currently, this uses the somewhat crude method of setting LD_PRELOAD in the system environment. This works, but should be considered a stepping stone to a more robust solution.
2019-04-23 20:16:22 +00:00
./config/malloc.nix
nixos: add mysql/mariadb user authentication
2022-07-29 15:23:44 +00:00
./config/mysql.nix
* Move global networking data (/etc/services, /etc/protocols, /etc/rpc, /etc/hosts) to modules/config/networking.nix. svn path=/nixos/branches/modular-nixos/; revision=15764
2009-05-28 12:43:54 +00:00
./config/networking.nix
nixos/config/nix: Move legacyConfMappings
2023-07-05 10:52:56 +00:00
./config/nix.nix
nixos/config/nix-channel: Factor out root channel initialization
2023-07-05 11:53:25 +00:00
./config/nix-channel.nix
nixos: flakes.nix -> nix-flakes.nix I guess this is what people expect to find. Thanks Sandro.
2023-07-06 21:27:17 +00:00
./config/nix-flakes.nix
nixos/config/nix-remote-build: Factor out
2023-07-05 11:38:30 +00:00
./config/nix-remote-build.nix
Reduce size of iso-minimal-fresh-kernel and make it easier to install offline svn path=/nixos/trunk/; revision=17301
2009-09-20 15:07:19 +00:00
./config/no-x-libs.nix
* Refactoring: moved some options out of system/options.nix (almost empty now), do more of bashrc.sh declaratively, and moved nsswitch generation to modules/config/nsswitch.nix. svn path=/nixos/branches/modular-nixos/; revision=15754
2009-05-27 23:14:38 +00:00
./config/nsswitch.nix
* Move power management configuration into a separate module from the acpid service. * Add a pm-utils hook to allow commands to be executed when the system suspends/resumes etc. svn path=/nixos/branches/upstart-0.6/; revision=18353
2009-11-15 12:48:42 +00:00
./config/power-management.nix
* Add a module to enable PulseAudio. It causes all ALSA applications to be rerouted to PulseAudio. Note that this is distinct from the already existing module ‘services/audio/pulseaudio.nix’ that provides a system-wide PulseAudio daemon, which is usually not what you want. svn path=/nixos/trunk/; revision=27958
2011-07-26 01:51:56 +00:00
./config/pulseaudio.nix
rename config.qt5 -> config.qt
2022-12-24 09:59:15 +00:00
./config/qt.nix
resolvconf service: init This is a refactor of how resolvconf is managed on NixOS. We split it into a separate service which is enabled internally depending on whether we want /etc/resolv.conf to be managed by it. Various services now take advantage of those configuration options. We also now use systemd instead of activation scripts to update resolv.conf. NetworkManager now uses the right option for rc-manager DNS automatically, so the configuration option shouldn't be exposed.
2019-07-15 17:18:49 +00:00
./config/resolvconf.nix
Radically change the way NixOS handles environment variables and make it possible not to use Bash as the default interactive shell. This change does two things: * "NixOSizes" environment variables generation. This allows some more error-checking and opens possibilities for a modular environment configuration. From now on the most of environment variables are generated directly by the nix code. Generating sh code that generates environment variables is left in a few places where nontrivial access to a local environment state is needed. * By doing the first change this patch untangles bash from the environment configuration and makes it trivial to add a support for other non bash-compatible shells. Now to the sad part. This change is quite large (and I'm not sure it's possible to split it) and yet is not quite complete, it needs some changes to nixpkgs to be perfect. See !!! comments in modules/config/shells-environment.nix. Main principle behind this change is "change environment generation and nothing else". In particular, shell configuration principles stay exactly the same as before.
2013-09-18 03:18:34 +00:00
./config/shells-environment.nix
nixos/stevenblack: init
2023-01-05 21:37:23 +00:00
./config/stevenblack.nix
nixos/stub-ld: init module
2023-11-24 03:03:03 +00:00
./config/stub-ld.nix
* Move the swap module to config/ because it doesn't provide a task anymore. Activating swap devices is now handled by the mountall task. svn path=/nixos/branches/boot-order/; revision=22489
2010-07-06 09:01:15 +00:00
./config/swap.nix
Add a module for setting sysctl parameters This adds an option ‘boot.kernel.sysctl’ and generates a file /etc/sysctl/nixos.conf read by systemd-sysctl.service.
2013-03-02 18:53:48 +00:00
./config/sysctl.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./config/system-environment.nix
* Refactoring: moved some options out of system/options.nix (almost empty now), do more of bashrc.sh declaratively, and moved nsswitch generation to modules/config/nsswitch.nix. svn path=/nixos/branches/modular-nixos/; revision=15754
2009-05-27 23:14:38 +00:00
./config/system-path.nix
terminfo: symlink terminfo to /etc for ncurses
2017-06-27 08:57:44 +00:00
./config/terminfo.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./config/unix-odbc-drivers.nix
./config/users-groups.nix
nixos/vte: init This module correctly includes the vte.sh script required for vte terminals like gnome-terminal to show the CWD in the window title and preserved across instances. This is achieved with the options: * programs.bash.vteIntegration * programs.zsh.vteIntegration as it's best to keep this configuration unguarded by gnome3.enable to support other vte terminals (such as elementary-terminal). Note the distinction between Zsh and Bash doesn't include a different script, as this script only supports those two shells.
2019-08-21 19:56:25 +00:00
./config/vte.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./config/xdg/autostart.nix
./config/xdg/icons.nix
./config/xdg/menus.nix
./config/xdg/mime.nix
./config/xdg/portal.nix
./config/xdg/portals/lxqt.nix
./config/xdg/portals/wlr.nix
./config/xdg/sounds.nix
nixos: Add zram swap module This allows you to use the Linux kernel's built-in compressed memory as swap space functionality. It is recommended to enable only for kernel 3.14 (which is when zram came out of the staging drivers area) or higher.
2014-04-24 23:56:36 +00:00
./config/zram.nix
acpilight: add to module-list acpilight package and module have been added to nixpkgs, but the module hasn't been added to module-list.nix, so using it results in the following error. ``` The option `hardware.acpilight' defined in `/etc/nixos/configuration.nix' does not exist. ``` Add the module to module-list.nix.
2019-03-19 21:21:36 +00:00
./hardware/acpilight.nix
Move boot loader modules to modules/system/boot/loader
2012-07-25 14:59:03 +00:00
./hardware/all-firmware.nix
nixos/hardware/bladeRF: init at 2.0.2 This allows to easily enable bladerf-related udev rules with nixos configuration.
2018-09-24 19:40:45 +00:00
./hardware/bladeRF.nix
brillo: init at 1.4.8
2019-04-14 09:53:43 +00:00
./hardware/brillo.nix
ckb, ckb module: rename to ckb-next The upstream package has officially changed its name to ckb-next.
2018-05-06 18:26:37 +00:00
./hardware/ckb-next.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/corectrl.nix
Add new 'hardware.cpu.amd.updateMicrocode' option.
2012-09-11 16:44:37 +00:00
./hardware/cpu/amd-microcode.nix
module-list: include AMD SEV module Signed-off-by: Roman Volosatovs <rvolosatovs@riseup.net>
2022-11-30 08:11:50 +00:00
./hardware/cpu/amd-sev.nix
nixos/ryzen-smu: init module Provide a module for installing ryzen_smu, a Linux kernel driver that exposes access to the SMU (System Management Unit) for certain AMD Ryzen Processors. Installs monitor_cpu, a userspace tool for viewing info. Using fork of original to match ryzen_monitor_ng, a more advanced userspace tool for accessing the SMU via this kernel module, planned for a later commit.
2024-04-11 01:40:43 +00:00
./hardware/cpu/amd-ryzen-smu.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./hardware/cpu/intel-microcode.nix
nixos/intel-sgx: add option for SGX provisioning
2021-12-10 09:08:46 +00:00
./hardware/cpu/intel-sgx.nix
nixos/hardware/cpu/intel/msr: init
2023-10-04 12:53:28 +00:00
./hardware/cpu/x86-msr.nix
nixos/decklink: init
2020-11-02 19:26:11 +00:00
./hardware/decklink.nix
nixos/hardware.deviceTree: new module Add support for custom device-tree files, and applying overlays to them. This is useful for supporting non-discoverable hardware, such as sensors attached to GPIO pins on a Raspberry Pi.
2019-04-24 17:24:16 +00:00
./hardware/device-tree.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/digitalbitbox.nix
nixos/flipperzero: init
2023-02-19 07:55:13 +00:00
./hardware/flipperzero.nix
nixos/flirc: init module
2021-10-21 00:19:04 +00:00
./hardware/flirc.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/gkraken.nix
nixos/glasgow: init hardware module
2023-09-20 19:29:56 +00:00
./hardware/glasgow.nix
nixos/hardware/gpgSmartcard: init udev rules
2021-04-27 20:30:08 +00:00
./hardware/gpgsmartcards.nix
nixos/hardware/hackrf: new module This is a very this module to enable the hackrf udev rules and ensure the "plugdev" group they use exists.
2021-12-27 21:37:32 +00:00
./hardware/hackrf.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/i2c.nix
nixos/infiniband: add support for configurable guids
2023-09-06 11:39:04 +00:00
./hardware/infiniband.nix
nixos/hardware: add support for qmk keyboards
2023-02-15 03:33:56 +00:00
./hardware/keyboard/qmk.nix
nixos/teck: init
2021-04-19 11:57:32 +00:00
./hardware/keyboard/teck.nix
UHK-agent: Support for Ultimate Hacking Keyboard udev-rules and configuration application (#132420) * maintainers: add ngiger * uhk-agent: init at 1.5.17 * Apply suggestions from code review * Update pkgs/os-specific/linux/uhk-agent/default.nix * Apply suggestions from code review * Update pkgs/os-specific/linux/uhk-agent/default.nix Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
2022-05-08 20:40:52 +00:00
./hardware/keyboard/uhk.nix
nixos/zsa: init at unstable-2020-12-16 add support for ZSA keyboards Co-authored-by: Julien Debon <julien.debon@pm.me>
2020-06-20 22:41:09 +00:00
./hardware/keyboard/zsa.nix
nixos/hardware: Add option to enable KSM. This is essentially what's been done for the official NixOS build slaves and I'm using it as well for a few of my machines and my own Hydra slaves. Here's the same implementation from the Delft server configurations: https://github.com/NixOS/nixos-org-configurations/blob/f47c2fc7f82cc8aa4ea8047487cbb819d6829fe2/delft/common.nix#L91-L101 Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2015-04-01 17:55:49 +00:00
./hardware/ksm.nix
nixos/ledger: init
2019-02-14 00:19:56 +00:00
./hardware/ledger.nix
logitech (nixos): support module for logitech input devices
2019-03-11 05:10:31 +00:00
./hardware/logitech.nix
mcelog: init Machine Check Exception Logging Daemon service
2017-02-26 14:50:01 +00:00
./hardware/mcelog.nix
kernelPatches: ath driver: allow setting regulatory domain Ports an OpenWRT patch for Atheros wireless drivers (ath*) which allows the user to change the regulatory domain code to the one which actually applies. All Atheros devices have a regulatory domain burned into their EEPROM. When using a device as AP, this domain is frequently overly restrictive when compared to the regulation which applies in the country the device actually operates in; often, this restriction disallows IR on all channels making it impossible to use the device as an AP at all. This commit introduces the NixOS config option networking.wireless.athUserRegulatoryDomain which, if enabled, applies the patch and sets the kernel config option ATH_USER_REGD. The original OpenWRT patch targets Linux 5.8.
2021-01-04 18:47:44 +00:00
./hardware/network/ath-user-regd.nix
Add module for b43 firmware
2012-07-14 03:54:41 +00:00
./hardware/network/b43.nix
nixos: add hardware/network/intel-2200bg.nix to module-list this is referenced by nixos-generate-config.pl. See https://github.com/NixOS/nixpkgs/pull/63091 for more discussion.
2019-06-24 00:30:27 +00:00
./hardware/network/intel-2200bg.nix
new-lg4ff: init at 0.3.3
2022-05-27 15:00:06 +00:00
./hardware/new-lg4ff.nix
nitrokey module: init
2017-05-24 22:01:07 +00:00
./hardware/nitrokey.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/onlykey/default.nix
services.mesa -> hardware.opengl Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08 19:45:28 +00:00
./hardware/opengl.nix
nixos/hardware/openrazer: init at 2.6.0
2019-08-29 01:17:25 +00:00
./hardware/openrazer.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/opentabletdriver.nix
* Moved the last modules to modules/. svn path=/nixos/branches/modular-nixos/; revision=15795
2009-05-29 14:11:02 +00:00
./hardware/pcmcia.nix
nixos/printers: declarative configuration
2019-08-05 18:24:18 +00:00
./hardware/printers.nix
nixos/hardware/raid/hpsa: init at 2.40
2017-08-01 12:42:58 +00:00
./hardware/raid/hpsa.nix
nixos/hardware/rtl-sdr: new module This is a very thin module to ensure "plugdev" user exists and some udev rules are enabled, a prerequisite for using rtl-sdr.
2020-08-29 00:12:07 +00:00
./hardware/rtl-sdr.nix
nixos/saleae-logic: init
2022-05-23 18:56:46 +00:00
./hardware/saleae-logic.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/sata.nix
./hardware/sensor/hddtemp.nix
./hardware/sensor/iio.nix
nixos/steam-hardware: module init
2018-09-30 08:59:57 +00:00
./hardware/steam-hardware.nix
Add system76 NixOS module
2020-09-23 10:44:40 +00:00
./hardware/system-76.nix
nixos/tuxedo-keyboard: init module.
2019-11-21 22:10:41 +00:00
./hardware/tuxedo-keyboard.nix
nixos/hardware/ubertooth: init at 2018-12-R1
2020-05-13 16:39:36 +00:00
./hardware/ubertooth.nix
xow: init at 0.2
2019-12-22 20:10:48 +00:00
./hardware/uinput.nix
nixos/uni-sync: init
2024-03-12 15:03:59 +00:00
./hardware/uni-sync.nix
nixos/usb-modeswitch: Rename module from usbWwan
2023-07-20 20:20:33 +00:00
./hardware/usb-modeswitch.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/usb-storage.nix
amdgpu-pro: Init at 16.30.3-315407
2016-09-22 01:42:16 +00:00
./hardware/video/amdgpu-pro.nix
Upgrade bumblebee and add nixos module * Bump bumblebee to 3.2.1 * Remove config.patch - options it added can be passed to ./configure now * Remove the provided xorg.conf Provided xorg.conf was causing problems for some users, and Bumblebee provides its own default configuration anyway. * Make secondary X11 log to /var/log/X.bumblebee.log * Add a module for bumblebee
2014-02-08 18:47:51 +00:00
./hardware/video/bumblebee.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/video/capture/mwprocapture.nix
displaylink service: init
2016-08-27 16:55:56 +00:00
./hardware/video/displaylink.nix
Move the NVIDIA support into its own module Previously all card-specific stuff was scattered across xserver.nix and opengl.nix, which is ugly. Now it can be kept together in a single card-specific module. This required the addition of a few internal options: - services.xserver.drivers: A list of { name, driverName, modules, libPath } sets. - hardware.opengl.package: The OpenGL implementation. Note that there can be only one OpenGL implementation at a time in a system configuration (i.e. no dynamic detection). - hardware.opengl.package32: The 32-bit OpenGL implementation.
2014-04-29 12:16:34 +00:00
./hardware/video/nvidia.nix
nixos/switcheroo-control: add to modules-list.nix (#113052)
2021-02-14 00:06:01 +00:00
./hardware/video/switcheroo-control.nix
nixos/uvcvideo.dynctrl: Init
2018-06-09 05:59:21 +00:00
./hardware/video/uvcvideo/default.nix
facetimehd: init at git-20160127
2015-12-29 18:02:36 +00:00
./hardware/video/webcam/facetimehd.nix
nixos/hardware/ipu6: init
2023-04-08 13:04:47 +00:00
./hardware/video/webcam/ipu6.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./hardware/wooting.nix
nixos/xone: init
2022-02-19 23:25:42 +00:00
./hardware/xone.nix
nixos/xpadneo: init at 0.8.1 I just got an Xbox One controller and I wasn't satisfied with the xpad driver that ships with the Linux kernel xpadneo supports more features and fixes problems with incorrect button mappings https://atar-axis.github.io/xpadneo
2020-07-07 05:15:23 +00:00
./hardware/xpadneo.nix
input-method module: fix folder case
2016-04-12 10:46:12 +00:00
./i18n/input-method/default.nix
nixos/input-methods: add fcitx5
2020-12-13 03:29:58 +00:00
./i18n/input-method/fcitx5.nix
hime: fix enable hime, remove hime-all package - fix inputMethod.enable hime by adding module list - rm hime-all package, because chewing, anthy modules does not work well
2020-10-09 15:32:58 +00:00
./i18n/input-method/hime.nix
input-method module: fix folder case
2016-04-12 10:46:12 +00:00
./i18n/input-method/ibus.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./i18n/input-method/kime.nix
input-method module: fix folder case
2016-04-12 10:46:12 +00:00
./i18n/input-method/nabi.nix
./i18n/input-method/uim.nix
* Move the installer tools to modules/installer/tools. svn path=/nixos/branches/modular-nixos/; revision=15788
2009-05-29 12:41:29 +00:00
./installer/tools/tools.nix
* More cleanup. svn path=/nixos/branches/modular-nixos/; revision=15773
2009-05-28 16:20:08 +00:00
./misc/assertions.nix
Adding a module to get crash dumps using kexec. svn path=/nixos/trunk/; revision=33219
2012-03-17 22:21:37 +00:00
./misc/crashdump.nix
nixos: doc: introduce `documentation` config subtree
2018-03-26 18:22:04 +00:00
./misc/documentation.nix
Move most extra args out of eval-config.nix
2014-05-06 14:31:48 +00:00
./misc/extra-arguments.nix
* Move the uid/gid mappings into a module. This allows other modules to use it through config.ids.{uids,gids} rather than `import relative-path/ids.nix'. svn path=/nixos/branches/modular-nixos/; revision=15796
2009-05-29 14:25:56 +00:00
./misc/ids.nix
nixos: move nixosLabel to its own module
2016-08-01 00:00:00 +00:00
./misc/label.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./misc/lib.nix
Move boot loader modules to modules/system/boot/loader
2012-07-25 14:59:03 +00:00
./misc/locate.nix
nixos/documentation: move man-db-specifics into new man-db module It may be possible to revert the move of `documentation.man.manualPages` later. The problem is that other man implementations (mandoc) want to generate their index databases in place, so the approach taken here doesn't translate super well.
2021-09-24 17:20:23 +00:00
./misc/man-db.nix
./misc/mandoc.nix
NixOS: Add meta.maintainer option to modules.
2014-08-24 22:46:23 +00:00
./misc/meta.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./misc/nixops-autoluks.nix
* Added an option `nixpkgs.config' that allows the Nixpkgs options to be set from the NixOS configuration. For instance, you can say nixpkgs.config.firefox.enableGeckoMediaPlayer = true; environment.systemPackages = [ pkgs.firefox ]; but the more interesting application is to apply global overrides to Nixpkgs throughout NixOS, e.g. nixpkgs.config.packageOverrides = pkgs: { glibc = pkgs.glibc27; gcc = pkgs.gcc42; }; would build the whole system with Glibc 2.7 and GCC 4.2. (There are some issues with "useFromStdenv" in all-packages.nix that need to be fixed for packages in the stdenv bootstrap though.) The implementation of this option is kind of evil though due to the need to prevent a circularity between the evaluation of nixpkgs.config and the "pkgs" module argument. svn path=/nixos/trunk/; revision=16866
2009-08-26 16:52:38 +00:00
./misc/nixpkgs.nix
nixos/flake: put nixpkgs in NIX_PATH and system registry for flake configs Currently there are a bunch of really wacky hacks required to get nixpkgs path correctly set up under flake configs such that `nix run nixpkgs#hello` and `nix run -f '<nixpkgs>' hello` hit the nixpkgs that the system was built with. In particular you have to use specialArgs or an anonymous module, and everyone has to include this hack in their own configs. We can do this for users automatically. I have tested these manually with a basic config; I don't know if it is even possible to write a nixos test for it since you can't really get a string-with-context to yourself unless you are in a flake context.
2024-01-03 16:41:57 +00:00
./misc/nixpkgs-flake.nix
Adding back passthru functionality svn path=/nixos/branches/modular-nixos/; revision=16237
2009-07-08 09:10:48 +00:00
./misc/passthru.nix
* Add a command "nixos-version" that prints the version of the currently activated NixOS. This is "0.1pre-svn" when built from a SVN tree, but contains the actual revision when installed from the NixOS channel or from the ISO. svn path=/nixos/trunk/; revision=33730
2012-04-10 20:56:38 +00:00
./misc/version.nix
nixos/modules/misc/wordlist: init Addresses #16545. Allows for user defined environment variables that hold paths to wordlists. This is to allow for easy access to wordlists for users and scripts, (in other distributions a convenient wordlist is typically found in /usr/share/dict/words or similar). The default wordlist is the one found in scowl, for no other reason than that's the one that was mentioned in the linked issue. It is possible to specify multiple environment variables as well. This is for users who need multiple wordlists (such as multilingual users).
2022-02-03 19:48:10 +00:00
./misc/wordlist.nix
nixos/1password-gui: init at 8.6.0 Browser Integration requires setgid and setuid programs, which needs to be done in the system configuration. This is cleaner than the ad-hoc ways we have to set things up for platforms without a global configuration file.
2022-03-16 18:09:37 +00:00
./programs/_1password-gui.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/_1password.nix
adb: init module
2016-10-31 10:25:50 +00:00
./programs/adb.nix
nixos/alvr: init module
2024-01-27 17:06:23 +00:00
./programs/alvr.nix
appgate-sdp: add appgate-sdp to modules list
2021-01-10 10:13:07 +00:00
./programs/appgate-sdp.nix
nixos/appimage: init
2024-03-12 22:13:01 +00:00
./programs/appimage.nix
atop: Add basic config option for /etc/atoprc
2013-05-23 11:04:07 +00:00
./programs/atop.nix
nixos/ausweisapp: init module with firewall option Optional functionality of AusweisApp2 requires an UDP port to be opened. The module allows for convenient configuration and serves as documentation. See also https://github.com/NixOS/nixpkgs/issues/136269
2021-09-04 21:03:26 +00:00
./programs/ausweisapp.nix
autojump: creates links required by oh-my-zsh for autojump. The autojump plugin in oh-my-zsh assumes autojump.zsh resides in /run/current-system/sw/share/autojump/ but these links are not created by default. The new programs.autojump.enable option forces the creation of these links.
2018-09-25 14:18:42 +00:00
./programs/autojump.nix
bandwhich: 0.5.1 -> 0.6.0 - Rename from `what` to `bandwhich` - Add Security for darwin
2019-12-31 08:17:28 +00:00
./programs/bandwhich.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/bash-my-aws.nix
modules/programs/bash: move prompt plugins into separate modules
2021-05-03 18:24:24 +00:00
./programs/bash/bash-completion.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/bash/bash.nix
blesh: init module
2022-12-06 20:23:25 +00:00
./programs/bash/blesh.nix
modules/programs/bash: move prompt plugins into separate modules
2021-05-03 18:24:24 +00:00
./programs/bash/ls-colors.nix
modules/programs/bash: add support for undistract-me
2021-05-03 18:25:02 +00:00
./programs/bash/undistract-me.nix
nixos/bcc: init module Looks trival, but it is easy to make the mistake to add linuxPackages.bcc to systemPackages, which breaks if the not the default kernel is used.
2017-09-29 14:13:34 +00:00
./programs/bcc.nix
browserpass: init at 1.0.2
2017-04-10 17:53:16 +00:00
./programs/browserpass.nix
programs/calls: init
2021-07-27 15:13:37 +00:00
./programs/calls.nix
captive-browser: init at 2019-04-14
2019-03-21 12:23:12 +00:00
./programs/captive-browser.nix
nixos/ccache: init
2017-08-08 01:16:52 +00:00
./programs/ccache.nix
Move cdemu module into programs
2015-02-10 10:52:46 +00:00
./programs/cdemu.nix
nixos/cfs-zen-tweaks: init Co-authored-by: Aaron Andersen <aaron@fosslib.net>
2021-11-24 07:07:08 +00:00
./programs/cfs-zen-tweaks.nix
chromium module: add support for chromium policies as nixos module
2016-12-10 19:34:54 +00:00
./programs/chromium.nix
nixos/clash-verge: init module
2023-03-27 06:18:13 +00:00
./programs/clash-verge.nix
nixos/cnping: init
2021-08-21 02:43:43 +00:00
./programs/cnping.nix
Revert "command-not-found: disable module until it's fixed again" This reverts commit 2a3c0ca3d5ab0fe9aaa312199b3cad5bc9a01934.
2016-08-10 16:09:40 +00:00
./programs/command-not-found/command-not-found.nix
coolercontrol.*: init at 1.1.1
2024-02-11 20:17:19 +00:00
./programs/coolercontrol.nix
programs.criu: add nixos option for installing criu + kernel flags
2018-02-09 22:10:56 +00:00
./programs/criu.nix
nixos/darling: init
2023-05-01 23:39:19 +00:00
./programs/darling.nix
gdm: Add very experimental display manager
2014-04-02 16:21:00 +00:00
./programs/dconf.nix
digitalbitbox: init at 2.2.2 (#33787) * digitalbitbox: init at 2.2.2 The commits that lead to this have been squashed from independent commits see branch @vidbina/add/digitalbitbox-wip that did the following: - 0a3030fa0ec digitalbitbox: init at 2.2.2 - c18ffa3ffd4 digitalbitbox: moved meta to EOF - 0c5f3d6972a digitalbitbox: using preConfigure + configureFlags - a85b1dfc3fd digitalbitbox: nativeBuildInputs - 90bdd35ef0f digitalbitbox: autoreconfHook - 91810eea055 digitalbitbox: default installPhase & makeWrapper - 90e43fb7e2a digitalbitbox: doc rm $PWD hack & printf-tee deal - fd033b2fe5a digitalbitbox: cleanup, alphabetically sort attrs - c5907982db3 digitalbitbox: added hardware module - 88e46bc9ae0 digitalbitbox: added program module - amend to change name: dbb-app -> digitalbitbox - amend to add install instructions based on feedback (https://github.com/NixOS/nixpkgs/pull/33787#issuecomment-362813149) - amend to add longDescription - moved program to its own dir - overridable udev rules handling - added docs to manual - added package attr to program module - added package attr to hardware module * digitalbitbox: use libsForQt5.callPackage
2018-02-27 22:40:22 +00:00
./programs/digitalbitbox/default.nix
nixos/direnv: init
2023-07-04 17:04:42 +00:00
./programs/direnv.nix
nixos/dmrconfig: Add module to enable udev rules
2018-11-07 17:34:37 +00:00
./programs/dmrconfig.nix
nixos/droidcam: init (#109267) Co-authored-by: Pascal Bach <pascal.bach@nextrem.ch>
2021-04-05 19:32:21 +00:00
./programs/droidcam.nix
nixos/dublin-traceroute: init
2023-11-27 17:45:10 +00:00
./programs/dublin-traceroute.nix
Add `programs.ecryptfs` for mount wrappers. The `ecryptfs` package refers to the setuid wrapper paths, but they do not exist so far in NixOS.
2022-09-12 15:32:56 +00:00
./programs/ecryptfs.nix
Radically change the way NixOS handles environment variables and make it possible not to use Bash as the default interactive shell. This change does two things: * "NixOSizes" environment variables generation. This allows some more error-checking and opens possibilities for a modular environment configuration. From now on the most of environment variables are generated directly by the nix code. Generating sh code that generates environment variables is left in a few places where nontrivial access to a local environment state is needed. * By doing the first change this patch untangles bash from the environment configuration and makes it trivial to add a support for other non bash-compatible shells. Now to the sad part. This change is quite large (and I'm not sure it's possible to split it) and yet is not quite complete, it needs some changes to nixpkgs to be perfect. See !!! comments in modules/config/shells-environment.nix. Main principle behind this change is "change environment generation and nothing else". In particular, shell configuration principles stay exactly the same as before.
2013-09-18 03:18:34 +00:00
./programs/environment.nix
nixos/evince: move to programs
2019-08-09 16:26:15 +00:00
./programs/evince.nix
nixos/extra-container: init
2021-09-30 19:03:20 +00:00
./programs/extra-container.nix
nixos/feedbackd: init
2021-05-01 06:04:49 +00:00
./programs/feedbackd.nix
nixos/file-roller: move to programs
2019-08-09 16:28:41 +00:00
./programs/file-roller.nix
nixos/firefox: init
2022-11-10 19:07:37 +00:00
./programs/firefox.nix
firejail: add nixos module Also add support for wrapping binaries with firejail.
2018-07-14 05:25:28 +00:00
./programs/firejail.nix
fish: add module to support it as default shell * Patched fish to load /etc/fish/config.fish if it exists (by default, it only loads config relative to itself) * Added fish-foreign-env package to parse the system environment closes #5331
2015-12-25 00:17:42 +00:00
./programs/fish.nix
flashrom: Install udev-rules file Add the udev-rules file from flashrom source to the out directory. The file contains rules for programmers used by flashrom. Members of the `flashrom` system group are allowed to access these devices. Also, add a module for installing flashrom and adding flashrom to udev packages. The module can be used by setting `programs.flashrom.enable` to `true`. Signed-off-by: Felix Singer <felixsinger@posteo.net>
2021-06-26 01:37:52 +00:00
./programs/flashrom.nix
nixos/flexoptix-app: Add the module
2021-04-17 16:33:41 +00:00
./programs/flexoptix-app.nix
Make it possible to disable "info"
2016-09-05 12:16:33 +00:00
./programs/freetds.nix
nixos/fuse: init Add a module for /etc/fuse.conf. Fixes #30923.
2019-08-11 13:36:33 +00:00
./programs/fuse.nix
fzf: init module
2022-11-11 20:08:36 +00:00
./programs/fzf.nix
nixos/gamemode: add module
2021-05-18 00:31:45 +00:00
./programs/gamemode.nix
nixos: add module for GameScope
2022-08-19 19:16:51 +00:00
./programs/gamescope.nix
nixos/geary: init
2020-01-10 00:33:38 +00:00
./programs/geary.nix
nixos/git: init
2021-09-10 22:46:48 +00:00
./programs/git.nix
nixos/gnome-disks: move to programs
2019-08-09 16:33:49 +00:00
./programs/gnome-disks.nix
nixos/gnome-terminal: init This module obsoletes services.gnome3.gnome-terminal-server as that's a confusing option for users, and sounds internal. It's much simpler to have a gnome-terminal module.
2019-08-21 19:58:59 +00:00
./programs/gnome-terminal.nix
gnupg agent module: init Creates a systemd user service and updates the tty on new logins so that gpg-agent may find the current tty even if the SSH agent mode is used.
2017-05-25 19:14:39 +00:00
./programs/gnupg.nix
nixos/goldwarden: init
2024-03-24 18:32:26 +00:00
./programs/goldwarden.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/gpaste.nix
gphoto2: nixos programs module to configure udev Closes #21420.
