nixpkgs/pkgs/stdenv/generic/setup.sh

672 lines
14 KiB
Bash
Raw Normal View History

set -e
test -z $NIX_GCC && NIX_GCC=@gcc@
# Set up the initial path.
PATH=
for i in $NIX_GCC @initialPath@; do
PATH=$PATH${PATH:+:}$i/bin
done
if test "$NIX_DEBUG" = "1"; then
echo "Initial path: $PATH"
fi
# Execute the pre-hook.
export SHELL=@shell@
param1=@param1@
param2=@param2@
param3=@param3@
param4=@param4@
param5=@param5@
if test -n "@preHook@"; then
source @preHook@
fi
# Check that the pre-hook initialised SHELL.
if test -z "$SHELL"; then echo "SHELL not set"; exit 1; fi
# Hack: run gcc's setup hook.
envHooks=()
if test -f $NIX_GCC/nix-support/setup-hook; then
source $NIX_GCC/nix-support/setup-hook
fi
# Ensure that the given directory exists.
ensureDir() {
local dir=$1
if ! test -x "$dir"; then mkdir -p "$dir"; fi
}
# Called when some build action fails. If $succeedOnFailure is set,
# create the file `$out/nix-support/failed' to signal failure, and
# exit normally. Otherwise, exit with failure.
fail() {
exitCode=$?
if test "$succeedOnFailure" = 1; then
ensureDir "$out/nix-support"
touch "$out/nix-support/failed"
exit 0
else
exit $?
fi
}
# Allow the caller to augment buildInputs (it's not always possible to
# do this before the call to setup.sh, since the PATH is empty at that
# point; here we have a basic Unix environment).
if test -n "$addInputsHook"; then
$addInputsHook
fi
# Recursively find all build inputs.
findInputs()
{
local pkg=$1
case $pkgs in
*\ $pkg\ *)
return 0
;;
esac
pkgs="$pkgs $pkg "
if test -f $pkg/nix-support/setup-hook; then
source $pkg/nix-support/setup-hook
fi
if test -f $pkg/nix-support/propagated-build-inputs; then
for i in $(cat $pkg/nix-support/propagated-build-inputs); do
findInputs $i
done
fi
}
pkgs=""
if test -n "$buildinputs"; then
buildInputs="$buildinputs" # compatibility
fi
for i in $buildInputs $propagatedBuildInputs; do
findInputs $i
done
# Set the relevant environment variables to point to the build inputs
# found above.
addToEnv()
{
local pkg=$1
if test "$ignoreFailedInputs" != "1" -a -e $1/nix-support/failed; then
echo "failed input $1" >&2
fail
fi
if test -d $1/bin; then
export _PATH=$_PATH${_PATH:+:}$1/bin
fi
for i in "${envHooks[@]}"; do
$i $pkg
done
}
for i in $pkgs; do
addToEnv $i
done
# Add the output as an rpath.
if test "$NIX_NO_SELF_RPATH" != "1"; then
export NIX_LDFLAGS="-rpath $out/lib $NIX_LDFLAGS"
fi
# Strip debug information by default.
if test -z "$NIX_STRIP_DEBUG"; then
export NIX_STRIP_DEBUG=1
export NIX_CFLAGS_STRIP="-g0 -Wl,--strip-debug"
fi
# Do we know where the store is? This is required for purity checking.
if test -z "$NIX_STORE"; then
echo "Error: you have an old version of Nix that does not set the" \
"NIX_STORE variable. Please upgrade." >&2
exit 1
fi
# We also need to know the root of the build directory for purity checking.
if test -z "$NIX_BUILD_TOP"; then
echo "Error: you have an old version of Nix that does not set the" \
"NIX_BUILD_TOP variable. Please upgrade." >&2
exit 1
fi
# Set the TZ (timezone) environment variable, otherwise commands like
# `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must
# be set--see zic manual page 2004').
export TZ=UTC
# Execute the post-hook.
if test -n "@postHook@"; then
source @postHook@
fi
PATH=$_PATH${_PATH:+:}$PATH
if test "$NIX_DEBUG" = "1"; then
echo "Final path: $PATH"
fi
######################################################################
# What follows is the generic builder.
nestingLevel=0
startNest() {
nestingLevel=$(($nestingLevel + 1))
echo -en "\e[$1p"
}
stopNest() {
nestingLevel=$(($nestingLevel - 1))
echo -en "\e[q"
}
header() {
startNest "$2"
echo "$1"
