Merge branch 'master' into systemd-219

Conflicts:
	nixos/modules/system/boot/systemd.nix
	pkgs/applications/networking/p2p/transmission/default.nix
	pkgs/development/libraries/libseccomp/default.nix
	pkgs/os-specific/linux/systemd/default.nix
	pkgs/top-level/all-packages.nix
This commit is contained in:
Eelco Dolstra 2015-09-07 21:28:33 +02:00
commit 916793cf13
1488 changed files with 63830 additions and 38515 deletions

View File

@ -1 +1 @@
15.07
16.03

View File

@ -33,8 +33,10 @@ For pull-requests, please rebase onto nixpkgs `master`.
* [Manual (NixOS)](https://nixos.org/nixos/manual/)
* [Continuous package builds for unstable/master](https://hydra.nixos.org/jobset/nixos/trunk-combined)
* [Continuous package builds for 14.12 release](https://hydra.nixos.org/jobset/nixos/release-14.12)
* [Continuous package builds for 15.09 release](https://hydra.nixos.org/jobset/nixos/release-15.09)
* [Tests for unstable/master](https://hydra.nixos.org/job/nixos/trunk-combined/tested#tabs-constituents)
* [Tests for 14.12 release](https://hydra.nixos.org/job/nixos/release-14.12/tested#tabs-constituents)
* [Tests for 15.09 release](https://hydra.nixos.org/job/nixos/release-15.09/tested#tabs-constituents)
Communication:

View File

@ -85,6 +85,44 @@ in ...</programlisting>
</section>
<section xml:id="sec-pkg-overrideDerivation">
<title>&lt;pkg&gt;.overrideDerivation</title>
<para>
The function <varname>overrideDerivation</varname> is usually available for all the
derivations in the nixpkgs expression (<varname>pkgs</varname>).
</para>
<para>
It is used to create a new derivation by overriding the attributes of
the original derivation according to the given function.
</para>
<para>
Example usage:
<programlisting>mySed = pkgs.gnused.overrideDerivation (oldAttrs: {
name = "sed-4.2.2-pre";
src = fetchurl {
url = ftp://alpha.gnu.org/gnu/sed/sed-4.2.2-pre.tar.bz2;
sha256 = "11nq06d131y4wmf3drm0yk502d2xc6n5qy82cg88rb9nqd2lj41k";
};
patches = [];
});</programlisting>
</para>
<para>
In the above example, the name, src and patches of the derivation
will be overridden, while all other attributes will be retained from the
original derivation.
</para>
<para>
The argument <varname>oldAttrs</varname> is used to refer to the attribute set of
the original derivation.
</para>
</section>
<section xml:id="sec-lib-makeOverridable">
<title>lib.makeOverridable</title>
@ -117,4 +155,119 @@ c = lib.makeOverridable f { a = 1; b = 2; }</programlisting>
</section>
<section xml:id="sec-fhs-environments">
<title>buildFHSChrootEnv/buildFHSUserEnv</title>
<para>
<function>buildFHSChrootEnv</function> and
<function>buildFHSUserEnv</function> provide a way to build and run
FHS-compatible lightweight sandboxes. They get their own isolated root with
binded <filename>/nix/store</filename>, so their footprint in terms of disk
space needed is quite small. This allows one to run software which is hard or
unfeasible to patch for NixOS -- 3rd-party source trees with FHS assumptions,
games distributed as tarballs, software with integrity checking and/or external
self-updated binaries.
</para>
<para>
<function>buildFHSChrootEnv</function> allows to create persistent
environments, which can be constructed, deconstructed and entered by
multiple users at once. A downside is that it requires
<literal>root</literal> access for both those who create and destroy and
those who enter it. It can be useful to create environments for daemons that
one can enter and observe.
</para>
<para>
<function>buildFHSUserEnv</function> uses Linux namespaces feature to create
temporary lightweight environments which are destroyed after all child
processes exit. It does not require root access, and can be useful to create
sandboxes and wrap applications.
</para>
<para>
Those functions both rely on <function>buildFHSEnv</function>, which creates
an actual directory structure given a list of necessary packages and extra
build commands.
<function>buildFHSChrootEnv</function> and <function>buildFHSUserEnv</function>
both accept those arguments which are passed to
<function>buildFHSEnv</function>:
</para>
<variablelist>
<varlistentry>
<term><literal>name</literal></term>
<listitem><para>Environment name.</para></listitem>
</varlistentry>
<varlistentry>
<term><literal>targetPkgs</literal></term>
<listitem><para>Packages to be installed for the main host's architecture
(i.e. x86_64 on x86_64 installations).</para></listitem>
</varlistentry>
<varlistentry>
<term><literal>multiPkgs</literal></term>
<listitem><para>Packages to be installed for all architectures supported by
a host (i.e. i686 and x86_64 on x86_64 installations).</para></listitem>
</varlistentry>
<varlistentry>
<term><literal>extraBuildCommands</literal></term>
<listitem><para>Additional commands to be executed for finalizing the
directory structure.</para></listitem>
</varlistentry>
<varlistentry>
<term><literal>extraBuildCommandsMulti</literal></term>
<listitem><para>Like <literal>extraBuildCommandsMulti</literal>, but
executed only on multilib architectures.</para></listitem>
</varlistentry>
</variablelist>
<para>
Additionally, <function>buildFHSUserEnv</function> accepts
<literal>runScript</literal> parameter, which is a command that would be
executed inside the sandbox and passed all the command line arguments. It
default to <literal>bash</literal>.
One can create a simple environment using a <literal>shell.nix</literal>
like that:
</para>
<programlisting><![CDATA[
{ pkgs ? import <nixpkgs> {} }:
(pkgs.buildFHSUserEnv {
name = "simple-x11-env";
targetPkgs = pkgs: (with pkgs;
[ udev
alsaLib
]) ++ (with pkgs.xlibs;
[ libX11
libXcursor
libXrandr
]);
multiPkgs = pkgs: (with pkgs;
[ udev
alsaLib
]) ++ (with [];
runScript = "bash";
}).env
]]></programlisting>
<para>
Running <literal>nix-shell</literal> would then drop you into a shell with
these libraries and binaries available. You can use this to run
closed-source applications which expect FHS structure without hassles:
simply change <literal>runScript</literal> to the application path,
e.g. <filename>./bin/start.sh</filename> -- relative paths are supported.
</para>
</section>
</chapter>

View File

@ -92,18 +92,18 @@ error: attribute haskellPackages in selection path
</para>
<programlisting>
$ nix-env -qaP coreutils
nixos.pkgs.coreutils coreutils-8.23
nixos.coreutils coreutils-8.23
</programlisting>
<para>
If your system responds like that (most NixOS installatios will),
If your system responds like that (most NixOS installations will),
then the attribute path to <literal>haskellPackages</literal> is
<literal>nixos.pkgs.haskellPackages</literal>. Thus, if you want to
<literal>nixos.haskellPackages</literal>. Thus, if you want to
use <literal>nix-env</literal> without giving an explicit
<literal>-f</literal> flag, then that's the way to do it:
</para>
<programlisting>
$ nix-env -qaP -A nixos.pkgs.haskellPackages
$ nix-env -iA nixos.pkgs.haskellPackages.cabal-install
$ nix-env -qaP -A nixos.haskellPackages
$ nix-env -iA nixos.haskellPackages.cabal-install
</programlisting>
<para>
Our current default compiler is GHC 7.10.x and the
@ -600,6 +600,12 @@ $ nix-shell &quot;&lt;nixpkgs&gt;&quot; -A haskellPackages.bar.env
};
}
</programlisting>
<para>
Then, replace instances of <literal>haskellPackages</literal> in the
<literal>cabal2nix</literal>-generated <literal>default.nix</literal>
or <literal>shell.nix</literal> files with
<literal>profiledHaskellPackages</literal>.
</para>
</section>
<section xml:id="how-to-override-package-versions-in-a-compiler-specific-package-set">
<title>How to override package versions in a compiler-specific
@ -712,7 +718,7 @@ text-1.2.0.4-98506efb1b9ada233bb5c2b2db516d91
</para>
<programlisting>
# nix-store -q --referrers /nix/store/*-haskell-text-1.2.0.4 \
| nix-store --repair-path --option binary-caches http://hydra.nixos.org
| xargs -L 1 nix-store --repair-path --option binary-caches http://hydra.nixos.org
</programlisting>
<para>
If you're using additional Hydra servers other than
@ -755,4 +761,69 @@ export NIX_CFLAGS_LINK=&quot;-L/usr/lib&quot;
</section>
</section>
<section xml:id="other-resources">
<title>Other resources</title>
<itemizedlist>
<listitem>
<para>
The Youtube video
<link xlink:href="https://www.youtube.com/watch?v=BsBhi_r-OeE">Nix
Loves Haskell</link> provides an introduction into Haskell NG
aimed at beginners. The slides are available at
http://cryp.to/nixos-meetup-3-slides.pdf and also -- in a form
ready for cut &amp; paste -- at
https://github.com/NixOS/cabal2nix/blob/master/doc/nixos-meetup-3-slides.md.
</para>
</listitem>
<listitem>
<para>
Another Youtube video is
<link xlink:href="https://www.youtube.com/watch?v=mQd3s57n_2Y">Escaping
Cabal Hell with Nix</link>, which discusses the subject of
Haskell development with Nix but also provides a basic
introduction to Nix as well, i.e. it's suitable for viewers with
almost no prior Nix experience.
</para>
</listitem>
<listitem>
<para>
Oliver Charles wrote a very nice
<link xlink:href="http://wiki.ocharles.org.uk/Nix">Tutorial how to
develop Haskell packages with Nix</link>.
</para>
</listitem>
<listitem>
<para>
The <emphasis>Journey into the Haskell NG
infrastructure</emphasis> series of postings describe the new
Haskell infrastructure in great detail:
</para>
<itemizedlist>
<listitem>
<para>
<link xlink:href="http://lists.science.uu.nl/pipermail/nix-dev/2015-January/015591.html">Part
1</link> explains the differences between the old and the
new code and gives instructions how to migrate to the new
setup.
</para>
</listitem>
<listitem>
<para>
<link xlink:href="http://lists.science.uu.nl/pipermail/nix-dev/2015-January/015608.html">Part
2</link> looks in-depth at how to tweak and configure your
setup by means of overrides.
</para>
</listitem>
<listitem>
<para>
<link xlink:href="http://lists.science.uu.nl/pipermail/nix-dev/2015-April/016912.html">Part
3</link> describes the infrastructure that keeps the
Haskell package set in Nixpkgs up-to-date.
</para>
</listitem>
</itemizedlist>
</listitem>
</itemizedlist>
</section>
</chapter>

View File

@ -1,3 +1,4 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-language-support">
@ -341,7 +342,14 @@ twisted = buildPythonPackage {
<para>By default <varname>doCheck = true</varname> is set and tests are run with
<literal>${python.interpreter} setup.py test</literal> command in <varname>checkPhase</varname>.</para>
<para><varname>propagatedBuildInputs</varname> packages are propagated to user environment.</para>
<para>
As in Perl, dependencies on other Python packages can be specified in the
<varname>buildInputs</varname> and
<varname>propagatedBuildInputs</varname> attributes. If something is
exclusively a build-time dependency, use
<varname>buildInputs</varname>; if its (also) a runtime dependency,
use <varname>propagatedBuildInputs</varname>.
</para>
<para>
By default <varname>meta.platforms</varname> is set to the same value
@ -456,6 +464,27 @@ python.buildEnv.override {
with wrapped binaries in <filename>bin/</filename>.
</para>
<para>
You can also use <varname>env</varname> attribute to create local
environments with needed packages installed (somewhat comparable to
<literal>virtualenv</literal>). For example, with the following
<filename>shell.nix</filename>:
<programlisting language="nix">
<![CDATA[with import <nixpkgs> {};
(python3.buildEnv.override {
extraLibs = with python3Packages;
[ numpy
requests
];
}).env]]>
</programlisting>
Running <command>nix-shell</command> will drop you into a shell where
<command>python</command> will have specified packages in its path.
</para>
<variablelist>
<title>
<function>python.buildEnv</function> arguments

View File

@ -219,5 +219,151 @@ you should modify
</section>
-->
<!--============================================================-->
<section xml:id="sec-eclipse">
<title>Eclipse</title>
<para>
The Nix expressions related to the Eclipse platform and IDE are in
<link xlink:href="https://github.com/NixOS/nixpkgs/blob/master/pkgs/applications/editors/eclipse"><filename>pkgs/applications/editors/eclipse</filename></link>.
</para>
<para>
Nixpkgs provides a number of packages that will install Eclipse in
its various forms, these range from the bare-bones Eclipse
Platform to the more fully featured Eclipse SDK or Scala-IDE
packages and multiple version are often available. It is possible
to list available Eclipse packages by issuing the command:
<screen>
$ nix-env -f '&lt;nixpkgs&gt;' -qaP -A eclipses --description
</screen>
Once an Eclipse variant is installed it can be run using the
<command>eclipse</command> command, as expected. From within
Eclipse it is then possible to install plugins in the usual manner
by either manually specifying an Eclipse update site or by
installing the Marketplace Client plugin and using it to discover
and install other plugins. This installation method provides an
Eclipse installation that closely resemble a manually installed
Eclipse.
</para>
<para>
If you prefer to install plugins in a more declarative manner then
Nixpkgs also offer a number of Eclipse plugins that can be
installed in an <emphasis>Eclipse environment</emphasis>. This
type of environment is created using the function
<varname>eclipseWithPlugins</varname> found inside the
<varname>nixpkgs.eclipses</varname> attribute set. This function
takes as argument <literal>{ eclipse, plugins ? [], jvmArgs ? []
}</literal> where <varname>eclipse</varname> is a one of the
Eclipse packages described above, <varname>plugins</varname> is a
list of plugin derivations, and <varname>jvmArgs</varname> is a
list of arguments given to the JVM running the Eclipse. For
example, say you wish to install the latest Eclipse Platform with
the popular Eclipse Color Theme plugin and also allow Eclipse to
use more RAM. You could then add
<screen>
packageOverrides = pkgs: {
myEclipse = with pkgs.eclipses; eclipseWithPlugins {
eclipse = eclipse-platform;
jvmArgs = [ "-Xmx2048m" ];
plugins = [ plugins.color-theme ];
};
}
</screen>
to your Nixpkgs configuration
(<filename>~/.nixpkgs/config.nix</filename>) and install it by
running <command>nix-env -f '&lt;nixpkgs&gt;' -iA
myEclipse</command> and afterward run Eclipse as usual. It is
possible to find out which plugins are available for installation
using <varname>eclipseWithPlugins</varname> by running
<screen>
$ nix-env -f '&lt;nixpkgs&gt;' -qaP -A eclipses.plugins --description
</screen>
</para>
<para>
If there is a need to install plugins that are not available in
Nixpkgs then it may be possible to define these plugins outside
Nixpkgs using the <varname>buildEclipseUpdateSite</varname> and
<varname>buildEclipsePlugin</varname> functions found in the
<varname>nixpkgs.eclipses.plugins</varname> attribute set. Use the
<varname>buildEclipseUpdateSite</varname> function to install a
plugin distributed as an Eclipse update site. This function takes
<literal>{ name, src }</literal> as argument where
<literal>src</literal> indicates the Eclipse update site archive.
All Eclipse features and plugins within the downloaded update site
will be installed. When an update site archive is not available
then the <varname>buildEclipsePlugin</varname> function can be
used to install a plugin that consists of a pair of feature and
plugin JARs. This function takes an argument <literal>{ name,
srcFeature, srcPlugin }</literal> where
<literal>srcFeature</literal> and <literal>srcPlugin</literal> are
the feature and plugin JARs, respectively.
</para>
<para>
Expanding the previous example with two plugins using the above
functions we have
<screen>
packageOverrides = pkgs: {
myEclipse = with pkgs.eclipses; eclipseWithPlugins {
eclipse = eclipse-platform;
jvmArgs = [ "-Xmx2048m" ];
plugins = [
plugins.color-theme
(plugins.buildEclipsePlugin {
name = "myplugin1-1.0";
srcFeature = fetchurl {
url = "http://…/features/myplugin1.jar";
sha256 = "123…";
};
srcPlugin = fetchurl {
url = "http://…/plugins/myplugin1.jar";
sha256 = "123…";
};
});
(plugins.buildEclipseUpdateSite {
name = "myplugin2-1.0";
src = fetchurl {
stripRoot = false;
url = "http://…/myplugin2.zip";
sha256 = "123…";
};
});
];
};
}
</screen>
</para>
</section>
<section xml:id="sec-elm">
<title>Elm</title>
<para>
The Nix expressions for Elm reside in
<filename>pkgs/development/compilers/elm</filename>. They are generated
automatically by <command>update-elm.rb</command> script. One should
specify versions of Elm packages inside the script, clear the
<filename>packages</filename> directory and run the script from inside it.
<literal>elm-reactor</literal> is special because it also has Elm package
dependencies. The process is not automated very much for now -- you should
get the <literal>elm-reactor</literal> source tree (e.g. with
<command>nix-shell</command>) and run <command>elm2nix.rb</command> inside
it. Place the resulting <filename>package.nix</filename> file into
<filename>packages/elm-reactor-elm.nix</filename>.
</para>
</section>
</chapter>

View File

@ -6,7 +6,6 @@ with {
inherit (import ./default.nix) fold;
inherit (import ./strings.nix) concatStringsSep;
inherit (import ./lists.nix) concatMap concatLists all deepSeqList;
inherit (import ./misc.nix) maybeAttr;
};
rec {
@ -76,7 +75,7 @@ rec {
=> { foo = 1; }
*/
filterAttrs = pred: set:
listToAttrs (fold (n: ys: let v = set.${n}; in if pred n v then [(nameValuePair n v)] ++ ys else ys) [] (attrNames set));
listToAttrs (concatMap (name: let v = set.${name}; in if pred name v then [(nameValuePair name v)] else []) (attrNames set));
/* foldAttrs: apply fold functions to values grouped by key. Eg accumulate values as list:
@ -86,7 +85,7 @@ rec {
foldAttrs = op: nul: list_of_attrs:
fold (n: a:
fold (name: o:
o // (listToAttrs [{inherit name; value = op n.${name} (maybeAttr name nul a); }])
o // (listToAttrs [{inherit name; value = op n.${name} (a.${name} or nul); }])
) a (attrNames n)
) {} list_of_attrs;
@ -222,6 +221,16 @@ rec {
isDerivation = x: isAttrs x && x ? type && x.type == "derivation";
/* Convert a store path to a fake derivation. */
toDerivation = path:
let path' = builtins.storePath path; in
{ type = "derivation";
name = builtins.unsafeDiscardStringContext (builtins.substring 33 (-1) (baseNameOf path'));
outPath = path';
outputs = [ "out" ];
};
/* If the Boolean `cond' is true, return the attribute set `as',
otherwise an empty attribute set. */
optionalAttrs = cond: as: if cond then as else {};

View File

@ -1,6 +1,8 @@
let
lib = import ./default.nix;
inherit (builtins) attrNames isFunction;
in
rec {
@ -49,10 +51,6 @@ rec {
else { }));
# usage: (you can use override multiple times)
# let d = makeOverridable stdenv.mkDerivation { name = ..; buildInputs; }
# noBuildInputs = d.override { buildInputs = []; }
# additionalBuildInputs = d.override ( args : args // { buildInputs = args.buildInputs ++ [ additional ]; } )
makeOverridable = f: origArgs:
let
ff = f origArgs;
@ -60,24 +58,16 @@ rec {
in
if builtins.isAttrs ff then (ff //
{ override = newArgs: makeOverridable f (overrideWith newArgs);
deepOverride = newArgs:
makeOverridable f (lib.overrideExisting (lib.mapAttrs (deepOverrider newArgs) origArgs) newArgs);
overrideDerivation = fdrv:
makeOverridable (args: overrideDerivation (f args) fdrv) origArgs;
})
else if builtins.isFunction ff then
{ override = newArgs: makeOverridable f (overrideWith newArgs);
__functor = self: ff;
deepOverride = throw "deepOverride not yet supported for functors";
overrideDerivation = throw "overrideDerivation not yet supported for functors";
}
else ff;
deepOverrider = newArgs: name: x: if builtins.isAttrs x then (
if x ? deepOverride then (x.deepOverride newArgs) else
if x ? override then (x.override newArgs) else
x) else x;
/* Call the package function in the file `fn' with the required
arguments automatically. The function is called with the
@ -102,12 +92,28 @@ rec {
*/
callPackageWith = autoArgs: fn: args:
let
f = if builtins.isFunction fn then fn else import fn;
f = if builtins.isFunction fn then fn else import fn;
auto = builtins.intersectAttrs (builtins.functionArgs f) autoArgs;
in makeOverridable f (auto // args);
/* Add attributes to each output of a derivation without changing the derivation itself */
/* Like callPackage, but for a function that returns an attribute
set of derivations. The override function is added to the
individual attributes. */
callPackagesWith = autoArgs: fn: args:
let
f = if builtins.isFunction fn then fn else import fn;
auto = builtins.intersectAttrs (builtins.functionArgs f) autoArgs;
finalArgs = auto // args;
pkgs = f finalArgs;
mkAttrOverridable = name: pkg: pkg // {
override = newArgs: mkAttrOverridable name (f (finalArgs // newArgs)).${name};
};
in lib.mapAttrs mkAttrOverridable pkgs;
/* Add attributes to each output of a derivation without changing
the derivation itself. */
addPassthru = drv: passthru:
let
outputs = drv.outputs or [ "out" ];

View File

@ -11,7 +11,7 @@ let
types = import ./types.nix;
meta = import ./meta.nix;
debug = import ./debug.nix;
misc = import ./misc.nix;
misc = import ./deprecated.nix;
maintainers = import ./maintainers.nix;
platforms = import ./platforms.nix;
systems = import ./systems.nix;

View File

@ -29,7 +29,6 @@ rec {
} ));
withStdOverrides = base // {
override = base.passthru.function;
deepOverride = a : (base.passthru.function ((lib.mapAttrs (lib.deepOverrider a) base.passthru.args) // a));
} ;
in
withStdOverrides;
@ -203,8 +202,6 @@ rec {
in
work startSet [] [];
genericClosure = builtins.genericClosure or lazyGenericClosure;
innerModifySumArgs = f: x: a: b: if b == null then (f a b) // x else
innerModifySumArgs f x (a // b);
modifySumArgs = f: x: innerModifySumArgs f x {};

