makes sure that program listing tags are separated from their contents
by exactly a newline character. this makes the markdown translation
easier to verify (since no new newlines need to be inserted), and
there's no rendering difference anyway.
markdown cannot represent those links. remove them all now instead of in
each chapter conversion to keep the diff for each chapter small and more
understandable.
The `freeformType` of `settings.publicinbox` in this module prevented
users from setting settings on the `publicinbox` section itself (which
is necessary for making e.g. IMAP work correctly), and only allowed
configuration of nested per-inbox sections.
In general I believe that these overly specific types which are
traditional in NixOS, and this kind of config generation, are a huge
footgun. This commit is the least invasive change that makes the
module work correctly.
By settings User= to the actual Exim user, systemd will ensure that the
credentials directory will have the correct ownership, allowing users to
utilize LoadCredential=. Exim still gets started as root (and drops
privileges) to preserve the previous behavior.
Previously, the NixOS test often failed as the copied config file is not
overwriteable. In actual setups, the restart interval is much bigger, such that
systemd-tmpfiles will correct the permissions inbetween.
On spectrum-os.org, mailman-web is run at /lists. With this change,
it's possible for us to switch from a custom uWSGI configuration to
the one now built in to the Mailman module.
When switching between different NixOS configurations (with and
without nullmailer and other services), it can happen that the UID of
the nullmailer user changes. When it happens, the nullmailer service
happily starts, but the user cannot send any email, because the
sendmail wrapper doesn't have permission to write them to the queue.
This commit prevents that. Instead of creating the directories by the
nullmailer user, which doesn't have permissions to change ownership,
we now create them by the systemd-tmpfiles, which has sufficient
permissions to adjust ownership.
most of these are hidden because they're either part of a submodule that
doesn't have its type rendered (eg because the submodule type is used in
an either type) or because they are explicitly hidden. some of them are
merely hidden from nix-doc-munge by how their option is put together.
conversions were done using https://github.com/pennae/nix-doc-munge
using (probably) rev f34e145 running
nix-doc-munge nixos/**/*.nix
nix-doc-munge --import nixos/**/*.nix
the tool ensures that only changes that could affect the generated
manual *but don't* are committed, other changes require manual review
and are discarded.
this mostly means marking options that use markdown already
appropriately and making a few adjustments so they still render
correctly. notable for nftables we have to transform the md links
because the manpage would not render them correctly otherwise.
using regular strings works well for docbook because docbook is not as
whitespace-sensitive as markdown. markdown would render all of these as
code blocks when given the chance.
now nix-doc-munge will not introduce whitespace changes when it replaces
manpage references with the MD equivalent.
no change to the manpage, changes to the HTML manual are whitespace only.
make (almost) all links appear on only a single line, with no
unnecessary whitespace, using double quotes for attributes. this lets us
automatically convert them to markdown easily.
the few remaining links are extremely long link in a gnome module, we'll
come back to those at a later date.
we can't embed syntactic annotations of this kind in markdown code
blocks without yet another extension. replaceable is rare enough to make
this not much worth it, so we'll go with «thing» instead. the module
system already uses this format for its placeholder names in attrsOf
paths.
markdown can't represent the difference without another extension and
both the html manual and the manpage render them the same, so keeping the
distinction is not very useful on its own. with the distinction removed
we can automatically convert many options that use <code> tags to markdown.
the manpage remains unchanged, html manual does not render
differently (but class names on code tags do change from "code" to "literal").
the conversion procedure is simple:
- find all things that look like options, ie calls to either `mkOption`
or `lib.mkOption` that take an attrset. remember the attrset as the
option
- for all options, find a `description` attribute who's value is not a
call to `mdDoc` or `lib.mdDoc`
- textually convert the entire value of the attribute to MD with a few
simple regexes (the set from mdize-module.sh)
- if the change produced a change in the manual output, discard
- if the change kept the manual unchanged, add some text to the
description to make sure we've actually found an option. if the
manual changes this time, keep the converted description
this procedure converts 80% of nixos options to markdown. around 2000
options remain to be inspected, but most of those fail the "does not
change the manual output check": currently the MD conversion process
does not faithfully convert docbook tags like <code> and <package>, so
any option using such tags will not be converted at all.
Otherwise, it wouldn't get restarted when a new system configuration
was activatad, so the Postfix configuration wouldn't be updated.
Fixes: fb2fa1b50f ("nixos/postfix: pull setup into its own unit")
* Removed unused `.package`-option.
* Added explicit postgresql support.
* Create a new meta-package for mailman to make sure each component has
the **same** python and packages can be downgraded if needed (e.g.
psycopg2 or sqlalchemy) without interfering with `pythonPackages` in any way.
* Document why certain python overrides are needed.
Closes#170035Closes#158424
Add support for enabling confinement
but does not enable it by default yet
because so far no module within NixOS uses confinement
hence that would set a precedent.
On first run, Postfix will refuse to start if it's started before
Mailman is up, because it'll try to read the map files generated
Mailman the first time it's started, and they won't exist yet. To fix
this, make sure Postfix isn't started until after Mailman is up if
they're both activated at the same time.
