arm: dts: dm8x: Non-functional changes sync with v6.3-rc6

This is a collection of all the whitespace, renames, comment, and other
changes that should not change the DT functionality from Linux v6.3-rc6.

Signed-off-by: Andrew Davis <afd@ti.com>

arch/arm/dts/da850-evm.dts

@@ -265,7 +265,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";

arch/arm/dts/da850-lego-ev3.dts

@@ -22,7 +22,7 @@
 		stdout-path = &serial1;
 	};
 
-	memory {
+	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x04000000>;
 	};

arch/arm/dts/da850.dtsi

@@ -543,7 +543,7 @@
 			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
-		ecap0: ecap@306000 {
+		ecap0: pwm@306000 {
 			compatible = "ti,da850-ecap", "ti,am3352-ecap",
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
@@ -553,7 +553,7 @@
 			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap1: ecap@307000 {
+		ecap1: pwm@307000 {
 			compatible = "ti,da850-ecap", "ti,am3352-ecap",
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
@@ -563,7 +563,7 @@
 			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap2: ecap@308000 {
+		ecap2: pwm@308000 {
 			compatible = "ti,da850-ecap", "ti,am3352-ecap",
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;

arch/arm/dts/dm8168-evm.dts

@@ -116,19 +116,19 @@
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
@@ -139,7 +139,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "w25x32";
 		spi-max-frequency = <48000000>;
 		reg = <0>;

arch/arm/dts/dm816x.dtsi

@@ -63,8 +63,11 @@
 		ranges;
 
 		prcm: prcm@48180000 {
-			compatible = "ti,dm816-prcm";
+			compatible = "ti,dm816-prcm", "simple-bus";
 			reg = <0x48180000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48180000 0x4000>;
 
 			prcm_clocks: clocks {
 				#address-cells = <1>;
@@ -86,6 +89,8 @@
 			dm816x_pinmux: pinmux@800 {
 				compatible = "pinctrl-single";
 				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				#pinctrl-cells = <1>;
 				pinctrl-single,register-width = <16>;
 				pinctrl-single,function-mask = <0xf>;
@@ -121,6 +126,8 @@
 			};
 
 			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -228,7 +235,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
@@ -364,7 +371,7 @@
 			ti,timer-pwm;
 		};
 
-		uart1: uart@48020000 {
+		uart1: serial@48020000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
@@ -374,7 +381,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart2: uart@48022000 {
+		uart2: serial@48022000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
@@ -384,7 +391,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart3: uart@48024000 {
+		uart3: serial@48024000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;