Sanchayan Maity 08c11cb5df usb: host: ehci-vf: Implement board_usb_phy_mode weak function ...

Add board_usb_phy_mode weak function on similar lines to ehci-mx6.
However since Vybrid USB does not have a true OTG, make this weak
functon just return 0. The function is supposed to be implemented
by the individual boards using a GPIO for providing the OTG pin
functionality.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

2016-01-16 07:06:55 +01:00

..

dwc2.c

usb: dwc2: avoid out of bounds access

2015-12-31 10:05:31 +01:00

dwc2.h

usb: dwc2: Add support for v3 snpsid value

2015-05-29 12:41:04 +02:00

ehci-armada100.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-atmel.c

USB: ehci-atmel: use pcr to enable or disable clock

2014-09-19 00:11:21 +02:00

ehci-exynos.c

usb: host: ehci: samsung: Move hcor initialization after usb phy setup

2015-12-17 21:54:41 +01:00

ehci-faraday.c

dm: usb: Drop the EHCI weak functions

2015-04-18 11:11:24 -06:00

ehci-fsl.c

drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect

2015-06-07 15:46:02 +02:00

ehci-generic.c

usb: add support for generic EHCI devices

2015-12-07 00:14:59 +01:00

ehci-hcd.c

usb: Move determination of TT hub address/port into separate function

2015-12-31 16:16:29 +01:00

ehci-marvell.c

usb: ehci-marvell.c: Add DM support

2015-10-21 02:25:01 +02:00

ehci-mpc512x.c

powerpc/usb:Differentiate USB controller base address

2013-10-24 09:35:09 -07:00

ehci-mx5.c

dm: usb: Drop the EHCI weak functions

2015-04-18 11:11:24 -06:00

ehci-mx6.c

imx: usb: ehci-mx6: wait_for_bit to check reg status

2015-08-19 22:30:20 +02:00

ehci-mxc.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-mxs.c

usb: ehci: mxs: Add board-specific callbacks

2014-09-29 09:02:16 +02:00

ehci-omap.c

usb: ehci-omap: Reset the USB Host OMAP module

2013-12-06 07:02:32 -05:00

ehci-pci.c

dm: usb: Convert echi-pci to use new DM PCI API

2016-01-12 10:19:09 -07:00

ehci-ppc4xx.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-rmobile.c

usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT

2014-11-07 16:32:02 +01:00

ehci-spear.c

usb: spear: Add support for both SPEAr600 EHCI controllers

2015-08-19 22:30:20 +02:00

ehci-sunxi.c

sunxi: usb: Rename the sunxi usb driver DM entry

2015-12-07 00:14:59 +01:00

ehci-tegra.c

dm: Use dev_get_addr() where possible

2015-08-31 07:57:26 -06:00

ehci-uniphier.c

ARM: UniPhier: replace <asm/io.h> with <linux/io.h>

2015-05-31 02:53:56 +09:00

ehci-vct.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-vf.c

usb: host: ehci-vf: Implement board_usb_phy_mode weak function

2016-01-16 07:06:55 +01:00

ehci-zynq.c

ARM: zynq: ehci: Added USB host driver support

2014-05-14 07:43:35 +02:00

ehci.h

usb: ehci: remember init mode

2015-09-07 13:41:05 +02:00

isp116x-hcd.c

include: move various macros to include/linux/kernel.h

2014-11-20 11:28:25 -05:00

isp116x.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Kconfig

usb: add support of generic OHCI devices

2015-12-17 21:54:41 +01:00

Makefile

usb: add support of generic OHCI devices

2015-12-17 21:54:41 +01:00

ohci-at91.c

USB: ohci-at91: use pcr to enable or disable clock

2014-09-19 00:11:20 +02:00

ohci-da8xx.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ohci-ep93xx.c

arm: ep9315: Return back Cirrus Logic EDB9315A board support

2014-07-04 23:45:48 +02:00

ohci-generic.c

usb: add support of generic OHCI devices

2015-12-17 21:54:41 +01:00

ohci-hcd.c

ohci: Add missing cache-flush for hcca area

2015-11-03 17:29:33 +01:00

ohci-lpc32xx.c

usb: lpc32xx: add host USB driver

2015-08-18 13:45:57 -04:00

ohci-s3c24xx.c

include: move various macros to include/linux/kernel.h

2014-11-20 11:28:25 -05:00

ohci-s3c24xx.h

dm: Move s3c24xx USB driver to a proper place

2012-10-18 06:54:18 +02:00

ohci-sunxi.c

sunxi: usb-phy: Never power off the usb ports

2015-08-08 16:26:19 +02:00

ohci.h

usb: ohci: enable cache support

2015-08-12 20:47:48 -04:00

r8a66597-hcd.c

Move console definitions into a new console.h file

2015-11-19 20:27:50 -07:00

r8a66597.h

usb: Update some EHCI driver licenses to use SPDX

2015-07-21 17:39:38 -06:00

sl811-hcd.c

usb: add enum usb_init_type parameter to usb_lowlevel_init

2013-10-20 23:45:26 +02:00

sl811.h

…

usb-sandbox.c

usb: sandbox: Add support for interrupt operations

2015-11-19 20:27:52 -07:00

usb-uclass.c

dm: usb: Remove inactive children after a bus scan

2015-11-19 20:27:52 -07:00

utmi-armada100.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

xhci-dwc3.c

usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook

2015-12-07 00:15:00 +01:00

xhci-exynos5.c

dm: Use dev_get_addr() where possible

2015-08-31 07:57:26 -06:00

xhci-fsl.c

usb: xhci: fsl: Removing unused function usb_phy_reset

2015-12-07 00:15:00 +01:00

xhci-keystone.c

usb: xhci: keystone: Remove common dwc3 drv functions calls

2015-07-22 08:55:44 +02:00

xhci-mem.c

dm: usb: Support driver model in XHCI

2015-04-18 11:11:28 -06:00

xhci-omap.c

usb: host: xhci-omap: fix build break

2015-12-07 00:14:59 +01:00

xhci-pci.c

usb: pci: Add XHCI driver for PCI

2015-02-05 22:16:42 -07:00

xhci-ring.c

dm: usb: xhci: Use a function to get xhci_ctrl

2015-04-18 11:11:28 -06:00

xhci-uniphier.c

ARM: UniPhier: replace <asm/io.h> with <linux/io.h>

2015-05-31 02:53:56 +09:00

xhci-zynqmp.c

usb: xhci: zynqmp: Removing unused function usb_phy_reset

2015-12-07 00:15:00 +01:00

xhci.c

dm: Rename dev_get_parentdata() to dev_get_parent_priv()

2015-10-23 09:42:28 -06:00

xhci.h

dm: usb: Support driver model in XHCI

2015-04-18 11:11:28 -06:00