spl: Add an SPL_HAVE_INIT_STACK option

At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.

Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]

arch/arm/cpu/armv7/lowlevel_init.S

@@ -26,7 +26,7 @@ WEAK(lowlevel_init)
 	/*
 	 * Setup a temporary stack. Global data is not available yet.
 	 */
-#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_HAVE_INIT_STACK)
 	ldr	sp, =CONFIG_SPL_STACK
 #else
 	ldr	sp, =SYS_INIT_SP_ADDR

arch/arm/cpu/armv7/start.S

@@ -279,7 +279,7 @@ ENTRY(cpu_init_cp15)
 	orr	r2, r4, r2		@ r2 has combined CPU variant + revision
 
 /* Early stack for ERRATA that needs into call C code */
-#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_HAVE_INIT_STACK)
 	ldr	r0, =(CONFIG_SPL_STACK)
 #else
 	ldr	r0, =(SYS_INIT_SP_ADDR)

arch/arm/lib/crt0.S

@@ -102,7 +102,7 @@ ENTRY(_main)
 
 #if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_HAVE_INIT_STACK)
 	ldr	r0, =(CONFIG_TPL_STACK)
-#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK)
+#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_HAVE_INIT_STACK)
 	ldr	r0, =(CONFIG_SPL_STACK)
 #else
 	ldr	r0, =(SYS_INIT_SP_ADDR)

arch/arm/lib/crt0_64.S

@@ -71,7 +71,7 @@ ENTRY(_main)
  */
 #if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_HAVE_INIT_STACK)
 	ldr	x0, =(CONFIG_TPL_STACK)
-#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK)
+#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_HAVE_INIT_STACK)
 	ldr	x0, =(CONFIG_SPL_STACK)
 #elif defined(CONFIG_INIT_SP_RELATIVE)
 #if CONFIG_POSITION_INDEPENDENT

arch/riscv/cpu/start.S

@@ -90,7 +90,7 @@ _start:
  * Set stackpointer in internal/ex RAM to call board_init_f
  */
 call_board_init_f:
-#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_HAVE_INIT_STACK)
 	li	t0, CONFIG_SPL_STACK
 #else
 	li	t0, SYS_INIT_SP_ADDR

common/spl/Kconfig

@@ -387,11 +387,29 @@ config SPL_SHARES_INIT_SP_ADDR
 	  both SPL and U-Boot itself.  If you need to specify a different address
 	  however, say N here and then set a different value in CONFIG_SPL_STACK.
 
-config SPL_STACK
+config SPL_HAVE_INIT_STACK
-	hex "Initial stack pointer location"
+	bool "SPL requires a initial, fixed, stack-pointer location"
 	depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && \
 		SPL_FRAMEWORK || ROCKCHIP_RK3036
 	depends on !SPL_SHARES_INIT_SP_ADDR
+	default y if ARCH_MX7
+	default y if ARCH_MX6 && MX6_OCRAM_256KB
+	default y if ARCH_MX6 && !MX6_OCRAM_256KB
+	default y if MACH_SUN50I_H6 || MACH_SUN50I_H616 || MACH_SUN8I_R528
+	default y if MACH_SUN50I || MACH_SUN50I_H5
+	default y if MACH_SUN9I
+	default y if ARCH_SUNXI
+	default y if ARCH_SC5XX && (SC59X_64 || SC59X)
+	default y if ARCH_SC5XX && SC58X
+	default y if ARCH_SC5XX && SC57X
+	help
+	  Enable if the SPL phase should not use inherit its initial
+	  stack-pointer from the settings for U-Boot proper, but should set
+	  its own value.
+
+config SPL_STACK
+	hex "Address of the initial stack-pointer for the SPL phase"
+	depends on SPL_HAVE_INIT_STACK
 	default 0x946bb8 if ARCH_MX7
 	default 0x93ffb8 if ARCH_MX6 && MX6_OCRAM_256KB
 	default 0x91ffb8 if ARCH_MX6 && !MX6_OCRAM_256KB
@@ -401,9 +419,9 @@ config SPL_STACK
 	default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5
 	default 0x18000 if MACH_SUN9I
 	default 0x8000 if ARCH_SUNXI
-	default 0x200E4000 if ARCH_SC5XX && (SC59X_64 || SC59X)
+	default 0x200e4000 if ARCH_SC5XX && (SC59X_64 || SC59X)
-	default 0x200B0000 if ARCH_SC5XX && SC58X
+	default 0x200b0000 if ARCH_SC5XX && SC58X
-	default 0x200D0000 if ARCH_SC5XX && SC57X
+	default 0x200d0000 if ARCH_SC5XX && SC57X
 	help
 	  Address of the start of the stack SPL will use before SDRAM is
 	  initialized.