}
# Make sure that even when we exit abnormally, the original nesting
# level is properly restored.
closeNest() {
while test $nestingLevel -gt 0; do
stopNest
done
}
trap "closeNest" EXIT
# This function is useful for debugging broken Nix builds. It dumps
# all environment variables to a file `env-vars' in the build
# directory. If the build fails and the `-K' option is used, you can
# then go to the build directory and source in `env-vars' to reproduce
# the environment used for building.
dumpVars() {
if test "$noDumpEnvVars" != "1"; then
export > $NIX_BUILD_TOP/env-vars
fi
}
# Redirect stdout/stderr to a named pipe connected to a `tee' process
# that writes the specified file (and also to our original stdout).
# The original stdout is saved in descriptor 3.
startLog() {
local logFile=${logNr}_$1
logNr=$((logNr + 1))
if test "$logPhases" = 1; then
ensureDir $logDir
exec 3>&1
if test "$dontLogThroughTee" != 1; then
# This required named pipes (fifos).
logFifo=$NIX_BUILD_TOP/log_fifo
test -p $logFifo || mkfifo $logFifo
startLogWrite "$logDir/$logFile" "$logFifo"
exec > $logFifo 2>&1
else
exec > $logDir/$logFile 2>&1
fi
fi
}
# Factored into a separate function so that it can be overriden.
startLogWrite() {
tee "$1" < "$2" &
logWriterPid=$!
}
if test -z "$logDir"; then
logDir=$out/log
fi
logNr=0
# Restore the original stdout/stderr.
stopLog() {
if test "$logPhases" = 1; then
exec >&3 2>&1
# Wait until the tee process has died. Otherwise output from
# different phases may be mixed up.
if test -n "$logWriterPid"; then
wait $logWriterPid
logWriterPid=
rm $logFifo
fi
fi
}
# Utility function: return the base name of the given path, with the
# prefix `HASH-' removed, if present.
stripHash() {
strippedName=$(basename $1);
if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
strippedName=$(echo "$strippedName" | cut -c34-)
fi
}
unpackFile() {
local file=$1
local cmd
header "unpacking source archive $file" 3
case $file in
*.tar)
tar xvf $file || fail
;;
*.tar.gz | *.tgz | *.tar.Z)
gunzip < $file | tar xvf - || fail
;;
*.tar.bz2 | *.tbz2)
bunzip2 < $file | tar xvf - || fail
;;
*.zip)
unzip $file || fail
;;
*)
if test -d "$file"; then
stripHash $file
cp -prvd $file $strippedName || fail
else
if test -n "$findUnpacker"; then
$findUnpacker $1;
fi
if test -z "$unpackCmd"; then
echo "source archive $file has unknown type"
exit 1
fi
$unpackCmd || fail
fi
;;
esac
stopNest
}
unpackW() {
if test -n "$unpackPhase"; then
$unpackPhase
return
fi
if test -z "$srcs"; then
if test -z "$src"; then
echo 'variable $src or $srcs should point to the source'
exit 1
fi
srcs="$src"
fi
# To determine the source directory created by unpacking the
# source archives, we record the contents of the current
# directory, then look below which directory got added. Yeah,
# it's rather hacky.
local dirsBefore=""
for i in *; do
if test -d "$i"; then
dirsBefore="$dirsBefore $i "
fi
done
# Unpack all source archives.
for i in $srcs; do
unpackFile $i
done
# Find the source directory.
if test -n "$setSourceRoot"; then
$setSourceRoot
else
sourceRoot=
for i in *; do
if test -d "$i"; then
case $dirsBefore in
*\ $i\ *)
;;
*)
if test -n "$sourceRoot"; then
echo "unpacker produced multiple directories"
exit 1
fi
sourceRoot=$i
;;
esac
fi
done
fi
if test -z "$sourceRoot"; then
echo "unpacker appears to have produced no directories"
exit 1
fi
echo "source root is $sourceRoot"
