nixpkgs/nixos/modules/testing/test-instrumentation.nix
stuebinm 6afb255d97 nixos: remove all uses of lib.mdDoc
these changes were generated with nixq 0.0.2, by running

  nixq ">> lib.mdDoc[remove] Argument[keep]" --batchmode nixos/**.nix
  nixq ">> mdDoc[remove] Argument[keep]" --batchmode nixos/**.nix
  nixq ">> Inherit >> mdDoc[remove]" --batchmode nixos/**.nix

two mentions of the mdDoc function remain in nixos/, both of which
are inside of comments.

Since lib.mdDoc is already defined as just id, this commit is a no-op as
far as Nix (and the built manual) is concerned.
2024-04-13 10:07:35 -07:00

230 lines
7.8 KiB
Nix

# This module allows the test driver to connect to the virtual machine
# via a root shell attached to port 514.
{ options, config, lib, pkgs, ... }:
with lib;
let
cfg = config.testing;
qemu-common = import ../../lib/qemu-common.nix { inherit lib pkgs; };
backdoorService = {
requires = [ "dev-hvc0.device" "dev-${qemu-common.qemuSerialDevice}.device" ];
after = [ "dev-hvc0.device" "dev-${qemu-common.qemuSerialDevice}.device" ];
script =
''
export USER=root
export HOME=/root
export DISPLAY=:0.0
if [[ -e /etc/profile ]]; then
source /etc/profile
fi
# Don't use a pager when executing backdoor
# actions. Because we use a tty, commands like systemctl
# or nix-store get confused into thinking they're running
# interactively.
export PAGER=
cd /tmp
exec < /dev/hvc0 > /dev/hvc0
while ! exec 2> /dev/${qemu-common.qemuSerialDevice}; do sleep 0.1; done
echo "connecting to host..." >&2
stty -F /dev/hvc0 raw -echo # prevent nl -> cr/nl conversion
# The following line is essential since it signals to
# the test driver that the shell is ready.
# See: the connect method in the Machine class.
echo "Spawning backdoor root shell..."
# Passing the terminal device makes bash run non-interactively.
# Otherwise we get errors on the terminal because bash tries to
# setup things like job control.
# Note: calling bash explicitly here instead of sh makes sure that
# we can also run non-NixOS guests during tests. This, however, is
# mostly futureproofing as the test instrumentation is still very
# tightly coupled to NixOS.
PS1= exec ${pkgs.coreutils}/bin/env bash --norc /dev/hvc0
'';
serviceConfig.KillSignal = "SIGHUP";
};
in
{
options.testing = {
initrdBackdoor = lib.mkEnableOption ''
enable backdoor.service in initrd. Requires
boot.initrd.systemd.enable to be enabled. Boot will pause in
stage 1 at initrd.target, and will listen for commands from the
Machine python interface, just like stage 2 normally does. This
enables commands to be sent to test and debug stage 1. Use
machine.switch_root() to leave stage 1 and proceed to stage 2.
'';
};
config = {
assertions = [
{
assertion = cfg.initrdBackdoor -> config.boot.initrd.systemd.enable;
message = ''
testing.initrdBackdoor requires boot.initrd.systemd.enable to be enabled.
'';
}
];
systemd.services.backdoor = lib.mkMerge [
backdoorService
{
wantedBy = [ "multi-user.target" ];
}
];
boot.initrd.systemd = lib.mkMerge [
{
contents."/etc/systemd/journald.conf".text = ''
[Journal]
ForwardToConsole=yes
MaxLevelConsole=debug
'';
extraConfig = config.systemd.extraConfig;
}
(lib.mkIf cfg.initrdBackdoor {
# Implemented in machine.switch_root(). Suppress the unit by
# making it a noop without removing it, which would break
# initrd-parse-etc.service
services.initrd-cleanup.serviceConfig.ExecStart = [
# Reset
""
# noop
"/bin/true"
];
services.backdoor = lib.mkMerge [
backdoorService
{
# TODO: Both stage 1 and stage 2 should use these same
# settings. But a lot of existing tests rely on
# backdoor.service having default orderings,
# e.g. systemd-boot.update relies on /boot being mounted
# as soon as backdoor starts. But it can be useful for
# backdoor to start even earlier.
wantedBy = [ "sysinit.target" ];
