dt-bindings: drop generic headers

Drop all the subsystem headers that are compatible with the headers in
dts/upstream.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
This commit is contained in:
Caleb Connolly
2024-04-18 19:39:57 +01:00
committed by Tom Rini
parent 6416166eec
commit 1ef61c338d
13 changed files with 0 additions and 1193 deletions

View File

@@ -1,20 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
/*
* This header provides constants for most AHCI bindings.
*/
#ifndef _DT_BINDINGS_ATA_AHCI_H
#define _DT_BINDINGS_ATA_AHCI_H
/* Host Bus Adapter generic platform capabilities */
#define HBA_SSS (1 << 27)
#define HBA_SMPS (1 << 28)
/* Host Bus Adapter port-specific platform capabilities */
#define HBA_PORT_HPCP (1 << 18)
#define HBA_PORT_MPSP (1 << 19)
#define HBA_PORT_CPD (1 << 20)
#define HBA_PORT_ESP (1 << 21)
#define HBA_PORT_FBSCP (1 << 22)
#endif

View File

@@ -1,42 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for most GPIO bindings.
*
* Most GPIO bindings include a flags cell as part of the GPIO specifier.
* In most cases, the format of the flags cell uses the standard values
* defined in this header.
*/
#ifndef _DT_BINDINGS_GPIO_GPIO_H
#define _DT_BINDINGS_GPIO_GPIO_H
/* Bit 0 express polarity */
#define GPIO_ACTIVE_HIGH 0
#define GPIO_ACTIVE_LOW 1
/* Bit 1 express single-endedness */
#define GPIO_PUSH_PULL 0
#define GPIO_SINGLE_ENDED 2
/* Bit 2 express Open drain or open source */
#define GPIO_LINE_OPEN_SOURCE 0
#define GPIO_LINE_OPEN_DRAIN 4
/*
* Open Drain/Collector is the combination of single-ended open drain interface.
* Open Source/Emitter is the combination of single-ended open source interface.
*/
#define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_DRAIN)
#define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_SOURCE)
/* Bit 3 express GPIO suspend/resume and reset persistence */
#define GPIO_PERSISTENT 0
#define GPIO_TRANSITORY 8
/* Bit 4 express pull up */
#define GPIO_PULL_UP 16
/* Bit 5 express pull down */
#define GPIO_PULL_DOWN 32
#endif

View File

@@ -1,13 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for gpio keys bindings.
*/
#ifndef _DT_BINDINGS_GPIO_KEYS_H
#define _DT_BINDINGS_GPIO_KEYS_H
#define EV_ACT_ANY 0x00 /* asserted or deasserted */
#define EV_ACT_ASSERTED 0x01 /* asserted */
#define EV_ACT_DEASSERTED 0x02 /* deasserted */
#endif /* _DT_BINDINGS_GPIO_KEYS_H */

View File

@@ -1,17 +0,0 @@
/*
* This header provides constants for most input bindings.
*
* Most input bindings include key code, matrix key code format.
* In most cases, key code and matrix key code format uses
* the standard values/macro defined in this header.
*/
#ifndef _DT_BINDINGS_INPUT_INPUT_H
#define _DT_BINDINGS_INPUT_INPUT_H
#include "linux-event-codes.h"
#define MATRIX_KEY(row, col, code) \
((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
#endif /* _DT_BINDINGS_INPUT_INPUT_H */

