Riak have been updated a lot since the version 2.2 (now 3.0.10) but
has seen no updated to the package. This is at this point
a problem forcing us to maintain old versions of erlang.
We would be happy to re accept a newer version of Riak if someone want
to spend the time to set it up.
On one of the two machines I have running openldap, openldap failed to start due to a "timeout". Increasing the allowed startup delay didn't help.
I noticed the following in logs:
```
openldap.service: Got notification message from PID 5224, but reception only permitted for main PID 5223
```
It turns out that on this machine at least, openldap apparently sends the notification from a non-main process, which means that we need this NotifyAccess setting for systemd to record that it successfully started. Without it, after 30 seconds systemd kills the process because it didn't receive the sd_notify call.
Somehow the other machine I have on nixos running ldap works fine even without this, but I could not figure out what changes the behavior.
Given that AFAIU NotifyAccess still restricts to "from the cgroup of the service", I think this change should be safe.
OpenLDAP since version 2.5.4¹ supports sd_notify, so we should make use
of it.
Also updates the unit description and documentation with the values
upstream provides.
Starts slapd only after reaching `network-online.target`, which ensures
binding to specific ip addresses is possible, since `network.target`
only guarantees interfaces exist, but not that addressing is finished.
[1] https://bugs.openldap.org/show_bug.cgi?id=8707
It breaks something inside of influxdb2, which results in flurry of errors like these:
> ts=2021-12-21T18:19:35.513910Z lvl=info msg="Write failed" log_id=0YZYwvV0000 service=storage-engine service=write shard=50 error="[shard 50] unlinkat ./L1-00000055.tsi: read-only file system"
I believe this is somehow caused by a mount namespace that systemd creates for
the service, but I didn't investigate this deeper.
* It's IMHO a slight overkill to deploy an additional container even if
it's never supposed to be running. Also, the currently suggested
approach wouldn't use the default state-directory for the new version.
* Explain the structure of the state-directories and where the
version-numbers are actually coming from.
* Mention `./analyze_new_cluster.sh` & `./delete_old_cluster.sh`.
unfortunately we don't have a good way to represent defaults that
reference other values of the current submodule, so we just use the
relative path of the referenced value and assume that the submodule was
declared as `rec`.
instead of keeping a defaultConfig value around, set that value as the
default of the option and explicitly use the option default instead.
this also allows us to write a defaultText that makes sense and is in
proximity to the definition of the default.
adds defaultText for all options that use `cfg.*` values in their
defaults, but only for interpolations with no extra processing (other
than toString where necessary)
This fixes:
```
systemd[1]: Started VictoriaMetrics time series database.
victoria-metrics[379550]: 2021-08-04T19:33:39.833Z panic VictoriaMetrics/lib/storage/partition.go:954 FATAL: unrecoverable error when merging small parts in the partition "/var/lib/victoriametrics/data/small/2021_08": cannot open source part for merging: cannot open metaindex file in stream mode: cannot open file "/var/lib/victoriametrics/data/small/2021_08/1228_1228_20210804184120.712_20210804184121.899_16982E83CD7A763A/metaindex.bin": open /var/lib/victoriametrics/data/small/2021_08/1228_1228_20210804184120.712_20210804184121.899_16982E83CD7A763A/metaindex.bin: too many open files
victoria-metrics[379550]: panic: FATAL: unrecoverable error when merging small parts in the partition "/var/lib/victoriametrics/data/small/2021_08": cannot open source part for merging: cannot open metaindex file in stream mode: cannot open file "/var/lib/victoriametrics/data/small/2021_08/1228_1228_20210804184120.712_20210804184121.899_16982E83CD7A763A/metaindex.bin": open /var/lib/victoriametrics/data/small/2021_08/1228_1228_20210804184120.712_20210804184121.899_16982E83CD7A763A/metaindex.bin: too many open files
victoria-metrics[379550]: goroutine 629 [running]:
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger.logMessage(0xbb3ea1, 0x5, 0xc001113800, 0x1e7, 0x4)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger/logger.go:270 +0xc69
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger.logLevelSkipframes(0x1, 0xbb3ea1, 0x5, 0xbe3f8b, 0x4b, 0xc000bb3f88, 0x2, 0x2)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger/logger.go:138 +0xd1
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger.logLevel(...)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger/logger.go:130
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger.Panicf(...)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/logger/logger.go:126
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/storage.(*partition).smallPartsMerger(0xc0014d7980)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/storage/partition.go:954 +0x145
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/storage.(*partition).startMergeWorkers.func1(0xc0014d7980)
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/storage/partition.go:933 +0x2b
victoria-metrics[379550]: created by github.com/VictoriaMetrics/VictoriaMetrics/lib/storage.(*partition).startMergeWorkers
victoria-metrics[379550]: github.com/VictoriaMetrics/VictoriaMetrics/lib/storage/partition.go:932 +0x6c
systemd[1]: victoriametrics.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
systemd[1]: victoriametrics.service: Failed with result 'exit-code'.