View File

@ -4,7 +4,7 @@ with import ./trivial.nix;
rec {
inherit (builtins) head tail length isList elemAt concatLists filter elem;
inherit (builtins) head tail length isList elemAt concatLists filter elem genList;
# Create a list consisting of a single element. `singleton x' is
@ -38,16 +38,24 @@ rec {
in foldl' (length list - 1);
# map with index: `imap (i: v: "${v}-${toString i}") ["a" "b"] ==
# ["a-1" "b-2"]'
imap = f: list:
let
len = length list;
imap' = n:
if n == len
then []
else [ (f (n + 1) (elemAt list n)) ] ++ imap' (n + 1);
in imap' 0;
# Strict version of foldl.
foldl' = builtins.foldl' or foldl;
# Map with index: `imap (i: v: "${v}-${toString i}") ["a" "b"] ==
# ["a-1" "b-2"]'. FIXME: why does this start to count at 1?
imap =
if builtins ? genList then
f: list: genList (n: f (n + 1) (elemAt list n)) (length list)
else
f: list:
let
len = length list;
imap' = n:
if n == len
then []
else [ (f (n + 1) (elemAt list n)) ] ++ imap' (n + 1);
in imap' 0;
# Map and concatenate the result.
@ -59,7 +67,7 @@ rec {
# == [1 2 3 4 5]' and `flatten 1 == [1]'.
flatten = x:
if isList x
then fold (x: y: (flatten x) ++ y) [] x
then foldl' (x: y: x ++ (flatten y)) [] x
else [x];
@ -86,17 +94,17 @@ rec {
# Return true iff function `pred' returns true for at least element
# of `list'.
any = pred: fold (x: y: if pred x then true else y) false;
any = builtins.any or (pred: fold (x: y: if pred x then true else y) false);
# Return true iff function `pred' returns true for all elements of
# `list'.
all = pred: fold (x: y: if pred x then y else false) true;
all = builtins.all or (pred: fold (x: y: if pred x then y else false) true);
# Count how many times function `pred' returns true for the elements
# of `list'.
count = pred: fold (x: c: if pred x then c + 1 else c) 0;
count = pred: foldl' (c: x: if pred x then c + 1 else c) 0;
# Return a singleton list or an empty list, depending on a boolean
@ -116,10 +124,17 @@ rec {
# Return a list of integers from `first' up to and including `last'.
range = first: last:
if last < first
then []
else [first] ++ range (first + 1) last;
range =
if builtins ? genList then
first: last:
if first > last
then []
else genList (n: first + n) (last - first + 1)
else
first: last:
if last < first
then []
else [first] ++ range (first + 1) last;
# Partition the elements of a list in two lists, `right' and
@ -132,30 +147,37 @@ rec {
) { right = []; wrong = []; };
zipListsWith = f: fst: snd:
let
len1 = length fst;
len2 = length snd;
len = if len1 < len2 then len1 else len2;
zipListsWith' = n:
if n != len then
[ (f (elemAt fst n) (elemAt snd n)) ]
++ zipListsWith' (n + 1)
else [];
in zipListsWith' 0;
zipListsWith =
if builtins ? genList then
f: fst: snd: genList (n: f (elemAt fst n) (elemAt snd n)) (min (length fst) (length snd))
else
f: fst: snd:
let
len = min (length fst) (length snd);
zipListsWith' = n:
if n != len then
[ (f (elemAt fst n) (elemAt snd n)) ]
++ zipListsWith' (n + 1)
else [];
in zipListsWith' 0;
zipLists = zipListsWith (fst: snd: { inherit fst snd; });
# Reverse the order of the elements of a list. FIXME: O(n^2)!
reverseList = fold (e: acc: acc ++ [ e ]) [];
# Reverse the order of the elements of a list.
reverseList =
if builtins ? genList then
xs: let l = length xs; in genList (n: elemAt xs (l - n - 1)) l
else
fold (e: acc: acc ++ [ e ]) [];
# Sort a list based on a comparator function which compares two
# elements and returns true if the first argument is strictly below
# the second argument. The returned list is sorted in an increasing
# order. The implementation does a quick-sort.
sort = strictLess: list:
sort = builtins.sort or (
strictLess: list:
let
len = length list;
first = head list;
@ -169,31 +191,50 @@ rec {
pivot = pivot' 1 { left = []; right = []; };
in
if len < 2 then list
else (sort strictLess pivot.left) ++ [ first ] ++ (sort strictLess pivot.right);
else (sort strictLess pivot.left) ++ [ first ] ++ (sort strictLess pivot.right));
# Return the first (at most) N elements of a list.
take = count: list:
let
len = length list;
take' = n:
if n == len || n == count
then []
else
[ (elemAt list n) ] ++ take' (n + 1);
in take' 0;
take =
if builtins ? genList then
count: sublist 0 count
else
count: list:
let
len = length list;
take' = n:
if n == len || n == count
then []
else
[ (elemAt list n) ] ++ take' (n + 1);
in take' 0;
# Remove the first (at most) N elements of a list.
drop = count: list:
let
len = length list;
drop' = n:
if n == -1 || n < count
then []
else
drop' (n - 1) ++ [ (elemAt list n) ];
in drop' (len - 1);
drop =
if builtins ? genList then
count: list: sublist count (length list) list
else
count: list:
let
len = length list;
drop' = n:
if n == -1 || n < count
then []
else
drop' (n - 1) ++ [ (elemAt list n) ];
in drop' (len - 1);
# Return a list consisting of at most count elements of list,
# starting at index start.
sublist = start: count: list:
let len = length list; in
genList
(n: elemAt list (n + start))
(if start >= len then 0
else if start + count > len then len - start
else count);
# Return the last element of a list.
@ -205,25 +246,13 @@ rec {
init = list: assert list != []; take (length list - 1) list;
# Zip two lists together.
zipTwoLists = xs: ys:
let
len1 = length xs;
len2 = length ys;
len = if len1 < len2 then len1 else len2;
zipTwoLists' = n:
if n != len then
[ { first = elemAt xs n; second = elemAt ys n; } ]
++ zipTwoLists' (n + 1)
else [];
in zipTwoLists' 0;
deepSeqList = xs: y: if any (x: deepSeq x false) xs then y else y;
crossLists = f: foldl (fs: args: concatMap (f: map f args) fs) [f];
# Remove duplicate elements from the list
# Remove duplicate elements from the list. O(n^2) complexity.
unique = list:
if list == [] then
[]
@ -233,9 +262,12 @@ rec {
xs = unique (drop 1 list);
in [x] ++ remove x xs;
# Intersects list 'e' and another list
# Intersects list 'e' and another list. O(nm) complexity.
intersectLists = e: filter (x: elem x e);
# Subtracts list 'e' from another list
# Subtracts list 'e' from another list. O(nm) complexity.
subtractLists = e: filter (x: !(elem x e));
}

View File

@ -14,6 +14,7 @@
aflatter = "Alexander Flatter <flatter@fastmail.fm>";
aherrmann = "Andreas Herrmann <andreash87@gmx.ch>";
ak = "Alexander Kjeldaas <ak@formalprivacy.com>";
akaWolf = "Artjom Vejsel <akawolf0@gmail.com>";
akc = "Anders Claesson <akc@akc.is>";
algorith = "Dries Van Daele <dries_van_daele@telenet.be>";
all = "Nix Committers <nix-commits@lists.science.uu.nl>";
@ -33,6 +34,7 @@
auntie = "Jonathan Glines <auntieNeo@gmail.com>";
avnik = "Alexander V. Nikolaev <avn@avnik.info>";
aycanirican = "Aycan iRiCAN <iricanaycan@gmail.com>";
badi = "Badi' Abdul-Wahid <abdulwahidc@gmail.com>";
balajisivaraman = "Balaji Sivaraman<sivaraman.balaji@gmail.com>";
bbenoist = "Baptist BENOIST <return_0@live.com>";
bcarrell = "Brandon Carrell <brandoncarrell@gmail.com>";
@ -66,12 +68,15 @@
couchemar = "Andrey Pavlov <couchemar@yandex.ru>";
cstrahan = "Charles Strahan <charles.c.strahan@gmail.com>";
cwoac = "Oliver Matthews <oliver@codersoffortune.net>";
DamienCassou = "Damien Cassou <damien.cassou@gmail.com>";
DamienCassou = "Damien Cassou <damien@cassou.me>";
davidrusu = "David Rusu <davidrusu.me@gmail.com>";
dbohdan = "Danyil Bohdan <danyil.bohdan@gmail.com>";
DerGuteMoritz = "Moritz Heidkamp <moritz@twoticketsplease.de>";
deepfire = "Kosyrev Serge <_deepfire@feelingofgreen.ru>";
desiderius = "Didier J. Devroye <didier@devroye.name>";
devhell = "devhell <\"^\"@regexmail.net>";
dezgeg = "Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>";
dfoxfranke = "Daniel Fox Franke <dfoxfranke@gmail.com>";
dmalikov = "Dmitry Malikov <malikov.d.y@gmail.com>";
doublec = "Chris Double <chris.double@double.co.nz>";
ederoyd46 = "Matthew Brown <matt@ederoyd.co.uk>";
@ -81,6 +86,7 @@
eikek = "Eike Kettner <eike.kettner@posteo.de>";
ellis = "Ellis Whitehead <nixos@ellisw.net>";
emery = "Emery Hemingway <emery@vfemail.net>";
epitrochoid = "Mabry Cervin <mpcervin@uncg.edu>";
ericbmerritt = "Eric Merritt <eric@afiniate.com>";
ertes = "Ertugrul Söylemez <ertesx@gmx.de>";
exlevan = "Alexey Levan <exlevan@gmail.com>";
@ -118,6 +124,7 @@
jagajaga = "Arseniy Seroka <ars.seroka@gmail.com>";
jb55 = "William Casarin <bill@casarin.me>";
jcumming = "Jack Cummings <jack@mudshark.org>";
jefdaj = "Jeffrey David Johnson <jefdaj@gmail.com>";
jfb = "James Felix Black <james@yamtime.com>";
jgeerds = "Jascha Geerds <jg@ekby.de>";
jirkamarsik = "Jirka Marsik <jiri.marsik89@gmail.com>";
@ -129,12 +136,15 @@
jwiegley = "John Wiegley <johnw@newartisans.com>";
jwilberding = "Jordan Wilberding <jwilberding@afiniate.com>";
jzellner = "Jeff Zellner <jeffz@eml.cc>";
kamilchm = "Kamil Chmielewski <kamil.chm@gmail.com>";
kkallio = "Karn Kallio <tierpluspluslists@gmail.com>";
koral = "Koral <koral@mailoo.org>";
kovirobi = "Kovacsics Robert <kovirobi@gmail.com>";
kragniz = "Louis Taylor <kragniz@gmail.com>";
ktosiek = "Tomasz Kontusz <tomasz.kontusz@gmail.com>";
lassulus = "Lassulus <lassulus@gmail.com>";
layus = "Guillaume Maudoux <layus.on@gmail.com>";
lebastr = "Alexander Lebedev <lebastr@gmail.com>";
leonardoce = "Leonardo Cecchi <leonardo.cecchi@gmail.com>";
lethalman = "Luca Bruno <lucabru@src.gnome.org>";
lhvwb = "Nathaniel Baxter <nathaniel.baxter@gmail.com>";
@ -143,15 +153,19 @@
linus = "Linus Arver <linusarver@gmail.com>";
lnl7 = "Daiderd Jordan <daiderd@gmail.com>";
lovek323 = "Jason O'Conal <jason@oconal.id.au>";
lowfatcomputing = "Andreas Wagner <andreas.wagner@lowfatcomputing.org>";
lsix = "Lancelot SIX <lsix@lancelotsix.com>";
ludo = "Ludovic Courtès <ludo@gnu.org>";
madjar = "Georges Dubus <georges.dubus@compiletoi.net>";
magnetophon = "Bart Brouns <bart@magnetophon.nl>";
mahe = "Matthias Herrmann <matthias.mh.herrmann@gmail.com>";
makefu = "Felix Richter <makefu@syntax-fehler.de>";
malyn = "Michael Alyn Miller <malyn@strangeGizmo.com>";
manveru = "Michael Fellinger <m.fellinger@gmail.com>";
marcweber = "Marc Weber <marco-oweber@gmx.de>";
maurer = "Matthew Maurer <matthew.r.maurer+nix@gmail.com>";
matejc = "Matej Cotman <cotman.matej@gmail.com>";
mathnerd314 = "Mathnerd314 <mathnerd314.gph+hs@gmail.com>";
matthiasbeyer = "Matthias Beyer <mail@beyermatthias.de>";
mbakke = "Marius Bakke <ymse@tuta.io>";
meditans = "Carlo Nucera <meditans@gmail.com>";
@ -173,6 +187,7 @@
nslqqq = "Nikita Mikhailov <nslqqq@gmail.com>";
obadz = "obadz <dav-nixos@odav.org>";
ocharles = "Oliver Charles <ollie@ocharles.org.uk>";
odi = "Oliver Dunkl <oliver.dunkl@gmail.com>";
offline = "Jaka Hudoklin <jakahudoklin@gmail.com>";
olcai = "Erik Timan <dev@timan.info>";
orbitz = "Malcolm Matalka <mmatalka@gmail.com>";
@ -193,6 +208,7 @@
pmahoney = "Patrick Mahoney <pat@polycrystal.org>";
pmiddend = "Philipp Middendorf <pmidden@secure.mailbox.org>";
prikhi = "Pavan Rikhi <pavan.rikhi@gmail.com>";
psibi = "Sibi <sibi@psibi.in>";
pSub = "Pascal Wittmann <mail@pascal-wittmann.de>";
puffnfresh = "Brian McKenna <brian@brianmckenna.org>";
qknight = "Joachim Schiele <js@lastlog.de>";
@ -202,6 +218,7 @@
refnil = "Martin Lavoie <broemartino@gmail.com>";
relrod = "Ricky Elrod <ricky@elrod.me>";
renzo = "Renzo Carbonara <renzocarbonara@gmail.com>";
rick68 = "Wei-Ming Yang <rick68@gmail.com>";
rickynils = "Rickard Nilsson <rickynils@gmail.com>";
rob = "Rob Vermaas <rob.vermaas@gmail.com>";
robberer = "Longrin Wischnewski <robberer@freakmail.de>";
@ -229,6 +246,7 @@
sprock = "Roger Mason <rmason@mun.ca>";
spwhitt = "Spencer Whitt <sw@swhitt.me>";
stephenmw = "Stephen Weinberg <stephen@q5comm.com>";
szczyp = "Szczyp <qb@szczyp.com>";
sztupi = "Attila Sztupak <attila.sztupak@gmail.com>";
tailhook = "Paul Colomiets <paul@colomiets.name>";
taktoa = "Remy Goldschmidt <taktoa@gmail.com>";

View File

@ -55,7 +55,7 @@ rec {
};
};
closed = closeModules (modules ++ [ internalModule ]) (specialArgs // { inherit config options; lib = import ./.; });
closed = closeModules (modules ++ [ internalModule ]) ({ inherit config options; lib = import ./.; } // specialArgs);
# Note: the list of modules is reversed to maintain backward
# compatibility with the old module system. Not sure if this is
@ -76,8 +76,8 @@ rec {
else yieldConfig (prefix ++ [n]) v) set) ["_definedNames"];
in
if options._module.check.value && set ? _definedNames then
fold (m: res:
fold (name: res:
foldl' (res: m:
foldl' (res: name:
if set ? ${name} then res else throw "The option `${showOption (prefix ++ [name])}' defined in `${m.file}' does not exist.")
res m.names)
res set._definedNames
@ -182,18 +182,18 @@ rec {
let
loc = prefix ++ [name];
# Get all submodules that declare name.
decls = concatLists (map (m:
decls = concatMap (m:
if m.options ? ${name}
then [ { inherit (m) file; options = m.options.${name}; } ]
else []
) options);
) options;
# Get all submodules that define name.
defns = concatLists (map (m:
defns = concatMap (m:
if m.config ? ${name}
then map (config: { inherit (m) file; inherit config; })
(pushDownProperties m.config.${name})
else []
) configs);
) configs;
nrOptions = count (m: isOption m.options) decls;
# Extract the definitions for this loc
defns' = map (m: { inherit (m) file; value = m.config.${name}; })
@ -225,7 +225,7 @@ rec {
'opts' is a list of modules. Each module has an options attribute which
correspond to the definition of 'loc' in 'opt.file'. */
mergeOptionDecls = loc: opts:
fold (opt: res:
foldl' (res: opt:
if opt.options ? default && res ? default ||
opt.options ? example && res ? example ||
opt.options ? description && res ? description ||
@ -251,7 +251,7 @@ rec {
else if opt.options ? options then map (coerceOption opt.file) options' ++ res.options
else res.options;
in opt.options // res //
{ declarations = [opt.file] ++ res.declarations;
{ declarations = res.declarations ++ [opt.file];
options = submodules;
}
) { inherit loc; declarations = []; options = []; } opts;
@ -261,58 +261,67 @@ rec {
evalOptionValue = loc: opt: defs:
let
# Add in the default value for this option, if any.
defs' = (optional (opt ? default)
{ file = head opt.declarations; value = mkOptionDefault opt.default; }) ++ defs;
defs' =
(optional (opt ? default)
{ file = head opt.declarations; value = mkOptionDefault opt.default; }) ++ defs;
# Handle properties, check types, and merge everything together
inherit (mergeDefinitions loc opt.type defs') isDefined defsFinal mergedValue;
files = map (def: def.file) defsFinal;
merged =
if isDefined then mergedValue
else throw "The option `${showOption loc}' is used but not defined.";
# Handle properties, check types, and merge everything together.
res =
if opt.readOnly or false && length defs' > 1 then
throw "The option `${showOption loc}' is read-only, but it's set multiple times."
else
mergeDefinitions loc opt.type defs';
# Check whether the option is defined, and apply the apply
# function to the merged value. This allows options to yield a
# value computed from the definitions.
value =
if !res.isDefined then
throw "The option `${showOption loc}' is used but not defined."
else if opt ? apply then
opt.apply res.mergedValue
else
res.mergedValue;
# Finally, apply the apply function to the merged
# value. This allows options to yield a value computed
# from the definitions.
value = (opt.apply or id) merged;
in opt //
{ value = addErrorContext "while evaluating the option `${showOption loc}':" value;
definitions = map (def: def.value) defsFinal;
inherit isDefined files;
definitions = map (def: def.value) res.defsFinal;
files = map (def: def.file) res.defsFinal;
inherit (res) isDefined;
};
# Merge definitions of a value of a given type
mergeDefinitions = loc: type: defs: rec {
defsFinal =
let
# Process mkMerge and mkIf properties
processIfAndMerge = defs: concatMap (m:
map (value: { inherit (m) file; inherit value; }) (dischargeProperties m.value)
) defs;
# Merge definitions of a value of a given type.
mergeDefinitions = loc: type: defs: rec {
defsFinal =
let
# Process mkMerge and mkIf properties.
defs' = concatMap (m:
map (value: { inherit (m) file; inherit value; }) (dischargeProperties m.value)
) defs;
# Process mkOverride properties
processOverride = defs: filterOverrides defs;
# Process mkOverride properties.
defs'' = filterOverrides defs';
# Sort mkOrder properties
processOrder = defs:
# Avoid sorting if we don't have to.
if any (def: def.value._type or "" == "order") defs
then sortProperties defs
else defs;
in
processOrder (processOverride (processIfAndMerge defs));
# Sort mkOrder properties.
defs''' =
# Avoid sorting if we don't have to.
if any (def: def.value._type or "" == "order") defs''
then sortProperties defs''
else defs'';
in defs''';
# Type-check the remaining definitions, and merge them
mergedValue = fold (def: res:
if type.check def.value then res
else throw "The option value `${showOption loc}' in `${def.file}' is not a ${type.name}.")
(type.merge loc defsFinal) defsFinal;
# Type-check the remaining definitions, and merge them.
mergedValue = foldl' (res: def:
if type.check def.value then res
else throw "The option value `${showOption loc}' in `${def.file}' is not a ${type.name}.")
(type.merge loc defsFinal) defsFinal;
isDefined = defsFinal != [];
optionalValue =
if isDefined then { value = mergedValue; }
else {};
};
isDefined = defsFinal != [];
optionalValue =
if isDefined then { value = mergedValue; }
else {};
};
/* Given a config set, expand mkMerge properties, and push down the
other properties into the children. The result is a list of
@ -383,8 +392,7 @@ rec {
let
defaultPrio = 100;
getPrio = def: if def.value._type or "" == "override" then def.value.priority else defaultPrio;
min = x: y: if x < y then x else y;
highestPrio = fold (def: prio: min (getPrio def) prio) 9999 defs;
highestPrio = foldl' (prio: def: min (getPrio def) prio) 9999 defs;
strip = def: if def.value._type or "" == "override" then def // { value = def.value.content; } else def;
in concatMap (def: if getPrio def == highestPrio then [(strip def)] else []) defs;

View File

@ -4,7 +4,6 @@ let lib = import ./default.nix; in
with import ./trivial.nix;
with import ./lists.nix;
with import ./misc.nix;
with import ./attrsets.nix;
with import ./strings.nix;
@ -20,6 +19,7 @@ rec {
, apply ? null # Function that converts the option value to something else.
, internal ? null # Whether the option is for NixOS developers only.
, visible ? null # Whether the option shows up in the manual.
, readOnly ? null # Whether the option can be set only once
, options ? null # Obsolete, used by types.optionSet.
} @ attrs:
attrs // { _type = "option"; };
@ -53,8 +53,8 @@ rec {
if length list == 1 then head list
else if all isFunction list then x: mergeDefaultOption loc (map (f: f x) list)
else if all isList list then concatLists list
else if all isAttrs list then fold lib.mergeAttrs {} list
else if all isBool list then fold lib.or false list
else if all isAttrs list then foldl' lib.mergeAttrs {} list
else if all isBool list then foldl' lib.or false list
else if all isString list then lib.concatStrings list
else if all isInt list && all (x: x == head list) list then head list
else throw "Cannot merge definitions of `${showOption loc}' given in ${showFiles (getFiles defs)}.";
@ -68,7 +68,7 @@ rec {
/* "Merge" option definitions by checking that they all have the same value. */
mergeEqualOption = loc: defs:
if defs == [] then abort "This case should never happen."
else fold (def: val:
else foldl' (val: def:
if def.value != val then
throw "The option `${showOption loc}' has conflicting definitions, in ${showFiles (getFiles defs)}."
else
@ -83,7 +83,7 @@ rec {
optionAttrSetToDocList = optionAttrSetToDocList' [];
optionAttrSetToDocList' = prefix: options:
fold (opt: rest:
concatMap (opt:
let
docOption = rec {
name = showOption opt.loc;
@ -91,6 +91,7 @@ rec {
declarations = filter (x: x != unknownModule) opt.declarations;
internal = opt.internal or false;
visible = opt.visible or true;
readOnly = opt.readOnly or false;
type = opt.type.name or null;
}
// (if opt ? example then { example = scrubOptionValue opt.example; } else {})
@ -101,8 +102,7 @@ rec {
let ss = opt.type.getSubOptions opt.loc;
in if ss != {} then optionAttrSetToDocList' opt.loc ss else [];
in
# FIXME: expensive, O(n^2)
[ docOption ] ++ subOptions ++ rest) [] (collect isOption options);
[ docOption ] ++ subOptions) (collect isOption options);
/* This function recursively removes all derivation attributes from