View File

@@ -1,806 +0,0 @@
/*
* Input event codes
*
* *** IMPORTANT ***
* This file is not only included from C-code but also from devicetree source
* files. As such this file MUST only contain comments and defines.
*
* Copyright (c) 1999-2002 Vojtech Pavlik
* Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef _UAPI_INPUT_EVENT_CODES_H
#define _UAPI_INPUT_EVENT_CODES_H
/*
* Device properties and quirks
*/
#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
#define INPUT_PROP_MAX 0x1f
#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
/*
* Event types
*/
#define EV_SYN 0x00
#define EV_KEY 0x01
#define EV_REL 0x02
#define EV_ABS 0x03
#define EV_MSC 0x04
#define EV_SW 0x05
#define EV_LED 0x11
#define EV_SND 0x12
#define EV_REP 0x14
#define EV_FF 0x15
#define EV_PWR 0x16
#define EV_FF_STATUS 0x17
#define EV_MAX 0x1f
#define EV_CNT (EV_MAX+1)
/*
* Synchronization events.
*/
#define SYN_REPORT 0
#define SYN_CONFIG 1
#define SYN_MT_REPORT 2
#define SYN_DROPPED 3
#define SYN_MAX 0xf
#define SYN_CNT (SYN_MAX+1)
/*
* Keys and buttons
*
* Most of the keys/buttons are modeled after USB HUT 1.12
* (see http://www.usb.org/developers/hidpage).
* Abbreviations in the comments:
* AC - Application Control
* AL - Application Launch Button
* SC - System Control
*/
#define KEY_RESERVED 0
#define KEY_ESC 1
#define KEY_1 2
#define KEY_2 3
#define KEY_3 4
#define KEY_4 5
#define KEY_5 6
#define KEY_6 7
#define KEY_7 8
#define KEY_8 9
#define KEY_9 10
#define KEY_0 11
#define KEY_MINUS 12
#define KEY_EQUAL 13
#define KEY_BACKSPACE 14
#define KEY_TAB 15
#define KEY_Q 16
#define KEY_W 17
#define KEY_E 18
#define KEY_R 19
#define KEY_T 20
#define KEY_Y 21
#define KEY_U 22
#define KEY_I 23
#define KEY_O 24
#define KEY_P 25
#define KEY_LEFTBRACE 26
#define KEY_RIGHTBRACE 27
#define KEY_ENTER 28
#define KEY_LEFTCTRL 29
#define KEY_A 30
#define KEY_S 31
#define KEY_D 32
#define KEY_F 33
#define KEY_G 34
#define KEY_H 35
#define KEY_J 36
#define KEY_K 37
#define KEY_L 38
#define KEY_SEMICOLON 39
#define KEY_APOSTROPHE 40
#define KEY_GRAVE 41
#define KEY_LEFTSHIFT 42
#define KEY_BACKSLASH 43
#define KEY_Z 44
#define KEY_X 45
#define KEY_C 46
#define KEY_V 47
#define KEY_B 48
#define KEY_N 49
#define KEY_M 50
#define KEY_COMMA 51
#define KEY_DOT 52
#define KEY_SLASH 53
#define KEY_RIGHTSHIFT 54
#define KEY_KPASTERISK 55
#define KEY_LEFTALT 56
#define KEY_SPACE 57
#define KEY_CAPSLOCK 58
#define KEY_F1 59
#define KEY_F2 60
#define KEY_F3 61
#define KEY_F4 62
#define KEY_F5 63
#define KEY_F6 64
#define KEY_F7 65
#define KEY_F8 66
#define KEY_F9 67
#define KEY_F10 68
#define KEY_NUMLOCK 69
#define KEY_SCROLLLOCK 70
#define KEY_KP7 71
#define KEY_KP8 72
#define KEY_KP9 73
#define KEY_KPMINUS 74
#define KEY_KP4 75
#define KEY_KP5 76
#define KEY_KP6 77
#define KEY_KPPLUS 78
#define KEY_KP1 79
#define KEY_KP2 80
#define KEY_KP3 81
#define KEY_KP0 82
#define KEY_KPDOT 83
#define KEY_ZENKAKUHANKAKU 85
#define KEY_102ND 86
#define KEY_F11 87
#define KEY_F12 88
#define KEY_RO 89
#define KEY_KATAKANA 90
#define KEY_HIRAGANA 91
#define KEY_HENKAN 92
#define KEY_KATAKANAHIRAGANA 93
#define KEY_MUHENKAN 94
#define KEY_KPJPCOMMA 95
#define KEY_KPENTER 96
#define KEY_RIGHTCTRL 97
#define KEY_KPSLASH 98
#define KEY_SYSRQ 99
#define KEY_RIGHTALT 100
#define KEY_LINEFEED 101
#define KEY_HOME 102
#define KEY_UP 103
#define KEY_PAGEUP 104
#define KEY_LEFT 105
#define KEY_RIGHT 106
#define KEY_END 107
#define KEY_DOWN 108
#define KEY_PAGEDOWN 109
#define KEY_INSERT 110
#define KEY_DELETE 111
#define KEY_MACRO 112
#define KEY_MUTE 113
