This test doesn't belong at the top level. Move it into the lib/
directory, to match (most of) its implementation. Rename it to drop the
unnecessary _ut suffix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
There is no particular need for bloblist to have its own test suite.
Move it into the common suite instead.
Add the missing help for 'common'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the common/
directory, to match its implementation. Rename it to drop the
unnecessary _ut suffix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the boot/
directory, to match its implementation.
This test is currently dependent on bloblist, but the real dependency is
on sandbox, so update that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
Rather than enabled DEBUG and using assert(), use the unit-test
functions now provided.
Drop a check that causes pytest to fail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
The command test was the very first test written in U-Boot, some 12
years ago. It predates the unit-test subsystem and was never converted
over.
There is no particular need for the command test to have its own
command. It is also confusing to have it separate from the normal test
suites. At present this test is not run in CI.
Move it into the cmd suite instead, updating it to become a unit test.
One of the checks is dropped to avoid an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the lib/
directory, since that is where compression is implemented.
Rename it to just 'command', since it is obviously a unit test and the
_ut suffix does not add much except to make it different from the names
of other test files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
There is no particular need for compression to have its own test suite.
Move it into the lib suite instead.
Add the missing help for 'common' and update the docs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the lib/
directory, since that is where compression is implemented.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
The trace feature is now tested in CI so there is no need for these old
script. Also they don't work. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This pointer is not used any more, so drop the declarations.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This test doesn't belong at the top level. Move it into the common/
directory, to match its implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
This flag was lost by a previous change and has never been restored.
Without it, binman cannot fully handle missing blobs which are
themselves inputs to mkimage.
Discussion on this at [1] indicated that this was necessary but the
patch was not updated.
Restore the flag so that all missing blobs are reported.
Link: https://patchwork.ozlabs.org/project/uboot/patch/20221206020336.315465-1-trini@konsulko.com/
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 93685d0dcb ("Makefile: With BINMAN_ALLOW_MISSING=1 don't error")
qemu_arm64_defconfig with CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=n leads to a
build error:
arch/arm/lib/crt0_64.S:85:
Error: constant expression expected at operand 2 --
`ldr x0,=((CFG_SYS_INIT_RAM_ADDR+CFG_SYS_INIT_RAM_SIZE-480))'
We do not define CFG_SYS_INIT_RAM_ADDR and CFG_SYS_INIT_RAM_SIZE for QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We have only implemented longjmp() on the EFI architectures.
Define a symbol CONFIG_HAVE_SETJMP and have it selected by the relevant
architectures.
Use CONFIG_HAVE_SETJMP to decide if the longjmp test shall be built.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Avoid a build failure when building with CONFIG_API=y, CONFIG_EXAMPLES=y:
lib/vsprintf.c:312:14: warning:
‘device_path_string’ defined but not used [-Wunused-function]
312 | static char *device_path_string(char *buf, char *end, void *dp, int field_width,
| ^~~~~~~~~~~~~~~~~~
Fixes: 64b5ba4d29 ("efi_loader: make device path to text protocol customizable")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The lib_test_uuid_to_le and lib lib_test_dynamic_uuid tests fail on
32-bit systems. But we never caught this in our CI because we never
ran any of our C unit tests on 32-bit.
Enable CONFIG_UNIT_TEST on qemu_arm_defconfig.
hextoul() cannot convert a string to a 64-bit number on a 32-bit system.
Use the new function hextoull() instead.
Link: https://lore.kernel.org/r/20241103224223.195255-1-heinrich.schuchardt@canonical.com
The lib_test_uuid_to_le test fails on 32-bit systems. But we never caught
this in our CI because we never ran any of our C unit tests on 32-bit.
Enable CONFIG_UNIT_TEST on qemu_arm_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
We now can use a combination og lwIP & mbedTLS and download from
https://. Describe the config options needed to enable it as well
as some limitations
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
QEMU already has an lwip variant of a defconfig. That defconfig
is also configured with mbedTLS by default. So let's enable the
remaining config options to enable wget for https:// as well
and test that codepath in the CI
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
With the recent changes of lwip & mbedTLS we can now download from
https:// urls instead of just http://.
Adjust our wget lwip version parsing to support both URLs.
While at it adjust the default TCP window for QEMU since https seems to
require at least 16384
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
SNI, or Server Name Indication, is an addition to the TLS encryption
protocol that enables a client device to specify the domain name it is
trying to reach in the first step of the TLS handshake, preventing
common name mismatch errors and not reaching to HTTPS server that
enforce this condition. Since most of the websites require it nowadays
add support for it.
It's worth noting that this is already sent to lwIP [0]
[0] https://github.com/lwip-tcpip/lwip/pull/47
Signed-off-by: Javier Tia <javier.tia@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The current code support mbedTLS 2.28. Since we are using a newer
version in U-Boot, update the necessary accessors and the lwIP codebase
to work with mbedTLS 3.6.0. It's worth noting that the patches are
already sent to lwIP [0]
While at it enable LWIP_ALTCP_TLS and enable TLS support in lwIP
[0] https://github.com/lwip-tcpip/lwip/pull/47
Signed-off-by: Javier Tia <javier.tia@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Since lwIP and mbedTLS have been merged we can tweak the config options
and enable TLS1.2 support. Add RSA and ECDSA by default and enable
enough block cipher modes of operation to be comatible with modern
TLS requirements and webservers
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We don't do anything with Content-Length except a debug print, and the
strict_strtoul() call is incorrect (it always returns -EINVAL and leaves
content_length to zero due to the presence of trailing characters after
the decimal valuoe of Content-Length). So let's just drop this piece of
code.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Add manufacturing environment into STM32MP15xx DH electronics DHSOM
configuration. This environment is part of every board build, but only
takes effect on systems booted with the dh,stm32mp15xx-dhcor-testbench
device tree, i.e. systems populated with factory build of U-Boot.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Deduplicate defconfigs for all DH STM32MP1xx DHSOM systems by factoring
out the common parts into generic stm32mp_dhsom.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all DH STM32MP1xx DHSOM systems.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Deduplicate defconfigs for all DH STM32MP15xx DHSOM systems by factoring
out the common parts into generic stm32mp15_dhsom.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all DH STM32MP15xx DHSOM systems.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The ethernet0_rmii_pins_a pinmux change has no effect on any
DHSOM based hardware. The mco2_pins_a and mco2_sleep_pins_a
are both part of stm32mp15-pinctrl.dtsi . Drop both pinmux
changes.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Use RTC available in HW on Kria SOM without using emulation that's why
configure it properly and disable emulated one.
