sync

Documentation.txt

@@ -1,5 +1,5 @@
 
-                      phpMyAdmin 2.3.0-rc3 Documentation
+                      phpMyAdmin 2.3.0-rc4 Documentation
                                        
      * Sourceforge phpMyAdmin project page   [ http://www.phpmyadmin.net/
        ]
@@ -7,8 +7,8 @@
           + Version history: ChangeLog
           + General notes: README
           + License: LICENSE
-     * Documentation version: $Id: Documentation.html,v 1.282 2002/07/14
+     * Documentation version: $Id: Documentation.html,v 1.301 2002/07/26
-       15:04:15 lem9 Exp $
+       14:50:47 lem9 Exp $
    ______________________________________________________________________
    
    Top  -  Requirements  -  Introduction  -  Installation  -
@@ -109,10 +109,12 @@ Installation
        Nevertheless be aware that MS Internet Explorer seems to be really
        buggy about cookies, at least till version 6. And php 4.1.1 is
        also a bit buggy in this area!
-     * Http and cookie authentication modes are secure: the MySQL
+     * Http and cookie authentication modes are more secure: the MySQL
        password does not need to be set in the phpMyAdmin configuration
        file. (except for the "controluser" -see the Configuration
        section-).
+       However, keep in mind that the password travels in plain text,
+       unless you are using the https protocol.
        In cookie mode, we send the password in a temporary cookie, so
        most browsers should not store the password in their cookie file.
      * For 'http' and 'cookie' modes, phpMyAdmin needs a controluser that
@@ -222,6 +224,19 @@ CRIPT_NAME'], '/')+1);
           PHP < 4.1.0. Try to replace $_SERVER by $HTTP_SERVER_VARS or
           $GLOBALS in this case.
           
+   $cfg['PmaNoRelation_DisableWarning'] boolean
+          Starting with version 2.3.0 phpMyAdmin offers a lot of features
+          to work with master / foreign - tables. These features require
+          the PMA administrator to set up a special database for PMA (see
+          $cfg['Servers'][$i]['pmadb']). Its contents and use will be
+          explained further down.
+          If you tried to set this up and it does not work for you have a
+          look on the "Structure" page of one database where you would
+          like to use it. You will find a link that will analyze why
+          those features have been disabled.
+          If you do not want to use those features set this variable to
+          TRUE to stop this message from appearing.
+          
    $cfg['Servers'] array
           Since version 1.4.2, phpMyAdmin supports the administration of
           multiple MySQL servers. Therefore, a $cfg['Servers']-array has
@@ -320,9 +335,11 @@ CRIPT_NAME'], '/')+1);
           + create a new database for phpmyadmin:
               CREATE DATABASE phpmyadmin;
             Note that "controluser" must have SELECT, INSERT and DELETE
-            privileges on the bookmark table. Here is a query to set up
+            privileges on this database. Here is a query to set up those
-            those privileges (using "pma" as the controluser):
+            privileges (using "phpmyadmin" as the database name, and
-              GRANT SELECT,INSERT,DELETE ON <pmadb> to 'pma'@localhost;
+            "pma" as the controluser):
+              GRANT SELECT,INSERT,DELETE ON phpmyadmin.* to
+            'pma'@localhost;
             do not give any other user rights on this database.
           + enter the databasename in $cfg['Servers'][$i]['pmadb']
             
@@ -750,36 +767,6 @@ CRIPT_NAME'], '/')+1);
    $cfg['RepeatCells'] integer
           Repeat the headers every X cells, or 0 to deactivate.
           