systemd[1]: victoriametrics.service: Consumed 587ms CPU time, received 6.5K IP traffic, sent 1.7K IP traffic.
systemd[1]: victoriametrics.service: Scheduled restart job, restart counter is at 2064.
systemd[1]: Stopped VictoriaMetrics time series database.
systemd[1]: victoriametrics.service: Consumed 587ms CPU time, received 6.5K IP traffic, sent 1.7K IP traffic.
systemd[1]: Starting VictoriaMetrics time series database...
```
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
Although the quotes here aren't necessary, they may be if a user cargo-cults this example with a database name with hyphens (or other "unusual" characters).
The old slapd.conf is deprecated. Replace with slapd.d, and use this
opportunity to write some structured settings.
Incidentally, this fixes the fact that openldap is reported up before
any checks have completed, by using forking mode.
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
* nixos/postgresql: fix inaccurate docs for authentication
We actually use peer authentication, then md5 based authentication.
trust is not used.
* Use a link for mkForce docs
Co-authored-by: aszlig <aszlig@redmoonstudios.org>
Co-authored-by: lf- <lf-@users.noreply.github.com>
Co-authored-by: aszlig <aszlig@redmoonstudios.org>
The missing () caused parts of the escripts to be added to the
ExecStartPost line instead of inside the script.
This caused postgresql start to fail under certain conditions.
In certain cases, for example when custom OpenLDAP modules are
compiled into the binary, users may want to override the package used
for OpenLDAP.
This is especially common in setups where LDAP is the primary
authentication source, as good password hashing mechanisms need to be
enabled as extra modules.
The 6.0 changelog notes that systemd support was rewritten. The effects
of that seem to be twofold:
* Redis will silently fail to sd_notify if not built with libsystemd,
breaking our unit configuration.
* It also appears to misbehave if told to daemonize when running under
systemd -- note that upstream's sample unit configuration does not
daemonize:
https://github.com/antirez/redis/blob/unstable/utils/systemd-redis_server.service
Currently, sudo doesn't work in a NixOS container running inside a Nix
build, because Nix's seccomp filter doesn't allow setuid programs. In
any case, runuser is a bit lower-overhead than sudo.
By default, postgres prefixes each log line with a timestamp. On NixOS
logs are written to journal anyway, so they include an external
timestamp, so the timestamp ends up being printed twice, which clutters
the log.
* Add a module option to change the log prefix.
* Set it to upstream default sans timestamp.
This seems to have worked in 15f105d41f (5
months ago) but broke somewhere in the meantime.
The current module doesn't seem to be underdocumented and might need a
serious refactor. It requires quite some hacks to get it to work (see
https://github.com/NixOS/nixpkgs/issues/86305#issuecomment-621129942),
or how the ldap.nix test used systemd.services.openldap.preStart and
made quite some assumptions on internals.
Mic92 agreed on being added as a maintainer for the module, as he uses
it a lot and can possibly fix eventual breakages. For the most basic
startup breakages, the remaining openldap.nix test might suffice.
slapd does only print the error and not the line number.
Sometimes it is not even clear that it fails to start
due to an incorrect configuration file.
Example output of slaptest:
5e1b2179 /nix/store/gbn2v319d4qgw851sg41mcmjm5dpn39i-slapd.conf: line 134 objectClass: Missing closing parenthesis before end of input
ObjectClassDescription = "(" whsp
numericoid whsp ; ObjectClass identifier
[ "NAME" qdescrs ]
[ "DESC" qdstring ]
[ "OBSOLETE" whsp ]
[ "SUP" oids ] ; Superior ObjectClasses
[ ( "ABSTRACT" / "STRUCTURAL" / "AUXILIARY" ) whsp ]
; default structural
[ "MUST" oids ] ; AttributeTypes
[ "MAY" oids ] ; AttributeTypes
whsp ")"
slaptest: bad configuration file!
A centralized list for these renames is not good because:
- It breaks disabledModules for modules that have a rename defined
- Adding/removing renames for a module means having to find them in the
central file
- Merge conflicts due to multiple people editing the central file
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
