Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
These are a number of assorted upstream Linux fixes to the
BRCMNAND driver.
This patch set lowers the hamming distance between the Linux
and U-Boot drivers a bit as well, while we deviate quite
a bit it is still possible to bring fixes over thanks to
exercises like this.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/22535
Backport from the upstream Linux kernel
commit c2cf7e25eb2a3c915a420fb8ceed8912add7f36c
"mtd: rawnand: brcmnand: Add support for getting ecc setting from strap"
Note: the upstream kernel introduces a new
bool brcmnand_get_sector_size_1k() function because the int
version in U-Boot has been removed in Linux. I kept the old
int-returning version that is already in U-Boot as we depend
on that in other code.
BCMBCA broadband SoC based board design does not specify ecc setting in
dts but rather use the SoC NAND strap info to obtain the ecc strength
and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
this purpose and update driver to support this option. However these two
options can not be used at the same time.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Tested-by: William Zhang <william.zhang@broadcom.com>
Backport of upstream Linux
commit 8e7daa85641c9559c113f6b217bdc923397de77c
"mtd: rawnand: brcmnand: Support write protection setting from dts"
Augmented to also support the "write-protect" boolean property.
The write protection feature is controlled by the module parameter wp_on
with default set to enabled. But not all the board use this feature
especially in BCMBCA broadband board. And module parameter is not
sufficient as different board can have different option. Add a device
tree property and allow this feature to be configured through the board
dts on per board basis.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
This is a port of the read data bus interface from the Linux
brcmnand driver, commit 546e425991205f59281e160a0d0daed47b7ca9b3
"mtd: rawnand: brcmnand: Add BCMBCA read data bus interface"
This is needed for the BCMBCA RAW NAND driver.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Backport from upstream Linux
commit 60177390fa061c62d156f4a546e3efd90df3c183
"mtd: rawnand: brcmnand: Fix mtd oobsize"
brcmnand controller can only access the flash spare area up to certain
bytes based on the ECC level. It can be less than the actual flash spare
area size. For example, for many NAND chip supporting ECC BCH-8, it has
226 bytes spare area. But controller can only uses 218 bytes. So brcmand
driver overrides the mtd oobsize with the controller's accessible spare
area size. When the nand base driver utilizes the nand_device object, it
resets the oobsize back to the actual flash spare aprea size from
nand_memory_organization structure and controller may not able to access
all the oob area as mtd advises.
This change fixes the issue by overriding the oobsize in the
nand_memory_organization structure to the controller's accessible spare
area size.
Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Boot ROM on Meson needs some pages to be read/written in a special mode:
384 byte ECC mode (so called "short" by Amlogic) and with scrambling
enabled. Such pages are located on the chip in the following way (for
example):
[ p0 ][ p1 ][ p2 ][ p3 ][ p4 ][ p5 ][ p6 ][ p7 ] ... [ pN ]
^ ^ ^ ^
pX is page number "X". "^" means "special" page used by boot ROM - e.g.
every 2nd page in the range of [0, 7]. Step (2 here) and last page in
range is read from the device tree.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-4-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
If the function is called with no NAND device attached, then this
function can return error value, proceeding further ignoring the same
can cause system crash. This is seen when "mtd list" is run with no NAND
addon cards connected.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
This is a subset of my previous arm64_be work.
I wish this could be merged first so it would be easier to work
against xtensa and arm64 be support.
So CONFIG_SYS_BIG_ENDIAN is our cross architecture option for
selecting machine endian, while the old CONFIG_CPU_BIG_ENDIAN
is defined by Arc only.
Use it whenever possible to ensure big endian code path is enabled
for all possible big endian machines.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Once a page is read with higher bitflips all subsequent reads
are returning the same bitflip value even though they have none.
max_bitflip variable is not being reset to 0 across page reads.
This is causing problems like incorrectly
marking erase blocks bad by UBI and causing read failures.
Verified the change with both MTD reads and UBI.
This change is inline with other NFC drivers.
