colin/u-boot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_USB_EHCI_TXFIFO_THRESH

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
2022-06-08 08:24:31 -04:00
parent 093044735f
commit d4ae15260b
7 changed files with 11 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
README
View File

@@ -793,9 +793,6 @@ The following options need to be configured:
Supported are USB Keyboards and USB Floppy drives
(TEAC FD-05PUB).
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
CONFIG_USB_DWC2_REG_ADDR the physical CPU address of the DWC2
HW module registers.

11
drivers/usb/host/Kconfig
View File

@@ -268,6 +268,17 @@ config USB_EHCI_FSL
select EHCI_HCD_INIT_AFTER_RESET
---help---
Enables support for the on-chip EHCI controller on FSL chips.
config USB_EHCI_TXFIFO_THRESH
hex
depends on USB_EHCI_TEGRA
default 0x10
help
This parameter affects a TXFILLTUNING field that controls how much
data is sent to the latency fifo before it is sent to the wire.
Without this parameter, the default (2) causes occasional Data Buffer
Errors in OUT packets depending on the buffer address and size.
endif # USB_EHCI_HCD
config USB_OHCI_HCD

3
include/configs/tegra114-common.h
View File

@@ -55,7 +55,4 @@
/* Defines for SPL */
/* For USB EHCI controller */
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA114_COMMON_H_ */

3
include/configs/tegra124-common.h
View File

@@ -57,9 +57,6 @@
/* Defines for SPL */
/* For USB EHCI controller */
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
/* GPU needs setup */
#define CONFIG_TEGRA_GPU

8
include/configs/tegra20-common.h
View File

@@ -69,12 +69,4 @@
#define TEGRA_LP0_VEC
#endif
/*
* This parameter affects a TXFILLTUNING field that controls how much data is
* sent to the latency fifo before it is sent to the wire. Without this
* parameter, the default (2) causes occasional Data Buffer Errors in OUT
* packets depending on the buffer address and size.
*/
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA20_COMMON_H_ */

3
include/configs/tegra210-common.h
View File

@@ -46,9 +46,6 @@
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83420000\0"
/* For USB EHCI controller */
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
/* GPU needs setup */
#define CONFIG_TEGRA_GPU

3
include/configs/tegra30-common.h
View File

@@ -52,7 +52,4 @@
/* Defines for SPL */
/* For USB EHCI controller */
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA30_COMMON_H_ */