-   $cfg['UseSyntaxColoring'] boolean
-          Introduced in 2.3.0, phpMyAdmin is now able to show SQL in
-          syntax coloring.
-          To use this feature set this value to TRUE (the default). If
-          not everything you want is colored or to influence where a
-          newline is inserted see the configuration arrays
-          $cfg['keywords'] and $cfg['additional'].
-          Note: for version 2.3.0, syntax coloring is non functional.
-          
-   $cfg['colorFunctions'] string [HTML color]
-          If you use syntax coloring then this defines the color of
-          function names. e.g. all that are found in $cfg['Functions'].
-          
-   $cfg['colorKeywords'] string [HTML color]
-          If you use syntax coloring then this defines the color of
-          keywords. e.g. all that are found in $cfg['keywords'].
-          
-   $cfg['colorStrings'] string [HTML color]
-          If you use syntax coloring then this defines the color of
-          strings. e.g. all that are between ' or "
-          
-   $cfg['colorColType'] string [HTML color]
-          If you use syntax coloring then this defines the color of
-          column types. e.g. all that are found in $cfg['ColumnTypes'].
-          
-   $cfg['colorAdd'] string [HTML color]
-          If you use syntax coloring then this defines the color of
-          additional keywords that do not get a newline. e.g. all that
-          are found in $cfg['additional'].
-          
    $cfg['ColumnTypes'] array
           All possible types of a MySQL column. In most cases you don't
           need to edit this.
@@ -797,12 +784,6 @@ CRIPT_NAME'], '/')+1);
           keywords that are in this list will also get a new line before
           them.
           Usually you won't need to change those.
-          
-   $cfg['additional'] array
-          A list of additional keywords that is used for syntax coloring.
-          All keywords that are in this list will not get a new line
-          before them.
-          Usually you won't need to change those.
    ______________________________________________________________________
    
    Top  -  Requirements  -  Introduction  -  Installation  -
@@ -814,11 +795,11 @@ FAQ - Frequently Asked Questions
    Server  -  Configuration  -  Limitations  -  Multi-user  -  Browsers
    -  Usage tips  -  Project
    
-  [Server]
+  [1. Server]
   
-   I'm running php 4+ and my server is crashing each time a specific
+   [1.1] I'm running php 4+ and my server is crashing each time a
-   action is required or phpMyAdmin sends a blank page or a page full of
+   specific action is required or phpMyAdmin sends a blank page or a page
-   cryptic characters to my browser, what can I do?
+   full of cryptic characters to my browser, what can I do?
    There are some known php bugs with output buffering and compression.
    Try to set the $cfg['OBGzip'] directive to FALSE in your
    config.inc.php or .php3 file and the zlib.output_compression directive
@@ -828,42 +809,43 @@ FAQ - Frequently Asked Questions
    with MS Internet Explorer. Please upgrade to the release version php
    4.2.0.
    
-   My Apache server crashes when using phpMyAdmin.
+   [1.2] My Apache server crashes when using phpMyAdmin.
    You should first try the latest versions of Apache (and possibly
    MySQL).
    See also the other FAQ entry about php bugs with output buffering.
    If your server keeps crashing, please ask for help in the various
    Apache support groups.
    
-   I'm running phpMyAdmin with "cookie" authentication mode under PHP
+   [1.3] I'm running phpMyAdmin with "cookie" authentication mode under
-   4.2.0 or 4.2.1 loaded as an Apache 2+ module but can't enter the
+   PHP 4.2.0 or 4.2.1 loaded as an Apache 2+ module but can't enter the
    script: I'm always displayed the login screen.
    This is a kown PHP bug (see this bug report) from the official php bug
    database. It means there is and won't be any phpMyAdmin fix against it
    because there is no way to code a fix.
    
-   Using phpMyAdmin on IIS, I'm displayed the error message: "The
+   [1.4] Using phpMyAdmin on IIS, I'm displayed the error message: "The
    specified CGI application misbehaved by not returning a complete set
    of HTTP headers...."
    You just forgot to read the install.txt file from the php
    distribution. Have a look at the last message in this bug report from
    the official php bug database.
    
-   Using phpMyAdmin on IIS, I'm facing crashes and/or many error messages
+   [1.5] Using phpMyAdmin on IIS, I'm facing crashes and/or many error
-   with the http or advanced authentication mode.
+   messages with the http or advanced authentication mode.
    This is a known problem with the php ISAPI filter: it's not so stable.
    For some more information and complete testings see the messages
    posted by Andr<64> B. aka "djdeluxe76" in this thread from the phpWizard
    forum.
    Please use instead the cookie authentication mode.
    
-   I can't use phpMyAdmin on PWS: nothing is displayed!
+   [1.6] I can't use phpMyAdmin on PWS: nothing is displayed!
    This seems to be a PWS bug. Filippo Simoncini found a workaroud (at
    this time there is no better fix): remove or comment the DOCTYPE
    declarations (3 lines) from the scripts header.inc.php3, index.php3,
    left.php3 and libraries/common.lib.php3.
    