View File

@ -8,11 +8,15 @@ in
rec {
inherit (builtins) stringLength substring head tail isString;
inherit (builtins) stringLength substring head tail isString replaceStrings;
# Concatenate a list of strings.
concatStrings = lib.fold (x: y: x + y) "";
concatStrings =
if builtins ? concatStringsSep then
builtins.concatStringsSep ""
else
lib.foldl' (x: y: x + y) "";
# Map a function over a list and concatenate the resulting strings.
@ -25,14 +29,13 @@ rec {
intersperse = separator: list:
if list == [] || length list == 1
then list
else [(head list) separator]
++ (intersperse separator (tail list));
else tail (lib.concatMap (x: [separator x]) list);
# Concatenate a list of strings with a separator between each element, e.g.
# concatStringsSep " " ["foo" "bar" "xyzzy"] == "foo bar xyzzy"
concatStringsSep = separator: list:
concatStrings (intersperse separator list);
concatStringsSep = builtins.concatStringsSep or (separator: list:
concatStrings (intersperse separator list));
concatMapStringsSep = sep: f: list: concatStringsSep sep (map f list);
concatImapStringsSep = sep: f: list: concatStringsSep sep (lib.imap f list);
@ -61,13 +64,13 @@ rec {
# Determine whether a string has given prefix/suffix.
hasPrefix = pref: str:
eqStrings (substring 0 (stringLength pref) str) pref;
substring 0 (stringLength pref) str == pref;
hasSuffix = suff: str:
let
lenStr = stringLength str;
lenSuff = stringLength suff;
in lenStr >= lenSuff &&
eqStrings (substring (lenStr - lenSuff) lenStr str) suff;
substring (lenStr - lenSuff) lenStr str == suff;
# Convert a string to a list of characters (i.e. singleton strings).
@ -76,36 +79,31 @@ rec {
# will likely be horribly inefficient; Nix is not a general purpose
# programming language. Complex string manipulations should, if
# appropriate, be done in a derivation.
stringToCharacters = s: let l = stringLength s; in
if l == 0
then []
else map (p: substring p 1 s) (lib.range 0 (l - 1));
stringToCharacters = s:
map (p: substring p 1 s) (lib.range 0 (stringLength s - 1));
# Manipulate a string charcater by character and replace them by strings
# before concatenating the results.
# Manipulate a string charactter by character and replace them by
# strings before concatenating the results.
stringAsChars = f: s:
concatStrings (
map f (stringToCharacters s)
);
# same as vim escape function.
# Each character contained in list is prefixed by "\"
escape = list : string :
stringAsChars (c: if lib.elem c list then "\\${c}" else c) string;
# Escape occurrence of the elements of list in string by
# prefixing it with a backslash. For example, escape ["(" ")"]
# "(foo)" returns the string \(foo\).
escape = list: replaceChars list (map (c: "\\${c}") list);
# still ugly slow. But more correct now
# [] for zsh
# Escape all characters that have special meaning in the Bourne shell.
escapeShellArg = lib.escape (stringToCharacters "\\ ';$`()|<>\t*[]");
# replace characters by their substitutes. This function is equivalent to
# the `tr' command except that one character can be replace by multiple
# ones. e.g.,
# replaceChars ["<" ">"] ["&lt;" "&gt;"] "<foo>" returns "&lt;foo&gt;".
replaceChars = del: new: s:
# Obsolete - use replaceStrings instead.
replaceChars = builtins.replaceStrings or (
del: new: s:
let
substList = lib.zipLists del new;
subst = c:
@ -115,26 +113,23 @@ rec {
else
found.snd;
in
stringAsChars subst s;
stringAsChars subst s);
# Case conversion utilities
# Case conversion utilities.
lowerChars = stringToCharacters "abcdefghijklmnopqrstuvwxyz";
upperChars = stringToCharacters "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
toLower = replaceChars upperChars lowerChars;
toUpper = replaceChars lowerChars upperChars;
# Appends string context from another string
# Appends string context from another string.
addContextFrom = a: b: substring 0 0 a + b;
# Compares strings not requiring context equality
# Obviously, a workaround but works on all Nix versions
eqStrings = a: b: addContextFrom b a == addContextFrom a b;
# Cut a string with a separator and produces a list of strings which were
# separated by this separator. e.g.,
# `splitString "." "foo.bar.baz"' returns ["foo" "bar" "baz"].
# Cut a string with a separator and produces a list of strings which
# were separated by this separator; e.g., `splitString "."
# "foo.bar.baz"' returns ["foo" "bar" "baz"].
splitString = _sep: _s:
let
sep = addContextFrom _s _sep;
@ -177,7 +172,7 @@ rec {
sufLen = stringLength suf;
sLen = stringLength s;
in
if sufLen <= sLen && eqStrings suf (substring (sLen - sufLen) sufLen s) then
if sufLen <= sLen && suf == substring (sLen - sufLen) sufLen s then
substring 0 (sLen - sufLen) s
else
s;
@ -196,21 +191,22 @@ rec {
# Extract name with version from URL. Ask for separator which is
# supposed to start extension
nameFromURL = url: sep: let
components = splitString "/" url;
filename = lib.last components;
name = builtins.head (splitString sep filename);
in
assert ! eqStrings name filename;
name;
# supposed to start extension.
nameFromURL = url: sep:
let
components = splitString "/" url;
filename = lib.last components;
name = builtins.head (splitString sep filename);
in assert name != filename; name;
# Create an --{enable,disable}-<feat> string that can be passed to
# standard GNU Autoconf scripts.
enableFeature = enable: feat: "--${if enable then "enable" else "disable"}-${feat}";
# Create a fixed width string with additional prefix to match required width
# Create a fixed width string with additional prefix to match
# required width.
fixedWidthString = width: filler: str:
let
strw = lib.stringLength str;
@ -219,6 +215,12 @@ rec {
assert strw <= width;
if strw == width then str else filler + fixedWidthString reqWidth filler str;
# Format a number adding leading zeroes up to fixed width
# Format a number adding leading zeroes up to fixed width.
fixedWidthNumber = width: n: fixedWidthString width "0" (toString n);
# Check whether a value is a store path.
isStorePath = x: builtins.substring 0 1 (toString x) == "/" && dirOf (builtins.toPath x) == builtins.storeDir;
}

View File

@ -22,7 +22,7 @@ rec {
inherit (builtins)
pathExists readFile isBool isFunction
isInt add sub lessThan
seq deepSeq;
seq deepSeq genericClosure;
# Return the Nixpkgs version number.
nixpkgsVersion =

View File

@ -88,20 +88,22 @@ rec {
attrs = mkOptionType {
name = "attribute set";
check = isAttrs;
merge = loc: fold (def: mergeAttrs def.value) {};
merge = loc: foldl' (res: def: mergeAttrs res def.value) {};
};
# derivation is a reserved keyword.
package = mkOptionType {
name = "derivation";
check = isDerivation;
merge = mergeOneOption;
check = x: isDerivation x || isStorePath x;
merge = loc: defs:
let res = mergeOneOption loc defs;
in if isDerivation res then res else toDerivation res;
};
path = mkOptionType {
name = "path";
# Hacky: there is no isPath primop.
check = x: builtins.unsafeDiscardStringContext (builtins.substring 0 1 (toString x)) == "/";
check = x: builtins.substring 0 1 (toString x) == "/";
merge = mergeOneOption;
};

View File

@ -11,7 +11,7 @@ uninstall packages from the command line. For instance, to install
Mozilla Thunderbird:
<screen>
$ nix-env -iA nixos.pkgs.thunderbird</screen>
$ nix-env -iA nixos.thunderbird</screen>
If you invoke this as root, the package is installed in the Nix
profile <filename>/nix/var/nix/profiles/default</filename> and visible

View File

@ -23,13 +23,13 @@ Nixpkgs will be built or downloaded as part of the system when you run
<para>You can get a list of the available packages as follows:
<screen>
$ nix-env -qaP '*' --description
nixos.pkgs.firefox firefox-23.0 Mozilla Firefox - the browser, reloaded
nixos.firefox firefox-23.0 Mozilla Firefox - the browser, reloaded
<replaceable>...</replaceable>
</screen>
The first column in the output is the <emphasis>attribute
name</emphasis>, such as
<literal>nixos.pkgs.thunderbird</literal>. (The
<literal>nixos.thunderbird</literal>. (The
<literal>nixos</literal> prefix allows distinguishing between
different channels that you might have.)</para>

View File

@ -61,6 +61,12 @@ by default because its not free software. You can enable it as follows:
<programlisting>
services.xserver.videoDrivers = [ "nvidia" ];
</programlisting>
Or if you have an older card, you may have to use one of the legacy drivers:
<programlisting>
services.xserver.videoDrivers = [ "nvidiaLegacy340" ];
services.xserver.videoDrivers = [ "nvidiaLegacy304" ];
services.xserver.videoDrivers = [ "nvidiaLegacy173" ];
</programlisting>
You may need to reboot after enabling this driver to prevent a clash
with other kernel modules.</para>

View File

@ -61,6 +61,16 @@ let
echo "${version}" > version
'';
toc = builtins.toFile "toc.xml"
''
<toc role="chunk-toc">
<d:tocentry xmlns:d="http://docbook.org/ns/docbook" linkend="book-nixos-manual"><?dbhtml filename="index.html"?>
<d:tocentry linkend="ch-options"><?dbhtml filename="options.html"?></d:tocentry>
<d:tocentry linkend="ch-release-notes"><?dbhtml filename="release-notes.html"?></d:tocentry>
</d:tocentry>
</toc>
'';
in rec {
# The NixOS options in JSON format.
@ -113,9 +123,10 @@ in rec {
--param chunk.section.depth 0 \
--param chunk.first.sections 1 \
--param use.id.as.filename 1 \
--stringparam generate.toc "book toc chapter toc appendix toc" \
--stringparam generate.toc "book toc appendix toc" \
--stringparam chunk.toc ${toc} \
--nonet --xinclude --output $dst/ \
${docbook5_xsl}/xml/xsl/docbook/xhtml/chunkfast.xsl ./manual.xml
${docbook5_xsl}/xml/xsl/docbook/xhtml/chunktoc.xsl ./manual.xml
mkdir -p $dst/images/callouts
cp ${docbook5_xsl}/xml/xsl/docbook/images/callouts/*.gif $dst/images/callouts/

View File

@ -106,6 +106,15 @@ options = {
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.package</varname></term>
<listitem>
<para>A derivation (such as <literal>pkgs.hello</literal>) or a
store path (such as
<filename>/nix/store/1ifi1cfbfs5iajmvwgrbmrnrw3a147h9-hello-2.10</filename>).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.listOf</varname> <replaceable>t</replaceable></term>
<listitem>
@ -138,4 +147,4 @@ You can also create new types using the function
<varname>mkOptionType</varname>. See
<filename>lib/types.nix</filename> in Nixpkgs for details.</para>
</section>
</section>

View File

@ -6,8 +6,8 @@
<title>Booting from a USB Drive</title>
<para>For systems without CD drive, the NixOS livecd can be booted from
a usb stick. For non-UEFI installations,
<para>For systems without CD drive, the NixOS live CD can be booted from
a USB stick. For non-UEFI installations,
<link xlink:href="http://unetbootin.sourceforge.net/">unetbootin</link>
will work. For UEFI installations, you should mount the ISO, copy its contents
verbatim to your drive, then either:

View File

@ -107,4 +107,30 @@ newer Nix version, which may involve an upgrade of Nixs database
schema. This cannot be undone easily, so in that case you will not be
able to go back to your original channel.</para></warning>
<section><title>Automatic Upgrades</title>
<para>You can keep a NixOS system up-to-date automatically by adding
the following to <filename>configuration.nix</filename>:
<programlisting>
system.autoUpgrade.enable = true;
</programlisting>
This enables a periodically executed systemd service named
<literal>nixos-upgrade.service</literal>. It runs
<command>nixos-rebuild switch --upgrade</command> to upgrade NixOS to
the latest version in the current channel. (To see when the service
runs, see <command>systemctl list-timers</command>.) You can also
specify a channel explicitly, e.g.
<programlisting>
system.autoUpgrade.channel = https://nixos.org/channels/nixos-15.09;
</programlisting>
</para>
</section>
</chapter>

View File

@ -2,7 +2,7 @@
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="NixOSManual">
xml:id="book-nixos-manual">
<info>
<title>NixOS Manual</title>
@ -33,11 +33,12 @@
<xi:include href="administration/running.xml" />
<!-- <xi:include href="userconfiguration.xml" /> -->
<xi:include href="development/development.xml" />
<xi:include href="release-notes/release-notes.xml" />
<appendix xml:id="ch-options">
<title>Configuration Options</title>
<xi:include href="options-db.xml" />
</appendix>
<xi:include href="release-notes/release-notes.xml" />
</book>

View File

@ -25,61 +25,65 @@
<option>
<xsl:value-of select="attr[@name = 'name']/string/@value" />
</option>
</term>
</term>
<listitem>
<listitem>
<para>
<xsl:value-of disable-output-escaping="yes"
select="attr[@name = 'description']/string/@value" />
</para>
<para>
<xsl:value-of disable-output-escaping="yes"
select="attr[@name = 'description']/string/@value" />
</para>
<xsl:if test="attr[@name = 'type']">
<para>
<emphasis>Type:</emphasis>
<xsl:text> </xsl:text>
<xsl:apply-templates select="attr[@name = 'type']" mode="top" />
</para>
</xsl:if>
<xsl:if test="attr[@name = 'type']">
<para>
<emphasis>Type:</emphasis>
<xsl:text> </xsl:text>
<xsl:value-of select="attr[@name = 'type']/string/@value"/>
<xsl:if test="attr[@name = 'readOnly']/bool/@value = 'true'">
<xsl:text> </xsl:text>
<emphasis>(read only)</emphasis>
</xsl:if>
</para>
</xsl:if>
<xsl:if test="attr[@name = 'default']">
<para>
<emphasis>Default:</emphasis>
<xsl:text> </xsl:text>
<xsl:apply-templates select="attr[@name = 'default']" mode="top" />
</para>
</xsl:if>
<xsl:if test="attr[@name = 'default']">
<para>
<emphasis>Default:</emphasis>
<xsl:text> </xsl:text>
<xsl:apply-templates select="attr[@name = 'default']" mode="top" />
</para>
</xsl:if>
<xsl:if test="attr[@name = 'example']">
<para>
<emphasis>Example:</emphasis>
<xsl:text> </xsl:text>
<xsl:choose>
<xsl:when test="attr[@name = 'example']/attrs[attr[@name = '_type' and string[@value = 'literalExample']]]">
<programlisting><xsl:value-of select="attr[@name = 'example']/attrs/attr[@name = 'text']/string/@value" /></programlisting>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="attr[@name = 'example']" mode="top" />
</xsl:otherwise>
</xsl:choose>
</para>
</xsl:if>
<xsl:if test="attr[@name = 'example']">
<para>
<emphasis>Example:</emphasis>
<xsl:text> </xsl:text>
<xsl:choose>
<xsl:when test="attr[@name = 'example']/attrs[attr[@name = '_type' and string[@value = 'literalExample']]]">
<programlisting><xsl:value-of select="attr[@name = 'example']/attrs/attr[@name = 'text']/string/@value" /></programlisting>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="attr[@name = 'example']" mode="top" />
</xsl:otherwise>
</xsl:choose>
</para>
</xsl:if>
<xsl:if test="count(attr[@name = 'declarations']/list/*) != 0">
<para>
<emphasis>Declared by:</emphasis>
</para>
<xsl:apply-templates select="attr[@name = 'declarations']" />
</xsl:if>
<xsl:if test="count(attr[@name = 'declarations']/list/*) != 0">
<para>
<emphasis>Declared by:</emphasis>
</para>
<xsl:apply-templates select="attr[@name = 'declarations']" />
</xsl:if>
<xsl:if test="count(attr[@name = 'definitions']/list/*) != 0">
<para>
<emphasis>Defined by:</emphasis>
</para>
<xsl:apply-templates select="attr[@name = 'definitions']" />
</xsl:if>
<xsl:if test="count(attr[@name = 'definitions']/list/*) != 0">
<para>
<emphasis>Defined by:</emphasis>
</para>
<xsl:apply-templates select="attr[@name = 'definitions']" />
</xsl:if>
</listitem>
</listitem>
</varlistentry>

View File

@ -1,19 +1,18 @@
<part xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="ch-release-notes">
<appendix xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="ch-release-notes">
<title>Release Notes</title>
<partintro>
<para>This section lists the release notes for each stable version of NixOS
and current unstable revision.</para>
</partintro>
<xi:include href="rl-unstable.xml" />
<xi:include href="rl-1509.xml" />
<xi:include href="rl-1412.xml" />
<xi:include href="rl-1404.xml" />
<xi:include href="rl-1310.xml" />
</part>
</appendix>

View File

@ -1,11 +1,11 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-13.10">
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-13.10">
<title>Release 13.10 (“Aardvark”, 2013/10/31)</title>
<para>This is the first stable release branch of NixOS.</para>
</chapter>
</section>

View File

@ -1,8 +1,8 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-14.04">
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-14.04">
<title>Release 14.04 (“Baboon”, 2014/04/30)</title>
@ -157,4 +157,4 @@ networking.firewall.enable = false;
</para>
</chapter>
</section>

View File

@ -1,8 +1,8 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-14.12">
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-14.12">
<title>Release 14.12 (“Caterpillar”, 2014/12/30)</title>
@ -174,4 +174,4 @@ now.</para></listitem>
</para>
</chapter>
</section>

View File

@ -0,0 +1,231 @@
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-15.09">
<title>Release 15.09 (“Dingo”, 2015/09/??)</title>
<para>In addition to numerous new and upgraded packages, this release has the following highlights:
<itemizedlist>
<listitem>
<para>
The Haskell packages infrastructure has been re-designed from the ground up.
NixOS now distributes the latest version of every single package registered on
<link xlink:href="http://hackage.haskell.org/">Hackage</link>, i.e. well over
8000 Haskell packages. Further information and usage instructions for the
improved infrastructure are available at <link
xlink:href="https://nixos.org/wiki/Haskell">https://nixos.org/wiki/Haskell</link>.
Users migrating from an earlier release will find also find helpful information
below, in the list of backwards-incompatible changes.
</para>
</listitem>
<listitem>
<para>
Users running an SSH server who worry about the quality of their
<literal>/etc/ssh/moduli</literal> file with respect to the <link
xlink:href="https://stribika.github.io/2015/01/04/secure-secure-shell.html">vulnerabilities
discovered in the Diffie-Hellman key exchange</link> can now replace OpenSSH's
default version with one they generated themselves using the new
<literal>services.openssh.moduliFile</literal> option.
</para>
</listitem>
</itemizedlist>
</para>
<para>When upgrading from a previous release, please be aware of the
following incompatible changes:
<itemizedlist>
<listitem><para><command>sshd</command> no longer supports DSA and ECDSA
host keys by default. If you have existing systems with such host keys
and want to continue to use them, please set
<programlisting>
system.stateVersion = "14.12";
</programlisting>
(The new option <option>system.stateVersion</option> ensures that
certain configuration changes that could break existing systems (such
as the <command>sshd</command> host key setting) will maintain
compatibility with the specified NixOS release.)</para></listitem>
<listitem><para><command>cron</command> is no longer enabled by
default, unless you have a non-empty
<option>services.cron.systemCronJobs</option>. To force
<command>cron</command> to be enabled, set
<option>services.cron.enable = true</option>.</para></listitem>
<listitem><para>Nix now requires binary caches to be cryptographically
signed. If you have unsigned binary caches that you want to continue
to use, you should set <option>nix.requireSignedBinaryCaches =
false</option>.</para></listitem>
<listitem><para>Steam now doesn't need root rights to work. Instead of using
<literal>*-steam-chrootenv</literal>, you should now just run <literal>steam</literal>.
<literal>steamChrootEnv</literal> package was renamed to <literal>steam</literal>,
and old <literal>steam</literal> package -- to <literal>steamOriginal</literal>.
</para></listitem>
<listitem><para>CMPlayer has been renamed to bomi upstream. Package <literal>cmplayer</literal>
was accordingly renamed to <literal>bomi</literal>
</para></listitem>
<listitem><para>Atom Shell has been renamed to Electron upstream. Package <literal>atom-shell</literal>
was accordingly renamed to <literal>electron</literal>
</para></listitem>
<listitem><para>Elm is not released on Hackage anymore. You should now use <literal>elmPackages.elm</literal>
which contains the latest Elm platform.</para></listitem>
<listitem>
<para>
The CUPS printing service has been updated to version <literal>2.0.2</literal>.
Furthermore its systemd service has been renamed to <literal>cups.service</literal>.
</para>
<para>
Local printers are no longer shared or advertised by default. This behavior
can be changed by enabling <literal>services.printing.defaultShared</literal>
or <literal>services.printing.browsing</literal> respectively.
</para>
</listitem>
<listitem>
<para>
The VirtualBox host and guest options have been moved/renamed more
consistently and less confusing to be now found in
<literal>virtualisation.virtualbox.host.*</literal> instead of
<literal>services.virtualboxHost.*</literal> and
<literal>virtualisation.virtualbox.guest.*</literal> instead of
<literal>services.virtualboxGuest.*</literal>.
</para>
</listitem>
<listitem>
<para>
Haskell packages can no longer be found by name, i.e. the commands
<literal>nix-env -qa cabal-install</literal> and <literal>nix-env -i
ghc</literal> will fail, even though we <emphasis>do</emphasis> ship
both <literal>cabal-install</literal> and <literal>ghc</literal>.
The reason for this inconvenience is the sheer size of the Haskell
package set: name-based lookups such as these would become much
slower than they are today if we'd add the entire Hackage database
into the top level attribute set. Instead, the list of Haskell
packages can be displayed by
</para>
<programlisting>
nix-env -f &quot;&lt;nixpkgs&gt;&quot; -qaP -A haskellPackages
</programlisting>
<para>
and packages can be installed with:
</para>
<programlisting>
nix-env -f &quot;&lt;nixpkgs&gt;&quot; -iA haskellPackages.cabal-install
</programlisting>
</listitem>
<listitem>
<para>
Previous versions of NixOS came with a feature called
<literal>ghc-wrapper</literal>, a small wrapper script that allows
GHC to transparently pick up on libraries installed in the user's
profile. This feature has been deprecated;
<literal>ghc-wrapper</literal> was removed from the distribution.
The proper way to register Haskell libraries with the compiler now
is the <literal>haskellPackages.ghcWithPackages</literal>
function.
<link xlink:href="https://nixos.org/wiki/Haskell">https://nixos.org/wiki/Haskell</link>
provides much information about this subject.
</para>
</listitem>
<listitem>
<para>
All Haskell builds that have been generated with version 1.x of
the <literal>cabal2nix</literal> utility are now invalid and need
to be re-generated with a current version of
<literal>cabal2nix</literal> to function. The most recent version
of this tool can be installed by running
<literal>nix-env -i cabal2nix</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>haskellPackages</literal> set in Nixpkgs used to have a
function attribute called <literal>extension</literal> that users
could override in their <literal>~/.nixpkgs/config.nix</literal>
files to configure additional attributes, etc. That function still
exists, but it's now called <literal>overrides</literal>.
</para>
</listitem>
<listitem>
<para>
The OpenBLAS library has been updated to version
<literal>0.2.14</literal>. Support for the
<literal>x86_64-darwin</literal> platform was added. Dynamic
architecture detection was enabled; OpenBLAS now selects
microarchitecture-optimized routines at runtime, so optimal
performance is achieved without the need to rebuild OpenBLAS
locally. OpenBLAS has replaced ATLAS in most packages which use an
optimized BLAS or LAPACK implementation.
</para>
</listitem>
<listitem>
<para>
The <literal>phpfpm</literal> is now using the default PHP version
(<literal>pkgs.php</literal>) instead of PHP 5.4 (<literal>pkgs.php54</literal>).
</para>
</listitem>
<listitem>
<para>
The <literal>locate</literal> service no longer indexes the Nix store
by default, preventing packages with potentially numerous versions from
cluttering the output. Indexing the store can be activated by setting
<literal>services.locate.includeStore = true</literal>.
</para>
</listitem>
<listitem>
<para>
The Nix expression search path (<envar>NIX_PATH</envar>) no longer
contains <filename>/etc/nixos/nixpkgs</filename> by default. You
can override <envar>NIX_PATH</envar> by setting
<option>nix.nixPath</option>.
</para>
</listitem>
</itemizedlist>
</para>
<para>The following new services were added since the last release:
<itemizedlist>
<listitem><para><literal>brltty</literal></para></listitem>
<listitem><para><literal>marathon</literal></para></listitem>
<listitem><para><literal>tvheadend</literal></para></listitem>
</itemizedlist>
</para>
<para>Other notable improvements:
<itemizedlist>
<listitem><para>The nixos and nixpkgs channels were unified,
so one <emphasis>can</emphasis> use <literal>nix-env -iA nixos.bash</literal>
instead of <literal>nix-env -iA nixos.pkgs.bash</literal>.
See <link xlink:href="https://github.com/NixOS/nixpkgs/commit/2cd7c1f198">the commit</link> for details.
</para></listitem>
</itemizedlist>
</para>
</section>