Consider a service that generates postfix lookup tables with
postmap(1), like Mailman. It needs the Postfix configuration file to
exist, but Postfix qmgr needs all the lookup tables its configured
with to exist before it starts. So the service that runs postmap
needs to run after the Postfix configuration and directory structure
is generated, but before Postfix itself is started. To enable this,
we split Postfix into two units: a oneshot unit that sets up the
configuration, and a longrun unit that supervises the Postfix
daemons. The postmap services can then be inserted in between these
two units.
* nixos/opensmtpd: Add missing brackets in config
Without this commit, you end up missing the sendmail suid wrapper,
because the "program" attribute would not override the right thing.
* Update nixos/modules/services/mail/opensmtpd.nix
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
Nullmailer expects that this directory exists (see
073f4e9c5d/doc/nullmailer-send.8 (L185)).
When it doesn't and an email cannot be sent due to a permanent failure
or has been in the queue longer than queuelifetime (7 days), message
"Can't rename file: No such file or directory" starts appearing in the
log and nullmailer never sends "Could not send message" notification.
This means that the user may never learn that his email was not
delivered.
Without this change, mailman-settings.service is not guaranteed to
complete before dependent services. This can lead to various errors
like:
mailman-web-setup.service: Changing to the requested working directory failed: No such file or directory
Postfix has started outputting an error on startup that it can't parse
the compatibility level 9999.
Instead, just set the compatibility level to be identical to the current
version, which seems to be the (new) intent for the compatibility level.
An empty list results in no CapabilityBoundingSet at all, an empty
string however will set `CapabilityBoundingSet=`, which represents a
closed set.
Related: #120617
An empty list results in no CapabilityBoundingSet at all, an empty
string however will set `CapabilityBoundingSet=`, which represents a
closed set.
Related: #120617
With the config suggested in the module docs both Mailman core and
Hyperkitty are running, but Mailman core can not connect to Hyperkitty,
since the default hyperkitty.baseUrl is not set up by the module.
This adds a http listener to the uwsgi config and changes the default
hyperkitty.baseUrl to connect to this http listener.
* Make it clearer what code comments apply to
* Fix the state directory (this was changed in the update)
* Add m1cr0man as a maintaner
Co-authored-by: Lucas Savva <lucas@m1cr0man.com>
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
The NixOS 21.03 release has been delayed to 21.05. See NixOS/rfcs#80.
There are two instances of 21.03 which have been left as is, since they
are in stateVersion comparisons. This will ensure that existing user
configurations which refer to 21.03 will continue to work.
For sa-update we care about two successful codes:
* 1 -> no updates available: exit successfully
* 0 -> updates have been installed: run sa-compile and pass
through its return code
sa-compile speeds up processing the rules by compiling them from Perl to
C. This needs to be run after every update and is saved in the local
state directory by Perl and SpamAssassin version.
Let systemd create SpamAssassin's state directory and populate it using the
regular updater service. Depend on the updater service on boot but do not
propagate failure to the main service.
spamd's commands to start and reload the service are still executed as
root but user/group are set to properly chown the state directory to the
target user. spamd drops privileges itself for its runner children but
preserves root on the main daemon (to listen and re-exec).
sa-update currently runs as part of the pre-start script of spamd. The
network is not guaranteed to be online at that point and even if we
were to depend on that, it makes the bootup brittle, as there is a
reliance on SpamAssassin's update server as a startup dependency on
boot.
Refactor the setup to move the pre-start script into its own unit.
This allows to perform the setup task only once. Continuous updates
are already done by sa-update.service triggered by sa-update.timer.
Only run sa-update in case /var/lib/spamassassin is empty.
While we are on it, let sa-update.service depend on the network being
online.
Now that smtp_tls_security_level is using mkDefault, and therefore can
be overridden, there's no need for an option for overriding it to a
specific value.
I run Postfix on my workstation as a smarthost, where it only ever
talks to my SMTP server. Because I know it'll only ever connect to
this server, and because I know this server supports TLS, I'd like to
set smtp_tls_security_level to "encrypt" so Postfix won't fall back to
an unencrypted connection.
b478e0043c removed every other instance of uwsgi.service and
httpd.service from Mailman before and requiredBy lists. This one
looks like it was just missed, since I can't see a reason to keep it
but remove the others.
Fixes: b478e0043c ("nixos/mailman: refactor")
Exim spawns a new queue runner every n minutes as configured by the
argument to -q; up to queue_run_max can be active at the same time.
Spawning a queue runner only every 30 mins means that a message that
failed delivery on the first attempt (e.g. due to greylisting) will only
be retried 30 minutes later.
A queue runner will immediately exit if the queue is empty, so it is
more a function on how quickly Exim will scale to mail load and how
quickly it will retry than something that is taxing on an otherwise
empty system.
Mailman can now work with MTAs other than Postfix. You'll have to configure
it yourself using the options in `services.mailman.settings.mta`.
This addition is reflected in the release notes for 21.03.
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
`sslCACert` was used for trust store of client and server certificates. Since `smtpd_tls_ask_ccert` defaults to no the setup of `smtpd_tls_CApath` was removed.
>By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CApath should remain empty.
see http://www.postfix.org/postconf.5.html#smtpd_tls_CAfile