-   How can I GZip or Bzip a dump or a CSV export. It seems to not work?
+   [1.7] How can I GZip or Bzip a dump or a CSV export. It seems to not
+   work?
    These features are based on the gzencode() and bzcompress() php
    functions to be more independent of the platform (Unix/Windows, Safe
    Mode or not, and so on). So, you must have PHP4 >= 4.0.4 and
@@ -872,8 +854,8 @@ FAQ - Frequently Asked Questions
    Explorer when phpMyAdmin is run with a release candidate of php 4.2.0.
    In this case you should switch to the release version of php 4.2.0.
    
-   I cannot insert a text file in a table, and I get an error about safe
+   [1.8] I cannot insert a text file in a table, and I get an error about
-   mode being in effect.
+   safe mode being in effect.
    Your uploaded file is saved by PHP in the "upload dir", as defined in
    php.ini by the variable upload_tmp_dir (usually the system default is
    /tmp).
@@ -886,9 +868,9 @@ FAQ - Frequently Asked Questions
      * put upload_tmp_dir = /tmp/php in php.ini
      * restart Apache
        
-   I'm having troubles when uploading files. In general file uploads
+   [1.9] I'm having troubles when uploading files. In general file
-   don't work on my system and uploaded files have a Content-Type: header
+   uploads don't work on my system and uploaded files have a
-   in the first line.
+   Content-Type: header in the first line.
    It's not really phpMyAdmin related but RedHat 7.0. You have a RedHat
    7.0 and you updated your php rpm to php-4.0.4pl1-3.i386.rpm, didn't
    you?
@@ -901,16 +883,16 @@ FAQ - Frequently Asked Questions
    should go away.
    And that fixes the \r\n problem with file uploads!
    
-   I'm having troubles when uploading files with phpMyAdmin running on a
+   [1.10] I'm having troubles when uploading files with phpMyAdmin
-   secure server. My browser is Internet Explorer and I'm using the
+   running on a secure server. My browser is Internet Explorer and I'm
-   Apache server.
+   using the Apache server.
    As suggested by "Rob M" in the phpWizard forum, add this line to your
    httpd.conf:
        SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
    It seems to clear up many problems between IE and SSL.
    
-   I get an 'open_basedir restriction' while uploading a file from the
+   [1.11] I get an 'open_basedir restriction' while uploading a file from
-   query box.
+   the query box.
    Since version 2.2.4, phpMyAdmin supports servers with open_basedir
    restrictions. Assuming that the restriction allows you to open files
    in the current directory ('.'), all you have to do is create a 'tmp'
@@ -919,31 +901,33 @@ FAQ - Frequently Asked Questions
    uploaded files will be moved there, and after execution of your SQL
    commands, removed.
    
-   I have lost my MySQL root password, what can I do?
+   [1.12] I have lost my MySQL root password, what can I do?
    The MySql manual explains how to reset the permissions.
    
-   I get an error 'No SQL query' when trying to execute a bookmark.
+   [1.13] I get an error 'No SQL query' when trying to execute a
+   bookmark.
    If PHP does not have read/write access to its upload_tmp_dir, it
    cannot access the uploaded query.
    
-   I get an error 'No SQL query' when trying to submit a query from the
+   [1.14] I get an error 'No SQL query' when trying to submit a query
-   convenient text area.
+   from the convenient text area.
    Check the post_max_size directive from your php configuration file and
    try to increase it.
    
-   I have problems with mysql.user field names.
+   [1.15] I have problems with mysql.user field names.
    In older MySQL versions, the User and Password fields were named user
    and password. Please modify your field names to align with current
    standards.
    
-   I cannot upload big dump files.
+   [1.16] I cannot upload big dump files.
    The first things to check (or ask your host provider to check) are the
    values of upload_max_filesize, memory_limit and post_max_size in the
    php.ini configuration file.
    All of these three settings limit the maximum size of data that can be
-   submitted and handled by php.
+   submitted and handled by php. One user also said that post_max_size
+   and memory_limit need to be larger than upload_max_filesize.
    
