imx: Remove CFG_MXC_USB_PORTSC

The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW) can be removed from mx5/mx6/mx7/mx8m board config files as it is the default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c. Suggested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
2024-08-30 22:43:40 -03:00
parent 183c218a80
commit b16f6db637
60 changed files with 0 additions and 187 deletions
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -23,10 +23,6 @@

 /* Network */

-/* USB Configs */
-/* Host */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Framebuffer and LCD */

 /* Command definition */
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -411,9 +411,6 @@

 /* DMA stuff, needed for GPMI/MXS NAND support */

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* UBI support */

 #define CFG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
--- a/include/configs/brppt2.h
+++ b/include/configs/brppt2.h
@@ -78,7 +78,4 @@ BUR_COMMON_ENV \
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif	/* __CONFIG_BRPP2_IMX6_H */
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -95,7 +95,4 @@
 #define CFG_SYS_FSL_USDHC_NUM	2
 #endif

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif	/* __CONFIG_H */
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -134,9 +134,6 @@
 /* Ethernet */
 #define CFG_FEC_MXC_PHYADDR		0

-/* USB */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Boot */
 #define CFG_SYS_BOOTMAPSZ	        (8 << 20)

--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -117,10 +117,6 @@
 #define CFG_SYS_NAND_BASE		-1
 #endif

-/* USB Configs */
-
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* USB Device Firmware Update support */
 #define DFU_DEFAULT_POLL_TIMEOUT	300

--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -21,10 +21,6 @@
 #define CFG_SYS_FSL_ESDHC_ADDR	0
 #define CFG_SYS_FSL_USDHC_NUM	2

-/* USB Configs */
-/* Host */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Command definition */

 #define BOOT_TARGET_DEVICES(func) \
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -159,8 +159,4 @@
 #define CFG_SYS_NAND_BASE		0x40000000
 #endif

-/* USB Configs */
-
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif
--- a/include/configs/dart_6ul.h
+++ b/include/configs/dart_6ul.h
@@ -46,9 +46,6 @@
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define ENV_MMC \
 	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
 	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -30,9 +30,6 @@
 /* UART */
 #define CFG_MXC_UART_BASE		UART1_BASE

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* USB Gadget (DFU, UMS) */
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -287,5 +287,4 @@
 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 #endif

-#define CFG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 #endif /* __CONFIG_H */
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -17,9 +17,6 @@

 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR      0

--- a/include/configs/ge_b1x5v2.h
+++ b/include/configs/ge_b1x5v2.h
@@ -23,9 +23,6 @@
 #define CONSOLE_DEVICE "ttymxc2" /* Base board debug connector */
 #endif

-/* USB */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Memory */
 #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -18,9 +18,6 @@
 #define CFG_POWER_PFUZE100_I2C_ADDR	0x08
 #define CFG_POWER_LTC3676_I2C_ADDR  0x3c

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 #define CFG_SYS_SDRAM_BASE          PHYS_SDRAM
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -114,11 +114,6 @@
 #define CFG_SYS_NAND_BASE           0x40000000
 #define CFG_SYS_NAND_U_BOOT_START	CONFIG_TEXT_BASE

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 /* Falcon Mode */

 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@@ -42,9 +42,6 @@
 /* Ethernet */
 #define CFG_FEC_MXC_PHYADDR		1

-/* USB */
-#define CFG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Falcon */

 /* MMC support: args@1MB kernel@2MB */
--- a/include/configs/imx6q-bosch-acc.h
+++ b/include/configs/imx6q-bosch-acc.h
@@ -110,6 +110,5 @@
 #endif
 #endif

-#define CFG_MXC_USB_PORTSC            (PORT_PTS_UTMI | PORT_PTS_PTW)

 #endif /* __IMX6Q_ACC_H */
--- a/include/configs/imx7-cm.h
+++ b/include/configs/imx7-cm.h
@@ -77,7 +77,4 @@
 #define CFG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
 #define CFG_SYS_FSL_USDHC_NUM		2

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif	/* __CONFIG_H */
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -137,7 +137,4 @@

 #define CFG_FEC_MXC_PHYADDR		-1 /* Auto search of PHY on MII */

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif /*__IMX8MM_CL_IOT_GATE_H*/
--- a/include/configs/kontron-sl-mx6ul.h
+++ b/include/configs/kontron-sl-mx6ul.h
@@ -24,10 +24,6 @@
 /* Board and environment settings */
 #define CFG_MXC_UART_BASE		UART4_BASE

