doc: boards: amlogic: update documentation for JetHub J100
Improve documentation. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20230320114609.930145-7-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This commit is contained in:
Christian Hewitt
committed by
Neil Armstrong
Neil Armstrong
parent
be29982656
commit
430a94db7d
@@ -1,11 +1,10 @@
|
|||||||
.. SPDX-License-Identifier: GPL-2.0+
|
.. SPDX-License-Identifier: GPL-2.0+
|
||||||
|
|
||||||
U-Boot for JetHub J100
|
U-Boot for JetHub J100 (A113X)
|
||||||
=======================
|
==============================
|
||||||
|
|
||||||
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a series of home
|
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller device
|
||||||
automation controller manufactured by JetHome with the following
|
manufactured by JetHome with the following specifications:
|
||||||
specifications:
|
|
||||||
|
|
||||||
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
|
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
|
||||||
- no video out
|
- no video out
|
||||||
@@ -22,16 +21,15 @@ specifications:
|
|||||||
- DC source with a voltage of 9 to 56 V / Passive POE
|
- DC source with a voltage of 9 to 56 V / Passive POE
|
||||||
- DIN Rail Mounting case
|
- DIN Rail Mounting case
|
||||||
|
|
||||||
Basic version also has:
|
The basic version also has:
|
||||||
|
|
||||||
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
|
- TI CC2538 + CC2592 Zigbee Wireless with upto 20dBm output power and Zigbee 3.0
|
||||||
power and Zigbee 3.0 support.
|
|
||||||
- 1 x 1-Wire
|
- 1 x 1-Wire
|
||||||
- 2 x RS-485
|
- 2 x RS-485
|
||||||
- 4 x dry contact digital GPIO inputs
|
- 4 x dry contact digital GPIO inputs
|
||||||
- 3 x relay GPIO outputs
|
- 3 x relay GPIO outputs
|
||||||
|
|
||||||
U-Boot compilation
|
U-Boot Compilation
|
||||||
------------------
|
------------------
|
||||||
|
|
||||||
.. code-block:: bash
|
.. code-block:: bash
|
||||||
@@ -40,14 +38,21 @@ U-Boot compilation
|
|||||||
$ make jethub_j100_defconfig
|
$ make jethub_j100_defconfig
|
||||||
$ make
|
$ make
|
||||||
|
|
||||||
Image creation
|
U-Boot Signing with Pre-Built FIP repo
|
||||||
--------------
|
--------------------------------------
|
||||||
|
|
||||||
For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `jethub-j100`
|
.. code-block:: bash
|
||||||
|
|
||||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
$ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
|
||||||
to create the bootloader image, so it is necessary to obtain binaries
|
$ cd amlogic-boot-fip
|
||||||
from the git tree published by the board vendor:
|
$ mkdir my-output-dir
|
||||||
|
$ ./build-fip.sh jethub-j100 /path/to/u-boot/u-boot.bin my-output-dir
|
||||||
|
|
||||||
|
U-Boot Manual Signing
|
||||||
|
---------------------
|
||||||
|
|
||||||
|
Amlogic does not provide sources for the firmware and tools needed to create a bootloader
|
||||||
|
image so it is necessary to obtain binaries from sources published by the board vendor:
|
||||||
|
|
||||||
.. code-block:: bash
|
.. code-block:: bash
|
||||||
|
|
||||||
@@ -55,7 +60,7 @@ from the git tree published by the board vendor:
|
|||||||
$ cd jethub-u-boot
|
$ cd jethub-u-boot
|
||||||
$ export FIPDIR=$PWD
|
$ export FIPDIR=$PWD
|
||||||
|
|
||||||
Go back to mainline U-boot source tree then :
|
Go back to the mainline U-Boot source tree then:
|
||||||
|
|
||||||
.. code-block:: bash
|
.. code-block:: bash
|
||||||
|
|
||||||
@@ -90,27 +95,27 @@ Go back to mainline U-boot source tree then :
|
|||||||
bl2
|
bl2
|
||||||
|
|
||||||
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
|
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
|
||||||
--output fip/bl30_new.bin.enc \
|
--output fip/bl30_new.bin.enc \
|
||||||
--level v3 --type bl30
|
--level v3 --type bl30
|
||||||
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl31.img \
|
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl31.img \
|
||||||
--output fip/bl31.img.enc \
|
--output fip/bl31.img.enc \
|
||||||
--level v3 --type bl31
|
--level v3 --type bl31
|
||||||
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
|
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||||
--output fip/bl33.bin.enc \
|
--output fip/bl33.bin.enc \
|
||||||
--level v3 --type bl33
|
--level v3 --type bl33
|
||||||
$ $FIPDIR/j100/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
|
$ $FIPDIR/j100/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
|
||||||
--output fip/bl2.n.bin.sig
|
--output fip/bl2.n.bin.sig
|
||||||
$ $FIPDIR/j100/aml_encrypt_axg --bootmk \
|
$ $FIPDIR/j100/aml_encrypt_axg --bootmk \
|
||||||
--output fip/u-boot.bin \
|
--output fip/u-boot.bin \
|
||||||
--bl2 fip/bl2.n.bin.sig \
|
--bl2 fip/bl2.n.bin.sig \
|
||||||
--bl30 fip/bl30_new.bin.enc \
|
--bl30 fip/bl30_new.bin.enc \
|
||||||
--bl31 fip/bl31.img.enc \
|
--bl31 fip/bl31.img.enc \
|
||||||
--bl33 fip/bl33.bin.enc --level v3
|
--bl33 fip/bl33.bin.enc --level v3
|
||||||
|
|
||||||
and then write the image to eMMC with:
|
Then write U-Boot to SD or eMMC with:
|
||||||
|
|
||||||
.. code-block:: bash
|
.. code-block:: bash
|
||||||
|
|
||||||
$ DEV=/dev/your_emmc_device
|
$ DEV=/dev/boot_device
|
||||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
|
||||||
|
|||||||
Reference in New Issue
Block a user