-   Does phpMyAdmin support MySQL 4?
+   [1.17] Does phpMyAdmin support MySQL 4?
    MySQL 4 is not yet fully supported by phpMyAdmin.
    Because of MySQL 4's backwards compatibility you can use phpMyAdmin
    for administering MySQL 4 servers, but phpMyAdmin does not yet support
@@ -954,36 +938,46 @@ FAQ - Frequently Asked Questions
    to bugs in MySQL 4. MySQL 4 is still an alpha release and should be
    used for test purposes only!
    
-   I'm running MySQL <= 4.0.1 having lower_case_table_names set to 1. If
+   [1.18] I'm running MySQL <= 4.0.1 having lower_case_table_names set to
-   I create a new table with a capital letter in its name it is changed
+   1. If I create a new table with a capital letter in its name it is
-   to lowercase as it should. But if I try to DROP this table MySQL is
+   changed to lowercase as it should. But if I try to DROP this table
-   unable to find the corresponding file.
+   MySQL is unable to find the corresponding file.
    This is a bug of MySQL <= 4.0.1. Please upgrade to at least
    MySQL 4.0.2 or turn off your lower_case_table_names directive.
    
-   I can't run the "display relations" feature because the script seems
+   [1.19] I can't run the "display relations" feature because the script
-   not to know the font face I'm using!
+   seems not to know the font face I'm using!
    The "FPDF" library we're using for this feature requires some special
    files to use font faces.
    Please refers to the FPDF manual to build these files.
    
-  [Configuration]
+   [1.20] I receive the error "cannot load MySQL extension, please check
+   PHP Configuration".
+   To connect to a MySQL server, PHP needs a set of MySQL functions
+   called "MySQL extension". This extension may be part of the PHP server
+   (compiled-in), otherwise it needs to be loaded dynamically. Its name
+   is probably mysql.so or mysql.dll. phpMyAdmin tried to load the
+   extension but failed.
+   Usually, the problem is solved by installing a software package called
+   "PHP-MySQL" or something similar.
+   
+  [2. Configuration]
   
-   The error message "Warning: Cannot add header information - headers
+   [2.1] The error message "Warning: Cannot add header information -
-   already sent by ..." is displayed, what's the problem?
+   headers already sent by ..." is displayed, what's the problem?
    Edit your config.inc.php or .php3 file and ensure there is nothing (ie
    no blank lines, no spaces, no characters...) neither before the <?php
    tag at the beginning, neither after the ?> tag at the end.
    
-   phpMyAdmin can't connect to MySQL. What's wrong?
+   [2.2] phpMyAdmin can't connect to MySQL. What's wrong?
    Either there is an error with your PHP setup or your username/password
    is wrong. Try to make a small script which uses mysql_connect and see
    if it works. If it doesn't, it may be you haven't even compiled MySQL
    support into PHP.
    
-   The error message "Warning: MySQL Connection Failed: Can't connect to
+   [2.3] The error message "Warning: MySQL Connection Failed: Can't
-   local MySQL server through socket '/tmp/mysql.sock' (111)...") is
+   connect to local MySQL server through socket '/tmp/mysql.sock'
-   displayed. What can I do?
+   (111)...") is displayed. What can I do?
    For RedHat users, Harald Legner suggests this on the mailing list:
    On my RedHat-Box the socket of mysql is /var/lib/mysql/mysql.sock. In
    your php.ini you will find a line
@@ -1008,50 +1002,55 @@ FAQ - Frequently Asked Questions
    Have also a look at the corresponding section of the MySQL
    documentation.
    
-   Nothing is displayed by my browser when I try to run phpMyAdmin, what
+   [2.4] Nothing is displayed by my browser when I try to run phpMyAdmin,
-   can I do?
+   what can I do?
    Try to set the $cfg['OBGZip'] directive to FALSE in the phpMyAdmin
    configuration file. It helps sometime.
    Also have a look at your php version number: if it contains "4.0b..."
    it means you're running a beta version of PHP. That's not a so good
    idea, please upgrade to a plain revision.
    
-   Each time I want to insert or change a record or drop a database or a
+   [2.5] Each time I want to insert or change a record or drop a database
-   table, an error 404 (page not found) is displayed or, with http or
+   or a table, an error 404 (page not found) is displayed or, with http
-   cookie authentication, I'm asked to login again. What's wrong?
+   or cookie authentication, I'm asked to login again. What's wrong?
    Check the value you set for the $cfg['PmaAbsoluteUri'] directive in
    the phpMyAdmin configuration file.
    
