Wenyou Yang cb0cb1b0cf clk: at91: add USB Host clock driver ...

Add USB clock driver to configure the input clock and the divider
in the PMC_USB register to generate a 48MHz and a 12MHz signal to
the USB Host OHCI.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>

2018-03-16 07:30:04 -04:00

..

arm920t

Change my mailaddress

2016-05-02 18:37:09 -04:00

arm926ejs

Drop CONFIG_HAS_DATAFLASH

2017-10-16 09:42:51 -04:00

armv7

ARM: at91: Get the Chip ID of SAMA5D2 SiP

2017-09-14 16:02:45 -04:00

include/mach

clk: at91: add USB Host clock driver

2018-03-16 07:30:04 -04:00

atmel_sfr.c

ARM: at91: Remove hardware.h included in configs

2017-09-14 16:02:47 -04:00

bootparams_atmel.S

ARM: sama5d2: Implement boot device autodetection

2016-05-24 08:08:37 +02:00

clock.c

ARM: at91: clock: add PMC_PLLICPR init function

2016-02-18 21:34:41 +01:00

config.mk

…

Kconfig

board: laird: add WB50N CPU module

2017-11-29 22:36:59 -05:00

Makefile

ARM: at91: sama5: Extend boot device autodetection

2016-06-12 23:49:38 +02:00

matrix.c

ARM: at91: Remove hardware.h included in configs

2017-09-14 16:02:47 -04:00

mpddrc.c

arm: at91/spl: mpddrc: use IP version to check configuration

2016-02-02 11:49:12 +01:00

phy.c

ARM: at91: Remove hardware.h included in configs

2017-09-14 16:02:47 -04:00

sdram.c

ARM: cpu: at91: clean up peripheral clock code

2016-02-18 21:34:40 +01:00

spl_at91.c

ARM: at91: clean up the PMC_PLLICPR init code

2016-02-18 21:34:41 +01:00

spl_atmel.c

ARM: at91: spl: Adjust switching to oscillator for SAMA5D2

2017-09-14 16:02:44 -04:00

spl.c

spl: eMMC/SD: Provide one __weak spl_boot_mode() function

2018-02-07 22:06:18 -05:00