nixpkgs/nixos/modules/services/networking/sslh.nix
2022-11-10 09:30:00 +01:00

169 lines
6.7 KiB
Nix

{ config, lib, pkgs, ... }:
with lib;
let
cfg = config.services.sslh;
user = "sslh";
configFile = pkgs.writeText "sslh.conf" ''
verbose: ${boolToString cfg.verbose};
foreground: true;
inetd: false;
numeric: false;
transparent: ${boolToString cfg.transparent};
timeout: "${toString cfg.timeout}";
listen:
(
${
concatMapStringsSep ",\n"
(addr: ''{ host: "${addr}"; port: "${toString cfg.port}"; }'')
cfg.listenAddresses
}
);
${cfg.appendConfig}
'';
defaultAppendConfig = ''
protocols:
(
{ name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
{ name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
{ name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
{ name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
{ name: "tls"; host: "localhost"; port: "443"; probe: "builtin"; },
{ name: "anyprot"; host: "localhost"; port: "443"; probe: "builtin"; }
);
'';
in
{
imports = [
(mkRenamedOptionModule [ "services" "sslh" "listenAddress" ] [ "services" "sslh" "listenAddresses" ])
];
options = {
services.sslh = {
enable = mkEnableOption (lib.mdDoc "sslh");
verbose = mkOption {
type = types.bool;
default = false;
description = lib.mdDoc "Verbose logs.";
};
timeout = mkOption {
type = types.int;
default = 2;
description = lib.mdDoc "Timeout in seconds.";
};
transparent = mkOption {
type = types.bool;
default = false;
description = lib.mdDoc "Will the services behind sslh (Apache, sshd and so on) see the external IP and ports as if the external world connected directly to them";
};
listenAddresses = mkOption {
type = types.coercedTo types.str singleton (types.listOf types.str);
default = [ "0.0.0.0" "[::]" ];
description = lib.mdDoc "Listening addresses or hostnames.";
};
port = mkOption {
type = types.port;
default = 443;
description = lib.mdDoc "Listening port.";
};
appendConfig = mkOption {
type = types.str;
default = defaultAppendConfig;
description = lib.mdDoc "Verbatim configuration file.";
};
};
};
config = mkMerge [
(mkIf cfg.enable {
systemd.services.sslh = {
description = "Applicative Protocol Multiplexer (e.g. share SSH and HTTPS on the same port)";
after = [ "network.target" ];
wantedBy = [ "multi-user.target" ];
serviceConfig = {
DynamicUser = true;
User = "sslh";
PermissionsStartOnly = true;
Restart = "always";
RestartSec = "1s";
ExecStart = "${pkgs.sslh}/bin/sslh -F${configFile}";
KillMode = "process";
AmbientCapabilities = "CAP_NET_BIND_SERVICE CAP_NET_ADMIN CAP_SETGID CAP_SETUID";
PrivateTmp = true;
PrivateDevices = true;
ProtectSystem = "full";
ProtectHome = true;
};
};
})
# code from https://github.com/yrutschle/sslh#transparent-proxy-support
# the only difference is using iptables mark 0x2 instead of 0x1 to avoid conflicts with nixos/nat module
(mkIf (cfg.enable && cfg.transparent) {
# Set route_localnet = 1 on all interfaces so that ssl can use "localhost" as destination
boot.kernel.sysctl."net.ipv4.conf.default.route_localnet" = 1;
boot.kernel.sysctl."net.ipv4.conf.all.route_localnet" = 1;
systemd.services.sslh = let
iptablesCommands = [
# DROP martian packets as they would have been if route_localnet was zero
# Note: packets not leaving the server aren't affected by this, thus sslh will still work
{ table = "raw"; command = "PREROUTING ! -i lo -d 127.0.0.0/8 -j DROP"; }
{ table = "mangle"; command = "POSTROUTING ! -o lo -s 127.0.0.0/8 -j DROP"; }
# Mark all connections made by ssl for special treatment (here sslh is run as user ${user})
{ table = "nat"; command = "OUTPUT -m owner --uid-owner ${user} -p tcp --tcp-flags FIN,SYN,RST,ACK SYN -j CONNMARK --set-xmark 0x02/0x0f"; }
# Outgoing packets that should go to sslh instead have to be rerouted, so mark them accordingly (copying over the connection mark)
{ table = "mangle"; command = "OUTPUT ! -o lo -p tcp -m connmark --mark 0x02/0x0f -j CONNMARK --restore-mark --mask 0x0f"; }
];
ip6tablesCommands = [
{ table = "raw"; command = "PREROUTING ! -i lo -d ::1/128 -j DROP"; }
{ table = "mangle"; command = "POSTROUTING ! -o lo -s ::1/128 -j DROP"; }
{ table = "nat"; command = "OUTPUT -m owner --uid-owner ${user} -p tcp --tcp-flags FIN,SYN,RST,ACK SYN -j CONNMARK --set-xmark 0x02/0x0f"; }
{ table = "mangle"; command = "OUTPUT ! -o lo -p tcp -m connmark --mark 0x02/0x0f -j CONNMARK --restore-mark --mask 0x0f"; }
];
in {
path = [ pkgs.iptables pkgs.iproute2 pkgs.procps ];
preStart = ''
# Cleanup old iptables entries which might be still there
${concatMapStringsSep "\n" ({table, command}: "while iptables -w -t ${table} -D ${command} 2>/dev/null; do echo; done") iptablesCommands}
${concatMapStringsSep "\n" ({table, command}: "iptables -w -t ${table} -A ${command}" ) iptablesCommands}
# Configure routing for those marked packets
ip rule add fwmark 0x2 lookup 100
ip route add local 0.0.0.0/0 dev lo table 100
'' + optionalString config.networking.enableIPv6 ''
${concatMapStringsSep "\n" ({table, command}: "while ip6tables -w -t ${table} -D ${command} 2>/dev/null; do echo; done") ip6tablesCommands}
${concatMapStringsSep "\n" ({table, command}: "ip6tables -w -t ${table} -A ${command}" ) ip6tablesCommands}
ip -6 rule add fwmark 0x2 lookup 100
ip -6 route add local ::/0 dev lo table 100
'';
postStop = ''
${concatMapStringsSep "\n" ({table, command}: "iptables -w -t ${table} -D ${command}") iptablesCommands}
ip rule del fwmark 0x2 lookup 100
ip route del local 0.0.0.0/0 dev lo table 100
'' + optionalString config.networking.enableIPv6 ''
${concatMapStringsSep "\n" ({table, command}: "ip6tables -w -t ${table} -D ${command}") ip6tablesCommands}
ip -6 rule del fwmark 0x2 lookup 100
ip -6 route del local ::/0 dev lo table 100
'';
};
})
];
}