-  [Known limitations]
+  [3. Known limitations]
   
-   When using http authentication, an user who logged out can not relog
+   [3.1] When using http authentication, an user who logged out can not
-   in with the same nick.
+   relog in with the same nick.
    This is related to the authentication mechanism (protocol) used by
    phpMyAdmin. We plan to change it as soon as we may find enough free
    time to do it, but you can bypass this problem: just close all the
    opened browser windows and then go back to phpMyAdmin. You should be
    able to logs in again.
    
-   When dumping a large table in compressed mode, I get a memory limit
+   [3.2] When dumping a large table in compressed mode, I get a memory
-   error or a time limit error.
+   limit error or a time limit error.
    As of version 2.2.4, we build the compressed dump in memory, so large
    tables dumps may hang. The only alternative we can think about (using
    system calls to mysqldump then gzip or bzip2) would not be applicable
    in environments where PHP is in safe mode: access to system programs
    is is limited by the system administrator, and time limit is enforced.
    
-  [ISPs, multi-user installations ]
+   [3.3] With InnoDB tables, I lose foreign key relationships when I
+   rename or alter a table.
+   This seems to be a InnoDB bug (fixed in MySQL 3.23.50?). However, keep
+   in mind that phpMyAdmin as of version 2.3.0 does not support InnoDB.
+   
+  [4. ISPs, multi-user installations ]
   
-   I'm an ISP. Can I setup one central copy of phpMyAdmin or do I need to
+   [4.1] I'm an ISP. Can I setup one central copy of phpMyAdmin or do I
-   install it for each customer?
+   need to install it for each customer?
    Since version 2.0.3, you can setup a central copy of phpMyAdmin for
    all your users. The development of this feature was kindly sponsored
    by NetCologne GmbH. This requires a properly setup MySQL user
    management and phpMyAdmin http or cookie authentication. See the
    install section on "Using http authentication".
    
-   What's the preferred way of making phpMyAdmin secure against evil
+   [4.2] What's the preferred way of making phpMyAdmin secure against
-   access?
+   evil access?
    This depends on your system.
    If you're running a server which cannot be accessed by other people,
    it's sufficient to use the directory protection bundled with your
@@ -1066,13 +1065,13 @@ FAQ - Frequently Asked Questions
      * You should use PHP safe mode, to protect from other users that try
        to include your config.inc.php3 in their scripts.
        
-   I get errors about not being able to include a file in /lang or in
+   [4.3] I get errors about not being able to include a file in /lang or
-   /libraries.
+   in /libraries.
    Check php.ini, or ask your sysadmin to check it. The include_path must
    contain "." somewhere in it, and open_basedir, if used, must contain
    "." and "./lang" to allow normal operation of phpMyAdmin.
    
-   phpMyAdmin always gives "Access denied" when using http
+   [4.4] phpMyAdmin always gives "Access denied" when using http
    authentication.
    This could happen for several reasons:
      * $cfg['Servers'][$i]['controluser'] and/or
@@ -1082,13 +1081,13 @@ FAQ - Frequently Asked Questions
        phpMyAdmin-directory, eg. a .htaccess file. This would interfere
        with phpMyAdmin's authentication, so remove it.
        
-   Is it possible to let users create their own databases?
+   [4.5] Is it possible to let users create their own databases?
    Starting with 2.2.5, in the user management page, you can enter a
    wildcard database name for a user, and put the privileges you want.
    For example, adding SELECT, INSERT, UPDATE, DELETE, CREATE, DROP,
    INDEX, ALTER would let a user create/manage his/her database(s).
    
-   How can I use the Host-based authentication additions?
+   [4.6] How can I use the Host-based authentication additions?
    If you have existing rules from an old .htaccess file, you can take
    them and add a username between the 'deny'/'allow' and 'from' strings.
    Using the username wildcard of '%' would be a major benefit here if
@@ -1108,21 +1107,22 @@ FAQ - Frequently Asked Questions
            'allow root from 172.16.0.0/12',
            );
    
-  [Browsers or client OS]
+  [5. Browsers or client OS]
   
-   I get an out of memory error, and my controls are non-functional, when
+   [5.1] I get an out of memory error, and my controls are
-   trying to create a table with more than 14 fields.
+   non-functional, when trying to create a table with more than 14
+   fields.
    We could reproduce this problem only under Win98/98SE. Testing under
    WinNT4 or Win2K, we could easily create more than 60 fields.
    A workaround is to create a smaller number of fields, then come back
    to your table properties and add the other fields.
    
