Jerome Forissier <jerome.forissier@linaro.org> says:
This series introduces threads and uses them to improve the performance
of the USB bus scanning code and to implement background jobs in the
shell via two new commands: 'spawn' and 'wait'.
The threading framework is called 'uthread' and is inspired from the
barebox threads [2]. setjmp() and longjmp() are used to save and
restore contexts, as well as a non-standard extension called initjmp().
This new function is added in several patches, one for each
architecture that supports HAVE_SETJMP. A new symbol is defined:
HAVE_INITJMP. Two tests, one for initjmp() and one for the uthread
scheduling, are added to the lib suite.
After introducing threads and making schedule() and udelay() a thread
re-scheduling point, the USB stack initialization is modified to benefit
from concurrency when UTHREAD is enabled, where uthreads are used in
usb_init() to initialize and scan multiple busses at the same time.
The code was tested on arm64 and arm QEMU with 4 simulated XHCI buses
and some devices. On this platform the USB scan takes 2.2 s instead of
5.6 s. Tested on i.MX93 EVK with two USB hubs, one ethernet adapter and
one webcam on each, "usb start" takes 2.4 s instead of 4.6 s.
Finally, the spawn and wait commands are introduced, allowing the use of
threads from the shell. Tested on the i.MX93 EVK with a spinning HDD
connected to USB1 and the network connected to ENET1. The USB plus DHCP
init sequence "spawn usb start; spawn dhcp; wait" takes 4.5 seconds
instead of 8 seconds for "usb start; dhcp".
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=446674
[2] https://github.com/barebox/barebox/blob/master/common/bthread.c
Link: https://lore.kernel.org/r/20250418141114.2056981-1-jerome.forissier@linaro.org
Some test commands (such as "false", or the empty string) need
CONFIG_HUSH_PARSER=y. Fix test/cmd/command.c.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The $loadaddr variable is a hexadecimal value, not a string, it must be
assigned using env_set_hex(). This may break follow up tests, like the
dm_test_cmd_hash_md5 in CI. To avoid any interference with other tests,
set $wgetaddr variable which is specific to this test and use it in the
test.
Fixes: 20f641987f ("test/cmd/wget.c: move net_test_wget() to the cmd test suite")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Use the new suite-runner to run these tests instead.
It is not clear that these actually work, since they are not enabled on
sandbox for some reason.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
free_mem is a misnomer. We never update it with the free memory for
LMB. Instead, it describes all available memory and is checked against
used_mem to decide whether an area is free or not.
So let's rename this field to better match its usage.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
LMB flags is not an enum anymore. It's currently used as a bitmask
in various places of our code. So make it a u32 which is more
appropriate when dealing with masks.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
According to HTTP/1.0 standard the HTTP reply consist of
* Status Line + CRLF
* Zero or more Response Header Fields (each ended with CRLF)
* CRLF on new line (Response Header Fields end marker)
* Optional Entity Body.
Thus in response headers we state:
Content-Length = 30
but actual transferred file data is:
"\r\n<html><body>Hi</body></html>\r\n".
This is 32 bytes of data.
So we get and check for correctness 32 bytes of data, but
* The response we are used is incorrect, real server will
set Content-Length to 32.
* default_wget_info->hdr_cont_len will be set to wrong
value 30 (used for efi http booting).
Fix an issue by:
* replace bogus response with an actual response from the HTTP server
* format response to show HTTP response structure
* recalculate md5sum as transferred file data has been changed.
The server response was captured with the commands
echo -ne "<html><body>Hi</body></html>\n" > ~/public_html/test.html
echo -ne "GET /~${USER}/test.html HTTP/1.0\r\n\r\n" | netcat localhost 80 >reply.txt
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Changes:
* update to new tcp stack
* fix zero values for ISS and IRS issue (see RFC 9293)
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Since net_test_wget() is testing a command and is in test/cmd it should
be in the 'cmd' test suite, not 'lib'.
Saving and restoring the values of the environment variables that the
test manipulates is necessary to avoid a regression when running the
whole ut test suite. A minimal reproducer is:
$ ./u-boot -T -c "ut cmd net_test_wget; ut dm dm_test_eth_act" | \
grep -E "(Test:|Failures:)"
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
ut_check_console_line() does include an assert.
Pass the result to ut_assertok().
Addresses-Coverity-ID: 514958 Error handling issues
Fixes: 7dfafcd65e ("test: unit test for hash command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In the message string " %s[%d]\t[0x%llx-0x%llx], 0x%08llx bytes flags: "
a comma is missing before flags.
To avoid increasing the code size replace '0x%' by '%#'.
Printing the size with leading zeros but not the addresses does not really
make sense. Remove the leading zeros from the size output.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
[trini: Fix test/cmd/bdinfo.c for these changes]
Signed-off-by: Tom Rini <trini@konsulko.com>
For printing size_t we must use %zd and not %ld to avoid
a -Wformat error on 32-bit systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We want to completely initialize the mbr and embr buffers. This requires
passing the buffer size and not the size of a pointer to the buffer.
Addresses-Coverity-ID: 510454 Wrong sizeof argument
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Rather than enabled DEBUG and using assert(), use the unit-test
functions now provided.
Drop a check that causes pytest to fail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
The command test was the very first test written in U-Boot, some 12
years ago. It predates the unit-test subsystem and was never converted
over.
There is no particular need for the command test to have its own
command. It is also confusing to have it separate from the normal test
suites. At present this test is not run in CI.
Move it into the cmd suite instead, updating it to become a unit test.
One of the checks is dropped to avoid an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the lib/
directory, since that is where compression is implemented.
Rename it to just 'command', since it is obviously a unit test and the
_ut suffix does not add much except to make it different from the names
of other test files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the cbsysinfo command to show the contents of the CMOS option
table.
While we are here, add some example output for this command, along with
mention of what the unimplemented tags are.
Signed-off-by: Simon Glass <sjg@chromium.org>
When reading/writing to memory we cannot assume that a base address of
0x0 is correct and functional. So use CONFIG_SYS_LOAD_ADDR as the base
from which we add a bit more padding and being our tests.
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, the "dm" suite in unit tests (ut) is only available on
sandbox. Make sure that all cmd tests that are part of this suite are
only available on sandbox and not attempted to be run on hardware (where
it will fail to be able to be started).
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to obtain the results of MSR queries as well as to update
MSR registers, so add a command these tasks.
Signed-off-by: Simon Glass <sjg@chromium.org>
The default font is proportional, with different character widths.
Select a monospace font for coreboot so that the 'dm tree' output lines
up correctly.
Update the coreboot tests to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
