Add tests for booting image using tftpboot/pxe boot commands, tftpboot
boot case loads the FIT image into DDR and boots using bootm command
whereas pxe boot cases downloads the pxe configuration file from the
TFTP server and interprets it to boot the images mentioned in the pxe
configurations file.
This test relies on boardenv_* containing configuration values including
the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
boot log pattern value is matched. For example, if the parameter
'pattern' is defined as 'login:', it will boot till login prompt.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Tested-by: Tom Rini <trini@konsulko.com>
Executing a u-boot command may raise an error or extra bad pattern,
beyond the default bad patterns. Providing a way to enable the console
output error check in test.
For example, description for OS boot test:
import re
check_type = 'kernel_boot_error'
check_pattern = re.compile('ERROR -2: can't get kernel image!')
with u_boot_console.enable_check(check_type, check_pattern):
u_boot_console.run_command('<boot command>')
Signed-off-by: Love Kumar <love.kumar@amd.com>
For pcr_read and pcr_extend commands allow the digest algorithm to be
specified by an additional argument. If not specified it will default to
SHA256 for backwards compatibility.
Additionally update test_tpm2.py for the changes in output in pcr_read
which now shows the algo and algo length in the output.
A follow-on to this could be to extend all PCR banks with the detected
algo when the <digest_algo> argument is 'auto'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
Make changes to the FWU metadata access tests corresponding to the
changes in the FWU metadata access code.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently we have the option to tell the console code that we should
ignore the SPL banner. We also have an option to say that we can see it
a second time, and ignore it. However, some platforms such as TI AM64x
will have us see the SPL banner three times. Rather than add an
"spl3_skipped" option, rework the code. By default we expect to see the
banner once, but boards can specify seeing it as many times as they
expect to.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add SPL variant of DM_RNG so that the DM_RNG can be disabled in SPL
if necessary. This may be necessary due to e.g. size constraints of
the SPL.
Signed-off-by: Marek Vasut <marex@denx.de>
The image is not unloaded if a security violation occurs.
If efi_set_load_options() fails, we do not free the memory allocated for
the optional data. We do not unload the image.
* Unload the image if a security violation occurs.
* Free load_options if efi_set_load_options() fails.
* Unload the image if efi_set_load_options() fails.
Fixes: 53f6a5aa86 ("efi_loader: Replace config option for initrd loading")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* The sandbox must not use an arbitrary file name bootsbox.efi but the
file name matching the host architecture to properly boot the respective
file. We already have an include which provides a macro with the name of
the EFI binary. Use it.
* The path to the EFI binary should be absolute.
* The path and the file name must be capitalized to conform to the UEFI
specification. This is important when reading from case sensitive
file systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The default sequence of boot methods is determined by alphabetical sorting
during linkage.
* efi_mgr must run before efi to be UEFI compliant
* pxe should run as last resort
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Currently, all the capsules for the sandbox platform are generated at
the time of running the capsule tests. To showcase generation of
capsules through binman, generate all raw(non FIT payload) capsules
needed for the sandbox platform as part of the build. This acts as an
illustrative example for generating capsules as part of a platform's
build.
Make corresponding change in the capsule test's configuration to get
these capsules from the build directory.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The fields Creator ID and Creator Revision contain information about the
tool that created an ACPI table. This may be the ASL compiler for some
tables but it is not for others. Naming these fields aslc_id and
aslc_revision is misleading.
It is usual to see diverse values of Creator ID. On a laptop I saw these:
'AMD ', 'INTL, 'MSFT', 'PTEC'. Obviously not all relate to the Intel
ASL compiler.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add a test for the button_cmd feature. This validates that commands can
be mapped to two buttons, that the correct command runs based on which
button is pressed, that only 1 command is run, and that no command runs
if button_cmd_0_name is wrong or unset.
Additionally, fix a potential uninitialised variable use caught by these
tests, the btn variable in get_button_cmd() is assumed to be null if
button_get_by_label() fails, but it's actually used uninitialised in
that case.
CONFIG_BUTTON is now enabled automatically and was removed when running
save_defconfig.
Fixes: e761035b64 ("boot: add support for button commands")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add a test for reset commands which performs resetting of CPU, It does
COLD reset by default and WARM reset with -w option.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add test case for saveenv command in non-JTAG bootmode which saves the
u-boot environment variables in persistent storage.