-   With Xitami 2.5b4, phpMyAdmin won't process form fields.
+   [5.2] With Xitami 2.5b4, phpMyAdmin won't process form fields.
    This is not a phpMyAdmin problem but a Xitami known bug: you'll face
    it with each script/website that use forms.
    Upgrade or downgrade your Xitami server.
    
-   I have problems dumping tables with Konqueror (phpMyAdmin 2.2.2)
+   [5.3] I have problems dumping tables with Konqueror (phpMyAdmin 2.2.2)
    With Konqueror 2.1.1: plain dumps, zip and gzip dumps work ok, except
    that the proposed file name for the dump is always 'tbl_dump.php'.
    Bzip2 dumps don't seem to work.
@@ -1131,48 +1131,50 @@ FAQ - Frequently Asked Questions
    Konqueror, or else they disappear. Gzip dumps give an error message.
    Testing needs to be done for Konqueror 2.2.2.
    
-   I can't use the cookie authentication mode because Internet Explorer
+   [5.4] I can't use the cookie authentication mode because Internet
-   never stores the cookies.
+   Explorer never stores the cookies.
    MS Internet Explorer seems to be really buggy about cookies, at least
    till version 6. And thanks to Andrew Zivolup we've traced also a php
    4.1.1 bug in this area!
-   Then, If you're running php 4.1.1, try to upgrade or downgrade... it
+   Then, if you're running php 4.1.1, try to upgrade or downgrade... it
    may work!
    
-   In Internet Explorer 5.0, I get Javascript errors when browsing my
+   [5.5] In Internet Explorer 5.0, I get Javascript errors when browsing
-   rows.
+   my rows.
    Upgrade to at least Internet Explorer 5.5SP2.
    
-   In Internet Explorer 5.0, 5.5 or 6.0, I get an error when trying to
+   [5.6] In Internet Explorer 5.0, 5.5 or 6.0, I get an error when trying
-   modify a row in a table with many fields, or with a text field.
+   to modify a row in a table with many fields, or with a text field.
    Your table neither have a primary key nor an unique one, so we must
    use a long URL to identify this row. There is a limit on the lenght of
    the URL in those browsers, and this not happen in Netscape, for
    example. The workaround is to create a primary or unique key, or use
    another browser.
    
-   I refresh (reload) my browser, and come back to the welcome page.
+   [5.7] I refresh (reload) my browser, and come back to the welcome
+   page.
    Some browsers support right-clicking into the frame you want to
    refresh, just do this in the right frame.
    
-   With Mozilla 0.9.7 I have problems sending a query modified in the
+   [5.8] With Mozilla 0.9.7 I have problems sending a query modified in
-   query box.
+   the query box.
    Looks like a Mozilla bug: 0.9.6 was ok. We will keep an eye on future
    Mozilla versions.
    
-   With Mozilla 0.9.? to 1.0 and Netscape 7.0-PR1 I can't type a
+   [5.9] With Mozilla 0.9.? to 1.0 and Netscape 7.0-PR1 I can't type a
    whitespace in the SQL-Query edit area: the page scrolls down.
    This is a Mozilla bug (see bug #26882 at Bugzilla).
    
-   With Netscape 4.75 I get empty rows between each row of data in a CSV
+   [5.10] With Netscape 4.75 I get empty rows between each row of data in
-   exported file.
+   a CSV exported file.
    This is a known Netscape 4.75 bug: it adds some line feeds when
    exporting data in octet-stream mode. Since we can't detect the
    specific Netscape version, we cannot workaround this bug.
    
-  [Using phpMyAdmin]
+  [6. Using phpMyAdmin]
   
-   I can't insert new rows into a table - MySQL brings up a SQL-error.
+   [6.1] I can't insert new rows into a table - MySQL brings up a
+   SQL-error.
    Examine the SQL error with care. I've found that many programmers
    specifying a wrong field-type.
    Common errors include:
@@ -1182,21 +1184,21 @@ FAQ - Frequently Asked Questions
    Also, look at the syntax chapter in the MySQL manual to confirm that
    your syntax is correct.
    