2016-12-27 18:39:53 +00:00
./programs/gphoto2.nix
nixos/haguichi: init
2022-04-23 14:24:36 +00:00
./programs/haguichi.nix
hamster: init at 3.0.2
2020-06-10 15:31:46 +00:00
./programs/hamster.nix
nixos/htop: add module This module allows setting global configuration for htop in /etc/htoprc, for example to disable showing userland threads by default Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> Co-authored-by: Aaron Andersen <aaron@fosslib.net>
2021-09-21 14:07:35 +00:00
./programs/htop.nix
nixos/iay: add module; iay: add myself as a maintainer Signed-off-by: Masanori Ogino <167209+omasanori@users.noreply.github.com>
2022-12-26 04:59:20 +00:00
./programs/iay.nix
nixos/iftop: add module This patch is heavily inspired by bd0d8ed807d29faa3deee96bafcbbd76c8fa4060 which added a setcap wrapper for `mtr` in order to allow running `mtr` without `sudo`. The need for the capability `cap_net_raw` that can be registered using `setcap` has been documented in the Arch Wiki: https://wiki.archlinux.org/index.php/Capabilities#iftop A simple testcase has been added which starts two machines, one with a setcap wrapper for `iftop`, one without. Both testcases monitor the bandwidth usage of the machine using the options `-t -s 1` once, the machine with setcap wrapper is expected to succeed, the `iftop` on the machine without setcap wrapper is expected to return a non-zero exit code.
2018-04-07 13:06:51 +00:00
./programs/iftop.nix
nixos/i3lock: i3lock program with u2fSupport option i3lock program with option to enable u2fAuth.
2022-12-11 00:40:07 +00:00
./programs/i3lock.nix
nixos/iotop: add module The `iotop` program can't be started by an unprivileged user because of missing root privileges. The issue can be fixed by creating a setcap wrapper for `iotop` which contains `cap_net_admin`.
2018-12-08 20:48:00 +00:00
./programs/iotop.nix
java program: Init. Mostly just provides a shell hook for the jdk's setup-hook. Tested with openjdk and jre.
2016-03-04 00:53:42 +00:00
./programs/java.nix
nixos/joycond-cemuhook: fix missing module It seems that the joycond-cemuhook.nix module was missing from the module-list.nix. This commit should fix that problem.
2024-03-08 01:17:46 +00:00
./programs/joycond-cemuhook.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/k3b.nix
nixos/k40-whisperer: module init
2022-02-24 14:15:36 +00:00
./programs/k40-whisperer.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/kbdlight.nix
nixos/kclock: integrate with dbus
2022-03-05 11:38:36 +00:00
./programs/kclock.nix
nixos: add programs.kdeconnect option
2019-06-28 15:28:37 +00:00
./programs/kdeconnect.nix
nixos/lazygit: init Update nixos/modules/programs/lazygit.nix Co-authored-by: Aleksana <alexander.huang.y@gmail.com> Update nixos/modules/programs/lazygit.nix Co-authored-by: Aleksana <alexander.huang.y@gmail.com>
2024-04-08 12:41:09 +00:00
./programs/lazygit.nix
nixos/kubeswitch: init Add a module to activate the kubeswitch in the shell
2024-04-11 22:46:02 +00:00
./programs/kubeswitch.nix
nixos/less configure less with module
2018-01-20 19:12:40 +00:00
./programs/less.nix
nixos/liboping: add module This creates setcap wrappers for oping and noping to allow unprivileged users to use those as well.
2020-01-16 17:06:35 +00:00
./programs/liboping.nix
Add "light" package and setuid wrapper
2014-11-10 02:32:11 +00:00
./programs/light.nix
nixos/mdevctl: init module
2022-11-07 08:40:54 +00:00
./programs/mdevctl.nix
mepo: init module
2022-10-21 16:00:53 +00:00
./programs/mepo.nix
mininet: init at 2.3.0d4 (#41261) Mininet (https://github.com/mininet/mininet) is a popular network emulator that glues several components such as network namespaces, traffic control commands into a set of python bindings. It is then "easy" to describe a topology and run experiments on it.
2018-11-21 23:33:10 +00:00
./programs/mininet.nix
nixos/minipro: add to module list
2023-04-10 18:54:59 +00:00
./programs/minipro.nix
nixos/miriway: init
2023-02-03 11:56:41 +00:00
./programs/miriway.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/mosh.nix
mouse-actions: init at 0.4.4 Co-authored-by: Donovan Glover <donovan@dglover.co> Co-authored-by: Arne Keller <2012gdwu+github@posteo.de>
2023-11-02 16:17:33 +00:00
./programs/mouse-actions.nix
nixos/msmtp: add msmtp module This adds a module for msmtp, a simple SMTP client which provides a sendmail-compatible interface. GitHub: see also nixpkgs issue #105710
2020-12-03 21:23:20 +00:00
./programs/msmtp.nix
programs.mtr: init setcap-wrapper
2017-02-17 19:14:59 +00:00
./programs/mtr.nix
nano: support system-wide nanorc This patch does two things 1. builds nano with sysconfdir=/etc; and 2. adds an option programs.nano.nanorc
2014-08-01 11:08:13 +00:00
./programs/nano.nix
nixos/nautilus-open-any-terminal: add to module-list.nix
2024-02-03 14:27:31 +00:00
./programs/nautilus-open-any-terminal.nix
nbd: add programs.nbd, services.nbd, and test Changes: nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/tests/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: generalize options in nbd service nbd: harden service nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: refactor code a bit and BindPaths automatically
2022-03-06 13:49:57 +00:00
./programs/nbd.nix
programs.neovim: init (#98506) * programs.neovim: init Allows to build a proper runtime folder with after/ ftplugin/ parser/ subfolders etc. (neo)vim expects a few different folders, for instance to load treesitter parsers. This PR reuses the builder from the etc module, notwithstanding the different modes/uid/gid. This allows to get rid of some autocmd in customRC (via proper use of the folder hierarchy) which is a win in my opinion.
2020-09-28 15:07:45 +00:00
./programs/neovim.nix
programs/nethoscope: add security.wrapper
2021-03-07 10:38:12 +00:00
./programs/nethoscope.nix
nixos/nexttrace: init
2023-03-08 03:21:06 +00:00
./programs/nexttrace.nix
nixos/nh: init
2024-03-11 08:05:40 +00:00
./programs/nh.nix
nixos/nix-index: add module
2022-12-25 17:48:59 +00:00
./programs/nix-index.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/nix-ld.nix
nixos/nm-applet: add nm-applet program
2018-12-02 11:18:47 +00:00
./programs/nm-applet.nix
nixos: init programs/nncp module The NNCP utilities read a configuration at "/etc/nncp.hjson" by default. Add a NixOS module for generating this configuration.
2022-02-26 16:53:26 +00:00
./programs/nncp.nix
nixos/noisetorch: init NoiseTorch needs setcap set to 'cap_sys_resource=+ep' to work correctly accordingly to the README.md: https://github.com/lawl/NoiseTorch#download--install So this PR adds it.
2021-02-22 17:02:35 +00:00
./programs/noisetorch.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/npm.nix
ns-usbloader: init at 7.0
2023-07-29 17:28:32 +00:00
./programs/ns-usbloader.nix
oblogout: init at 2009-11-18
2016-10-23 09:45:30 +00:00
./programs/oblogout.nix
nixos/oddjob: init at 0.34.7
2023-07-08 17:54:25 +00:00
./programs/oddjobd.nix
nixos/openvpn3: add enable option
2022-06-07 11:42:23 +00:00
./programs/openvpn3.nix
nixos/pantheon-tweaks: init
2021-09-18 14:05:07 +00:00
./programs/pantheon-tweaks.nix
nixos/partition-manager: init
2021-02-22 14:35:43 +00:00
./programs/partition-manager.nix
nixos/plotinus: add module to enable plotinus
2018-02-14 20:34:50 +00:00
./programs/plotinus.nix
nixos/modules: add missing projecteur entry
2023-10-18 07:09:15 +00:00
./programs/projecteur.nix
nixos/proxychains: init
2020-04-28 16:32:22 +00:00
./programs/proxychains.nix
nixos/qdmr: init
2023-01-18 20:46:53 +00:00
./programs/qdmr.nix
qt5ct: add a nixos module to enable qt5ct In order to use qt5ct (Qt5 Configuration Tool) to configure Qt5 settings (theme, font, icons, etc.) under DE/WM without Qt integration, the environment variable QT_QPA_PLATFORMTHEME should be set to "qt5ct". It can be done automatically by this module, or by setting the variable explicitly in the user or in the system configuration.
2017-03-24 14:13:06 +00:00
./programs/qt5ct.nix
nixos/quark-goldleaf: init
2023-11-24 00:07:31 +00:00
./programs/quark-goldleaf.nix
nixos/regreet: init
2023-03-13 21:35:06 +00:00
./programs/regreet.nix
nixos/rog-control-center: init
2022-12-03 16:09:28 +00:00
./programs/rog-control-center.nix
nixos/rust-motd: init Makes it easier to configure `rust-motd`. Currently, it takes care of the following things: * Creating a timer to regularly refresh the `motd`-text and a hardened service (which is still root to get access to e.g. fs-mounts, but read-only because of hardening flags). * Disabling `PrintLastLog` in `sshd.conf` if the last-login feature of `rust-motd` is supposed to be used. * Ensure that the banner is actually shown when connecting via `ssh(1)` to a remote server with this being enabled.
2022-08-29 11:48:40 +00:00
./programs/rust-motd.nix
nixos/ryzen-monitor-ng: init module A userspace tool for setting and getting AMD CPU power and performance parameters. The module adds `ryzen_monitor_ng` to `environment.systemPackages` and enables the `ryzen-smu` module, as `ryzen_monitor_ng` requires the `ryzen_smu` kernel module to function.
2024-04-11 01:46:59 +00:00
./programs/ryzen-monitor-ng.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./programs/screen.nix
nixos/seahorse: move to programs
2019-08-27 08:03:10 +00:00
./programs/seahorse.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/sedutil.nix
./programs/shadow.nix
nixos/sharing: init Co-Authored-By: fee1-dead <ent3rm4n@gmail.com>
2023-01-09 05:17:59 +00:00
./programs/sharing.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/singularity.nix
skim: init module
2022-12-03 18:12:04 +00:00
./programs/skim.nix
slock: needs the ability to be install with suid privileges
2017-03-30 21:22:31 +00:00
./programs/slock.nix
nixos/sniffnet: init
2023-05-09 19:48:56 +00:00
./programs/sniffnet.nix
spacefm: sudo and gksu fixes #15758 and license update
2016-07-01 15:40:21 +00:00
./programs/spacefm.nix
* New directory modules/programs that contains system-wide configuration for specific programs. For instance, ssh.nix provides the configuration for the SSH client; ssmtp.nix provides the configuration for the `ssmtp' MTA. svn path=/nixos/branches/modular-nixos/; revision=15757
2009-05-27 23:59:14 +00:00
./programs/ssh.nix
nixos/starship: init
2021-12-23 22:22:39 +00:00
./programs/starship.nix
nixos/steam: init
2020-05-01 14:50:28 +00:00
./programs/steam.nix
nixos/streamdeck-ui: init
2022-07-08 16:49:09 +00:00
./programs/streamdeck-ui.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/sysdig.nix
nixos/system-config-printer: init
2019-08-27 19:39:48 +00:00
./programs/system-config-printer.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/systemtap.nix
thefuck: init at 3.18 (#26529)
2017-06-14 08:57:38 +00:00
./programs/thefuck.nix
nixos/thunar: init - Add a module for the thunar file manager, which depends on the xfconf dbus service, and also has a dbus service and a systemd unit. - Renames the option services.xserver.desktopManager.xfce.thunarPlugins to programs.thunar.plugins.
2022-06-26 14:25:57 +00:00
./programs/thunar.nix
tmux nixos module: add nixos program module for tmux This basic module allows you to specify the tmux configuration. As great as tmux is, some of the defaults are pretty awful, so having a way to specify the config really helps.
2016-03-23 07:33:28 +00:00
./programs/tmux.nix
nixos/traceroute: init
2020-01-17 21:25:34 +00:00
./programs/traceroute.nix
nixos/trippy: init
2023-05-13 17:24:04 +00:00
./programs/trippy.nix
nixos/tsm-client: init module This commit brings a module that installs the IBM Spectrum Protect (Tivoli Storage Manager) command-line client together with its system-wide client system-options file `dsm.sys`.
2019-05-15 16:17:30 +00:00
./programs/tsm-client.nix
turbovnc: Add programs.turbovnc, add test for headless software OpenGL
2021-03-14 05:13:41 +00:00
./programs/turbovnc.nix
nixos udevil: set up wrapper for udevil
2018-02-26 05:36:16 +00:00
./programs/udevil.nix
nixos/usbtop: Add module to install usbtop and to enable kernel module
2019-08-30 11:51:10 +00:00
./programs/usbtop.nix
vim module: init
2016-10-10 20:49:43 +00:00
./programs/vim.nix
nixos/module-list: add virt-manager Was missed in #261474
2023-11-03 22:02:27 +00:00
./programs/virt-manager.nix
nixos/wavemon: create module
2018-09-07 17:52:54 +00:00
./programs/wavemon.nix
nixos/cardboard: init Copy-inspired from river.
2023-10-21 01:26:04 +00:00
./programs/wayland/cardboard.nix
nixos/labwc: init
2024-01-05 01:01:11 +00:00
./programs/wayland/labwc.nix
nixos/hyprland: move to programs/wayland Just moved to hyprland module to programs/wayland. This has no effect on the module side (still accessed the same way in the module `programs.hyprland`) just moved to be inline with other wayland compositors. Also edit the module list to reflect where the file is located.
2023-11-13 08:47:06 +00:00
./programs/wayland/hyprland.nix
nixos/river: init module
2023-05-15 11:45:23 +00:00
./programs/wayland/river.nix
nixos/programs: factor out wayland-session common options
2023-05-15 11:45:09 +00:00
./programs/wayland/sway.nix
./programs/wayland/waybar.nix
nixos/wayfire: init
2023-07-16 15:11:54 +00:00
./programs/wayland/wayfire.nix
nixos/weylus: init
2021-09-02 02:20:00 +00:00
./programs/weylus.nix
nixos/winbox: init
2023-12-15 18:48:49 +00:00
./programs/winbox.nix
nixos: add programs.wireshark option To be able to use Wireshark as an ordinary user, the 'dumpcap' program must be installed setuid root. This module module simplifies such a configuration to simply: programs.wireshark.enable = true; The setuid wrapper is available for users in the 'wireshark' group. Changes v1 -> v2: - add "defaultText" to the programs.wireshark.package option (AFAIK, that prevents the manual from being needlessly rebuilt when the package changes)
2017-02-16 20:53:09 +00:00
./programs/wireshark.nix
nixos/xastir: init
2022-12-25 23:44:40 +00:00
./programs/xastir.nix
wshowkeys: init at 2019-09-26
2020-03-23 14:17:37 +00:00
./programs/wshowkeys.nix
nixos/xfconf: init - Add a module for xfconf, the Xfce configuration storage system.
2022-06-26 16:54:59 +00:00
./programs/xfconf.nix
nixos xfs_quota: add new module for managing xfs_quota projects
2015-08-19 14:05:25 +00:00
./programs/xfs_quota.nix
nixos: init programs.xonsh
2016-07-20 22:55:36 +00:00
./programs/xonsh.nix
nixos/xss-lock: add module (#40619) `xsslock` (which was originally packaged in 6cb1d1aaaf02a72329bedf9c6960e54fea6f5c6e) is a simple screensaver which connects a given screen locker (e.g. `i3lock`) with `logind`. Whenever `loginctl lock-sessions` is invoked the locker will be used to lock the screen. This works with its power management features (e.g. `lid switch`) as well, so the PC can be locked automatically when the lid is closed. The module can be used like this: ``` { services.xserver.enable = true; programs.xss-lock.enable = true; programs.xss-lock.lockerCommand = "i3lock"; } ```
2018-05-18 16:24:53 +00:00
./programs/xss-lock.nix
nixos/xwayland: add new module and allow configuring a default font path - Add option `programs.xwayland.defaultFontPath` - Modify sway to enable Xwayland
2020-09-02 01:59:58 +00:00
./programs/xwayland.nix
yabar: add module To make the configuration of `yabar` more pleasant and easier to validate, a NixOS module will be quite helpful. An example config could look like this: ``` { programs.yabar = { enable = true; bars.top.indicators.exec = "YA_DATE"; }; } ``` The module adds a user-controlled systemd service which runs `yabar` after starting up X.
2017-12-12 00:14:00 +00:00
./programs/yabar.nix
nixos/yazi: add to module-list.nix
2023-09-13 06:19:04 +00:00
./programs/yazi.nix
nixos/yubikey-touch-detector: init (#254947) * nixos/yubikey-touch-detector: init * nixos/yubikey-touch-detector: enable user socket
2023-09-14 20:15:32 +00:00
./programs/yubikey-touch-detector.nix
nixos/zmap: init module The module installs `zmap` globally and links the config files to `/etc/zmap`, the default location of config files for zmap. The package provides pretty much a sensitive default, custom configs can be created like this: ``` { lib, ... }: { environment.etc."zmap/blacklist.conf" = lib.mkForce { text = '' # custom zmap blacklist 0.0.0.0/0 ''; }; } ```
2019-05-10 06:12:27 +00:00
./programs/zmap.nix
oh-my-zsh: add module (#25140) * programs.zsh: add enableOhMyZsh option to automate setup of oh-my-zsh in global zshrc * programs.zsh: make oh-my-zsh plugins configurable * programs.zsh: add ohMyZshCustom option * programs.zsh: add ohMyZshTheme option * programs.zsh: applying minor fixes to evaluate expressions properly * programs.zsh: fix ordering of oh-my-zsh config and execution * programs.zsh: move all oh-my-zsh params into its own scope named programs.zsh.oh-my-zsh
2017-04-23 11:58:07 +00:00
./programs/zsh/oh-my-zsh.nix
zsh-autoenv: init at 2017-12-16 (#34932)
2018-02-14 06:31:59 +00:00
./programs/zsh/zsh-autoenv.nix
nixos/autosuggestions: add module (#41397) The `zsh-autosuggestions` package provides several configuration options such as a different highlight style (like `fg=cyan` which is easier to read). With `rename.nix` the old `programs.zsh.enableAutosuggestions` is still functional, but yields the following warning like this during evaluation: ``` trace: warning: The option `programs.zsh.enableAutosuggestions' defined in `<unknown-file>' has been renamed to `programs.zsh.autosuggestions.enable'. ``` The module provides the most common `zsh-autosuggestions` (highlight style and strategy) as options that will be written into the interactive shell init (`/etc/zshrc` by default). Further configuration options can be declared using the `extraConfig` attr set: ``` { programs.zsh.autosuggestions.extraConfig = { "ZSH_AUTOSUGGEST_BUFFER_MAX_SIZE" = "buffer_size"; }; } ``` A full list of available configuration options for `zsh-autosuggestions` can be viewed here: https://github.com/zsh-users/zsh-autosuggestions/blob/v0.4.3/README.md
2018-06-10 21:08:50 +00:00
./programs/zsh/zsh-autosuggestions.nix
zsh-syntax-highlighting: Add more configuration options and move to module (#25153) * programs.zsh: factor zsh-syntax-highlighting out into its own module * programs.zsh.syntax-highlighting: add `highlighters` option * programs.zsh: document BC break introduced by moving zsh-syntax-completion into its own module
2017-04-23 19:17:31 +00:00
./programs/zsh/zsh-syntax-highlighting.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./programs/zsh/zsh.nix
Add a renaming module. This module introduce the rename function to fetch definitions of oldest options and to add them inside the new option. Properties are still valid and will not be affected by the renaming. e.g: with: rename alias "foo.bar" to "baz.quz" and with the following module: { foo.bar = (mkOverride 10 {}) 42; baz.quz = 21; } the result of baz.quz would be 42 because the priority is still working after the renaming. svn path=/nixos/trunk/; revision=17484
2009-09-28 18:26:13 +00:00
./rename.nix
nixos/acme: ensure web servers using certs can access them
2022-01-08 20:05:34 +00:00
./security/acme
AppArmor: packaged
2012-07-16 23:47:41 +00:00
./security/apparmor.nix
security.audit: add NixOS module Part of the way towards #11864. We still don't have the auditd userland logging daemon, but journald also tracks audit logs so we can already use this.
2016-01-07 03:06:10 +00:00
./security/audit.nix
nixos/auditd: init at 2.7.6 (#27261) #11864 Support Linux audit subsystem Add the auditd.service as NixOS module to be able to generate profiles from /var/log/audit/audit.log with apparmor-utils. auditd needs the folder /var/log/audit to be present on start so this is generated in ExecPreStart. auditd starts with -s nochange so that effective audit processing is managed by the audit.service.
2017-07-09 16:59:09 +00:00
./security/auditd.nix
* Provide a bundle of CA certificates in /etc/ca-bundle.crt, and set the CURL_CA_BUNDLE environment variable. This allows curl to work without the `-k' flag on https sites with a properly signed certificate. svn path=/nixos/trunk/; revision=19572
2010-01-20 14:22:47 +00:00
./security/ca.nix
chromium: add nixos module security.chromiumSuidSandbox Closes #17460 Changed the wrapper derivation to produce a second output containing the sandbox. Add a launch wrapper to try and locate the sandbox (either in /var/setuid-wrappers or in /nix/store). This launch wrapper also sheds libredirect.so from LD_PRELOAD as Chromium does not tolerate it. Does not trigger a Chromium rebuild. cc @cleverca22 @joachifm @jasom
2016-08-06 08:13:20 +00:00
./security/chromium-suid-sandbox.nix
dhparams module: initialize
2017-02-10 17:36:36 +00:00
./security/dhparams.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./security/doas.nix
nixos: add Duo Security module This module adds the security.duosec attributes, which you can use to enable simple two-factor authentication for NixOS logins. The module currently provides PAM and SSH support, although the PAM unix system configuration isn't automatically dealt with (although the configuration is automatically built). Enabling it is as easy as saying: security.duosec.ssh.enable = true; security.duosec.ikey = "XXXXXXXX..."; security.duosec.skey = "XXXXXXXX..."; security.duosec.host = "api-XXXXXXX.duosecurity.com"; security.duosec.group = "duosec"; which will enforce two-factor authentication for SSH logins for users in the 'duosec' group. This requires uid/gid support in the environment.etc module. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-02-18 09:38:35 +00:00
./security/duosec.nix
config.security.googleOsLogin: add module The OS Login package enables the following components: AuthorizedKeysCommand to query valid SSH keys from the user's OS Login profile during ssh authentication phase. NSS Module to provide user and group information PAM Module for the sshd service, providing authorization and authentication support, allowing the system to use data stored in Google Cloud IAM permissions to control both, the ability to log into an instance, and to perform operations as root (sudo).
2018-12-12 12:55:25 +00:00
./security/google_oslogin.nix
nixos/freeipa: init
2023-03-16 06:40:13 +00:00
./security/ipa.nix
nixos/krb5: move to security.krb5
2023-07-24 21:12:29 +00:00
./security/krb5
nixos: add option to lock kernel modules Adds an option `security.lockKernelModules` that, when enabled, disables kernel module loading once the system reaches its normal operating state. The rationale for this over simply setting the sysctl knob is to allow some legitmate kernel module loading to occur; the naive solution breaks too much to be useful. The benefit to the user is to help ensure the integrity of the kernel runtime: only code loaded as part of normal system initialization will be available in the kernel for the duration of the boot session. This helps prevent injection of malicious code or unexpected loading of legitimate but normally unused modules that have exploitable bugs (e.g., DCCP use after free CVE-2017-6074, n_hldc CVE-2017-2636, XFRM framework CVE-2017-7184, L2TPv3 CVE-2016-10200). From an aestethic point of view, enabling this option helps make the configuration more "declarative". Closes https://github.com/NixOS/nixpkgs/pull/24681
2017-04-06 14:12:21 +00:00
./security/lock-kernel-modules.nix
nixos/security/misc: init A module for security options that are too small to warrant their own module. The impetus for adding this module is to make it more convenient to override the behavior of the hardened profile wrt user namespaces. Without a dedicated option for user namespaces, the user needs to 1) know which sysctl knob controls userns 2) know how large a value the sysctl knob needs to allow e.g., Nix sandbox builds to work In the future, other mitigations currently enabled by the hardened profile may be promoted to options in this module.
2018-10-14 22:39:26 +00:00
./security/misc.nix
config.security.oath: new module Add a module to make options to pam_oath module configurable. These are: - enable - enable the OATH pam module - window - number of OTPs to check - digits - length of the OTP (adds support for two-factor auth) - usersFile - filename to store OATH credentials in
2016-02-24 21:41:02 +00:00
./security/oath.nix
* Move PAM configuration to modules/security/pam.nix. svn path=/nixos/branches/modular-nixos/; revision=15766
2009-05-28 13:10:02 +00:00
./security/pam.nix
pam_mount module: integrate pam_mount into PAM of NixOS
2015-07-02 14:46:56 +00:00
./security/pam_mount.nix
nixos/please: init module Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
2022-09-29 21:12:29 +00:00
./security/please.nix
Enable polkit-1 Now both polkit-1 and old policykit are enabled. Packages that can use both will be migrated to new polkit-1, than old one can be disabled. svn path=/nixos/trunk/; revision=21776
2010-05-14 20:28:04 +00:00
./security/polkit.nix
Add rngd service. Inspired by http://pkgs.fedoraproject.org/cgit/rng-tools.git/tree/rngd.service?id=27b1912b2d9659b6934fd4c887e46c13958e7e3c
2012-11-22 07:07:25 +00:00
./security/rngd.nix
* Add a module for rtkit. The PulseAudio module enables rtkit to acquire real-time priority. svn path=/nixos/trunk/; revision=27963
2011-07-26 14:14:10 +00:00
./security/rtkit.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./security/sudo.nix
nixos/sudo-rs: init adds a new sudo-rs module that contains sudo-rs changes removed from sudo module
2023-09-21 12:58:59 +00:00
./security/sudo-rs.nix
nixos/systemd-chroot: Rename chroot to confinement Quoting @edolstra from [1]: I don't really like the name "chroot", something like "confine[ment]" or "restrict" seems better. Conceptually we're not providing a completely different filesystem tree but a restricted view of the same tree. I already used "confinement" as a sub-option and I do agree that "chroot" sounds a bit too specific (especially because not *only* chroot is involved). So this changes the module name and its option to use "confinement" instead of "chroot" and also renames the "chroot.confinement" to "confinement.mode". [1]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-472855704 Signed-off-by: aszlig <aszlig@nix.build>
2019-03-14 14:26:10 +00:00
./security/systemd-confinement.nix
nixos/tpm2: init This commit adds udev rules, the userspace resource manager and PKCS#11 module support.
2019-10-26 15:22:40 +00:00
./security/tpm2.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./security/wrappers/default.nix
nixos/docuum: add module for docuum package Co-Authored-By: Martin Weinelt <mweinelt@users.noreply.github.com>
2024-03-23 17:25:55 +00:00
./services/admin/docuum.nix
nixos/meshcentral: init module
2021-07-21 16:03:57 +00:00
./services/admin/meshcentral.nix
nixos/oxidized: add module
2018-04-19 10:23:00 +00:00
./services/admin/oxidized.nix
nixos/pgadmin: init
2022-02-23 13:37:29 +00:00
./services/admin/pgadmin.nix
Add salt master module (#25632) * salt: 2016.11.2 -> 2016.11.4 * salt: Add master NixOS module
2017-05-09 17:20:35 +00:00
./services/admin/salt/master.nix
salt: Add minion service module
2017-01-13 20:00:49 +00:00
./services/admin/salt/minion.nix
Add ActiveMQ service
2013-02-25 15:50:10 +00:00
./services/amqp/activemq/default.nix
* Added a module for the RabbitMQ server. svn path=/nixos/trunk/; revision=26630
2011-03-31 17:04:05 +00:00
./services/amqp/rabbitmq.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/audio/alsa.nix
nixos/botamusique: init
2021-05-03 21:27:19 +00:00
./services/audio/botamusique.nix
gmrender-resurrect: Add gmediarender service This creates a systemd unit that will start and supervise the gmediarender daemon.
2023-01-12 15:46:04 +00:00
./services/audio/gmediarender.nix
nixos/gonic: init
2022-12-21 00:08:48 +00:00
./services/audio/gonic.nix
goxlr-utility: init module
2023-08-18 14:28:28 +00:00
./services/audio/goxlr-utility.nix
nixos/hqplayerd: init
2021-06-13 22:59:13 +00:00
./services/audio/hqplayerd.nix
Added icecast module.
2015-03-16 14:10:16 +00:00
./services/audio/icecast.nix
nixos/hqplayerd: init
2021-06-13 22:59:13 +00:00
./services/audio/jack.nix
nixos/jmusicbot: init
2021-03-27 22:33:22 +00:00
./services/audio/jmusicbot.nix
initial liquidsoap service expression
2014-11-20 22:30:24 +00:00
./services/audio/liquidsoap.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/audio/mopidy.nix
Add mpd module There is room for improvement here. The options in conffile could be broken out into individual options and an extraConfig option added. But I think this looks right. Patch by mornfall, slightly modified by me svn path=/nixos/trunk/; revision=30731
2011-12-05 01:51:05 +00:00
./services/audio/mpd.nix
nixos/mpdscribble: init
2020-09-09 15:19:16 +00:00
./services/audio/mpdscribble.nix
nixos/mympd: init
2023-12-18 21:31:17 +00:00
./services/audio/mympd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/audio/navidrome.nix
nixos/networkaudiod: init
2021-08-03 08:36:53 +00:00
./services/audio/networkaudiod.nix
nixos/roon-bridge: register module in module-list
2021-08-03 07:22:32 +00:00
./services/audio/roon-bridge.nix
roon-server: init at 100600401
2019-06-21 18:58:20 +00:00
./services/audio/roon-server.nix
Add slimserver nixos module
2017-03-16 19:42:49 +00:00
./services/audio/slimserver.nix
nixos/snapserver: init A nixos module for configuring the server side of pkgs.snapcast. The module is named "snapserver" following upstream convention. This commit does not provide module for the corresponding client. Fix handling of port and controlPort Fix stream uri generation & address review Remove unused streams options & add description Add missing description & Remove default fs path Use types.port for ports & formatting improvements Force mpd and mopidy to wait for snapserver
2019-02-17 10:08:48 +00:00
./services/audio/snapserver.nix
nixos/spotifyd: init
2019-07-19 20:13:06 +00:00
./services/audio/spotifyd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/audio/squeezelite.nix
nixos/tts: init Provide a module to configure Coqui TTS, available as `tts` in nixpkgs for a few releases already. The module supports multiple servers in parallel, so multiple languages and testing scenarios can be covered, without affecting any production usage.
2023-01-28 21:25:26 +00:00
./services/audio/tts.nix
ympd service: init (#18371) ympd provides a web ui, it is suitable to be run as a service. Fixes #17878. service has no requirements b/c user might be using remote mpd instance.