# By default, add write permission to the sources. This is often
# necessary when sources have been copied from other store
# locations.
if test "dontMakeSourcesWritable" != 1; then
chmod -R +w $sourceRoot
fi
if test -n "$postUnpack"; then
$postUnpack
fi
}
unpackPhase() {
header "unpacking sources"
startLog "unpack"
unpackW
stopLog
stopNest
}
patchW() {
if test -n "$patchPhase"; then
$patchPhase
return
fi
for i in $patches; do
header "applying patch $i" 3
patch -p1 < $i || fail
stopNest
done
}
patchPhase() {
if test -z "$patchPhase" -a -z "$patches"; then return; fi
header "patching sources"
startLog "patch"
patchW
stopLog
stopNest
}
fixLibtool() {
sed 's^eval sys_lib_.*search_path=.*^^' < $1 > $1.tmp
mv $1.tmp $1
}
configureW() {
if test -n "$configurePhase"; then
$configurePhase
return
fi
if test -n "$preConfigure"; then
$preConfigure
fi
if test -z "$prefix"; then
prefix="$out";
fi
if test "$useTempPrefix" = "1"; then
prefix="$NIX_BUILD_TOP/tmp_prefix";
fi
if test -z "$configureScript"; then
configureScript=./configure
if ! test -x $configureScript; then
echo "no configure script, doing nothing"
return
fi
fi
if test -z "$dontFixLibtool"; then
for i in $(find . -name "ltmain.sh"); do
echo "fixing libtool script $i"
fixLibtool $i
done
fi
if test -z "$dontAddPrefix"; then
configureFlags="--prefix=$prefix $configureFlags"
fi
echo "configure flags: $configureFlags"
$configureScript $configureFlags || fail
if test -n "$postConfigure"; then
$postConfigure
fi
}
configurePhase() {
header "configuring"
startLog "configure"
configureW
stopLog
stopNest
}
buildW() {
if test -n "$buildPhase"; then
$buildPhase
return
fi
if test -n "$preBuild"; then
$preBuild
fi
echo "make flags: $makeFlags"
make $makeFlags || fail
if test -n "$postBuild"; then
$postBuild
fi
}
buildPhase() {
if test "$dontBuild" = 1; then
return
fi
header "building"
startLog "build"
buildW
stopLog
stopNest
}
checkW() {
if test -n "$checkPhase"; then
$checkPhase
return
fi
if test -z "$checkTarget"; then
checkTarget="check"
fi
echo "check flags: $checkFlags"
make $checkFlags $checkTarget || fail
}
checkPhase() {
if test "$doCheck" != 1; then
return
fi
header "checking"
startLog "check"
checkW
stopLog
stopNest
}
patchELF() {
# Patch all ELF executables and shared libraries.
header "patching ELF executables and libraries"
find "$prefix" \( \
\( -type f -a -name "*.so*" \) -o \
\( -type f -a -perm +0100 \) \
\) -print -exec patchelf --shrink-rpath {} \;
stopNest
}
installW() {
if test -n "$installPhase"; then
$installPhase
return
fi
if test -n "$preInstall"; then
$preInstall
fi
ensureDir "$prefix"
if test -z "$dontMakeInstall"; then
echo "install flags: $installFlags"
make install $installFlags || fail
fi
if test -z "$dontStrip" -a "$NIX_STRIP_DEBUG" = 1; then
find "$prefix" -name "*.a" -exec echo stripping {} \; \
-exec strip -S {} \; || fail
fi
if test "$havePatchELF" = 1 -a -z "$dontPatchELF"; then
patchELF "$prefix"
fi
if test -n "$propagatedBuildInputs"; then
ensureDir "$out/nix-support"
echo "$propagatedBuildInputs" > "$out/nix-support/propagated-build-inputs"
fi
if test -n "$postInstall"; then
$postInstall
fi
}
installPhase() {
if test "$dontInstall" = 1; then
return
fi
header "installing"
startLog "install"
installW
stopLog
stopNest
}
distW() {
if test -n "$distPhase"; then
$distPhase
return
fi
if test -n "$preDist"; then
$preDist
fi
if test -z "$distTarget"; then
distTarget="dist"
fi
echo "dist flags: $distFlags"
make $distFlags $distTarget || fail
if test "$dontCopyDist" != 1; then
ensureDir "$out/tarballs"
if test -z "$tarballs"; then
tarballs="*.tar.gz"
fi
# Note: don't quote $tarballs, since we explicitly permit
# wildcards in there.
cp -pvd $tarballs $out/tarballs
fi
if test -n "$postDist"; then
$postDist
fi
}
distPhase() {
if test "$doDist" != 1; then
return
fi
header "creating distribution"
startLog "dist"
distW
stopLog
stopNest
}
genericBuild() {
header "building $out"
unpackPhase
cd $sourceRoot
if test -z "$phases"; then
phases="patchPhase configurePhase buildPhase checkPhase \
installPhase distPhase";
fi
for i in $phases; do
dumpVars
$i
done
stopNest
}
dumpVars