Convert ISO-8859 files to UTF-8

There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
This commit is contained in:
Albert ARIBAUD
2011-08-04 18:45:45 +02:00
committed by Wolfgang Denk
parent eccfb49046
commit fa82f871c8
100 changed files with 184 additions and 184 deletions

View File

@@ -74,7 +74,7 @@ Joe D'Abbraccio <ljd015@freescale.com>
MPC837xERDB MPC837x
K<EFBFBD>ri Dav<EFBFBD><EFBFBD>sson <kd@flaga.is>
Kári Davíðsson <kd@flaga.is>
FLAGADM MPC823
@@ -601,7 +601,7 @@ Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS
Andreas Bie<EFBFBD>mann <andreas.devel@gmail.com>
Andreas Bießmann <andreas.devel@gmail.com>
at91rm9200ek at91rm9200
grasshopper avr32
@@ -664,7 +664,7 @@ Simon Guinot <simon.guinot@sequanux.org>
netspace_v2 ARM926EJS (Kirkwood SoC)
netspace_max_v2 ARM926EJS (Kirkwood SoC)
Marius Gr<EFBFBD>ger <mag@sysgo.de>
Marius Gröger <mag@sysgo.de>
impa7 ARM720T (EP7211)
ep7312 ARM720T (EP7312)
@@ -752,7 +752,7 @@ Nishanth Menon <nm@ti.com>
omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC)
omap3_zoom1 ARM ARMV7 (OMAP3xx SoC)
David M<EFBFBD>ller <d.mueller@elsoft.ch>
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
VCMA9 ARM920T
@@ -910,7 +910,7 @@ Richard Woodruff <r-woodruff2@ti.com>
omap2420h4 ARM1136EJS
Alex Z<EFBFBD>pke <azu@sysgo.de>
Alex Züpke <azu@sysgo.de>
lart SA1100
dnp1110 SA1110

View File

@@ -3,8 +3,8 @@
*
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM720 CPU-core
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM920 CPU-core
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1510 from ARM920 code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@@ -975,7 +975,7 @@ typedef struct
* @li 1 - Generate HEC.
* @li 0 - Disable HEC generation.
*/
unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR<EFBFBD>ed with the value 0x55 before
unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
* being presented on the Utopia bus.
* @li 1 - Enable HEC ExOR with value 0x55
* @li 0 - Use generated HEC value.
@@ -1302,7 +1302,7 @@ typedef struct
@li 1 - HEC checking enabled
@li 0 - HEC checking disabled */
unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR<EFBFBD>ed with the value 0x55
unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
before being tested with the received HEC.
@li 1 - Enable HEC ExOR with value 0x55.
@li 0 - Use generated HEC value.*/
@@ -1320,9 +1320,9 @@ typedef struct
unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be
included in the Hash data input or if the bits should be padded
with 1<EFBFBD>b0.
with 1'b0.
@li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
@li 0 - VPI [11:8]/GFC field padded with 1<EFBFBD>b0 */
@li 0 - VPI [11:8]/GFC field padded with 1'b0 */
unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
incoming cell data should be pre-hashed to allow VPI/VCI header look-up
@@ -1489,7 +1489,7 @@ typedef struct
unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
register overflows.
@li 1 - CBI Receive Status Condition asserted.
@li<EFBFBD>0 - No CBI Receive Status asserted */
@li 0 - No CBI Receive Status asserted */
unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
@li 1 - CBI Receive Condition asserted.
@@ -1679,7 +1679,7 @@ typedef struct
unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
* @li Note: All transmit configuration and status registers will be reset
* to their reset values.
* @li 0 - Normal operating mode<EFBFBD>
* @li 0 - Normal operating mode
* @li 1 - Reset transmit modules
*/

