Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
Complete this rename for all directories outside arch/ board/ drivers/
and include/
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
Christian Marangi <ansuelsmth@gmail.com> says:
This series is a reworked version of the previous seried:
misc: introduce STATUS LED activity function
This series port and expand the legacy concept of LED boot from
the legacy Status LED API to new LED API.
One thing that many device need is a way to communicate to the
user that the device is actually doing something.
This is especially useful for recovery steps where an
user (for example) insert an USB drive, keep a button pressed
and the device autorecover.
There is currently no way to signal the user externally that
the bootloader is processing/recoverying aside from setting
a LED on.
A solid LED on is not enough and won't actually signal any
kind of progress.
Solution is the good old blinking LED but uboot doesn't
suggest (and support) interrupts and almost all the LED
are usually GPIO LED that doesn't support HW blink.
Additional Kconfg are also introduced to set the LED boot and
activity. Those are referenced by label.
A documentation for old and these new LED API is created.
Expand ofnode options test with new generic helper for bool, int and
string.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add tests for LED boot and activity feature and add required property in
sandbox test DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Calling u_boot_console.restart_uboot() in
test_efi_selftest_watchdog_reboot() may lead to incorrect results.
While the watchdog triggered reboot is running thee test environment may
need some time before triggering a reboot itself. This may lead to
duplicate output of the U-Boot greeter which is recorded as an error.
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: df172e117d ("test/py: test reboot by EFI watchdog")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In case a regulator DT node contains regulator-always-on or regulator-boot-on
property, make sure the regulator gets correctly configured by U-Boot on start
up. Unconditionally probe such regulator drivers. This is a preparatory patch
for introduction of .regulator_post_probe() which would trigger the regulator
configuration.
Parsing of regulator-always-on and regulator-boot-on DT property has been
moved to regulator_post_bind() as the information is required early, the
rest of the DT parsing has been kept in regulator_pre_probe() to avoid
slowing down the boot process.
Signed-off-by: Marek Vasut <marex@denx.de>
When running the bootstage tests currently we get a warning like:
tests/test_bootstage.py::test_bootstage_stash
...PytestReturnNotNoneWarning: Expected None, but tests/test_bootstage.py::test_bootstage_stash returned (37748736, 4096), which will be an error in a future version of pytest. Did you mean to use `assert` in stead of `return`?
This is because the unstash test will run the stash test and fetch the
addr / size from that. Rework the test to be stash and unstash and then
run the unstash command at the end of the current stash test.
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
The normal approach with sandbox is to use a fixed memory address in the
RAM, to avoid needing to create a map for transient local variables.
Update this test to use this approach.
Signed-off-by: Simon Glass <sjg@chromium.org>
It isn't that important to factor out constants in tests, but in this
case we have 0x200 and 512 used. The commands don't use the constant
as they use a block count ('1'). It doesn't create more code to use a
constant, so create one.
Signed-off-by: Simon Glass <sjg@chromium.org>
This tests maps some local variables into sandbox's address space. Make
sure to unmap them afterwards.
Note that the normal approach with sandbox is to use a fixed memory
address in the RAM, to avoid needing to create a map for transient local
variables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 04291ee0ab ("cmd: mbr: Allow 4 MBR partitions without need...")
U-Boot commands typically don't need 0x to specify hex, since they use
hex by default. Adding 0x in this test is confusing since it suggests
that it is necessary. Drop it from the file.
Also use the %#x construct to get the 0x when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Clear any USB-keyboard devices before running a unit test, to avoid
using a stale udevice pointer in stdio. Add a long comment to explain
this situation and why this solution seems best, at least for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Set up a function for this, since it needs to be used from multiple test
files.
This test file is only used on sandbox, where USB is enabled, so drop
the local declaration of usb_started
Signed-off-by: Simon Glass <sjg@chromium.org>
Tidy up most of these warnings. Remaining are four of these:
R0914: Too many local variables
which can only by fixed by splitting things into functions, so that is
left for another time.
Part of this change was done by the flynt tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Francis Laniel <francis.laniel@amarulasolutions.com> says:
Hi!
With this series, I bumped the new hush to get the latest commits from upstream.
Also, I added back a reverted commit which goal was to fix a bad behavior in
old hush test.
I had to tweak a bit this commit, but everything worked both locally and in the
CI.
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
This was done to keep compatibility with the existing behavior.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With e58bafc35f ("lib: membuff: fix readline not returning line in case of overflow")
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_skipline();
}
ut_assert_console_end();
The if block mentioned above that calls console_record_reset_enable() is
completely removed as fixed by e58bafc35f.
[flaniel: adapt second if]
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
[flaniel: remove console_record_reset_enable() if]
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Add some basic unit tests to validate that the UUID generation behaves
as expected. This matches the implementation in efi_loader for sandbox
and a Qualcomm board and should catch any regressions.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
If erase/write/read size is 0 then it throws the mentioned error message
when debug message ie enabled as per 899fb5aa8b ("cmd: sf/nand: Print
and return failure when 0 length is passed"), setting it to None as
debug message is not enabled by default for testing.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Implement trivial extension to the sandbox PHY, which makes it pretend
to support selecting USB Host mode and nothing else. Any other mode is
rejected with -EINVAL. Any submode except for default submode 0 is
rejected with -EOPNOTSUPP . The implementation behaves in this trivial
way to permit easy unit testing using test which is also added in this
commit.
To run the test, use e.g. sandbox64_defconfig and run U-Boot as follows:
$ ./u-boot -Tc 'ut dm phy_setup'
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
Use the API function list_count_nodes() to count the number of list
entries.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add test cases for sf commands to verify various SPI flash operations
such as erase, write and read. It also adds qspi lock unlock cases.
This test relies on boardenv_* configurations to run it for different
SPI flash family such as single SPI, QSPI, and OSPI.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Simon Glass <sjg@chromium.org> says:
This series started as a small fix for checking for an empty line,
but in the process several other problems were found and fixed:
- fix tests which use console recording but don't set the flag
- drop unnecessary resetting of the console in tests
- drop unnecessary blank line before MMC output
- update the docs a little
- fix buildman test failure on newer Pythons
- a few other minor things
This series also renames the confusing flag names, so that they are
easier to remember - just a UTF_ (unit-test flags) prefix.
It is seldom necessary to call this function. Drop its use in the
command tests.
Add a few extra checks to the wget test so that resetting is not
needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Quite a lot of tests have the same two lines of code at the start. Move
this into the two setup functions to reduce redundancy.
Add a line to check the output from set_working_fdt_addr() since this is
always emitted.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some functions are using asserts but the result of the functions
themselves is not checked. This means that if a test fails, the result
is not noticed until later, which can be confusing to debug.
Add the missing asserts.
Signed-off-by: Simon Glass <sjg@chromium.org>
Set this flag rather than doing things manually in the test.
Drop unnecessary calls to console_record_reset_enable()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