Signed-off-by: Love Kumar <love.kumar@amd.com>
This code assumes that CONFIG_MMC and it causes a build error when
the config is disabled.
aarch64-linux-gnu-ld.bfd: test/boot/bootstd_common.o: in function `bootstd_test_check_mmc_hunter':
test/boot/bootstd_common.c:83:(.text.bootstd_test_check_mmc_hunter+0x70):
undefined reference to `_u_boot_list_2_bootdev_hunter_2_mmc_bootdev_hunter'
Fixes: 66e3dce787 ("bootstd: Allow hunting for a bootdev by label")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
The bootflow testing assumes that BOOTMETH_CROS is enabled but it
might not be which leads to a build error.
aarch64-linux-gnu-ld.bfd: test/boot/bootflow.o: in function `prep_mmc_bootdev':
test/boot/bootflow.c:549:(.text.prep_mmc_bootdev+0x1c8):
undefined reference to `_u_boot_list_2_driver_2_bootmeth_cros'
Fixes: d08db02d2d ("bootstd: Add a test for bootmeth_cros")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
In gsub, when the destination string is empty, the string 't' is
provided and the regular expression doesn't match, then the final result
is an empty string.
Example:
=> echo ${foo}
=> setenv foo
=> setexpr foo gsub e a bar
=> echo ${foo}
=>
The variable ${foo} should contain "bar" and the lack of match shouldn't
be considered an error.
This patch fixes the erroneous behavior by removing the return
statement and breaking out of the loop in case of lack of match.
Also add a test for the no match case.
Signed-off-by: Massimiliano Minella <massimiliano.minella@se.com>
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Raymond Mao <raymond.mao@linaro.org> says:
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Handoff spec v0.9.
If an arch wishes to have different behaviors for loading bloblist
from the previous boot stage, it is required to implement the custom
function xferlist_from_boot_arg().
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add test cases to verify the different type of secure boot images loaded
at DDR location for AMD's ZynqMP SoC. It also adds tests authentication
and decryption functionality using AES and RSA features for Zynq.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add gpio pins generic test for the set of gpio pin list to test various
gpio related functionality, such as the input, set, clear, and toggle,
it also tests the input and output functionality for shorted gpio pins.
This test depends on boardenv* configuration to define gpio pins names.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Update pygit2 and py to their latest versions. Even in the venv pygit2
still links against the system libgit2 library which is failing on
latest Arch Linux.
The py library also needs updating to fix a KeyNotFound exception during
test initialisation.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Provide a unit test for the smbios command.
Provide different test functions for QEMU, sandbox, and other systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Additionally test a UTF-8 string where each code point translates to three
UTF-8 bytes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add test cases for bootstage command to print the bootstage report, to
stash the data into memory and to unstash the data from memory.
Signed-off-by: Love Kumar <love.kumar@amd.com>
With commit 42c0e5bb05 ("test: Find leftovers after clean/mrproper")
we assume that we are performing out of tree builds. test_clean and
test_mrproper fail if the assumption isn't met.
However there are valid scenarios where tests run with in source builds
(i.e., test.py --build-dir=.).
Automatically skip cleanup tests in such scenarios to prevent false
positives.
Signed-off-by: Tobias Deiminger <tdmg@linutronix.de>
Reviewed-by: Harald Seiler <u-boot@rahix.de>
What we were doing here amounts to simplifying the code for the new hush
parser, and the workarounds are required when using the old one. As we
have returned to having the old parser be default for now, we must undo
this so that the test passes again.
This reverts commit 6c2f753f4a.
Signed-off-by: Tom Rini <trini@konsulko.com>
In practice, as this test defaults to enabled rather than disabled, too
many platforms now fail.
This reverts commit d836473862.
Signed-off-by: Tom Rini <trini@konsulko.com>
With newer versions of trace-cmd the report subcommand will have
different output from before if we do or do not pass -l. However, with
the -l flag passed our put is consistent here. This updates our regular
expressions and comments for this as well now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Update packaging to be version 23.2 to match our Sphinx requirements.
This will let us build a pip cache out of both of our requirements.txt
files.
Signed-off-by: Tom Rini <trini@konsulko.com>
Documentation:
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
The version of pycryptodomex that we use is vulnerable to this CVE.
While not likely an issue for us, let us upgrade to be on the safe side.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