View File

@ -1,184 +1,27 @@
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-unstable">
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-unstable">
<title>Unstable revision</title>
<para>In addition to numerous new and upgraded packages, this release has the following highlights:
<itemizedlist>
<listitem>
<para>
The Haskell packages infrastructure has been re-designed from the ground up.
NixOS now distributes the latest version of every single package registered on
<link xlink:href="http://hackage.haskell.org/">Hackage</link>, i.e. well over
8000 Haskell packages. Further information and usage instructions for the
improved infrastructure are available at <link
xlink:href="https://nixos.org/wiki/Haskell">https://nixos.org/wiki/Haskell</link>.
Users migrating from an earlier release will find also find helpful information
below, in the list of backwards-incompatible changes.
</para>
</listitem>
<listitem>
<para>
Users running an SSH server who worry about the quality of their
<literal>/etc/ssh/moduli</literal> file with respect to the <link
xlink:href="https://stribika.github.io/2015/01/04/secure-secure-shell.html">vulnerabilities
discovered in the Diffie-Hellman key exchange</link> can now replace OpenSSH's
default version with one they generated themselves using the new
<literal>services.openssh.moduliFile</literal> option.
</para>
</listitem>
</itemizedlist>
</para>
<para>Following new services were added since the last release:
<itemizedlist>
<listitem><para><literal>brltty</literal></para></listitem>
<listitem><para><literal>marathon</literal></para></listitem>
<listitem><para><literal>Tvheadend</literal></para></listitem>
</itemizedlist>
</para>
<title>Unstable</title>
<para>When upgrading from a previous release, please be aware of the
following incompatible changes:
following incompatible changes:
<itemizedlist>
<listitem><para>Steam now doesn't need root rights to work. Instead of using
<literal>*-steam-chrootenv</literal>, you should now just run <literal>steam</literal>.
<literal>steamChrootEnv</literal> package was renamed to <literal>steam</literal>,
and old <literal>steam</literal> package -- to <literal>steamOriginal</literal>.
</para></listitem>
<listitem><para>CMPlayer has been renamed to bomi upstream. Package <literal>cmplayer</literal>
was accordingly renamed to <literal>bomi</literal>
</para></listitem>
<listitem><para>Atom Shell has been renamed to Electron upstream. Package <literal>atom-shell</literal>
was accordingly renamed to <literal>electron</literal>
</para></listitem>
<listitem>
<para>
The default <literal>NIX_PATH</literal> for NixOS now includes
<literal>/nix/var/nix/profiles/per-user/root/channels</literal>, so it's
easy to add custom channels.
</para>
<para>
Moreover, whenever a <command>nixos-rebuild &lt;action&gt;
--upgrade</command> is issued, every channel that includes a file
called <filename>.update-on-nixos-rebuild</filename> will be upgraded
alongside of the <literal>nixos</literal> channel.
</para>
</listitem>
<listitem>
<para>
The CUPS printing service has been updated to version <literal>2.0.2</literal>.
Furthermore its systemd service has been renamed to <literal>cups.service</literal>.
</para>
<para>
Local printers are no longer shared or advertised by default. This behavior
can be changed by enabling <literal>services.printing.defaultShared</literal>
or <literal>services.printing.browsing</literal> respectively.
</para>
</listitem>
<listitem>
<para>
HPLIP (printer, scanner, and fax drivers for HP devices) has
been updated to version <literal>3.15.4</literal>. This release
adds support for the <literal>arm6l-linux</literal> and
<literal>arm7l-linux</literal> platforms.
</para>
</listitem>
<listitem>
<para>
Haskell packages can no longer be found by name, i.e. the commands
<literal>nix-env -qa cabal-install</literal> and <literal>nix-env -i
ghc</literal> will fail, even though we <emphasis>do</emphasis> ship
both <literal>cabal-install</literal> and <literal>ghc</literal>.
The reason for this inconvenience is the sheer size of the Haskell
package set: name-based lookups such as these would become much
slower than they are today if we'd add the entire Hackage database
into the top level attribute set. Instead, the list of Haskell
packages can be displayed by
</para>
<programlisting>
nix-env -f &quot;&lt;nixpkgs&gt;&quot; -qaP -A haskellPackages
</programlisting>
<para>
and packages can be installed with:
</para>
<programlisting>
nix-env -f &quot;&lt;nixpkgs&gt;&quot; -iA haskellPackages.cabal-install
</programlisting>
</listitem>
<listitem>
<para>
Previous versions of NixOS come with a feature called
<literal>ghc-wrapper</literal>, a small wrapper script that allows
GHC to transparently pick up on libraries installed in the user's
profile. This feature has been deprecated;
<literal>ghc-wrapper</literal> was removed from the distribution.
The proper way to register Haskell libraries with the compiler now
is the <literal>haskellPackages.ghcWithPackages</literal>
function.
<link xlink:href="https://nixos.org/wiki/Haskell">https://nixos.org/wiki/Haskell</link>
provides much information about this subject.
</para>
</listitem>
<listitem>
<para>
All Haskell builds that have been generated with version 1.x of
the <literal>cabal2nix</literal> utility are now invalid and need
to be re-generated with a current version of
<literal>cabal2nix</literal> to function. The most recent version
of this tool can be installed by running
<literal>nix-env -i cabal2nix</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>haskellPackages</literal> set in Nixpkgs used to have a
function attribute called <literal>extension</literal> that users
could override in their <literal>~/.nixpkgs/config.nix</literal>
files to configure additional attributes, etc. That function still
exists, but it's now called <literal>overrides</literal>.
</para>
</listitem>
<listitem>
<para>
The OpenBLAS library has been updated to version
<literal>0.2.14</literal>. Support for the
<literal>x86_64-darwin</literal> platform was added. Dynamic
architecture detection was enabled; OpenBLAS now selects
microarchitecture-optimized routines at runtime, so optimal
performance is achieved without the need to rebuild OpenBLAS
locally. OpenBLAS has replaced ATLAS in most packages which use an
optimized BLAS or LAPACK implementation.
</para>
</listitem>
<listitem>
<para>
The <literal>phpfpm</literal> is now using the default PHP version
(<literal>pkgs.php</literal>) instead of PHP 5.4 (<literal>pkgs.php54</literal>).
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem><para>
<command>wmiiSnap</command> has been replaced with
<command>wmii_hg</command>, but
<command>services.xserver.windowManager.wmii.enable</command>
has been updated respectively so this only affects you if you
have explicitly installed <command>wmiiSnap</command>.
</para></listitem>
<listitem><para>
<command>wmiimenu</command> is removed, as it has been removed by
the developers upstream. Use <command>wimenu</command> from the
<command>wmii-hg</command> package.
</para></listitem>
</itemizedlist>
</para>
</chapter>
</section>

View File

@ -1,6 +1,6 @@
{ system, minimal ? false }:
let pkgs = import ./nixpkgs.nix { config = {}; inherit system; }; in
let pkgs = import ../.. { config = {}; inherit system; }; in
with pkgs.lib;
with import ../lib/qemu-flags.nix;
@ -41,22 +41,22 @@ rec {
machines = attrNames nodes;
machinesNumbered = zipTwoLists machines (range 1 254);
machinesNumbered = zipLists machines (range 1 254);
nodes_ = flip map machinesNumbered (m: nameValuePair m.first
nodes_ = flip map machinesNumbered (m: nameValuePair m.fst
[ ( { config, pkgs, nodes, ... }:
let
interfacesNumbered = zipTwoLists config.virtualisation.vlans (range 1 255);
interfaces = flip map interfacesNumbered ({ first, second }:
nameValuePair "eth${toString second}" { ip4 =
[ { address = "192.168.${toString first}.${toString m.second}";
interfacesNumbered = zipLists config.virtualisation.vlans (range 1 255);
interfaces = flip map interfacesNumbered ({ fst, snd }:
nameValuePair "eth${toString snd}" { ip4 =
[ { address = "192.168.${toString fst}.${toString m.snd}";
prefixLength = 24;
} ];
});
in
{ key = "ip-address";
config =
{ networking.hostName = m.first;
{ networking.hostName = m.fst;
networking.interfaces = listToAttrs interfaces;
@ -76,11 +76,11 @@ rec {
virtualisation.qemu.options =
flip map interfacesNumbered
({ first, second }: qemuNICFlags second first m.second);
({ fst, snd }: qemuNICFlags snd fst m.snd);
};
}
)
(getAttr m.first nodes)
(getAttr m.fst nodes)
] );
in listToAttrs nodes_;

View File

@ -1,6 +0,0 @@
{ system ? builtins.currentSystem }:
{ pkgs =
(import nixpkgs/default.nix { inherit system; })
// { recurseForDerivations = true; };
}

View File

@ -17,6 +17,8 @@
baseModules ? import ../modules/module-list.nix
, # !!! See comment about args in lib/modules.nix
extraArgs ? {}
, # !!! See comment about args in lib/modules.nix
specialArgs ? {}
, modules
, # !!! See comment about check in lib/modules.nix
check ? true
@ -47,16 +49,11 @@ in rec {
inherit prefix check;
modules = modules ++ extraModules ++ baseModules ++ [ pkgsModule ];
args = extraArgs;
specialArgs = { modulesPath = ../modules; };
specialArgs = { modulesPath = ../modules; } // specialArgs;
}) config options;
# These are the extra arguments passed to every module. In
# particular, Nixpkgs is passed through the "pkgs" argument.
# FIXME: we enable config.allowUnfree to make packages like
# nvidia-x11 available. This isn't a problem because if the user has
# nixpkgs.config.allowUnfree = false, then evaluation will fail on
# the 64-bit package anyway. However, it would be cleaner to respect
# nixpkgs.config here.
extraArgs = extraArgs_ // {
inherit modules baseModules;
};

View File

@ -8,9 +8,7 @@ pkgs.releaseTools.makeSourceTarball {
officialRelease = false; # FIXME: fix this in makeSourceTarball
inherit version versionSuffix;
buildInputs = [ pkgs.nixUnstable ];
expr = builtins.readFile ./channel-expr.nix;
buildInputs = [ pkgs.nix ];
distPhase = ''
rm -rf .git
@ -18,11 +16,9 @@ pkgs.releaseTools.makeSourceTarball {
echo -n ${nixpkgs.rev or nixpkgs.shortRev} > .git-revision
releaseName=nixos-$VERSION$VERSION_SUFFIX
mkdir -p $out/tarballs
mkdir ../$releaseName
cp -prd . ../$releaseName/nixpkgs
cp -prd . ../$releaseName
chmod -R u+w ../$releaseName
ln -s nixpkgs/nixos ../$releaseName/nixos
echo "$expr" > ../$releaseName/default.nix
ln -s . ../$releaseName/nixpkgs # hack to make <nixpkgs> work
NIX_STATE_DIR=$TMPDIR nix-env -f ../$releaseName/default.nix -qaP --meta --xml \* > /dev/null
cd ..
chmod -R u+w $releaseName

View File

@ -0,0 +1,88 @@
# Builds an ext4 image containing a populated /nix/store with the closure
# of store paths passed in the storePaths parameter. The generated image
# is sized to only fit its contents, with the expectation that a script
# resizes the filesystem at boot time.
{ pkgs
, storePaths
, volumeLabel
}:
pkgs.stdenv.mkDerivation {
name = "ext4-fs.img";
buildInputs = with pkgs; [e2fsprogs libfaketime perl];
# For obtaining the closure of `storePaths'.
exportReferencesGraph =
map (x: [("closure-" + baseNameOf x) x]) storePaths;
buildCommand =
''
# Add the closures of the top-level store objects.
storePaths=$(perl ${pkgs.pathsFromGraph} closure-*)
# Also include a manifest of the closures in a format suitable
# for nix-store --load-db.
printRegistration=1 perl ${pkgs.pathsFromGraph} closure-* > nix-path-registration
# Make a crude approximation of the size of the target image.
# If the script starts failing, increase the fudge factors here.
numInodes=$(find $storePaths | wc -l)
numDataBlocks=$(du -c -B 4096 --apparent-size $storePaths | awk '$2 == "total" { print int($1 * 1.03) }')
bytes=$((2 * 4096 * $numInodes + 4096 * $numDataBlocks))
echo "Creating an EXT4 image of $bytes bytes (numInodes=$numInodes, numDataBlocks=$numDataBlocks)"
truncate -s $bytes $out
faketime "1970-01-01 00:00:00" mkfs.ext4 -L ${volumeLabel} -U 44444444-4444-4444-8888-888888888888 $out
# Populate the image contents by piping a bunch of commands to the `debugfs` tool from e2fsprogs.
# For example, to copy /nix/store/abcd...efg-coreutils-8.23/bin/sleep:
# cd /nix/store/abcd...efg-coreutils-8.23/bin
# write /nix/store/abcd...efg-coreutils-8.23/bin/sleep sleep
# sif sleep mode 040555
# sif sleep gid 30000
# In particular, debugfs doesn't handle absolute target paths; you have to 'cd' in the virtual
# filesystem first. Likewise the intermediate directories must already exist (using `find`
# handles that for us). And when setting the file's permissions, the inode type flags (__S_IFDIR,
# __S_IFREG) need to be set as well.
(
echo write nix-path-registration nix-path-registration
echo mkdir nix
echo cd /nix
echo mkdir store
# XXX: This explodes in exciting ways if anything in /nix/store has a space in it.
find $storePaths -printf '%y %f %h %m\n'| while read -r type file dir perms; do
# echo "TYPE=$type DIR=$dir FILE=$file PERMS=$perms" >&2
echo "cd $dir"
case $type in
d)
echo "mkdir $file"
echo sif $file mode $((040000 | 0$perms)) # magic constant is __S_IFDIR
;;
f)
echo "write $dir/$file $file"
echo sif $file mode $((0100000 | 0$perms)) # magic constant is __S_IFREG
;;
l)
echo "symlink $file $(readlink "$dir/$file")"
;;
*)
echo "Unknown entry: $type $dir $file $perms" >&2
exit 1
;;
esac
echo sif $file gid 30000 # chgrp to nixbld
done
) | faketime "1970-01-01 00:00:00" debugfs -w $out -f /dev/stdin > errorlog 2>&1
# The debugfs tool doesn't terminate on error nor exit with a non-zero status. Check manually.
if egrep -q 'Could not allocate|File not found' errorlog; then
cat errorlog
echo "--- Failed to create EXT4 image of $bytes bytes (numInodes=$numInodes, numDataBlocks=$numDataBlocks) ---"
return 1
fi
'';
}

View File

@ -1,8 +0,0 @@
/* Terrible backward compatibility hack to get the path to Nixpkgs
from here. Usually, that's the relative path ../... However,
when using the NixOS channel, <nixos> resolves to a symlink to
nixpkgs/nixos, so ../.. doesn't resolve to the top-level Nixpkgs
directory but one above it. So check for that situation. */
if builtins.pathExists ../../.version then import ../..
else if builtins.pathExists ../../nixpkgs then import ../../nixpkgs
else abort "Can't find Nixpkgs, please set NIX_PATH=nixpkgs=/path/to/nixpkgs."

View File

@ -15,6 +15,8 @@ rec {
unpackPhase = "true";
preferLocalBuild = true;
installPhase =
''
mkdir -p $out/bin

View File

@ -1,59 +1,125 @@
{ configuration ? import ../lib/from-env.nix "NIXOS_CONFIG" <nixos-config>
# []: display all options
# [<option names>]: display the selected options
, displayOptions ? [
"hardware.pcmcia.enable"
"environment.systemPackages"
"boot.kernelModules"
"services.udev.packages"
"jobs"
"environment.etc"
"system.activationScripts"
]
# provide an option name, as a string literal.
, testOption ? null
# provide a list of option names, as string literals.
, testOptions ? [ ]
}:
# This file is used to generate a dot graph which contains all options and
# there dependencies to track problems and their sources.
# This file is made to be used as follow:
#
# $ nix-instantiate ./option-usage.nix --argstr testOption service.xserver.enable -A txtContent --eval
#
# or
#
# $ nix-build ./option-usage.nix --argstr testOption service.xserver.enable -A txt -o service.xserver.enable._txt
#
# otther target exists such as, `dotContent`, `dot`, and `pdf`. If you are
# looking for the option usage of multiple options, you can provide a list
# as argument.
#
# $ nix-build ./option-usage.nix --arg testOptions \
# '["boot.loader.gummiboot.enable" "boot.loader.gummiboot.timeout"]' \
# -A txt -o gummiboot.list
#
# Note, this script is slow as it has to evaluate all options of the system
# once per queried option.
#
# This nix expression works by doing a first evaluation, which evaluates the
# result of every option.
#
# Then, for each queried option, we evaluate the NixOS modules a second
# time, except that we replace the `config` argument of all the modules with
# the result of the original evaluation, except for the tested option which
# value is replaced by a `throw` statement which is caught by the `tryEval`
# evaluation of each option value.
#
# We then compare the result of the evluation of the original module, with
# the result of the second evaluation, and consider that the new failures are
# caused by our mutation of the `config` argument.
#
# Doing so returns all option results which are directly using the
# tested option result.
with import ../../lib;
let
evalFun = {
extraArgs ? {}
specialArgs ? {}
}: import ../lib/eval-config.nix {
modules = [ configuration ];
inherit extraArgs;
inherit specialArgs;
};
eval = evalFun {};
inherit (eval) pkgs;
reportNewFailures = old: new: with pkgs.lib;
excludedTestOptions = [
# We cannot evluate _module.args, as it is used during the computation
# of the modules list.
"_module.args"
# For some reasons which we yet have to investigate, some options cannot
# be replaced by a throw without cuasing a non-catchable failure.
"networking.bonds"
"networking.bridges"
"networking.interfaces"
"networking.macvlans"
"networking.sits"
"networking.vlans"
"services.openssh.startWhenNeeded"
];
# for some reasons which we yet have to investigate, some options are
# time-consuming to compute, thus we filter them out at the moment.
excludedOptions = [
"boot.systemd.services"
"systemd.services"
"environment.gnome3.packageSet"
"kde.extraPackages"
];
excludeOptions = list:
filter (opt: !(elem (showOption opt.loc) excludedOptions)) list;
reportNewFailures = old: new:
let
filterChanges =
filter ({fst, snd}:
!(fst.config.success -> snd.config.success)
!(fst.success -> snd.success)
);
keepNames =
map ({fst, snd}:
assert fst.name == snd.name; snd.name
/* assert fst.name == snd.name; */ snd.name
);
# Use tryEval (strict ...) to know if there is any failure while
# evaluating the option value.
#
# Note, the `strict` function is not strict enough, but using toXML
# builtins multiply by 4 the memory usage and the time used to compute
# each options.
tryCollectOptions = moduleResult:
flip map (excludeOptions (collect isOption moduleResult)) (opt:
{ name = showOption opt.loc; } // builtins.tryEval (strict opt.value));
in
keepNames (
filterChanges (
zipLists (collect isOption old) (collect isOption new)
zipLists (tryCollectOptions old) (tryCollectOptions new)
)
);
# Create a list of modules where each module contains only one failling
# options.
introspectionModules = with pkgs.lib;
introspectionModules =
let
setIntrospection = opt: rec {
name = opt.name;
path = splitString "." opt.name;
name = showOption opt.loc;
path = opt.loc;
config = setAttrByPath path
(throw "Usage introspection of '${name}' by forced failure.");
};
@ -61,39 +127,67 @@ let
map setIntrospection (collect isOption eval.options);
overrideConfig = thrower:
pkgs.lib.recursiveUpdateUntil (path: old: new:
recursiveUpdateUntil (path: old: new:
path == thrower.path
) eval.config thrower.config;
graph = with pkgs.lib;
graph =
map (thrower: {
option = thrower.name;
usedBy = reportNewFailures eval.options (evalFun {
extraArgs = {
config = overrideConfig thrower;
};
}).options;
usedBy = assert __trace "Investigate ${thrower.name}" true;
reportNewFailures eval.options (evalFun {
specialArgs = {
config = overrideConfig thrower;
};
}).options;
}) introspectionModules;
graphToDot = graph: with pkgs.lib; ''
displayOptionsGraph =
let
checkList =
if !(isNull testOption) then [ testOption ]
else testOptions;
checkAll = checkList == [];
in
flip filter graph ({option, usedBy}:
(checkAll || elem option checkList)
&& !(elem option excludedTestOptions)
);
graphToDot = graph: ''
digraph "Option Usages" {
${concatMapStrings ({option, usedBy}:
assert __trace option true;
if displayOptions == [] || elem option displayOptions then
concatMapStrings (user: ''
"${option}" -> "${user}"''
) usedBy
else ""
) graph}
concatMapStrings (user: ''
"${option}" -> "${user}"''
) usedBy
) displayOptionsGraph}
}
'';
graphToText = graph:
concatMapStrings ({option, usedBy}:
concatMapStrings (user: ''
${user}
'') usedBy
) displayOptionsGraph;
in
pkgs.texFunctions.dot2pdf {
dotGraph = pkgs.writeTextFile {
rec {
dotContent = graphToDot graph;
dot = pkgs.writeTextFile {
name = "option_usages.dot";
text = graphToDot graph;
text = dotContent;
};
pdf = pkgs.texFunctions.dot2pdf {
dotGraph = dot;
};
txtContent = graphToText graph;
txt = pkgs.writeTextFile {
name = "option_usages.txt";
text = txtContent;
};
}

View File

@ -142,7 +142,7 @@ with lib;
config =
let fontconfig = config.fonts.fontconfig;
fcBool = x: "<bool>" + (if x then "true" else "false") + "</bool>";
nixosConf = ''
renderConf = ''
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
@ -169,6 +169,21 @@ with lib;
</edit>
</match>
${optionalString (fontconfig.dpi != 0) ''
<match target="pattern">
<edit name="dpi" mode="assign">
<double>${toString fontconfig.dpi}</double>
</edit>
</match>
''}
</fontconfig>
'';
genericAliasConf = ''
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
<!-- Default fonts -->
${optionalString (fontconfig.defaultFonts.sansSerif != []) ''
<alias>
@ -201,14 +216,6 @@ with lib;
</alias>
''}
${optionalString (fontconfig.dpi != 0) ''
<match target="pattern">
<edit name="dpi" mode="assign">
<double>${toString fontconfig.dpi}</double>
</edit>
</match>
''}
</fontconfig>
'';
in mkIf fontconfig.enable {
@ -219,7 +226,8 @@ with lib;
environment.etc."fonts/fonts.conf".source =
pkgs.makeFontsConf { fontconfig = pkgs.fontconfig_210; fontDirectories = config.fonts.fonts; };
environment.etc."fonts/conf.d/98-nixos.conf".text = nixosConf;
environment.etc."fonts/conf.d/10-nixos-rendering.conf".text = renderConf;
environment.etc."fonts/conf.d/60-nixos-generic-alias.conf".text = genericAliasConf;
# Versioned fontconfig > 2.10. Take shared fonts.conf from fontconfig.
# Otherwise specify only font directories.
@ -236,7 +244,8 @@ with lib;
</fontconfig>
'';
environment.etc."fonts/${pkgs.fontconfig.configVersion}/conf.d/98-nixos.conf".text = nixosConf;
environment.etc."fonts/${pkgs.fontconfig.configVersion}/conf.d/10-nixos-rendering.conf".text = renderConf;
environment.etc."fonts/${pkgs.fontconfig.configVersion}/conf.d/60-nixos-generic-alias.conf".text = genericAliasConf;
environment.etc."fonts/${pkgs.fontconfig.configVersion}/conf.d/99-user.conf" = {
enable = fontconfig.includeUserConf;

