colin/u-boot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Move arch/ppc to arch/powerpc

Browse Source 
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>
This commit is contained in:
Stefan Roese
2010-04-15 16:07:28 +02:00
committed by Wolfgang Denk
parent 254ab7bd46
commit a47a12becf
579 changed files with 879 additions and 877 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
include/configs/aria.h
View File

@@ -190,7 +190,7 @@
/*
* Backward compatible definitions,
* so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c
* so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
*/
#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2)
#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3)

2
include/configs/galaxy5200.h
View File

@@ -141,7 +141,7 @@
#define CONFIG_SYS_FLASH_BASE 0xfe000000
/*
* The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this
* The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
* variable defined
*/
#define CONFIG_SYS_FLASH_SIZE 0x02000000

2
include/configs/kilauea.h
View File

@@ -230,7 +230,7 @@
* SDRAM Controller DDR autocalibration values and takes a lot longer
* to run than Method_B.
* (See the Method_A and Method_B algorithm discription in the file:
* arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
* arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
* Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
*
* DDR Autocalibration Method_B is the default.

2
include/configs/linkstation.h
View File

@@ -290,7 +290,7 @@
* taken from the orignal Linkstation boot code
*
* Most of the low level configuration setttings are normally used
* in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
* in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
* Low level initialisation is done in board/linkstation/early_init.S
* The values below are included for reference purpose only
*/

6
include/configs/quad100hd.h
View File

@@ -233,7 +233,7 @@
* Definitions for initial stack pointer and data area (in data cache)
*/
/* use on chip memory (OCM) for temperary stack until sdram is tested */
/* see ./arch/ppc/cpu/ppc4xx/start.S */
/* see ./arch/powerpc/cpu/ppc4xx/start.S */
#define CONFIG_SYS_TEMP_STACK_OCM 1
/* On Chip Memory location */
@@ -251,7 +251,7 @@
* Taken from PPCBoot board/icecube/icecube.h
*/
/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
#define CONFIG_SYS_EBC_PB0AP 0x04002480
/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000
@@ -269,7 +269,7 @@
*
* Taken in part from PPCBoot board/icecube/icecube.h
*/
/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
#define CONFIG_SYS_GPIO0_OSRH 0x55555550
#define CONFIG_SYS_GPIO0_OSRL 0x00000110
#define CONFIG_SYS_GPIO0_ISR1H 0x00000000

4
include/configs/sc3.h
View File

@@ -456,7 +456,7 @@
* - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
* - Stackpointer will be located to
* (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
* in arch/ppc/cpu/ppc4xx/start.S
* in arch/powerpc/cpu/ppc4xx/start.S
*/
#undef CONFIG_SYS_INIT_DCACHE_CS
@@ -495,7 +495,7 @@
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/* ################################################################################### */
/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
/* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */
/* This chip select accesses the boot device */

2
include/ns16550.h
View File

@@ -1,6 +1,6 @@
/*
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* originally from linux source (arch/powerpc/boot/ns16550.h)
*
* Cleanup and unification
* (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH