nixpkgs/nixos/modules/profiles/all-hardware.nix
K900 5fbc094393 nixos/profile/all-hardware: remove simplefb
It's simpledrm now and it's compiled in.
2024-03-24 18:44:19 +03:00

118 lines
3.1 KiB
Nix

# This module enables all hardware supported by NixOS: i.e., all
# firmware is included, and all devices from which one may boot are
# enabled in the initrd. Its primary use is in the NixOS installation
# CDs.
{ pkgs, lib,... }:
let
platform = pkgs.stdenv.hostPlatform;
in
{
# The initrd has to contain any module that might be necessary for
# supporting the most important parts of HW like drives.
boot.initrd.availableKernelModules =
[ # SATA/PATA support.
"ahci"
"ata_piix"
"sata_inic162x" "sata_nv" "sata_promise" "sata_qstor"
"sata_sil" "sata_sil24" "sata_sis" "sata_svw" "sata_sx4"
"sata_uli" "sata_via" "sata_vsc"
"pata_ali" "pata_amd" "pata_artop" "pata_atiixp" "pata_efar"
"pata_hpt366" "pata_hpt37x" "pata_hpt3x2n" "pata_hpt3x3"
"pata_it8213" "pata_it821x" "pata_jmicron" "pata_marvell"
"pata_mpiix" "pata_netcell" "pata_ns87410" "pata_oldpiix"
"pata_pcmcia" "pata_pdc2027x" "pata_qdi" "pata_rz1000"
"pata_serverworks" "pata_sil680" "pata_sis"
"pata_sl82c105" "pata_triflex" "pata_via"
"pata_winbond"
# SCSI support (incomplete).
"3w-9xxx" "3w-xxxx" "aic79xx" "aic7xxx" "arcmsr" "hpsa"
# USB support, especially for booting from USB CD-ROM
# drives.
"uas"
# SD cards.
"sdhci_pci"
# NVMe drives
"nvme"
# Firewire support. Not tested.
"ohci1394" "sbp2"
# Virtio (QEMU, KVM etc.) support.
"virtio_net" "virtio_pci" "virtio_mmio" "virtio_blk" "virtio_scsi" "virtio_balloon" "virtio_console"
# VMware support.
"mptspi" "vmxnet3" "vsock"
] ++ lib.optional platform.isx86 "vmw_balloon"
++ lib.optionals (pkgs.stdenv.isi686 || pkgs.stdenv.isx86_64) [
"vmw_vmci" "vmwgfx" "vmw_vsock_vmci_transport"
# Hyper-V support.
"hv_storvsc"
] ++ lib.optionals pkgs.stdenv.hostPlatform.isAarch [
# Allwinner support
# Required for early KMS
"sun4i-drm"
"sun8i-mixer" # Audio, but required for kms
# PWM for the backlight
"pwm-sun4i"
# Broadcom
"vc4"
] ++ lib.optionals pkgs.stdenv.isAarch64 [
# Most of the following falls into two categories:
# - early KMS / early display
# - early storage (e.g. USB) support
# Broadcom
"pcie-brcmstb"
# Rockchip
"dw-hdmi"
"dw-mipi-dsi"
"rockchipdrm"
"rockchip-rga"
"phy-rockchip-pcie"
"pcie-rockchip-host"
# Misc. uncategorized hardware
# Used for some platform's integrated displays
"panel-simple"
"pwm-bl"
# Power supply drivers, some platforms need them for USB
"axp20x-ac-power"
"axp20x-battery"
"pinctrl-axp209"
"mp8859"
# USB drivers
"xhci-pci-renesas"
# Reset controllers
"reset-raspberrypi" # Triggers USB chip firmware load.
# Misc "weak" dependencies
"analogix-dp"
"analogix-anx6345" # For DP or eDP (e.g. integrated display)
];
# Include lots of firmware.
hardware.enableRedistributableFirmware = true;
imports =
[ ../hardware/network/zydas-zd1211.nix ];
}