Pull request efi-next-20250105
Documentation:
* doc: develop: Fix typos and wording in binman/binman.rst
* doc: develop: Fix typos and wording in gdb.rst
* doc: sandbox: Fix the "sb" command name
* doc/develop/distro.rst: Better document upstream definition of extlinux.conf
UEFI:
* efi_loader: avoid writing message in Exit() boot service
* efi_loader: update EFI specification version
* cmd: efidebug: update output of memory attributes
* efi_loader: Don't warn if the TCG2 FinalEvents table is not installed
* cmd: bootmenu: add parameter -e for UEFI boot options
* efi_loader: Update startimage_exit self-test to check error
* efi: Correct ECPT table GUID
Others:
Building the API demo application for riscv64 is supported.
* API: unify platform_sys_info() implementations
* examples: implement _start and syscall for RISC-V
* examples: use architecture specific memset() on RISC-V
* examples: use QEMU compatible LOAD_ADDR on RISC-V
* test: fix test_extension.py
* configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION
* CI: xilinx_versal_virt: disable USB_DWC3
* net: eth_bootdev_hunt() should not run DHCP
The bootmenu command can display
* menu entries defined by environment variables
* menu entries defined by UEFI boot options
Not in all cases showing the UEFI boot options is desired.
Provide a new parameter '-e' to select the display of UEFI boot options.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add the basic 'hello world ta' command which increment
of the value passed. This provides easy test for
establishing a session with OP-TEE TA and verify.
It includes following "hello world ta" subcommands:
optee hello; default value '0' is passed and gets incremented.
optee hello <value>; value to increment via OP-TEE HELLO
WORLD TA.
To enable the OP-TEE side HELLO WORLD example please refer
https://optee.readthedocs.io/en/latest/building/gits/optee_examples/optee_examples.html
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The number of bytes may only be specified if a device number id provided.
Correct the formatting.
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This is a debug command to monitor the retention state of the data on
the array. The command needs a duplication of the mtd_read_oob()
function to actually return the maximum number of bitflips encountered
while reading the page. We could write a specific implementation for the
Sunxi driver but this is probably enough.
nand watch <off> <size> - check an area for bitflips
nand watch.part <part> - check a partition for bitflips
nand watch.chip - check the whole device for bitflips
The output may be a bit verbose and could look like:
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Page 0 (0x00000000) -> error -74
Page 1 (0x00000800) -> error -74
Page 2 (0x00001000) -> error -74
Page 3 (0x00001800) -> error -74
Page 4 (0x00002000) -> error -74
Page 5 (0x00002800) -> error -74
Page 6 (0x00003000) -> error -74
Page 7 (0x00003800) -> error -74
Page 8 (0x00004000) -> error -74
Page 9 (0x00004800) -> error -74
Page 10 (0x00005000) -> error -74
Page 11 (0x00005800) -> error -74
Page 12 (0x00006000) -> error -74
Page 13 (0x00006800) -> error -74
Page 14 (0x00007000) -> error -74
Page 15 (0x00007800) -> error -74
Page 16 (0x00008000) -> error -74
Page 17 (0x00008800) -> error -74
Page 18 (0x00009000) -> error -74
Page 19 (0x00009800) -> error -74
Page 20 (0x0000a000) -> error -74
Page 21 (0x0000a800) -> error -74
Page 22 (0x0000b000) -> error -74
Page 23 (0x0000b800) -> error -74
Page 1110 (0x0022b000) -> up to 1 bf/chunk
Page 1122 (0x00231000) -> up to 1 bf/chunk
Page 1132 (0x00236000) -> up to 1 bf/chunk
Page 1362 (0x002a9000) -> up to 1 bf/chunk
Page 4990 (0x009bf000) -> up to 1 bf/chunk
Page 5728 (0x00b30000) -> up to 1 bf/chunk
Page 7116 (0x00de6000) -> up to 1 bf/chunk
Page 7160 (0x00dfc000) -> up to 1 bf/chunk