View File

@@ -250,7 +250,7 @@ PUBLIC void ixOsalIrqUnlock (UINT32 irqEnable);
*
* @brief Selectively disables interrupts
*
* @param irqLevel <EFBFBD> new interrupt level
* @param irqLevel - new interrupt level
*
* Disables the interrupts below the specified interrupt level
*
@@ -269,7 +269,7 @@ PUBLIC UINT32 ixOsalIrqLevelSet (UINT32 irqLevel);
*
* @brief Enables an interrupt level
*
* @param irqLevel <EFBFBD> interrupt level to enable
* @param irqLevel - interrupt level to enable
*
* Enables the specified interrupt level
*
@@ -285,7 +285,7 @@ PUBLIC void ixOsalIrqEnable (UINT32 irqLevel);
*
* @brief Disables an interrupt level
*
* @param irqLevel <EFBFBD> interrupt level to disable
* @param irqLevel - interrupt level to disable
*
* Disables the specified interrupt level
*

View File

@@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM920 CPU-core
*
* Copyright (c) 2001 Marius Gr<EFBFBD>ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this

View File

@@ -4,7 +4,7 @@
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
* Copyright (c) 2001 Alex Z<EFBFBD>pke <azu@sysgo.de>
* Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David M<EFBFBD>ller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David M<EFBFBD>ller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David M<EFBFBD>ller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -182,7 +182,7 @@ void cpu_init_f (volatile immap_t * immr)
#endif
/* now restrict to preliminary range */
/* the PS came from the HRCW, don<EFBFBD>t change it */
/* the PS came from the HRCW, don't change it */
memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;

View File

@@ -20,7 +20,7 @@
*
* Adapted for U-Boot:
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
* (C) Copyright 2008, Daniel Hellstr<EFBFBD>m, daniel@gaisler.com
* (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
* Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
* Added cache flushes where needed.
*

View File

@@ -3,7 +3,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@@ -1,6 +1,6 @@
#
# (C) Copyright 2002
# Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* Portions of this file are derived from the Linux kernel source
* Copyright (C) 1991, 1992 Linus Torvalds
@@ -246,7 +246,7 @@ void irq_llsr(struct irq_regs *regs)
{
/*
* For detailed description of each exception, refer to:
* Intel<EFBFBD> 64 and IA-32 Architectures Software Developer's Manual
* Intel® 64 and IA-32 Architectures Software Developer's Manual
* Volume 1: Basic Architecture
* Order Number: 253665-029US, November 2008
* Table 6-1. Exceptions and Interrupts

View File

@@ -2,7 +2,7 @@
* U-boot - x86 Startup Code
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -6,7 +6,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -5,7 +5,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -5,7 +5,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002,2003
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, graeme.russ@gmail.com
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -2,7 +2,7 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>

View File

@@ -12,7 +12,7 @@
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2001
* Josh Huber, Mission Critical Linux, Inc, <huber@mclx.com>
@@ -43,7 +43,7 @@
* Daniel Hellstrom, Detlev Zundel, Wolfgang Denk and Josh Huber are
* credited for the corresponding work on those ports. The original
* interrupt handling routines for the x86 port were written by
* Daniel Engstr<EFBFBD>m
* Daniel Engström
*/
#include <common.h>

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -386,7 +386,7 @@ TCP: Hash tables configured (established 1024 bind 1024)
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 44k in<EFBFBD>
Freeing unused kernel memory: 44k init
init started: BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
Configuring lo...
Configuring eth0...

