Files
u-boot/configs/x96_mate_defconfig
Andre Przywara 432e518ba7 sunxi: h616: defconfigs: enable eMMC
Now that eMMC is working properly on H616 devices, it became apparent
that some boards were missing the right defconfig bits to enable eMMC
access.

Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig,
also the eMMC boot option to the TX1. Oddly enough the X96 Mate had
just this bit already.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2025-04-28 12:45:43 -06:00

26 lines
721 B
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h616-x96-mate"
CONFIG_SPL=y
CONFIG_DRAM_SUNXI_DX_ODT=0x03030303
CONFIG_DRAM_SUNXI_DX_DRI=0x0e0e0e0e
CONFIG_DRAM_SUNXI_CA_DRI=0x1c12
CONFIG_DRAM_SUNXI_TPR0=0xc0000c05
CONFIG_DRAM_SUNXI_TPR10=0x2f0007
CONFIG_DRAM_SUNXI_TPR11=0xffffdddd
CONFIG_DRAM_SUNXI_TPR12=0xfedf7557
CONFIG_MACH_SUN50I_H616=y
CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_R_I2C_ENABLE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_AXP305_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y