2016-09-10 16:23:39 +00:00
./services/audio/ympd.nix
automysqlinit: init at 3.0_rc6
2019-04-12 23:06:11 +00:00
./services/backup/automysqlbackup.nix
Add bacula service
2013-03-15 15:10:21 +00:00
./services/backup/bacula.nix
nixos/borgbackup: init
2018-03-12 19:20:24 +00:00
./services/backup/borgbackup.nix
borgmatic: init at 1.5.12
2021-02-17 04:49:52 +00:00
./services/backup/borgmatic.nix
nixos/btrbk: add module and test
2021-05-30 12:00:00 +00:00
./services/backup/btrbk.nix
duplicati: create service
2018-04-07 19:23:04 +00:00
./services/backup/duplicati.nix
nixos/duplicity: init Add a simple module that wrap duplicity in a systemd service.
2019-01-05 12:55:01 +00:00
./services/backup/duplicity.nix
added nixos modules to perform simple backup scheduling for directories, postgresql and mysql database dumps svn path=/nixos/trunk/; revision=17690
2009-10-07 11:55:36 +00:00
./services/backup/mysql-backup.nix
./services/backup/postgresql-backup.nix
nixos/postgresql-wal-receiver: add module (#63799)
2019-08-11 17:09:42 +00:00
./services/backup/postgresql-wal-receiver.nix
nixos/snapraid: remove from top-level I don't use this tool but saw it in the top level and that's not where it should live. This could arguably also be seen as a RAID; it's a bit of an in-between.
2023-11-26 09:23:18 +00:00
./services/backup/snapraid.nix
restic-rest-server module: init
2018-05-03 19:30:06 +00:00
./services/backup/restic-rest-server.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/backup/restic.nix
add simple rsnapshot module
2013-10-06 20:22:25 +00:00
./services/backup/rsnapshot.nix
nixos/sanoid, nixos/syncoid: init module and test
2019-10-27 03:37:30 +00:00
./services/backup/sanoid.nix
./services/backup/syncoid.nix
nixos: add Tarsnap backup service module Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-02-24 04:10:14 +00:00
./services/backup/tarsnap.nix
nixos/backup/tsm: init module Based on the programs/tsm-client module, this commit introduces a systemd service that uses the tsm-client to create regular backups of the machine.
2019-05-15 16:17:30 +00:00
./services/backup/tsm.nix
nixos/zfs: add autoReplication to module list
2019-10-28 05:03:21 +00:00
./services/backup/zfs-replication.nix
znapzend service: init at 0.15.3
2016-03-24 09:52:13 +00:00
./services/backup/znapzend.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/backup/zrepl.nix
erigon: init module
2022-11-05 04:16:56 +00:00
./services/blockchain/ethereum/erigon.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/blockchain/ethereum/geth.nix
lighthouse: init module
2022-11-07 12:36:28 +00:00
./services/blockchain/ethereum/lighthouse.nix
nixos: init corosync, pacemaker modules
2022-03-02 21:38:42 +00:00
./services/cluster/corosync/default.nix
nixos/hadoop: add hadoop module (hdfs, yarn)
2018-05-21 01:09:31 +00:00
./services/cluster/hadoop/default.nix
nixos/k3s: add initial k3s service * nixos/k3s: simplify config expression * nixos/k3s: add config assertions and trim unneeded bits * nixos/k3s: add a test that k3s works; minor module improvements This is a single-node test. Eventually we should also have a multi-node test to verify the agent bit works, but that one's more involved. * nixos/k3s: add option description * nixos/k3s: add defaults for token/serveraddr Now that the assertion enforces their presence, we dont' need to use the typesystem for it. * nixos/k3s: remove unneeded sudo in test * nixos/k3s: add to test list
2020-04-17 14:39:54 +00:00
./services/cluster/k3s/default.nix
nixos/kubernetes: major module refactor - All kubernetes components have been seperated into different files - All TLS-enabled ports have been deprecated and disabled by default - EasyCert option added to support automatic cluster PKI-bootstrap - RBAC has been enforced for all cluster components by default - NixOS kubernetes test cases make use of easyCerts to setup PKI
2018-07-22 11:14:20 +00:00
./services/cluster/kubernetes/addon-manager.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/cluster/kubernetes/addons/dns.nix
nixos/kubernetes: major module refactor - All kubernetes components have been seperated into different files - All TLS-enabled ports have been deprecated and disabled by default - EasyCert option added to support automatic cluster PKI-bootstrap - RBAC has been enforced for all cluster components by default - NixOS kubernetes test cases make use of easyCerts to setup PKI
2018-07-22 11:14:20 +00:00
./services/cluster/kubernetes/apiserver.nix
./services/cluster/kubernetes/controller-manager.nix
kubernetes: update service
2017-04-26 20:44:38 +00:00
./services/cluster/kubernetes/default.nix
nixos/kubernetes: major module refactor - All kubernetes components have been seperated into different files - All TLS-enabled ports have been deprecated and disabled by default - EasyCert option added to support automatic cluster PKI-bootstrap - RBAC has been enforced for all cluster components by default - NixOS kubernetes test cases make use of easyCerts to setup PKI
2018-07-22 11:14:20 +00:00
./services/cluster/kubernetes/flannel.nix
./services/cluster/kubernetes/kubelet.nix
./services/cluster/kubernetes/pki.nix
./services/cluster/kubernetes/proxy.nix
./services/cluster/kubernetes/scheduler.nix
nixos: init corosync, pacemaker modules
2022-03-02 21:38:42 +00:00
./services/cluster/pacemaker/default.nix
nixos/patroni: init
2022-08-08 12:25:30 +00:00
./services/cluster/patroni/default.nix
nixos/spark: init module
2021-09-17 15:20:11 +00:00
./services/cluster/spark/default.nix
boinc service: add to module list The module itself was added in 811c39c6a4156af42558f95945add2795083d1a7, but it looks like I forgot to reference it to module-list.nix.
2016-12-07 10:46:06 +00:00
./services/computing/boinc/client.nix
folding@home: 6.02 -> 7.5.1 The v7 series is very different. This commit introduces the 3 packages: fahclient, fahcontrol and fahviewer. It also rebuilds the NixOS module to map better with the new client.
2020-03-09 22:07:37 +00:00
./services/computing/foldingathome/client.nix
slurm: add pkg
2015-02-28 17:11:13 +00:00
./services/computing/slurm/slurm.nix
folding@home: 6.02 -> 7.5.1 The v7 series is very different. This commit introduces the 3 packages: fahclient, fahcontrol and fahviewer. It also rebuilds the NixOS module to map better with the new client.
2020-03-09 22:07:37 +00:00
./services/computing/torque/mom.nix
./services/computing/torque/server.nix
buildbot: 0.9.0rc4 -> 0.9.0.post1 - updates buildbot to version 9 release - adds nixos configuration module - fixes buildbot-www package deps - re-hardcode path to tail - builbot configuration via module vars fixes #19759
2016-10-21 21:04:48 +00:00
./services/continuous-integration/buildbot/master.nix
buildbot: 0.9.0.post1 -> 0.9.3 - Fixes unneeded patching - Adds worker to build inputs now needed for tests - Replaces enableworker option with worker configuration module - Openssh required for tests - Fixes worker hardcoded paths - Tested on Nixos Unstable
2017-01-30 17:44:14 +00:00
./services/continuous-integration/buildbot/worker.nix
nixos/buildkite-agents: support multiple buildkite agents
2020-01-23 16:19:53 +00:00
./services/continuous-integration/buildkite-agents.nix
nixos/gitea-actions-runner: init
2023-04-24 15:04:50 +00:00
./services/continuous-integration/gitea-actions-runner.nix
github-runner: configurable user, environment, service overrides + multiple runners
2022-09-12 19:41:54 +00:00
./services/continuous-integration/github-runners.nix
gitlab-runner service: initial version
2016-09-17 11:08:18 +00:00
./services/continuous-integration/gitlab-runner.nix
Add gocd agent and server service packages (#16273) GoCD is an open source continuous delivery server specializing in advanced workflow modeling and visualization. Update maintainers list to include swarren83. Update module list to include gocd agent and server module. Update packages list to include gocd agent and server package. Update version, revision and checksum for GoCD release 16.5.0.
2016-07-22 22:29:18 +00:00
./services/continuous-integration/gocd-agent/default.nix
./services/continuous-integration/gocd-server/default.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/continuous-integration/hercules-ci-agent/default.nix
./services/continuous-integration/hydra/default.nix
Add jenkins continuous integration server and user. By default the jenkins server is executed under the user "jenkins". Which can be configured using users.jenkins.* options. If a different user is requested by changing services.jenkins.user then none of the users.jenkins options apply. This patch does not include jenkins slave configuration. Some config options will probably change when this is implemented. Aspects like the user and environment are typically identical between slave and master. The service configs are different. The design is for users.jenkins to cover the shared aspects while services.jenkins and services.jenkins-slave cover the master and slave specific aspects, respectively. Another option would be to place everything under services.jenkins and have a config that selects master vs slave.
2014-02-10 20:07:12 +00:00
./services/continuous-integration/jenkins/default.nix
nixos: add services.jenkins.jobBuilder option This option allows to define (declarative) Jenkins jobs, using Jenkins Job Builder (JJB) as backend. Example: services.jenkins = { enable = true; jobBuilder = { enable = true; yamlJobs = '' - job: name: jenkins-job-test builders: - shell: echo 'Hello world!' ''; }; }; Jobs can be defined using YAML, JSON and Nix. Note that it really is declarative configuration; if you remove a previously defined job, the module will remove the jobdir under $JENKINS_HOME. Jobs managed through the Jenkins WebUI (or by other means) are not touched by this module. Changes v1 -> v2: * add nixJobs * let jsonJobs take a list of strings (allows merge) * 4 space indent in shell code
2015-10-08 20:15:15 +00:00
./services/continuous-integration/jenkins/job-builder.nix
buildkite-agent: init at 2.1.8 * nixos module included * install compiled binary * only one platform now * limited config options * relies on providing ssh keys for agent
2016-03-10 15:00:09 +00:00
./services/continuous-integration/jenkins/slave.nix
nixos/woodpecker: refactor to multi-agents setup The module file has been renamed from `agent.nix` to `agents.nix` to mirror the change.
2023-03-18 17:05:05 +00:00
./services/continuous-integration/woodpecker/agents.nix
nixos/woodpecker: init
2023-03-14 18:33:25 +00:00
./services/continuous-integration/woodpecker/server.nix
aerospike: init at 4.2.0.4 Co-authored-by: Volth <volth@webmaster.ms>
2018-07-16 00:40:53 +00:00
./services/databases/aerospike.nix
cassandra: rewrote service from scratch Adds a replacement for the previously broken `services.database.cassandra` with tests for a multi-node setup.
2017-11-07 13:11:56 +00:00
./services/databases/cassandra.nix
clickhouse: init at 1.1.54190
2017-03-27 01:06:23 +00:00
./services/databases/clickhouse.nix
nixos/cockroachdb: create new service This also includes a full end-to-end CockroachDB clustering test to ensure everything basically works. However, this test is not currently enabled by default, though it can be run manually. See the included comments in the test for more information. Closes #51306. Closes #38665. Co-authored-by: Austin Seipp <aseipp@pobox.com> Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-04-10 01:16:33 +00:00
./services/databases/cockroachdb.nix
update couchdb to 1.5.0(current latest) and add service for it
2014-01-17 00:30:16 +00:00
./services/databases/couchdb.nix
dgraph: add module
2022-06-27 16:50:14 +00:00
./services/databases/dgraph.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/databases/dragonflydb.nix
nixos/etcd: fix etcd category from misc to databases
2024-01-16 23:31:49 +00:00
./services/databases/etcd.nix
nixos/ferretdb: init
2023-10-15 08:36:04 +00:00
./services/databases/ferretdb.nix
firebird service many suggestions contributed by bjornfor and edolstra
2013-10-05 21:07:22 +00:00
./services/databases/firebird.nix
nixos: add foundationdb module, documentation Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-04-23 06:02:31 +00:00
./services/databases/foundationdb.nix
nixos/hbase-standalone: add mkRenamedOptionModule and rename file
2022-08-07 18:32:56 +00:00
./services/databases/hbase-standalone.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/databases/influxdb.nix
nixos/influxdb2: init
2021-07-26 04:34:42 +00:00
./services/databases/influxdb2.nix
nixos/lldap: init Co-authored-by: LongerHV <46924944+LongerHV@users.noreply.github.com>
2023-04-27 13:26:57 +00:00
./services/databases/lldap.nix
memcached: Add NixOS support
2013-06-10 20:45:24 +00:00
./services/databases/memcached.nix
nixos/monetdb: init (#39812)
2018-05-01 14:44:12 +00:00
./services/databases/monetdb.nix
mongodb nixos module svn path=/nixos/trunk/; revision=31658
2012-01-18 20:34:07 +00:00
./services/databases/mongodb.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/databases/mysql.nix
i2pd: added package, service
2014-11-09 08:44:47 +00:00
./services/databases/neo4j.nix
Adding a poor openldap server module. svn path=/nixos/trunk/; revision=26822
2011-04-13 17:35:19 +00:00
./services/databases/openldap.nix
opentsdb: New package and NixOS module
2014-11-20 12:00:53 +00:00
./services/databases/opentsdb.nix
nixos/pgbouncer: init (#241578) Co-authored-by: Marek Mahut <marek.mahut@gmail.com>
2023-07-22 10:49:23 +00:00
./services/databases/pgbouncer.nix
postage: replaced by pgmanage-10.0.2 postage is no longer maintained and has been replaced by the identical pgmanage. See: https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage The following error is raised when a user enables the deprecated `services.postage.enable` option: Failed assertions: - services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
2017-11-02 19:35:05 +00:00
./services/databases/pgmanage.nix
* Move ircd-hybrid stuff from the services tree to the nixos tree. svn path=/nixos/trunk/; revision=27009
2011-04-27 16:27:05 +00:00
./services/databases/postgresql.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/databases/redis.nix
surrealdb: module init
2022-11-19 23:33:18 +00:00
./services/databases/surrealdb.nix
nixos/tigerbeetle: init module
2024-01-08 04:45:21 +00:00
./services/databases/tigerbeetle.nix
victoriametrics: add module, tests
2020-01-19 17:55:56 +00:00
./services/databases/victoriametrics.nix
accountsservice: be consistent in naming (always two 's') The package is (correctly) named 'accountsservice' (with two 's'), but the attribute and expression path lacked one 's'. Fix it.
2014-06-22 19:03:19 +00:00
./services/desktops/accountsservice.nix
nixos/ayatana-indicators: init module
2023-10-19 18:26:53 +00:00
./services/desktops/ayatana-indicators.nix
nixos/bamf: init
2018-07-07 16:49:39 +00:00
./services/desktops/bamf.nix
blueman: add module for new systemd services
2019-09-03 08:26:37 +00:00
./services/desktops/blueman.nix
cpupower-gui: init at 1.0.0
2020-10-09 22:08:05 +00:00
./services/desktops/cpupower-gui.nix
nixos/deepin/dde-api: init
2023-04-24 06:49:22 +00:00
./services/desktops/deepin/dde-api.nix
nixos/deepin/app-services: init
2023-04-24 07:06:11 +00:00
./services/desktops/deepin/app-services.nix
nixos/deepin/dde-daemon: init
2023-04-24 06:38:27 +00:00
./services/desktops/deepin/dde-daemon.nix
dleyna-renderer: init at 0.6.0
2017-08-30 22:24:13 +00:00
./services/desktops/dleyna-renderer.nix
dleyna-server: init at 0.6.0
2017-09-01 13:04:59 +00:00
./services/desktops/dleyna-server.nix
nixos/espanso: init module (#93483) nixos/espanso: init module
2020-08-25 00:37:33 +00:00
./services/desktops/espanso.nix
nixos/flatpak: init
2017-12-31 04:10:15 +00:00
./services/desktops/flatpak.nix
geoclue2: add dbus service
2014-04-24 21:32:32 +00:00
./services/desktops/geoclue2.nix
gnome: rename from gnome3 Since GNOME version is now 40, it no longer makes sense to use the old attribute name.
2021-05-07 21:18:14 +00:00
./services/desktops/gnome/at-spi2-core.nix
./services/desktops/gnome/evolution-data-server.nix
./services/desktops/gnome/glib-networking.nix
gnome-browser-connector: 10.1 → 42.0 https://discourse.gnome.org/t/split-and-rename-of-chrome-gnome-shell/11075 https://gitlab.gnome.org/nE0sIghT/gnome-browser-connector/-/compare/815ec9e1afa52bd3af5047e176a4ea9c1bfa2514...v42.0 - Renamed and split into a separate repo from the extensions. - CMake build replaced with Meson (jq also not needed) - requests Python module not needed since updates are now solely handled by GNOME Shell itself Also - Corrected license - Cleaned up the module - Replaced PYTHONPATH in a wrapper by Python environment Changelog-Reviewed-By: Jan Tojnar <jtojnar@gmail.com>
2022-07-26 22:23:44 +00:00
./services/desktops/gnome/gnome-browser-connector.nix
gnome: rename from gnome3 Since GNOME version is now 40, it no longer makes sense to use the old attribute name.
2021-05-07 21:18:14 +00:00
./services/desktops/gnome/gnome-initial-setup.nix
./services/desktops/gnome/gnome-keyring.nix
./services/desktops/gnome/gnome-online-accounts.nix
./services/desktops/gnome/gnome-online-miners.nix
./services/desktops/gnome/gnome-remote-desktop.nix
./services/desktops/gnome/gnome-settings-daemon.nix
./services/desktops/gnome/gnome-user-share.nix
./services/desktops/gnome/rygel.nix
./services/desktops/gnome/sushi.nix
./services/desktops/gnome/tracker-miners.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/desktops/gnome/tracker.nix
./services/desktops/gsignond.nix
./services/desktops/gvfs.nix
./services/desktops/malcontent.nix
nixos/neard: init
2019-11-23 21:34:57 +00:00
./services/desktops/neard.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/desktops/pipewire/pipewire.nix
./services/desktops/pipewire/wireplumber.nix
Add the Profile Sync Daemon Package & NixOS Module
2014-12-11 21:12:29 +00:00
./services/desktops/profile-sync-daemon.nix
nixos/seatd: init
2023-08-24 13:52:59 +00:00
./services/desktops/seatd.nix
nixos/system-config-printer: init
2019-08-27 19:39:48 +00:00
./services/desktops/system-config-printer.nix
system76-scheduler: add config module
2023-04-29 10:32:44 +00:00
./services/desktops/system76-scheduler.nix
telepathy-mission-control: add dbus service, enabled by default on gnome3
2014-04-08 13:02:15 +00:00
./services/desktops/telepathy.nix
pantheon: init a 5.0
2018-08-20 20:31:18 +00:00
./services/desktops/tumbler.nix
nixos/zeitgeist: init
2018-08-15 23:05:30 +00:00
./services/desktops/zeitgeist.nix
nixos/athens: init at 0.12.1 Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
2023-11-04 01:46:35 +00:00
./services/development/athens.nix
nixos/blackfire: init
2020-10-03 23:49:09 +00:00
./services/development/blackfire.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/development/bloop.nix
nixos/distccd: init Closes: #42604
2021-08-22 04:59:17 +00:00
./services/development/distccd.nix
nixos/gemstash: init module
2022-08-11 10:10:58 +00:00
./services/development/gemstash.nix
hoogle service: init
2016-04-12 20:31:47 +00:00
./services/development/hoogle.nix
nixos/jupyter: init service
2018-01-11 23:13:55 +00:00
./services/development/jupyter/default.nix
nixos/jupyterhub: init service
2020-08-06 11:52:12 +00:00
./services/development/jupyterhub/default.nix
livebook: add systemd user service, test, and docs Co-authored-by: Yt <happysalada@tuta.io>
2023-10-24 16:53:12 +00:00
./services/development/livebook.nix
lorri service module: init
2019-11-08 17:18:03 +00:00
./services/development/lorri.nix
nixseparatedebuginfod: add module and nixos test
2023-11-29 12:00:00 +00:00
./services/development/nixseparatedebuginfod.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/development/rstudio-server/default.nix
zammad: init module Co-authored-by: garbas <rok@garbas.si>
2022-01-26 12:01:47 +00:00
./services/development/zammad.nix
nixos/display-managers: extract generic display-manager bits Some settings which where before inside the xserver module, are generic and also required for SDDM under wayland. To make them easily re-usable lets extract them.
2024-02-27 09:06:13 +00:00
./services/display-managers/default.nix
nixos/greetd: Add greetd module (#118294) * nixos/greetd: Add greetd module * nixos/greetd: Configure 'greeter'-user * nixos/greetd: Add default for restart-option Co-authored-by: Jens Nolte <git@queezle.net>
2021-04-06 19:35:32 +00:00
./services/display-managers/greetd.nix
nixos/sddm: move option from services.xserver.displayManager.sddm to services.displayManager.sddm Because it is not just X anymore
2024-02-27 08:57:54 +00:00
./services/display-managers/sddm.nix
Add a module for Emacs daemon
2016-06-20 04:45:27 +00:00
./services/editors/emacs.nix
nixos/haste-server: add
2022-03-02 16:59:59 +00:00
./services/editors/haste.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/editors/infinoted.nix
nixos/odoo: init
2021-11-02 00:45:19 +00:00
./services/finance/odoo.nix
nixos/archisteamfarm: don't use asf abbreviation for more clarity
2023-12-04 21:05:25 +00:00
./services/games/archisteamfarm.nix
nixos/armagetronad: add module with tests
2023-11-25 21:06:11 +00:00
./services/games/armagetronad.nix
nixos/crossfire-server: add settings module for Crossfire MMORPG server
2019-08-08 22:19:55 +00:00
./services/games/crossfire-server.nix
nixos/deliantra-server: add settings module for Deliantra MMORPG server
2019-08-04 03:00:31 +00:00
./services/games/deliantra-server.nix
factorio: headless server module
2016-04-12 04:17:05 +00:00
./services/games/factorio.nix
nixos/freeciv: init
2020-11-17 06:44:28 +00:00
./services/games/freeciv.nix
nixos/mchprs: init module Co-authored-by: Ryan Lahfa <masterancpp@gmail.com>
2023-07-02 23:59:59 +00:00
./services/games/mchprs.nix
nixos: add minecraft-server service Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-03-29 09:48:33 +00:00
./services/games/minecraft-server.nix
Adds minetest server service
2015-04-04 10:36:43 +00:00
./services/games/minetest-server.nix
openarena: add module for dedicated server
2019-10-21 23:23:30 +00:00
./services/games/openarena.nix
nixos/quake3-server: Init
2021-02-04 19:20:58 +00:00
./services/games/quake3-server.nix
nixos/{modules,tests}/teeworlds: init add module and test
2020-03-29 18:50:14 +00:00
./services/games/teeworlds.nix
Add Terraria server service (#16832)
2016-08-07 01:58:38 +00:00
./services/games/terraria.nix
nixos/xonotic: init
2023-09-17 07:13:07 +00:00
./services/games/xonotic.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/hardware/acpid.nix
nixos: add actkbd module and sound.enableMediaKeys option
2015-04-15 17:48:38 +00:00
./services/hardware/actkbd.nix
nixos/argonone: init
2022-04-08 18:00:27 +00:00
./services/hardware/argonone.nix
nixos/asusctl: init
2022-09-16 17:23:46 +00:00
./services/hardware/asusd.nix
nixos/auto-cpufreq: init module
2021-01-08 20:57:48 +00:00
./services/hardware/auto-cpufreq.nix
nixos/auto-epp: init
2023-11-29 06:28:25 +00:00
./services/hardware/auto-epp.nix
* Include the Bluetooth module in module-list.nix. svn path=/nixos/trunk/; revision=23486
2010-08-27 15:32:49 +00:00
./services/hardware/bluetooth.nix
nixos/bolt: init at 0.7
2019-02-19 13:56:42 +00:00
./services/hardware/bolt.nix
Added BRLTTY package
2015-04-29 21:02:09 +00:00
./services/hardware/brltty.nix
nixos/ddccontrol: init
2021-07-08 19:37:08 +00:00
./services/hardware/ddccontrol.nix
fancontrol service init
2019-09-25 02:23:59 +00:00
./services/hardware/fancontrol.nix
Add freefall NixOS service module
2015-01-08 22:38:10 +00:00
./services/hardware/freefall.nix
nixos/services.fwupd: init
2017-10-09 13:35:52 +00:00
./services/hardware/fwupd.nix
handheld-daemon: init at 0.2.7
2024-01-02 00:18:45 +00:00
./services/hardware/handheld-daemon.nix
nixos/hddfancontrol: initial module & test
2023-06-25 16:35:47 +00:00
./services/hardware/hddfancontrol.nix
illum: init at 0.4
2017-01-25 16:25:36 +00:00
./services/hardware/illum.nix
interception-tools: init at 0.1.1 The latest release of libyamlcpp in nixpkgs does not build because it uses an older version of boost than the one in nixpkgs and therefore expects a particular header file which does not exist in the latest boost anymore. For this reason, a later (git) version of libyamlcpp is used here (which actually doesn't even require boost). The substituteInPlace in the prePatch phase is needed because libevdev places its headers in non-standard places, meaning Nix cannot normally find them. The `cut` command removes the first two "-I" characters from the output of `pkg-config`. This needs to be in the prePatch phase because otherwise Nix will patch these lines to `/var/empty`, meaning you would have less specific replacement (in case other lines are also patched to `/var/empty`). I wrote the patch. (I believe it is NixOS specific.)
2017-09-02 06:17:53 +00:00
./services/hardware/interception-tools.nix
nixos/iptsd: init
2023-10-15 01:48:31 +00:00
./services/hardware/iptsd.nix
irqbalance: init at 1.1.0
2016-01-03 17:05:18 +00:00
./services/hardware/irqbalance.nix
nixos/joycond: init NixOS should be able to support the Nintendo Switch Pro controller for steam and non-steam at the same time. Currently there are two mutually exclusive ways to support the Pro Controller: Steam and `hid-nintendo`. Unfortunately these don't work together, but there's a workaround in newer versions of `joycond` (described [here](https://wiki.archlinux.org/title/Gamepad#Using_hid-nintendo_pro_controller_with_Steam_Games_(with_joycond))). To use this workaround `hid-nintendo` and `joycond` need to be updated, and the systemd and udev configuration needs to be made available in NixOS.
2021-09-26 04:17:21 +00:00
./services/hardware/joycond.nix
nixos/kanata: init
2022-07-24 15:49:20 +00:00
./services/hardware/kanata.nix
nixos lcdproc: module for lcdd/lcdproc
2018-03-19 04:38:17 +00:00
./services/hardware/lcd.nix
initial NixOS module for LIRC
2017-11-25 21:41:19 +00:00
./services/hardware/lirc.nix
services/hardware: add nvidia-container-toolkit
2024-01-28 12:00:32 +00:00
./services/hardware/nvidia-container-toolkit-cdi-generator
nixos/monado: init Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
2023-07-23 09:36:49 +00:00
./services/hardware/monado.nix
nixos support for nvidia optimus currently, only support for fully disabling nvidia is provided, which is helpful for saving power/heat. In the future, this should be extended so we can choose: - nvidia only (choose between nouveau/nvidia driver) - IGP only - Hybrid (choose between nouveau/nvidia driver, use the "bumblebee" package/daemon) svn path=/nixos/trunk/; revision=32085
2012-02-06 19:14:42 +00:00
./services/hardware/nvidia-optimus.nix
nixos/openrgb: init module
2021-12-30 19:55:51 +00:00
./services/hardware/openrgb.nix
Adding the pcscd daemon (this daemon manages smartcard reader drivers), and offers a common interface to programs dealing with smartcards (like users of the opensc lib). svn path=/nixos/trunk/; revision=19360
2010-01-11 21:56:01 +00:00
./services/hardware/pcscd.nix
Add a module for the pommed tool for Apple laptop keyboards. svn path=/nixos/trunk/; revision=33286
2012-03-20 04:41:13 +00:00
./services/hardware/pommed.nix
power-profiles-daemon: init at 0.1, add service module
2020-09-14 10:49:42 +00:00
./services/hardware/power-profiles-daemon.nix
nixos/rasdaemon: init module
2021-10-08 08:36:43 +00:00
./services/hardware/rasdaemon.nix
libratbag: init at v0.9.903 Add package libratbag and service module ratbagd Libratbag contains ratbagd daemon and ratbagctl cli to configure buttons, dpi, leds, etc. of gaming mice. Add mvnetbiz to maintainers.
2018-09-21 09:13:49 +00:00
./services/hardware/ratbagd.nix
Apply mornfall's SANE patches Fix sane-backends to generate udev rules, add a snapshot of sane-backends's unstable repo, and add a SANE nixos module svn path=/nixos/trunk/; revision=30764
2011-12-05 17:32:45 +00:00
./services/hardware/sane.nix
brscan4 module: Added to `modules-list.nix`. As requested by multiples users in #20632.
2018-02-21 00:32:16 +00:00
./services/hardware/sane_extra_backends/brscan4.nix
brscan5: init at 1.2.6-0
2021-05-21 17:59:30 +00:00
./services/hardware/sane_extra_backends/brscan5.nix
dsseries: init at 1.0.5-1
2019-03-08 14:58:32 +00:00
./services/hardware/sane_extra_backends/dsseries.nix
nixos/spacenavd: init
2019-12-18 11:32:35 +00:00
./services/hardware/spacenavd.nix
nixos/supergfxctl: init
2022-09-16 17:23:46 +00:00
./services/hardware/supergfxd.nix
Added TCSD (Trusted Computing Group Software Stack (TSS) daemon). Start tcsd after systemd-udev-settle and run it in foreground.
2013-08-21 15:44:29 +00:00
./services/hardware/tcsd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/hardware/thermald.nix
Added TCSD (Trusted Computing Group Software Stack (TSS) daemon). Start tcsd after systemd-udev-settle and run it in foreground.
2013-08-21 15:44:29 +00:00
./services/hardware/thinkfan.nix
nixos: add throttled service
2019-05-26 22:31:55 +00:00
./services/hardware/throttled.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/hardware/tlp.nix
trezord: init at 1.2.0 (#22054)
2017-02-08 16:18:22 +00:00
./services/hardware/trezord.nix
nixos/triggerhappy: init
2018-08-16 09:00:29 +00:00
./services/hardware/triggerhappy.nix
nixos/tuxedo-rs: init at 0.2.2
2023-09-26 21:27:22 +00:00
./services/hardware/tuxedo-rs.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/hardware/udev.nix
udisks2: add udisks2 service Udisks2 is a Dbus service started by systemd on demand.
2013-04-04 07:50:16 +00:00
./services/hardware/udisks2.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/hardware/undervolt.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/hardware/upower.nix
usbmuxd service: init
2017-10-17 16:55:57 +00:00
./services/hardware/usbmuxd.nix
usbrelay: init at 0.9
2022-03-29 21:54:42 +00:00
./services/hardware/usbrelayd.nix
vdr: initial at 2.4.0 and nixos module used same plugin mechanism as kodi does
2018-12-08 09:18:26 +00:00
./services/hardware/vdr.nix
keyd: add keyd service and test The keyd package already exists, but without a systemd service. Keyd requires write access to /var/run to create its socket. Currently the directory it uses can be changed with an environment variable, but the keyd repo state suggests that this may turn into a compile-time option. with that set, and some supplementary groups added, we can run the service under DynamicUser. Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
2023-03-15 13:15:38 +00:00
./services/hardware/keyd.nix
ebusd: new module
2023-07-20 17:43:04 +00:00
./services/home-automation/ebusd.nix
nixos/esphome: init module
2023-03-22 21:48:59 +00:00
./services/home-automation/esphome.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/home-automation/evcc.nix
nixos/govee2mqtt: init
2024-01-21 23:43:45 +00:00
./services/home-automation/govee2mqtt.nix
nixos/home-assistant: move module into home-automation category Putting so many things into misc is not great, so let's open up a new category called home-automation here and now.
