nixpkgs/nixos/modules/virtualisation/qemu-vm.nix

707 lines
23 KiB
Nix
Raw Normal View History

# This module creates a virtual machine from the NixOS configuration.
# Building the `config.system.build.vm' attribute gives you a command
# that starts a KVM/QEMU VM running the NixOS configuration defined in
# `config'. The Nix store is shared read-only with the host, which
# makes (re)building VMs very efficient. However, it also means you
# can't reconfigure the guest inside the guest - you need to rebuild
# the VM in the host. On the other hand, the root filesystem is a
# read/writable disk image persistent across VM reboots.
{ config, lib, pkgs, ... }:
with lib;
with import ../../lib/qemu-flags.nix { inherit pkgs; };
let
qemu = config.system.build.qemu or pkgs.qemu_test;
vmName =
if config.networking.hostName == ""
then "noname"
else config.networking.hostName;
cfg = config.virtualisation;
consoles = lib.concatMapStringsSep " " (c: "console=${c}") cfg.qemu.consoles;
driveOpts = { ... }: {
options = {
file = mkOption {
type = types.str;
description = "The file image used for this drive.";
};
driveExtraOpts = mkOption {
type = types.attrsOf types.str;
default = {};
description = "Extra options passed to drive flag.";
};
deviceExtraOpts = mkOption {
type = types.attrsOf types.str;
default = {};
description = "Extra options passed to device flag.";
};
name = mkOption {
type = types.nullOr types.str;
default = null;
description =
"A name for the drive. Must be unique in the drives list. Not passed to qemu.";
};
};
};
driveCmdline = idx: { file, driveExtraOpts, deviceExtraOpts, ... }:
let
drvId = "drive${toString idx}";
mkKeyValue = generators.mkKeyValueDefault {} "=";
mkOpts = opts: concatStringsSep "," (mapAttrsToList mkKeyValue opts);
driveOpts = mkOpts (driveExtraOpts // {
index = idx;
id = drvId;
"if" = "none";
inherit file;
});
deviceOpts = mkOpts (deviceExtraOpts // {
drive = drvId;
});
device =
if cfg.qemu.diskInterface == "scsi" then
"-device lsi53c895a -device scsi-hd,${deviceOpts}"
else
"-device virtio-blk-pci,${deviceOpts}";
in
"-drive ${driveOpts} ${device}";
drivesCmdLine = drives: concatStringsSep " " (imap1 driveCmdline drives);
nixos/tests: Fix QEMU flags for SCSI disks The ability to specify "-drive if=scsi" has been removed in QEMU version 2.12 (introduced in 3e3b39f173f9abc99da84084a1f4657c9de885bd). Quote from https://wiki.qemu.org/ChangeLog/2.12#Incompatible_changes: > The deprecated way of configuring SCSI devices with "-drive if=scsi" > on x86 has been removed. Use an appropriate SCSI controller together > "-device scsi-hd" or "-device scsi-cd" and a corresponding "-blockdev" > parameter instead. So whenever the diskInterface is "scsi" we use the new way to specify the drive and fall back to the deprecated way for the time being. The reason why I'm not using the new way for "virtio" and "ide" as well is because there is no simple generic way anymore to specify these. This also turns the type of the virtualisation.qemu.diskInterface option to be an enum, so the user knows which values are allowed but we can also make sure the right value is provided to prevent typos. I've tested this against a few non-disk-related NixOS VM tests but also the installer.grub1 test (because it uses "ide" as its drive interface), the installer.simple test (just to be sure it still works with "virtio") and all the tests in nixos/tests/boot.nix. In order to be able to run the grub1 test I had to go back to 8b1cf100cd8badad6e1b6d4650b904b88aa870db (which is a known commit where that test still works) and apply the QEMU update and this very commit, because right now the test is broken. Apart from the tests here in nixpkgs, I also ran another[1] test in another repository which uses the "scsi" disk interface as well (in comparison to most of the installer tests, this one actually failed prior to this commit). All of them now succeed. [1]: https://github.com/openlab-aux/vuizvui/blob/9b5a119972e9c2d327500638d89063f4fce243ec/tests/system/kernel/bfq.nix Signed-off-by: aszlig <aszlig@nix.build> Cc: @edostra, @grahamc, @dezgeg, @abbradar, @ts468