View File

@@ -35,7 +35,7 @@
/*******************************************************************************
* memoryGetBankBaseAddress - Returns the base address of a memory bank.
* DESCRIPTION:
* This function returns the base address of one of the SDRAM<EFBFBD>s memory
* This function returns the base address of one of the SDRAM's memory
* banks. There are 4 memory banks and each one represents one DIMM side.
* INPUT:
* MEMORY_BANK bank - Selects one of the four banks as defined in Memory.h.
@@ -366,8 +366,8 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
* This function sets new base and size for one the memory banks
* (CS0 - CS3). It is the programmer`s responsibility to make sure that
* there are no conflicts with other memory spaces. When two memory spaces
* overlap, the MV<EFBFBD>s behavior is not defined .If a bank needs to be closed,
* set the <EFBFBD>bankLength<EFBFBD> parameter size to 0x0.
* overlap, the MV's behavior is not defined .If a bank needs to be closed,
* set the 'bankLength' parameter size to 0x0.
*
* INPUT:
* bank - One of the memory banks (CS0-CS3) as defined in gtMemory.h.
@@ -375,7 +375,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
* bankLength - The memory bank size. This function will decrement the
* 'bankLength' parameter by one and then check if the size is
* valid. A valid size must be programed from LSB to MSB as
* sequence of <EFBFBD>1<EFBFBD>s followed by sequence of <EFBFBD>0<EFBFBD>s.
* sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
* NOTE!!!
* The size must be in 64Kbyte granularity.
@@ -487,7 +487,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
* This function sets new base and size for one the device windows
* (DEV_CS0 - DEV_CS3). It is the programmer`s responsibility to make sure
* that there are no conflicts with other memory spaces. When two memory
* spaces overlap, the MV<EFBFBD>s behavior is not defined .If a device window
* spaces overlap, the MV's behavior is not defined .If a device window
* needs to be closed, set the 'deviceLength' parameter size to 0x0.
*
* INPUT:
@@ -497,8 +497,8 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
* deviceLength - The device window size. This function will decrement
* the 'deviceLength' parameter by one and then
* check if the size is valid. A valid size must be
* programed from LSB to MSB as sequence of <EFBFBD>1<EFBFBD>s
* followed by sequence of <EFBFBD>0<EFBFBD>s.
* programed from LSB to MSB as sequence of '1's
* followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!
@@ -604,7 +604,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
* This function sets new base and size for one the PCI windows
* (PCI memory0/1/2..). It is the programmer`s responsibility to make sure
* that there are no conflicts with other memory spaces. When two memory
* spaces overlap, the MV<EFBFBD>s behavior is not defined .If a PCI window
* spaces overlap, the MV's behavior is not defined. If a PCI window
* needs to be closed, set the 'pciWindowSize' parameter size to 0x0.
*
* INPUT:
@@ -613,7 +613,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
* pciWindowSize - The PCI window size. This function will decrement the
* 'pciWindowSize' parameter by one and then check if the
* size is valid. A valid size must be programed from LSB
* to MSB as sequence of <EFBFBD>1<EFBFBD>s followed by sequence of <EFBFBD>0<EFBFBD>s.
* to MSB as sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!
@@ -718,14 +718,14 @@ bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
* registers memory space.
*
* DESCRIPTION:
* This function set new base address for the internal register<EFBFBD>s memory
* This function set new base address for the internal registers memory
* space (the size is fixed and cannot be modified). The function does not
* handle overlapping with other memory spaces, it is the programer's
* responsibility to ensure that overlapping does not occur.
* When two memory spaces overlap, the MV<EFBFBD>s behavior is not defined.
* When two memory spaces overlap, the MV's behavior is not defined.
*
* INPUT:
* internalRegBase - new base address for the internal register<EFBFBD>s memory
* internalRegBase - new base address for the internal registers memory
* space.
*
* OUTPUT:
@@ -762,7 +762,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
* address.
*
* DESCRIPTION:
* This function returns the base address of the internal register<EFBFBD>s
* This function returns the base address of the internal registers
* memory space .
*
* INPUT:
@@ -772,7 +772,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
* None.
*
* RETURN:
* 32 bit base address of the internal register<EFBFBD>s memory space.
* 32 bit base address of the internal registers memory space.
*
*******************************************************************************/
unsigned int memoryGetInternalRegistersSpace (void)
@@ -874,7 +874,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
* regionSize - The region's size. This function will decrement the
* 'regionSize' parameter by one and then check if the size
* is valid. A valid size must be programed from LSB to MSB
* as sequence of <EFBFBD>1<EFBFBD>s followed by sequence of <EFBFBD>0<EFBFBD>s.
* as sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2001
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
* U-Boot port on RPXClassic LF (CLLF_BW31) board
*