2022-01-28 21:54:19 +00:00
./services/home-automation/home-assistant.nix
matter-server: add nixos service module New module to run the python-matter-server executable as a sandboxed system service.
2023-10-29 03:16:44 +00:00
./services/home-automation/matter-server.nix
nixos/wyoming: move into home-automation category
2024-03-29 02:02:33 +00:00
./services/home-automation/wyoming/faster-whisper.nix
./services/home-automation/wyoming/openwakeword.nix
./services/home-automation/wyoming/piper.nix
nixos/wyoming/satellite: init
2024-03-22 04:19:14 +00:00
./services/home-automation/wyoming/satellite.nix
nixos/zigbee2mqtt: move into home-automation category
2022-03-01 18:19:31 +00:00
./services/home-automation/zigbee2mqtt.nix
zwave-js: module init, zwave-js-server: init at 1.33.0 Co-authored-by: Martin Weinelt <mweinelt@users.noreply.github.com> Co-authored-by: h7x4 <h7x4@nani.wtf>
2023-05-13 21:42:00 +00:00
./services/home-automation/zwave-js.nix
heartbeat service: init
2017-07-01 16:57:18 +00:00
./services/logging/SystemdJournal2Gelf.nix
awstats: init at 7.4, including a simple service
2016-03-09 18:50:58 +00:00
./services/logging/awstats.nix
elk7: 7.11.1 -> 7.16.1, 6.8.3 -> 6.8.21 + add filebeat module and tests (#150879) * elk7: 7.11.1 -> 7.16.1 * nixosTests.elk: Improve reliability and compatibility with ELK 7.x - Use comparisons in jq instead of grepping - Match for `.hits.total.value` if version >= 7, otherwise it always passes - Make curl fail if requests fails * nixos/filebeat: Add initial module and test Filebeat is an open source file harvester, mostly used to fetch logs files and feed them into logstash. This module can be used instead of journalbeat if used with `filebeat7` and configured with the `journald` input. * python3Packages.parsedmarc.tests: Fix breakage - Don't use the deprecated elasticsearch7-oss package - Improve jq query robustness and add tracing * rl-2205: Note the addition of the filebeat service * elk6: 6.8.3 -> 6.8.21 The latest version includes a fix for CVE-2021-44228. * nixos/journalbeat: Add a loose dependency on elasticsearch Avoid unnecssary back-off when elasticsearch is running on the same host.
2021-12-16 15:20:52 +00:00
./services/logging/filebeat.nix
Add fluentd package and module
2015-03-18 19:33:52 +00:00
./services/logging/fluentd.nix
graylog service: Initial graylog service
2016-03-30 18:49:16 +00:00
./services/logging/graylog.nix
heartbeat service: init
2017-07-01 16:57:18 +00:00
./services/logging/heartbeat.nix
journalbeat service: init at 5.1.2 Journalbeat is a log shipper from systemd/journald to Logstash/Elasticsearch. I added a package as well as a NixOS service module for it.
2017-01-03 13:12:36 +00:00
./services/logging/journalbeat.nix
nixos/journaldriver: import module in top-level module list Imports the `journaldriver` module into the top-level NixOS module list to make it usable without extra work. This went unnoticed in #42134 (mostly because my setup imports modules explicitly from pinned versions). Fixes #50390
2018-11-15 09:57:22 +00:00
./services/logging/journaldriver.nix
journalwatch & journalwatch service: init at 1.1.0
2017-06-18 23:18:56 +00:00
./services/logging/journalwatch.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/logging/klogd.nix
add logcheck module
2012-08-25 09:11:37 +00:00
./services/logging/logcheck.nix
Adding logrotate to nixos. Not a very clever logrotate, though: options 'enable' (cronjob every hour) and the config flie contents passed as a string. svn path=/nixos/trunk/; revision=21438
2010-04-29 18:54:08 +00:00
./services/logging/logrotate.nix
Add logstash module. Since the logstash config file seemed very similar to a nixexpr, I decided to map directly from nixexprs to logstash configs. I didn't realize until too far in that this solution was probably way over-engineered, but it works.
2012-07-11 15:22:16 +00:00
./services/logging/logstash.nix
nixos/promtail: Add a promtail module
2020-11-02 22:35:34 +00:00
./services/logging/promtail.nix
Add module for rsyslog. Although rsyslog is supposed to be a drop-in replacement for sysklogd, it lacks some support for certain arguments used in the default syslog module of NixOS.
2013-03-15 11:55:49 +00:00
./services/logging/rsyslogd.nix
Add NixOS module for syslog-ng
2014-08-11 13:05:59 +00:00
./services/logging/syslog-ng.nix
SystemdJournal2Gelf.service: new service
2017-05-25 17:23:45 +00:00
./services/logging/syslogd.nix
nixos/vector: add module
2020-11-30 07:22:08 +00:00
./services/logging/vector.nix
nixos/ulogd: init Heavily based on original work by xvuko Co-authored-by: xvuko <nix@vuko.pl>
2022-12-27 23:17:14 +00:00
./services/logging/ulogd.nix
nixos/clamsmtp: init
2017-12-31 03:09:23 +00:00
./services/mail/clamsmtp.nix
nixos/davmail: init Co-authored-by: Aaron Andersen <aaron@fosslib.net> Co-authored-by: Silvan Mosberger <infinisil@icloud.com>
2018-12-14 18:25:27 +00:00
./services/mail/davmail.nix
nixos/dkimproxy-out: init (#33229)
2018-01-03 01:23:02 +00:00
./services/mail/dkimproxy-out.nix
Rename dovecot2 module to dovecot. We no longer support more than one version.
2012-09-25 09:23:03 +00:00
./services/mail/dovecot.nix
nixos/dspam: add module
2016-01-07 01:17:42 +00:00
./services/mail/dspam.nix
exim: add version 4.85 incl. nixos module
2015-02-18 18:55:07 +00:00
./services/mail/exim.nix
nixos/goeland: init
2022-12-14 15:14:29 +00:00
./services/mail/goeland.nix
nixos/listmonk: init module
2022-08-30 11:15:41 +00:00
./services/mail/listmonk.nix
nixos/maddy: Add module for maddy Co-authored-by: Patrick Hilhorst <git@hilhorst.be>
2021-09-10 11:08:58 +00:00
./services/mail/maddy.nix
Making a nixos option about the system 'sendmail', which postfix sets, for example. svn path=/nixos/trunk/; revision=24193
2010-10-10 10:43:28 +00:00
./services/mail/mail.nix
nixos/mailcatcher: init module for existing package
2019-03-27 00:56:24 +00:00
./services/mail/mailcatcher.nix
mailhog: init at 1.0.0 (#26821) * mailhog: init at 1.0.0 * formatting nitpicks
2017-06-24 16:05:34 +00:00
./services/mail/mailhog.nix
mailman: add NixOS module to install and deploy the mailing list server
2019-08-27 14:55:24 +00:00
./services/mail/mailman.nix
Add mlmmj package and nixos module.
2014-07-08 22:43:26 +00:00
./services/mail/mlmmj.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/mail/nullmailer.nix
nixos/offlineimap: Move to services/mail The services/networking directory is already quite polluted and the first point where I was looking for the offlineimap module was in services/mail and didn't find it there. Offlineimap already has IMAP in its name and clearly belongs to the "mail" category so let's move it there. Tested by evaluating a configuration with services.offlineimap enabled. Signed-off-by: aszlig <aszlig@redmoonstudios.org> Cc: @DamienCassou
2016-09-26 19:18:06 +00:00
./services/mail/offlineimap.nix
nixos/opendkim: add module
2016-01-06 22:10:56 +00:00
./services/mail/opendkim.nix
Add OpenSMTPD service option
2013-07-30 08:20:56 +00:00
./services/mail/opensmtpd.nix
nixos/pfix-srsd: add module
2015-12-24 19:34:43 +00:00
./services/mail/pfix-srsd.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/mail/postfix.nix
postfixadmin: init at 3.3.9
2021-05-19 04:34:03 +00:00
./services/mail/postfixadmin.nix
postgrey: init at 1.36 (includes service)
2015-11-17 17:30:10 +00:00
./services/mail/postgrey.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/mail/postsrsd.nix
nixos/public-inbox: init
2020-05-26 18:54:52 +00:00
./services/mail/public-inbox.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/mail/roundcube.nix
nixos: Add module for rspamd
2016-01-12 09:06:46 +00:00
./services/mail/rspamd.nix
nixos/rspamd-trainer: init; rspamd-trainer: init at unstable-2023-11-27
2023-10-18 09:47:00 +00:00
./services/mail/rspamd-trainer.nix
rss2email module: init Also adding `system-sendmail` package for sharing the code with other modules or packages needing it.
2018-10-27 09:33:43 +00:00
./services/mail/rss2email.nix
nixos/schleuder: init module and accompanying test Co-Authored-By: Martin Weinelt <hexa@darmstadt.ccc.de> Co-Authored-By: Cole Helbling <cole.helbling@determinate.systems>
2022-05-31 15:27:54 +00:00
./services/mail/schleuder.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/mail/spamassassin.nix
nixos/stalwart-mail: add module
2023-09-02 18:20:29 +00:00
./services/mail/stalwart-mail.nix
nixos/sympa: init module
2019-07-06 18:56:30 +00:00
./services/mail/sympa.nix
nixos/zeyple: init
2022-03-06 23:56:05 +00:00
./services/mail/zeyple.nix
nixos: move matrix services into their category
2022-05-13 07:46:01 +00:00
./services/matrix/appservice-discord.nix
./services/matrix/appservice-irc.nix
./services/matrix/conduit.nix
./services/matrix/dendrite.nix
nixos/hebbot: init This is a NixOS module to support TWIM-style Matrix bots.
2023-12-14 19:22:33 +00:00
./services/matrix/hebbot.nix
nixos/maubot: init
2023-11-04 01:53:27 +00:00
./services/matrix/maubot.nix
nixos: move matrix services into their category
2022-05-13 07:46:01 +00:00
./services/matrix/mautrix-facebook.nix
mautrix-meta: init service Acked-by: Rutherther <rutherther@proton.me>
2024-03-17 17:56:18 +00:00
./services/matrix/mautrix-meta.nix
nixos: move matrix services into their category
2022-05-13 07:46:01 +00:00
./services/matrix/mautrix-telegram.nix
nixos/mautrix-whatsapp: init module Import from PR https://github.com/NixOS/nixpkgs/pull/176025 Co-authored-by: Luflosi <Luflosi@users.noreply.github.com>
2023-07-15 12:36:53 +00:00
./services/matrix/mautrix-whatsapp.nix
nixos/mjolnir: init
2021-05-30 15:33:03 +00:00
./services/matrix/mjolnir.nix
nixos/mx-puppet-discord: move into matrix category
2023-01-16 06:23:25 +00:00
./services/matrix/mx-puppet-discord.nix
nixos/pantalaimon: init
2021-05-30 15:32:10 +00:00
./services/matrix/pantalaimon.nix
nixos/matrix-sliding-sync: init Co-authored-by: Emily <55066419+emilylange@users.noreply.github.com>
2023-07-14 22:45:32 +00:00
./services/matrix/matrix-sliding-sync.nix
nixos: move matrix services into their category
2022-05-13 07:46:01 +00:00
./services/matrix/synapse.nix
nixos/airsonic: add module
2017-08-23 12:09:48 +00:00
./services/misc/airsonic.nix
amazon-ssm-agent: rename from ssm-agent
2023-10-17 21:01:15 +00:00
./services/misc/amazon-ssm-agent.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/ananicy.nix
nixos/ankisyncd: init at 2.1.0
2020-03-09 21:08:44 +00:00
./services/misc/ankisyncd.nix
nixos/anki-sync-server: init Provide a NixOS module for the [built-in Anki Sync Server](https://docs.ankiweb.net/sync-server.html) included in recent versions of Anki. This supersedes the `ankisyncd` module, but we should keep that for now because `ankisyncd` supports older versions of Anki clients than this module.
2023-11-27 21:55:35 +00:00
./services/misc/anki-sync-server.nix
apache-kafka: New service for Apache Kafka
2015-01-28 22:07:27 +00:00
./services/misc/apache-kafka.nix
nixos/atuin: init module
2022-12-16 03:07:15 +00:00
./services/misc/atuin.nix
nixos/autofs: revive and update to systemd
2015-11-11 13:18:38 +00:00
./services/misc/autofs.nix
autorandr: 53d29f9 -> 855c18b and module
2017-04-06 10:03:31 +00:00
./services/misc/autorandr.nix
nixos/autosuspend: init at version 4.3.0 `autosuspend` is a daemon that periodically runs user-defined checks to verify whether the system should be suspended. It's already available in nixpkgs. This adds a NixOS module which starts the daemon as a systemd service. Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
2023-01-19 19:35:45 +00:00
./services/misc/autosuspend.nix
nixos/bazarr: init
2020-05-10 10:54:09 +00:00
./services/misc/bazarr.nix
nixos/bcg: init module This is gateway that transforms BigClown wireless to MQTT.
2023-04-25 14:57:15 +00:00
./services/misc/bcg.nix
nixos/beanstalkd: new service for existing package (#55953)
2019-02-22 13:10:02 +00:00
./services/misc/beanstalkd.nix
nixos/modules: services.bees init
2018-10-14 15:58:56 +00:00
./services/misc/bees.nix
services/misc/bepasty: init at 2015-10-21 This module implements a way to start one or more bepasty servers. It supports configuring the listen address of gunicorn and how bepasty behaves internally. Configuring multiple bepasty servers provides a way to serve pastes externally without authentication and provide creating,listing,deleting pastes interally. nginx can be used to provide access via hostname + listen address. `configuration.nix`: services.bepasty = { enable = true; servers = { internal = { defaultPermissions = "admin,list,create,read,delete"; secretKey = "secret"; bind = "127.0.0.1:8000"; }; external = { defaultPermissions = "read"; bind = "127.0.0.1:8001"; secretKey = "another-secret"; }; }; };
2015-10-21 12:45:27 +00:00
./services/misc/bepasty.nix
calibre-server service: init
2015-09-28 03:31:17 +00:00
./services/misc/calibre-server.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/canto-daemon.nix
cfdyndns: init at 0.0.1
2016-01-17 12:11:09 +00:00
./services/misc/cfdyndns.nix
Add cgminer crypto currency miner
2013-06-16 16:20:22 +00:00
./services/misc/cgminer.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/clipcat.nix
./services/misc/clipmenu.nix
nixos: add confd module
2015-04-25 14:10:49 +00:00
./services/misc/confd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/cpuminer-cryptonight.nix
nixos/db-rest: init
2023-11-14 20:58:11 +00:00
./services/misc/db-rest.nix
devmon: New service
2015-07-19 12:22:04 +00:00
./services/misc/devmon.nix
nixos: Add a dictd service.
2012-10-27 21:11:54 +00:00
./services/misc/dictd.nix
Revert "nixos/dysnomia nixos/disnix: Drop modules" This reverts commit a3f4db8679002e20cc33576b5ba80996cc7a3398.
2021-03-28 15:46:10 +00:00
./services/misc/disnix.nix
nixos: add docker-registry module
2014-11-21 16:20:14 +00:00
./services/misc/docker-registry.nix
domoticz: add module
2020-04-30 11:51:49 +00:00
./services/misc/domoticz.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/duckling.nix
./services/misc/dwm-status.nix
./services/misc/dysnomia.nix
errbot module: init
2016-10-11 13:17:44 +00:00
./services/misc/errbot.nix
nixos/etebase-server: add NixOS module
2020-11-28 19:31:55 +00:00
./services/misc/etebase-server.nix
nixos/etesync-dav: init module
2020-03-27 09:26:17 +00:00
./services/misc/etesync-dav.nix
nixos/evdevremapkeys: init Add a service for evdevremapkeys (already packaged), a daemon for remapping keyboard events
2023-02-08 03:59:36 +00:00
./services/misc/evdevremapkeys.nix
Added preliminary Apache Felix service svn path=/nixos/trunk/; revision=21244
2010-04-22 15:13:50 +00:00
./services/misc/felix.nix
nixos/forgejo: init Following a decicion from both the gitea and forgejo maintainers in nixpkgs. This means, that forgejo will no longer co-use the nixos/gitea module via `services.gitea.package = pkgs.forgejo`.
2023-08-06 16:40:02 +00:00
./services/misc/forgejo.nix
nixos/freeswitch: init
2020-01-07 14:53:34 +00:00
./services/misc/freeswitch.nix
fstrim: Add service
2017-05-30 13:39:27 +00:00
./services/misc/fstrim.nix
gammu-smsd service: init
2016-02-13 19:19:31 +00:00
./services/misc/gammu-smsd.nix
nixos/geoipupdate: Replace the old `geoip-updater` module Our old bespoke GeoIP updater doesn't seem to be working anymore. Instead of trying to fix it, replace it with the official updater from MaxMind.
2021-04-28 14:56:06 +00:00
./services/misc/geoipupdate.nix
gitea: add nixos service module
2017-10-18 04:16:46 +00:00
./services/misc/gitea.nix
Revert "gitlab: disable" This reverts commit 68c4605f1a251b97cb0fcde251ce52d498e2cef8. Gitlab has been fixed
2018-04-25 18:01:07 +00:00
./services/misc/gitlab.nix
nixos: add gitolite module Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-06-26 03:32:45 +00:00
./services/misc/gitolite.nix
gitweb: use common options
2018-03-29 13:42:49 +00:00
./services/misc/gitweb.nix
gogs service: init
2016-10-09 17:04:42 +00:00
./services/misc/gogs.nix
gollum service: init
2017-09-16 17:49:56 +00:00
./services/misc/gollum.nix
* Merge some stuff from the trunk. svn path=/nixos/branches/modular-nixos/; revision=16051
2009-06-26 11:36:38 +00:00
./services/misc/gpsd.nix
nixos/graphical-desktop: extract generic graphical things from xserver This is required to fix the keymap in SDDM without X.
2024-03-24 15:51:18 +00:00
./services/misc/graphical-desktop.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/greenclip.nix
nixos/guix: init
2023-10-29 06:44:03 +00:00
./services/misc/guix
headphones: init at 0.5.19
2018-09-16 19:47:47 +00:00
./services/misc/headphones.nix
nixos/heisenbridge: Add to modules-list.nix It seems to have been forgotten in #142758.
2022-01-13 01:28:56 +00:00
./services/misc/heisenbridge.nix
nixos/homepage-dashboard: init
2023-07-12 15:43:32 +00:00
./services/misc/homepage-dashboard.nix
ihaskell: re-enable
2017-11-06 06:29:56 +00:00
./services/misc/ihaskell.nix
nixos/input-remapper: init
2022-02-10 16:55:03 +00:00
./services/misc/input-remapper.nix
nixos/invidious-router: init module
2024-03-28 22:56:37 +00:00
./services/misc/invidious-router.nix
irkerd service: init
2017-03-16 22:01:56 +00:00
./services/misc/irkerd.nix
jackett: init at 0.7.1197 + nixos module
2017-03-25 20:18:34 +00:00
./services/misc/jackett.nix
nixos/jellyfin: init
2019-04-14 11:10:50 +00:00
./services/misc/jellyfin.nix
nixos/jellyseerr: init
2023-02-13 01:27:34 +00:00
./services/misc/jellyseerr.nix
nixos/klipper: init
2020-09-28 19:13:09 +00:00
./services/misc/klipper.nix
nixos/service/languagetool: init
2022-08-16 18:33:08 +00:00
./services/misc/languagetool.nix
leaps: 0.5.1 + add a service + test
2016-11-06 09:33:21 +00:00
./services/misc/leaps.nix
nixos/libreddit: init module and test
2021-04-18 23:05:25 +00:00
./services/misc/libreddit.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/lidarr.nix
nixos/lifecycled: init
2021-03-01 19:04:01 +00:00
./services/misc/lifecycled.nix
nixos/llama-cpp: add to module-list
2024-03-02 18:46:01 +00:00
./services/misc/llama-cpp.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/logkeys.nix
nixos/mame: init
2019-12-10 16:53:31 +00:00
./services/misc/mame.nix
mgpfan: new service
2015-05-01 01:15:19 +00:00
./services/misc/mbpfan.nix
Add MediaTomb service
2015-03-27 10:48:50 +00:00
./services/misc/mediatomb.nix
modules: adding metabase service
2019-08-12 11:15:36 +00:00
./services/misc/metabase.nix
nixos/mollysocket: init
2024-01-05 11:10:12 +00:00
./services/misc/mollysocket.nix
nixos/moonraker: init
2021-07-21 02:21:03 +00:00
./services/misc/moonraker.nix
nixos/mqtt2influxdb: init module
2023-04-26 07:19:19 +00:00
./services/misc/mqtt2influxdb.nix
nixos/n8n: init module and test
2020-11-28 17:00:25 +00:00
./services/misc/n8n.nix
nixos/nitter: init module and test
2021-07-26 10:00:05 +00:00
./services/misc/nitter.nix
* Add options to handle automatic calls to the garbage collector. These options avoid manual references to pkgs.nixUnstable which might be changed with environment.nix option. svn path=/nixos/trunk/; revision=18798
2009-12-04 12:50:44 +00:00
./services/misc/nix-gc.nix
nix-optimise service: init Closes https://github.com/NixOS/nixpkgs/pull/18378
2016-09-05 21:59:25 +00:00
./services/misc/nix-optimise.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/misc/nix-ssh-serve.nix
webos: init novacom, novacomd, cmake-modules; add nixos service
2017-10-03 11:43:40 +00:00
./services/misc/novacomd.nix
nixos/ntfy-sh: init
2022-09-01 12:36:19 +00:00
./services/misc/ntfy-sh.nix
nzbget: 16.4 -> 17.0-r1686 and nzbget service
2016-05-04 08:58:01 +00:00
./services/misc/nzbget.nix
nixos/nzbhydra2: init
2020-10-04 14:06:53 +00:00
./services/misc/nzbhydra2.nix
octoprint service: init
2016-02-14 11:58:09 +00:00
./services/misc/octoprint.nix
nixos/ollama: init
2023-12-29 00:46:01 +00:00
./services/misc/ollama.nix
nixos/ombi: create ombi service
2021-03-29 14:48:17 +00:00
./services/misc/ombi.nix
osrm service: init
2017-12-01 19:08:09 +00:00
./services/misc/osrm.nix
nixos/owncast: init owncast service
2021-09-23 08:48:29 +00:00
./services/misc/owncast.nix
packagekit: add latest from hughsie's github repo - currently pulled in from Git until the next release of PackageKit has Nix support - also: add in a service module to start packagekit properly - nixos service can be enabled via services.packagekit.enable - packagekit requires nixunstable to build properly
2016-06-16 19:18:09 +00:00
./services/misc/packagekit.nix
nixos/paperless-ng: rename to `paperless`, use `paperless-ngx` package Use this opportunity to rename `paperless-(ng)-server` to `paperless-scheduler`. This follows the naming scheme in the paperless repo and docs.
2022-04-12 15:48:53 +00:00
./services/misc/paperless.nix
parsoid: add service
2014-10-12 20:56:01 +00:00
./services/misc/parsoid.nix
persistent-evdev: init at unstable-2022-01-14
2022-03-07 23:03:23 +00:00
./services/misc/persistent-evdev.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/pinnwand.nix
plex: init at 0.9.11.16.958 Added a package and module for Plex Media Server, an application for managing media collections across multiple devices.
2015-04-16 18:15:59 +00:00
./services/misc/plex.nix
nixos/plikd: Add new service module
2020-11-13 09:07:16 +00:00
./services/misc/plikd.nix
nixos/podgrab: add module Closes #117284.
2021-04-14 17:06:37 +00:00
./services/misc/podgrab.nix
nixos/polaris: init
2022-06-17 18:04:54 +00:00
./services/misc/polaris.nix
nixos/portunus: init
2022-07-18 22:11:41 +00:00
./services/misc/portunus.nix
nixos/preload: init
2023-11-09 08:16:01 +00:00
./services/misc/preload.nix
nixos/prowlarr: init
2021-10-10 15:53:03 +00:00
./services/misc/prowlarr.nix
nixos/pufferpanel: init
2023-04-07 06:34:25 +00:00
./services/misc/pufferpanel.nix
pykms: nixos module
2017-07-25 07:20:24 +00:00
./services/misc/pykms.nix
radarr: init at 0.2.0.553 + nixos module
2017-03-25 20:18:34 +00:00
./services/misc/radarr.nix
readarr: init at 0.1.4.1596
2023-03-12 19:54:23 +00:00
./services/misc/readarr.nix
nixos: add redmine service
2014-10-07 08:53:01 +00:00
./services/misc/redmine.nix
Add ripple data api package and nixos service
2015-03-22 22:12:11 +00:00
./services/misc/ripple-data-api.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/rippled.nix
nixos/rmfakecloud: init module Co-authored-by: Roosemberth Palacios
2022-01-22 01:07:49 +00:00
./services/misc/rmfakecloud.nix
nixos/rkvm: init Co-authored-by: Lin Jian <me@linj.tech>
2023-10-04 14:13:20 +00:00
./services/misc/rkvm.nix
nixos/rshim: init
2023-05-12 12:45:27 +00:00
./services/misc/rshim.nix
safeeyes: add module
2018-04-04 20:15:16 +00:00
./services/misc/safeeyes.nix
sdrplay: init at 3.07.1 this adds support for software defined radio (SDR) devices by SDRplay. SDRplay provides an unfree binary library and api-service as well as a MIT licensed adapter library for SoapySDR for integration with many popular SDR applications.
2021-05-24 15:12:31 +00:00
./services/misc/sdrplay.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/serviio.nix
Add sickbeard module (with SickGear & SickRage)
2018-09-16 19:54:16 +00:00
./services/misc/sickbeard.nix
signald: add module Based on https://gitlab.com/coffeetables/myrdd/-/blob/master/modules/signald.nix
2021-09-18 20:54:55 +00:00
./services/misc/signald.nix
siproxd: initial service expression
2014-07-10 18:08:38 +00:00
./services/misc/siproxd.nix
snapper: add nixos module fixes #27154
2017-07-05 14:19:32 +00:00
./services/misc/snapper.nix
nixos/soft-serve: init This adds a NixOS module for Soft Serve, a tasty, self-hostable Git server for the command line. The module has a test that checks some basic things like creating users, creating a repo and cloning it. Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
2023-07-07 23:44:42 +00:00
./services/misc/soft-serve.nix
sonarr service: initial service
2016-06-02 19:00:00 +00:00
./services/misc/sonarr.nix
nixos/sourcehut: init (#113244) * nixos/sourcehut: init * sourcehut: default nginx setup * sourcehut: documentation * sourcehut: re-structure settings * sourcehut: tests * nixos/sourcehut: adopt StateDirectory * Apply suggestions from code review Co-authored-by: Aaron Andersen <aaron@fosslib.net> Co-authored-by: Thibaut Marty <github@thibautmarty.fr> Co-authored-by: malte-v <34393802+malte-v@users.noreply.github.com> * nixos/sourcehut: PR suggestions * nixos/sourcehut: malte-v patch * nixos/sourcehut: add base virtualhost * nixos/sourcehut: remove superfluous key * nixos/sourcehut: use default from cfg * nixos/sourcehut: use originBase for logs * nixos/sourcehut: use toPythonApplication in systemPackages * nixos/sourcehut: directly use ExecStart * nixos/sourcehut: update docs Co-authored-by: Aaron Andersen <aaron@fosslib.net> Co-authored-by: Thibaut Marty <github@thibautmarty.fr> Co-authored-by: malte-v <34393802+malte-v@users.noreply.github.com>
2021-06-05 18:42:51 +00:00
./services/misc/sourcehut
nixos/spice-autorandr: init
2023-10-08 20:22:45 +00:00
./services/misc/spice-autorandr.nix
spice-vdagentd service : initial at 0.16.0
2015-11-05 11:39:55 +00:00
./services/misc/spice-vdagentd.nix
nixos/spice-webdavd: init
2022-08-13 22:41:12 +00:00
./services/misc/spice-webdavd.nix
sssd: init at 1.14.2 perlPackages.TextWrapI18N: init at 0.06 perlPackages.Po4a: init at 0.47 jade: init at 1.2.1 ding-libs: init at 0.6.0 Switch nscd to no-caching mode if SSSD is enabled. abbradar: disable jade parallel building. Closes #21150
2016-04-14 18:18:09 +00:00
./services/misc/sssd.nix
subsonic service: init Add a systemd service and UID/GID for the Subsonic personal media streamer server (<http://subsonic.org>).
2015-07-04 00:42:16 +00:00
./services/misc/subsonic.nix
sundtek init at 30-06-2015
2015-07-02 01:18:56 +00:00
./services/misc/sundtek.nix
Added svnserve module, to serve Subversion repositories through the SVN protocol svn path=/nixos/trunk/; revision=25235
2010-12-22 13:32:16 +00:00
./services/misc/svnserve.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/misc/synergy.nix
sysprof: 1.2.0 -> 3.28.1
2017-12-31 14:52:50 +00:00
./services/misc/sysprof.nix
nixos/tabby: init module - Enable tabby to run as a systemd service - Document standard tabby configuration
2024-03-07 11:29:12 +00:00
./services/misc/tabby.nix
nixos/tandoor-recipes: init module
2022-09-17 14:36:39 +00:00
./services/misc/tandoor-recipes.nix
nixos/taskserver: Factor out nixos-taskdctl With a cluttered up module source it's really a pain to navigate through it, so it's a good idea to put it into another file. No changes in functionality here, just splitting up the files and fixing references. Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2016-04-05 16:07:21 +00:00
./services/misc/taskserver
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/misc/tautulli.nix
nixos/tiddlywiki: init Service that runs TiddlyWiki nodejs server
2019-04-29 20:46:00 +00:00
./services/misc/tiddlywiki.nix
tp-auto-kbbl: init at 0.1.5
2021-09-30 14:14:49 +00:00
./services/misc/tp-auto-kbbl.nix
nixos/tuxclocker: init module
2023-12-14 08:19:50 +00:00
./services/misc/tuxclocker.nix
nixos/transfer-sh: init Co-authored-by: Pablo Ovelleiro Corral <mail@pablo.tools>
2024-01-24 17:58:23 +00:00
./services/misc/transfer-sh.nix
tzupdate service: init
2017-10-17 16:26:02 +00:00
./services/misc/tzupdate.nix
uhub: initial service expression
2014-07-18 17:27:55 +00:00
./services/misc/uhub.nix
wastebin: init at 2.4.3 (#287455) * wastebin: init at 2.4.3 * nixos/wastebin: init Add module and test for wastebin
2024-04-01 00:55:15 +00:00
./services/misc/wastebin.nix
weechat: add NixOS module
2018-01-06 13:25:13 +00:00
./services/misc/weechat.nix
nixos/workout-tracker: init
2024-03-16 08:56:22 +00:00
./services/misc/workout-tracker.nix
xmr-stak module: init
2017-12-14 08:00:03 +00:00
./services/misc/xmr-stak.nix
nixos/xmrig: add services.xmrig to module-list.nix
2021-11-17 15:21:54 +00:00
./services/misc/xmrig.nix
zoneminder (nixos): add basic module
2019-01-03 14:16:44 +00:00
./services/misc/zoneminder.nix
Zookeeper
2014-08-24 15:43:45 +00:00
./services/misc/zookeeper.nix
nixos/alerta: create new module + add kapacitor integration
2018-11-08 21:34:23 +00:00
./services/monitoring/alerta.nix
Add apcupsd service apcupsd is a daemon for controlling APC UPSes. It is very simple to configure. If you have an USB based UPS, the default settings should be useable without further adjustments: services.apcupsd.enable = true; This will give you autodetection of USB UPSes, network access limited to localhost (for security) and the shutdown sequence will be started when the system when the battery level is below 50 percent, or when the UPS has calculated that it has 5 minutes or less of remaining power-on time. You can provide your own configuration file contents with this option: services.apcupsd.configText = "contents of apcupsd.conf"; Bug/annoyance 1: When apcupsd calls "wall" (on powerfail etc. events), it prints an error message because stdout is not connected to a tty (it is connected to the journal): wall: cannot get tty name: Inappropriate ioctl for device The message still gets through though, to ctrl-alt-f[1-6] terminals. Bug/annoyance 2: apcupsd tries to call "mail" (on powerfail etc. events), and that fails because I'm not passing in any mail program at the moment (because that would require more configuration options). A solution to this would be to simply let the user fully configure the apcupsd event handling logic in nix.