View File

@ -45,6 +45,7 @@ let
pkgs.strace
pkgs.su
pkgs.time
pkgs.texinfoInteractive
pkgs.utillinux
extraManpages
];
@ -57,7 +58,7 @@ in
environment = {
systemPackages = mkOption {
type = types.listOf types.path;
type = types.listOf types.package;
default = [];
example = literalExample "[ pkgs.firefox pkgs.thunderbird ]";
description = ''
@ -105,12 +106,14 @@ in
"/lib"
"/man"
"/sbin"
"/share/doc"
"/share/emacs"
"/share/vim-plugins"
"/share/org"
"/share/info"
"/share/terminfo"
"/share/man"
"/share/nano"
"/share/org"
"/share/terminfo"
"/share/vim-plugins"
];
system.path = pkgs.buildEnv {
@ -136,6 +139,13 @@ in
if [ -x $out/bin/update-desktop-database -a -w $out/share/applications ]; then
$out/bin/update-desktop-database $out/share/applications
fi
if [ -x $out/bin/install-info -a -w $out/share/info ]; then
shopt -s nullglob
for i in $out/share/info/*.info $out/share/info/*.info.gz; do
$out/bin/install-info $i $out/share/info/dir
done
fi
'';
};

View File

@ -26,6 +26,7 @@ in
hardwareClockInLocalTime = mkOption {
default = false;
type = types.bool;
description = "If set, keep the hardware clock in local time instead of UTC.";
};

View File

@ -216,7 +216,7 @@ let
exist. If <option>users.mutableUsers</option> is true, the
password can be changed subsequently using the
<command>passwd</command> command. Otherwise, it's
equivalent to setting the <option>password</option> option.
equivalent to setting the <option>hashedPassword</option> option.
${hashedPasswordDescription}
'';
@ -336,13 +336,13 @@ let
map (range: "${user.name}:${toString range.startUid}:${toString range.count}\n")
user.subUidRanges);
subuidFile = concatStrings (map mkSubuidEntry (attrValues cfg.extraUsers));
subuidFile = concatStrings (map mkSubuidEntry (attrValues cfg.users));
mkSubgidEntry = user: concatStrings (
map (range: "${user.name}:${toString range.startGid}:${toString range.count}\n")
user.subGidRanges);
subgidFile = concatStrings (map mkSubgidEntry (attrValues cfg.extraUsers));
subgidFile = concatStrings (map mkSubgidEntry (attrValues cfg.users));
idsAreUnique = set: idAttr: !(fold (name: args@{ dup, acc }:
let
@ -354,8 +354,8 @@ let
else { dup = false; acc = newAcc; }
) { dup = false; acc = {}; } (builtins.attrNames set)).dup;
uidsAreUnique = idsAreUnique (filterAttrs (n: u: u.uid != null) cfg.extraUsers) "uid";
gidsAreUnique = idsAreUnique (filterAttrs (n: g: g.gid != null) cfg.extraGroups) "gid";
uidsAreUnique = idsAreUnique (filterAttrs (n: u: u.uid != null) cfg.users) "uid";
gidsAreUnique = idsAreUnique (filterAttrs (n: g: g.gid != null) cfg.groups) "gid";
spec = pkgs.writeText "users-groups.json" (builtins.toJSON {
inherit (cfg) mutableUsers;
@ -364,13 +364,13 @@ let
name uid group description home shell createHome isSystemUser
password passwordFile hashedPassword
initialPassword initialHashedPassword;
}) cfg.extraUsers;
}) cfg.users;
groups = mapAttrsToList (n: g:
{ inherit (g) name gid;
members = g.members ++ (mapAttrsToList (n: u: u.name) (
filterAttrs (n: u: elem g.name u.extraGroups) cfg.extraUsers
filterAttrs (n: u: elem g.name u.extraGroups) cfg.users
));
}) cfg.extraGroups;
}) cfg.groups;
});
in {
@ -388,10 +388,10 @@ in {
<literal>groupadd</literal> commands. On system activation, the
existing contents of the <literal>/etc/passwd</literal> and
<literal>/etc/group</literal> files will be merged with the
contents generated from the <literal>users.extraUsers</literal> and
<literal>users.extraGroups</literal> options.
contents generated from the <literal>users.users</literal> and
<literal>users.groups</literal> options.
The initial password for a user will be set
according to <literal>users.extraUsers</literal>, but existing passwords
according to <literal>users.users</literal>, but existing passwords
will not be changed.
<warning><para>
@ -399,7 +399,7 @@ in {
group files will simply be replaced on system activation. This also
holds for the user passwords; all changed
passwords will be reset according to the
<literal>users.extraUsers</literal> configuration on activation.
<literal>users.users</literal> configuration on activation.
</para></warning>
'';
};
@ -412,7 +412,7 @@ in {
'';
};
users.extraUsers = mkOption {
users.users = mkOption {
default = {};
type = types.loaOf types.optionSet;
example = {
@ -433,7 +433,7 @@ in {
options = [ userOpts ];
};
users.extraGroups = mkOption {
users.groups = mkOption {
default = {};
example =
{ students.gid = 1001;
@ -461,7 +461,7 @@ in {
config = {
users.extraUsers = {
users.users = {
root = {
uid = ids.uids.root;
description = "System administrator";
@ -478,7 +478,7 @@ in {
};
};
users.extraGroups = {
users.groups = {
root.gid = ids.gids.root;
wheel.gid = ids.gids.wheel;
disk.gid = ids.gids.disk;
@ -525,6 +525,27 @@ in {
{ assertion = !cfg.enforceIdUniqueness || (uidsAreUnique && gidsAreUnique);
message = "UIDs and GIDs must be unique!";
}
{ # If mutableUsers is false, to prevent users creating a
# configuration that locks them out of the system, ensure that
# there is at least one "privileged" account that has a
# password or an SSH authorized key. Privileged accounts are
# root and users in the wheel group.
assertion = !cfg.mutableUsers ->
any id (mapAttrsToList (name: cfg:
(name == "root"
|| cfg.group == "wheel"
|| elem "wheel" cfg.extraGroups)
&&
((cfg.hashedPassword != null && cfg.hashedPassword != "!")
|| cfg.password != null
|| cfg.passwordFile != null
|| cfg.openssh.authorizedKeys.keys != []
|| cfg.openssh.authorizedKeys.keyFiles != [])
) cfg.users);
message = ''
Neither the root account nor any wheel user has a password or SSH authorized key.
You must set one to prevent being locked out of your system.'';
}
];
};

View File

@ -22,9 +22,7 @@ with lib;
###### implementation
config = mkIf config.hardware.enableAllFirmware {
hardware.firmware = [
"${pkgs.firmwareLinuxNonfree}/lib/firmware"
];
hardware.firmware = [ pkgs.firmwareLinuxNonfree ];
};
}

View File

@ -52,9 +52,9 @@ in
systemd.services.bumblebeed = {
description = "Bumblebee Hybrid Graphics Switcher";
wantedBy = [ "display-manager.service" ];
script = "bumblebeed --use-syslog -g ${config.hardware.bumblebee.group}";
path = [ kernel.bbswitch bumblebee ];
serviceConfig = {
ExecStart = "${bumblebee}/bin/bumblebeed --use-syslog -g ${config.hardware.bumblebee.group}";
Restart = "always";
RestartSec = 60;
CPUSchedulingPolicy = "idle";

View File

@ -5,11 +5,11 @@ let
in
{
boot.extraModulePackages = [wis_go7007];
boot.extraModulePackages = [ wis_go7007 ];
environment.systemPackages = [wis_go7007];
environment.systemPackages = [ wis_go7007 ];
hardware.firmware = ["${wis_go7007}/firmware"];
hardware.firmware = [ wis_go7007 ];
services.udev.packages = [wis_go7007];
services.udev.packages = [ wis_go7007 ];
}

View File

@ -9,18 +9,17 @@ let
# We need a copy of the Nix expressions for Nixpkgs and NixOS on the
# CD. These are installed into the "nixos" channel of the root
# user, as expected by nixos-rebuild/nixos-install.
# user, as expected by nixos-rebuild/nixos-install. FIXME: merge
# with make-channel.nix.
channelSources = pkgs.runCommand "nixos-${config.system.nixosVersion}"
{ expr = readFile ../../../lib/channel-expr.nix; }
{ }
''
mkdir -p $out/nixos
cp -prd ${pkgs.path} $out/nixos/nixpkgs
ln -s nixpkgs/nixos $out/nixos/nixos
mkdir -p $out
cp -prd ${pkgs.path} $out/nixos
chmod -R u+w $out/nixos
rm -rf $out/nixos/nixpkgs/.git
echo -n ${config.system.nixosVersion} > $out/nixos/nixpkgs/.version
echo -n "" > $out/nixos/nixpkgs/.version-suffix
echo "$expr" > $out/nixos/default.nix
ln -s . $out/nixos/nixpkgs
rm -rf $out/nixos/.git
echo -n ${config.system.nixosVersionSuffix} > $out/nixos/.version-suffix
'';
in

View File

@ -30,8 +30,7 @@ let
# * COM32 entries (chainload, reboot, poweroff) are not recognized. They
# result in incorrect boot entries.
baseIsolinuxCfg =
''
baseIsolinuxCfg = ''
SERIAL 0 38400
TIMEOUT ${builtins.toString syslinuxTimeout}
UI vesamenu.c32
@ -44,7 +43,7 @@ let
LINUX /boot/bzImage
APPEND init=${config.system.build.toplevel}/init ${toString config.boot.kernelParams}
INITRD /boot/initrd
'';
'';
isolinuxMemtest86Entry = ''
LABEL memtest
@ -55,12 +54,12 @@ let
isolinuxCfg = baseIsolinuxCfg + (optionalString config.boot.loader.grub.memtest86.enable isolinuxMemtest86Entry);
# The efi boot image
# The EFI boot image.
efiDir = pkgs.runCommand "efi-directory" {} ''
mkdir -p $out/EFI/boot
cp -v ${pkgs.gummiboot}/lib/gummiboot/gummiboot${targetArch}.efi $out/EFI/boot/boot${targetArch}.efi
mkdir -p $out/loader/entries
echo "title NixOS LiveCD" > $out/loader/entries/nixos-livecd.conf
echo "title NixOS Live CD" > $out/loader/entries/nixos-livecd.conf
echo "linux /boot/bzImage" >> $out/loader/entries/nixos-livecd.conf
echo "initrd /boot/initrd" >> $out/loader/entries/nixos-livecd.conf
echo "options init=${config.system.build.toplevel}/init ${toString config.boot.kernelParams}" >> $out/loader/entries/nixos-livecd.conf
@ -218,6 +217,8 @@ in
system.boot.loader.kernelFile = "bzImage";
environment.systemPackages = [ pkgs.grub2 pkgs.grub2_efi pkgs.syslinux ];
boot.consoleLogLevel = mkDefault 7;
# In stage 1 of the boot, mount the CD as the root FS by label so
# that we don't need to know its device. We pass the label of the
# root filesystem on the kernel command line, rather than in
@ -229,6 +230,7 @@ in
boot.kernelParams =
[ "root=LABEL=${config.isoImage.volumeID}"
"boot.shell_on_fail"
"nomodeset"
];
fileSystems."/" =
@ -268,6 +270,8 @@ in
boot.initrd.availableKernelModules = [ "squashfs" "iso9660" "usb-storage" ];
boot.blacklistedKernelModules = [ "nouveau" ];
boot.initrd.kernelModules = [ "loop" ];
# Closures to be copied to the Nix store on the CD, namely the init

View File

@ -0,0 +1,40 @@
{ config, lib, pkgs, ... }:
let
extlinux-conf-builder =
import ../../system/boot/loader/generic-extlinux-compatible/extlinux-conf-builder.nix {
inherit pkgs;
};
in
{
imports = [
../../profiles/minimal.nix
../../profiles/installation-device.nix
./sd-image.nix
];
assertions = lib.singleton {
assertion = pkgs.stdenv.system == "armv7l-linux";
message = "sd-image-armv7l-multiplatform.nix can be only built natively on ARMv7; " +
"it cannot be cross compiled";
};
boot.loader.grub.enable = false;
boot.loader.generic-extlinux-compatible.enable = true;
# FIXME: change this to linuxPackages_latest once v4.2 is out
boot.kernelPackages = pkgs.linuxPackages_testing;
boot.kernelParams = ["console=ttyS0,115200n8" "console=ttyAMA0,115200n8" "console=tty0"];
# FIXME: fix manual evaluation on ARM
services.nixosManual.enable = lib.mkOverride 0 false;
# FIXME: this probably should be in installation-device.nix
users.extraUsers.root.initialHashedPassword = "";
sdImage = {
populateBootCommands = ''
${extlinux-conf-builder} -t 3 -c ${config.system.build.toplevel} -d ./boot
'';
};
}

View File

@ -0,0 +1,46 @@
{ config, lib, pkgs, ... }:
let
extlinux-conf-builder =
import ../../system/boot/loader/generic-extlinux-compatible/extlinux-conf-builder.nix {
inherit pkgs;
};
in
{
imports = [
../../profiles/minimal.nix
../../profiles/installation-device.nix
./sd-image.nix
];
assertions = lib.singleton {
assertion = pkgs.stdenv.system == "armv6l-linux";
message = "sd-image-raspberrypi.nix can be only built natively on ARMv6; " +
"it cannot be cross compiled";
};
# Needed by RPi firmware
nixpkgs.config.allowUnfree = true;
boot.loader.grub.enable = false;
boot.loader.generic-extlinux-compatible.enable = true;
boot.kernelPackages = pkgs.linuxPackages_rpi;
# FIXME: fix manual evaluation on ARM
services.nixosManual.enable = lib.mkOverride 0 false;
# FIXME: this probably should be in installation-device.nix
users.extraUsers.root.initialHashedPassword = "";
sdImage = {
populateBootCommands = ''
for f in bootcode.bin fixup.dat start.elf; do
cp ${pkgs.raspberrypifw}/share/raspberrypi/boot/$f boot/
done
cp ${pkgs.ubootRaspberryPi}/u-boot.bin boot/u-boot-rpi.bin
echo 'kernel u-boot-rpi.bin' > boot/config.txt
${extlinux-conf-builder} -t 3 -c ${config.system.build.toplevel} -d ./boot
'';
};
}

View File

@ -0,0 +1,127 @@
# This module creates a bootable SD card image containing the given NixOS
# configuration. The generated image is MBR partitioned, with a FAT /boot
# partition, and ext4 root partition. The generated image is sized to fit
# its contents, and a boot script automatically resizes the root partition
# to fit the device on the first boot.
#
# The derivation for the SD image will be placed in
# config.system.build.sdImage
{ config, lib, pkgs, ... }:
with lib;
let
rootfsImage = import ../../../lib/make-ext4-fs.nix {
inherit pkgs;
inherit (config.sdImage) storePaths;
volumeLabel = "NIXOS_SD";
};
in
{
options.sdImage = {
storePaths = mkOption {
type = with types; listOf package;
example = literalExample "[ pkgs.stdenv ]";
description = ''
Derivations to be included in the Nix store in the generated SD image.
'';
};
bootSize = mkOption {
type = types.int;
default = 128;
description = ''
Size of the /boot partition, in megabytes.
'';
};
populateBootCommands = mkOption {
example = literalExample "'' cp \${pkgs.myBootLoader}/u-boot.bin boot/ ''";
description = ''
Shell commands to populate the ./boot directory.
All files in that directory are copied to the
/boot partition on the SD image.
'';
};
};
config = {
fileSystems = {
"/boot" = {
device = "/dev/disk/by-label/NIXOS_BOOT";
fsType = "vfat";
};
"/" = {
device = "/dev/disk/by-label/NIXOS_SD";
fsType = "ext4";
};
};
sdImage.storePaths = [ config.system.build.toplevel ];
system.build.sdImage = pkgs.stdenv.mkDerivation {
name = "sd-image-${pkgs.stdenv.system}.img";
buildInputs = with pkgs; [ dosfstools e2fsprogs mtools libfaketime utillinux ];
buildCommand = ''
# Create the image file sized to fit /boot and /, plus 4M of slack
rootSizeBlocks=$(du -B 512 --apparent-size ${rootfsImage} | awk '{ print $1 }')
bootSizeBlocks=$((${toString config.sdImage.bootSize} * 1024 * 1024 / 512))
imageSize=$((rootSizeBlocks * 512 + bootSizeBlocks * 512 + 4096 * 1024))
truncate -s $imageSize $out
# type=b is 'W95 FAT32', type=83 is 'Linux'.
sfdisk $out <<EOF
label: dos
label-id: 0x2178694e
start=1M, size=$bootSizeBlocks, type=b, bootable
type=83
EOF
# Copy the rootfs into the SD image
eval $(partx $out -o START,SECTORS --nr 2 --pairs)
dd conv=notrunc if=${rootfsImage} of=$out seek=$START count=$SECTORS
# Create a FAT32 /boot partition of suitable size into bootpart.img
eval $(partx $out -o START,SECTORS --nr 1 --pairs)
truncate -s $((SECTORS * 512)) bootpart.img
faketime "1970-01-01 00:00:00" mkfs.vfat -i 0x2178694e -n NIXOS_BOOT bootpart.img
# Populate the files intended for /boot
mkdir boot
${config.sdImage.populateBootCommands}
# Copy the populated /boot into the SD image
(cd boot; mcopy -bpsvm -i ../bootpart.img ./* ::)
dd conv=notrunc if=bootpart.img of=$out seek=$START count=$SECTORS
'';
};
boot.postBootCommands = ''
# On the first boot do some maintenance tasks
if [ -f /nix-path-registration ]; then
# Figure out device names for the boot device and root filesystem.
rootPart=$(readlink -f /dev/disk/by-label/NIXOS_SD)
bootDevice=$(lsblk -npo PKNAME $rootPart)
# Resize the root partition and the filesystem to fit the disk
echo ",+," | sfdisk -N2 --no-reread $bootDevice
${pkgs.parted}/bin/partprobe
${pkgs.e2fsprogs}/bin/resize2fs $rootPart
# Register the contents of the initial Nix store
${config.nix.package}/bin/nix-store --load-db < /nix-path-registration
# nixos-rebuild also requires a "system" profile and an /etc/NIXOS tag.
touch /etc/NIXOS
${config.nix.package}/bin/nix-env -p /nix/var/nix/profiles/system --set /run/current-system
# Prevents this from running on later boots.
rm -f /nix-path-registration
fi
'';
};
}

View File

@ -0,0 +1,81 @@
{ config, lib, pkgs, ... }:
with lib;
let cfg = config.system.autoUpgrade; in
{
options = {
system.autoUpgrade = {
enable = mkOption {
type = types.bool;
default = false;
description = ''
Whether to periodically upgrade NixOS to the latest
version. If enabled, a systemd timer will run
<literal>nixos-rebuild switch --upgrade</literal> once a
day.
'';
};
channel = mkOption {
type = types.nullOr types.str;
default = null;
example = https://nixos.org/channels/nixos-14.12-small;
description = ''
The URI of the NixOS channel to use for automatic
upgrades. By default, this is the channel set using
<command>nix-channel</command> (run <literal>nix-channel
--list</literal> to see the current value).
'';
};
flags = mkOption {
type = types.listOf types.str;
default = [];
example = [ "-I" "stuff=/home/alice/nixos-stuff" "--option" "extra-binary-caches" "http://my-cache.example.org/" ];
description = ''
Any additional flags passed to <command>nixos-rebuild</command>.
'';
};
};
};
config = {
system.autoUpgrade.flags =
[ "--no-build-output" ]
++ (if cfg.channel == null
then [ "--upgrade" ]
else [ "-I" "nixpkgs=${cfg.channel}/nixexprs.tar.xz" ]);
systemd.services.nixos-upgrade = {
description = "NixOS Upgrade";
restartIfChanged = false;
unitConfig.X-StopOnRemoval = false;
serviceConfig.Type = "oneshot";
environment = config.nix.envVars //
{ inherit (config.environment.sessionVariables) NIX_PATH SSL_CERT_FILE;
HOME = "/root";
};
path = [ pkgs.gnutar pkgs.xz config.nix.package ];
script = ''
${config.system.build.nixos-rebuild}/bin/nixos-rebuild test ${toString cfg.flags}
'';
startAt = mkIf cfg.enable "04:40";
};
};
}

View File

@ -53,5 +53,5 @@ fi
# Build a network of VMs
nix-build '<nixos/modules/installer/tools/nixos-build-vms/build-vms.nix>' \
nix-build '<nixpkgs/nixos/modules/installer/tools/nixos-build-vms/build-vms.nix>' \
--argstr networkExpr $networkExpr $noOutLinkArg $showTraceArg

View File

@ -27,7 +27,7 @@ let
if [ -z "$(type -P git)" ]; then
echo "installing Git..."
nix-env -iA nixos.pkgs.git || nix-env -i git
nix-env -iA nixos.git
fi
# Move any old nixpkgs directories out of the way.