configs/alt_defconfig

@@ -14,6 +14,7 @@ CONFIG_ARCH_RENESAS_BOARD_STRING="Alt"
 CONFIG_R8A7794=y
 CONFIG_TARGET_ALT=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL=y

configs/apalis-tk1_defconfig

@@ -31,6 +31,7 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/apalis_t30_defconfig

@@ -26,6 +26,7 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/axm_defconfig

@@ -45,6 +45,7 @@ CONFIG_SPL_PAD_TO=0x20000
 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20ba0000

configs/beaver_defconfig

@@ -22,6 +22,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/bitmain_antminer_s9_defconfig

@@ -37,6 +37,7 @@ CONFIG_SYS_PBSIZE=2075
 CONFIG_CLOCKS=y
 CONFIG_SPL_MAX_SIZE=0x30000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000
 CONFIG_HUSH_PARSER=y

configs/capricorn_cxg3_defconfig

@@ -52,6 +52,7 @@ CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000

configs/cardhu_defconfig

@@ -22,6 +22,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/cei-tk1-som_defconfig

@@ -25,6 +25,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/cgtqmx8_defconfig

@@ -40,6 +40,7 @@ CONFIG_SPL_MAX_SIZE=0x1f000
 # CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000

configs/chromebit_mickey_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y

configs/chromebook_jerry_defconfig

@@ -38,6 +38,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y

configs/chromebook_minnie_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y

configs/chromebook_speedy_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y

configs/ci20_mmc_defconfig

@@ -31,6 +31,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SYS_MALLOC_BOOTPARAMS=y
 CONFIG_SPL_MAX_SIZE=0x2e00
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 # CONFIG_SPL_BANNER_PRINT is not set
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1c

configs/clearfog_defconfig

@@ -34,6 +34,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y

configs/clearfog_sata_defconfig

@@ -34,6 +34,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y

configs/clearfog_spi_defconfig

@@ -34,6 +34,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y

configs/colibri_t20_defconfig

@@ -24,6 +24,7 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000

configs/colibri_t30_defconfig

@@ -25,6 +25,7 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/controlcenterdc_defconfig

@@ -44,6 +44,7 @@ CONFIG_SPL_MAX_SIZE=0x27fd0
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=32

configs/corvus_defconfig

@@ -41,6 +41,7 @@ CONFIG_SPL_MAX_SIZE=0x3000
 CONFIG_SPL_PAD_TO=0x20000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y

configs/da850evm_defconfig

@@ -46,6 +46,7 @@ CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0f70000

configs/da850evm_nand_defconfig

@@ -42,6 +42,7 @@ CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0f70000

configs/dalmore_defconfig

@@ -21,6 +21,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/db-88f6720_defconfig

@@ -32,6 +32,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x1ffd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_I2C=y

configs/db-88f6820-amc_defconfig

@@ -35,6 +35,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=96
 CONFIG_CMD_I2C=y

configs/db-88f6820-amc_nand_defconfig

@@ -37,6 +37,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=96
 CONFIG_CMD_I2C=y

configs/db-88f6820-gp_defconfig

@@ -33,6 +33,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_I2C=y

configs/db-mv784mp-gp_defconfig

@@ -33,6 +33,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x1bfd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_I2C=y

configs/ds116_defconfig

@@ -40,6 +40,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PROMPT="DS116> "
 CONFIG_SYS_MAXARGS=32

configs/ds414_defconfig

@@ -40,6 +40,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x1bfd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PROMPT="DS414> "
 CONFIG_SYS_MAXARGS=32

configs/endeavoru_defconfig

@@ -26,6 +26,7 @@ CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/evb-px5_defconfig

@@ -44,6 +44,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_TPL=y

configs/evb-rk3036_defconfig

@@ -29,6 +29,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/evb-rk3288_defconfig

@@ -36,6 +36,7 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_OPTEE_IMAGE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

configs/gardena-smart-gateway-at91sam_defconfig

@@ -44,6 +44,7 @@ CONFIG_SPL_MAX_SIZE=0x7000
 CONFIG_SPL_PAD_TO=0x40000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_NAND_SUPPORT=y

configs/gose_defconfig

@@ -14,6 +14,7 @@ CONFIG_ARCH_RENESAS_BOARD_STRING="Gose"
 CONFIG_R8A7793=y
 CONFIG_TARGET_GOSE=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL=y

configs/grouper_defconfig

@@ -26,6 +26,7 @@ CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/harmony_defconfig