2018-04-29 23:43:17 +00:00
2020-06-14 03:54:20 +00:00
2020-01-28 22:30:41 +00:00
# Creates a device name from a 1-based a numerical index, e.g.
# * `driveDeviceName 1` -> `/dev/vda`
# * `driveDeviceName 2` -> `/dev/vdb`
driveDeviceName = idx:
let letter = elemAt lowerChars (idx - 1);
in if cfg.qemu.diskInterface == "scsi" then
"/dev/sd${letter}"
else
"/dev/vd${letter}";
lookupDriveDeviceName = driveName: driveList:
(findSingle (drive: drive.name == driveName)
(throw "Drive ${driveName} not found")
(throw "Multiple drives named ${driveName}") driveList).device;
addDeviceNames =
imap1 (idx: drive: drive // { device = driveDeviceName idx; });
2020-06-14 03:54:20 +00:00
efiPrefix =
if (pkgs.stdenv.isi686 || pkgs.stdenv.isx86_64) then "${pkgs.OVMF.fd}/FV/OVMF"
else if pkgs.stdenv.isAarch64 then "${pkgs.OVMF.fd}/FV/AAVMF"
else throw "No EFI firmware available for platform";
efiFirmware = "${efiPrefix}_CODE.fd";
efiVars = "${efiPrefix}_VARS.fd";
# Shell script to start the VM.
startVM =
''
#! ${pkgs.runtimeShell}
NIX_DISK_IMAGE=$(readlink -f ''${NIX_DISK_IMAGE:-${config.virtualisation.diskImage}})
if ! test -e "$NIX_DISK_IMAGE"; then
${qemu}/bin/qemu-img create -f qcow2 "$NIX_DISK_IMAGE" \
${toString config.virtualisation.diskSize}M || exit 1
fi
# Create a directory for storing temporary data of the running VM.
if [ -z "$TMPDIR" -o -z "$USE_TMPDIR" ]; then
TMPDIR=$(mktemp -d nix-vm.XXXXXXXXXX --tmpdir)
fi
2015-12-29 15:39:26 +00:00
# Create a directory for exchanging data with the VM.
mkdir -p $TMPDIR/xchg
${if cfg.useBootLoader then ''
2015-12-29 15:39:26 +00:00
# Create a writable copy/snapshot of the boot disk.
# A writable boot disk can be booted from automatically.
${qemu}/bin/qemu-img create -f qcow2 -b ${bootDisk}/disk.img $TMPDIR/disk.img || exit 1
${if cfg.useEFIBoot then ''
# VM needs writable EFI vars
cp ${bootDisk}/EFI_VARS.fd $TMPDIR || exit 1
chmod 0644 $TMPDIR/EFI_VARS.fd || exit 1
'' else ''
''}
'' else ''
''}
cd $TMPDIR
idx=0
${flip concatMapStrings cfg.emptyDiskImages (size: ''
2015-03-05 14:21:57 +00:00
if ! test -e "empty$idx.qcow2"; then
${qemu}/bin/qemu-img create -f qcow2 "empty$idx.qcow2" "${toString size}M"
2015-03-05 14:21:57 +00:00
fi
idx=$((idx + 1))
'')}
# Start QEMU.
exec ${qemuBinary qemu} \
-name ${vmName} \
-m ${toString config.virtualisation.memorySize} \
-smp ${toString config.virtualisation.cores} \
-device virtio-rng-pci \
${concatStringsSep " " config.virtualisation.qemu.networkingOptions} \
-virtfs local,path=/nix/store,security_model=none,mount_tag=store \
-virtfs local,path=$TMPDIR/xchg,security_model=none,mount_tag=xchg \
-virtfs local,path=''${SHARED_DIR:-$TMPDIR/xchg},security_model=none,mount_tag=shared \
${drivesCmdLine config.virtualisation.qemu.drives} \
${toString config.virtualisation.qemu.options} \
$QEMU_OPTS \
"$@"
'';
regInfo = pkgs.closureInfo { rootPaths = config.virtualisation.pathsInNixDB; };