2013-07-17 03:19:54 +00:00
./services/monitoring/apcupsd.nix
arbtt service: init
2017-01-01 16:45:26 +00:00
./services/monitoring/arbtt.nix
nixos/below: Add service module
2023-05-26 16:01:04 +00:00
./services/monitoring/below.nix
Add a NixOS module to run bosun
2014-11-20 14:49:45 +00:00
./services/monitoring/bosun.nix
nixos: add cadvisor service
2014-12-28 19:21:41 +00:00
./services/monitoring/cadvisor.nix
nixos/certspotter: init
2023-10-23 11:25:38 +00:00
./services/monitoring/certspotter.nix
nixos/cockpit: init Signed-off-by: lucasew <lucas59356@gmail.com>
2023-01-05 18:23:55 +00:00
./services/monitoring/cockpit.nix
nixos: add collectd module
2014-09-13 00:03:15 +00:00
./services/monitoring/collectd.nix
add das_watchdog: a realtime watchdog
2015-05-25 15:40:16 +00:00
./services/monitoring/das_watchdog.nix
nixos/datadog-agent: add module This is the new v6 version of datadog-agent. The old v5 module is kept as dd-agent.
2018-05-27 13:59:38 +00:00
./services/monitoring/datadog-agent.nix
nixos/do-agent: init
2019-09-20 18:00:48 +00:00
./services/monitoring/do-agent.nix
FusionInventory: Add NixOS module.
2017-08-10 11:13:35 +00:00
./services/monitoring/fusion-inventory.nix
nixos/goss: init
2023-10-25 11:54:42 +00:00
./services/monitoring/goss.nix
nixos: add grafana-agent module Easily ship logs and metrics to Grafana Cloud and other similar targets.
2022-06-15 10:11:03 +00:00
./services/monitoring/grafana-agent.nix
nixos/grafana-image-renderer: init
2021-01-01 15:51:18 +00:00
./services/monitoring/grafana-image-renderer.nix
nixos/grafana_reporter: initial service
2018-04-06 16:02:10 +00:00
./services/monitoring/grafana-reporter.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/monitoring/grafana.nix
Add graphite, scalable realtime graphing service
2013-08-11 10:16:19 +00:00
./services/monitoring/graphite.nix
New hdapsd module
2016-02-24 20:43:38 +00:00
./services/monitoring/hdaps.nix
heapster module: init
2015-11-16 14:26:07 +00:00
./services/monitoring/heapster.nix
initial work on incron service
2018-08-25 22:08:24 +00:00
./services/monitoring/incron.nix
nixos/kapacitor: new service
2018-11-01 20:52:17 +00:00
./services/monitoring/kapacitor.nix
nixos/karma: init
2022-10-10 05:16:25 +00:00
./services/monitoring/karma.nix
nixos/kthxbye: init
2022-09-25 18:46:03 +00:00
./services/monitoring/kthxbye.nix
nixos/librenms: init
2023-07-07 11:46:40 +00:00
./services/monitoring/librenms.nix
nixos/loki: add module
2019-06-27 16:10:41 +00:00
./services/monitoring/loki.nix
longview nixos module: init
2015-11-01 10:22:58 +00:00
./services/monitoring/longview.nix
nixos/mackerel-agent: init
2020-08-30 13:21:15 +00:00
./services/monitoring/mackerel-agent.nix
nixos/metricbeat: init
2021-03-19 16:16:10 +00:00
./services/monitoring/metricbeat.nix
grafana-mimir: add initial module
2022-04-28 23:11:19 +00:00
./services/monitoring/mimir.nix
Adding Monit - one more service to watch system.. svn path=/nixos/trunk/; revision=18399
2009-11-18 08:39:10 +00:00
./services/monitoring/monit.nix
munin: refactor package and add nixos service
2013-10-15 01:16:10 +00:00
./services/monitoring/munin.nix
nagios: significant upgrades - Upgrade Nagios Core to 4.x - Expose mainConfigFile and cgiConfigFile in module for finer configuration control. - Upgrade Plugins to 2.x - Remove default objectDefs, which users probably want to customize. - Systemd-ify Nagios module and simplify directory structure - Upgrade Nagios package with more modern patch, and ensure the statedir is set to /var/lib/nagios Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-06-22 04:35:09 +00:00
./services/monitoring/nagios.nix
netdata service: init
2016-11-05 12:09:29 +00:00
./services/monitoring/netdata.nix
nixos/nezha-agent: init module
2024-03-31 19:32:54 +00:00
./services/monitoring/nezha-agent.nix
nixos/ocsinventory-agent: init
2023-11-02 00:28:05 +00:00
./services/monitoring/ocsinventory-agent.nix
nixiso/opentelemetry-collector: init
2023-03-14 13:15:17 +00:00
./services/monitoring/opentelemetry-collector.nix
nixos/osquery: init
2023-07-19 09:58:49 +00:00
./services/monitoring/osquery.nix
nixos/parsedmarc: Add NixOS module
2021-06-02 12:32:20 +00:00
./services/monitoring/parsedmarc.nix
nixos/prometheus.alertmanagerIrcRelay: init Co-authored-by: Martin Weinelt <mweinelt@users.noreply.github.com>
2022-05-02 15:31:17 +00:00
./services/monitoring/prometheus/alertmanager-irc-relay.nix
prometheus module: add varnishExporter
2016-11-27 08:15:19 +00:00
./services/monitoring/prometheus/alertmanager.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/monitoring/prometheus/default.nix
nixos/prometheus-exporters: rewrite and restructure - prometheus exporters are now configured with `services.prometheus.exporters.<name>` - the exporters are now defined by attribute sets from which the options for each exporter are generated - most of the exporter definitions are used unchanged, except for some changes that should't have any impact on the functionality.
2018-03-09 20:33:09 +00:00
./services/monitoring/prometheus/exporters.nix
nixos/prometheus/pushgateway: add module and test
2019-04-15 21:46:25 +00:00
./services/monitoring/prometheus/pushgateway.nix
nixos/prometheus.sachet: add module
2021-07-10 10:23:04 +00:00
./services/monitoring/prometheus/sachet.nix
prometheus-xmpp-alerts: init at 0.4.2
2020-02-01 14:02:58 +00:00
./services/monitoring/prometheus/xmpp-alerts.nix
Add NixOS module for the Riemann dashboard server
2014-08-23 15:39:45 +00:00
./services/monitoring/riemann-dash.nix
Add riemann-tools to nixpkgs Adds package via bundlerEnv and service for Riemann health.
2015-06-30 21:16:51 +00:00
./services/monitoring/riemann-tools.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/monitoring/riemann.nix
rustdesk-server: init module
2023-12-18 11:00:00 +00:00
./services/monitoring/rustdesk-server.nix
scollector: New NixOS module
2014-11-20 14:38:04 +00:00
./services/monitoring/scollector.nix
nixos/scrutiny: init
2024-02-19 09:46:23 +00:00
./services/monitoring/scrutiny.nix
modules/services/monitoring/smartd.nix: added support for running smart daemon Set "services.smartd.enable = true" to enable the service. svn path=/nixos/trunk/; revision=27767
2011-07-13 17:47:34 +00:00
./services/monitoring/smartd.nix
nixos/snmpd: init
2023-12-02 14:05:45 +00:00
./services/monitoring/snmpd.nix
nixos/statsd: add missing module import
2022-12-21 19:15:58 +00:00
./services/monitoring/statsd.nix
nixos: add sysstat to module list The service itself was added in d3d7f43f762062c03aa083aeaa7cf868246e4e51
2017-01-28 10:50:01 +00:00
./services/monitoring/sysstat.nix
impl: teamviewer daemon
2015-04-05 14:19:19 +00:00
./services/monitoring/teamviewer.nix
telegraf: init at 1.0.0 Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
2016-09-08 13:30:20 +00:00
./services/monitoring/telegraf.nix
nixos/thanos: add module for the thanos service
2019-04-29 08:30:25 +00:00
./services/monitoring/thanos.nix
tremor-rs: module init
2022-11-18 22:20:05 +00:00
./services/monitoring/tremor-rs.nix
nixos/tuptime: init module
2020-03-24 22:45:20 +00:00
./services/monitoring/tuptime.nix
nixos/unifi-poller: rename to unpoller.
2022-11-24 15:30:14 +00:00
./services/monitoring/unpoller.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/monitoring/ups.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/monitoring/uptime-kuma.nix
Add uptime module Signed-off-by: Shea Levy <shea@shealevy.com>
2013-07-18 23:25:35 +00:00
./services/monitoring/uptime.nix
vmagent: init at 1.82.0
2022-10-09 09:19:24 +00:00
./services/monitoring/vmagent.nix
nixos/vmalert: init
2023-05-13 13:27:01 +00:00
./services/monitoring/vmalert.nix
vnstat service: init (#19809)
2017-01-24 13:45:01 +00:00
./services/monitoring/vnstat.nix
nixos/watchdog: add module
2023-11-02 17:46:12 +00:00
./services/monitoring/watchdogd.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/monitoring/zabbix-agent.nix
nixos/zabbixProxy: init module
2019-07-11 22:55:58 +00:00
./services/monitoring/zabbix-proxy.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/monitoring/zabbix-server.nix
cachefilesd service: init
2016-10-16 16:56:13 +00:00
./services/network-filesystems/cachefilesd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/ceph.nix
davfs2: create user/group davfs2 if not specified in the configuration * Add options: - enable - davUser (default: "davfs2") - davGroup (default: "davfs2) * Add davfs2 user or group if they are not specified in the configuration
2017-12-10 01:55:05 +00:00
./services/network-filesystems/davfs2.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/diod.nix
* Add a module for DRBD. svn path=/nixos/trunk/; revision=30202
2011-11-03 02:14:57 +00:00
./services/network-filesystems/drbd.nix
nixos/eris-server: init
2023-07-29 10:20:37 +00:00
./services/network-filesystems/eris-server.nix
services: add GlusterFS service This service is only limited in configuration options. But it is sufficient to run glusterd and configure it using the gluster command
2017-01-26 21:49:22 +00:00
./services/network-filesystems/glusterfs.nix
kbfs service: init (#25610) * kbfs service: init
2017-05-22 00:14:12 +00:00
./services/network-filesystems/kbfs.nix
kubo: rename from ipfs Go-IPFS was renamed to Kubo in version 0.14.0, see https://github.com/ipfs/kubo/issues/8959.
2022-07-24 18:49:05 +00:00
./services/network-filesystems/kubo.nix
nixos/litestream: init
2021-07-30 15:41:54 +00:00
./services/network-filesystems/litestream/default.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/moosefs.nix
netatalk: 3.1.0 -> 3.1.7, new service module
2015-08-14 05:05:03 +00:00
./services/network-filesystems/netatalk.nix
* Renamed services.nfsKernel to services.nfs. Unfortunately rename.nix doesn't allow renaming sets of options... * Renamed nfs-kernel.nix to nfsd.nix * Move NFS client stuff from nfsd.nix to filesystems/nfs.nix. svn path=/nixos/trunk/; revision=33174
2012-03-16 20:41:49 +00:00
./services/network-filesystems/nfsd.nix
nixos/openafsClient: relocate nixos module
2018-01-24 14:09:28 +00:00
./services/network-filesystems/openafs/client.nix
nixos/openafsServer: OpenAFS server nixos module
2018-01-24 17:32:33 +00:00
./services/network-filesystems/openafs/server.nix
nixos/orangefs: add modules for server and client
2019-08-20 22:26:36 +00:00
./services/network-filesystems/orangefs/client.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/orangefs/server.nix
rsync updated 3.0.9 to 3.1.0, rsyncd service module
2014-04-11 11:35:06 +00:00
./services/network-filesystems/rsyncd.nix
nixos/samba-wsdd: init service samba-wsdd
2020-11-22 12:26:08 +00:00
./services/network-filesystems/samba-wsdd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/samba.nix
services: Add Tahoe-LAFS service. Including systemd configuration and much of the standard storage node and introducer configuration.
2016-03-23 06:40:35 +00:00
./services/network-filesystems/tahoe.nix
nixos: u9fs service module
2015-02-22 15:07:30 +00:00
./services/network-filesystems/u9fs.nix
nixos/webdav-server-rs: init
2021-11-21 05:04:06 +00:00
./services/network-filesystems/webdav-server-rs.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/webdav.nix
xtreemfs: add nixos module
2015-09-13 12:49:19 +00:00
./services/network-filesystems/xtreemfs.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/network-filesystems/yandex-disk.nix
nixos/3proxy: init
2019-10-10 11:56:05 +00:00
./services/networking/3proxy.nix
nixos/acme-dns: init
2023-05-31 13:08:37 +00:00
./services/networking/acme-dns.nix
nixos/adguardhome: init (#120568)
2021-04-30 18:55:31 +00:00
./services/networking/adguardhome.nix
nixos/alice-lg: init
2023-04-11 15:55:16 +00:00
./services/networking/alice-lg.nix
Added AMule daemon service svn path=/nixos/trunk/; revision=23848
2010-09-18 11:30:04 +00:00
./services/networking/amuled.nix
nixos/antennas: initial service
2021-09-23 20:54:29 +00:00
./services/networking/antennas.nix
aria2 (nixos): actually load the module Fixes #33991
2018-01-31 01:40:15 +00:00
./services/networking/aria2.nix
Added NixOS module for Asterisk server
2015-04-16 22:53:26 +00:00
./services/networking/asterisk.nix
nixos: add atftpd service
2014-06-12 05:36:16 +00:00
./services/networking/atftpd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/autossh.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/avahi-daemon.nix
babeld module: init
2017-01-17 13:45:43 +00:00
./services/networking/babeld.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/bee.nix
nixos/biboumi: init
2020-08-08 01:01:01 +00:00
./services/networking/biboumi.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/bind.nix
nixos/bird-lg: init
2022-05-19 09:37:12 +00:00
./services/networking/bird-lg.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/bird.nix
nixos/birdwatcher: init
2023-04-12 07:20:16 +00:00
./services/networking/birdwatcher.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/bitcoind.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/bitlbee.nix
nixos/blockbook-frontend: init
2020-06-23 11:08:46 +00:00
./services/networking/blockbook-frontend.nix
nixos/blocky: init
2022-02-10 22:44:18 +00:00
./services/networking/blocky.nix
centrifugo: init at 5.1.1
2023-08-15 03:34:32 +00:00
./services/networking/centrifugo.nix
nixos/cgit: init
2022-04-05 00:02:11 +00:00
./services/networking/cgit.nix
add charybdis nixos module
2015-05-09 19:35:29 +00:00
./services/networking/charybdis.nix
nixos/chisel-server: add module
2022-09-29 18:19:33 +00:00
./services/networking/chisel-server.nix
cjdns: update to 20130303 build system is now nodejs based new nixos module to start cjdns
2014-03-23 01:38:04 +00:00
./services/networking/cjdns.nix
nixos/cloudflare-dyndns: init
2022-05-01 22:23:51 +00:00
./services/networking/cloudflare-dyndns.nix
nixos/cloudflared: init
2021-05-18 01:19:12 +00:00
./services/networking/cloudflared.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/networking/cntlm.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/networking/connman.nix
nixos/consul: Add module
2014-09-15 08:26:26 +00:00
./services/networking/consul.nix
nixos/coredns: init (#54931)
2019-03-01 09:10:44 +00:00
./services/networking/coredns.nix
nixos/corerad: init
2020-01-07 16:52:32 +00:00
./services/networking/corerad.nix
coturn: init at 4.5.0.3 (#16284)
2016-06-21 10:59:29 +00:00
./services/networking/coturn.nix
nixos/create_ap: add module
2022-04-13 17:20:37 +00:00
./services/networking/create_ap.nix
nixos/croc: init
2020-07-22 08:34:57 +00:00
./services/networking/croc.nix
nixos/dae: init
2023-08-07 06:32:32 +00:00
./services/networking/dae.nix
dante service: init
2016-10-14 05:07:59 +00:00
./services/networking/dante.nix
nixos/deconz: init Add a NixOS module for the deCONZ Zigbee gateway service.
2023-09-17 18:03:50 +00:00
./services/networking/deconz.nix
Revert "ddclient: remove package and module on upstream maintainer request" This reverts commit d35df28f65208764f6f94ba330c98615d95b934c. Upstream ddclient has new maintainers and made a new release (update in next commit(s)).
2023-10-15 14:32:44 +00:00
./services/networking/ddclient.nix
* Make dhcpcd the default DHCP client. svn path=/nixos/trunk/; revision=33339
2012-03-21 17:49:54 +00:00
./services/networking/dhcpcd.nix
nixos/dnscache: add module with improvements suggested by Jörg Thalheim <joerg@thalheim.io>
2016-04-23 18:49:48 +00:00
./services/networking/dnscache.nix
nixos/dnscrypt-proxy2: init This removes the original dnscrypt-proxy module as well. Co-authored-by: Atemu <atemu.main@gmail.com> Co-authored-by: Silvan Mosberger <contact@infinisil.com> Co-authored-by: ryneeverett <ryneeverett@gmail.com> Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
2018-10-12 21:38:54 +00:00
./services/networking/dnscrypt-proxy2.nix
dnscrypt-wrapper: add service
2017-01-20 00:36:55 +00:00
./services/networking/dnscrypt-wrapper.nix
nixos/dnsdist: initial service
2018-03-17 23:05:27 +00:00
./services/networking/dnsdist.nix
Adding a dnsmasq simple module. svn path=/nixos/trunk/; revision=26820
2011-04-13 14:09:02 +00:00
./services/networking/dnsmasq.nix
nixos/dnsproxy: init module
2024-02-11 13:22:27 +00:00
./services/networking/dnsproxy.nix
doh-proxy-rust: init at 0.3.8
2020-08-18 06:36:13 +00:00
./services/networking/doh-proxy-rust.nix
Generate the module-list.nix which index all valid modules. Non-valid modules are commented inside the generated list. Move module paths which are not the module directory into the legacy.nix file. svn path=/nixos/branches/modular-nixos/; revision=15751
2009-05-27 20:27:54 +00:00
./services/networking/ejabberd.nix
nixos/envoy: init
2021-08-28 02:28:27 +00:00
./services/networking/envoy.nix
epmd: Introduce erlang port mapper daemon service Having socket-activated epmd means that there always be only a single instance managed centrally. Because Erlang also starts it automatically if not available, and in worst case scenario 'epmd' can be started by some Erlang application running under systemd. And then restarting this application unit will cause complete loss of names in 'epmd' (if other Erlang system are also installed on this host). E.g. see at which lengths RabbitMQ goes to recover from such situations: https://github.com/rabbitmq/rabbitmq-server/blame/7741b37b1efa97ac9b17685cc626bd35ee52ca16/src/rabbit_epmd_monitor.erl#L36 Having the only one socket-activated epmd completely solves this problem.
2018-01-25 19:28:58 +00:00
./services/networking/epmd.nix
nixos/ergo: init
2020-05-24 18:39:10 +00:00
./services/networking/ergo.nix
nixos/ergochat: init
2022-01-12 20:40:43 +00:00
./services/networking/ergochat.nix
nixos/eternal-terminal: init new module.
2018-10-20 00:36:38 +00:00
./services/networking/eternal-terminal.nix
expressvpn: init at 3.25.0.13
2022-05-28 14:40:53 +00:00
./services/networking/expressvpn.nix
fakeroute: add service
2016-11-21 20:04:46 +00:00
./services/networking/fakeroute.nix
nixos/fastnetmon-advanced: init
2023-05-10 12:28:38 +00:00
./services/networking/fastnetmon-advanced.nix
ferm: init at 2.3
2016-08-21 21:12:19 +00:00
./services/networking/ferm.nix
nixos/firefox-syncserver: init
2022-06-08 02:26:34 +00:00
./services/networking/firefox-syncserver.nix
nixos/fireqos: add service
2017-09-08 22:29:46 +00:00
./services/networking/fireqos.nix
* Add an option to enable the firewall. It should eventually be enabled by default. svn path=/nixos/branches/modular-nixos/; revision=16464
2009-07-26 21:27:35 +00:00
./services/networking/firewall.nix
nixos/{firewall, nat}: add a nftables based implementation
2022-12-22 16:23:23 +00:00
./services/networking/firewall-iptables.nix
./services/networking/firewall-nftables.nix
flannel service: init
2016-09-27 20:56:58 +00:00
./services/networking/flannel.nix
Adding freenet module
2013-04-21 07:27:41 +00:00
./services/networking/freenet.nix
freeradius module: add to modules-list.nix This was somehow never added and was thus never available. It works.
2018-08-01 20:23:31 +00:00
./services/networking/freeradius.nix
nixos/frp: init
2023-09-12 16:13:15 +00:00
./services/networking/frp.nix
nixos/frr: init - old quagga service and test adapted to frr Co-Authored-By: Martin Weinelt <hexa@darmstadt.ccc.de>
2021-06-08 19:35:17 +00:00
./services/networking/frr.nix
GateOne: init at 1.2
2015-07-31 04:22:44 +00:00
./services/networking/gateone.nix
gnustep: add nixos deamons Adding basic daemons: gdomap and gdnc. It seems that GWorkspace does is unable to work properly without the daemons.
2014-12-13 16:48:39 +00:00
./services/networking/gdomap.nix
nixos/ghostunnel: init
2021-05-19 23:15:28 +00:00
./services/networking/ghostunnel.nix
Git daemon: packaged. svn path=/nixos/trunk/; revision=25163
2010-12-17 07:33:20 +00:00
./services/networking/git-daemon.nix
globalprotect-openconnect: init at 1.2.6 Co-authored-by: Sandro <sandro.jaeckel@gmail.com> Co-authored-by: sterni <sternenseemann@systemli.org>
2020-12-02 15:45:03 +00:00
./services/networking/globalprotect-vpn.nix
nixos/gns3-server: init
2023-10-22 21:04:10 +00:00
./services/networking/gns3-server.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/gnunet.nix
nixos/go-autoconfig: init module
2022-08-03 09:02:32 +00:00
./services/networking/go-autoconfig.nix
nixos/go-camo: init
2022-06-25 15:20:59 +00:00
./services/networking/go-camo.nix
nixos/go-neb: init
2020-06-01 20:31:10 +00:00
./services/networking/go-neb.nix
nixos/go-shadowsocks2: init
2019-08-26 17:39:36 +00:00
./services/networking/go-shadowsocks2.nix
nixos/gobpgd: init
2021-04-09 14:57:11 +00:00
./services/networking/gobgpd.nix
Adding GVPE service svn path=/nixos/trunk/; revision=18431
2009-11-18 14:54:37 +00:00
./services/networking/gvpe.nix
nixos/hans: init
2018-03-27 16:43:11 +00:00
./services/networking/hans.nix
nixos/harmonia: init service
2023-05-07 16:34:09 +00:00
./services/networking/harmonia.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/networking/haproxy.nix
nixos/headscale: Add headscale service module
2022-01-27 20:15:38 +00:00
./services/networking/headscale.nix
- add a hostapd module
2012-10-06 04:39:56 +00:00
./services/networking/hostapd.nix
nixos: add htpdate module
2016-08-02 22:57:20 +00:00
./services/networking/htpdate.nix
nixos/https-dns-proxy: init module
2020-02-27 09:20:04 +00:00
./services/networking/https-dns-proxy.nix
modules: HylaFAX server configuration This commit adds the following * the uucp user * options for HylaFAX server to control startup and modems * systemd services for HylaFAX server processes including faxgettys for modems * systemd services to maintain the HylaFAX spool area, including cleanup with faxcron and faxqclean * default configuration for all server processes for a minimal working configuration Some notes: * HylaFAX configuration cannot be initialized with faxsetup (as it would be common on other Linux distributions). The hylafaxplus package contains a template spool area. * Modems are controlled by faxgetty. Send-only configuration (modems controlled by faxq) is not supported by this configuration setup. * To enable the service, one or more modems must be defined with config.services.hylafax.modems . * Sending mail *should* work: HylaFAX will use whatever is in config.services.mail.sendmailSetuidWrapper.program unless overridden with the sendmailPath option. * The admin has to create a hosts.hfaxd file somewhere (e.g. in /etc) before enabling HylaFAX. This file controls access to the server (see hosts.hfaxd(5) ). Sadly, HylaFAX does not permit account-based access control as is accepts connections via TCP only. * Active fax polling should work; I can't test it. * Passive fax polling is not supported by HylaFAX. * Pager transmissions (with sendpage) are disabled by default. I have never tested or used these. * Incoming data/voice/"extern"al calls won't be handled by default. I have never tested or used these.
2018-08-04 15:08:54 +00:00
./services/networking/hylafax/default.nix
i2p: add service to module-list
2015-04-15 18:49:19 +00:00
./services/networking/i2p.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/i2pd.nix
nixos/icecream: add modules This adds modules for the icecream scheduler and daemon. Icecream can be used for distributed compilation, especially in environments with diverse toolchains, since it sends the complete build environment to the daemon. Unfortunatley the daemon can't be run with DynamicUser = true, since the daemon requires to be started as root in order to accept other build environments, see [1]. [1]: https://github.com/icecc/icecream#using-icecream-in-heterogeneous-environments
2020-04-04 17:15:49 +00:00
./services/networking/icecream/daemon.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/icecream/scheduler.nix
nixos/imaginary: init
2023-02-07 07:07:21 +00:00
./services/networking/imaginary.nix
nixos/modules/inspircd: add simplistic module and nixos test
2021-03-22 13:32:46 +00:00
./services/networking/inspircd.nix
iodine service: add clients implimentation - services.iodined moved to services.iodine - configuration file backwards compatable - old iodine server configuration moved to services.iodine.server - attribute set services.iodine.clients added to specify any number of iodine clients - example: iodine.clients.home = { server = "iodinesubdomain.yourserver.com"; ... }; - client services names iodine-name where name would be home
2016-03-26 16:02:00 +00:00
./services/networking/iodine.nix
nixos/iperf: Init the module
2018-07-26 17:40:23 +00:00
./services/networking/iperf3.nix
* Move ircd-hybrid stuff from the services tree to the nixos tree. svn path=/nixos/trunk/; revision=27009
2011-04-27 16:27:05 +00:00
./services/networking/ircd-hybrid/default.nix
nixos/iscsi/initiator: init Co-authored-by: Graham Christensen <graham@floxdev.com>
2020-10-18 17:51:47 +00:00
./services/networking/iscsi/initiator.nix
nixos/iscsi/root-initiator: init Co-authored-by: Graham Christensen <graham@floxdev.com>
2020-10-18 17:52:18 +00:00
./services/networking/iscsi/root-initiator.nix
nixos: iscsi/target: init module Co-authored-by: Graham Christensen <graham@floxdev.com>
2021-03-09 18:15:07 +00:00
./services/networking/iscsi/target.nix
nixos/ivpn: init
2023-04-16 18:17:04 +00:00
./services/networking/ivpn.nix
iwd: init at unstable-2017-04-21
2017-04-23 21:12:21 +00:00
./services/networking/iwd.nix
nixos/jibri: init at 8.0-93-g51fe7a2 This module was written by @puckipedia for nixcon-video-infra 2020. Minor changes made by @cleeyv for compat with existing jibri package. Co-authored-by: Puck Meerburg <puck@puck.moe>
2021-09-24 01:12:12 +00:00
./services/networking/jibri/default.nix
nixos/jicofo: init
2020-05-04 15:00:58 +00:00
./services/networking/jicofo.nix
nixos/jigasi: init
2023-12-07 13:36:53 +00:00
./services/networking/jigasi.nix
nixos/jitsi-videobridge: init
2020-04-29 22:40:51 +00:00
./services/networking/jitsi-videobridge.nix
nixos/jool: add service for setting up SIIT/NAT64
2023-07-01 16:48:14 +00:00
./services/networking/jool.nix
nixos/kea: init
2021-07-11 23:34:06 +00:00
./services/networking/kea.nix
keepalived service: init (#22755)
2017-04-20 11:50:59 +00:00
./services/networking/keepalived/default.nix
kbfs service: init (#25610) * kbfs service: init
2017-05-22 00:14:12 +00:00
./services/networking/keybase.nix
nixos/knot: init
2019-03-13 00:12:56 +00:00
./services/networking/knot.nix
add kresd service with basic options Still celebrating today's 1.2.0 release!
2017-01-25 17:41:52 +00:00
./services/networking/kresd.nix
lambdabot: add nixos service
2015-04-13 23:06:37 +00:00
./services/networking/lambdabot.nix
nixos/legit: init
2023-05-24 12:47:50 +00:00
./services/networking/legit.nix
libreswan: add package and service to nixos
2016-02-24 04:06:45 +00:00
./services/networking/libreswan.nix
lldpd: init at 0.9.7
2017-05-20 20:45:48 +00:00
./services/networking/lldpd.nix
logmein-hamachi: init at 2.1.0.139, add nixos service
2015-08-19 09:09:47 +00:00
./services/networking/logmein-hamachi.nix
nixos/lokinet: init
2022-05-31 05:54:41 +00:00
./services/networking/lokinet.nix
nixos/lxd-image-server: init Co-authored-by: Aaron Andersen <aaron@fosslib.net>
2021-11-03 13:28:09 +00:00
./services/networking/lxd-image-server.nix
nixos/magic-wormhole-mailbox-server: moving from mail to networking
2020-03-31 14:29:39 +00:00
./services/networking/magic-wormhole-mailbox-server.nix
matterbridge, modules/matterbridge: init at 1.1.0
2017-09-02 04:21:26 +00:00
./services/networking/matterbridge.nix
nixos/microsocks: init
2024-03-25 12:34:02 +00:00
./services/networking/microsocks.nix
nixos/mihomo: init
2024-02-10 14:23:36 +00:00
./services/networking/mihomo.nix
Add a module for MiniDLNA Now my NixOS machine can serve videos to my Bluray player!