Sample error log where a block is marked bad incorrectly:
ubi0: fixable bit-flip detected at PEB 125
ubi0: run torture test for PEB 125
ubi0: fixable bit-flip detected at PEB 125
ubi0 error: torture_peb: read problems on freshly erased PEB 125,
must be bad
ubi0 error: erase_worker: failed to erase PEB 125, error -5
ubi0: mark PEB 125 as bad
Link: https://lore.kernel.org/all/ea0422cd-a8e6-3c36-f551-a0142893301b@marvell.com
Signed-off-by: rminnikanti <rminnikanti@marvell.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: rminnikanti <rminnikanti@marvell.com>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Michal Simek <michal.simek@amd.com> says:
I looked as cleaning up some dependencies and I found that qconfig is
reporting some issues. This series is fixing some of them. But there are
still some other pending. That's why please go and fix them if they are
related to your board.
UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in
a loop you will find some other issue with copyright chars or some issues
in files taken from the Linux kernel like DTs. They should be likely fixed
in the kernel first.
Based on discussion I am ignoring names too.
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or
names are converted.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Behún <kabel@kernel.org>
FMC2 IP supports up to 4 chip select. On MP1 SoC, only 2 of them are
available when on MP25 SoC, the 4 chip select are available.
Let's use a platform data structure for parameters that will differ.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The first patch is by Weizhao Ouyang and avoids sf probe crashes.
The second patch is by Arseniy Krasnov and adds basic support for Amlogic
Meson NAND controller on AXG.
The following four patches are by Alexander Dahl and apply some fixes to
drivers/mtd/nand/raw/ and port some changes applied in Linux.
The following patch is by Bruce Suen and adds support for XTX SPINAND.
Finally, the last patch is again by Arseniy Krasnov and adds access to
OTP region, supporting info, dump, write and lock operations.
Introduced in upstream Linux with commit 7a08dbaedd365 for release v5.0.
When the new atmel nand driver was backported to U-Boot with commit
6a8dfd5722 ("nand: atmel: Add DM based NAND driver") that definition
was added to the driver instead of the header file. Move it over to the
other definitions with the same help text it has in Linux.
Code actually using this has not been ported over to raw nand base yet.
Link: https://lore.kernel.org/all/20240320090214.40465-3-ada@thorsis.com
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
These removed definitions were specific to some sam9 SoCs, but not
generic over all at91 SoCs. The correct SoC specific definitions for
ATMEL_BASE_PMECC are spread over different header files in
arch/arm/mach-at91/include/mach directory.
Fixes a build error on a custon board based on SAMA5D2:
Building current source for 73 boards (16 threads, 1 job per thread)
arm: + vera2
+drivers/mtd/nand/raw/atmel/pmecc.c:819: warning: "ATMEL_BASE_PMECC" redefined
+ 819 | #define ATMEL_BASE_PMECC 0xffffe000
+ |
+In file included from include/configs/vera2.h:11,
+ from include/config.h:3,
+ from include/linux/mtd/rawnand.h:16,
+ from drivers/mtd/nand/raw/atmel/pmecc.c:44:
+include/asm/arch/sama5d2.h:171: note: this is the location of the previous definition
+ 171 | #define ATMEL_BASE_PMECC (ATMEL_BASE_HSMC + 0x70)
+drivers/mtd/nand/raw/atmel/pmecc.c:820: warning: "ATMEL_BASE_PMERRLOC" redefined
+ 820 | #define ATMEL_BASE_PMERRLOC 0xffffe600
+include/asm/arch/sama5d2.h:172: note: this is the location of the previous definition
+ 172 | #define ATMEL_BASE_PMERRLOC (ATMEL_BASE_HSMC + 0x500)
Fixes: a490e1b7c0 ("nand: atmel: Add pmecc driver")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
AM335x uses a special driver "am335x_spl_bch.c" as SPL
NAND loader. This driver expects 1 sector at a time ECC
and doesn't work well with multi-sector ECC that was implemented in
commit 04fcd25873 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Additionally, the omap_elm driver does not support multi sector ECC and will
need more work and tests to get multi sector working correctly on all
platforms.
Switch back to 1 sector at a time read/ECC.
Fixes: 04fcd25873 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Enrico Leto <enrico.leto@siemens.com>
Tested-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20231211114600.4414-2-rogerq@kernel.org/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
