Beagle Play has a different boot flow than the AM62x SK EVM.
AM62x SK EVM:
1. Boot rom reads UDA (User Data Area), looking for tiboot3
2. Boot rom finds tiboot3 and loads it
Beagle Play:
1. Boot rom looks for tiboot3 in mmc0boot0
2. Boot rom finds tiboot3 and loads it
Because of this difference, we need to have a different
partitioning table than the generic TI one.
Include generic TI android support and override the partitioning table
to boot Android.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Acked-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The Kernel Image and DTB files are supposed to be picked from the rootfs
of the SD Card, this fails in legacy boot flow because bootpart is set
to 1:1. Fix it.
Fixes: a200f428b5 ("board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file")
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Unfortunately when enabling FDT fixups for the AM62x family of SoCs and
moving TF-A to the bottom of RAM we missed the BeaglePlay. This is
causing Linux's memory allocator to clobber TF-A and break its boot.
Enable OF_SYSTEM_SETUP to fixup the kernel's FDT to inform it of the
actual location of the firmware
CC: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the
BeagleBoneAI64.
Note this involved creating BeagleBoneAI64's own beagleboneai64.h board
header file instead of reusing j721e_evm's.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the
BeaglePlay.
Note this involved creating BeaglePlay's own beagleplay.h board header file
instead of reusing am62_evm's.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Martyn Welch <martyn.welch@collabora.com> says:
This series adds DFU support for TI AM62 SK and beagleplay boards.
I have picked this series up from Sjoerd due to time constraints.
Since the last revision:
* Removed dwc3 mode setting in favour of reinstating forced peripheral
mode for usb0
* Use of config fragments for both r5 and a53 DFU configuration to
reduce duplication
* Typographical improvements to documentation
We plan to also submit the dts changes to linux so that those can be
dropped again in the near future (hopefully)
DFU mode on a beagleplay can be used via the Type-C connector by holding
the USR switch while powering on.
Configuration is already provided as fragments for both the A53 and R5
u-boot parts. Include the am62x_a53_usbdfu.config config. The
am62x_r5_usbdfu.config fragment needs to be added should DFU boot be
required as this will disable booting from persistent storage due to
binary size constraints.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Nishanth Menon <nm@ti.com> says:
Hi,
Rev 2 of the series.
This is a follow up from [1] - Without the 32k crystal configuration,
wlan doesn't work. Debounce is needed for HDMI Hot plug detect(hpd)
gpio interrupt not storming.
At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.
Series is now based off master branch.
Bootlog: https://gist.github.com/nmenon/75df38bee907785d1d78d1ec4abd7304
Changes from V2:
- Removed depedency on [2] - depending on which way
the merge sequence goes, one of the series will need a rebase.
- Added a patch for a bug that Jan noticed
- Fixup for the fat finger missing 0x in 0x4080 :(
[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
[2] https://lore.kernel.org/u-boot/20240212194726.1093771-1-nm@ti.com/
We had enabled USB and network pxe boot with the hope to get it all
merged on time. However, it has not panned out. Drop usb and pxe boot
else bootflow scan -l throws in:
a) Unknown uclass 'usb' in label
b) Crashes when attempting pxe - cpsw/mdio driver apparently has missing
error handling of what ever form. This is the one that Jan noticed in
his log.
We can enable these on a later date once things are working.
Cc: Roger Quadros <rogerq@kernel.org>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/782ea2c0-eef5-478d-a122-cc6e2d066762@siemens.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable the external 32k crystal similar to that found on other
production AM62X board. The trim settings for the crystal is board
dependent, so the sequences tend to be board specific. Since this is
a configuration that needs to be done prior to DM managing the system
and all other muxes get set, do the same from R5 context.
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Stop using the findfdt script and switch to setting the fdtfile from C
code.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Stop using the findfdt script and switch to setting the fdtfile from C
code.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Clean up all configuration files to adhere to yamllint rules.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
[trini: Update more yaml files added since this was posted]
Signed-off-by: Tom Rini <trini@konsulko.com>
Suggested-by: Nishanth Menon <nm@ti.com>
BeagleBoard.org BeagleBone AI-64 is an open source hardware single
board computer based on the Texas Instruments TDA4VM SoC featuring
dual-core 2.0GHz Arm Cortex-A72 processor, C7x+MMA and 2 C66x
floating-point VLIW DSPs, 3x dual ARM Cortex-R5 co-processors,
2x 6-core Programmable Real-Time Unit and Industrial Communication
SubSystem, PowerVR Rogue 8XE GE8430 3D GPU. The board features 4GB
DDR4, USB3.0 Type-C, 2x USB SS Type-A, miniDisplayPort, 2x 4-lane
CSI, DSI, 16GB eMMC flash, 1G Ethernet, M.2 E-key for WiFi/BT, and
BeagleBone expansion headers.
This board family can be indentified by the BBONEAI-64-B0 in the
at24 eeprom:
[aa 55 33 ee 01 37 00 10 2e 00 42 42 4f 4e 45 41 |.U3..7....BBONEA|]
[49 2d 36 34 2d 42 30 2d 00 00 42 30 30 30 37 38 |I-64-B0-..B00078|]
Baseline of the devicetree is from v6.6-rc1
https://beagleboard.org/ai-64https://git.beagleboard.org/beagleboard/beaglebone-ai-64
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Move the omap3 beagle to the beagle vendor folder representing
BeagleBoard.org platforms.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.
This forms the starting point for new beagle platforms added under it's
own board vendor folder.
As part of this create all the associated files with a bare minimum
beagleplay.c file.
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>
