ARM: mx6: Add support for Kosagi Novena
Add support for the Kosagi Novena board. Currently supported are: - I2C busses - FEC Ethernet - MMC0, MMC1, Booting from MMC - SATA - USB ports - USB Ethernet Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Nikolay Dimitrov <picmaster@mail.bg> Reviewed-by: Nikolay Dimitrov <picmaster@mail.bg>
This commit is contained in:
Marek Vasut
committed by
Stefano Babic
Stefano Babic
parent
9df4757718
commit
f91c09acf5
@@ -27,7 +27,7 @@
|
||||
#define CONFIG_SYS_THUMB_BUILD
|
||||
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
|
||||
#define CONFIG_SPL_TEXT_BASE 0x00908000
|
||||
#define CONFIG_SPL_MAX_SIZE (64 * 1024)
|
||||
#define CONFIG_SPL_MAX_SIZE 0x10000
|
||||
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7"
|
||||
#define CONFIG_SPL_STACK 0x0091FFB8
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
|
||||
298
include/configs/novena.h
Normal file
298
include/configs/novena.h
Normal file
@@ -0,0 +1,298 @@
|
||||
/*
|
||||
* Configuration settings for the Novena U-boot.
|
||||
*
|
||||
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* System configurations */
|
||||
#define CONFIG_MX6
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_MISC_INIT_R
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_FAT_WRITE
|
||||
#define CONFIG_FIT
|
||||
#define CONFIG_KEYBOARD
|
||||
#define CONFIG_MXC_GPIO
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_REGEX
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#include "configs/mx6_common.h"
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/imx-common/gpio.h>
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
/* U-Boot Commands */
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_BMODE
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_EXT4
|
||||
#define CONFIG_CMD_EXT4_WRITE
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_FS_GENERIC
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_FUSE
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SATA
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
#define CONFIG_CMD_TIME
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_VIDEO
|
||||
|
||||
/* U-Boot general configurations */
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
/* Print buffer size */
|
||||
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
/* Boot argument buffer size */
|
||||
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
|
||||
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
|
||||
#define CONFIG_CMDLINE_EDITING /* Command history etc */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* U-Boot environment */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_ENV_SIZE (16 * 1024)
|
||||
/*
|
||||
* Environment is on MMC, starting at offset 512KiB from start of the card.
|
||||
* Please place first partition at offset 1MiB from the start of the card
|
||||
* as recommended by GNU/fdisk. See below for details:
|
||||
* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
|
||||
*/
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_ENV_OFFSET (512 * 1024)
|
||||
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
||||
#define CONFIG_ENV_OFFSET_REDUND \
|
||||
(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
|
||||
/* Booting Linux */
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
#define CONFIG_BOOTFILE "fitImage"
|
||||
#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
|
||||
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
||||
#define CONFIG_LOADADDR 0x18000000
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_HOSTNAME novena
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
#define PHYS_SDRAM_SIZE 0xF0000000
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x20000000
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_FAT_SUPPORT
|
||||
#define CONFIG_SPL_MMC_SUPPORT
|
||||
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/* Ethernet Configuration */
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_FEC_MXC
|
||||
#define CONFIG_MII
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_XCV_TYPE RGMII
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x7
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_MICREL
|
||||
#define CONFIG_PHY_MICREL_KSZ9021
|
||||
#define CONFIG_ARP_TIMEOUT 200UL
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_I2C_MULTI_BUS
|
||||
#define CONFIG_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
|
||||
/* I2C EEPROM */
|
||||
#ifdef CONFIG_CMD_EEPROM
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CONFIG_SYS_SPD_BUS_NUM 2
|
||||
#endif
|
||||
|
||||
/* MMC Configs */
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_BOUNCE_BUFFER
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#endif
|
||||
|
||||
/* OCOTP Configs */
|
||||
#ifdef CONFIG_CMD_FUSE
|
||||
#define CONFIG_MXC_OCOTP
|
||||
#endif
|
||||
|
||||
/* PCI express */
|
||||
#ifdef CONFIG_CMD_PCI
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_PCI_PNP
|
||||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#define CONFIG_PCIE_IMX
|
||||
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
|
||||
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
|
||||
#endif
|
||||
|
||||
/* PMIC */
|
||||
#define CONFIG_POWER
|
||||
#define CONFIG_POWER_I2C
|
||||
#define CONFIG_POWER_PFUZE100
|
||||
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
|
||||
|
||||
/* SATA Configs */
|
||||
#ifdef CONFIG_CMD_SATA
|
||||
#define CONFIG_DWC_AHSATA
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
||||
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
||||
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
||||
#define CONFIG_LBA48
|
||||
#define CONFIG_LIBATA
|
||||
#endif
|
||||
|
||||
/* UART */
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_MXC_UART_BASE UART2_BASE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
|
||||
/* USB Configs */
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX6
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_KEYBOARD
|
||||
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
/* Gadget part */
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_ETHER
|
||||
#define CONFIG_USB_ETH_CDC
|
||||
#define CONFIG_NETCONSOLE
|
||||
#endif
|
||||
|
||||
/* Video output */
|
||||
#ifdef CONFIG_VIDEO
|
||||
#define CONFIG_VIDEO
|
||||
#define CONFIG_VIDEO_IPUV3
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#define CONFIG_VIDEO_BMP_RLE8
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_BMP_16BPP
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_IPUV3_CLK 260000000
|
||||
#define CONFIG_CMD_HDMIDETECT
|
||||
#define CONFIG_CONSOLE_MUX
|
||||
#define CONFIG_IMX_HDMI
|
||||
#define CONFIG_IMX_VIDEO_SKIP
|
||||
#endif
|
||||
|
||||
/* Extra U-Boot environment. */
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"consdev=ttymxc1\0" \
|
||||
"baudrate=115200\0" \
|
||||
"bootdev=/dev/mmcblk0p1\0" \
|
||||
"rootdev=/dev/mmcblk0p2\0" \
|
||||
"netdev=eth0\0" \
|
||||
"kernel_addr_r=0x18000000\0" \
|
||||
"addcons=" \
|
||||
"setenv bootargs ${bootargs} " \
|
||||
"console=${consdev},${baudrate}\0" \
|
||||
"addip=" \
|
||||
"setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
||||
"${netmask}:${hostname}:${netdev}:off\0" \
|
||||
"addmisc=" \
|
||||
"setenv bootargs ${bootargs} ${miscargs}\0" \
|
||||
"addargs=run addcons addmisc\0" \
|
||||
"mmcload=" \
|
||||
"mmc rescan ; " \
|
||||
"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
|
||||
"netload=" \
|
||||
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
|
||||
"miscargs=nohlt panic=1\0" \
|
||||
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
|
||||
"nfsargs=" \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
|
||||
"mmc_mmc=" \
|
||||
"run mmcload mmcargs addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"mmc_nfs=" \
|
||||
"run mmcload nfsargs addip addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"net_mmc=" \
|
||||
"run netload mmcargs addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"net_nfs=" \
|
||||
"run netload nfsargs addip addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"update_sd_spl_filename=SPL\0" \
|
||||
"update_sd_uboot_filename=u-boot.img\0" \
|
||||
"update_sd_firmware=" /* Update the SD firmware partition */ \
|
||||
"if mmc rescan ; then " \
|
||||
"if dhcp ${update_sd_spl_filename} ; then " \
|
||||
"mmc write ${loadaddr} 2 0x200 ; " \
|
||||
"fi ; " \
|
||||
"if dhcp ${update_sd_uboot_filename} ; then " \
|
||||
"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
|
||||
"fi ; " \
|
||||
"fi\0" \
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Reference in New Issue
Block a user