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2001
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
* U-Boot port on RPXClassic LF (CLLF_BW31) board
*

View File

@@ -6,7 +6,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engstr<EFBFBD>m, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -378,7 +378,7 @@ initdram (int board_type)
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are con<EFBFBD>gured,
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*

View File

@@ -5,44 +5,44 @@ Die Implementierung / Decodierung beruht auf den Angaben aus dem Do-
kument "PIC LWE-Tastatur" in der Fassung vom 9. 3. 2001, insbesonde-
re Tabelle 3 im Kapitel 4.3 Tastencodes. In U-Boot werden die vom
Keyboard-Controller gelesenen Daten hexadezimal codiert in der auto-
matisch angelegten Environment-Variablen "keybd" <EFBFBD>bergeben. Ist kei-
ne Taste gedr<EFBFBD>ckt worden, steht dort:
matisch angelegten Environment-Variablen "keybd" übergeben. Ist kei-
ne Taste gedrückt worden, steht dort:
keybd=000000000000000000
Der decodierte Tastencode ("keybd") kann mit den "bootargs" an den
Linux-Kernel <EFBFBD>bergeben und dort z. B. in einem Device-Treiber oder
Linux-Kernel übergeben und dort z. B. in einem Device-Treiber oder
einer Applikation ausgewertet werden.
Sonderfunktionen beim Booten:
Es lassen sich eine oder mehrere (beliebig viele) Tasten oder Tasten-
kombinationen definieren, die Sonderfunktionen ausl<EFBFBD>sen, wenn diese
Tasten beim Booten (Reset) gedr<EFBFBD>ckt sind.
kombinationen definieren, die Sonderfunktionen auslösen, wenn diese
Tasten beim Booten (Reset) gedrückt sind.
Wird eine eingestellte Taste bzw. Tastenkombination erkannt, so wird
in U-Boot noch vor dem Start des "Countdown" und somit vor jedem an-
deren Kommando der Inhalt einer dieser Taste bzw. Tastenkombination
zugeordneten Environment-Variablen ausf<EFBFBD>hren.
zugeordneten Environment-Variablen ausführen.
Die Environment-Variable "magic_keys" wird als Liste von Zeichen ver-
standen, die als Suffix an den Namen "key_magic" angef<EFBFBD>gt werden und
standen, die als Suffix an den Namen "key_magic" angefügt werden und
so die Namen der Environment-Variablen definieren, mit denen die
Tasten (-kombinationen) festgelegt werden:
Ist "magic_keys" NICHT definiert, so wird nur die in der Environment-
Variablen "key_magic" codierte Tasten (-kombination) gepr<EFBFBD>ft, und
ggf. der Inhalt der Environment-Variablen "key_cmd" ausgef<EFBFBD>hrt (ge-
Variablen "key_magic" codierte Tasten (-kombination) geprüft, und
ggf. der Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge-
nauer: der Inhalt von "key_cmd" wird der Variablen "preboot" zugewie-
sen, die ausgef<EFBFBD>hrt wird, unmittelbar bevor die interaktive Kommando-
sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando-
interpretation beginnt).
Enth<EFBFBD>lt "magic_keys" z. B. die Zeichenkette "0123CB*", so werden
nacheinander folgende Aktionen ausgef<EFBFBD>hrt:
Enthält "magic_keys" z. B. die Zeichenkette "0123CB*", so werden
nacheinander folgende Aktionen ausgeführt:
pr<EFBFBD>fe Tastencode ggf. f<EFBFBD>hre aus Kommando
prüfe Tastencode ggf. führe aus Kommando
in Variable in Variable
-----------------------------------
key_magic0 ==> key_cmd0
@@ -55,43 +55,43 @@ nacheinander folgende Aktionen ausgef
key_magic* ==> key_cmd*
Hinweis: sobald ein aktivierter Tastencode erkannt wurde, wird die
Bearbeitung abgebrochen; es wird daher h<EFBFBD>chstens eines der definier-
ten Kommandos ausgef<EFBFBD>hrt, wobei die Priorit<EFBFBD>t durch die Suchreihen-
Bearbeitung abgebrochen; es wird daher höchstens eines der definier-
ten Kommandos ausgeführt, wobei die Priorität durch die Suchreihen-
folge festgelegt wird, also durch die Reihenfolge der Zeichen in der
Varuiablen "magic_keys".
Die Codierung der Tasten, die beim Booten gedr<EFBFBD>ckt werden m<EFBFBD>ssen, um
eine Funktion auszul<EFBFBD>sen, erfolgt nach der Tastaturtabelle.
Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um
