imx8qxp: capricorn defconfig: collect common Kconfig options

Siemens have some defconfigs for different hardware versions,
all based on mainline cxg3 board. For easier updating the
downstream defconfigs, move common settings into new file.

configs/imx8qxp_capricorn.config

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>

board/siemens/capricorn/MAINTAINERS

@@ -9,4 +9,5 @@ F:	arch/arm/dts/imx8-capricorn-u-boot.dtsi
 F:	arch/arm/dts/imx8-capricorn.dtsi
 F:	board/siemens/capricorn/
 F:	configs/capricorn_cxg3_defconfig
+F:	configs/imx8qxp_capricorn.config
 F:	include/configs/capricorn-common.h

configs/capricorn_cxg3_defconfig

@@ -1,117 +1,13 @@
-CONFIG_ARM=y
+#include <configs/imx8qxp_capricorn.config>
-CONFIG_ARCH_IMX8=y
+
-CONFIG_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x200000
-CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
-CONFIG_TARGET_CAPRICORN=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x13e000
-CONFIG_SPL_TEXT_BASE=0x100000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x128000
-CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_SYS_LOAD_ADDR=0x80280000
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x202000
 CONFIG_IDENT_STRING=" ##v01.06"
-CONFIG_REMAKE_ELF=y
+
-# CONFIG_EFI_LOADER is not set
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_AUTOBOOT_KEYED_CTRLC=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2073
-CONFIG_LOG=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_MAX_SIZE=0x1f000
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_HAVE_INIT_STACK=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_WDT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_MMC_ENV_PART=2
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eth1"
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
+
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd"
-CONFIG_SPL_CLK=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
 CONFIG_MV88E61XX_SWITCH=y
 CONFIG_MV88E61XX_CPU_PORT=5
 CONFIG_MV88E61XX_PHY_PORTS=0x7
@@ -119,23 +15,3 @@ CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC_SHARE_MDIO=y
 CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
 CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PHY=y
-CONFIG_NOP_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_WDT=y
-CONFIG_WDT_SIEMENS_PMIC=y
-CONFIG_SPL_TINY_MEMSET=y

configs/imx8qxp_capricorn.config

@@ -0,0 +1,135 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_TEXT_BASE=0x80020000
+CONFIG_SYS_MALLOC_LEN=0x2800000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x200000
+CONFIG_ENV_OFFSET_REDUND=0x202000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_MMC_ENV_PART=2
+
+CONFIG_DM_GPIO=y
+
+CONFIG_TARGET_CAPRICORN=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x13e000
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x128000
+CONFIG_SPL_BSS_MAX_SIZE=0x1000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
+
+CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_BOOTDELAY=3
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2073
+CONFIG_LOG=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_CMD_CPU=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_BIND is not set
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+
+CONFIG_SPL_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd"
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+
+CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SCU_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SIEMENS_PMIC=y
+CONFIG_SPL_TINY_MEMSET=y