2013-02-16 22:08:53 +00:00
./services/networking/minidlna.nix
miniupnpd: add service
2015-12-08 09:40:43 +00:00
./services/networking/miniupnpd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/miredo.nix
./services/networking/mjpg-streamer.nix
nixos/mmsd: init
2022-10-20 12:05:08 +00:00
./services/networking/mmsd.nix
nixos/monero: init
2018-02-05 21:02:14 +00:00
./services/networking/monero.nix
morty: init as service
2018-05-30 16:13:16 +00:00
./services/networking/morty.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/mosquitto.nix
mozillavpn: init at 2.7.1 Signed-off-by: Anders Kaseorg <andersk@mit.edu>
2022-02-14 22:53:18 +00:00
./services/networking/mozillavpn.nix
nixos/network-interfaces: Add mstpd support for bridges
2015-01-07 22:34:15 +00:00
./services/networking/mstpd.nix
mtprotoproxy service: init
2019-06-09 08:19:42 +00:00
./services/networking/mtprotoproxy.nix
mtr-exporter: init at 0.1.0 (3ce854a5) This is a useful utility for monitoring network performance over time using a combination of MTR and Prometheus. Also adding a service definition. Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-01-08 10:52:36 +00:00
./services/networking/mtr-exporter.nix
nixos/mullvad-vpn: add service mullvad-vpn package is mostly useless without it.
2019-10-08 17:01:14 +00:00
./services/networking/mullvad-vpn.nix
nixos/multipath: add multipath module The multipath-tools package had existed in Nixpkgs for some time but without a nixos module to configure/drive it. This module provides attributes to drive the majority of multipath configuration options and is being successfully used in stage-1 and stage-2 boot to mount /nix from a multipath-serviced iSCSI volume. Credit goes to @grahamc for early contributions to the module and authoring the NixOS module test.
2021-03-11 11:46:31 +00:00
./services/networking/multipath.nix
nixos: murmur service Murmur is the headless server component of the Mumble chat system. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-01 04:31:09 +00:00
./services/networking/murmur.nix
modules: add mxisd with test
2018-11-04 21:18:06 +00:00
./services/networking/mxisd.nix
nixos/mycelium: init
2024-03-18 15:14:25 +00:00
./services/networking/mycelium.nix
namecoind nixos module: init
2015-09-08 17:24:40 +00:00
./services/networking/namecoind.nix
nar-serve: init at 0.3.0 (#95420) * nar-serve: init at 0.3.0 * nixos/nar-serve: add new module Co-authored-by: zimbatm <zimbatm@zimbatm.com>
2020-11-06 17:59:51 +00:00
./services/networking/nar-serve.nix
* Add a module for doing Network Address Translation. svn path=/nixos/trunk/; revision=26246
2011-03-10 12:08:39 +00:00
./services/networking/nat.nix
nixos/{firewall, nat}: add a nftables based implementation
2022-12-22 16:23:23 +00:00
./services/networking/nat-iptables.nix
./services/networking/nat-nftables.nix
nixos/nats: init
2021-06-26 11:58:40 +00:00
./services/networking/nats.nix
nbd: add programs.nbd, services.nbd, and test Changes: nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/tests/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: generalize options in nbd service nbd: harden service nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: Update nixos/modules/services/networking/nbd.nix Co-authored-by: pennae <82953136+pennae@users.noreply.github.com> nbd: refactor code a bit and BindPaths automatically
2022-03-06 13:49:57 +00:00
./services/networking/nbd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/ncdns.nix
ndppd module: init (#35533)
2018-05-05 05:33:20 +00:00
./services/networking/ndppd.nix
nixos/nebula: Add nebula module and unit test to lists
2021-03-05 05:28:58 +00:00
./services/networking/nebula.nix
nixos/netbird: init
2022-08-14 16:40:31 +00:00
./services/networking/netbird.nix
nixos/netclient: init
2023-07-18 21:27:34 +00:00
./services/networking/netclient.nix
nixos/networkd-dispatcher: init
2023-02-16 10:52:35 +00:00
./services/networking/networkd-dispatcher.nix
Add NetworkManager module It works but it doesn't respect ignoredInterfaces etc. Probably I forgotten to create some directories (all of them exist on my laptop). Feel free to fix this module. svn path=/nixos/trunk/; revision=33097
2012-03-15 07:19:17 +00:00
./services/networking/networkmanager.nix
nixos/nextdns: init
2020-05-02 01:49:46 +00:00
./services/networking/nextdns.nix
nftables module: Add new module for nftables firewall settings fixes #18842
2016-09-22 05:45:42 +00:00
./services/networking/nftables.nix
nixos/nghttpx: add module for the nghttpx proxy server (#31680) * nghttpx: Add a new NixOS module for the nghttpx proxy server This change also adds a global `uid` and `gid` for a `nghttpx` user and group as well as an integration test. * nixos/nghttpx: fix building manual
2017-11-16 18:21:02 +00:00
./services/networking/nghttpx/default.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/ngircd.nix
nix-serve: Add nixos module This allows sharing the Nix store of the machine as a binary cache simply by setting 'services.nix-serve.enable = true'.
2015-05-13 17:54:25 +00:00
./services/networking/nix-serve.nix
module/nix-store-gcs-proxy: init
2020-02-12 10:39:09 +00:00
./services/networking/nix-store-gcs-proxy.nix
nixos/nixops-dns: init (#34511)
2018-02-20 10:14:55 +00:00
./services/networking/nixops-dns.nix
nixos/nncp: add caller and daemon services
2023-08-14 18:58:42 +00:00
./services/networking/nncp.nix
nntp-proxy service: init
2016-02-26 14:19:46 +00:00
./services/networking/nntp-proxy.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/nomad.nix
nsd-service: add service module for nsd
2014-06-12 09:20:43 +00:00
./services/networking/nsd.nix
nixos: add ntopng service ntopng is a high-speed web-based traffic analysis and flow collection tool. Enable it by adding this to configuration.nix: services.ntopng.enable = true; Open a browser at http://localhost:3000 and login with the default username/password: admin/admin.
2013-12-05 21:21:12 +00:00
./services/networking/ntopng.nix
nixos: shuffle all ntp services into their own dir This is reckless, ill-advised, pointless, and I will be scorned for it, but it makes me feel a lot better. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-12-01 18:49:16 +00:00
./services/networking/ntp/chrony.nix
./services/networking/ntp/ntpd.nix
nixos/ntpd-rs: init
2023-10-31 14:28:49 +00:00
./services/networking/ntp/ntpd-rs.nix
nixos: shuffle all ntp services into their own dir This is reckless, ill-advised, pointless, and I will be scorned for it, but it makes me feel a lot better. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-12-01 18:49:16 +00:00
./services/networking/ntp/openntpd.nix
nixos/nullidentdmod: Init
2018-09-06 10:46:38 +00:00
./services/networking/nullidentdmod.nix
nixos: adding nylon service with uid,gid
2015-01-14 21:08:19 +00:00
./services/networking/nylon.nix
ocserv: init at 0.12.1 (#42871) `ocserv` is a VPN server which follows the openconnect protocol (https://github.com/openconnect/protocol). The packaging is slightly inspired by the AUR version (https://aur.archlinux.org/packages/ocserv/). This patch initializes the package written in C, the man pages and a module for a simple systemd unit to run the VPN server. The package supports the following authentication methods for the server: * `plain` (mostly username/password) * `pam` The third method (`radius`) is currently not supported since `nixpkgs` misses a packaged client. The module can be used like this: ``` nix { services.ocserv = { enable = true; config = '' ... ''; }; } ``` The option `services.ocserv.config` is required on purpose to ensure that nobody just enables the service and experiences unexpected side-effects on the system. For a full reference, please refer to the man pages, the online docs or the example value. The docs recommend to simply use `nobody` as user, so no extra user has been added to the internal user list. Instead a configuration like this can be used: ``` run-as-user = nobody run-as-group = nogroup ``` /cc @tenten8401 Fixes #42594
2018-08-01 19:39:09 +00:00
./services/networking/ocserv.nix
nixos/ofono: add module
2019-08-23 15:59:50 +00:00
./services/networking/ofono.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/networking/oidentd.nix
nixos/onedrive: init
2020-06-29 14:26:41 +00:00
./services/networking/onedrive.nix
nixos/openconnect: add module
2022-03-26 21:54:02 +00:00
./services/networking/openconnect.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/openvpn.nix
ostinato: add ostinato in NixOS services
2016-01-03 08:07:30 +00:00
./services/networking/ostinato.nix
owamp: adding module You can retrieve the one way latency between your client and the remote host via owping.
2018-06-05 13:15:28 +00:00
./services/networking/owamp.nix
nixos/pyload: init
2023-12-24 20:50:36 +00:00
./services/networking/pyload.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/pdns-recursor.nix
pdnsd service: init
2016-02-11 11:02:11 +00:00
./services/networking/pdnsd.nix
nixos/peroxide: add module for peroxide service
2023-01-03 22:05:34 +00:00
./services/networking/peroxide.nix
nixos/picosnitch: init
2023-04-15 02:09:48 +00:00
./services/networking/picosnitch.nix
nixos/pixiecore: init (#83406) Co-authored-by: raunovv <rauno@oyenetwork.com> Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
2020-04-02 12:06:21 +00:00
./services/networking/pixiecore.nix
nixos/pleroma: init Adding a new pleroma NixOS module and its associated documentation. co-authored-by: duponin <duponin@locahlo.st>
2020-11-08 14:05:37 +00:00
./services/networking/pleroma.nix
polipo: new service expression
2014-07-15 14:16:58 +00:00
./services/networking/polipo.nix
powerdns: init at 4.0.1 fixes #18703
2016-09-17 21:30:27 +00:00
./services/networking/powerdns.nix
nixos/pppd: init
2019-10-14 08:59:50 +00:00
./services/networking/pppd.nix
pptpd: add nixos service
2016-06-17 23:17:00 +00:00
./services/networking/pptpd.nix
added privoxy nixos module svn path=/nixos/trunk/; revision=17646
2009-10-05 15:11:32 +00:00
./services/networking/privoxy.nix
prosody: packaged as a service Conflicts: nixos/modules/misc/ids.nix
2014-09-02 15:08:56 +00:00
./services/networking/prosody.nix
Added Quassel IRC client service svn path=/nixos/trunk/; revision=22425
2010-06-28 18:36:37 +00:00
./services/networking/quassel.nix
nixos/quicktun: init
2019-04-02 10:15:12 +00:00
./services/networking/quicktun.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/quorum.nix
nixos/r53-ddns: init
2022-04-26 12:06:46 +00:00
./services/networking/r53-ddns.nix
Adding Radicale package and service
2014-05-27 20:27:31 +00:00
./services/networking/radicale.nix
* Add a module for radvd. svn path=/nixos/trunk/; revision=26035
2011-02-19 19:19:55 +00:00
./services/networking/radvd.nix
* Add the rdnss daemon. * Add the ndisc6 package to the system path if IPv6 is enabled. svn path=/nixos/trunk/; revision=26496
2011-03-24 16:23:28 +00:00
./services/networking/rdnssd.nix
redsocks module: initialize redsocks module: use separate user for redsocks daemon
2017-02-01 13:31:19 +00:00
./services/networking/redsocks.nix
resilio service: replaces btsync service, which is no longer supported upstream.
2017-06-01 14:50:17 +00:00
./services/networking/resilio.nix
nixos/modules/robustirc-bridge: init
2020-08-30 16:31:15 +00:00
./services/networking/robustirc-bridge.nix
rosenpass: refactor, add module and test (#254813)
2023-10-23 17:29:30 +00:00
./services/networking/rosenpass.nix
nixos/routedns: init Signed-off-by: Jeroen Simonetti <jeroen@simonetti.nl>
2022-06-15 06:33:46 +00:00
./services/networking/routedns.nix
Changing portmap by rpcbind on nfs services. That could make rpc.statd work. Patch by Rickard Nilsson. I'm not sure we need that netconfig file in etc. svn path=/nixos/trunk/; revision=33342
2012-03-21 20:37:37 +00:00
./services/networking/rpcbind.nix
nixos/rdma-core: add module for soft RoCE and test (#34607)
2018-02-10 07:52:03 +00:00
./services/networking/rxe.nix
* Include the Bluetooth module in module-list.nix. svn path=/nixos/trunk/; revision=23486
2010-08-27 15:32:49 +00:00
./services/networking/sabnzbd.nix
nixos/scion: init
2024-03-24 21:03:03 +00:00
./services/networking/scion/scion.nix
./services/networking/scion/scion-control.nix
./services/networking/scion/scion-daemon.nix
./services/networking/scion/scion-dispatcher.nix
./services/networking/scion/scion-router.nix
nixos/seafile: init service
2021-04-20 18:06:57 +00:00
./services/networking/seafile.nix
searx: add module
2014-03-07 19:09:59 +00:00
./services/networking/searx.nix
shadowsocks service: init
2018-04-13 10:00:10 +00:00
./services/networking/shadowsocks.nix
shairport-sync service: add module Adds a new service module for shairport-sync. Tested with a local and remote pulseaudio server. Needs to be run as a user in the pulse group to access pulseaudio.
2015-11-27 01:44:56 +00:00
./services/networking/shairport-sync.nix
nixos/shellhub-agent: initial service expression This provides the service to configure the ShellHub Agent. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2020-11-20 00:41:26 +00:00
./services/networking/shellhub-agent.nix
shorewall: init at 5.2.3.3 nixos/shorewall: init
2018-03-14 04:25:55 +00:00
./services/networking/shorewall.nix
./services/networking/shorewall6.nix
shout service: New module.
2015-07-31 23:15:18 +00:00
./services/networking/shout.nix
nixos/sing-box: init
2023-06-27 04:46:06 +00:00
./services/networking/sing-box.nix
nixos/sitespeed-io: init
2023-05-30 22:45:14 +00:00
./services/networking/sitespeed-io.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/skydns.nix
nixos/smartdns: init first generation config
2020-03-15 00:53:20 +00:00
./services/networking/smartdns.nix
smokeping: init at 2.6.11 (#17090) Includes a module for service setup and a test to verify functionality of both service and pkg.
2016-07-20 23:07:59 +00:00
./services/networking/smokeping.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/sniproxy.nix
./services/networking/snowflake-proxy.nix
softether: support SoftEther VPN 4.18
2015-08-19 07:37:20 +00:00
./services/networking/softether.nix
nixos/soju: add module
2021-05-20 17:34:20 +00:00
./services/networking/soju.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/solanum.nix
nixos/spacecookie: add service module and test
2019-05-24 19:17:51 +00:00
./services/networking/spacecookie.nix
nixos: add spiped service module Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-15 08:21:53 +00:00
./services/networking/spiped.nix
squid service: intial service based on default config
2017-03-03 22:35:31 +00:00
./services/networking/squid.nix
Generate the module-list.nix which index all valid modules. Non-valid modules are commented inside the generated list. Move module paths which are not the module directory into the legacy.nix file. svn path=/nixos/branches/modular-nixos/; revision=15751
2009-05-27 20:27:54 +00:00
./services/networking/ssh/lshd.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/ssh/sshd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/sslh.nix
nixos: add the strongswan-swanctl service The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon very similar to charon, but it's specifically designed for use with systemd. It uses the systemd libraries for a native integration. Instead of using starter and an ipsec.conf based configuration, the daemon is directly managed by systemd and configured with the swanctl configuration backend. See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd Note that the strongswan.conf and swantctl.conf configuration files are automatically generated based on NixOS options under services.strongswan-swanctl.strongswan and services.strongswan-swanctl.swanctl respectively.
2017-08-05 12:01:52 +00:00
./services/networking/strongswan-swanctl/module.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/strongswan.nix
Add stubby resolver daemon service module (#38667) * networking/stubby.nix: implementing systemd service module for stubby This change implements stubby, the DNS-over-TLS stub resolver daemon. The motivation for this change was the desire to use stubby's DNS-over-TLS funcitonality in tandem with unbound, which requires passing certain configuration parameters. This module implements those config parameters by exposing them for use in configuration.nix. * networking/stubby.nix: merging back module list re-merging the module list to remove unecessary changes. * networking/stubby.nix: removing unecessary capabilities flag This change removes the unecessary flag for toggling the capabilities which allows the daemon to bind to low ports. * networking/stubby.nix: adding debug level logging bool Adding the option to turn on debug logging. * networking/stubby.nix: clarifying idleTimeout and adding systemd target Improving docs to note that idleTimeout is expressed in ms. Adding the nss-lookup `before' target to the systemd service definition. * networking/stubby.nix: Restrict options with types.enum This change restricts fallbackProtocol and authenticationMode to accept only valid options instead of any list or str types (respectively). This change also fixes typo in the CapabilityBoundingSet systemd setting. * networking/stubby.nix: cleaning up documentation Cleaning up docs, adding literal tags to settings, and removing whitespace. * networking/stubby.nix: fixing missing linebreak in comments * networking/stubby.nix: cleaning errant comments
2018-05-16 13:16:30 +00:00
./services/networking/stubby.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/stunnel.nix
supplicant module: extended module for wpa_supplicant Add new configuration options for wpa_supplicant and allow to configure and start one wpa_supplicant per device.
2015-10-06 16:51:52 +00:00
./services/networking/supplicant.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/networking/supybot.nix
syncplay module: init
2019-09-02 21:36:30 +00:00
./services/networking/syncplay.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/syncthing-relay.nix
./services/networking/syncthing.nix
tailscale: init at 0.96-33 Signed-off-by: Martin Baillie <martin@baillie.email>
2020-03-08 06:47:50 +00:00
./services/networking/tailscale.nix
nixos/tayga: init
2021-07-05 13:00:05 +00:00
./services/networking/tayga.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/networking/tcpcrypt.nix
Add TeamSpeak 3 server & service module (close #2056) Conflicts (trivial): lib/maintainers.nix nixos/modules/misc/ids.nix
2014-03-29 00:40:30 +00:00
./services/networking/teamspeak3.nix
nixos/technitium-dns-server: init module
2024-03-24 21:28:07 +00:00
./services/networking/technitium-dns-server.nix
nixos/teleport: init
2022-01-10 12:48:56 +00:00
./services/networking/teleport.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/tetrd.nix
./services/networking/tftpd.nix
nixos/thelounge: init The Lounge is the official and community-managed fork of Shout. This intends to replace the `shout` service.
2019-07-22 16:52:20 +00:00
./services/networking/thelounge.nix
nixos/tinc: Add daemon configuration
2014-08-24 00:33:31 +00:00
./services/networking/tinc.nix
nixos/tinydns: add module with improvements suggested by Jörg Thalheim <joerg@thalheim.io>
2016-04-21 02:10:52 +00:00
./services/networking/tinydns.nix
nixos.tinyproxy: init
2023-05-05 19:00:50 +00:00
./services/networking/tinyproxy.nix
nixos/tmate-ssh-server: init module (#192270) * nixos/tmate-ssh-server: init module Co-authored-by: Aaron Andersen <aaron@fosslib.net>
2022-10-05 16:34:30 +00:00
./services/networking/tmate-ssh-server.nix
nixos: tox-bootstrapd service
2014-12-20 22:38:52 +00:00
./services/networking/tox-bootstrapd.nix
nixos/tox-node: init
2019-04-12 17:37:07 +00:00
./services/networking/tox-node.nix
toxvpn: init at 20151111 (Authored by @cleverca22)
2016-05-29 22:07:54 +00:00
./services/networking/toxvpn.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/trickster.nix
nixos/trust-dns: init Co-authored-by: Yt <happysalada@tuta.io>
2023-07-13 09:27:37 +00:00
./services/networking/trust-dns.nix
tvheadend: init at 4.0.4
2015-06-20 20:33:57 +00:00
./services/networking/tvheadend.nix
nixos/twingate: init module
2022-11-04 12:36:45 +00:00
./services/networking/twingate.nix
nixos/ucarp: init
2021-06-13 20:00:09 +00:00
./services/networking/ucarp.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/networking/unbound.nix
nixos/unifi: Add service module
2014-08-05 21:00:30 +00:00
./services/networking/unifi.nix
nixos/uptermd: init
2021-02-08 22:37:10 +00:00
./services/networking/uptermd.nix
v2ray: add v2ray service
2019-11-21 13:51:10 +00:00
./services/networking/v2ray.nix
v2raya: init at 2.0.0 Update nixos/modules/services/networking/v2raya.nix Co-authored-by: zendo <linzway@qq.com> Update nixos/modules/services/networking/v2raya.nix Co-authored-by: zendo <linzway@qq.com> Update pkgs/tools/networking/v2raya/default.nix Co-authored-by: zendo <linzway@qq.com> Update pkgs/tools/networking/v2raya/default.nix Co-authored-by: zendo <linzway@qq.com> Update nixos/modules/services/networking/v2raya.nix Co-authored-by: zendo <linzway@qq.com> Update pkgs/tools/networking/v2raya/default.nix Co-authored-by: zendo <linzway@qq.com> Update nixos/modules/services/networking/v2raya.nix Co-authored-by: zendo <linzway@qq.com>
2022-12-06 15:32:04 +00:00
./services/networking/v2raya.nix
nixos/vdirsyncer: init inspired by borgbackup
2022-02-24 10:12:23 +00:00
./services/networking/vdirsyncer.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/networking/vsftpd.nix
nixos/wasabibackend: init
2020-06-18 12:18:39 +00:00
./services/networking/wasabibackend.nix
Add websockify service
2013-02-15 02:50:41 +00:00
./services/networking/websockify.nix
wg-netmanager: init at 0.3.6 (#155149) Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
2022-02-07 15:46:51 +00:00
./services/networking/wg-netmanager.nix
nixos/webhook: init
2020-03-22 11:49:51 +00:00
./services/networking/webhook.nix
nixos/modules/networking/wg-quick Add wg-quick options support This is an implementation of wireguard support using wg-quick config generation. This seems preferrable to the existing wireguard support because it handles many more routing and resolvconf edge cases than the current wireguard support. It also includes work-arounds to make key files work. This has one quirk: We need to set reverse path checking in the firewall to false because it interferes with the way wg-quick sets up its routing.
2018-12-29 15:48:20 +00:00
./services/networking/wg-quick.nix
nixos/wgautomesh: init at 0.1.0
2023-03-29 13:04:14 +00:00
./services/networking/wgautomesh.nix
wireguard: add module fixes #17933
2016-08-23 04:34:31 +00:00
./services/networking/wireguard.nix
* A simple module for running wpa_supplicant. svn path=/nixos/branches/modular-nixos/; revision=16409
2009-07-16 21:08:32 +00:00
./services/networking/wpa_supplicant.nix
nixos/wstunnel: init
2023-04-03 22:31:23 +00:00
./services/networking/wstunnel.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/networking/x2goserver.nix
nixos/xandikos: init
2019-12-14 00:18:44 +00:00
./services/networking/xandikos.nix
* Modularised the xinetd service. tftp has been factored out into a separate module, which just declares a configuration value that causes the xinetd module to add it to xinetd.conf. Also Nixified the service declarations to abstract over the inetd implementation. * Renamed the services.xinetd.tftpd options to services.tftpd. The fact that the tftpd module uses xinetd is an implementation detail. * xinetd: use -dontfork to let Upstart monitor it, and use -syslog to get error messages at startup. svn path=/nixos/trunk/; revision=16803
2009-08-21 13:05:45 +00:00
./services/networking/xinetd.nix
xl2tpd: add nixos module for service (required adding execv to libredirect)
2016-06-20 19:54:17 +00:00
./services/networking/xl2tpd.nix
nixos/xray: init service
2022-08-23 07:48:54 +00:00
./services/networking/xray.nix
xrdp: init at 0.9.1
2017-01-05 23:14:35 +00:00
./services/networking/xrdp.nix
nixos/yggdrasil: add service
2019-06-27 15:56:10 +00:00
./services/networking/yggdrasil.nix
zerobin service : init
2016-04-20 07:32:11 +00:00
./services/networking/zerobin.nix
nixos/zeronet: init (#44842)
2018-08-31 10:40:23 +00:00
./services/networking/zeronet.nix
zerotier-one: service add
2015-06-07 04:10:52 +00:00
./services/networking/zerotierone.nix
nixos/znc: move to own folder Move legacy options to separate file
2018-08-21 19:05:20 +00:00
./services/networking/znc/default.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/printing/cupsd.nix
nixos/ipp-usb: add module
2022-11-25 12:00:00 +00:00
./services/printing/ipp-usb.nix
nixos/cups-pdf: init Some implementation notes: * cups-pdf, and cups-pdf-to-pdf, support multiple instances with differing configurations. This can be accomplished by creating multiple configuration files with names `cups-pdf-{instance-name}.conf`. The Nixos module supports this feature by providing the option `instances` which is an attrset mapping instance names to instance configurations. To simplify module usage, an instance `pdf` is created by default. * To use a cups-pdf instance, one also needs a cups queue that connects to the backend. The module does this automatically by default, using the `hardware.printers.ensurePrinters`. It uses one of the ppd files which is included in the cups-pdf package. If this isn't desired (e.g. because printer queues should be created by hand, or configured differently), the `installPrinter` option can be turned off (for each instance separately). * In our configuration, cups calls external programs using the `cups` account and the `lp` group. cups-pdf refuses to operate without root privileges, likely because it needs to change the ownership of it output pdf files so that (only) the print job's owner can access them. The module installs a suid root wrapper for the backend program that can only be called by the `lp` group. The cups-pdf package is replaced by a wrapper package which calls the suid root wrapper. So cups can call its backend programs as usual.
2022-07-19 17:42:28 +00:00
./services/printing/cups-pdf.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/scheduling/atd.nix
./services/scheduling/cron.nix
./services/scheduling/fcron.nix
elasticsearch-curator: include the module in the module-list & fix bug
2018-08-21 15:24:52 +00:00
./services/search/elasticsearch-curator.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/search/elasticsearch.nix
hound: init module
2016-10-12 22:58:56 +00:00
./services/search/hound.nix
nixos/meilisearch: init Reviewed-by: Aaron Andersen <aanderse@users.noreply.github.com> (cherry picked from commit 5844ea85c3ad96b8a2df9da50374c530e86a904d)
2020-04-07 08:43:33 +00:00
./services/search/meilisearch.nix
nixos/opensearch: init module
2023-02-14 17:15:42 +00:00
./services/search/opensearch.nix
qdrant: service module init
2023-02-26 06:08:53 +00:00
./services/search/qdrant.nix
nixos/sonic-server: init
2023-11-10 13:52:03 +00:00
./services/search/sonic-server.nix
nixos/typesense: init at 0.24.1
2023-07-18 22:29:30 +00:00
./services/search/typesense.nix
nixos/aesmd: add module Co-authored-by: Alex Zero <joseph@marsden.space>
2021-11-25 13:37:51 +00:00
./services/security/aesmd.nix
authelia: move module under security and minor fixes Fixed test access to lib Added nixos test to passthru
2023-03-27 11:00:07 +00:00
./services/security/authelia.nix
nixos/bitwarden-directory-connector: init at version Added the module to use bitwarden-directory-connector.
2023-11-06 05:59:02 +00:00
./services/security/bitwarden-directory-connector-cli.nix
nixos/certmgr: init
2018-08-06 12:28:52 +00:00
./services/security/certmgr.nix
nixos/cfssl: init - based on module originally written by @srhb - complies with available options in cfssl v1.3.2 - uid and gid 299 reserved in ids.nix - added simple nixos test case
2018-07-26 14:25:34 +00:00
./services/security/cfssl.nix
ClamAV: package virus fingerprint database updater.
2012-07-23 14:18:19 +00:00
./services/security/clamav.nix
nixos/endlessh-go: init module
2022-09-23 20:39:38 +00:00
./services/security/endlessh-go.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/security/endlessh.nix
esdm: init at 0.6.0 Signed-off-by: Oliver Richter <richter-oliver@gmx.net>
2023-06-01 13:24:01 +00:00
./services/security/esdm.nix
nixos: add fail2ban to module-list.nix Now that the fail2ban service has the ".enable" option, I think it's time to add it to the module list, so that we can enable it in configuration.nix like this: services.fail2ban.enable = true;
2014-08-12 19:27:00 +00:00
./services/security/fail2ban.nix
nixos/fprintd: add service and pam support
2015-01-03 16:47:38 +00:00
./services/security/fprintd.nix
haka: options for nixos
2016-01-18 04:54:19 +00:00
./services/security/haka.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/security/haveged.nix
nixos/hockeypuck: Add service for hockeypuck
2021-07-18 06:49:36 +00:00
./services/security/hockeypuck.nix
hologram: 8d86e3f -> d20d1c3 - Updates dependencies - Adds configuration module - Tested on Nixos Unstable
2017-02-01 16:26:55 +00:00
./services/security/hologram-agent.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/security/hologram-server.nix
nixos/infnoise: init
2022-05-06 07:22:46 +00:00
./services/security/infnoise.nix
nixos/intune: init
2023-03-17 08:39:03 +00:00
./services/security/intune.nix
jitterentropy-rngd: init at 1.2.8 Add jitterentropy-rngd, a tool similar to rng-tools. While not necessarily needed, it is useful for those who want to strengthen their kernel entropy input pool by periodic insertion of an independent source. The entropy source is a NIST SP800-90B compliant non-physical true RNG source on most systems. See the jitterentropy documentation for details (http://chronox.de/jent/doc/CPU-Jitter-NPTRNG.pdf). Signed-off-by: Markus Theil <theil.markus@gmail.com>
2023-10-10 18:56:45 +00:00
./services/security/jitterentropy-rngd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/security/kanidm.nix
munge: add service
2015-02-28 21:23:07 +00:00
./services/security/munge.nix
nixos: add nginx-sso service
2018-12-28 08:53:39 +00:00
./services/security/nginx-sso.nix
Add module for oauth2_proxy
2016-05-06 19:54:51 +00:00
./services/security/oauth2_proxy.nix
oauth2_proxy: add nginx vhost module
2018-06-29 14:36:03 +00:00
./services/security/oauth2_proxy_nginx.nix
Opensnitch: Add module
2021-08-01 14:06:53 +00:00
./services/security/opensnitch.nix
pass-secret-service: unstable-2020-04-12 -> unstable-2022-03-21 * Update to the latest upstream version of pass-secret-service that includes systemd service files. * Add patch to fix use of a function that has been removed from the Python Cryptography library in NixOS 22.05 * Install systemd service files in the Nix package. * Add NixOS test to ensure the D-Bus API activates the service unit. * Add myself as a maintainer to the package and NixOS test. * Use checkTarget instead of equivalent custom checkPhase.