eine Funktion auszulösen, erfolgt nach der Tastaturtabelle.
Die Definitionen
=> setenv key_magic0 3a+3b
=> setenv key_cmd0 setenv bootdelay 30
bedeuten dementsprechend, da<EFBFBD> die Tasten mit den Codes 0x3A (Taste
"F1") und 0x3B (Taste "F2") gleichzeitig gedr<EFBFBD>ckt werden m<EFBFBD>ssen. Sie
k<EFBFBD>nnen dort eine beliebige Tastenkombination eintragen (jeweils 2
Zeichen f<EFBFBD>r die Hex-Codes der Tasten, und '+' als Trennzeichen).
bedeuten dementsprechend, daß die Tasten mit den Codes 0x3A (Taste
"F1") und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie
können dort eine beliebige Tastenkombination eintragen (jeweils 2
Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen).
Wird die eingestellte Tastenkombination erkannt, so wird in U-Boot
noch vor dem Start des "Countdown" und somit vor jedem anderen Kom-
mando das angebene Kommando ausgef<EFBFBD>hrt und somit ein langes Boot-
mando das angebene Kommando ausgeführt und somit ein langes Boot-
Delay eingetragen.
Praktisch k<EFBFBD>nnten Sie also in U-Boot "bootdelay" auf 0 setzen und
somit stets ohne jede User-Interaktion automatisch booten, au<EFBFBD>er,
wenn die beiden Tasten "F1" und "F2" beim Booten gedr<EFBFBD>ckt werden:
dann w<EFBFBD>rde ein Boot-Delay von 30 Sekunden eingef<EFBFBD>gt.
Praktisch könnten Sie also in U-Boot "bootdelay" auf 0 setzen und
somit stets ohne jede User-Interaktion automatisch booten, außer,
wenn die beiden Tasten "F1" und "F2" beim Booten gedrückt werden:
dann würde ein Boot-Delay von 30 Sekunden eingefügt.
Hinweis: dem Zeichen '#' kommt innerhalb von "magic_keys" eine beson-
dere Bedeutung zu: die dadurch definierte Key-Sequenz schaltet den
Monitor in den "Debug-Modus" - das bedeutet zun<EFBFBD>chst, da<EFBFBD> alle weite-
ren Meldungen von U-Boot <EFBFBD>ber das LCD-Display ausgegeben werden;
au<EFBFBD>erdem kann man durch das mit dieser Tastenkombination verkn<EFBFBD>pfte
Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite-
ren Meldungen von U-Boot über das LCD-Display ausgegeben werden;
außerdem kann man durch das mit dieser Tastenkombination verknüpfte
Kommando z. B. die Linux-Bootmeldungen ebenfalls auf das LCD-Display
legen, so da<EFBFBD> der Boot-Vorgang direkt und ohne weitere Hilfsmittel
legen, so daß der Boot-Vorgang direkt und ohne weitere Hilfsmittel
analysiert werden kann.
Beispiel:
@@ -107,20 +107,20 @@ chert:
(6) => setenv bootcmd bootp\;run nfsargs\;run addip\;run addfb\;bootm
Hierbei wird die Linux Commandline (in der Variablen "bootargs") im
Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zun<EFBFBD>chst
werden die f<EFBFBD>r Root-Filesystem <EFBFBD>ber NFS erforderlichen Optionen ge-
Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zunächst
werden die für Root-Filesystem über NFS erforderlichen Optionen ge-
setzt ("run nfsargs", vgl. (3)), dann die Netzwerkkonfiguration an-
gef<EFBFBD>gt ("run addip", vgl. (4)), und schlie<EFBFBD>lich die Systemconsole
gefügt ("run addip", vgl. (4)), und schließlich die Systemconsole
definiert ("run addfb").
Dabei wird im Normalfall die Definition (5) verwendt; wurde aller-
dings beim Reset die entsprechende Taste gedr<EFBFBD>ckt gehalten, so wird
diese Definition bei der Ausf<EFBFBD>hrung des in (2) definierten Kommandos
<EFBFBD>berschrieben, so da<EFBFBD> Linux die Bootmeldungen auch <EFBFBD>ber das Frame-
dings beim Reset die entsprechende Taste gedrückt gehalten, so wird
diese Definition bei der Ausführung des in (2) definierten Kommandos
überschrieben, so daß Linux die Bootmeldungen auch über das Frame-
buffer-Device (=LCD-Display) ausgibt.
Beachten Sie die Verdoppelung der '\'-Escapes in der Definition von
"key_cmd#" - diese ist erforderlich, weil der String _zweimal_ inter-
pretiert wird: das erste Mal bei der Eingabe von "key_cmd#", das
zweite Mal, wenn der String (als Inhalt von "preboot") ausgef<EFBFBD>hrt
zweite Mal, wenn der String (als Inhalt von "preboot") ausgeführt
wird.