# Generate a hard disk image containing a /boot partition and GRUB
# in the MBR. Used when the `useBootLoader' option is set.
2016-02-09 15:15:57 +00:00
# FIXME: use nixos/lib/make-disk-image.nix.
bootDisk =
pkgs.vmTools.runInLinuxVM (
pkgs.runCommand "nixos-boot-disk"
{ preVM =
''
mkdir $out
diskImage=$out/disk.img
2020-06-14 03:54:20 +00:00
${qemu}/bin/qemu-img create -f qcow2 $diskImage "60M"
${if cfg.useEFIBoot then ''
efiVars=$out/EFI_VARS.fd
cp ${efiVars} $efiVars
chmod 0644 $efiVars
'' else ''
''}
'';
buildInputs = [ pkgs.utillinux ];
QEMU_OPTS = "-nographic -serial stdio -monitor none"
+ lib.optionalString cfg.useEFIBoot (
" -drive if=pflash,format=raw,unit=0,readonly=on,file=${efiFirmware}"
+ " -drive if=pflash,format=raw,unit=1,file=$efiVars");
}
''
2020-06-14 03:54:20 +00:00
# Create a /boot EFI partition with 60M and arbitrary but fixed GUIDs for reproducibility
${pkgs.gptfdisk}/bin/sgdisk \
--set-alignment=1 --new=1:34:2047 --change-name=1:BIOSBootPartition --typecode=1:ef02 \
--set-alignment=512 --largest-new=2 --change-name=2:EFISystem --typecode=2:ef00 \
--attributes=1:set:1 \
--attributes=2:set:2 \
--disk-guid=97FD5997-D90B-4AA3-8D16-C1723AEA73C1 \
--partition-guid=1:1C06F03B-704E-4657-B9CD-681A087A2FDC \
--partition-guid=2:970C694F-AFD0-4B99-B750-CDB7A329AB6F \
--hybrid 2 \
--recompute-chs /dev/vda
${pkgs.dosfstools}/bin/mkfs.fat -F16 /dev/vda2
export MTOOLS_SKIP_CHECK=1
${pkgs.mtools}/bin/mlabel -i /dev/vda2 ::boot
# Mount /boot; load necessary modules first.
${pkgs.kmod}/bin/insmod ${pkgs.linux}/lib/modules/*/kernel/fs/nls/nls_cp437.ko.xz || true
${pkgs.kmod}/bin/insmod ${pkgs.linux}/lib/modules/*/kernel/fs/nls/nls_iso8859-1.ko.xz || true
${pkgs.kmod}/bin/insmod ${pkgs.linux}/lib/modules/*/kernel/fs/fat/fat.ko.xz || true
${pkgs.kmod}/bin/insmod ${pkgs.linux}/lib/modules/*/kernel/fs/fat/vfat.ko.xz || true
${pkgs.kmod}/bin/insmod ${pkgs.linux}/lib/modules/*/kernel/fs/efivarfs/efivarfs.ko.xz || true
mkdir /boot
mount /dev/vda2 /boot
${optionalString config.boot.loader.efi.canTouchEfiVariables ''