#define KEY_VOLUMEDOWN 114
#define KEY_VOLUMEUP 115
#define KEY_POWER 116 /* SC System Power Down */
#define KEY_KPEQUAL 117
#define KEY_KPPLUSMINUS 118
#define KEY_PAUSE 119
#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
#define KEY_KPCOMMA 121
#define KEY_HANGEUL 122
#define KEY_HANGUEL KEY_HANGEUL
#define KEY_HANJA 123
#define KEY_YEN 124
#define KEY_LEFTMETA 125
#define KEY_RIGHTMETA 126
#define KEY_COMPOSE 127
#define KEY_STOP 128 /* AC Stop */
#define KEY_AGAIN 129
#define KEY_PROPS 130 /* AC Properties */
#define KEY_UNDO 131 /* AC Undo */
#define KEY_FRONT 132
#define KEY_COPY 133 /* AC Copy */
#define KEY_OPEN 134 /* AC Open */
#define KEY_PASTE 135 /* AC Paste */
#define KEY_FIND 136 /* AC Search */
#define KEY_CUT 137 /* AC Cut */
#define KEY_HELP 138 /* AL Integrated Help Center */
#define KEY_MENU 139 /* Menu (show menu) */
#define KEY_CALC 140 /* AL Calculator */
#define KEY_SETUP 141
#define KEY_SLEEP 142 /* SC System Sleep */
#define KEY_WAKEUP 143 /* System Wake Up */
#define KEY_FILE 144 /* AL Local Machine Browser */
#define KEY_SENDFILE 145
#define KEY_DELETEFILE 146
#define KEY_XFER 147
#define KEY_PROG1 148
#define KEY_PROG2 149
#define KEY_WWW 150 /* AL Internet Browser */
#define KEY_MSDOS 151
#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
#define KEY_SCREENLOCK KEY_COFFEE
#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
#define KEY_DIRECTION KEY_ROTATE_DISPLAY
#define KEY_CYCLEWINDOWS 154
#define KEY_MAIL 155
#define KEY_BOOKMARKS 156 /* AC Bookmarks */
#define KEY_COMPUTER 157
#define KEY_BACK 158 /* AC Back */
#define KEY_FORWARD 159 /* AC Forward */
#define KEY_CLOSECD 160
#define KEY_EJECTCD 161
#define KEY_EJECTCLOSECD 162
#define KEY_NEXTSONG 163
#define KEY_PLAYPAUSE 164
#define KEY_PREVIOUSSONG 165
#define KEY_STOPCD 166
#define KEY_RECORD 167
#define KEY_REWIND 168
#define KEY_PHONE 169 /* Media Select Telephone */
#define KEY_ISO 170
#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
#define KEY_HOMEPAGE 172 /* AC Home */
#define KEY_REFRESH 173 /* AC Refresh */
#define KEY_EXIT 174 /* AC Exit */
#define KEY_MOVE 175
#define KEY_EDIT 176
#define KEY_SCROLLUP 177
#define KEY_SCROLLDOWN 178
#define KEY_KPLEFTPAREN 179
#define KEY_KPRIGHTPAREN 180
#define KEY_NEW 181 /* AC New */
#define KEY_REDO 182 /* AC Redo/Repeat */
#define KEY_F13 183
#define KEY_F14 184
#define KEY_F15 185
#define KEY_F16 186
#define KEY_F17 187
#define KEY_F18 188
#define KEY_F19 189
#define KEY_F20 190
#define KEY_F21 191
#define KEY_F22 192
#define KEY_F23 193
#define KEY_F24 194
#define KEY_PLAYCD 200
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
#define KEY_DASHBOARD 204 /* AL Dashboard */
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
#define KEY_FASTFORWARD 208
#define KEY_BASSBOOST 209
#define KEY_PRINT 210 /* AC Print */
#define KEY_HP 211
#define KEY_CAMERA 212
#define KEY_SOUND 213
#define KEY_QUESTION 214
#define KEY_EMAIL 215
#define KEY_CHAT 216
#define KEY_SEARCH 217
#define KEY_CONNECT 218
#define KEY_FINANCE 219 /* AL Checkbook/Finance */
#define KEY_SPORT 220
#define KEY_SHOP 221
#define KEY_ALTERASE 222
#define KEY_CANCEL 223 /* AC Cancel */
#define KEY_BRIGHTNESSDOWN 224
#define KEY_BRIGHTNESSUP 225
#define KEY_MEDIA 226
#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
outputs (Monitor/LCD/TV-out/etc) */
#define KEY_KBDILLUMTOGGLE 228
#define KEY_KBDILLUMDOWN 229
#define KEY_KBDILLUMUP 230
#define KEY_SEND 231 /* AC Send */
#define KEY_REPLY 232 /* AC Reply */
#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
#define KEY_SAVE 234 /* AC Save */
