TFTP transfers of large files, for example 128 MiB, can sporadically
get stuck and the transfer slows down considerably.
This happens because the TX DMA descriptor in DRAM becomes out of sync
with the view of the TX DMA descriptor content from the CPU side, which
is viewed through the CPU caches. In order to guarantee these two views
are consistent, the cache over TX DMA descriptor that has possibly been
written by the rswitch hardware must first be invalidated, only then can
the descriptor be cleared and updated by the CPU, and finally the cache
over that area must be flushed back into DRAM to make sure the rswitch
hardware has consistent view of the updated descriptor content.
The very first invalidation operation was missing, which led to sporadic
corruption of the TX DMA descriptor. Fix it, add the missing invalidation
operation.
Reported-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Enric Balletbo i Serra <eballetb@redhat.com>
TFTP transfer size can be used to re-size the TFTP progress bar on
single line based on the server reported file size. Enable it by
default for Renesas hardware to avoid long scrolling walls of '#'
character during long TFTP transfers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Early revisions of the R-Car V4M Series Hardware User’s Manual
contained an incorrect formula for the CPU core clocks:
ZCnφ = (PLL2VCO x 1/2) x mult/32
Dang-san fixed this by using CLK_PLL2_DIV2 instead of CLK_PLL2 as the
parent clock.
In Rev.0.70 of the documentation, the formula was corrected to:
ZCnφ = (PLL2VCO x 1/4) x mult/32
As the CPG Block Diagram now shows a separate 1/4 post-divider for PLL2,
the use of CLK_PLL2_DIV2 is a recurring source of confusion. Hence get
rid of CLK_PLL2_DIV2, and include the proper 1/4 post-divider in the
invocation of the DEF_GEN4_Z() macro, like is done on other R-Car Gen4
(and Gen3) SoCs.
Ported from Linux commit
92850bed9d4d ("clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks")
Reported-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0d2789cac2bf306145fe0bbf269c2da5942bb68f.1728377724.git.geert+renesas@glider.be
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
One can use ccache by keeping ccache in PATH or by providing the full
path to ccache as well. Providing the full path to ccache fails as the
current regex tries to look for ccache being the initial token during
filtering.
Do a greedy search to remove anything before ccache for regex matching.
Fixes: 04b1d84221 ("Makefile: fix empty MK_ARCH when using ccache")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
commit e27bddff4b ("imx8m: Restrict usable memory to space below 4G boundary")
tried to adjust the usable memory limits on a 4GB boundary.
ram_top is described as 'top address of RAM used by U-Boot' and we want
to preserve that. This is defined as a phys_addr_t and unfortunately
its size differs across architectures. This has lead us to a weird
state where 32bit boards define it 'SZ_4GB - 1' and 64bit boards as
'SZ_4GB' unless it was otherwise defined.
With some recent LMB changes and specifically
commit 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
the board fails to boot properly although the commit above is correct
since it's making sure that no memory above ram_top is usable -- but
added to our memory map so EFI can hand it over to the booted OS.
The reason for that is that during the LMB init we add all usable memory
in lmb_add_memory(). In that function any memory above ram_top gets added
as 'reserved' for LMB. With the current values tha's set to 0xFFFF_FFFF
for this board. Later LMB is trying to protect the memory area U-Boot lives
in with lmb_reserve_common(). The latter fails though since it tries to
add U-Boot top (which is 0xFFFF_FFFF as well) to U-Boot 'bottom'. This call
will fail since 1 byte of that memory range is already marked as 'reserved'.
Since we are close to the release, LMB seems to assume that the address
is rounded up and is the 'next address' and so does parsing and adding
memory ranges from DT files, bump the ram_top of the board by 1byte.
In the long run we should change all of the above and have 32b and 64b
platforms define ram_top identically.
Add a Fixes tag although the commit is correct, so people can figure out
the broken scenarios in the future.
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Fixes: commit 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reported-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Closes: https://lore.kernel.org/all/20241216114231.qpfwug3zfqkxn3d5@joaog-nb.corp.toradex.com/
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: 74f88b7221 ("ARM: imx: imx8m: Fix board_get_usable_ram_top()")
("Enable EFI_LOADER_BOUNCE_BUFFER") is not the correct fix for the
problem it describes.
The change of memory addressing leading to side-effects in commit
22f2c9ed9f ("efi: memory: use the lmb API's for allocating and
freeing memory") is remedied by commit 1a48b0be93 ("lmb: prohibit
allocations above ram_top even from same bank").
This reverts commit 9c792ab336.
eth_get_dev() returns NULL if no network device is available.
Not checking the return value leads to a crash when the device
pointer is dereferenced.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
If the dns command cannot find a network interface, we should return
CMD_RETFAIURE and not -1 (CMD_RET_USAGE).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
There have been a few changes to the areas that this file documents
without having regenerated the file. Do so now.
Signed-off-by: Tom Rini <trini@konsulko.com>
When specifying a directory containing DTBs with 'fit,fdt-list-dir', it can be
handy not to have to also specify this directory to the input directories of
binman with '-I' option and use the method tools.append_input_dirs() append it.
This avoids to have to specify the DTB directory in both the device tree
provided to binman and through '-I' option to binman.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
append_input_dirs() can be used to append a list of input directories to indir
global list.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This change allows to replace both 'SEQ' and 'NAME' keywords by respectively a
sequence number and the name of the FDT to provide more flexibility in the node
name for the device trees included in the FIT.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Input directories can be passed to binman using the '-I' option and those
input directories are now also passed to 'dtc' when run by binman.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
An optional list of input directories can be passed to EnsureCompiled() which
allows to pass a list of directories where input files can be searched.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
mkimage can be used for both signing the FIT or encrypt its content and the
option '-k' can be used to pass a directory where both signing and encryption
keys can be retrieved. Adding 'fit,encrypt' property to the 'fit' node, leads to
try to find keys directory among binman include directories.