View File

@@ -365,7 +365,7 @@ int board_early_init_f (void)
*
* This is just a preliminary fix, intended to turn off TENA
* as soon as possible to avoid noise on the network. Once
* I<EFBFBD>C is running we will make sure the interface is
* I2C is running we will make sure the interface is
* correctly initialized.
*/
immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA;

View File

@@ -63,7 +63,7 @@
/* Mapping:
* +-------------+------------+------------+--------------------------------+
* <EFBFBD> PCI MemAddr | PCI IOAddr | Local Addr | Device / Function |
* | PCI MemAddr | PCI IOAddr | Local Addr | Device / Function |
* +-------------+------------+------------+--------------------------------+
* | 0x00000000 | | 0xA0000000 | ISA Memory (hard wired) |
* | 0x00FFFFFF | | 0xA0FFFFFF | |

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,7 +1,7 @@
# Porting U-Boot onto RPXClassic LF_BW31 board
# Written by Pierre AUBERT
# E-Mail p.aubert@staubli.com
# St<EFBFBD>ubli Faverges - <www.staubli.com>
# Stäubli Faverges - <www.staubli.com>
#
# Sept. 20 2001
#

View File

@@ -279,7 +279,7 @@ usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
JFFS2 version 2.2. (NAND) <EFBFBD> 2001-2006 Red Hat, Inc.
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART

View File

@@ -8,7 +8,7 @@ design, which is optimized for high speed throughput between the processor and
the memory, disk drive and Ethernet port subsystems.
MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
used in 1U or 2U rack-mount chassis<EFBFBD><EFBFBD>, as well as in standard ATX/Micro-ATX
used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
chassis.
Building U-Boot

View File

@@ -1,5 +1,5 @@
/*
* Copyright (C) Excito Elektronik i Sk<EFBFBD>ne AB, All rights reserved.
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Author: Tor Krill <tor@excito.com>
*
* This program is free software; you can redistribute it and/or

View File

@@ -1,5 +1,5 @@
/*
* Copyright (C) Excito Elektronik i Sk<EFBFBD>ne AB, All rights reserved.
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Author: Tor Krill <tor@excito.com>
*
* This program is free software; you can redistribute it and/or