#define KEY_DOCUMENTS 235
#define KEY_BATTERY 236
#define KEY_BLUETOOTH 237
#define KEY_WLAN 238
#define KEY_UWB 239
#define KEY_UNKNOWN 240
#define KEY_VIDEO_NEXT 241 /* drive next video source */
#define KEY_VIDEO_PREV 242 /* drive previous video source */
#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
brightness control is off,
rely on ambient */
#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
#define KEY_DISPLAY_OFF 245 /* display device to off state */
#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
#define KEY_WIMAX KEY_WWAN
#define KEY_RFKILL 247 /* Key that controls all radios */
#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
/* Code 255 is reserved for special needs of AT keyboard driver */
#define BTN_MISC 0x100
#define BTN_0 0x100
#define BTN_1 0x101
#define BTN_2 0x102
#define BTN_3 0x103
#define BTN_4 0x104
#define BTN_5 0x105
#define BTN_6 0x106
#define BTN_7 0x107
#define BTN_8 0x108
#define BTN_9 0x109
#define BTN_MOUSE 0x110
#define BTN_LEFT 0x110
#define BTN_RIGHT 0x111
#define BTN_MIDDLE 0x112
#define BTN_SIDE 0x113
#define BTN_EXTRA 0x114
#define BTN_FORWARD 0x115
#define BTN_BACK 0x116
#define BTN_TASK 0x117
#define BTN_JOYSTICK 0x120
#define BTN_TRIGGER 0x120
#define BTN_THUMB 0x121
#define BTN_THUMB2 0x122
#define BTN_TOP 0x123
#define BTN_TOP2 0x124
#define BTN_PINKIE 0x125
#define BTN_BASE 0x126
#define BTN_BASE2 0x127
#define BTN_BASE3 0x128
#define BTN_BASE4 0x129
#define BTN_BASE5 0x12a
#define BTN_BASE6 0x12b
#define BTN_DEAD 0x12f
#define BTN_GAMEPAD 0x130
#define BTN_SOUTH 0x130
#define BTN_A BTN_SOUTH
#define BTN_EAST 0x131
#define BTN_B BTN_EAST
#define BTN_C 0x132
#define BTN_NORTH 0x133
#define BTN_X BTN_NORTH
#define BTN_WEST 0x134
#define BTN_Y BTN_WEST
#define BTN_Z 0x135
#define BTN_TL 0x136
#define BTN_TR 0x137
#define BTN_TL2 0x138
#define BTN_TR2 0x139
#define BTN_SELECT 0x13a
#define BTN_START 0x13b
#define BTN_MODE 0x13c
#define BTN_THUMBL 0x13d
#define BTN_THUMBR 0x13e
#define BTN_DIGI 0x140
#define BTN_TOOL_PEN 0x140
#define BTN_TOOL_RUBBER 0x141
#define BTN_TOOL_BRUSH 0x142
#define BTN_TOOL_PENCIL 0x143
#define BTN_TOOL_AIRBRUSH 0x144
#define BTN_TOOL_FINGER 0x145
#define BTN_TOOL_MOUSE 0x146
#define BTN_TOOL_LENS 0x147
#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
#define BTN_TOUCH 0x14a
#define BTN_STYLUS 0x14b
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define BTN_GEAR_UP 0x151
#define KEY_OK 0x160
#define KEY_SELECT 0x161
#define KEY_GOTO 0x162
#define KEY_CLEAR 0x163
#define KEY_POWER2 0x164
#define KEY_OPTION 0x165
#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
#define KEY_TIME 0x167
#define KEY_VENDOR 0x168
#define KEY_ARCHIVE 0x169
#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
#define KEY_CHANNEL 0x16b
#define KEY_FAVORITES 0x16c
#define KEY_EPG 0x16d
#define KEY_PVR 0x16e /* Media Select Home */
#define KEY_MHP 0x16f
#define KEY_LANGUAGE 0x170
#define KEY_TITLE 0x171
#define KEY_SUBTITLE 0x172
#define KEY_ANGLE 0x173
#define KEY_ZOOM 0x174
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
#define KEY_SCREEN 0x177
#define KEY_PC 0x178 /* Media Select Computer */
#define KEY_TV 0x179 /* Media Select TV */
#define KEY_TV2 0x17a /* Media Select Cable */
#define KEY_VCR 0x17b /* Media Select VCR */
#define KEY_VCR2 0x17c /* VCR Plus */
#define KEY_SAT 0x17d /* Media Select Satellite */
#define KEY_SAT2 0x17e
#define KEY_CD 0x17f /* Media Select CD */
#define KEY_TAPE 0x180 /* Media Select Tape */
#define KEY_RADIO 0x181
#define KEY_TUNER 0x182 /* Media Select Tuner */
