CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22211
- Enable SPI NOR flash support and MTD partitions for phycore_imx8mp.
- Convert mx6slevk to OF_UPSTREAM and watchdog DM.
- Cleanup some mx5/mx6 USB options.
- Make PLL settings configurable at board level.
- Set CONFIG_SPL_LOAD_FIT_ADDRESS for verdin-imx8m/p.
- Make the mxc-gpio reading state of GPIO pins in output mode to be
consistent with the Linux kernel.
- Add HUK derivation support for ELE AHAB.
The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW)
can be removed from mx5/mx6/mx7/mx8m board config files as it is the
default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it
can be removed from all the imx6/imx7/imx8m board config files.
mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The SD card is registered as mmc device 0.
Fix it accordingly so that the board can boot to Linux
from the SD card.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fix signed vs unsigned compare in read check in _spl_load()
Issue: when info->read() returns a negative value because of an error,
the comparison of 'read' (signed) with 'sizeof(*header)'
(unsigned silently converts the negative value into a very
large unsigned value and the check on the error condition
always return false, i.e. the error is not detected
Symptoms: if spl_load_image_fat() is unable to find the file 'uImage',
the SPL phase of the boot process just hangs after displaying
the following line:
Trying to boot from MMC1
Fix: cast 'sizeof(*header)' to int so the compare is now between
signed types
Reference: https://stackoverflow.com/questions/17293749/sizeof-operator-in-if-statement
Signed-off-by: Franco Venturi <fventuri@comcast.net>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The sandbox pinmux driver is used in the non-test devicetree as well as
the test one. I didn't realize this when I modified the driver for
tests, and so broke the regular use case (which only resulted in
warnings). First, making the pinmux and the UART group available
pre-relocation to avoid ENODEV errors. Then, convert the pin groups and
functions to the new style, adding onewire group as well.
Fixes: 7f0f1806e3 ("test: pinmux: Add test for pin muxing")
Closes: https://source.denx.de/u-boot/u-boot/-/issues/2
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This series started as a small fix for checking for an empty line,
but in the process several other problems were found and fixed:
- fix tests which use console recording but don't set the flag
- drop unnecessary resetting of the console in tests
- drop unnecessary blank line before MMC output
- update the docs a little
- fix buildman test failure on newer Pythons
- a few other minor things
This series also renames the confusing flag names, so that they are
easier to remember - just a UTF_ (unit-test flags) prefix.
The _REC suffix doesn't add much. Really what we want to know is whether
the test uses the console, so rename this flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing implementation of ut_assert_nextline_empty() cannot
distinguish between an empty line and no line at all. It can in fact be
called at the end of the recorded output and will happily return
success.
Adjust the logic so that this condition is detected. Show a failure
message in this case.
Fix the one test which falls foul of this fix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 400175b0a7 ("test: Add a way to check each line of console...")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If the environment is not enabled we don't need these fields in
global_data. Make them conditional.
Make these fields conditional. Move env_buf up one so it can share
an #ifdef.
Signed-off-by: Simon Glass <sjg@chromium.org>
The early malloc region is normally quite small and is certainly less
than 4GB, so use a 32-bit value for the limit and pointer. Update the
comments for clarity while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
This value mirrors information recorded by driver model video drivers,
so can be removed to save space. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some of the logging fields are larger than they need to be. Shrink them
and adjust the ordering to improve alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is the length of the U-Boot binary, which is typically 200-800KB
and certainly not larger than 4GB. Use a 32-bit value to save space in
global_data and move it up to be with fields of the same alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bus clock and memory clock are unlikely to go above 4GHz for now, so
reduce the field size to 32 bits.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move all the fields which are always present to the top of the struct,
so we can potentially save some space by taking note of alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function to locate this information, rather than doing it
automatically on startup, to save space in global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
This value is only really used before relocation. There is not much use
to showing its value in bdinfo, so drop it. Move it to the new boardf
struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
Quite a few of the members of struct global_data are only used before
reloction, or have little meaning afterwards, yet they hang around in
struct global_data for the lifetime of U-Boot. This uses up precious
pre-relocation SRAM on many boards.
To help with this, start a new struct which exists only before
relocation. Move new_fdt into this new struct. Drop the display of it
in the 'bdinfo' command as it is probably not very useful.
Note that the field does not exist in SPL builds.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use shorter types for some of these fields to save space. Reorder to put
fields with like alignment together.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need a full word for this boolean value. Convert it into a flag
to save space in global_data.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new function which returns the framebuffer address of the first
video device. This will allow the global_data field top be dropped.
Signed-off-by: Simon Glass <sjg@chromium.org>
Only m68k and powerpc use this field, so move it to the arch-specific
info, to reduce the size for other archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the comment to match the function. Fix the indentation while we
are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Rather than declaring completely separate functions, put the code for
each case into the same function. This makes it easier to read.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Unless function names are requested, the logging system should not
compile these into the code. Adjust the macros to handle this.
This means that turning on function names at runtime won't work unless
CONFIG_LOGF_FUNC is enabled. We could perhaps split this into a
separate option if that is a problem.
Enable CONFIG_LOGF_FUNC logging for sandbox since the tests expect the
function names to be included. Fix up the pinmux test which checks a
logging statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Remove several comments that do not apply anymore to
the current file content.
While at it, write 'PMIC' into a single line for consistency.
Signed-off-by: Fabio Estevam <festevam@denx.de>
This command allows easy update on SD card or eMMC of the flash.bin
generated (with binman) during u-boot build.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Benjamin Hahn <B.Hahn@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
android_image_get_ramdisk() will return an error if there is no ramdisk.
Using the android image without a ramdisk worked until commit
1ce8e10f3b ("image: Fix up ANDROID_BOOT_IMAGE ramdisk code") because
the return code wasn't checked until then. Return -ENOENT in case
there is no ramdisk and translate that into -ENOPKG in the calling
code, which will then indicate "no ramdisk" to its caller
(boot_get_ramdisk()).
This way, we can get rid of the "*rd_data = *rd_len = 0;" in the error
path, too.
With this, I'm able to boot a linux kernel using fastboot again:
fastboot --base 0x41000000 --header-version 2 --dtb /path/to/dtb \
--cmdline "root=/dev/mmcblk0p1 rootwait" boot path/to/Image
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20240729213657.2550935-1-mwalle@kernel.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
u-boot-dfu-next-20240820
- Migrate Atmel usb gadget to DM_USB_GADGET
- More small cleanups/improvements on the atmel UDC driver
- Change udc uclass name from "usb" -> "usb_gadget"