Power on reset value of RTC Calibration register without battery backup is
not matching with crystal frequency which leads to RTC time drift. That's
why write CALIB_WRITE register with crystal frequency (0x7FFF). There is
also an option to write zero so that Linux will set default value (0x7FFF)
in driver probe but calibration 0 is not permited by DT schema.
Co-developed-by: Srinivas Goud <srinivas.goud@amd.com>
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9b684faeec85381b9b8fe796aaebc2ee79f17b8e.1729663761.git.michal.simek@amd.com
Janne Grunau <j@jannau.net> says:
The changes in "Make LMB memory map global and persistent" [1] break
mapping DMA memory in the USB xHCI driver when using the apple_dart
iommu present on Apple silicon systems.
The IOVA space used by the u-boot driver (low 4GB) and physical memory
do not overlap. The physical memory on this systems starts depending on
the SoC either at 0x10_0000_0000 or 0x100_0000_0000. It make no sense to
manage these distinct regions in a single LMB map. In addition every
device has its own iommu and IO address space so sharing a single memory
map between all iommu instances is not necessary.
To fix this issue restore the used subset (add, alloc and free) of the
previous pointer based LMB interface with "io_" as prefix.
To ensure that low level lmb functions do not use the global LMB
variable reorder lib/lmb.c so that the variable is not visible.
Tested with patches from my "Fix device removal order for Apple dart
iommu" series [2] to fix a separate issue.
The cosmetic commit has two checkpatch warnings in existing code which I
ignored.
[1] https://lore.kernel.org/u-boot/20240826115940.3233167-1-sughosh.ganu@linaro.org/
[2] https://lore.kernel.org/u-boot/20241031-iommu_apple_dart_ordering-v1-0-8a6877946d6b@jannau.net/
Link: https://lore.kernel.org/r/20241111-io_lmb_apple_dart_iommu-v3-0-32c05da51d72@jannau.net
Signed-off-by: Tom Rini <trini@konsulko.com>
There is no overlap between the IOVA space managed by the iommu (here
the 32-bit address space) and physical RAM on Apple silicon systems. The
RAM starts at 0x10_0000_0000 or 0x100_0000_0000 so it's not possible to
manage the IOVA with the global memory LMB and use 1:1 translation.
In addition each device has its own iommu and does not need to share the
address space with all other devices. This should not be problem for
u-boot's limited use and hardware support.
Restore the private per instance LMB IOVA map.
Fixes: ed17a33fed ("lmb: make LMB memory map persistent and global")
Signed-off-by: Janne Grunau <j@jannau.net>
These functions can be used with struct lmb pointers and will be used to
manage IOVA space in the apple_dart iommu driver. This restores part of
the pointer base struct lmb API from before commit ed17a33fed ("lmb:
make LMB memory map persistent and global").
io_lmb_add() and io_lmb_free() can trivially reuse exisiting lmb
functions. io_lmb_setup() is separate for unique error log messages.
io_lmb_alloc() is a simplified copy of _lmb_alloc_base() since the
later has unused features and internal use of the global LMB memory map.
Signed-off-by: Janne Grunau <j@jannau.net>
Low lovel LMB functionality will be used to manage IOVA space in the
Apple dart iommu driver. This reordering ensures that those function
can not access the global LMB memory map variable.
Signed-off-by: Janne Grunau <j@jannau.net>
It will be re-used with a lmb list pointer as argument for IOVA
allocations in the apple_dart iommu driver.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Janne Grunau <j@jannau.net>
If TPL_GPIO and TPL_PINCTRL_ROCKCHIP are enabled and a sysreset-gpio is
provided in the TPL Device Tree, this will trigger a system reset
similar to what's currently been done in SPL whenever the RK3399 "warm"
boots. Because there's currently only one user of sysreset-gpio logic,
and TPL is enabled on that board, so let's migrate the logic and that
board to do it in TPL.
There are three reasons for moving this earlier:
- faster boot time as we don't need to reach SPL to be able to reset the
system on a condition we know is already met in TPL,
- have less code to be impacted by the issue this system reset works
around (that is, "unclean" SoC registers after a reboot),
- less confusion around the reason for restarting. Indeed when done from
SPL, the following log can be observed:
"""
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
Channel 0: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45 +0100)
Trying to boot from MMC2
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
"""
possibly hinting at an issue within the SPL when loading the fitImage
from MMC2 instead of the normal course of events (a system reset).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This defines a weak tpl_board_init function that can be used for running
board/SoC-specific code before the DRAM init happens, similarly to
spl_board_init() for SPL.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
To prepare to support forcing power on reset from TPL which would have
the exact same logic, just in an earlier stage, let's merge the CRU
check that triggers the power on reset with the rest of the logic.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