#define KEY_PLAYER 0x183
#define KEY_TEXT 0x184
#define KEY_DVD 0x185 /* Media Select DVD */
#define KEY_AUX 0x186
#define KEY_MP3 0x187
#define KEY_AUDIO 0x188 /* AL Audio Browser */
#define KEY_VIDEO 0x189 /* AL Movie Browser */
#define KEY_DIRECTORY 0x18a
#define KEY_LIST 0x18b
#define KEY_MEMO 0x18c /* Media Select Messages */
#define KEY_CALENDAR 0x18d
#define KEY_RED 0x18e
#define KEY_GREEN 0x18f
#define KEY_YELLOW 0x190
#define KEY_BLUE 0x191
#define KEY_CHANNELUP 0x192 /* Channel Increment */
#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
#define KEY_FIRST 0x194
#define KEY_LAST 0x195 /* Recall Last */
#define KEY_AB 0x196
#define KEY_NEXT 0x197
#define KEY_RESTART 0x198
#define KEY_SLOW 0x199
#define KEY_SHUFFLE 0x19a
#define KEY_BREAK 0x19b
#define KEY_PREVIOUS 0x19c
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
#define KEY_GAMES 0x1a1 /* Media Select Games */
#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
#define KEY_EDITOR 0x1a6 /* AL Text Editor */
#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
#define KEY_DATABASE 0x1aa /* AL Database App */
#define KEY_NEWS 0x1ab /* AL Newsreader */
#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
#define KEY_DOLLAR 0x1b2
#define KEY_EURO 0x1b3
#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
#define KEY_FRAMEFORWARD 0x1b5
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
#define KEY_IMAGES 0x1ba /* AL Image Browser */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
#define KEY_DEL_LINE 0x1c3
#define KEY_FN 0x1d0
#define KEY_FN_ESC 0x1d1
#define KEY_FN_F1 0x1d2
#define KEY_FN_F2 0x1d3
#define KEY_FN_F3 0x1d4
#define KEY_FN_F4 0x1d5
#define KEY_FN_F5 0x1d6
#define KEY_FN_F6 0x1d7
#define KEY_FN_F7 0x1d8
#define KEY_FN_F8 0x1d9
#define KEY_FN_F9 0x1da
#define KEY_FN_F10 0x1db
#define KEY_FN_F11 0x1dc
#define KEY_FN_F12 0x1dd
#define KEY_FN_1 0x1de
#define KEY_FN_2 0x1df
#define KEY_FN_D 0x1e0
#define KEY_FN_E 0x1e1
#define KEY_FN_F 0x1e2
#define KEY_FN_S 0x1e3
#define KEY_FN_B 0x1e4
#define KEY_BRL_DOT1 0x1f1
#define KEY_BRL_DOT2 0x1f2
#define KEY_BRL_DOT3 0x1f3
#define KEY_BRL_DOT4 0x1f4
#define KEY_BRL_DOT5 0x1f5
#define KEY_BRL_DOT6 0x1f6
#define KEY_BRL_DOT7 0x1f7
#define KEY_BRL_DOT8 0x1f8
#define KEY_BRL_DOT9 0x1f9
#define KEY_BRL_DOT10 0x1fa
#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
#define KEY_NUMERIC_1 0x201 /* and other keypads */
#define KEY_NUMERIC_2 0x202
#define KEY_NUMERIC_3 0x203
#define KEY_NUMERIC_4 0x204
#define KEY_NUMERIC_5 0x205
#define KEY_NUMERIC_6 0x206
#define KEY_NUMERIC_7 0x207
#define KEY_NUMERIC_8 0x208
#define KEY_NUMERIC_9 0x209
#define KEY_NUMERIC_STAR 0x20a
#define KEY_NUMERIC_POUND 0x20b
#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
#define KEY_NUMERIC_B 0x20d
#define KEY_NUMERIC_C 0x20e
#define KEY_NUMERIC_D 0x20f
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
#define KEY_TOUCHPAD_ON 0x213
#define KEY_TOUCHPAD_OFF 0x214
#define KEY_CAMERA_ZOOMIN 0x215
#define KEY_CAMERA_ZOOMOUT 0x216
#define KEY_CAMERA_UP 0x217
#define KEY_CAMERA_DOWN 0x218
#define KEY_CAMERA_LEFT 0x219
#define KEY_CAMERA_RIGHT 0x21a
#define KEY_ATTENDANT_ON 0x21b
#define KEY_ATTENDANT_OFF 0x21c
#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
#define BTN_DPAD_UP 0x220
#define BTN_DPAD_DOWN 0x221
#define BTN_DPAD_LEFT 0x222
#define BTN_DPAD_RIGHT 0x223
#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
#define KEY_KBDINPUTASSIST_PREV 0x260
#define KEY_KBDINPUTASSIST_NEXT 0x261
#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
#define KEY_KBDINPUTASSIST_ACCEPT 0x264