mount -t efivarfs efivarfs /sys/firmware/efi/efivars
''}
# This is needed for GRUB 0.97, which doesn't know about virtio devices.
mkdir /boot/grub
echo '(hd0) /dev/vda' > /boot/grub/device.map
2020-04-11 20:38:55 +00:00
# This is needed for systemd-boot to find ESP, and udev is not available here to create this
mkdir -p /dev/block
ln -s /dev/vda2 /dev/block/254:2
# Set up system profile (normally done by nixos-rebuild / nix-env --set)
mkdir -p /nix/var/nix/profiles
2020-04-11 20:38:55 +00:00
ln -s ${config.system.build.toplevel} /nix/var/nix/profiles/system-1-link
ln -s /nix/var/nix/profiles/system-1-link /nix/var/nix/profiles/system
# Install bootloader
touch /etc/NIXOS
export NIXOS_INSTALL_BOOTLOADER=1
${config.system.build.toplevel}/bin/switch-to-configuration boot
umount /boot
'' # */
);
in
{
imports = [
../profiles/qemu-guest.nix
./docker-preloader.nix
];
options = {
virtualisation.memorySize =
mkOption {
default = 384;
description =
''
Memory size (M) of virtual machine.
'';
};
virtualisation.diskSize =
mkOption {
default = 512;
description =
''
Disk size (M) of virtual machine.
'';
};
virtualisation.diskImage =
mkOption {
default = "./${vmName}.qcow2";
description =
''
Path to the disk image containing the root filesystem.
The image will be created on startup if it does not
exist.
'';
};
virtualisation.bootDevice =
mkOption {
type = types.str;
example = "/dev/vda";
description =
''
The disk to be used for the root filesystem.
'';
};
virtualisation.emptyDiskImages =
mkOption {
default = [];
2013-09-04 13:12:07 +00:00
type = types.listOf types.int;
description =
''
Additional disk images to provide to the VM. The value is
a list of size in megabytes of each disk. These disks are
writeable by the VM.
'';
};
virtualisation.graphics =
mkOption {
default = true;
description =
''
Whether to run QEMU with a graphics window, or in nographic mode.
Serial console will be enabled on both settings, but this will
change the preferred console.
'';
};
virtualisation.cores =
mkOption {
default = 1;
type = types.int;
description =
''
Specify the number of cores the guest is permitted to use.
The number can be higher than the available cores on the
host system.
'';
};
virtualisation.pathsInNixDB =
mkOption {
default = [];
description =
''
The list of paths whose closure is registered in the Nix
database in the VM. All other paths in the host Nix store
appear in the guest Nix store as well, but are considered
garbage (because they are not registered in the Nix
database in the guest).
'';
};
virtualisation.vlans =
mkOption {
default = [ 1 ];
example = [ 1 2 ];
description =
''
Virtual networks to which the VM is connected. Each
number <replaceable>N</replaceable> in this list causes
the VM to have a virtual Ethernet interface attached to a
separate virtual network on which it will be assigned IP
address
<literal>192.168.<replaceable>N</replaceable>.<replaceable>M</replaceable></literal>,
where <replaceable>M</replaceable> is the index of this VM
in the list of VMs.
'';
};
virtualisation.writableStore =
mkOption {
default = true; # FIXME
description =
''
If enabled, the Nix store in the VM is made writable by
layering an overlay filesystem on top of the host's Nix
store.
'';
};
virtualisation.writableStoreUseTmpfs =
mkOption {
default = true;
description =
''
Use a tmpfs for the writable store instead of writing to the VM's
own filesystem.
'';
};
networking.primaryIPAddress =
mkOption {
default = "";
internal = true;
description = "Primary IP address used in /etc/hosts.";
};
virtualisation.qemu = {
options =
mkOption {
type = types.listOf types.unspecified;
default = [];
example = [ "-vga std" ];
description = "Options passed to QEMU.";
};
consoles = mkOption {
type = types.listOf types.str;
default = let
consoles = [ "${qemuSerialDevice},115200n8" "tty0" ];
in if cfg.graphics then consoles else reverseList consoles;
example = [ "console=tty1" ];
description = ''
The output console devices to pass to the kernel command line via the
<literal>console</literal> parameter, the primary console is the last
item of this list.
By default it enables both serial console and
<literal>tty0</literal>. The preferred console (last one) is based on
the value of <option>virtualisation.graphics</option>.