2022-04-16 05:18:57 +00:00
./services/security/pass-secret-service.nix
nixos: add physlock service
2015-04-21 00:13:42 +00:00
./services/security/physlock.nix
Add Shibboleth Service Provider Module
2017-05-02 00:01:39 +00:00
./services/security/shibboleth-sp.nix
sks and pgpkeyserver-lite modules: init (#27515) * modules sks and pgpkeyserver-lite: runs the sks keyserver with optional nginx proxy for webgui. * Add calbrecht to maintainers * module sks: fix default hkpAddress value * module pgpkeyserver-lite: make hkpAddress a string type option and use (builtins.head services.sks.hkpAddress) as default value * module sks: remove leftover service dependencies
2017-08-22 10:27:00 +00:00
./services/security/sks.nix
sshguard: new package
2017-03-07 15:50:33 +00:00
./services/security/sshguard.nix
nixos/sslmate-agent: add to module-list
2022-04-01 13:23:45 +00:00
./services/security/sslmate-agent.nix
nixos/step-ca: Add declarative step-ca service Co-authored-by: midchildan <git@midchildan.org>
2021-02-06 20:04:21 +00:00
./services/security/step-ca.nix
nixos/tang: create module for tang server (#247037) This commit adds a module for the tang server and the related nixos test.
2023-10-16 11:10:15 +00:00
./services/security/tang.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/security/tor.nix
sshguard: new package
2017-03-07 15:50:33 +00:00
./services/security/torify.nix
Replacing tsocks with torsocks. tsocks leaks DNS requests and is less secure than torsocks. torsocks is a fork of tsocks that is patched specifically for Tor. svn path=/nixos/trunk/; revision=24012
2010-10-01 03:41:43 +00:00
./services/security/torsocks.nix
nixos/usbguard: create package and module (#28363) * nixos/usbguard: create package and module No usbguard module or package existed for NixOS previously. USBGuard will protect you from BadUSB attacks. (assuming configuration is done correctly) * nixos/usbguard: remove extra packages Users can override this by themselves. * nixos/usbguard: add maintainer and fix style
2017-08-25 22:35:18 +00:00
./services/security/usbguard.nix
Vault: 0.6.5 -> 0.7.2 with services
2017-06-07 20:31:40 +00:00
./services/security/vault.nix
nixos/{consul-template,vault-agent}: init
2023-02-14 21:36:15 +00:00
./services/security/vault-agent.nix
vaultwarden: update to 1.22.1, rename from bitwarden_rs I tried to make this as non-breaking as possible, but it will still break things slightly for people expecting certain file names in the packages themselves.
2021-07-01 09:14:51 +00:00
./services/security/vaultwarden/default.nix
yubikey-agent: init at 0.1.3 This adds yubikey-agent as a package and a nixos module. On macOS, we use `wrapProgram` to set pinentry_mac as default in PATH; on Linux we rely on the user to set their preferred pinentry in PATH. In particular, we use a systemd override to prefix PATH to select a chosen pinentry program if specified. On Linux, we need libnotify to provide the notify-send utility for desktop notifications (such as "Waiting for Yubikey touch..."). This might work on other flavors of unix, but I haven't tested. We reuse the programs.gnupg.agent.pinentryFlavor option for yubikey-agent, but in doing so I hit a problem: pinentryFlavour's default value is specified in a mkDefault, but only conditionally. We ought to be able to pick up the pinentryFlavour whether or not gpg-agent is running. As a result, this commit moves the default value to the definition of programs.gnupg.agent.enable.
2020-07-09 21:18:24 +00:00
./services/security/yubikey-agent.nix
automatic-timezoned: init at 1.0.41
2022-10-08 20:16:33 +00:00
./services/system/automatic-timezoned.nix
nixos/bpftune: init
2023-06-29 02:25:41 +00:00
./services/system/bpftune.nix
nixos: add cachix-agent service
2022-01-14 13:54:42 +00:00
./services/system/cachix-agent/default.nix
nixos/cachix-watch-store: fix missing reference to the module I forgot to add the module to the list when I have added the module (dc529302fecd1a4cfec568524135da1a49f5640b)
2022-11-02 16:00:45 +00:00
./services/system/cachix-watch-store.nix
Added the cloud-init service
2014-10-17 15:01:12 +00:00
./services/system/cloud-init.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/system/dbus.nix
earlyoom service: init
2017-03-24 22:16:16 +00:00
./services/system/earlyoom.nix
kerberos-server: add kerberos option Allow switching out kerberos server implementation. Sharing config is probably sensible, but implementation is different enough to be worth splitting into two files. Not sure this is the correct way to split an implementation, but it works for now. Uses the switch from config.krb5 to select implementation.
2017-11-06 17:41:34 +00:00
./services/system/kerberos/default.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/system/localtimed.nix
nixos/nix-daemon: Move to services/system It is now only about the system service. Granted, it also installs the client package, but that could be factored out later, with actual test to support such a new type of configuration.
2023-07-05 12:59:01 +00:00
./services/system/nix-daemon.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/system/nscd.nix
cyrus-sasl: Add saslauthd service support
2017-06-06 10:59:47 +00:00
./services/system/saslauthd.nix
nixos/self-deploy: init (#120940) Add `self-deploy` service to facilitate continuous deployment of NixOS configuration from a git repository.
2021-05-18 15:29:37 +00:00
./services/system/self-deploy.nix
nixos/systembus-notify: add support for system services notifying users
2021-07-12 07:34:26 +00:00
./services/system/systembus-notify.nix
nixos/systemd-lock-handler: init
2023-10-05 14:52:07 +00:00
./services/system/systemd-lock-handler.nix
* added uptimed module svn path=/nixos/trunk/; revision=17173
2009-09-16 07:48:47 +00:00
./services/system/uptimed.nix
nixos/zram-generator: init
2023-08-13 07:36:23 +00:00
./services/system/zram-generator.nix
Add deluge and deluge web services
2013-02-24 16:33:48 +00:00
./services/torrent/deluge.nix
flexget nixos module: run the service and specify configuration This module adds support for defining a flexget service. Due to flexget insisting on being able to write all over where it finds its configuration file, we use a ExecStartPre hook to copy the generated configuration file into place under the user's home. It's fairly ugly and I'm very open to suggestions
2016-03-26 14:41:30 +00:00
./services/torrent/flexget.nix
nixos/magnetico: init service
2019-08-26 09:33:44 +00:00
./services/torrent/magnetico.nix
opentracker service: init
2016-10-02 21:41:48 +00:00
./services/torrent/opentracker.nix
nixos: add peerflix module
2014-12-01 15:40:42 +00:00
./services/torrent/peerflix.nix
nixos/rtorrent: add service
2020-03-24 11:45:50 +00:00
./services/torrent/rtorrent.nix
Add Transmission BitTorrent service Enable it with services.transmission.enable = true; and optionally configure it services.transmission.settings = { download-dir = "/srv/torrents/"; incomplete-dir = "/srv/torrents/.incomplete/"; incomplete-dir-enabled = true; rpc-whitelist = "127.0.0.1,192.168.*.*"; # for users in group "transmission" to have access to torrents umask = 2; }; The above settings are written/merged into settings.json each time the service is about to start.
2013-03-01 20:12:38 +00:00
./services/torrent/transmission.nix
nixos/torrentstream: init
2023-10-17 17:08:52 +00:00
./services/torrent/torrentstream.nix
nixos: add module for tempo It's very barebones but should be OK for now.
2022-06-19 14:08:48 +00:00
./services/tracing/tempo.nix
nixos/getty: rename from services.mingetty It's been 8.5 years since NixOS used mingetty, but the option was never renamed (despite the file definining the module being renamed in 9f5051b76c1 ("Rename mingetty module to agetty")). I've chosen to rename it to services.getty here, rather than services.agetty, because getty is implemantation-neutral and also the name of the unit that is generated.
2021-01-05 08:25:53 +00:00
./services/ttys/getty.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/ttys/gpm.nix
Add module to use kmscon instead of linux-console for VTs This required some changes to systemd unit handling: * Add an option to specify that a unit is just a symlink * Allow specified units to overwrite systemd-provided ones * Have gettys.target require autovt@1.service instead of getty@1.service Signed-off-by: Shea Levy <shea@shealevy.com>
2014-01-15 11:58:16 +00:00
./services/ttys/kmscon.nix
nixos/epgstation: add module
2020-08-10 14:45:08 +00:00
./services/video/epgstation/default.nix
nixos/go2rtc: init
2023-02-07 22:09:49 +00:00
./services/video/go2rtc/default.nix
nixos/frigate: init
2023-03-30 11:04:55 +00:00
./services/video/frigate.nix
video/mirakurun: add module
2020-08-10 14:39:47 +00:00
./services/video/mirakurun.nix
nixos/photonvision: init module
2024-02-06 07:43:41 +00:00
./services/video/photonvision.nix
nixos/replay-sorcery: add module
2021-05-14 22:01:02 +00:00
./services/video/replay-sorcery.nix
rtsp-simple-server: rebrand as mediamtx
2023-04-11 15:02:48 +00:00
./services/video/mediamtx.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/video/unifi-video.nix
nixos/v4l2-relayd: init
2023-04-08 13:06:22 +00:00
./services/video/v4l2-relayd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/wayland/cage.nix
nixos/akkoma: init
2022-09-23 13:54:14 +00:00
./services/web-apps/akkoma.nix
nixos/alps: init module
2022-09-16 19:45:29 +00:00
./services/web-apps/alps.nix
nixos/anuko-time-tracker: init
2023-06-27 10:30:06 +00:00
./services/web-apps/anuko-time-tracker.nix
confluence module: init
2016-10-09 09:45:10 +00:00
./services/web-apps/atlassian/confluence.nix
crowd module: init
2016-10-11 13:21:43 +00:00
./services/web-apps/atlassian/crowd.nix
jira module: init
2016-10-09 10:26:25 +00:00
./services/web-apps/atlassian/jira.nix
audiobookshelf: init module
2023-09-29 09:46:13 +00:00
./services/web-apps/audiobookshelf.nix
nixos/bookstack: init
2021-01-18 07:37:28 +00:00
./services/web-apps/bookstack.nix
nixos/c2fmzq-server: init module Co-authored-by: Peder Bergebakken Sundt <pbsds@hotmail.com> Co-authored-by: Anselm Schüler <mail@anselmschueler.com> Co-authored-by: h7x4 <h7x4@nani.wtf>
2023-10-01 20:09:24 +00:00
./services/web-apps/c2fmzq-server.nix
nixos/calibre-web: init module
2021-02-23 11:23:20 +00:00
./services/web-apps/calibre-web.nix
nixos/castopod: fix startup, displaying images, uploads up to 500 MiB - new maxUploadSize option - new dataDir option (with ReadWritePaths systemd support) - admin page reports correct free disk space (instead of /nix/store) - fix example configuration in documentation - now podcast creation and file upload are tested during NixOS test - move castopod from audio to web-apps folder - verbose logging from the browser test
2023-10-03 18:19:36 +00:00
./services/web-apps/castopod.nix
nixos/coder: init module
2022-10-24 20:08:00 +00:00
./services/web-apps/coder.nix
nixos/changedetection-io: init
2022-10-18 01:04:25 +00:00
./services/web-apps/changedetection-io.nix
chatgpt-retrieval-plugin: init module
2023-04-02 00:31:05 +00:00
./services/web-apps/chatgpt-retrieval-plugin.nix
nixos/cloudlog: init
2023-01-01 23:19:37 +00:00
./services/web-apps/cloudlog.nix
Revert "code-server: drop" This reverts commit 72911a99d34a4d290671728d40016ba5254f72fe.
2023-12-19 14:40:57 +00:00
./services/web-apps/code-server.nix
nixos/convos: init
2020-06-05 12:53:24 +00:00
./services/web-apps/convos.nix
nixos/crabfit: init
2024-04-02 10:16:53 +00:00
./services/web-apps/crabfit.nix
nixos/davis: init
2024-03-25 14:32:01 +00:00
./services/web-apps/davis.nix
dex-oidc: add module
2021-09-19 23:43:54 +00:00
./services/web-apps/dex.nix
nixos/discourse: Init
2021-04-04 11:42:18 +00:00
./services/web-apps/discourse.nix
documize-community: init at 2.2.1 Documize is an open-source alternative for wiki software like Confluence based on Go and EmberJS. This patch adds the sources for the community edition[1], for commercial their paid-plan[2] needs to be used. For commercial use a derivation that bundles the commercial package and contains a `$out/bin/documize` can be passed to `services.documize.enable`. The package compiles the Go sources, the build process also bundles the pre-built frontend from `gui/public` into the binary. The NixOS module generates a simple `systemd` unit which starts the service as a dynamic user, database and a reverse proxy won't be configured. [1] https://www.documize.com/get-started/ [2] https://www.documize.com/pricing/
2019-03-26 18:04:28 +00:00
./services/web-apps/documize.nix
nixos/dokuwiki: init module at 2018-04-22b
2019-12-25 22:04:55 +00:00
./services/web-apps/dokuwiki.nix
nixos/dolibarr: init Co-authored: Ryan Lahfa <masterancpp@gmail.com>
2022-08-14 14:03:42 +00:00
./services/web-apps/dolibarr.nix
nixos/engelsystem: init
2020-04-08 07:49:56 +00:00
./services/web-apps/engelsystem.nix
ethercalc: init at latest master (b19627)
2022-01-16 18:58:00 +00:00
./services/web-apps/ethercalc.nix
nixos/fluidd: init fluidd service at 1.16.2
2021-08-21 20:51:01 +00:00
./services/web-apps/fluidd.nix
freshrss: init at 1.20.0, tests and module
2022-09-07 19:06:44 +00:00
./services/web-apps/freshrss.nix
galene: init at 0.2
2020-12-30 20:22:51 +00:00
./services/web-apps/galene.nix
nixos: add gerrit module Co-authored-by: edef <edef@edef.eu> Co-authored-by: Florian Klink <flokli@flokli.de>
2020-03-05 21:11:28 +00:00
./services/web-apps/gerrit.nix
nixos/gotify: init module and test
2019-10-25 13:14:57 +00:00
./services/web-apps/gotify-server.nix
nixos/gotosocial: init Co-authored-by: Peder Bergebakken Sundt <pbsds@hotmail.com>
2023-05-19 18:18:17 +00:00
./services/web-apps/gotosocial.nix
nixos/grocy: init module Co-authored-by: elseym <elseym@me.com>
2020-02-07 22:30:40 +00:00
./services/web-apps/grocy.nix
nixos/pixelfed: init module
2022-09-13 16:47:43 +00:00
./services/web-apps/pixelfed.nix
nixos/guacamole-client: init
2023-06-16 17:11:59 +00:00
./services/web-apps/guacamole-client.nix
nixos/guacamole-server: init
2023-06-16 17:12:42 +00:00
./services/web-apps/guacamole-server.nix
healthchecks: init at 2.2.1
2022-06-10 12:31:00 +00:00
./services/web-apps/healthchecks.nix
nixos/codimd: rename to hedgedoc CodiMD was renamed to HedgeDoc. The user, group and state directory, will be named hedgedoc instead of codimd, starting with stateVersion "21.03".
2020-11-29 17:51:50 +00:00
./services/web-apps/hedgedoc.nix
nixos/hledger-web: init module and test
2020-01-20 11:34:57 +00:00
./services/web-apps/hledger-web.nix
nixos/modules/honk: init
2023-08-17 16:08:48 +00:00
./services/web-apps/honk.nix
nixos/icingaweb2: Init the module The module is indeed very large but allows configuring every aspect of icingaweb2. The built-in monitoring module is in an own file because there are actually more (third-party) modules and this structure means every module can get an own file.
2019-02-17 18:08:47 +00:00
./services/web-apps/icingaweb2/icingaweb2.nix
./services/web-apps/icingaweb2/module-monitoring.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/invidious.nix
./services/web-apps/invoiceplane.nix
isso: added NixOS module to configure `isso` in NixOS
2021-08-07 06:32:06 +00:00
./services/web-apps/isso.nix
nixos/jirefeau: add `services.jirafeau` module Signed-off-by: David Wood <david.wood@codeplay.com>
2020-02-06 16:00:19 +00:00
./services/web-apps/jirafeau.nix
nixos/jitsi-meet: init
2020-03-18 03:23:15 +00:00
./services/web-apps/jitsi-meet.nix
kasmweb: init at 1.12.0
2022-12-29 06:05:41 +00:00
./services/web-apps/kasmweb/default.nix
nixos/kavita: init
2023-04-30 03:26:37 +00:00
./services/web-apps/kavita.nix
nixos/keycloak: Init
2020-10-05 13:58:44 +00:00
./services/web-apps/keycloak.nix
nixos/komga: add module
2022-08-12 21:52:52 +00:00
./services/web-apps/komga.nix
nixos/lanraragi: init
2023-09-17 15:12:55 +00:00
./services/web-apps/lanraragi.nix
nixos/lemmy: init Co-authored-by: Raphael Megzari <raphael@megzari.com>
2021-09-23 14:27:42 +00:00
./services/web-apps/lemmy.nix
nixos/limesurvey: init module to replace apache subservice
2019-03-06 12:41:18 +00:00
./services/web-apps/limesurvey.nix
nixos/mainsail: init
2023-05-07 05:40:51 +00:00
./services/web-apps/mainsail.nix
nixos/mastodon: init Co-authored-by: Happy River <happyriver93@runbox.com> Co-authored-by: ash lea <ashkitten@users.noreply.github.com> Co-authored-by: Justin Humm <justin.humm@posteo.de>
2019-05-02 14:51:12 +00:00
./services/web-apps/mastodon.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/matomo.nix
mattermost service: init
2016-08-15 01:17:53 +00:00
./services/web-apps/mattermost.nix
nixos/mealie: init module Signed-off-by: Litchi Pi <litchi.pi@proton.me>
2024-02-01 07:30:12 +00:00
./services/web-apps/mealie.nix
nixos/mediawiki: init service to replace httpd subservice
2019-06-06 01:19:11 +00:00
./services/web-apps/mediawiki.nix
nixos/meme-bingo-web: init service
2023-09-07 08:33:27 +00:00
./services/web-apps/meme-bingo-web.nix
nixos/microbin: add module
2023-10-15 21:58:52 +00:00
./services/web-apps/microbin.nix
miniflux: add service
2018-12-21 18:36:58 +00:00
./services/web-apps/miniflux.nix
nixos/monica: init
2023-04-16 09:21:57 +00:00
./services/web-apps/monica.nix
nixos/moodle: init service
2019-06-21 14:09:15 +00:00
./services/web-apps/moodle.nix
nixos/movim: add service module
2024-03-22 16:49:50 +00:00
./services/web-apps/movim.nix
netbox: init module
2022-03-05 18:25:21 +00:00
./services/web-apps/netbox.nix
nixos/nextcloud: init Co-authored-by: Franz Pletz <fpletz@fnordicwalking.de> Co-authored-by: Robin Gloster <mail@glob.in> Co-authored-by: Janne Heß <janne@hess.ooo> Co-authored-by: Florian Klink <flokli@flokli.de>
2018-06-29 17:17:54 +00:00
./services/web-apps/nextcloud.nix
nixos/nextcloud-notify_push: init
2022-12-13 20:08:00 +00:00
./services/web-apps/nextcloud-notify_push.nix
nexus: Add module for nexus. Add also myself as maintainer Add simple test of the nexus service
2017-09-01 16:24:20 +00:00
./services/web-apps/nexus.nix
nixos/nifi: init service
2021-10-30 17:04:55 +00:00
./services/web-apps/nifi.nix
nixos/node-red: add module Adds a basic nixos module/service for node-red based on nodePackages.node-red Co-authored-by: Aaron Andersen <aaron@fosslib.net> Co-authored-by: Sandro <sandro.jaeckel@gmail.com> Co-authored by: Adrian Parvin Ouano <adrianparvino@gmail.com> Co-authored-by: Norbert Melzer <nmelzer@nobbz.dev>
2021-03-17 21:27:15 +00:00
./services/web-apps/node-red.nix
nixos/ocis: init at 5.0.0 Co-authored-by: Casey Link <unnamedrambler@gmail.com>
2024-03-18 12:29:16 +00:00
./services/web-apps/ocis.nix
nixos/onlyoffice: init
2022-07-11 01:48:00 +00:00
./services/web-apps/onlyoffice.nix
nixos/openvscode-server: init
2023-05-15 13:33:31 +00:00
./services/web-apps/openvscode-server.nix
mobilizon: init at 3.1.3 Co-Authored-By: Minijackson <minijackson@riseup.net> Co-Authored-By: summersamara <summersamara@proton.me>
2023-09-05 15:53:09 +00:00
./services/web-apps/mobilizon.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/openwebrx.nix
./services/web-apps/outline.nix
nixos/peering-manager: init
2022-12-01 16:31:48 +00:00
./services/web-apps/peering-manager.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/peertube.nix
./services/web-apps/pgpkeyserver-lite.nix
./services/web-apps/phylactery.nix
nixos/photoprism: init module
2023-01-14 23:15:50 +00:00
./services/web-apps/photoprism.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/pict-rs.nix
plantuml-server: init at 1.2020.14
2020-07-08 15:55:37 +00:00
./services/web-apps/plantuml-server.nix
plausible: init at 1.3.0
2021-05-21 21:15:23 +00:00
./services/web-apps/plausible.nix
powerdns-admin: fix and add module - Add the migrations directory to the package - Add postgres support to the package - Add a service for powerdns-admin Co-authored-by: Zhaofeng Li <hello@zhaofeng.li>
2021-12-17 09:33:40 +00:00
./services/web-apps/powerdns-admin.nix
nixos/pretalx: init
2023-05-13 15:35:53 +00:00
./services/web-apps/pretalx.nix
nixos/pretix: init
2024-03-13 00:55:11 +00:00
./services/web-apps/pretix.nix
prosody-filer service: init Add user and group, as files stored are persistent and to be accessed by nginx or other web server.
2022-01-08 10:36:29 +00:00
./services/web-apps/prosody-filer.nix
rimgo: add module
2023-09-13 12:06:11 +00:00
./services/web-apps/rimgo.nix
nixos/sftpgo: init A fully featured and highly configurable SFTP server with optional HTTP/S, FTP/S and WebDAV support. https://github.com/drakkan/sftpgo
2023-04-19 13:13:47 +00:00
./services/web-apps/sftpgo.nix
nixos/suwayomi-server: init at 0.7.0
2024-01-18 21:10:47 +00:00
./services/web-apps/suwayomi-server.nix
nixos/rss-bridge: init
2020-08-13 17:51:03 +00:00
./services/web-apps/rss-bridge.nix
selfoss service: init
2016-09-09 12:09:57 +00:00
./services/web-apps/selfoss.nix
nixos/shiori: init with test
2019-09-22 15:54:16 +00:00
./services/web-apps/shiori.nix
nixos/silverbullet: init module
2024-03-16 16:11:59 +00:00
./services/web-apps/silverbullet.nix
slskd: init module (#233648) * slskd: init module * Update nixos/modules/services/web-apps/slskd.nix * Update nixos/modules/services/web-apps/slskd.nix * add description to slskd module options --------- Co-authored-by: ppom <ppom@ppom.me> Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
2023-07-17 16:40:54 +00:00
./services/web-apps/slskd.nix
nixos/snipe-it: init Snipe-IT is a free open source IT asset/license management system https://snipeitapp.com/
2022-02-08 10:44:46 +00:00
./services/web-apps/snipe-it.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/sogo.nix
./services/web-apps/trilium.nix
./services/web-apps/tt-rss.nix
nixos/vikunja: init nixos/vikunka: Use RFC 0042 settings proposal (thanks to @aanderse)
2021-06-11 17:54:13 +00:00
./services/web-apps/vikunja.nix
nixos/whitebophir: init
2021-01-13 00:25:29 +00:00
./services/web-apps/whitebophir.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-apps/wiki-js.nix
nixos/windmill: init module
2023-12-05 02:42:28 +00:00
./services/web-apps/windmill.nix
nixos/wordpress: create module to replace the httpd subservice
2019-06-02 14:36:14 +00:00
./services/web-apps/wordpress.nix
nixos/writefreely: init
2022-06-26 05:08:43 +00:00
./services/web-apps/writefreely.nix
module-list: add youtrack module to list
2018-05-15 15:34:31 +00:00
./services/web-apps/youtrack.nix
nixos/zabbixWeb: replace httpd subservice with new module
2019-07-11 22:44:51 +00:00
./services/web-apps/zabbix.nix
zitadel: init at 2.37.2; nixos/zitadel: init (#254896)
2023-10-03 05:11:18 +00:00
./services/web-apps/zitadel.nix
nixos/agate: init
2022-02-07 16:03:44 +00:00
./services/web-servers/agate.nix
Generate the module-list.nix which index all valid modules. Non-valid modules are commented inside the generated list. Move module paths which are not the module directory into the legacy.nix file. svn path=/nixos/branches/modular-nixos/; revision=15751
2009-05-27 20:27:54 +00:00
./services/web-servers/apache-httpd/default.nix
caddy: add virtualHosts stub
2021-08-19 14:50:55 +00:00
./services/web-servers/caddy/default.nix
nixos darkhttpd: module to enable darkhttpd
2018-04-02 03:33:07 +00:00
./services/web-servers/darkhttpd.nix
fcgiwrap: new package Simple server for running CGI applications over FastCGI https://nginx.localdomain.pl/wiki/FcgiWrap
2014-05-10 16:37:58 +00:00
./services/web-servers/fcgiwrap.nix
services/garage: init
2022-09-07 20:04:27 +00:00
./services/web-servers/garage.nix
hitch: init at 1.4.8 + service + test (#39358) Add the Hitch TLS reverse proxy as an option for TLS termination.
2018-05-01 09:36:36 +00:00
./services/web-servers/hitch/default.nix
nixos/hydron: init
2018-07-10 23:10:02 +00:00
./services/web-servers/hydron.nix
* Fix the jboss module. svn path=/nixos/trunk/; revision=26992
2011-04-27 13:33:06 +00:00
./services/web-servers/jboss/default.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-servers/keter
lighttpd: add cgit sub-service (cgit is "a hyperfast web frontend for git repositories written in C") cgit is enabled like this (assuming lighttpd is already enabled): services.lighttpd.cgit.enable = true; and configured verbatim like this (contents of the cgitrc file): services.lighttpd.cgit.configText = '' cache-size=1000 scan-path=/srv/git ''; cgit will be available from this URL: http://yourserver/cgit In lighttpd, I've ensured that the cache dir for cgit is created if cgit is enabled.
2013-05-31 21:53:13 +00:00
./services/web-servers/lighttpd/cgit.nix
lighttpd: add collectd submodule
2017-06-29 22:21:16 +00:00
./services/web-servers/lighttpd/collectd.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/web-servers/lighttpd/default.nix
lighttpd: add gitweb as a sub-service Now you can access gitweb at http://yourserver/gitweb by simply adding this to configuration.nix (assuming services.lighttpd.enable = true); services.lighttpd.gitweb.enable = true; The path to all bare repositories served by gitweb can be set with this option (default value below): services.lighttpd.gitweb.projectroot = "/srv/git"; Based on patch contributed by Bjørn Forsman.
2013-05-06 10:49:29 +00:00
./services/web-servers/lighttpd/gitweb.nix
nixos/merecat: init
2022-10-19 08:49:57 +00:00
./services/web-servers/merecat.nix
nixos/mighttpd2: init
2018-01-04 17:19:54 +00:00
./services/web-servers/mighttpd2.nix
minio service: add inital service features: - change listen port and address - configure config and data directory - basic test to check if minio server starts
2017-06-25 16:43:10 +00:00
./services/web-servers/minio.nix
nixos/molly-brown: init
2020-07-21 21:20:27 +00:00
./services/web-servers/molly-brown.nix
add most basic nginx service
2013-03-02 22:40:56 +00:00
./services/web-servers/nginx/default.nix
nixos/nginx: add gitweb sub-service
2018-03-27 16:42:13 +00:00
./services/web-servers/nginx/gitweb.nix
nixos/nginx/tailscale-auth: init module
2023-09-14 11:27:39 +00:00
./services/web-servers/nginx/tailscale-auth.nix
phpfpm service: restructured pool configuration From @fpletz: Keep poolConfigs option for backwards-compatibility. The original commit 6b3f5b5a421fe3422e9ef63a3fd690178c36163e was previously reverted by c7860cae1a4b54f4b54339142472f00f861fa055 but the issues were resolved.
2016-06-19 21:42:26 +00:00
./services/web-servers/phpfpm/default.nix
nixos/pomerium: init
2021-01-08 03:02:47 +00:00
./services/web-servers/pomerium.nix
nixos/rustus: inital module
2023-06-20 19:44:25 +00:00
./services/web-servers/rustus.nix
nixos/stargazer: init
2023-04-16 23:24:06 +00:00
./services/web-servers/stargazer.nix
nixos/static-web-server: create module which uses upstream systemd units This commit creates a nixos module for static-web-server. The module uses upstream systemd units to start static-web-server. It also includes options for configuring static-web-server.
2023-07-01 16:17:39 +00:00
./services/web-servers/static-web-server.nix
Generate the module-list.nix which index all valid modules. Non-valid modules are commented inside the generated list. Move module paths which are not the module directory into the legacy.nix file. svn path=/nixos/branches/modular-nixos/; revision=15751
2009-05-27 20:27:54 +00:00
./services/web-servers/tomcat.nix
nixos/traefik create service
2017-09-27 16:30:49 +00:00
./services/web-servers/traefik.nix
nixos/trafficserver: avoid input from derivation Using builtins.readFile to load upstream defaults is a clever trick, but it's not allowed in restricted evaluation mode: which means it fails on Hydra, for example. Besides - in Nixpkgs - depending on derivation as inputs is considered bad practice and should be avoided.
2021-09-23 06:54:25 +00:00
./services/web-servers/trafficserver/default.nix
nixos/ttyd: init
2019-09-12 17:47:15 +00:00
./services/web-servers/ttyd.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/web-servers/unit/default.nix
uwsgi: add nixos module
2014-12-10 01:41:25 +00:00
./services/web-servers/uwsgi.nix
Add varnish to module-list.nix
2013-05-15 12:36:17 +00:00
./services/web-servers/varnish/default.nix
clight: include module
2019-07-04 16:34:49 +00:00
./services/x11/clight.nix
xiccd: init at 0.2.2
2016-03-10 22:24:10 +00:00
./services/x11/colord.nix
* Simplified the X server directory structure: x11/xserver/* -> x11/. svn path=/nixos/trunk/; revision=17005
2009-09-10 12:50:58 +00:00
./services/x11/desktop-managers/default.nix
* Include the Bluetooth module in module-list.nix. svn path=/nixos/trunk/; revision=23486
2010-08-27 15:32:49 +00:00
./services/x11/display-managers/default.nix
gdm: Add very experimental display manager
2014-04-02 16:21:00 +00:00
./services/x11/display-managers/gdm.nix
lightdm: Initial expression for lightdm as the display-manager service (using default GTK greeter)
2013-03-25 18:26:07 +00:00
./services/x11/display-managers/lightdm.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/x11/display-managers/slim.nix
nixos/display-managers/startx: init (#47773) Dummy display manager that allows running X as a normal user. The X server is started manually from a vt using `startx`. Session startup commands must be provided by the user in ~/.xinitrc, which is NOT automatically generated.