Page 7494 (0x00ea3000) -> up to 1 bf/chunk
Page 10842 (0x0152d000) -> up to 1 bf/chunk
Page 11614 (0x016af000) -> up to 1 bf/chunk
Page 11970 (0x01761000) -> up to 1 bf/chunk
Page 12536 (0x0187c000) -> up to 1 bf/chunk
Page 12687 (0x018c7800) -> up to 1 bf/chunk
Page 14298 (0x01bed000) -> up to 1 bf/chunk
Page 18268 (0x023ae000) -> up to 1 bf/chunk
Page 18760 (0x024a4000) -> up to 1 bf/chunk
Page 21440 (0x029e0000) -> up to 1 bf/chunk
Page 22336 (0x02ba0000) -> up to 1 bf/chunk
Page 22592 (0x02c20000) -> up to 1 bf/chunk
Page 23872 (0x02ea0000) -> up to 1 bf/chunk
Page 27584 (0x035e0000) -> up to 1 bf/chunk
Page 35008 (0x04460000) -> up to 1 bf/chunk
Page 37184 (0x048a0000) -> up to 1 bf/chunk
Page 41728 (0x05180000) -> up to 1 bf/chunk
Page 42176 (0x05260000) -> up to 1 bf/chunk
Page 43200 (0x05460000) -> up to 1 bf/chunk
Page 43328 (0x054a0000) -> up to 1 bf/chunk
Page 45376 (0x058a0000) -> up to 1 bf/chunk
Page 47040 (0x05be0000) -> up to 1 bf/chunk
Page 47552 (0x05ce0000) -> up to 1 bf/chunk
Page 49344 (0x06060000) -> up to 1 bf/chunk
Page 49856 (0x06160000) -> up to 1 bf/chunk
Page 62784 (0x07aa0000) -> up to 1 bf/chunk
Page 65153 (0x07f40800) -> up to 1 bf/chunk
Page 65228 (0x07f66000) -> up to 1 bf/chunk
Page 65382 (0x07fb3000) -> up to 1 bf/chunk
Page 98624 (0x0c0a0000) -> up to 1 bf/chunk
Page 101952 (0x0c720000) -> up to 1 bf/chunk
Page 107584 (0x0d220000) -> up to 1 bf/chunk
Page 118208 (0x0e6e0000) -> up to 1 bf/chunk
Page 126656 (0x0f760000) -> up to 1 bf/chunk
Page 127680 (0x0f960000) -> up to 1 bf/chunk
Page 129920 (0x0fdc0000) -> up to 1 bf/chunk
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
It is also possible to reduce the output with the .quiet suffix in order
to just show the summary.
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This breaks chromebook_coral which says:
Video: No video mode configured in FSP!
This reverts commit 2e9313179a.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a small utility for displaying some information about U-Boot and the
hardware it's running on in a similar fashion to the popular neofetch
tool for Linux [1].
While the output is meant to be useful, it should also be pleasing to
look at and perhaps entertaining. The ufetch command aims to bring this
to U-Boot, featuring a colorful ASCII art version of the U-Boot logo.
[1]: https://en.wikipedia.org/wiki/Neofetch
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8560-QRD
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/23430
- Prepare for implementing the EFI_HTTP_PROTOCOL:
- Make wget functionality callable even if the wget command is not
built (add CONFIG_WGET symbol).
- Ensure that wget_with_dns() works the same with the old network
stack and with lwIP.
- Put server_name and port into wget_ctx.
- Integrate struct wget_info into wget code.
- Move ip_to_string to lib/net_utils.c
These fields are currently set on exactly two platforms today, and used
by only one of them. Update pic32mzdask to use CFG_SYS_SRAM* in the one
location it needs it and otherwise drop this field from the bd_info
struct.
Signed-off-by: Tom Rini <trini@konsulko.com>
Each wget request now fills the struct wget_info. The efi
bootdevice is now set conditionally to the set_bootdevice
variable in wget_info, and the same holds for lmb memory check.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Let net/wget.c and net/lwip/wget.c depend on CONFIG_WGET, and
cmd/wget.c depend on CONFIG_CMD_WGET. This way, the wget code
can be used regardless of whether the wget command is available.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rasmus Villemoes <ravi@prevas.dk> says:
Doing bringup of a board, part of my bootstrap logic is in U-Boot. So
when tweaking that logic, I was bitten by a previous completed
bootstrap having left a copy of the environment on the device, which
was imported and thus overrided the new logic.