View File

@ -235,7 +235,7 @@ chomp $virt;
# Check if we're a VirtualBox guest. If so, enable the guest
# additions.
if ($virt eq "oracle") {
push @attrs, "services.virtualboxGuest.enable = true;"
push @attrs, "virtualisation.virtualbox.guest.enable = true;"
}
@ -544,6 +544,9 @@ $bootLoaderConfig
# uid = 1000;
# };
# The NixOS release to be compatible with for stateful data such as databases.
system.stateVersion = "@nixosRelease@";
}
EOF
} else {

View File

@ -256,14 +256,8 @@ NIXOS_INSTALL_GRUB=1 chroot $mountPoint \
chroot $mountPoint /nix/var/nix/profiles/system/activate
# Some systems may not be prepared to use NixOS' paths.
export PATH=/run/current-system/sw/bin:/run/current-system/sw/sbin:$PATH
export NIX_PATH=/nix/var/nix/profiles/per-user/root/channels/nixos:nixpkgs=/etc/nixos/nixpkgs
export NIX_PATH=$NIX_PATH:nixos-config=/etc/nixos/configuration.nix:/nix/var/nix/profiles/per-user/root/channels
# Ask the user to set a root password.
if [ "$(chroot $mountPoint nix-instantiate --eval '<nixpkgs/nixos>' -A config.users.mutableUsers)" = true ] && [ -t 0 ] ; then
if [ "$(chroot $mountPoint /run/current-system/sw/bin/sh -l -c "nix-instantiate --eval '<nixpkgs/nixos>' -A config.users.mutableUsers")" = true ] && [ -t 0 ] ; then
echo "setting root password..."
chroot $mountPoint /var/setuid-wrappers/passwd
fi

View File

@ -157,9 +157,9 @@ if [ -n "$buildNix" ]; then
if ! nix-build '<nixpkgs>' -A nix -o $tmpDir/nix "${extraBuildFlags[@]}" > /dev/null; then
machine="$(uname -m)"
if [ "$machine" = x86_64 ]; then
nixStorePath=/nix/store/ffig6yaggbh12dh9y5pnf1grf5lqyipz-nix-1.8
nixStorePath=/nix/store/664kxr14kfgx4dl095crvmr7pbh9xlh5-nix-1.9
elif [[ "$machine" =~ i.86 ]]; then
nixStorePath=/nix/store/lglhfp4mimfa5wzjjf1kqz6f5wlsj2mn-nix-1.8
nixStorePath=/nix/store/p7xdvz72xx3rhm121jclsbdmmcds7xh6-nix-1.9
else
echo "$0: unsupported platform"
exit 1

View File

@ -40,6 +40,7 @@ let
src = ./nixos-generate-config.pl;
path = [ pkgs.btrfsProgs ];
perl = "${pkgs.perl}/bin/perl -I${pkgs.perlPackages.FileSlurp}/lib/perl5/site_perl";
inherit (config.system) nixosRelease;
};
nixos-option = makeProg {
@ -56,7 +57,9 @@ let
in
{
config = {
environment.systemPackages =
[ nixos-build-vms
nixos-install
@ -69,5 +72,7 @@ in
system.build = {
inherit nixos-install nixos-generate-config nixos-option nixos-rebuild;
};
};
}

View File

@ -30,5 +30,5 @@ with lib;
};
};
# impl of assertions is in <nixos/modules/system/activation/top-level.nix>
# impl of assertions is in <nixpkgs/nixos/modules/system/activation/top-level.nix>
}

View File

@ -2,8 +2,13 @@
{
_module.args = {
pkgs_i686 = import ../../lib/nixpkgs.nix {
pkgs_i686 = import ../../.. {
system = "i686-linux";
# FIXME: we enable config.allowUnfree to make packages like
# nvidia-x11 available. This isn't a problem because if the user has
# nixpkgs.config.allowUnfree = false, then evaluation will fail on
# the 64-bit package anyway. However, it would be cleaner to respect
# nixpkgs.config here.
config.allowUnfree = true;
};

View File

@ -226,6 +226,9 @@
gitit = 202;
riemanntools = 203;
subsonic = 204;
riak = 205;
shout = 206;
gateone = 207;
# When adding a uid, make sure it doesn't match an existing gid. And don't use uids above 399!
@ -430,6 +433,9 @@
gitit = 202;
riemanntools = 203;
subsonic = 204;
riak = 205;
#shout = 206; #unused
gateone = 207;
# When adding a gid, make sure it doesn't match an existing
# uid. Users and groups with the same name should have equal

View File

@ -35,7 +35,7 @@ in {
type = types.listOf types.str;
default = [ ];
description = ''
Extra flags to append to <command>updatedb</command>.
Extra flags to pass to <command>updatedb</command>.
'';
};
@ -56,6 +56,14 @@ in {
'';
};
includeStore = mkOption {
type = types.bool;
default = false;
description = ''
Whether to include <filename>/nix/store</filename> in the locate database.
'';
};
};
};
@ -63,7 +71,6 @@ in {
###### implementation
config = {
systemd.services.update-locatedb =
{ description = "Update Locate Database";
path = [ pkgs.su ];
@ -71,8 +78,9 @@ in {
''
mkdir -m 0755 -p $(dirname ${toString cfg.output})
exec updatedb \
--localuser=${cfg.localuser} \
--output=${toString cfg.output} ${concatStringsSep " " cfg.extraFlags}
--localuser=${cfg.localuser} \
${optionalString (!cfg.includeStore) "--prunepaths='/nix/store'"} \
--output=${toString cfg.output} ${concatStringsSep " " cfg.extraFlags}
'';
serviceConfig.Nice = 19;
serviceConfig.IOSchedulingClass = "idle";

View File

@ -72,7 +72,7 @@ in
};
config = {
_module.args.pkgs = import ../../lib/nixpkgs.nix {
_module.args.pkgs = import ../../.. {
system = config.nixpkgs.system;
inherit (config.nixpkgs) config;

View File

@ -6,12 +6,35 @@ with lib;
options = {
system.stateVersion = mkOption {
type = types.str;
default = config.system.nixosRelease;
description = ''
Every once in a while, a new NixOS release may change
configuration defaults in a way incompatible with stateful
data. For instance, if the default version of PostgreSQL
changes, the new version will probably be unable to read your
existing databases. To prevent such breakage, you can set the
value of this option to the NixOS release with which you want
to be compatible. The effect is that NixOS will option
defaults corresponding to the specified release (such as using
an older version of PostgreSQL).
'';
};
system.nixosVersion = mkOption {
internal = true;
type = types.str;
description = "NixOS version.";
};
system.nixosRelease = mkOption {
readOnly = true;
type = types.str;
default = readFile "${toString pkgs.path}/.version";
description = "NixOS release.";
};
system.nixosVersionSuffix = mkOption {
internal = true;
type = types.str;
@ -25,7 +48,7 @@ with lib;
};
system.nixosCodeName = mkOption {
internal = true;
readOnly = true;
type = types.str;
description = "NixOS release code name.";
};
@ -41,8 +64,7 @@ with lib;
config = {
system.nixosVersion =
mkDefault (readFile "${toString pkgs.path}/.version" + config.system.nixosVersionSuffix);
system.nixosVersion = mkDefault (config.system.nixosRelease + config.system.nixosVersionSuffix);
system.nixosVersionSuffix =
let suffixFile = "${toString pkgs.path}/.version-suffix"; in
@ -53,7 +75,7 @@ with lib;
mkDefault (if pathExists fn then readFile fn else "master");
# Note: code names must only increase in alphabetical order.
system.nixosCodeName = "Dingo";
system.nixosCodeName = "Emu";
# Generate /etc/os-release. See
# http://0pointer.de/public/systemd-man/os-release.html for the

View File

@ -41,6 +41,7 @@
./hardware/video/bumblebee.nix
./hardware/video/nvidia.nix
./hardware/video/ati.nix
./installer/tools/auto-upgrade.nix
./installer/tools/nixos-checkout.nix
./installer/tools/tools.nix
./misc/assertions.nix
@ -60,7 +61,6 @@
./programs/command-not-found/command-not-found.nix
./programs/dconf.nix
./programs/environment.nix
./programs/info.nix
./programs/ibus.nix
./programs/kbdlight.nix
./programs/light.nix
@ -72,9 +72,9 @@
./programs/ssmtp.nix
./programs/uim.nix
./programs/venus.nix
./programs/virtualbox-host.nix
./programs/wvdial.nix
./programs/freetds.nix
./programs/xfs_quota.nix
./programs/zsh/zsh.nix
./rename.nix
./security/apparmor.nix
@ -131,6 +131,7 @@
./services/databases/opentsdb.nix
./services/databases/postgresql.nix
./services/databases/redis.nix
./services/databases/riak.nix
./services/databases/virtuoso.nix
./services/desktops/accountsservice.nix
./services/desktops/geoclue2.nix
@ -278,15 +279,18 @@
./services/networking/dnsmasq.nix
./services/networking/docker-registry-server.nix
./services/networking/ejabberd.nix
./services/networking/fan.nix
./services/networking/firefox/sync-server.nix
./services/networking/firewall.nix
./services/networking/flashpolicyd.nix
./services/networking/freenet.nix
./services/networking/gateone.nix
./services/networking/git-daemon.nix
./services/networking/gnunet.nix
./services/networking/gogoclient.nix
./services/networking/gvpe.nix
./services/networking/haproxy.nix
./services/networking/heyefi.nix
./services/networking/hostapd.nix
./services/networking/i2pd.nix
./services/networking/i2p.nix
@ -326,6 +330,8 @@
./services/networking/searx.nix
./services/networking/seeks.nix
./services/networking/skydns.nix
./services/networking/shout.nix
./services/networking/softether.nix
./services/networking/spiped.nix
./services/networking/sslh.nix
./services/networking/ssh/lshd.nix
@ -387,6 +393,7 @@
./services/web-servers/lighttpd/default.nix
./services/web-servers/lighttpd/gitweb.nix
./services/web-servers/nginx/default.nix
./services/web-servers/nginx/reverse_proxy.nix
./services/web-servers/phpfpm.nix
./services/web-servers/shellinabox.nix
./services/web-servers/tomcat.nix
@ -483,6 +490,7 @@
./virtualisation/openvswitch.nix
./virtualisation/parallels-guest.nix
./virtualisation/virtualbox-guest.nix
./virtualisation/virtualbox-host.nix
./virtualisation/vmware-guest.nix
./virtualisation/xen-dom0.nix
]

View File

@ -30,7 +30,7 @@ let
relocatedModuleFiles =
let
relocateNixOS = path:
"<nixos" + removePrefix nixosPath (toString path) + ">";
"<nixpkgs/nixos" + removePrefix nixosPath (toString path) + ">";
relocateOthers = null;
in
{ nixos = map relocateNixOS partitionedModuleFiles.nixos;

View File

@ -7,6 +7,8 @@ with lib;
{
environment.noXlibs = mkDefault true;
i18n.supportedLocales = [ config.i18n.defaultLocale ];
# This isn't perfect, but let's expect the user specifies an UTF-8 defaultLocale
i18n.supportedLocales = [ (config.i18n.defaultLocale + "/UTF-8") ];
services.nixosManual.enable = mkDefault false;
}

View File

@ -57,9 +57,9 @@ in
if [ $? = 126 ]; then
"$@"
fi
else
else
# Indicate than there was an error so ZSH falls back to its default handler
return 127
return 127
fi
}
'';

View File

@ -30,11 +30,11 @@ The program $program is currently not installed. It is provided by
the package $package, which I will now install for you.
EOF
;
exit 126 if system("nix-env", "-i", $package) == 0;
exit 126 if system("nix-env", "-iA", "nixos.$package") == 0;
} else {
print STDERR <<EOF;
The program $program is currently not installed. You can install it by typing:
nix-env -i $package
nix-env -iA nixos.$package
EOF
}
} else {
@ -42,7 +42,7 @@ EOF
The program $program is currently not installed. It is provided by
several packages. You can install it by typing one of the following:
EOF
print STDERR " nix-env -i $_->{package}\n" foreach @$res;
print STDERR " nix-env -iA nixos.$_->{package}\n" foreach @$res;
}
exit 127;

View File

@ -23,15 +23,6 @@ in
EDITOR = mkDefault "nano";
};
environment.sessionVariables =
{ NIX_PATH =
[ "/nix/var/nix/profiles/per-user/root/channels/nixos"
"nixpkgs=/etc/nixos/nixpkgs"
"nixos-config=/etc/nixos/configuration.nix"
"/nix/var/nix/profiles/per-user/root/channels"
];
};
environment.profiles =
[ "$HOME/.nix-profile"
"/nix/var/nix/profiles/default"

View File

@ -1,38 +0,0 @@
{config, pkgs, ...}:
let
texinfo = pkgs.texinfoInteractive;
# Quick hack to make the `info' command work properly. `info' needs
# a "dir" file containing all the installed Info files, which we
# don't have (it would be impure to have a package installation
# update some global "dir" file). So this wrapper script around
# "info" builds a temporary "dir" file on the fly. This is a bit
# slow (on a cold cache) but not unacceptably so.
infoWrapper = pkgs.writeScriptBin "info"
''
#! ${pkgs.stdenv.shell}
dir=$(mktemp --tmpdir -d "info.dir.XXXXXX")
if test -z "$dir"; then exit 1; fi
trap 'rm -rf "$dir"' EXIT
shopt -s nullglob
for i in $(IFS=:; echo $INFOPATH); do
for j in $i/*.info; do
${texinfo}/bin/install-info --quiet $j $dir/dir
done
done
INFOPATH=$dir:$INFOPATH ${texinfo}/bin/info "$@"
''; # */
in
{
environment.systemPackages = [ infoWrapper texinfo ];
}

View File

@ -18,6 +18,14 @@ let
exec ${askPassword}
'';
knownHosts = map (h: getAttr h cfg.knownHosts) (attrNames cfg.knownHosts);
knownHostsText = flip (concatMapStringsSep "\n") knownHosts
(h: assert h.hostNames != [];
concatStringsSep "," h.hostNames + " "
+ (if h.publicKey != null then h.publicKey else readFile h.publicKeyFile)
);
in
{
###### interface
@ -92,31 +100,93 @@ in
'';
};
knownHosts = mkOption {
default = {};
type = types.loaOf (types.submodule ({ name, ... }: {
options = {
hostNames = mkOption {
type = types.listOf types.str;
default = [];
description = ''
A list of host names and/or IP numbers used for accessing
the host's ssh service.
'';
};
publicKey = mkOption {
default = null;
type = types.nullOr types.str;
example = "ecdsa-sha2-nistp521 AAAAE2VjZHN...UEPg==";
description = ''
The public key data for the host. You can fetch a public key
from a running SSH server with the <command>ssh-keyscan</command>
command. The public key should not include any host names, only
the key type and the key itself.
'';
};
publicKeyFile = mkOption {
default = null;
type = types.nullOr types.path;
description = ''
The path to the public key file for the host. The public
key file is read at build time and saved in the Nix store.
You can fetch a public key file from a running SSH server
with the <command>ssh-keyscan</command> command. The content
of the file should follow the same format as described for
the <literal>publicKey</literal> option.
'';
};
};
config = {
hostNames = mkDefault [ name ];
};
}));
description = ''
The set of system-wide known SSH hosts.
'';
example = [
{
hostNames = [ "myhost" "myhost.mydomain.com" "10.10.1.4" ];
publicKeyFile = literalExample "./pubkeys/myhost_ssh_host_dsa_key.pub";
}
{
hostNames = [ "myhost2" ];
publicKeyFile = literalExample "./pubkeys/myhost2_ssh_host_dsa_key.pub";
}
];
};
};
};
config = {
assertions = singleton
{ assertion = cfg.forwardX11 -> cfg.setXAuthLocation;
message = "cannot enable X11 forwarding without setting XAuth location";
};
environment.etc =
[ { # SSH configuration. Slight duplication of the sshd_config
# generation in the sshd service.
source = pkgs.writeText "ssh_config" ''
AddressFamily ${if config.networking.enableIPv6 then "any" else "inet"}
${optionalString cfg.setXAuthLocation ''
XAuthLocation ${pkgs.xorg.xauth}/bin/xauth
''}
ForwardX11 ${if cfg.forwardX11 then "yes" else "no"}
${cfg.extraConfig}
'';
target = "ssh/ssh_config";
assertions =
[ { assertion = cfg.forwardX11 -> cfg.setXAuthLocation;
message = "cannot enable X11 forwarding without setting XAuth location";
}
];
] ++ flip mapAttrsToList cfg.knownHosts (name: data: {
assertion = (data.publicKey == null && data.publicKeyFile != null) ||
(data.publicKey != null && data.publicKeyFile == null);
message = "knownHost ${name} must contain either a publicKey or publicKeyFile";
});
# SSH configuration. Slight duplication of the sshd_config
# generation in the sshd service.
environment.etc."ssh/ssh_config".text =
''
AddressFamily ${if config.networking.enableIPv6 then "any" else "inet"}
${optionalString cfg.setXAuthLocation ''
XAuthLocation ${pkgs.xorg.xauth}/bin/xauth
''}
ForwardX11 ${if cfg.forwardX11 then "yes" else "no"}
${cfg.extraConfig}
'';
environment.etc."ssh/ssh_known_hosts".text = knownHostsText;
# FIXME: this should really be socket-activated for über-awesomeness.
systemd.user.services.ssh-agent =

View File

@ -0,0 +1,110 @@
# Configuration for the xfs_quota command
{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.programs.xfs_quota;
limitOptions = opts: concatStringsSep " " [
(optionalString (opts.sizeSoftLimit != null) "bsoft=${opts.sizeSoftLimit}")
(optionalString (opts.sizeHardLimit != null) "bhard=${opts.sizeHardLimit}")
];
in
{
###### interface
options = {
programs.xfs_quota = {
projects = mkOption {
default = {};
type = types.attrsOf (types.submodule {
options = {
id = mkOption {
type = types.int;
description = "Project ID.";
};
fileSystem = mkOption {
type = types.string;
description = "XFS filesystem hosting the xfs_quota project.";
default = "/";
};
path = mkOption {
type = types.string;
description = "Project directory.";
};
sizeSoftLimit = mkOption {
type = types.nullOr types.string;
default = null;
example = "30g";
description = "Soft limit of the project size";
};
sizeHardLimit = mkOption {
type = types.nullOr types.string;
default = null;
example = "50g";
description = "Hard limit of the project size.";
};
};
});
description = "Setup of xfs_quota projects. Make sure the filesystem is mounted with the pquota option.";
example = {
"projname" = {
id = 50;
path = "/xfsprojects/projname";
sizeHardLimit = "50g";
};
};
};
};
};
###### implementation
config = mkIf (cfg.projects != {}) {
environment.etc.projects.source = pkgs.writeText "etc-project"
(concatStringsSep "\n" (mapAttrsToList
(name: opts: "${toString opts.id}:${opts.path}") cfg.projects));
environment.etc.projid.source = pkgs.writeText "etc-projid"
(concatStringsSep "\n" (mapAttrsToList
(name: opts: "${name}:${toString opts.id}") cfg.projects));
systemd.services = mapAttrs' (name: opts:
nameValuePair "xfs_quota-${name}" {
description = "Setup xfs_quota for project ${name}";
script = ''
${pkgs.xfsprogs}/bin/xfs_quota -x -c 'project -s ${name}' ${opts.fileSystem}
${pkgs.xfsprogs}/bin/xfs_quota -x -c 'limit -p ${limitOptions opts} ${name}' ${opts.fileSystem}
'';
wantedBy = [ "multi-user.target" ];
after = [ ((replaceChars [ "/" ] [ "-" ] opts.fileSystem) + ".mount") ];
restartTriggers = [ config.environment.etc.projects.source ];
serviceConfig = {
Type = "oneshot";
RemainAfterExit = true;
};
}
) cfg.projects;
};
}

View File

@ -77,6 +77,8 @@ in zipModules ([]
++ obsolete [ "environment" "nix" ] [ "nix" "package" ]
++ obsolete [ "fonts" "enableFontConfig" ] [ "fonts" "fontconfig" "enable" ]
++ obsolete [ "fonts" "extraFonts" ] [ "fonts" "fonts" ]
++ alias [ "users" "extraUsers" ] [ "users" "users" ]
++ alias [ "users" "extraGroups" ] [ "users" "groups" ]
++ obsolete [ "security" "extraSetuidPrograms" ] [ "security" "setuidPrograms" ]
++ obsolete [ "networking" "enableWLAN" ] [ "networking" "wireless" "enable" ]
@ -98,6 +100,9 @@ in zipModules ([]
++ obsolete [ "boot" "initrd" "extraKernelModules" ] [ "boot" "initrd" "kernelModules" ]
++ obsolete [ "boot" "extraKernelParams" ] [ "boot" "kernelParams" ]
# smartd
++ obsolete [ "services" "smartd" "deviceOpts" ] [ "services" "smartd" "defaults" "monitored" ]
# OpenSSH
++ obsolete [ "services" "sshd" "ports" ] [ "services" "openssh" "ports" ]
++ alias [ "services" "sshd" "enable" ] [ "services" "openssh" "enable" ]
@ -107,9 +112,17 @@ in zipModules ([]
++ obsolete [ "services" "sshd" "permitRootLogin" ] [ "services" "openssh" "permitRootLogin" ]
++ obsolete [ "services" "xserver" "startSSHAgent" ] [ "services" "xserver" "startOpenSSHAgent" ]
++ obsolete [ "services" "xserver" "startOpenSSHAgent" ] [ "programs" "ssh" "startAgent" ]
++ alias [ "services" "openssh" "knownHosts" ] [ "programs" "ssh" "knownHosts" ]
# VirtualBox
++ obsolete [ "services" "virtualbox" "enable" ] [ "services" "virtualboxGuest" "enable" ]
++ obsolete [ "services" "virtualbox" "enable" ] [ "virtualisation" "virtualbox" "guest" "enable" ]
++ obsolete [ "services" "virtualboxGuest" "enable" ] [ "virtualisation" "virtualbox" "guest" "enable" ]
++ obsolete [ "programs" "virtualbox" "enable" ] [ "virtualisation" "virtualbox" "host" "enable" ]
++ obsolete [ "programs" "virtualbox" "addNetworkInterface" ] [ "virtualisation" "virtualbox" "host" "addNetworkInterface" ]
++ obsolete [ "programs" "virtualbox" "enableHardening" ] [ "virtualisation" "virtualbox" "host" "enableHardening" ]
++ obsolete [ "services" "virtualboxHost" "enable" ] [ "virtualisation" "virtualbox" "host" "enable" ]
++ obsolete [ "services" "virtualboxHost" "addNetworkInterface" ] [ "virtualisation" "virtualbox" "host" "addNetworkInterface" ]
++ obsolete [ "services" "virtualboxHost" "enableHardening" ] [ "virtualisation" "virtualbox" "host" "enableHardening" ]
# Tarsnap
++ obsolete [ "services" "tarsnap" "config" ] [ "services" "tarsnap" "archives" ]

View File

@ -37,13 +37,5 @@ in
) cfg.profiles;
};
};
security.pam.services.apparmor.text = ''
## AppArmor changes hats according to `order`: first try user, then
## group, and finally fall back to a hat called "DEFAULT"
##
## For now, enable debugging as this is an experimental feature.
session optional ${pkgs.apparmor-pam}/lib/security/pam_apparmor.so order=user,group,default debug
'';
};
}

View File

@ -192,6 +192,16 @@ let
description = "Whether to log authentication failures in <filename>/var/log/faillog</filename>.";
};
enableAppArmor = mkOption {
default = false;
type = types.bool;
description = ''
Enable support for attaching AppArmor profiles at the
user/group level, e.g., as part of a role based access
control scheme.
'';
};
text = mkOption {
type = types.nullOr types.lines;
description = "Contents of the PAM service file.";
@ -251,9 +261,9 @@ let
${optionalString (!(config.security.pam.enableEcryptfs || cfg.pamMount)) "auth required pam_deny.so"}
# Password management.
password requisite pam_unix.so nullok sha512
${optionalString config.security.pam.enableEcryptfs
"password optional ${pkgs.ecryptfs}/lib/security/pam_ecryptfs.so"}
password requisite pam_unix.so nullok sha512
${optionalString cfg.pamMount
"password optional ${pkgs.pam_mount}/lib/security/pam_mount.so"}
${optionalString config.users.ldap.enable
@ -294,6 +304,8 @@ let
"session optional ${pkgs.pam}/lib/security/pam_motd.so motd=${motd}"}
${optionalString cfg.pamMount
"session optional ${pkgs.pam_mount}/lib/security/pam_mount.so"}
${optionalString (cfg.enableAppArmor && config.security.apparmor.enable)
"session optional ${pkgs.apparmor-pam}/lib/security/pam_apparmor.so order=user,group,default debug"}
'';
};

