Files
u-boot/board
Lokesh Vutla 97f3a178b2 board: AM335x-ICEv2: Add cpsw support
In order to enable cpsw on AM335x ICEv2 board, the following needs to be done:

1)There are few on board jumper settings which gives a choice between
cpsw and PRUSS, that needs to be properly selected[1]. Even after selecting
this, there are few GPIOs which control these muxes that needs to be held high.

2) The clock to PHY is provided by a PLL-based clock synthesizer[2] connected
via I2C. This needs to properly programmed and locked for PHY operation.
And PHY needs to be reset before before being used, which is also held by
a GPIO.

3) RMII mode needs to be selected.

[1] http://www.ti.com/lit/zip/tidr336
[2] http://www.ti.com/lit/ds/symlink/cdce913.pdf

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:52 -04:00
..
2016-03-15 15:13:04 -04:00
2016-05-02 18:37:09 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-09-11 17:12:57 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-11-12 17:38:08 +01:00
2016-04-01 17:18:10 -04:00
2016-02-06 12:00:59 +01:00
2015-09-07 13:41:04 +02:00
2016-02-06 12:00:59 +01:00
2016-02-20 21:40:02 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-05-27 15:47:52 -04:00
2016-05-02 18:37:09 -04:00
2016-02-06 12:00:59 +01:00
2016-03-26 14:16:12 +01:00
2016-01-19 08:31:21 -05:00
2016-03-27 09:13:01 -04:00