'';
};
networkingOptions =
mkOption {
default = [
"-net nic,netdev=user.0,model=virtio"
"-netdev user,id=user.0\${QEMU_NET_OPTS:+,$QEMU_NET_OPTS}"
];
type = types.listOf types.str;
description = ''
Networking-related command-line options that should be passed to qemu.
The default is to use userspace networking (slirp).
If you override this option, be advised to keep
''${QEMU_NET_OPTS:+,$QEMU_NET_OPTS} (as seen in the default)
to keep the default runtime behaviour.
'';
};
drives =
mkOption {
type = types.listOf (types.submodule driveOpts);
description = "Drives passed to qemu.";
apply = addDeviceNames;
};
diskInterface =
mkOption {
default = "virtio";
example = "scsi";
nixos/tests: Fix QEMU flags for SCSI disks The ability to specify "-drive if=scsi" has been removed in QEMU version 2.12 (introduced in 3e3b39f173f9abc99da84084a1f4657c9de885bd). Quote from https://wiki.qemu.org/ChangeLog/2.12#Incompatible_changes: > The deprecated way of configuring SCSI devices with "-drive if=scsi" > on x86 has been removed. Use an appropriate SCSI controller together > "-device scsi-hd" or "-device scsi-cd" and a corresponding "-blockdev" > parameter instead. So whenever the diskInterface is "scsi" we use the new way to specify the drive and fall back to the deprecated way for the time being. The reason why I'm not using the new way for "virtio" and "ide" as well is because there is no simple generic way anymore to specify these. This also turns the type of the virtualisation.qemu.diskInterface option to be an enum, so the user knows which values are allowed but we can also make sure the right value is provided to prevent typos. I've tested this against a few non-disk-related NixOS VM tests but also the installer.grub1 test (because it uses "ide" as its drive interface), the installer.simple test (just to be sure it still works with "virtio") and all the tests in nixos/tests/boot.nix. In order to be able to run the grub1 test I had to go back to 8b1cf100cd8badad6e1b6d4650b904b88aa870db (which is a known commit where that test still works) and apply the QEMU update and this very commit, because right now the test is broken. Apart from the tests here in nixpkgs, I also ran another[1] test in another repository which uses the "scsi" disk interface as well (in comparison to most of the installer tests, this one actually failed prior to this commit). All of them now succeed. [1]: https://github.com/openlab-aux/vuizvui/blob/9b5a119972e9c2d327500638d89063f4fce243ec/tests/system/kernel/bfq.nix Signed-off-by: aszlig <aszlig@nix.build> Cc: @edostra, @grahamc, @dezgeg, @abbradar, @ts468
2018-04-29 23:43:17 +00:00
type = types.enum [ "virtio" "scsi" "ide" ];
description = "The interface used for the virtual hard disks.";
};
guestAgent.enable =
mkOption {
default = true;
type = types.bool;
description = ''
Enable the Qemu guest agent.
'';
};
};
virtualisation.useBootLoader =
mkOption {
default = false;
description =
''
If enabled, the virtual machine will be booted using the
regular boot loader (i.e., GRUB 1 or 2). This allows
testing of the boot loader. If
disabled (the default), the VM directly boots the NixOS
kernel and initial ramdisk, bypassing the boot loader
altogether.
'';
};
virtualisation.useEFIBoot =
mkOption {
default = false;
description =
''
If enabled, the virtual machine will provide a EFI boot
manager.
useEFIBoot is ignored if useBootLoader == false.
'';
};
virtualisation.bios =
mkOption {
default = null;
type = types.nullOr types.package;
description =
''
An alternate BIOS (such as <package>qboot</package>) with which to start the VM.
2020-06-08 15:47:46 +00:00
Should contain a file named <literal>bios.bin</literal>.
If <literal>null</literal>, QEMU's builtin SeaBIOS will be used.