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -2,7 +2,7 @@
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB
* Daniel Engström, Omicron Ceti AB
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David M<EFBFBD>ller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -1,5 +1,5 @@
/* ported from ctfb.c (linux kernel):
* Created in Jan - July 2000 by Thomas H<EFBFBD>henleitner <th@visuelle-maschinen.de>
* Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
*
* Ported to U-Boot:
* (C) Copyright 2002 Denis Peter, MPL AG Switzerland
@@ -626,25 +626,25 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
/* that is the hardware < 69000 we have to manage
+---------+ +-------------------+ +----------------------+ +--+
| REFCLK |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|<EFBFBD>N|__
| 14.3MHz | |(NTSCDS) (<EFBFBD>1, <EFBFBD>5) | |Select (RDS) (<EFBFBD>1, <EFBFBD>4) | | | |
| REFCLK |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
| 14.3MHz | |(NTSCDS) (÷1, ÷5) | |Select (RDS) (÷1, ÷4) | | | |
+---------+ +-------------------+ +----------------------+ +--+ |
___________________________________________________________________|
|
| fvco fout
| +--------+ +------------+ +-----+ +-------------------+ +----+
+-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
+-| Detect | |& Filter VCO| | | | |<EFBFBD>1, 2, 4, 8, 16, 32| | |
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
| +--------+ +------------+ +-----+ | +-------------------+ +----+
| |
| +--+ +---------------+ |
|____|<EFBFBD>M|___|VCO Loop Divide|__________|
| | |(VLD)(<EFBFBD>4, <EFBFBD>16) |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷4, ÷16) |
+--+ +---------------+
****************************************************************************
that is the hardware >= 69000 we have to manage
+---------+ +--+
| REFCLK |__|<EFBFBD>N|__
| REFCLK |__|÷N|__
| 14.3MHz | | | |
+---------+ +--+ |
__________________|
@@ -652,12 +652,12 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
| fvco fout
| +--------+ +------------+ +-----+ +-------------------+ +----+
+-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
+-| Detect | |& Filter VCO| | | | |<EFBFBD>1, 2, 4, 8, 16, 32| | |
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
| +--------+ +------------+ +-----+ | +-------------------+ +----+
| |
| +--+ +---------------+ |
|____|<EFBFBD>M|___|VCO Loop Divide|__________|
| | |(VLD)(<EFBFBD>1, <EFBFBD>4) |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷1, ÷4) |
+--+ +---------------+

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* (C) Copyright 2005

View File

@@ -3,7 +3,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# St<EFBFBD>ubli Faverges - <www.staubli.com>
# Stäubli Faverges - <www.staubli.com>
# Pierre AUBERT p.aubert@staubli.com
#
#

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engstr<EFBFBD>m, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@@ -532,9 +532,9 @@
#define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
/*
Die Grafik-Treiber greifen <EFBFBD>ber die Adresse in diesem Macro auf den Chip zu.
Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
das gleiche Mapping durchf<EFBFBD>hren kann, wie der SC520 (also Aufteilen von IO-Zugriffen
das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
auf ISA- und PCI-Zyklen)
*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -115,7 +115,7 @@ struct mtd_info {
u_int32_t flags;
uint64_t size; /* Total size of the MTD */
/* "Major" erase size for the device. Na<EFBFBD>ve users may take this
/* "Major" erase size for the device. Naïve users may take this
* to be the only erase size available, or may use the more detailed
* information below if they desire
*/

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* (C) Copyright 2005

View File

@@ -41,7 +41,7 @@ HISTORY of the LZMA SDK
4.57 2007-12-12
-------------------------
- Speed optimizations in <EFBFBD>++ LZMA Decoder.
- Speed optimizations in Ñ++ LZMA Decoder.
- Small changes for more compatibility with some C/C++ compilers.

View File

@@ -79,7 +79,7 @@ phys_size_t initdram(int board_type)
mtsdram(SDRAM0_B0CR, 0x00082001);
mtsdram(SDRAM0_TR0, 0x41094012);
mtsdram(SDRAM0_TR1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8<EFBFBD>s @ 133MHz PLB */
mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
/*