#define KEY_KBDINPUTASSIST_CANCEL 0x265
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
#define BTN_TRIGGER_HAPPY3 0x2c2
#define BTN_TRIGGER_HAPPY4 0x2c3
#define BTN_TRIGGER_HAPPY5 0x2c4
#define BTN_TRIGGER_HAPPY6 0x2c5
#define BTN_TRIGGER_HAPPY7 0x2c6
#define BTN_TRIGGER_HAPPY8 0x2c7
#define BTN_TRIGGER_HAPPY9 0x2c8
#define BTN_TRIGGER_HAPPY10 0x2c9
#define BTN_TRIGGER_HAPPY11 0x2ca
#define BTN_TRIGGER_HAPPY12 0x2cb
#define BTN_TRIGGER_HAPPY13 0x2cc
#define BTN_TRIGGER_HAPPY14 0x2cd
#define BTN_TRIGGER_HAPPY15 0x2ce
#define BTN_TRIGGER_HAPPY16 0x2cf
#define BTN_TRIGGER_HAPPY17 0x2d0
#define BTN_TRIGGER_HAPPY18 0x2d1
#define BTN_TRIGGER_HAPPY19 0x2d2
#define BTN_TRIGGER_HAPPY20 0x2d3
#define BTN_TRIGGER_HAPPY21 0x2d4
#define BTN_TRIGGER_HAPPY22 0x2d5
#define BTN_TRIGGER_HAPPY23 0x2d6
#define BTN_TRIGGER_HAPPY24 0x2d7
#define BTN_TRIGGER_HAPPY25 0x2d8
#define BTN_TRIGGER_HAPPY26 0x2d9
#define BTN_TRIGGER_HAPPY27 0x2da
#define BTN_TRIGGER_HAPPY28 0x2db
#define BTN_TRIGGER_HAPPY29 0x2dc
#define BTN_TRIGGER_HAPPY30 0x2dd
#define BTN_TRIGGER_HAPPY31 0x2de
#define BTN_TRIGGER_HAPPY32 0x2df
#define BTN_TRIGGER_HAPPY33 0x2e0
#define BTN_TRIGGER_HAPPY34 0x2e1
#define BTN_TRIGGER_HAPPY35 0x2e2
#define BTN_TRIGGER_HAPPY36 0x2e3
#define BTN_TRIGGER_HAPPY37 0x2e4
#define BTN_TRIGGER_HAPPY38 0x2e5
#define BTN_TRIGGER_HAPPY39 0x2e6
#define BTN_TRIGGER_HAPPY40 0x2e7
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x2ff
#define KEY_CNT (KEY_MAX+1)
/*
* Relative axes
*/
#define REL_X 0x00
#define REL_Y 0x01
#define REL_Z 0x02
#define REL_RX 0x03
#define REL_RY 0x04
#define REL_RZ 0x05
#define REL_HWHEEL 0x06
#define REL_DIAL 0x07
#define REL_WHEEL 0x08
#define REL_MISC 0x09
#define REL_MAX 0x0f
#define REL_CNT (REL_MAX+1)
/*
* Absolute axes
*/
#define ABS_X 0x00
#define ABS_Y 0x01
#define ABS_Z 0x02
#define ABS_RX 0x03
#define ABS_RY 0x04
#define ABS_RZ 0x05
#define ABS_THROTTLE 0x06
#define ABS_RUDDER 0x07
#define ABS_WHEEL 0x08
#define ABS_GAS 0x09
#define ABS_BRAKE 0x0a
#define ABS_HAT0X 0x10
#define ABS_HAT0Y 0x11
#define ABS_HAT1X 0x12
#define ABS_HAT1Y 0x13
#define ABS_HAT2X 0x14
#define ABS_HAT2Y 0x15
#define ABS_HAT3X 0x16
#define ABS_HAT3Y 0x17
#define ABS_PRESSURE 0x18
#define ABS_DISTANCE 0x19
#define ABS_TILT_X 0x1a
#define ABS_TILT_Y 0x1b
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
#define ABS_MT_SLOT 0x2f /* MT slot being modified */
#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
/*
* Switch events
*/
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
set = radio enabled */
#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
#define SW_DOCK 0x05 /* set = plugged into dock */
#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
#define SW_MAX 0x10
#define SW_CNT (SW_MAX+1)
/*
* Misc events
*/
#define MSC_SERIAL 0x00
#define MSC_PULSELED 0x01
#define MSC_GESTURE 0x02
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
#define MSC_TIMESTAMP 0x05
#define MSC_MAX 0x07
#define MSC_CNT (MSC_MAX+1)
/*
* LEDs
*/
#define LED_NUML 0x00
#define LED_CAPSL 0x01
#define LED_SCROLLL 0x02
#define LED_COMPOSE 0x03
#define LED_KANA 0x04
#define LED_SLEEP 0x05
#define LED_SUSPEND 0x06
#define LED_MUTE 0x07
#define LED_MISC 0x08
#define LED_MAIL 0x09
#define LED_CHARGING 0x0a
#define LED_MAX 0x0f
#define LED_CNT (LED_MAX+1)
/*
* Autorepeat values
*/
#define REP_DELAY 0x00
#define REP_PERIOD 0x01
#define REP_MAX 0x01
#define REP_CNT (REP_MAX+1)
/*
* Sounds
*/
#define SND_CLICK 0x00
#define SND_BELL 0x01
#define SND_TONE 0x02
#define SND_MAX 0x07
#define SND_CNT (SND_MAX+1)
#endif