_get_priv_keys_dir() is renamed as _get_keys_dir() and adapted to support both
signing and encryption nodes in the FIT.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When the initialisation vector is randomly generated, its value shall be
stored in the FIT together with the encrypted data. The changes allow to
store the IV in the FIT also in the case where the key is not stored in
the DTB but retrieved somewhere else at runtime.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
For new PowerPC developments, it will be useful to borrow devicetrees
from Linux. This patch makes it possible.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
In generic_phy_get_bulk(), if 'phys' property is absent in
the device node then it is not an error condition.
Change print message verbosity to debug to avoid spamming
console in such cases.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The current value of CONFIG_FASTBOOT_BUF_ADDR is incorrect for hardware
with 512MB and 1GB of RAM. The RAM address ranges for these devices are:
- 512MB:
- Start: 0x80000000
- End: 0xA0000000
- 1GB:
- Start: 0x80000000
- End: 0xC0000000
The current buffer address makes fastboot downloads work only on
hardware with 2GB of RAM.
To fix this issue:
1. Lower CONFIG_FASTBOOT_BUF_ADDR to 0x88200000. This makes the buffer
to be equal ot CONFIG_SYS_LOAD_ADDR, which is a safe address to
download files using fastboot.
2. Reduce the size of the download buffer to 128MB, avoiding overlaps
with RAMDISK_ADDR_R. This is a good enough value for individual
downloads.
These changes make fastboot downloads work with 512MB and 1GB devices.
Fixes: defe30a78b ("verdin-am62: add DFU, USB and UUU fastboot support")
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Support of legacy 64-bit entry point was already present when booting a bzimage
with 'zboot' but not supported with 'bootm' when the x86_64 Linux kernel is
embedded in a FIT image.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Evgeny Bachinin <EABachinin@salutedevices.com> says:
This patch-set repairs ability to use sandbox with CONFIG_OF_EMBED=y.
For now, to use OF_EMBED, the following must be done
1) sandbox64_defconfig should have:
```
-CONFIG_OF_LIVE=y
+CONFIG_OF_EMBED=y
```
2) On sandbox when CONFIG_OF_EMBED=y, the u-boot process can't start
due to:
```
Bloblist at b000 not found (err=-2)
initcall failed at call 000000000011829c (err=-2: No such file or \
directory)
### ERROR ### Please RESET the board ###
```
So, it is natural desire to disable CONFIG_BLOBLIST just to test
sandbox with OF_EMBED=y (disable it one way or another):
```
config SANDBOX
- select BLOBLIST
+ select BLOBLIST if SOME_NON_EXISTING_OPTION
```
3) As a result, having such changes (CONFIG_OF_EMBED=y &&
CONFIG_BLOBLIST=n) leads to the link & run-time errors, being fixed
by this patch series.
Link: https://lore.kernel.org/r/20241202-sandbox_repair_of_embed-v1-0-05aff4b0ccf7@salutedevices.com
[trini: The final patch is dropped as no longer relevant with Simon's
rework to that function which is now applied.]
This series is from Simon Glass <sjg@chromium.org>.
It first corrects the test for checking if a bloblist could have come
from TPL and so we check for a device tree, and then changes the
argument order for board_fdt_blob_setup() to be more inline with our
usual argument ordering.
Link: https://lore.kernel.org/r/20241102174944.412088-1-sjg@chromium.org
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans28.ltrans.o:(.data.rel+0x4b0): undefined \
reference to `do_ut_bloblist'
```
Fixes: 6ea5df39e8 ("test: Only enable bloblist test when supported")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccRVty.ltrans40.ltrans.o: in function `lib_test_is_enabled':
test/lib/kconfig.c:24: undefined reference to \
`invalid_use_of_IF_ENABLED_INT'
ld: test/lib/kconfig.c:26: undefined reference to \
`invalid_use_of_CONFIG_IF_ENABLED_INT'
```
Fixes: 29784d62ed ("test: Add some tests for kconfig.h")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans0.ltrans.o: in function `state_uninit':
arch/sandbox/cpu/state.c:508: undefined reference to `bloblist_finish'
```
Fixes: 1c52fcca72 ("sandbox: Write out bloblist when exiting")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
The condition for receiving a bloblist from TPL is reversed. This was
only noticed are the other fixes landed. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
The content of CONFIG_OF_SPL_REMOVE_PROPS is the same in both
STM32MP15xx DHCOM and DHCOR defconfigs, deduplicate the content
into stm32mp15_dhsom.config .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The access-controllers DT property is not useful in STM32MP15xx SPL,
remove it to reduce SPL control DT size. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Commit 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
broke booting from SD card on STM32MP15xx , reinstate raw mode SD
boot configuration options and select the correct raw mode partition
for STM32MP15xx to fix SD boot on STM32MP15xx DHSOM.
Fixes: 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
Reported-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it locally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it globally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Since commit 6534d26ee9 ("lmb: do away with arch_lmb_reserve()"),
STM32F746-disco hangs when loading device tree just before starting
kernel:
Retrieving file: /stm32f746-disco.dtb
Kernel image @ 0xc0008000 [ 0x000000 - 0x19ae00 ]
Flattened Device Tree blob at c0408000
Booting using the fdt blob at 0xc0408000
Working FDT set to c0408000
Loading Device Tree to c05f8000, end c05ff71c ...
Adjust STACK_SIZE to 16KB for STM32 MCUs (F4/F7 and H7) boards
to fix kernel boot process as some of these boards embeds a limited
amount of memory.
Fixes: 6534d26ee9 ("lmb: do away with arch_lmb_reserve()")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