-#ifdef CONFIG_USB_EHCI_HCD
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 /* Boot order for distro boot */
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -24,10 +24,6 @@

 /* Board and environment settings */

-#ifdef CONFIG_USB_EHCI_HCD
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 /* GUID for capsule updatable firmware image */
 #define KONTRON_SL_MX8MM_FIT_IMAGE_GUID \
 	EFI_GUID(0xd488e45a, 0x4929, 0x4b55, 0x8c, 0x14, \
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -11,7 +11,6 @@
 #include <linux/sizes.h>

 /* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS	0

 /* Command definition */
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/configs/kp_imx6q_tpc.h
@@ -16,11 +16,6 @@

 /* FEC ethernet */

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #define CFG_EXTRA_ENV_SETTINGS	\
 	"console=ttymxc0,115200\0"	\
 	"fdt_addr=0x18000000\0"		\
--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@@ -93,11 +93,6 @@

 /* FLASH and environment organization */

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #ifdef CONFIG_CMD_NET
 #define CFG_FEC_ENET_DEV		0

--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -68,7 +68,6 @@
 * USB
 */
 #ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS		0
 #endif

--- a/include/configs/meerkat96.h
+++ b/include/configs/meerkat96.h
@@ -23,7 +23,4 @@

 /* Environment configs */

-/* USB configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -22,7 +22,6 @@
 /* bootz: zImage/initrd.img support */

 /* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS	0

 /* Command definition */
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -17,7 +17,6 @@
 #define CFG_SYS_FSL_ESDHC_ADDR	0

 /* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS	0

 /* PMIC Controller */
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -12,7 +12,6 @@
 #include <asm/arch/imx-regs.h>

 /* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS	0

 /* Command definition */
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -14,9 +14,6 @@
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

-/* USB */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 /* Command definition */

 #define CFG_MXC_UART_BASE	UART1_BASE
--- a/include/configs/mx6memcal.h
+++ b/include/configs/mx6memcal.h
@@ -31,6 +31,5 @@
 #define CFG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE       IRAM_SIZE

-#define CFG_MXC_USB_PORTSC	PORT_PTS_UTMI

 #endif	       /* __CONFIG_H */
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -11,9 +11,6 @@
 #define CFG_MXC_UART_BASE	UART4_BASE
 #define CONSOLE_DEV		"ttymxc3"

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define CFG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }

 #include "mx6sabre_common.h"
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -24,9 +24,4 @@
 #define CFG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #endif                         /* __MX6SABRESD_CONFIG_H */
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -88,11 +88,6 @@

 /* Environment organization */

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #define CFG_SYS_FSL_USDHC_NUM	3

 #endif				/* __CONFIG_H */
--- a/include/configs/mx6sllevk.h
+++ b/include/configs/mx6sllevk.h
@@ -92,10 +92,5 @@
 #define CFG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
 #define CFG_SYS_FSL_USDHC_NUM	3

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #include <linux/stringify.h>
 #endif				/* __CONFIG_H */
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -95,10 +95,6 @@
 #define IMX_FEC_BASE			ENET2_BASE_ADDR
 #define CFG_FEC_MXC_PHYADDR          0x0

-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #define CFG_SYS_FSL_USDHC_NUM	2

 #endif				/* __CONFIG_H */
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -117,10 +117,6 @@

 #define CFG_FEC_MXC_PHYADDR          0x1

-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #ifdef CONFIG_CMD_PCI
 #define CFG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(2, 0)
 #define CFG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -114,11 +114,6 @@

 /* environment organization */

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #ifdef CONFIG_CMD_NET
 #define CFG_FEC_ENET_DEV		1

--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -98,7 +98,4 @@
 /* DMA stuff, needed for GPMI/MXS NAND support */
 #endif

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif	/* __CONFIG_H */
--- a/include/configs/mx7ulp_com.h
+++ b/include/configs/mx7ulp_com.h
@@ -51,5 +51,4 @@
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	SZ_256K

-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #endif	/* __CONFIG_H */
--- a/include/configs/mys_6ulx.h
+++ b/include/configs/mys_6ulx.h
@@ -29,9 +29,6 @@
 /* NAND */
 #define CFG_SYS_NAND_BASE		0x40000000

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define CFG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc0,115200n8\0" \
 	"fdt_addr_r=0x82000000\0" \
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -18,9 +18,6 @@
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CFG_FEC_MXC_PHYADDR		6