View File

@@ -1,19 +0,0 @@
/*
* This header provides constants for most IRQ bindings.
*
* Most IRQ bindings include a flags cell as part of the IRQ specifier.
* In most cases, the format of the flags cell uses the standard values
* defined in this header.
*/
#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
#define IRQ_TYPE_NONE 0
#define IRQ_TYPE_EDGE_RISING 1
#define IRQ_TYPE_EDGE_FALLING 2
#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
#define IRQ_TYPE_LEVEL_HIGH 4
#define IRQ_TYPE_LEVEL_LOW 8
#endif

View File

@@ -1,106 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides macros for the common LEDs device tree bindings.
*
* Copyright (C) 2015, Samsung Electronics Co., Ltd.
* Author: Jacek Anaszewski <j.anaszewski@samsung.com>
*
* Copyright (C) 2019 Jacek Anaszewski <jacek.anaszewski@gmail.com>
* Copyright (C) 2020 Pavel Machek <pavel@ucw.cz>
*/
#ifndef __DT_BINDINGS_LEDS_H
#define __DT_BINDINGS_LEDS_H
/* External trigger type */
#define LEDS_TRIG_TYPE_EDGE 0
#define LEDS_TRIG_TYPE_LEVEL 1
/* Boost modes */
#define LEDS_BOOST_OFF 0
#define LEDS_BOOST_ADAPTIVE 1
#define LEDS_BOOST_FIXED 2
/* Standard LED colors */
#define LED_COLOR_ID_WHITE 0
#define LED_COLOR_ID_RED 1
#define LED_COLOR_ID_GREEN 2
#define LED_COLOR_ID_BLUE 3
#define LED_COLOR_ID_AMBER 4
#define LED_COLOR_ID_VIOLET 5
#define LED_COLOR_ID_YELLOW 6
#define LED_COLOR_ID_IR 7
#define LED_COLOR_ID_MULTI 8 /* For multicolor LEDs */
#define LED_COLOR_ID_RGB 9 /* For multicolor LEDs that can do arbitrary color,
so this would include RGBW and similar */
#define LED_COLOR_ID_PURPLE 10
#define LED_COLOR_ID_ORANGE 11
#define LED_COLOR_ID_PINK 12
#define LED_COLOR_ID_CYAN 13
#define LED_COLOR_ID_LIME 14
#define LED_COLOR_ID_MAX 15
/* Standard LED functions */
/* Keyboard LEDs, usually it would be input4::capslock etc. */
/* Obsolete equivalent: "shift-key-light" */
#define LED_FUNCTION_CAPSLOCK "capslock"
#define LED_FUNCTION_SCROLLLOCK "scrolllock"
#define LED_FUNCTION_NUMLOCK "numlock"
/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
"lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
/* System LEDs, usually found on system body.
platform::mute (etc) is sometimes seen, :mute would be better */
#define LED_FUNCTION_POWER "power"
#define LED_FUNCTION_DISK "disk"
/* Obsolete: "platform:*:charging" (allwinner sun50i) */
#define LED_FUNCTION_CHARGING "charging"
/* Used RGB notification LEDs common on phones.
Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4),
"lp5523:{r,g,b}" (Nokia N900) */
#define LED_FUNCTION_STATUS "status"
#define LED_FUNCTION_MICMUTE "micmute"
#define LED_FUNCTION_MUTE "mute"
/* Used for player LEDs as found on game controllers from e.g. Nintendo, Sony. */
#define LED_FUNCTION_PLAYER1 "player-1"
#define LED_FUNCTION_PLAYER2 "player-2"
#define LED_FUNCTION_PLAYER3 "player-3"
#define LED_FUNCTION_PLAYER4 "player-4"
#define LED_FUNCTION_PLAYER5 "player-5"
/* Miscelleaus functions. Use functions above if you can. */
#define LED_FUNCTION_ACTIVITY "activity"
#define LED_FUNCTION_ALARM "alarm"
#define LED_FUNCTION_BACKLIGHT "backlight"
#define LED_FUNCTION_BLUETOOTH "bluetooth"
#define LED_FUNCTION_BOOT "boot"
#define LED_FUNCTION_CPU "cpu"
#define LED_FUNCTION_DEBUG "debug"
#define LED_FUNCTION_DISK_ACTIVITY "disk-activity"
#define LED_FUNCTION_DISK_ERR "disk-err"
#define LED_FUNCTION_DISK_READ "disk-read"
#define LED_FUNCTION_DISK_WRITE "disk-write"
#define LED_FUNCTION_FAULT "fault"
#define LED_FUNCTION_FLASH "flash"
#define LED_FUNCTION_HEARTBEAT "heartbeat"
#define LED_FUNCTION_INDICATOR "indicator"
#define LED_FUNCTION_LAN "lan"
#define LED_FUNCTION_MAIL "mail"
#define LED_FUNCTION_MTD "mtd"
#define LED_FUNCTION_PANIC "panic"
#define LED_FUNCTION_PROGRAMMING "programming"
#define LED_FUNCTION_RX "rx"
#define LED_FUNCTION_SD "sd"
#define LED_FUNCTION_STANDBY "standby"
#define LED_FUNCTION_TORCH "torch"
#define LED_FUNCTION_TX "tx"
#define LED_FUNCTION_USB "usb"
#define LED_FUNCTION_WAN "wan"
#define LED_FUNCTION_WLAN "wlan"
#define LED_FUNCTION_WPS "wps"
#endif /* __DT_BINDINGS_LEDS_H */