So I thought, "ok, I'll just make sure to put 'env default -a' as the
first part of the bootstrap logic so I'm not bitten again". Alas, my
logic also relies on certain variables that are set by C code
(e.g. for detecting board variant), and doing 'env default -a' also
eliminates those.
Looking around, the hashtab code already supports a flag that does
exactly what I need, and exposing that is (morally) a one-liner.
Link: https://lore.kernel.org/r/20241030213404.2894247-1-ravi@prevas.dk
It can be useful to set all variables defined in the default
environment to the value they have there, but without removing
variables that are only defined at runtime. This can sort-of be done
today, by using the "env default var1 var2 ..." variant, but that
requires listing all variables defined in the default
environment. It's much more convenient to be able to say
env default -k -a
The -k flag is also meaningful in the other case: If var1 is not
defined in the default environment, but var2 is,
env default var1 var2
would emit a warning about var1 not being in the default env and thus
being deleted. With -k, there's no warning, and var1 is kept as-is.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
do_upl_write() calls upl_get_test_data() which may increment the fail
count in the unit test state. We should initialize it.
Addresses-Coverity-ID: 510465 Uninitialized scalar variable
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Since commit 348ea87850 ("cmd: hash: fix param count check") the hash
command cannot be used without the optional variable name parameter if
CONFIG_HASH_VERIFY=y. 'hash sha1 $loadaddr $filesize' returns
CMD_RET_USAGE.
The minimum number of arguments is four no matter if verification is
enabled or not.
Fixes: 348ea87850 ("cmd: hash: fix param count check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
With the recent changes of lwip & mbedTLS we can now download from
https:// urls instead of just http://.
Adjust our wget lwip version parsing to support both URLs.
While at it adjust the default TCP window for QEMU since https seems to
require at least 16384
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
This patch adds a new callback named need_reprint for menu.
The need_reprint will be called before printing the menu. If the
callback exists and returns FALSE, menu printing will be canceled.
This is very useful if the menu was not changed. It can save time
for serial-based menu to handle more input data.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
This is mostly hidden in the background, but it is sometimes useful to
look at it. Add a function to allow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the cbsysinfo command to show the contents of the CMOS option
table.
While we are here, add some example output for this command, along with
mention of what the unimplemented tags are.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the buffer address is not set, say so, rather than showing an
address which looks very strange, on sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
To conform with other messages capitalize the first letter:
%s/enter description/Enter description/g
Adjust the unit tests accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
/Makefile already adds lib include paths to UBOOTINCLUDE. There is no point
in adding the same paths again.
Clearly separate the lines relating to NET and to NET_LWIP.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <sjg@chromium.org>
In preparation for expanding this command, move it into a separate file.
Rename the function to remove the extra underscore. Update the number of
arguments to 1, since 3 is incorrect.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/22962
Dfu:
- Rely on device tree for spi speed/mode on spi flash
Android Image:
- Fix booting on platforms having > 4GiB of memory
- Decompress boot image to kernel_addr_r when compression is enabled
- Honor CONFIG_SYS_LOAD_ADDR when mkbootimg uses default address
Bcb:
- Rework bcb command to use U_BOOT_LONGHELP
- Move ab_select cmd to bcb cmd
- Implement ab_dump command in bcb
- bcb: Write '_<slot>' instead of '<slot>' to misc partition
Some functions are not used anywhere except the same file
where they are defined. Mark them static. This helps avoiding
the compiler warnings:
cmd/nvedit.c:201:5: warning: no previous prototype for ‘do_env_ask’ [-Wmissing-prototypes]
cmd/nvedit.c:315:5: warning: no previous prototype for ‘do_env_callback’ [-Wmissing-prototypes]
cmd/nvedit.c:384:5: warning: no previous prototype for ‘do_env_flags’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