'';
};
};
config = {
boot.loader.grub.device = mkVMOverride cfg.bootDevice;
boot.initrd.extraUtilsCommands =
''
# We need mke2fs in the initrd.
copy_bin_and_libs ${pkgs.e2fsprogs}/bin/mke2fs
'';
boot.initrd.postDeviceCommands =
''
# If the disk image appears to be empty, run mke2fs to
# initialise.
FSTYPE=$(blkid -o value -s TYPE ${cfg.bootDevice} || true)
if test -z "$FSTYPE"; then
mke2fs -t ext4 ${cfg.bootDevice}
fi
'';
boot.initrd.postMountCommands =
''
# Mark this as a NixOS machine.
mkdir -p $targetRoot/etc
echo -n > $targetRoot/etc/NIXOS
# Fix the permissions on /tmp.
chmod 1777 $targetRoot/tmp
mkdir -p $targetRoot/boot
${optionalString cfg.writableStore ''
echo "mounting overlay filesystem on /nix/store..."
mkdir -p 0755 $targetRoot/nix/.rw-store/store $targetRoot/nix/.rw-store/work $targetRoot/nix/store
mount -t overlay overlay $targetRoot/nix/store \
-o lowerdir=$targetRoot/nix/.ro-store,upperdir=$targetRoot/nix/.rw-store/store,workdir=$targetRoot/nix/.rw-store/work || fail
''}
'';
# After booting, register the closure of the paths in
# `virtualisation.pathsInNixDB' in the Nix database in the VM. This
# allows Nix operations to work in the VM. The path to the
# registration file is passed through the kernel command line to
# allow `system.build.toplevel' to be included. (If we had a direct
# reference to ${regInfo} here, then we would get a cyclic
# dependency.)
boot.postBootCommands =
''
if [[ "$(cat /proc/cmdline)" =~ regInfo=([^ ]*) ]]; then
${config.nix.package.out}/bin/nix-store --load-db < ''${BASH_REMATCH[1]}
fi
'';
boot.initrd.availableKernelModules =
optional cfg.writableStore "overlay"
++ optional (cfg.qemu.diskInterface == "scsi") "sym53c8xx";
2020-01-28 22:30:41 +00:00
virtualisation.bootDevice = mkDefault (driveDeviceName 1);
virtualisation.pathsInNixDB = [ config.system.build.toplevel ];
# FIXME: Consolidate this one day.
virtualisation.qemu.options = mkMerge [
(mkIf (pkgs.stdenv.isi686 || pkgs.stdenv.isx86_64) [
"-usb" "-device usb-tablet,bus=usb-bus.0"
])
(mkIf (pkgs.stdenv.isAarch32 || pkgs.stdenv.isAarch64) [
"-device virtio-gpu-pci" "-device usb-ehci,id=usb0" "-device usb-kbd" "-device usb-tablet"
])
(mkIf (!cfg.useBootLoader) [
"-kernel ${config.system.build.toplevel}/kernel"
"-initrd ${config.system.build.toplevel}/initrd"
''-append "$(cat ${config.system.build.toplevel}/kernel-params) init=${config.system.build.toplevel}/init regInfo=${regInfo}/registration ${consoles} $QEMU_KERNEL_PARAMS"''
])
(mkIf cfg.useEFIBoot [
"-drive if=pflash,format=raw,unit=0,readonly,file=${efiFirmware}"
"-drive if=pflash,format=raw,unit=1,file=$TMPDIR/EFI_VARS.fd"
])
(mkIf (cfg.bios != null) [
"-bios ${cfg.bios}/bios.bin"
])
(mkIf (!cfg.graphics) [
"-nographic"
])
];
virtualisation.qemu.drives = mkMerge [
[{
name = "root";
file = "$NIX_DISK_IMAGE";
driveExtraOpts.cache = "writeback";
driveExtraOpts.werror = "report";
}]
(mkIf cfg.useBootLoader [
{
name = "boot";
file = "$TMPDIR/disk.img";
driveExtraOpts.media = "disk";
deviceExtraOpts.bootindex = "1";
}
])
(imap0 (idx: _: {
file = "$(pwd)/empty${toString idx}.qcow2";
driveExtraOpts.werror = "report";
}) cfg.emptyDiskImages)
];