View File

@@ -1,17 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for most Multiplexer bindings.
*
* Most Multiplexer bindings specify an idle state. In most cases, the
* the multiplexer can be left as is when idle, and in some cases it can
* disconnect the input/output and leave the multiplexer in a high
* impedance state.
*/
#ifndef _DT_BINDINGS_MUX_MUX_H
#define _DT_BINDINGS_MUX_MUX_H
#define MUX_IDLE_AS_IS (-1)
#define MUX_IDLE_DISCONNECT (-2)
#endif

View File

@@ -1,26 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
*
* This header provides constants for the phy framework
*
* Copyright (C) 2014 STMicroelectronics
* Author: Gabriel Fernandez <gabriel.fernandez@st.com>
*/
#ifndef _DT_BINDINGS_PHY
#define _DT_BINDINGS_PHY
#define PHY_NONE 0
#define PHY_TYPE_SATA 1
#define PHY_TYPE_PCIE 2
#define PHY_TYPE_USB2 3
#define PHY_TYPE_USB3 4
#define PHY_TYPE_UFS 5
#define PHY_TYPE_DP 6
#define PHY_TYPE_XPCS 7
#define PHY_TYPE_SGMII 8
#define PHY_TYPE_QSGMII 9
#define PHY_TYPE_DPHY 10
#define PHY_TYPE_CPHY 11
#endif /* _DT_BINDINGS_PHY */

View File

@@ -1,14 +0,0 @@
/*
* This header provides constants for most PWM bindings.
*
* Most PWM bindings can include a flags cell as part of the PWM specifier.
* In most cases, the format of the flags cell uses the standard values
* defined in this header.
*/
#ifndef _DT_BINDINGS_PWM_PWM_H
#define _DT_BINDINGS_PWM_PWM_H
#define PWM_POLARITY_INVERTED (1 << 0)
#endif

View File

@@ -1,10 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*/
#ifndef __DT_BINDINGS_SPMI_H
#define __DT_BINDINGS_SPMI_H
#define SPMI_USID 0
#define SPMI_GSID 1
#endif

View File

@@ -1,15 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* This header provides constants for most thermal bindings.
*
* Copyright (C) 2013 Texas Instruments
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
#ifndef _DT_BINDINGS_THERMAL_THERMAL_H
#define _DT_BINDINGS_THERMAL_THERMAL_H
/* On cooling devices upper and lower limits */
#define THERMAL_NO_LIMIT (~0)
#endif

View File

@@ -1,88 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __DT_POWER_DELIVERY_H
#define __DT_POWER_DELIVERY_H
/* Power delivery Power Data Object definitions */
#define PDO_TYPE_FIXED 0
#define PDO_TYPE_BATT 1
#define PDO_TYPE_VAR 2
#define PDO_TYPE_APDO 3
#define PDO_TYPE_SHIFT 30
#define PDO_TYPE_MASK 0x3
#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT)
#define PDO_VOLT_MASK 0x3ff
#define PDO_CURR_MASK 0x3ff
#define PDO_PWR_MASK 0x3ff
#define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */
#define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */
#define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */
#define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */
#define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */
#define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */
#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */
#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */
#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)
#define PDO_FIXED(mv, ma, flags) \
(PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \
PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma))
#define VSAFE5V 5000 /* mv units */
#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */
#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */
#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */
#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)
#define PDO_BATT(min_mv, max_mv, max_mw) \
(PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \
PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw))
#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */
#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */
#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */
#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)
#define PDO_VAR(min_mv, max_mv, max_ma) \
(PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \
PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma))
#define APDO_TYPE_PPS 0
#define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */
#define PDO_APDO_TYPE_MASK 0x3
#define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT)
#define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */
#define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */
#define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */
#define PDO_PPS_APDO_VOLT_MASK 0xff
#define PDO_PPS_APDO_CURR_MASK 0x7f
#define PDO_PPS_APDO_MIN_VOLT(mv) \
((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
#define PDO_PPS_APDO_MAX_VOLT(mv) \
((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
#define PDO_PPS_APDO_MAX_CURR(ma) \
((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT)
#define PDO_PPS_APDO(min_mv, max_mv, max_ma) \
(PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) | \
PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) | \
PDO_PPS_APDO_MAX_CURR(max_ma))
#endif /* __DT_POWER_DELIVERY_H */