2018-10-10 21:07:44 +00:00
./services/x11/display-managers/startx.nix
nixos/sx: init
2021-08-22 17:44:29 +00:00
./services/x11/display-managers/sx.nix
xpra module: add xpra, as xserver display-manager
2016-12-04 21:30:42 +00:00
./services/x11/display-managers/xpra.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/extra-layouts.nix
fractalart service: init, Generate wallpapers (#23231) * Add a service for generating wallpapers This service will generate a new wallpaper using the "FractalArt" haskell package.
2017-11-13 18:56:08 +00:00
./services/x11/fractalart.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/gdk-pixbuf.nix
./services/x11/hardware/cmt.nix
./services/x11/hardware/digimend.nix
nixos: Added libinput configuration like there was for synaptics
2015-09-18 15:29:10 +00:00
./services/x11/hardware/libinput.nix
* Added a module for oidentd. svn path=/nixos/trunk/; revision=30381
2011-11-10 23:06:24 +00:00
./services/x11/hardware/synaptics.nix
Add xf86-linux-wacom. Mostly reverts my previous commit. svn path=/nixos/trunk/; revision=21099
2010-04-15 15:46:38 +00:00
./services/x11/hardware/wacom.nix
services.xserver.imwheel: add module
2019-10-12 19:35:11 +00:00
./services/x11/imwheel.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/picom.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./services/x11/redshift.nix
nixos/touchegg: init
2021-08-07 04:04:39 +00:00
./services/x11/touchegg.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/unclutter-xfixes.nix
./services/x11/unclutter.nix
nixos/urserver: init
2020-08-09 09:42:55 +00:00
./services/x11/urserver.nix
urxvtd service: init adds pkgs.rxvt_unicode-with-plugins adds appropriate environment.variables no default target, must be enabled manually
2016-09-12 01:00:36 +00:00
./services/x11/urxvtd.nix
Adding the 'awesome' window manager to nixos. I made the system sw path include /etc/xdg - awesome looks for some file in the XDG_CONFIG_DIRS, which in bashrc is set to point to the profiles/etc/xdg svn path=/nixos/trunk/; revision=21675
2010-05-08 23:24:00 +00:00
./services/x11/window-managers/awesome.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/window-managers/bspwm.nix
nixos/clfswm: Restore working quicklisp package
2021-01-11 23:59:49 +00:00
./services/x11/window-managers/clfswm.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/window-managers/default.nix
Fluxbox: adding system support (as a module)
2014-08-19 13:40:17 +00:00
./services/x11/window-managers/fluxbox.nix
* Added an "auto" pseudo display manager that logs in a user automatically. This is mostly useful for testing. (KDM also has this feature, but it's nice not to depend on KDE for non-KDE tests.) svn path=/nixos/trunk/; revision=19239
2010-01-05 15:32:14 +00:00
./services/x11/window-managers/icewm.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./services/x11/window-managers/katriawm.nix
* Simplified the X server directory structure: x11/xserver/* -> x11/. svn path=/nixos/trunk/; revision=17005
2009-09-10 12:50:58 +00:00
./services/x11/window-managers/metacity.nix
nimdow: Add nixos windowmanager option
2023-03-12 12:49:52 +00:00
./services/x11/window-managers/nimdow.nix
Revert "nixos/none: remove"
2020-04-02 08:07:18 +00:00
./services/x11/window-managers/none.nix
* Simplified the X server directory structure: x11/xserver/* -> x11/. svn path=/nixos/trunk/; revision=17005
2009-09-10 12:50:58 +00:00
./services/x11/window-managers/twm.nix
WindowLab: initial pkg at 1.40 http://nickgravgaard.com/windowlab/
2015-12-29 10:13:12 +00:00
./services/x11/window-managers/windowlab.nix
* Simplified the X server directory structure: x11/xserver/* -> x11/. svn path=/nixos/trunk/; revision=17005
2009-09-10 12:50:58 +00:00
./services/x11/window-managers/wmii.nix
./services/x11/window-managers/xmonad.nix
services.xserver.xautolock: add module
2017-05-07 11:55:56 +00:00
./services/x11/xautolock.nix
xbanish service: init at 1.4
2016-04-20 06:24:53 +00:00
./services/x11/xbanish.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./services/x11/xfs.nix
nixos/xscreensaver: init module This adds a NixOS module for XScreenSaver (from @aidalgol in #130218, with a few updates). The module: * Installs XScreenSaver * Sets up a suid wrapper for xscreensaver-auth * Sets up a user service for xscreensaver The suid wrapper should function correctly when xscreensaver is installed via the derivation update in 40a00547b71. Co-authored-by: Aidan Gauland <aidalgol@fastmail.net> Co-authored-by: Anderson Torres <torres.anderson.85@protonmail.com>
2023-11-23 20:31:34 +00:00
./services/x11/xscreensaver.nix
* Simplified the X server directory structure: x11/xserver/* -> x11/. svn path=/nixos/trunk/; revision=17005
2009-09-10 12:50:58 +00:00
./services/x11/xserver.nix
nixos: Extract module for activation script inclusion into toplevel Allows omission of this functionality through disabledModules, e.g. for image building.
2023-06-10 13:08:38 +00:00
./system/activation/activatable-system.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./system/activation/activation-script.nix
nixos/specialisation.nix: Extract module
2022-11-04 22:45:27 +00:00
./system/activation/specialisation.nix
nixos: add system.switch.enable flag This flag allows the user to optionally exclude switch-to-confguration.pl from toplevel. This is interesting for appliance images where you don't want to re-build the system. This flag is called `rebuildable` because the standard interface to do this is `nixos-rebuild` which will not work anymore with this change.
2023-10-13 23:29:05 +00:00
./system/activation/switchable-system.nix
nixos/activation/bootspec: module-ify This does the following: * turns bootspec into a NixOS module * validates bootspecs with Cue * exposes internal knobs
2022-11-30 16:55:41 +00:00
./system/activation/bootspec.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./system/activation/top-level.nix
nixos/binfmt: Initial binfmt_msc support.
2018-02-18 17:42:17 +00:00
./system/boot/binfmt.nix
nixos/clevis: init Co-Authored-By: Julien Malka <julien@malka.sh>
2023-11-18 19:37:56 +00:00
./system/boot/clevis.nix
nixos: tmp on tmpfs option /tmp cleaning is done by systemd rather than stage-2-init enableEmergencyMode moved from systemd to seperate module new option to mount tmp on tmpfs new option to enable additional units shipped with systemd
2014-07-25 18:05:57 +00:00
./system/boot/emergency-mode.nix
nixos: introduce boot.growPartition (#33521) Move it from being a profile
2018-01-06 13:52:51 +00:00
./system/boot/grow-partition.nix
nixos/initrd-network: add new module
2015-10-16 17:35:18 +00:00
./system/boot/initrd-network.nix
nixos/system/boot/initrd-openvpn: Add openvpn options for initrd nixos/tests/initrd-openvpn: Add test for openvpn in the initramfs The module in this commit adds new options that allows the integration of an OpenVPN client into the initrd. This can be used e.g. to remotely unlock LUKS devices. This commit also adds two tests for `boot.initrd.network.openvpn`. The first one is a basic test to validate that a failing connection does not prevent the machine from booting. The second test validates that this module actually creates a valid openvpn connection. For this, it spawns three nodes: - The client that uses boot.initrd.network.openvpn - An OpenVPN server that acts as gateway and forwards a port to the client - A node that is external to the OpenVPN network The client connects to the OpenVPN server and spawns a netcat instance that echos a value to every client. Afterwards, the external node checks if it receives this value over the forwarded port on the OpenVPN gateway.
2020-06-30 22:02:56 +00:00
./system/boot/initrd-openvpn.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./system/boot/initrd-ssh.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./system/boot/kernel.nix
Add kexec support You can now do a fast reboot (bypassing the BIOS, which may take several minutes on servers) by running ‘systemctl kexec’. Unfortunately the QEMU test for this is unreliable due to a QEMU bug (it randomly crashes with a message like ‘Guest moved used index from 8 to 0’), so it's commented out.
2013-09-16 15:15:42 +00:00
./system/boot/kexec.nix
Add gummiboot module. We should probably eventually get rid of the old direct boot stub approach.
2013-02-02 05:03:45 +00:00
./system/boot/loader/efi.nix
Move boot loader modules to modules/system/boot/loader
2012-07-25 14:59:03 +00:00
./system/boot/loader/generations-dir/generations-dir.nix
generic-extlinux-compatible: Add new bootloader for ARM This module generates a /boot/extlinux/extlinux.conf bootloader configuration file that is supported by e.g. U-Boot: http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master With this, all ARM boards supported by U-Boot can be booted in a common way (a single boot file generator, all boards booting via initrd like x86) and with same boot menu functionality as GRUB has. -- sample extlinux.conf file -- # Generated file, all changes will be lost on nixos-rebuild! # Change this to e.g. nixos-42 to temporarily boot to an older configuration. DEFAULT nixos-default TIMEOUT 50 LABEL nixos-default MENU LABEL NixOS - Default LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf LABEL nixos-71 MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M) LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
2015-05-02 02:56:48 +00:00
./system/boot/loader/generic-extlinux-compatible
Move boot loader modules to modules/system/boot/loader
2012-07-25 14:59:03 +00:00
./system/boot/loader/grub/grub.nix
nixos: iPXE client for GRUB fix bug in grub/install-grub.pl that would replace @bootRoot@ with an invalid string
2014-12-02 16:46:45 +00:00
./system/boot/loader/grub/ipxe.nix
Move boot loader modules to modules/system/boot/loader
2012-07-25 14:59:03 +00:00
./system/boot/loader/grub/memtest.nix
nixos/boot/external: init This allows supporting external bootloader backends.
2021-08-05 19:33:13 +00:00
./system/boot/loader/external/external.nix
Treat init-script as a boot loader
2012-07-25 15:30:16 +00:00
./system/boot/loader/init-script/init-script.nix
Split the initrd sshd support into a separate module Also, drop boot.initrd.postEarlyDeviceCommands since preLVMCommands should work fine.
2016-02-02 16:25:18 +00:00
./system/boot/loader/loader.nix
Add support for lightweight NixOS containers You can now say: systemd.containers.foo.config = { services.openssh.enable = true; services.openssh.ports = [ 2022 ]; users.extraUsers.root.openssh.authorizedKeys.keys = [ "ssh-dss ..." ]; }; which defines a NixOS instance with the given configuration running inside a lightweight container. You can also manage the configuration of the container independently from the host: systemd.containers.foo.path = "/nix/var/nix/profiles/containers/foo"; where "path" is a NixOS system profile. It can be created/updated by doing: $ nix-env --set -p /nix/var/nix/profiles/containers/foo \ -f '<nixos>' -A system -I nixos-config=foo.nix The container configuration (foo.nix) should define boot.isContainer = true; to optimise away the building of a kernel and initrd. This is done automatically when using the "config" route. On the host, a lightweight container appears as the service "container-<name>.service". The container is like a regular NixOS (virtual) machine, except that it doesn't have its own kernel. It has its own root file system (by default /var/lib/containers/<name>), but shares the Nix store of the host (as a read-only bind mount). It also has access to the network devices of the host. Currently, if the configuration of the container changes, running "nixos-rebuild switch" on the host will cause the container to be rebooted. In the future we may want to send some message to the container so that it can activate the new container configuration without rebooting. Containers are not perfectly isolated yet. In particular, the host's /sys/fs/cgroup is mounted (writable!) in the guest.
2013-11-27 15:54:20 +00:00
./system/boot/loader/raspberrypi/raspberrypi.nix
Rename gummiboot module
2016-06-01 10:54:03 +00:00
./system/boot/loader/systemd-boot/systemd-boot.nix
* Fix evaluation of the luksroot module when luksRoot == null. The problem is that configuration values below a mkIf are evaluated strictly even if the condition is false. Thus "${luksRoot}" causes an evaluation error. As a workaround, use the empty string instead of `null' as the default value. However, we should really fix the laziness of mkIf. It's likely that NixOS evaluation would be much faster if it didn't have to evaluate disabled configuration values. svn path=/nixos/trunk/; revision=24477
2010-10-25 22:21:51 +00:00
./system/boot/luksroot.nix
address code review issues
2023-05-08 21:18:55 +00:00
./system/boot/stratisroot.nix
* Generate /etc/modprobe.conf to allow the setting of module options and the blacklisting of modules. svn path=/nixos/trunk/; revision=18284
2009-11-08 09:01:53 +00:00
./system/boot/modprobe.nix
Split the initrd sshd support into a separate module Also, drop boot.initrd.postEarlyDeviceCommands since preLVMCommands should work fine.
2016-02-02 16:25:18 +00:00
./system/boot/networkd.nix
nixos/uki: init
2023-12-30 02:36:36 +00:00
./system/boot/uki.nix
nixos/module: add boot.initrd.unl0kr
2023-02-26 13:30:19 +00:00
./system/boot/unl0kr.nix
plymouth service: init
2016-07-06 20:00:44 +00:00
./system/boot/plymouth.nix
Split the initrd sshd support into a separate module Also, drop boot.initrd.postEarlyDeviceCommands since preLVMCommands should work fine.
2016-02-02 16:25:18 +00:00
./system/boot/resolved.nix
Get rid of the Upstart shutdown job The only thing that Upstart's shutdown job did that systemd doesn't do natively is update the hardware clock. So added a service for that.
2012-06-18 22:15:34 +00:00
./system/boot/shutdown.nix
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
./system/boot/stage-1.nix
./system/boot/stage-2.nix
First attempt at using systemd Basic booting works. Systemd starts agetty instances on tty1 and tty2. Shutdown and journald also work.
2012-06-02 00:15:07 +00:00
./system/boot/systemd.nix
nixos: systemd: split off coredump into separate module
2022-03-13 14:57:35 +00:00
./system/boot/systemd/coredump.nix
nixos/systemd-stage-1: Add initrd secrets support
2022-04-24 14:45:02 +00:00
./system/boot/systemd/initrd-secrets.nix
./system/boot/systemd/initrd.nix
nixos: systemd: split off journald into separate module
2022-03-13 14:49:51 +00:00
./system/boot/systemd/journald.nix
nixos/journald-gateway: init move services.journald.enableHttpGateway -> services.journald.gateway.enable
2022-09-01 12:47:32 +00:00
./system/boot/systemd/journald-gateway.nix
nixos/journald-remote: init
2022-09-01 12:50:21 +00:00
./system/boot/systemd/journald-remote.nix
nixos/journald-upload: init
2022-09-01 12:50:48 +00:00
./system/boot/systemd/journald-upload.nix
nixos: systemd: split off logind into separate module
2022-03-13 14:32:15 +00:00
./system/boot/systemd/logind.nix
nixos: systemd: move systemd-nspawn to systemd/nspawn
2022-03-17 20:16:25 +00:00
./system/boot/systemd/nspawn.nix
nixos/systemd-oomd: Add a new module + test
2022-04-21 17:54:50 +00:00
./system/boot/systemd/oomd.nix
nixos/systemd-repart: init
2023-01-19 19:04:29 +00:00
./system/boot/systemd/repart.nix
nixos/systemd: Properly shut down the system
2022-04-15 10:23:02 +00:00
./system/boot/systemd/shutdown.nix
nixos/systemd-sysupdate: init
2023-07-17 15:20:20 +00:00
./system/boot/systemd/sysupdate.nix
nixos/systemd-sysusers: init
2023-11-19 22:16:14 +00:00
./system/boot/systemd/sysusers.nix
nixos: systemd: split off systemd-tmpfiles into separate module
2022-03-17 19:25:12 +00:00
./system/boot/systemd/tmpfiles.nix
nixos: systemd: split off systemd-user into separate module
2022-03-17 18:53:51 +00:00
./system/boot/systemd/user.nix
nixos/systemd/userdbd: add method to enable service This is recommended to enable in conjunction with systemd-homed.
2022-12-08 00:31:05 +00:00
./system/boot/systemd/userdbd.nix
nixos: add systemd-homed support As a start, it's not very configurable, but works pretty well.
2022-12-08 08:49:12 +00:00
./system/boot/systemd/homed.nix
systemd: Move networkd into separate modules The systemd module was getting rather bloated.
2015-04-19 19:05:12 +00:00
./system/boot/timesyncd.nix
nixos: tmp on tmpfs option /tmp cleaning is done by systemd rather than stage-2-init enableEmergencyMode moved from systemd to seperate module new option to mount tmp on tmpfs new option to enable additional units shipped with systemd
2014-07-25 18:05:57 +00:00
./system/boot/tmp.nix
nixos/uvesafb: init Signed-off-by: lucasew <lucas59356@gmail.com>
2022-10-22 14:03:31 +00:00
./system/boot/uvesafb.nix
nixos/etc.nix: Make independent (cherry picked from commit 56c283e5c8dfd4d8d5daa15dfa3896beef2ac012)
2021-12-03 12:21:16 +00:00
./system/etc/etc-activation.nix
nixos: move system.autoUpgrade This is not installer-specific
2017-12-17 20:32:56 +00:00
./tasks/auto-upgrade.nix
nixos: move bcache udev rule in a new bcache.nix module
2014-11-10 21:09:34 +00:00
./tasks/bcache.nix
Added cpuFreqGovernor option to configure a CPU frequency governor. svn path=/nixos/trunk/; revision=30949
2011-12-16 23:44:37 +00:00
./tasks/cpu-freq.nix
nixos/module-list.nix: keep it sorted
2014-07-16 20:16:34 +00:00
./tasks/encrypted-devices.nix
* Move various system initialisation tasks (e.g. mounting filesystems, initialising network interfaces, etc.) to modules/tasks. This follows the Upstart terminology: a service is a job that doesn't usually terminate (e.g. a daemon), while a task is a job that does some work and then exits. svn path=/nixos/branches/modular-nixos/; revision=15771
2009-05-28 15:03:05 +00:00
./tasks/filesystems.nix
nixos/apfs: init Add the final missing pieces for full APFS support.
2021-02-09 23:37:24 +00:00
./tasks/filesystems/apfs.nix
nixos/bcachefs: init module
2017-08-31 10:24:48 +00:00
./tasks/filesystems/bcachefs.nix
* Modularize filesystem support. Filesystems such as btrfs and reiserfs now have separate modules that are conditional on boot.supportedFilesystems and boot.initrd.supportedFilesystems. By default, these include the filesystems specified in the fsType attribute in fileSystems. Ext2/3/4 support is currently unconditional. Also unbreak the installer test (http://hydra.nixos.org/build/2272302). svn path=/nixos/trunk/; revision=32954
2012-03-09 14:37:58 +00:00
./tasks/filesystems/btrfs.nix
Move CIFS support into a separate module
2014-07-30 08:49:31 +00:00
./tasks/filesystems/cifs.nix
nixos/ecryptfs: init Currently, ecryptfs support is coupled to `security.pam.enableEcryptfs`, but one might want to use ecryptfs without enabling the PAM functionality. This commit splits it out into a `boot.supportedFilesystems` switch.
2017-10-07 15:27:46 +00:00
./tasks/filesystems/ecryptfs.nix
envfs: init at 1.0.0
2022-12-28 14:09:54 +00:00
./tasks/filesystems/envfs.nix
nixos/filesystems: init erofs Enable using an erofs filesystem as one of the filesystems needed to boot the system. This is useful for example in image based deployments where the Nix store is mounted read only. [erofs](https://docs.kernel.org/filesystems/erofs.html) offers multiple benefits over older filesystems like squashfs. Skip fsck.erofs because it is still experimental.
2023-05-11 12:35:00 +00:00
./tasks/filesystems/erofs.nix
nixos: add support for exfat filesystem
2015-05-27 15:58:13 +00:00
./tasks/filesystems/exfat.nix
* Modularize filesystem support. Filesystems such as btrfs and reiserfs now have separate modules that are conditional on boot.supportedFilesystems and boot.initrd.supportedFilesystems. By default, these include the filesystems specified in the fsType attribute in fileSystems. Ext2/3/4 support is currently unconditional. Also unbreak the installer test (http://hydra.nixos.org/build/2272302). svn path=/nixos/trunk/; revision=32954
2012-03-09 14:37:58 +00:00
./tasks/filesystems/ext.nix
nixos: f2fs filesystem module support (close #2085)
2014-03-25 20:39:10 +00:00
./tasks/filesystems/f2fs.nix
nixos: Add a filesystem module for JFS. I'm not using JFS, but this is to mainly make jfsutils available if you have defined a JFS filesystem in your configuration. Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2014-10-21 23:50:15 +00:00
./tasks/filesystems/jfs.nix
* Modularize filesystem support. Filesystems such as btrfs and reiserfs now have separate modules that are conditional on boot.supportedFilesystems and boot.initrd.supportedFilesystems. By default, these include the filesystems specified in the fsType attribute in fileSystems. Ext2/3/4 support is currently unconditional. Also unbreak the installer test (http://hydra.nixos.org/build/2272302). svn path=/nixos/trunk/; revision=32954
2012-03-09 14:37:58 +00:00
./tasks/filesystems/nfs.nix
Don't include ntfs-3g by default Issue #7117.
2015-04-19 19:27:52 +00:00
./tasks/filesystems/ntfs.nix
nixos/filesystems: init overlayfs
2024-02-03 21:40:40 +00:00
./tasks/filesystems/overlayfs.nix
* Modularize filesystem support. Filesystems such as btrfs and reiserfs now have separate modules that are conditional on boot.supportedFilesystems and boot.initrd.supportedFilesystems. By default, these include the filesystems specified in the fsType attribute in fileSystems. Ext2/3/4 support is currently unconditional. Also unbreak the installer test (http://hydra.nixos.org/build/2272302). svn path=/nixos/trunk/; revision=32954
2012-03-09 14:37:58 +00:00
./tasks/filesystems/reiserfs.nix
nixos/filesystems: init sshfs
2024-01-09 22:49:29 +00:00
./tasks/filesystems/sshfs.nix
nixos/filesystems: init squashfs
2023-07-04 15:06:49 +00:00
./tasks/filesystems/squashfs.nix
Refactor common unionfs-fuse initrd prep into a separate module
2012-12-16 17:33:36 +00:00
./tasks/filesystems/unionfs-fuse.nix
virtualbox service: add support for vboxsf guest filesystem Closes #9358 Signed-off-by: Jaka Hudoklin <jakahudoklin@gmail.com> Fix reference to bin/mount.vboxsf. Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2015-08-19 22:29:20 +00:00
./tasks/filesystems/vboxsf.nix
* Modularise vfat support. Also add fsck.vfat to the initrd. This prevents errors when booting from VFAT (e.g. an ISO image converted using unetbootin). svn path=/nixos/trunk/; revision=32956
2012-03-09 16:17:37 +00:00
./tasks/filesystems/vfat.nix
Adding xfs support at supportedFilesystems svn path=/nixos/trunk/; revision=33311
2012-03-20 22:00:32 +00:00
./tasks/filesystems/xfs.nix
Add zfs module.
2012-12-04 18:17:54 +00:00
./tasks/filesystems/zfs.nix
* Move various system initialisation tasks (e.g. mounting filesystems, initialising network interfaces, etc.) to modules/tasks. This follows the Upstart terminology: a service is a job that doesn't usually terminate (e.g. a daemon), while a task is a job that does some work and then exits. svn path=/nixos/branches/modular-nixos/; revision=15771
2009-05-28 15:03:05 +00:00
./tasks/lvm.nix
nixos/network-interfaces: Provide a networkd implementation
2014-11-20 10:37:48 +00:00
./tasks/network-interfaces-scripted.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./tasks/network-interfaces-systemd.nix
./tasks/network-interfaces.nix
./tasks/powertop.nix
powerManagement.enable sets link_power_management_policy to min_power svn path=/nixos/trunk/; revision=31490
2012-01-12 07:54:09 +00:00
./tasks/scsi-link-power-management.nix
nixos/stratis: init
2022-09-12 06:38:10 +00:00
./tasks/stratis.nix
* Move various system initialisation tasks (e.g. mounting filesystems, initialising network interfaces, etc.) to modules/tasks. This follows the Upstart terminology: a service is a job that doesn't usually terminate (e.g. a daemon), while a task is a job that does some work and then exits. svn path=/nixos/branches/modular-nixos/; revision=15771
2009-05-28 15:03:05 +00:00
./tasks/swraid.nix
Added an option to configure sensitivity and speed of trackpoints.
2014-05-23 08:18:03 +00:00
./tasks/trackpoint.nix
Allow running NixOS services outside of systemd The attribute ‘config.systemd.services.<service-name>.runner’ generates a script that runs the service outside of systemd. This is useful for testing, and also allows NixOS services to be used outside of NixOS. For instance, given a configuration file foo.nix: { config, pkgs, ... }: { services.postgresql.enable = true; services.postgresql.package = pkgs.postgresql92; services.postgresql.dataDir = "/tmp/postgres"; } you can build and run PostgreSQL as follows: $ nix-build -A config.systemd.services.postgresql.runner -I nixos-config=./foo.nix $ ./result This will run the service's ExecStartPre, ExecStart, ExecStartPost and ExecStopPost commands in an appropriate environment. It doesn't work well yet for "forking" services, since it can't track the main process. It also doesn't work for services that assume they're always executed by root.
2013-11-18 15:51:39 +00:00
./testing/service-runner.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/amazon-options.nix
nixos/anbox: init module Co-authored-by: Luke Adams <luke.adams@belljar.io> Co-authored-by: Volth <volth@webmaster.ms> Co-authored-by: Jörg Thalheim <Mic92@users.noreply.github.com> Co-authored-by: Edward Tjörnhammar <ed@cflags.cc> Co-authored-by: Gabriel Ebner <gebner@gebner.org>
2018-11-03 18:33:58 +00:00
./virtualisation/anbox.nix
nixos/appvm: init at unstable-2021-12-20 Co-authored-by: Mikhail Klementev <blame@dumpstack.io> Co-authored-by: Cabia Rangris <me@cab404.ru>
2022-05-20 12:21:27 +00:00
./virtualisation/appvm.nix
nixos: Move build-vm into virtualisation.vmVariant ... which is like a specialisation, but for nixos-rebuild build-vm
2021-12-17 12:15:55 +00:00
./virtualisation/build-vm.nix
container-login.nix -> container-config.nix
2014-04-01 13:43:27 +00:00
./virtualisation/container-config.nix
nixos/kubernetes: docker -> containerd also, nixos/containerd: module init
2021-02-25 15:00:59 +00:00
./virtualisation/containerd.nix
nixos.virtualisation.containers: Init common /etc/containers configuration module What's happening now is that both cri-o and podman are creating /etc/containers/policy.json. By splitting out the creation of configuration files we can make the podman module leaner & compose better with other container software.
2020-04-21 09:22:20 +00:00
./virtualisation/containers.nix
Add cri-o service to modules (#68153) Signed-off-by: Sascha Grunert <sgrunert@suse.com>
2019-09-21 14:18:42 +00:00
./virtualisation/cri-o.nix
docker-rootless service: init
2021-12-14 22:07:58 +00:00
./virtualisation/docker-rootless.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/docker.nix
ecs-agent NixOS module: init A very simple skeleton for now that doesn't attempt to model any of the agent configuration, but we can grow it later. Tested and works on an EC2 instance with ECS.
2017-02-10 05:37:36 +00:00
./virtualisation/ecs-agent.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/hyperv-guest.nix
nixos/incus: init module and tests
2023-10-20 04:10:59 +00:00
./virtualisation/incus.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/kvmgt.nix
* Add an Upstart job for libvirtd. svn path=/nixos/trunk/; revision=26114
2011-02-25 15:07:52 +00:00
./virtualisation/libvirtd.nix
Add support for global LXC config files
2014-09-21 19:29:15 +00:00
./virtualisation/lxc.nix
lxcfs: add module
2016-12-02 12:39:04 +00:00
./virtualisation/lxcfs.nix
nixos/lxd: Add service
2015-09-14 06:27:31 +00:00
./virtualisation/lxd.nix
nixos/lxd-agent: init module from distrobuilder generator
2023-08-10 17:58:09 +00:00
./virtualisation/lxd-agent.nix
nixos/multipass: init
2023-02-03 09:27:35 +00:00
./virtualisation/multipass.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/nixos-containers.nix
./virtualisation/oci-containers.nix
openstack-options: init
2022-02-03 16:03:38 +00:00
./virtualisation/openstack-options.nix
nixos: Add OCI image options Follows what amazon images does.
2021-05-29 01:57:58 +00:00
./virtualisation/oci-options.nix
add openvswitch package + basic nixos module to enable it
2014-06-12 13:16:38 +00:00
./virtualisation/openvswitch.nix
nixos/parallels-guest: add options
2014-11-10 23:32:05 +00:00
./virtualisation/parallels-guest.nix
nixos/podman: sort files into directories Makes codeowners, git history, etc. a bit simpler now that podman has expanded beyond the original single file module and test.
2021-12-09 02:10:44 +00:00
./virtualisation/podman/default.nix
qemu-guest-agent: init module Allow out of band communication between qemu VMs and the host. Useful to retrieve IPs of VMs from the host (for instance when libvirt can't analyze DHCP requests because VMs are configured with static addresses or when there is connectivity default).
2018-04-18 02:29:54 +00:00
./virtualisation/qemu-guest-agent.nix
nixos/rosetta: init module Run x86_64 binaries through Rosetta inside NixOS guests running on Apple silicon.
2022-11-24 11:08:48 +00:00
./virtualisation/rosetta.nix
nixos/spice-usb-redirection: init Fixes #39618
2020-09-12 07:10:06 +00:00
./virtualisation/spice-usb-redirection.nix
* Forgot this. svn path=/nixos/trunk/; revision=32566
2012-02-25 20:11:04 +00:00
./virtualisation/virtualbox-guest.nix
nixos: Give virtualbox-host.nix a better location. In 14f09e0, I've introduced the module under modules/programs, because the legacy virtualbox.nix was also under that path. But because we already have modules/virtualisation/virtualbox-guest.nix, it really makes sense to put this module alongside of it as well. This module thus has no change in functionality and I've tested evaluation against nixos/tests/virtualbox.nix and the manual. Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2015-08-04 01:46:44 +00:00
./virtualisation/virtualbox-host.nix
VMWare guest support and open-vm-tools package
2015-05-13 08:31:32 +00:00
./virtualisation/vmware-guest.nix
nixos/vmware-host: init at 16.2.3
2022-04-23 15:33:34 +00:00
./virtualisation/vmware-host.nix
nixos/waydroid: init
2021-10-09 07:07:54 +00:00
./virtualisation/waydroid.nix
xe-guest-utilities: init at 6.2.0 use mkEnableOption use sha256 add xe-guest-utilities to module-list.nix
2016-03-29 17:40:49 +00:00
./virtualisation/xe-guest-utilities.nix
module-list: put in ascii-betical ordering
2022-12-16 21:09:28 +00:00
./virtualisation/xen-dom0.nix
nixos/athens: init at 0.12.1 Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
2023-11-04 01:46:35 +00:00
{
documentation.nixos.extraModules = [
./virtualisation/qemu-vm.nix
./image/repart.nix
nixos/image: include module options in manual
2023-10-31 10:25:04 +00:00
];
}
* Move the list of modules into a separate file. This file could be generated by some find/grep hackery as Nicolas suggested. svn path=/nixos/branches/modular-nixos/; revision=15743
2009-05-27 09:09:17 +00:00
]
Reference in New Issue Copy Permalink