@@ -19,6 +19,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000

configs/helios4_defconfig

@@ -34,6 +34,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y

configs/ideapad-yoga-11_defconfig

@@ -24,6 +24,7 @@ CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/imx28_xea_defconfig

@@ -49,6 +49,7 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y

configs/imx8mm-cl-iot-gate-optee_defconfig

@@ -38,6 +38,7 @@ CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm-cl-iot-gate_defconfig

@@ -40,6 +40,7 @@ CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm-icore-mx8mm-ctouch2_defconfig

@@ -32,6 +32,7 @@ CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm-icore-mx8mm-edimm2.2_defconfig

@@ -32,6 +32,7 @@ CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm-mx8menlo_defconfig

@@ -48,6 +48,7 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm-phygate-tauri-l_defconfig

@@ -34,6 +34,7 @@ CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_beacon_defconfig

@@ -34,6 +34,7 @@ CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_beacon_fspi_defconfig

@@ -37,6 +37,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_data_modul_edm_sbc_defconfig

@@ -30,6 +30,7 @@ CONFIG_SPL_DM_USB=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_TEXT_BASE=0x7E1000

configs/imx8mm_evk_defconfig

@@ -31,6 +31,7 @@ CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_evk_fspi_defconfig

@@ -36,6 +36,7 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_phg_defconfig

@@ -32,6 +32,7 @@ CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mm_venice_defconfig

@@ -41,6 +41,7 @@ CONFIG_SYS_PBSIZE=2074
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_beacon_2g_defconfig

@@ -44,6 +44,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_beacon_defconfig

@@ -43,6 +43,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_beacon_fspi_defconfig

@@ -43,6 +43,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_bsh_smm_s2_defconfig

@@ -38,6 +38,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_bsh_smm_s2pro_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_ddr4_evk_defconfig

@@ -37,6 +37,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_evk_defconfig

@@ -40,6 +40,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_var_som_defconfig

@@ -42,6 +42,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mn_venice_defconfig

@@ -42,6 +42,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp-icore-mx8mp-edimm2.2_defconfig

@@ -40,6 +40,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp_beacon_defconfig

@@ -49,6 +49,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp_data_modul_edm_sbc_defconfig

@@ -37,6 +37,7 @@ CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_STACK=0x96fc00
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_TEXT_BASE=0x920000

configs/imx8mp_debix_model_a_defconfig

@@ -37,6 +37,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y

configs/imx8mp_dhsom.config

@@ -41,6 +41,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
 CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
 CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_STACK=0x96fc00
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_TEXT_BASE=0x920000

configs/imx8mp_evk_defconfig

@@ -37,6 +37,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp_navqp_defconfig

@@ -36,6 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y

configs/imx8mp_rsb3720a1_4G_defconfig

@@ -54,6 +54,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp_rsb3720a1_6G_defconfig

@@ -54,6 +54,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mp_venice_defconfig

@@ -44,6 +44,7 @@ CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mq_cm_defconfig

@@ -36,6 +36,7 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x1f000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mq_evk_defconfig

@@ -39,6 +39,7 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x1f000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mq_phanbell_defconfig

@@ -39,6 +39,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0x2b000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8mq_reform2_defconfig

@@ -41,6 +41,7 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x1f000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000

configs/imx8qm_dmsse20a1_defconfig

@@ -43,6 +43,7 @@ CONFIG_SPL_MAX_SIZE=0x1f000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000

configs/imx8qm_mek_defconfig

@@ -45,6 +45,7 @@ CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000

configs/imx8qxp_mek_defconfig

@@ -46,6 +46,7 @@ CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000

configs/imx8ulp_evk_defconfig

@@ -40,6 +40,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx8ulp/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x22040000

configs/imx91_11x11_evk_defconfig

@@ -43,6 +43,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000

configs/imx91_11x11_evk_inline_ecc_defconfig

@@ -43,6 +43,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000

configs/imx93-phycore_defconfig

@@ -46,6 +46,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y

configs/imx93_11x11_evk_defconfig

@@ -38,6 +38,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000

configs/imx93_9x9_qsb_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000

configs/imx93_9x9_qsb_inline_ecc_defconfig

@@ -39,6 +39,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000

configs/imx93_var_som_defconfig

@@ -45,6 +45,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y

configs/jetson-tk1_defconfig

@@ -24,6 +24,7 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000

configs/k2e_evm_defconfig

@@ -36,6 +36,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0xfff8
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x8000
 CONFIG_SPL_I2C=y

configs/k2g_evm_defconfig

@@ -36,6 +36,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0xfff8
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x8000
 CONFIG_SPL_I2C=y

configs/k2hk_evm_defconfig

@@ -36,6 +36,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0xfff8
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x8000
 CONFIG_SPL_I2C=y