View File

@ -78,12 +78,6 @@ in {
type = types.int;
};
readOnlyPort = mkOption {
description = "Kubernets apiserver read-only port.";
default = 7080;
type = types.int;
};
securePort = mkOption {
description = "Kubernetes apiserver secure port.";
default = 6443;
@ -102,10 +96,16 @@ in {
type = types.str;
};
clientCaFile = mkOption {
description = "Kubernetes apiserver CA file for client auth.";
default = "";
type = types.str;
};
tokenAuth = mkOption {
description = ''
Kubernetes apiserver token authentication file. See
<link xlink:href="https://github.com/GoogleCloudPlatform/kubernetes/blob/master/docs/authentication.md"/>
<link xlink:href="http://kubernetes.io/v1.0/docs/admin/authentication.html"/>
'';
default = {};
example = literalExample ''
@ -120,7 +120,7 @@ in {
authorizationMode = mkOption {
description = ''
Kubernetes apiserver authorization mode (AlwaysAllow/AlwaysDeny/ABAC). See
<link xlink:href="https://github.com/GoogleCloudPlatform/kubernetes/blob/master/docs/authorization.md"/>
<link xlink:href="http://kubernetes.io/v1.0/docs/admin/authorization.html"/>
'';
default = "AlwaysAllow";
type = types.enum ["AlwaysAllow" "AlwaysDeny" "ABAC"];
@ -129,7 +129,7 @@ in {
authorizationPolicy = mkOption {
description = ''
Kubernetes apiserver authorization policy file. See
<link xlink:href="https://github.com/GoogleCloudPlatform/kubernetes/blob/master/docs/authorization.md"/>
<link xlink:href="http://kubernetes.io/v1.0/docs/admin/authorization.html"/>
'';
default = [];
example = literalExample ''
@ -158,6 +158,38 @@ in {
type = types.str;
};
runtimeConfig = mkOption {
description = ''
Api runtime configuration. See
<link xlink:href="http://kubernetes.io/v1.0/docs/admin/cluster-management.html"/>
'';
default = "";
example = "api/all=false,api/v1=true";
type = types.str;
};
admissionControl = mkOption {
description = ''
Kubernetes admission control plugins to use. See
<link xlink:href="http://kubernetes.io/v1.0/docs/admin/admission-controllers.html"/>
'';
default = ["AlwaysAdmit"];
example = [
"NamespaceLifecycle" "NamespaceExists" "LimitRanger"
"SecurityContextDeny" "ServiceAccount" "ResourceQuota"
];
type = types.listOf types.str;
};
serviceAccountKey = mkOption {
description = ''
Kubernetes apiserver PEM-encoded x509 RSA private or public key file,
used to verify ServiceAccount tokens.
'';
default = null;
type = types.nullOr types.path;
};
extraOpts = mkOption {
description = "Kubernetes apiserver extra command line options.";
default = "";
@ -222,14 +254,26 @@ in {
type = types.str;
};
machines = mkOption {
description = "Kubernetes controller list of machines to schedule to schedule onto";
default = [];
type = types.listOf types.str;
serviceAccountPrivateKey = mkOption {
description = ''
Kubernetes controller manager PEM-encoded private RSA key file used to
sign service account tokens
'';
default = null;
type = types.nullOr types.path;
};
rootCaFile = mkOption {
description = ''
Kubernetes controller manager certificate authority file included in
service account's token secret.
'';
default = null;
type = types.nullOr types.path;
};
extraOpts = mkOption {
description = "Kubernetes controller extra command line options.";
description = "Kubernetes controller manager extra command line options.";
default = "";
type = types.str;
};
@ -260,6 +304,20 @@ in {
type = types.int;
};
healthz = {
bind = mkOption {
description = "Kubernetes kubelet healthz listening address.";
default = "127.0.0.1";
type = types.str;
};
port = mkOption {
description = "Kubernetes kubelet healthz port.";
default = 10248;
type = types.int;
};
};
hostname = mkOption {
description = "Kubernetes kubelet hostname override";
default = config.networking.hostName;
@ -273,7 +331,10 @@ in {
};
apiServers = mkOption {
description = "Kubernetes kubelet list of Kubernetes API servers for publishing events, and reading pods and services.";
description = ''
Kubernetes kubelet list of Kubernetes API servers for publishing events,
and reading pods and services.
'';
default = ["${cfg.apiserver.address}:${toString cfg.apiserver.port}"];
type = types.listOf types.str;
};
@ -374,7 +435,6 @@ in {
--etcd-servers=${concatMapStringsSep "," (f: "http://${f}") cfg.etcdServers} \
--insecure-bind-address=${cfg.apiserver.address} \
--insecure-port=${toString cfg.apiserver.port} \
--read-only-port=${toString cfg.apiserver.readOnlyPort} \
--bind-address=${cfg.apiserver.publicAddress} \
--allow-privileged=${if cfg.apiserver.allowPrivileged then "true" else "false"} \
${optionalString (cfg.apiserver.tlsCertFile!="")
@ -383,22 +443,24 @@ in {
"--tls-private-key-file=${cfg.apiserver.tlsPrivateKeyFile}"} \
${optionalString (cfg.apiserver.tokenAuth!=[])
"--token-auth-file=${tokenAuthFile}"} \
${optionalString (cfg.apiserver.clientCaFile!="")
"--client-ca-file=${cfg.apiserver.clientCaFile}"} \
--authorization-mode=${cfg.apiserver.authorizationMode} \
${optionalString (cfg.apiserver.authorizationMode == "ABAC")
"--authorization-policy-file=${authorizationPolicyFile}"} \
--secure-port=${toString cfg.apiserver.securePort} \
--service-cluster-ip-range=${cfg.apiserver.portalNet} \
${optionalString (cfg.apiserver.runtimeConfig!="")
"--runtime-config=${cfg.apiserver.runtimeConfig}"} \
--admission_control=${concatStringsSep "," cfg.apiserver.admissionControl} \
${optionalString (cfg.apiserver.serviceAccountKey!=null)
"--service-account-key-file=${cfg.apiserver.serviceAccountKey}"} \
--logtostderr=true \
${optionalString cfg.verbose "--v=6 --log-flush-frequency=1s"} \
${cfg.apiserver.extraOpts}
'';
User = "kubernetes";
};
postStart = ''
until ${pkgs.curl}/bin/curl -s -o /dev/null 'http://${cfg.apiserver.address}:${toString cfg.apiserver.port}/'; do
sleep 1;
done
'';
};
})
@ -431,7 +493,10 @@ in {
--address=${cfg.controllerManager.address} \
--port=${toString cfg.controllerManager.port} \
--master=${cfg.controllerManager.master} \
--machines=${concatStringsSep "," cfg.controllerManager.machines} \
${optionalString (cfg.controllerManager.serviceAccountPrivateKey!=null)
"--service-account-private-key-file=${cfg.controllerManager.serviceAccountPrivateKey}"} \
${optionalString (cfg.controllerManager.rootCaFile!=null)
"--root-ca-file=${cfg.controllerManager.rootCaFile}"} \
--logtostderr=true \
${optionalString cfg.verbose "--v=6 --log-flush-frequency=1s"} \
${cfg.controllerManager.extraOpts}
@ -454,6 +519,8 @@ in {
--register-node=${if cfg.kubelet.registerNode then "true" else "false"} \
--address=${cfg.kubelet.address} \
--port=${toString cfg.kubelet.port} \
--healthz-bind-address=${cfg.kubelet.healthz.bind} \
--healthz-port=${toString cfg.kubelet.healthz.port} \
--hostname-override=${cfg.kubelet.hostname} \
--allow-privileged=${if cfg.kubelet.allowPrivileged then "true" else "false"} \
--root-dir=${cfg.dataDir} \
@ -483,6 +550,8 @@ in {
${optionalString cfg.verbose "--v=6 --log-flush-frequency=1s"} \
${cfg.proxy.extraOpts}
'';
Restart = "always"; # Retry connection
RestartSec = "5s";
};
};
})
@ -504,9 +573,6 @@ in {
User = "kubernetes";
};
};
services.skydns.enable = mkDefault true;
services.skydns.domain = mkDefault cfg.kubelet.clusterDomain;
})
(mkIf (any (el: el == "master") cfg.roles) {
@ -524,6 +590,9 @@ in {
(mkIf (any (el: el == "node" || el == "master") cfg.roles) {
services.etcd.enable = mkDefault true;
services.skydns.enable = mkDefault true;
services.skydns.domain = mkDefault cfg.kubelet.clusterDomain;
})
(mkIf (
@ -538,8 +607,10 @@ in {
serviceConfig.Type = "oneshot";
script = ''
mkdir -p /var/run/kubernetes
chown kubernetes /var/run/kubernetes
ln -fs ${pkgs.writeText "kubernetes-dockercfg" cfg.dockerCfg} /var/run/kubernetes/.dockercfg
chown kubernetes /var/lib/kubernetes
rm ${cfg.dataDir}/.dockercfg || true
ln -fs ${pkgs.writeText "kubernetes-dockercfg" cfg.dockerCfg} ${cfg.dataDir}/.dockercfg
'';
};

View File

@ -154,6 +154,12 @@ in
config = mkIf config.services.postgresql.enable {
services.postgresql.package =
# Note: when changing the default, make it conditional on
# system.stateVersion to maintain compatibility with existing
# systems!
mkDefault pkgs.postgresql94;
services.postgresql.authentication = mkAfter
''
# Generated file; do not edit!
@ -207,6 +213,7 @@ in
serviceConfig =
{ ExecStart = "@${postgresql}/bin/postgres postgres ${toString flags}";
ExecReload = "${pkgs.coreutils}/bin/kill -HUP $MAINPID";
User = "postgres";
Group = "postgres";
PermissionsStartOnly = true;

View File

@ -0,0 +1,148 @@
{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.services.riak;
in
{
###### interface
options = {
services.riak = {
enable = mkEnableOption "riak";
package = mkOption {
type = types.package;
example = literalExample "pkgs.riak2";
description = ''
Riak package to use.
'';
};
nodeName = mkOption {
type = types.string;
default = "riak@127.0.0.1";
description = ''
Name of the Erlang node.
'';
};
distributedCookie = mkOption {
type = types.string;
default = "riak";
description = ''
Cookie for distributed node communication. All nodes in the
same cluster should use the same cookie or they will not be able to
communicate.
'';
};
dataDir = mkOption {
type = types.path;
default = "/var/db/riak";
description = ''
Data directory for Riak.
'';
};
logDir = mkOption {
type = types.path;
default = "/var/log/riak";
description = ''
Log directory for Riak.
'';
};
extraConfig = mkOption {
type = types.lines;
default = "";
description = ''
Additional text to be appended to <filename>riak.conf</filename>.
'';
};
};
};
###### implementation
config = mkIf cfg.enable {
environment.systemPackages = [ cfg.package ];
environment.etc."riak/riak.conf".text = ''
nodename = ${cfg.nodeName}
distributed_cookie = ${cfg.distributedCookie}
platform_log_dir = ${cfg.logDir}
platform_etc_dir = /etc/riak
platform_data_dir = ${cfg.dataDir}
${cfg.extraConfig}
'';
users.extraUsers.riak = {
name = "riak";
uid = config.ids.uids.riak;
group = "riak";
description = "Riak server user";
};
users.extraGroups.riak.gid = config.ids.gids.riak;
systemd.services.riak = {
description = "Riak Server";
wantedBy = [ "multi-user.target" ];
after = [ "network.target" ];
path = [
pkgs.utillinux # for `logger`
pkgs.bash
];
environment.RIAK_DATA_DIR = "${cfg.dataDir}";
environment.RIAK_LOG_DIR = "${cfg.logDir}";
environment.RIAK_ETC_DIR = "/etc/riak";
preStart = ''
if ! test -e ${cfg.logDir}; then
mkdir -m 0755 -p ${cfg.logDir}
chown -R riak ${cfg.logDir}
fi
if ! test -e ${cfg.dataDir}; then
mkdir -m 0700 -p ${cfg.dataDir}
chown -R riak ${cfg.dataDir}
fi
'';
serviceConfig = {
ExecStart = "${cfg.package}/bin/riak console";
ExecStop = "${cfg.package}/bin/riak stop";
StandardInput = "tty";
User = "riak";
Group = "riak";
PermissionsStartOnly = true;
# Give Riak a decent amount of time to clean up.
TimeoutStopSec = 120;
LimitNOFILE = 65536;
};
unitConfig.RequiresMountsFor = [
"${cfg.dataDir}"
"${cfg.logDir}"
"/etc/riak"
];
};
};
}

View File

@ -39,11 +39,14 @@ with lib;
mkService = dev:
assert dev != "";
let dev' = utils.escapeSystemdPath dev; in
nameValuePair "freefall-${dev'}"
{ description = "Free-fall protection for ${dev}";
nameValuePair "freefall-${dev'}" {
description = "Free-fall protection for ${dev}";
after = [ "${dev'}.device" ];
wantedBy = [ "${dev'}.device" ];
path = [ pkgs.freefall ];
unitConfig = {
DefaultDependencies = false;
};
serviceConfig = {
ExecStart = "${pkgs.freefall}/bin/freefall ${dev}";
Restart = "on-failure";

View File

@ -17,8 +17,8 @@ let
# what is available directly from the PCR registers.
firmware_log_file = /sys/kernel/security/tpm0/binary_bios_measurements
kernel_log_file = /sys/kernel/security/ima/binary_runtime_measurements
#firmware_pcrs = 0,1,2,3,4,5,6,7
#kernel_pcrs = 10,11
firmware_pcrs = ${cfg.firmwarePCRs}
kernel_pcrs = ${cfg.kernelPCRs}
platform_cred = ${cfg.platformCred}
conformance_cred = ${cfg.conformanceCred}
endorsement_cred = ${cfg.endorsementCred}
@ -60,20 +60,32 @@ in
};
stateDir = mkOption {
default = "/var/lib/tpm";
default = "/var/lib/tpm";
type = types.path;
description = ''
description = ''
The location of the system persistent storage file.
The system persistent storage file holds keys and data across
restarts of the TCSD and system reboots.
'';
'';
};
firmwarePCRs = mkOption {
default = "0,1,2,3,4,5,6,7";
type = types.string;
description = "PCR indices used in the TPM for firmware measurements.";
};
kernelPCRs = mkOption {
default = "8,9,10,11,12";
type = types.string;
description = "PCR indices used in the TPM for kernel measurements.";
};
platformCred = mkOption {
default = "${cfg.stateDir}/platform.cert";
type = types.path;
description = ''
Path to the platform credential for your TPM. Your TPM
Path to the platform credential for your TPM. Your TPM
manufacturer may have provided you with a set of credentials
(certificates) that should be used when creating identities
using your TPM. When a user of your TPM makes an identity,

View File

@ -171,25 +171,23 @@ in
};
hardware.firmware = mkOption {
type = types.listOf types.path;
type = types.listOf types.package;
default = [];
description = ''
List of directories containing firmware files. Such files
List of packages containing firmware files. Such files
will be loaded automatically if the kernel asks for them
(i.e., when it has detected specific hardware that requires
firmware to function). If more than one path contains a
firmware file with the same name, the first path in the list
takes precedence. Note that you must rebuild your system if
you add files to any of these directories. For quick testing,
firmware to function). If multiple packages contain firmware
files with the same name, the first package in the list takes
precedence. Note that you must rebuild your system if you add
files to any of these directories. For quick testing,
put firmware files in <filename>/root/test-firmware</filename>
and add that directory to the list. Note that you can also
add firmware packages to this list as these are directories in
the nix store.
and add that directory to the list.
'';
apply = list: pkgs.buildEnv {
name = "firmware";
paths = list;
pathsToLink = [ "/" ];
pathsToLink = [ "/lib/firmware" ];
ignoreCollisions = true;
};
};
@ -236,7 +234,7 @@ in
(isYes "NET")
];
boot.extraModprobeConfig = "options firmware_class path=${config.hardware.firmware}";
boot.extraModprobeConfig = "options firmware_class path=${config.hardware.firmware}/lib/firmware";
system.activationScripts.udevd =
''
@ -254,7 +252,7 @@ in
# Allow the kernel to find our firmware.
if [ -e /sys/module/firmware_class/parameters/path ]; then
echo -n "${config.hardware.firmware}" > /sys/module/firmware_class/parameters/path
echo -n "${config.hardware.firmware}/lib/firmware" > /sys/module/firmware_class/parameters/path
fi
'';

View File

@ -10,7 +10,7 @@ let
''
base_dir = /var/run/dovecot2/
protocols = ${optionalString cfg.enableImap "imap"} ${optionalString cfg.enablePop3 "pop3"}
protocols = ${optionalString cfg.enableImap "imap"} ${optionalString cfg.enablePop3 "pop3"} ${optionalString cfg.enableLmtp "lmtp"}
''
+ (if cfg.sslServerCert!="" then
''
@ -70,6 +70,11 @@ in
description = "Start the IMAP listener (when Dovecot is enabled).";
};
enableLmtp = mkOption {
default = false;
description = "Start the LMTP listener (when Dovecot is enabled).";
};
user = mkOption {
default = "dovecot2";
description = "Dovecot user name.";

View File

@ -11,7 +11,7 @@ let
listCtl = domain: list: "${listDir domain list}/control";
transport = domain: list: "${domain}--${list}@local.list.mlmmj mlmmj:${domain}/${list}";
virtual = domain: list: "${list}@${domain} ${domain}--${list}@local.list.mlmmj";
alias = domain: list: "${list}: \"|${pkgs.mlmmj}/mlmmj-receive -L ${listDir domain list}/\"";
alias = domain: list: "${list}: \"|${pkgs.mlmmj}/bin/mlmmj-receive -L ${listDir domain list}/\"";
subjectPrefix = list: "[${list}]";
listAddress = domain: list: "${list}@${domain}";
customHeaders = list: domain: [ "List-Id: ${list}" "Reply-To: ${list}@${domain}" ];

View File

@ -63,7 +63,7 @@ in {
package = mkOption {
description = "Confd package to use.";
default = pkgs.goPackages.confd;
default = pkgs.confd;
type = types.package;
};
};

View File

@ -122,14 +122,6 @@ in {
mkdir -m 0700 -p ${cfg.dataDir}
if [ "$(id -u)" = 0 ]; then chown etcd ${cfg.dataDir}; fi
'';
postStart = ''
until ${pkgs.etcdctl}/bin/etcdctl set /nixos/state 'up'; do
sleep 1;
done
until ${pkgs.etcdctl}/bin/etcdctl get /nixos/state | grep up; do
sleep 1;
done
'';
};
environment.systemPackages = [ pkgs.etcdctl ];

View File

@ -8,6 +8,8 @@ let
homeDir = "/var/lib/gitit";
toYesNo = b: if b then "yes" else "no";
gititShared = with cfg.haskellPackages; gitit + "/share/" + pkgs.stdenv.system + "-" + ghc.name + "/" + gitit.pname + "-" + gitit.version;
gititWithPkgs = hsPkgs: extras: hsPkgs.ghcWithPackages (self: with self; [ gitit ] ++ (extras self));
@ -17,9 +19,6 @@ let
in writeScript "gitit" ''
#!${stdenv.shell}
cd $HOME
export PATH="${makeSearchPath "bin" (
[ git curl ] ++ (if cfg.pdfExport == "yes" then [texLiveFull] else [])
)}:$PATH";
export NIX_GHC="${env}/bin/ghc"
export NIX_GHCPKG="${env}/bin/ghc-pkg"
export NIX_GHC_DOCDIR="${env}/share/doc/ghc/html"
@ -27,11 +26,7 @@ let
${env}/bin/gitit -f ${configFile}
'';
gititOptions = let
yesNo = types.enum [ "yes" "no" ];
in {
gititOptions = {
enable = mkOption {
type = types.bool;
@ -40,7 +35,6 @@ let
};
haskellPackages = mkOption {
default = pkgs.haskellPackages;
defaultText = "pkgs.haskellPackages";
example = literalExample "pkgs.haskell.packages.ghc784";
description = "haskellPackages used to build gitit and plugins.";
@ -143,7 +137,6 @@ let
staticDir = mkOption {
type = types.path;
default = gititShared + "/data/static";
description = ''
Specifies the path of the static directory (containing javascript,
css, and images). If it does not exist, gitit will create it and
@ -204,8 +197,8 @@ let
};
showLhsBirdTracks = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
Specifies whether to show Haskell code blocks in "bird style", with
"> " at the beginning of each line.
@ -214,7 +207,6 @@ let
templatesDir = mkOption {
type = types.path;
default = gititShared + "/data/templates";
description = ''
Specifies the path of the directory containing page templates. If it
does not exist, gitit will create it with default templates. Users
@ -286,8 +278,8 @@ let
};
tableOfContents = mkOption {
type = yesNo;
default = "yes";
type = types.bool;
default = true;
description = ''
Specifies whether to print a tables of contents (with links to
sections) on each wiki page.
@ -295,23 +287,18 @@ let
};
plugins = mkOption {
type = types.path;
default = gititShared + "/plugins/Dot.hs";
type = with types; listOf str;
description = ''
Specifies a list of plugins to load. Plugins may be specified either
by their path or by their module name. If the plugin name starts
Specifies a list of plugins to load. Plugins may be specified either
by their path or by their module name. If the plugin name starts
with Gitit.Plugin., gitit will assume that the plugin is an installed
module and will not try to find a source file.
Examples:
plugins: plugins/DotPlugin.hs, CapitalizeEmphasisPlugin.hs
plugins: plugins/DotPlugin
plugins: Gitit.Plugin.InterwikiLinks
'';
};
useCache = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
Specifies whether to cache rendered pages. Note that if use-feed is
selected, feeds will be cached regardless of the value of use-cache.
@ -342,14 +329,14 @@ let
};
debugMode = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = "Causes debug information to be logged while gitit is running.";
};
compressResponses = mkOption {
type = yesNo;
default = "yes";
type = types.bool;
default = true;
description = "Specifies whether HTTP responses should be compressed.";
};
@ -361,16 +348,18 @@ let
line of the file should contain two fields, separated by whitespace.
The first field is the mime type, the second is a file extension.
For example:
video/x-ms-wmx wmx
<programlisting>
video/x-ms-wmx wmx
</programlisting>
If the file is not found, some simple defaults will be used.
'';
};
useReCaptcha = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
If "yes", causes gitit to use the reCAPTCHA service
If true, causes gitit to use the reCAPTCHA service
(http://recaptcha.net) to prevent bots from creating accounts.
'';
};
@ -475,8 +464,8 @@ let
};
useFeed = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
Specifies whether an ATOM feed should be enabled (for the site and
for individual pages).
@ -488,19 +477,19 @@ let
default = null;
description = ''
The base URL of the wiki, to be used in constructing feed IDs and RPX
token_urls. Set this if use-feed is 'yes' or authentication-method
token_urls. Set this if useFeed is false or authentication-method
is 'rpx'.
'';
};
absoluteUrls = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
Make wikilinks absolute with respect to the base-url. So, for
example, in a wiki served at the base URL '/wiki', on a page
Sub/Page, the wikilink '[Cactus]()' will produce a link to
'/wiki/Cactus' if absolute-urls is 'yes', and a relative link to
'/wiki/Cactus' if absoluteUrls is true, and a relative link to
'Cactus' (referring to '/wiki/Sub/Cactus') if absolute-urls is 'no'.
'';
};
@ -518,10 +507,10 @@ let
};
pdfExport = mkOption {
type = yesNo;
default = "no";
type = types.bool;
default = false;
description = ''
If yes, PDF will appear in export options. PDF will be created using
If true, PDF will appear in export options. PDF will be created using
pdflatex, which must be installed and in the path. Note that PDF
exports create significant additional server load.
'';
@ -541,10 +530,10 @@ let
};
xssSanitize = mkOption {
type = yesNo;
default = "yes";
type = types.bool;
default = true;
description = ''
If yes, all HTML (including that produced by pandoc) is filtered
If true, all HTML (including that produced by pandoc) is filtered
through xss-sanitize. Set to no only if you trust all of your users.
'';
};
@ -564,7 +553,7 @@ let
default-page-type: ${cfg.defaultPageType}
math: ${cfg.math}
mathjax-script: ${cfg.mathJaxScript}
show-lhs-bird-tracks: ${cfg.showLhsBirdTracks}
show-lhs-bird-tracks: ${toYesNo cfg.showLhsBirdTracks}
templates-dir: ${cfg.templatesDir}
log-file: ${cfg.logFile}
log-level: ${cfg.logLevel}
@ -572,16 +561,16 @@ let
no-delete: ${cfg.noDelete}
no-edit: ${cfg.noEdit}
default-summary: ${cfg.defaultSummary}
table-of-contents: ${cfg.tableOfContents}
plugins: ${cfg.plugins}
use-cache: ${cfg.useCache}
table-of-contents: ${toYesNo cfg.tableOfContents}
plugins: ${concatStringsSep "," cfg.plugins}
use-cache: ${toYesNo cfg.useCache}
cache-dir: ${cfg.cacheDir}
max-upload-size: ${cfg.maxUploadSize}
max-page-size: ${cfg.maxPageSize}
debug-mode: ${cfg.debugMode}
compress-responses: ${cfg.compressResponses}
debug-mode: ${toYesNo cfg.debugMode}
compress-responses: ${toYesNo cfg.compressResponses}
mime-types-file: ${cfg.mimeTypesFile}
use-recaptcha: ${cfg.useReCaptcha}
use-recaptcha: ${toYesNo cfg.useReCaptcha}
recaptcha-private-key: ${toString cfg.reCaptchaPrivateKey}
recaptcha-public-key: ${toString cfg.reCaptchaPublicKey}
access-question: ${cfg.accessQuestion}
@ -590,14 +579,14 @@ let
rpx-key: ${toString cfg.rpxKey}
mail-command: ${cfg.mailCommand}
reset-password-message: ${cfg.resetPasswordMessage}
use-feed: ${cfg.useFeed}
use-feed: ${toYesNo cfg.useFeed}
base-url: ${toString cfg.baseUrl}
absolute-urls: ${cfg.absoluteUrls}
absolute-urls: ${toYesNo cfg.absoluteUrls}
feed-days: ${toString cfg.feedDays}
feed-refresh-time: ${toString cfg.feedRefreshTime}
pdf-export: ${cfg.pdfExport}
pdf-export: ${toYesNo cfg.pdfExport}
pandoc-user-data: ${toString cfg.pandocUserData}
xss-sanitize: ${cfg.xssSanitize}
xss-sanitize: ${toYesNo cfg.xssSanitize}
'';
in
@ -608,6 +597,13 @@ in
config = mkIf cfg.enable {
services.gitit = {
haskellPackages = mkDefault pkgs.haskellPackages;
staticDir = gititShared + "/data/static";
templatesDir = gititShared + "/data/templates";
plugins = [ ];
};
users.extraUsers.gitit = {
group = config.users.extraGroups.gitit.name;
description = "Gitit user";
@ -625,8 +621,16 @@ in
description = "Git and Pandoc Powered Wiki";
after = [ "network.target" ];
wantedBy = [ "multi-user.target" ];
path = with pkgs; [ curl ]
++ optional cfg.pdfExport texLiveFull
++ optional (cfg.repositoryType == "darcs") darcs
++ optional (cfg.repositoryType == "mercurial") mercurial
++ optional (cfg.repositoryType == "git") git;
preStart = with cfg; ''
preStart = let
gm = "gitit@${config.networking.hostName}";
in
with cfg; ''
chown ${uid}:${gid} -R ${homeDir}
for dir in ${repositoryPath} ${staticDir} ${templatesDir} ${cacheDir}
do
@ -638,14 +642,35 @@ in
fi
done
cd ${repositoryPath}
if [ ! -d .git ]
then
${pkgs.git}/bin/git init
${pkgs.git}/bin/git config user.email "gitit@${config.networking.hostName}"
${pkgs.git}/bin/git config user.name "gitit"
chown ${uid}:${gid} -R {repositoryPath}
fi
cd -
${
if repositoryType == "darcs" then
''
if [ ! -d _darcs ]
then
${pkgs.darcs}/bin/darcs initialize
echo "${gm}" > _darcs/prefs/email
''
else if repositoryType == "mercurial" then
''
if [ ! -d .hg ]
then
${pkgs.mercurial}/bin/hg init
cat >> .hg/hgrc <<NAMED
[ui]
username = gitit ${gm}
NAMED
''
else
''
if [ ! -d .git ]
then
${pkgs.git}/bin/git init
${pkgs.git}/bin/git config user.email "${gm}"
${pkgs.git}/bin/git config user.name "gitit"
''}
chown ${uid}:${gid} -R ${repositoryPath}
fi
cd -
'';
serviceConfig = {