# Mount the host filesystem via 9P, and bind-mount the Nix store
# of the host into our own filesystem. We use mkVMOverride to
# allow this module to be applied to "normal" NixOS system
# configuration, where the regular value for the `fileSystems'
# attribute should be disregarded for the purpose of building a VM
# test image (since those filesystems don't exist in the VM).
fileSystems = mkVMOverride (
{ "/".device = cfg.bootDevice;
${if cfg.writableStore then "/nix/.ro-store" else "/nix/store"} =
{ device = "store";
fsType = "9p";
2017-02-13 11:18:10 +00:00
options = [ "trans=virtio" "version=9p2000.L" "cache=loose" ];
neededForBoot = true;
};
"/tmp" = mkIf config.boot.tmpOnTmpfs
{ device = "tmpfs";
fsType = "tmpfs";
neededForBoot = true;
# Sync with systemd's tmp.mount;
options = [ "mode=1777" "strictatime" "nosuid" "nodev" ];
};
"/tmp/xchg" =
{ device = "xchg";
fsType = "9p";
options = [ "trans=virtio" "version=9p2000.L" ];
neededForBoot = true;
};
"/tmp/shared" =
{ device = "shared";
fsType = "9p";
options = [ "trans=virtio" "version=9p2000.L" ];
neededForBoot = true;
};
} // optionalAttrs (cfg.writableStore && cfg.writableStoreUseTmpfs)
{ "/nix/.rw-store" =
{ fsType = "tmpfs";
options = [ "mode=0755" ];
neededForBoot = true;
};
} // optionalAttrs cfg.useBootLoader
{ "/boot" =
{ device = "${lookupDriveDeviceName "boot" cfg.qemu.drives}2";
fsType = "vfat";
options = [ "ro" ];
noCheck = true; # fsck fails on a r/o filesystem
};
});
swapDevices = mkVMOverride [ ];
boot.initrd.luks.devices = mkVMOverride {};
# Don't run ntpd in the guest. It should get the correct time from KVM.
services.timesyncd.enable = false;
services.qemuGuest.enable = cfg.qemu.guestAgent.enable;
system.build.vm = pkgs.runCommand "nixos-vm" { preferLocalBuild = true; }
''
mkdir -p $out/bin
ln -s ${config.system.build.toplevel} $out/system
ln -s ${pkgs.writeScript "run-nixos-vm" startVM} $out/bin/run-${vmName}-vm
'';
# When building a regular system configuration, override whatever
# video driver the host uses.
services.xserver.videoDrivers = mkVMOverride [ "modesetting" ];
services.xserver.defaultDepth = mkVMOverride 0;
services.xserver.resolutions = mkVMOverride [ { x = 1024; y = 768; } ];
services.xserver.monitorSection =
''
# Set a higher refresh rate so that resolutions > 800x600 work.
HorizSync 30-140
VertRefresh 50-160
'';
# Wireless won't work in the VM.
networking.wireless.enable = mkVMOverride false;
services.connman.enable = mkVMOverride false;
# Speed up booting by not waiting for ARP.
networking.dhcpcd.extraConfig = "noarp";
networking.usePredictableInterfaceNames = false;
system.requiredKernelConfig = with config.lib.kernelConfig;
[ (isEnabled "VIRTIO_BLK")
(isEnabled "VIRTIO_PCI")
(isEnabled "VIRTIO_NET")
(isEnabled "EXT4_FS")
(isYes "BLK_DEV")
(isYes "PCI")
(isYes "EXPERIMENTAL")
(isYes "NETDEVICES")
(isYes "NET_CORE")
(isYes "INET")
(isYes "NETWORK_FILESYSTEMS")
] ++ optional (!cfg.graphics) [
(isYes "SERIAL_8250_CONSOLE")
(isYes "SERIAL_8250")
];
};
}