blog: nixos pinephone: mention 'dd' flags
This commit is contained in:
parent
10ab675a94
commit
5332cda66f
|
@ -11,14 +11,16 @@ step 2: convert to a flake
|
|||
|
||||
step 3: install jumpdrive to a sd card
|
||||
|
||||
step 4: build and flash a minimal mobile-nixos
|
||||
step 4: build a minimal mobile-nixos
|
||||
|
||||
step 5: flash the image. oflag=direct is less likely to result in corruption
|
||||
```sh
|
||||
$ sudo umount /dev/sdb* ; sudo dd if=/nix/store/l9na29kg38crkzhjf6ms3vviqhi2cbc5-pine64-pinephone_full-disk-image.img of=/dev/sdb bs=1M status=progress
|
||||
$ sudo umount /dev/sdb* ; sudo dd if=/nix/store/qalvicwwl80sfjx0rxmyi85wg30x257f-pine64-pinephone_full-disk-image.img of=/dev/sdb bs=1M status=progress conv=sync oflag=direct;
|
||||
```
|
||||
|
||||
step 5: add gnome and re-flash; connect to wifi (`nmcli connect wifi <wifiname> <password>`)
|
||||
validate with `sudo fsck -f /dev/sdb4`. you might see a single, inconsequential error about `Padding at end of inode bitmap is not set.`
|
||||
|
||||
step 6: ssh into the machine. resize the parts, and clone/rebuild config (better to do this from PC?)
|
||||
step 6: resize the rootfs:
|
||||
|
||||
RESIZE THE PARTITION USING CFDISK. `parted` and the like mess with the bootloader. mobile-nixos is switching from
|
||||
u-boot to towboot, so at some point this won't be problematic. you can resize the filesystem using resize2fs,
|
||||
|
@ -27,21 +29,30 @@ or just skip that and the phone will do that the next time you boot.
|
|||
```sh
|
||||
$ sudo cfdisk /dev/sdb
|
||||
scroll to /dev/sdb4
|
||||
resize
|
||||
leave at default (28.8 GB)
|
||||
write
|
||||
quite
|
||||
> Resize
|
||||
leave at default (28.8G)
|
||||
> Write
|
||||
type "yes"
|
||||
> Quite
|
||||
```
|
||||
|
||||
then disconnect the device and boot it
|
||||
step 7: poweroff, remove SD card, boot phone.
|
||||
|
||||
step 8: add gnome and re-flash; connect to wifi (`nmcli device wifi connect <wifiname>`)
|
||||
|
||||
step 9: ssh into the machine. clone/rebuild config:
|
||||
```
|
||||
$ git clone https://git.uninsane.org/colin/nix-files.git
|
||||
$ sudo rm /etc/nixos && mv nix-files /etc/nixos
|
||||
$ cd /etc/nixos
|
||||
$ sudo nixos-rebuild --flake "./#moby" switch # XXX: check /etc/fstab for compatibility first?
|
||||
~$ git clone https://git.uninsane.org/colin/nix-files.git
|
||||
~$ sudo rmdir /etc/nixos && sudo mv nix-files /etc/nixos
|
||||
~$ cd /etc/nixos
|
||||
/etc/nixos$ sudo git config --global --add safe.directory /etc/nixos
|
||||
/etc/nixos$ sudo nixos-rebuild --flake "./#moby" switch # XXX: check /etc/fstab for compatibility first?
|
||||
```
|
||||
|
||||
if everything goes right, the build shouldn't take more than 5-10 minutes.
|
||||
`sudo reboot now` and you should be right back to where you were.
|
||||
you're set!
|
||||
|
||||
# Troubleshooting
|
||||
|
||||
unbootable; unflashable (e.g. eMMC not exposed over USB)... tend to be power related issues.
|
||||
|
|
Loading…
Reference in New Issue