View File

@ -78,8 +78,8 @@ in
description = ''
This option defines the maximum number of jobs that Nix will try
to build in parallel. The default is 1. You should generally
set it to the number of CPUs in your system (e.g., 2 on an Athlon
64 X2).
set it to the total number of logical cores in your system (e.g., 16
for two CPUs with 4 cores each and hyper-threading).
'';
};
@ -254,7 +254,7 @@ in
requireSignedBinaryCaches = mkOption {
type = types.bool;
default = false;
default = true;
description = ''
If enabled, Nix will only download binaries from binary
caches if they are cryptographically signed with any of the
@ -309,6 +309,20 @@ in
'';
};
nixPath = mkOption {
type = types.listOf types.str;
default =
[ "/nix/var/nix/profiles/per-user/root/channels/nixos"
"nixos-config=/etc/nixos/configuration.nix"
"/nix/var/nix/profiles/per-user/root/channels"
];
description = ''
The default Nix expression search path, used by the Nix
evaluator to look up paths enclosed in angle brackets
(e.g. <literal>&lt;nixpkgs&gt;</literal>).
'';
};
};
};
@ -378,7 +392,9 @@ in
};
# Set up the environment variables for running Nix.
environment.sessionVariables = cfg.envVars;
environment.sessionVariables = cfg.envVars //
{ NIX_PATH = concatStringsSep ":" cfg.nixPath;
};
environment.extraInit =
''

View File

@ -52,7 +52,7 @@ in
systemd.services.nix-gc =
{ description = "Nix Garbage Collector";
script = "exec ${config.nix.package}/bin/nix-collect-garbage ${cfg.options}";
script = "exec ${config.nix.package}/bin/nix-store --gc ${cfg.options}";
startAt = optionalString cfg.automatic cfg.dates;
};

View File

@ -52,6 +52,7 @@ in
TTYPath = "/dev/${cfg.tty}";
TTYReset = true;
TTYVTDisallocate = true;
WorkingDirectory = "/tmp";
Restart = "always";
};
};

View File

@ -51,12 +51,37 @@ let
# ganglia_port: 8651
'';
diskConfig = pkgs.writeText "disk.yaml" ''
init_config:
instances:
- use_mount: no
'';
networkConfig = pkgs.writeText "network.yaml" ''
init_config:
instances:
# Network check only supports one configured instance
- collect_connection_state: false
excluded_interfaces:
- lo
- lo0
'';
postgresqlConfig = pkgs.writeText "postgres.yaml" cfg.postgresqlConfig;
nginxConfig = pkgs.writeText "nginx.yaml" cfg.nginxConfig;
mongoConfig = pkgs.writeText "mongo.yaml" cfg.mongoConfig;
etcfiles =
[ { source = ddConf;
target = "dd-agent/datadog.conf";
}
{ source = diskConfig;
target = "dd-agent/conf.d/disk.yaml";
}
{ source = networkConfig;
target = "dd-agent/conf.d/network.yaml";
} ] ++
(optional (cfg.postgresqlConfig != null)
{ source = postgresqlConfig;
@ -65,6 +90,10 @@ let
(optional (cfg.nginxConfig != null)
{ source = nginxConfig;
target = "dd-agent/conf.d/nginx.yaml";
}) ++
(optional (cfg.mongoConfig != null)
{ source = mongoConfig;
target = "dd-agent/conf.d/mongo.yaml";
});
in {
@ -106,6 +135,12 @@ in {
default = null;
type = types.uniq (types.nullOr types.string);
};
mongoConfig = mkOption {
description = "MongoDB integration configuration";
default = null;
type = types.uniq (types.nullOr types.string);
};
};
config = mkIf cfg.enable {
@ -123,7 +158,7 @@ in {
systemd.services.dd-agent = {
description = "Datadog agent monitor";
path = [ pkgs."dd-agent" pkgs.python pkgs.sysstat pkgs.procps];
path = [ pkgs."dd-agent" pkgs.python pkgs.sysstat pkgs.procps ];
wantedBy = [ "multi-user.target" ];
serviceConfig = {
ExecStart = "${pkgs.dd-agent}/bin/dd-agent foreground";
@ -132,7 +167,7 @@ in {
Restart = "always";
RestartSec = 2;
};
restartTriggers = [ pkgs.dd-agent ddConf postgresqlConfig nginxConfig ];
restartTriggers = [ pkgs.dd-agent ddConf diskConfig networkConfig postgresqlConfig nginxConfig mongoConfig ];
};
systemd.services.dogstatsd = {
@ -149,7 +184,7 @@ in {
RestartSec = 2;
};
environment.SSL_CERT_FILE = "/etc/ssl/certs/ca-bundle.crt";
restartTriggers = [ pkgs.dd-agent ddConf postgresqlConfig nginxConfig ];
restartTriggers = [ pkgs.dd-agent ddConf diskConfig networkConfig postgresqlConfig nginxConfig mongoConfig ];
};
environment.etc = etcfiles;

View File

@ -200,13 +200,13 @@ in {
staticRootPath = mkOption {
description = "Root path for static assets.";
default = "${cfg.package}/share/go/src/github.com/grafana/grafana/public";
default = "${cfg.package.out}/share/go/src/github.com/grafana/grafana/public";
type = types.str;
};
package = mkOption {
description = "Package to use.";
default = pkgs.goPackages.grafana;
default = pkgs.grafana-backend;
type = types.package;
};
@ -319,7 +319,7 @@ in {
wantedBy = ["multi-user.target"];
after = ["networking.target"];
serviceConfig = {
ExecStart = "${cfg.package}/bin/grafana --config ${cfgFile} web";
ExecStart = "${cfg.package-backend}/bin/grafana --config ${cfgFile} web";
WorkingDirectory = cfg.dataDir;
User = "grafana";
};

View File

@ -20,9 +20,11 @@ let
cfg.collectors)}
'';
cmdLineOpts = concatStringsSep " " (
[ "-h=${cfg.bosunHost}" "-c=${collectors}" ] ++ cfg.extraOpts
);
conf = pkgs.writeText "scollector.toml" ''
Host = "${cfg.bosunHost}"
ColDir = "${collectors}"
${cfg.extraConfig}
'';
in {
@ -92,6 +94,14 @@ in {
'';
};
extraConfig = mkOption {
type = types.lines;
default = "";
description = ''
Extra scollector configuration added to the end of scollector.toml
'';
};
};
};
@ -108,7 +118,7 @@ in {
PermissionsStartOnly = true;
User = cfg.user;
Group = cfg.group;
ExecStart = "${cfg.package}/bin/scollector ${cmdLineOpts}";
ExecStart = "${cfg.package}/bin/scollector -conf=${conf} ${lib.concatStringsSep " " cfg.extraOpts}";
};
};

View File

@ -4,8 +4,66 @@ with lib;
let
host = config.networking.hostName or "unknown"
+ optionalString (config.networking.domain != null) ".${config.networking.domain}";
cfg = config.services.smartd;
nm = cfg.notifications.mail;
nw = cfg.notifications.wall;
nx = cfg.notifications.x11;
smartdNotify = pkgs.writeScript "smartd-notify.sh" ''
#! ${pkgs.stdenv.shell}
${optionalString nm.enable ''
{
cat << EOF
From: smartd on ${host} <root>
To: undisclosed-recipients:;
Subject: SMART error on $SMARTD_DEVICESTRING: $SMARTD_FAILTYPE
$SMARTD_FULLMESSAGE
EOF
${pkgs.smartmontools}/sbin/smartctl -a -d "$SMARTD_DEVICETYPE" "$SMARTD_DEVICE"
} | ${nm.mailer} -i "${nm.recipient}"
''}
${optionalString nw.enable ''
{
cat << EOF
Problem detected with disk: $SMARTD_DEVICESTRING
Warning message from smartd is:
$SMARTD_MESSAGE
EOF
} | ${pkgs.utillinux}/bin/wall 2>/dev/null
''}
${optionalString nx.enable ''
export DISPLAY=${nx.display}
{
cat << EOF
Problem detected with disk: $SMARTD_DEVICESTRING
Warning message from smartd is:
$SMARTD_FULLMESSAGE
EOF
} | ${pkgs.xorg.xmessage}/bin/xmessage -file - 2>/dev/null &
''}
'';
notifyOpts = optionalString (nm.enable || nw.enable || nx.enable)
("-m <nomailer> -M exec ${smartdNotify} " + optionalString cfg.notifications.test "-M test ");
smartdConf = pkgs.writeText "smartd.conf" ''
# Autogenerated smartd startup config file
DEFAULT ${notifyOpts}${cfg.defaults.monitored}
${concatMapStringsSep "\n" (d: "${d.device} ${d.options}") cfg.devices}
${optionalString cfg.autodetect
"DEVICESCAN ${notifyOpts}${cfg.defaults.autodetected}"}
'';
smartdOpts = { name, ... }: {
options = {
@ -22,34 +80,11 @@ let
type = types.separatedString " ";
description = "Options that determine how smartd monitors the device.";
};
};
};
smartdMail = pkgs.writeScript "smartdmail.sh" ''
#! ${pkgs.stdenv.shell}
TMPNAM=/tmp/smartd-message.$$.tmp
if test -n "$SMARTD_ADDRESS"; then
echo >"$TMPNAM" "From: smartd <root>"
echo >>"$TMPNAM" 'To: undisclosed-recipients:;'
echo >>"$TMPNAM" "Subject: $SMARTD_SUBJECT"
echo >>"$TMPNAM"
echo >>"$TMPNAM" "Failure on $SMARTD_DEVICESTRING: $SMARTD_FAILTYPE"
echo >>"$TMPNAM"
cat >>"$TMPNAM"
${pkgs.smartmontools}/sbin/smartctl >>"$TMPNAM" -a -d "$SMARTD_DEVICETYPE" "$SMARTD_DEVICE"
/var/setuid-wrappers/sendmail <"$TMPNAM" -f "$SENDER" -i "$SMARTD_ADDRESS"
fi
'';
smartdConf = pkgs.writeText "smartd.conf" (concatMapStrings (device:
''
${device.device} -a -m root -M exec ${smartdMail} ${device.options} ${cfg.deviceOpts}
''
) cfg.devices);
smartdFlags = if (cfg.devices == []) then "" else "--configfile=${smartdConf}";
in
{
@ -59,26 +94,104 @@ in
services.smartd = {
enable = mkOption {
default = false;
enable = mkEnableOption "smartd daemon from <literal>smartmontools</literal> package";
autodetect = mkOption {
default = true;
type = types.bool;
example = true;
description = ''
Run smartd from the smartmontools package. Note that e-mail
notifications will not be enabled unless you configure the list of
devices with <varname>services.smartd.devices</varname> as well.
Whenever smartd should monitor all devices connected to the
machine at the time it's being started (the default).
Set to false to monitor the devices listed in
<option>services.smartd.devices</option> only.
'';
};
deviceOpts = mkOption {
default = "";
type = types.string;
example = "-o on -s (S/../.././02|L/../../7/04)";
description = ''
Additional options for each device that is monitored. The example
turns on SMART Automatic Offline Testing on startup, and schedules short
self-tests daily, and long self-tests weekly.
'';
notifications = {
mail = {
enable = mkOption {
default = config.services.mail.sendmailSetuidWrapper != null;
type = types.bool;
description = "Whenever to send e-mail notifications.";
};
recipient = mkOption {
default = "root";
type = types.string;
description = "Recipient of the notification messages.";
};
mailer = mkOption {
default = "/var/setuid-wrappers/sendmail";
type = types.path;
description = ''
Sendmail-compatible binary to be used to send the messages.
You should probably enable
<option>services.postfix</option> or some other MTA for
this to work.
'';
};
};
wall = {
enable = mkOption {
default = true;
type = types.bool;
description = "Whenever to send wall notifications to all users.";
};
};
x11 = {
enable = mkOption {
default = config.services.xserver.enable;
type = types.bool;
description = "Whenever to send X11 xmessage notifications.";
};
display = mkOption {
default = ":${toString config.services.xserver.display}";
type = types.string;
description = "DISPLAY to send X11 notifications to.";
};
};
test = mkOption {
default = false;
type = types.bool;
description = "Whenever to send a test notification on startup.";
};
};
defaults = {
monitored = mkOption {
default = "-a";
type = types.separatedString " ";
example = "-a -o on -s (S/../.././02|L/../../7/04)";
description = ''
Common default options for explicitly monitored (listed in
<option>services.smartd.devices</option>) devices.
The default value turns on monitoring of all the things (see
<literal>man 5 smartd.conf</literal>).
The example also turns on SMART Automatic Offline Testing on
startup, and schedules short self-tests daily, and long
self-tests weekly.
'';
};
autodetected = mkOption {
default = cfg.defaults.monitored;
type = types.separatedString " ";
description = ''
Like <option>services.smartd.defaults.monitored</option>, but for the
autodetected devices.
'';
};
};
devices = mkOption {
@ -86,14 +199,9 @@ in
example = [ { device = "/dev/sda"; } { device = "/dev/sdb"; options = "-d sat"; } ];
type = types.listOf types.optionSet;
options = [ smartdOpts ];
description = ''
List of devices to monitor. By default -- if this list is empty --,
smartd will monitor all devices connected to the machine at the time
it's being run. Configuring this option has the added benefit of
enabling e-mail notifications to "root" every time smartd detects an
error.
'';
};
description = "List of devices to monitor.";
};
};
};
@ -103,12 +211,19 @@ in
config = mkIf cfg.enable {
assertions = [ {
assertion = cfg.autodetect || cfg.devices != [];
message = "smartd can't run with both disabled autodetect and an empty list of devices to monitor.";
} ];
systemd.services.smartd = {
description = "S.M.A.R.T. Daemon";
wantedBy = [ "multi-user.target" ];
serviceConfig.ExecStart = "${pkgs.smartmontools}/sbin/smartd --no-fork ${smartdFlags}";
path = [ pkgs.nettools ]; # for hostname and dnsdomanname calls in smartd
serviceConfig.ExecStart = "${pkgs.smartmontools}/sbin/smartd --no-fork --configfile=${smartdConf}";
};
};

View File

@ -88,10 +88,7 @@ in
environment.systemPackages = [ pkgs.nfs-utils ];
environment.etc = singleton
{ source = exports;
target = "exports";
};
environment.etc.exports.source = exports;
boot.kernelModules = [ "nfsd" ];

View File

@ -1,53 +1,53 @@
{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.services.copy-com;
in
{
options = {
services.copy-com = {
enable = mkOption {
default = false;
description = "
Enable the copy.com client.
The first time copy.com is run, it needs to be configured. Before enabling run
copy_console manually.
";
};
user = mkOption {
description = "The user for which copy should run.";
};
debug = mkOption {
default = false;
description = "Output more.";
};
};
};
config = mkIf cfg.enable {
environment.systemPackages = [ pkgs.postfix ];
systemd.services."copy-com-${cfg.user}" = {
description = "Copy.com Client";
after = [ "network.target" "local-fs.target" ];
wantedBy = [ "multi-user.target" ];
serviceConfig = {
ExecStart = "${pkgs.copy-com}/bin/copy_console ${if cfg.debug then "-consoleOutput -debugToConsole=dirwatch,path-watch,csm_path,csm -debug -console" else ""}";
User = "${cfg.user}";
};
};
};
}
{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.services.copy-com;
in
{
options = {
services.copy-com = {
enable = mkOption {
default = false;
description = "
Enable the Copy.com client.
NOTE: before enabling the client for the first time, it must be
configured by first running CopyConsole (command line) or CopyAgent
(graphical) as the appropriate user.
";
};
user = mkOption {
description = "The user for which the Copy.com client should be run.";
};
debug = mkOption {
default = false;
description = "Output more (debugging) messages to the console.";
};
};
};
config = mkIf cfg.enable {
environment.systemPackages = [ pkgs.postfix ];
systemd.services."copy-com-${cfg.user}" = {
description = "Copy.com client";
after = [ "network.target" "local-fs.target" ];
wantedBy = [ "multi-user.target" ];
serviceConfig = {
ExecStart = "${pkgs.copy-com}/bin/CopyConsole ${if cfg.debug then "-consoleOutput -debugToConsole=dirwatch,path-watch,csm_path,csm -debug -console" else ""}";
User = "${cfg.user}";
};
};
};
}

View File

@ -98,6 +98,7 @@ in
ExecStart = "${dnsmasq}/bin/dnsmasq -k --enable-dbus --user=dnsmasq -C ${dnsmasqConf}";
ExecReload = "${dnsmasq}/bin/kill -HUP $MAINPID";
};
restartTriggers = [ config.environment.etc.hosts.source ];
};
};

View File

@ -0,0 +1,60 @@
{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.networking.fan;
modprobe = "${config.system.sbin.modprobe}/sbin/modprobe";
in
{
###### interface
options = {
networking.fan = {
enable = mkEnableOption "FAN Networking";
};
};
###### implementation
config = mkIf cfg.enable {
environment.systemPackages = [ pkgs.fanctl ];
systemd.services.fan = {
description = "FAN Networking";
wantedBy = [ "multi-user.target" ];
after = [ "network-online.target" ];
before = [ "docker.service" ];
restartIfChanged = false;
preStart = ''
if [ ! -f /proc/sys/net/fan/version ]; then
${modprobe} ipip
if [ ! -f /proc/sys/net/fan/version ]; then
echo "The Fan Networking patches have not been applied to this kernel!" 1>&2
exit 1
fi
fi
mkdir -p /var/lib/fan-networking
'';
serviceConfig = {
Type = "oneshot";
RemainAfterExit = true;
ExecStart = "${pkgs.fanctl}/bin/fanctl up -a";
ExecStop = "${pkgs.fanctl}/bin/fanctl down -a";
};
};
};
}

View File

@ -420,6 +420,16 @@ in
'';
};
networking.firewall.extraPackages = mkOption {
default = [ ];
example = [ pkgs.ipset ];
description =
''
Additional packages to be included in the environment of the system
as well as the path of networking.firewall.extraCommands.
'';
};
networking.firewall.extraStopCommands = mkOption {
type = types.lines;
default = "";
@ -443,7 +453,7 @@ in
networking.firewall.trustedInterfaces = [ "lo" ];
environment.systemPackages = [ pkgs.iptables pkgs.ipset ];
environment.systemPackages = [ pkgs.iptables ] ++ cfg.extraPackages;
boot.kernelModules = map (x: "nf_conntrack_${x}") cfg.connectionTrackingModules;
boot.extraModprobeConfig = optionalString (!cfg.autoLoadConntrackHelpers) ''
@ -462,7 +472,7 @@ in
before = [ "network-pre.target" ];
after = [ "systemd-modules-load.service" ];
path = [ pkgs.iptables pkgs.ipset ];
path = [ pkgs.iptables ] ++ cfg.extraPackages;
# FIXME: this module may also try to load kernel modules, but
# containers don't have CAP_SYS_MODULE. So the host system had

Some files were not shown because too many files have changed in this diff Show More