unitConfig.DefaultDependencies = false;
conflicts = [ "shutdown.target" "initrd-switch-root.target" ];
before = [ "shutdown.target" "initrd-switch-root.target" ];
}
];
storePaths = [
"${pkgs.coreutils}/bin/env"
];
})
];
# Prevent agetty from being instantiated on the serial device, since it
# interferes with the backdoor (writes to it will randomly fail
# with EIO). Likewise for hvc0.
systemd.services."serial-getty@${qemu-common.qemuSerialDevice}".enable = false;
systemd.services."serial-getty@hvc0".enable = false;
# Only set these settings when the options exist. Some tests (e.g. those
# that do not specify any nodes, or an empty attr set as nodes) will not
# have the QEMU module loaded and thuse these options can't and should not
# be set.
virtualisation = lib.optionalAttrs (options ? virtualisation.qemu) {
qemu = {
# Only use a serial console, no TTY.
# NOTE: optionalAttrs
# test-instrumentation.nix appears to be used without qemu-vm.nix, so
# we avoid defining consoles if not possible.
# TODO: refactor such that test-instrumentation can import qemu-vm
# or declare virtualisation.qemu.console option in a module that's always imported
consoles = [ qemu-common.qemuSerialDevice ];
package = lib.mkDefault pkgs.qemu_test;
};
};
boot.kernel.sysctl = {
"kernel.hung_task_timeout_secs" = 600;
# Panic on out-of-memory conditions rather than letting the
# OOM killer randomly get rid of processes, since this leads
# to failures that are hard to diagnose.
"vm.panic_on_oom" = lib.mkDefault 2;
};
boot.kernelParams = [
"console=${qemu-common.qemuSerialDevice}"
# Panic if an error occurs in stage 1 (rather than waiting for
# user intervention).
"panic=1" "boot.panic_on_fail"
# Using acpi_pm as a clock source causes the guest clock to
# slow down under high host load. This is usually a bad
# thing, but for VM tests it should provide a bit more
# determinism (e.g. if the VM runs at lower speed, then
# timeouts in the VM should also be delayed).
"clocksource=acpi_pm"
];
# `xwininfo' is used by the test driver to query open windows.
environment.systemPackages = [ pkgs.xorg.xwininfo ];
# Log everything to the serial console.
services.journald.extraConfig =
''
ForwardToConsole=yes
MaxLevelConsole=debug
'';
systemd.extraConfig = ''
# Don't clobber the console with duplicate systemd messages.
ShowStatus=no
# Allow very slow start
DefaultTimeoutStartSec=300
DefaultDeviceTimeoutSec=300
'';
systemd.user.extraConfig = ''
# Allow very slow start
DefaultTimeoutStartSec=300
DefaultDeviceTimeoutSec=300
'';
boot.consoleLogLevel = 7;
# Prevent tests from accessing the Internet.
networking.defaultGateway = mkOverride 150 null;
networking.nameservers = mkOverride 150 [ ];
system.requiredKernelConfig = with config.lib.kernelConfig; [
(isYes "SERIAL_8250_CONSOLE")
(isYes "SERIAL_8250")
(isEnabled "VIRTIO_CONSOLE")
];
networking.usePredictableInterfaceNames = false;
# Make it easy to log in as root when running the test interactively.
# This needs to be a file because of a quirk in systemd credentials,
# where you cannot specify an empty string as a value. systemd-sysusers
# uses credentials to set passwords on users.
users.users.root.hashedPasswordFile = mkOverride 150 "${pkgs.writeText "hashed-password.root" ""}";
services.displayManager.logToJournal = true;
# Make sure we use the Guest Agent from the QEMU package for testing
# to reduce the closure size required for the tests.
services.qemuGuest.package = pkgs.qemu_test.ga;
# Squelch warning about unset system.stateVersion
system.stateVersion = lib.mkDefault lib.trivial.release;
};
}