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #ifdef CONFIG_CMD_MMC
 #define DISTRO_BOOT_DEV_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -51,11 +51,6 @@
 /* UART */
 #define CFG_MXC_UART_BASE		UART2_BASE

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 /* Extra U-Boot environment. */
 #define CFG_EXTRA_ENV_SETTINGS					\
 	"fdt_high=0xffffffff\0"						\
--- a/include/configs/npi_imx6ull.h
+++ b/include/configs/npi_imx6ull.h
@@ -28,9 +28,6 @@
 /* NAND */
 #define CFG_SYS_NAND_BASE		0x40000000

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #ifdef CONFIG_CMD_NET
 #define CFG_FEC_MXC_PHYADDR		0x1
 #endif
--- a/include/configs/o4-imx6ull-nano.h
+++ b/include/configs/o4-imx6ull-nano.h
@@ -11,10 +11,6 @@
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE

-#if IS_ENABLED(CONFIG_CMD_USB)
-#	define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif /* CONFIG_CMD_USB */
-
 #define CFG_EXTRA_ENV_SETTINGS \
 	"mmcdev=0\0" \
 	"mmcpart=2\0" \
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -17,11 +17,6 @@
 #define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE

-/* USB */
-#ifdef CONFIG_USB_EHCI_MX6
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 /* LCD */
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR

--- a/include/configs/pcl063.h
+++ b/include/configs/pcl063.h
@@ -41,9 +41,6 @@
 /* NAND */
 #define CFG_SYS_NAND_BASE		0x40000000

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define CFG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc0,115200n8\0" \
 	"fdt_addr_r=0x82000000\0" \
--- a/include/configs/pcl063_ull.h
+++ b/include/configs/pcl063_ull.h
@@ -43,9 +43,6 @@
 /* NAND */
 #define CFG_SYS_NAND_BASE		0x40000000

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define ENV_MMC \
 	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
 	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
--- a/include/configs/pico-imx6.h
+++ b/include/configs/pico-imx6.h
@@ -15,9 +15,6 @@
 /* MMC Configuration */
 #define CFG_SYS_FSL_ESDHC_ADDR	USDHC3_BASE_ADDR

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define DFU_DEFAULT_POLL_TIMEOUT 300

 #define CFG_DFU_ENV_SETTINGS \
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -21,9 +21,6 @@
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define DFU_DEFAULT_POLL_TIMEOUT 300

 #define CFG_DFU_ENV_SETTINGS \
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -105,7 +105,4 @@

 #define CFG_SYS_FSL_USDHC_NUM		2

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif
--- a/include/configs/somlabs_visionsom_6ull.h
+++ b/include/configs/somlabs_visionsom_6ull.h
@@ -59,11 +59,6 @@

 /* environment organization */

-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif
-
 #ifdef CONFIG_CMD_NET
 #define CFG_FEC_MXC_PHYADDR		0x1
 #endif
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -25,11 +25,6 @@
 #define CFG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #endif

-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#endif /* CONFIG_CMD_USB      */
-
 #define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -34,9 +34,6 @@
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR	0

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #if defined(CONFIG_TQMA6X_MMC_BOOT)

 #define TQMA6_UBOOT_OFFSET		SZ_1K
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -23,7 +23,6 @@
 #define CFG_SYS_FSL_ESDHC_ADDR	0

 /* USB */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS	0

 /* Linux boot */
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -63,7 +63,4 @@
 #define PHYS_SDRAM_2                 0x100000000
 #define PHYS_SDRAM_2_SIZE            (long)(SZ_1G)

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #endif /* __VERDIN_IMX8MM_H */
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -36,7 +36,6 @@
 /* Network */
 #define CFG_FEC_MXC_PHYADDR          0x0

-#define CFG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)

 #ifdef CONFIG_CMD_PCI
 #define CFG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(4, 6)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -16,9 +16,6 @@
 #define CFG_SYS_FSL_USDHC_NUM	2
 #define CFG_SYS_FSL_ESDHC_ADDR	0

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define CFG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc0\0" \
 	"splashpos=m,m\0" \
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -92,7 +92,6 @@

 #define CFG_SYS_FSL_USDHC_NUM	1

-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)

 /* USB Device Firmware Update support */
 #define DFU_DEFAULT_POLL_TIMEOUT	300
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -27,9 +27,6 @@

 /* Environment is in stored in the eMMC boot partition */

-/* USB Configs */
-#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-
 #define CFG_FEC_ENET_DEV		0
 #define CFG_FEC_MXC_PHYADDR          0x0