colin/u-boot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mips: octeon: Add misc remaining header files

Browse Source 
Import misc remaining header files from 2013 U-Boot. These will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
This commit is contained in:
Aaron Williams
2021-04-23 19:56:32 +02:00
committed by Daniel Schwierzeck
parent deb8b23bc0
commit fe3334d0a3
29 changed files with 12242 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

109
arch/mips/mach-octeon/include/mach/octeon_qlm.h Normal file
View File

@@ -0,0 +1,109 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2020 Marvell International Ltd.
*/
#ifndef __OCTEON_QLM_H__
#define __OCTEON_QLM_H__
/* Reference clock selector values for ref_clk_sel */
#define OCTEON_QLM_REF_CLK_100MHZ 0 /** 100 MHz */
#define OCTEON_QLM_REF_CLK_125MHZ 1 /** 125 MHz */
#define OCTEON_QLM_REF_CLK_156MHZ 2 /** 156.25 MHz */
#define OCTEON_QLM_REF_CLK_161MHZ 3 /** 161.1328125 MHz */
/**
* Configure qlm/dlm speed and mode.
* @param qlm The QLM or DLM to configure
* @param speed The speed the QLM needs to be configured in Mhz.
* @param mode The QLM to be configured as SGMII/XAUI/PCIe.
* @param rc Only used for PCIe, rc = 1 for root complex mode, 0 for EP
* mode.
* @param pcie_mode Only used when qlm/dlm are in pcie mode.
* @param ref_clk_sel Reference clock to use for 70XX where:
* 0: 100MHz
* 1: 125MHz
* 2: 156.25MHz
* 3: 161.1328125MHz (CN73XX and CN78XX only)
* @param ref_clk_input This selects which reference clock input to use. For
* cn70xx:
* 0: DLMC_REF_CLK0
* 1: DLMC_REF_CLK1
* 2: DLM0_REF_CLK
* cn61xx: (not used)
* cn78xx/cn76xx/cn73xx:
* 0: Internal clock (QLM[0-7]_REF_CLK)
* 1: QLMC_REF_CLK0
* 2: QLMC_REF_CLK1
*
* @return Return 0 on success or -1.
*
* @note When the 161MHz clock is used it can only be used for
* XLAUI mode with a 6316 speed or XFI mode with a 103125 speed.
* This rate is also only supported for CN73XX and CN78XX.
*/
int octeon_configure_qlm(int qlm, int speed, int mode, int rc, int pcie_mode, int ref_clk_sel,
int ref_clk_input);
int octeon_configure_qlm_cn78xx(int node, int qlm, int speed, int mode, int rc, int pcie_mode,
int ref_clk_sel, int ref_clk_input);
/**
* Some QLM speeds need to override the default tuning parameters
*
* @param node Node to configure
* @param qlm QLM to configure
* @param baud_mhz Desired speed in MHz
* @param lane Lane the apply the tuning parameters
* @param tx_swing Voltage swing. The higher the value the lower the voltage,
* the default value is 7.
* @param tx_pre pre-cursor pre-emphasis
* @param tx_post post-cursor pre-emphasis.
* @param tx_gain Transmit gain. Range 0-7
* @param tx_vboost Transmit voltage boost. Range 0-1
*/
void octeon_qlm_tune_per_lane_v3(int node, int qlm, int baud_mhz, int lane, int tx_swing,
int tx_pre, int tx_post, int tx_gain, int tx_vboost);
/**
* Some QLM speeds need to override the default tuning parameters
*
* @param node Node to configure
* @param qlm QLM to configure
* @param baud_mhz Desired speed in MHz
* @param tx_swing Voltage swing. The higher the value the lower the voltage,
* the default value is 7.
* @param tx_premptap bits [0:3] pre-cursor pre-emphasis, bits[4:8] post-cursor
* pre-emphasis.
* @param tx_gain Transmit gain. Range 0-7
* @param tx_vboost Transmit voltage boost. Range 0-1
*/
void octeon_qlm_tune_v3(int node, int qlm, int baud_mhz, int tx_swing, int tx_premptap, int tx_gain,
int tx_vboost);
/**
* Disables DFE for the specified QLM lane(s).
* This function should only be called for low-loss channels.
*
* @param node Node to configure
* @param qlm QLM to configure
* @param lane Lane to configure, or -1 all lanes
* @param baud_mhz The speed the QLM needs to be configured in Mhz.
* @param mode The QLM to be configured as SGMII/XAUI/PCIe.
*/
void octeon_qlm_dfe_disable(int node, int qlm, int lane, int baud_mhz, int mode);
/**
* Some QLMs need to override the default pre-ctle for low loss channels.
*
* @param node Node to configure
* @param qlm QLM to configure
* @param pre_ctle pre-ctle settings for low loss channels
*/
void octeon_qlm_set_channel_v3(int node, int qlm, int pre_ctle);
void octeon_init_qlm(int node);
int octeon_mcu_probe(int node);
#endif /* __OCTEON_QLM_H__ */