-   When I create a table, I click the Index checkbox for 2 fields and
+   [6.2] When I create a table, I click the Index checkbox for 2 fields
-   phpMyAdmin generates only one index with those 2 fields.
+   and phpMyAdmin generates only one index with those 2 fields.
    In phpMyAdmin 2.2.0 and 2.2.1, this is the way to create a
    multi-fields index. If you want two indexes, create the first one when
    creating the table, save, then display the table properties and click
    the Index link to create the other index.
    
-   How can I insert a null value into my table?
+   [6.3] How can I insert a null value into my table?
    Since version 2.2.3, you have a checkbox for each field that can be
    null. Before 2.2.3, you had to enter "null", without the quotes, as
    the field's value.
    
-   How can I backup my database or table?
+   [6.4] How can I backup my database or table?
    Click on a database or table name in the left frame, the properties
-   will be displayed. Then go to the Dump section, you can dump the
+   will be displayed. Then on the menu, click "Export", you can dump the
    structure, the data, or both. This will generate standard SQL
    statements that can be used to recreate your database/table.
    You will need to choose "Save as file", so that phpMyAdmin can
@@ -1206,14 +1208,14 @@ FAQ - Frequently Asked Questions
    For additional help on this subject, look for the word "dump" in this
    document.
    
-   How can I restore (upload) my database or table using a dump?
+   [6.5] How can I restore (upload) my database or table using a dump?
    Click on a database name in the left frame, the properties will be
    displayed. Then in the "Run SQL query" section, type in your local
    dump filename, or use the Browse button. Then click Go.
    For additional help on this subject, look for the word "upload" in
    this document.
    
-   How can I use the relation table in Query-by-example?
+   [6.6] How can I use the relation table in Query-by-example?
    Here is an example with the tables persons, towns and countries, all
    located in the database mydb. If you don't have a PMA_relation table,
    create it as explained in the configuration section. Then create the
@@ -1257,12 +1259,12 @@ FAQ - Frequently Asked Questions
        correct joins have been generated
      * Click "Submit query"
        
-   How can I use the "display field" feature?
+   [6.7] How can I use the "display field" feature?
    Starting from the previous example, create the PMA_table_info as
    explained in the configuration section, then browse your persons
    table, and move the mouse over a town code or country code.
    
-   How can I produce a PDF schema of my database?
+   [6.8] How can I produce a PDF schema of my database?
    First you have to fill the "relation", "table_coords" and "pdf_pages"
    configuration variables.
    Then, think about your schema layout: which tables will go on which
@@ -1282,7 +1284,7 @@ FAQ - Frequently Asked Questions
        For example, x=100 and y=200 means that the table will be at 200
        mm down and 100 mm right from the upper left corner.
        Actually if you have a width of more than 300 or a height of more
-       than 100 than it will automatically be scaled but 300*100 is a
+       than 200 than it will automatically be scaled but 300*100 is a
        good start to have an idea of what coordinates to use.
      * After every table you submitted you will have the possibility to
        submit more tables
@@ -1299,27 +1301,10 @@ FAQ - Frequently Asked Questions
        extension ".pdf", under other OSes you should be fine just saving
        the file under the name it offers).
        
-   I don't like the way syntax coloring displays my query!
+   [6.9] phpMyAdmin is changing the type of one of my columns!
-   There is two things about the way how the syntax coloring works that
-   you can easily change yourself:
-     * number of newlines within your statement
-       All words that are in $cfg['keywords'] will get a newline in front
-       of them, all words in $cfg['additional'] won't. So say you don't
-       like to have a newline in front of every WHERE, you need to remove
-       it from the $cfg['keywords'] array and enter it in the
-       $cfg['additional'] array instead.
-     * colors
-       The colors are easily changed using the variables
-          + $cfg['colorFunctions']
-          + $cfg['colorKeywords']
-          + $cfg['colorStrings']
-          + $cfg['colorColType']
-          + $cfg['colorAdd']
-       
-   phpMyAdmin is changing the type of one of my columns!
    No, it's MySQL that is doing silent column type changing.
    
-   My database has an underscore in it's name, and when I grant
+   [6.10] My database has an underscore in it's name, and when I grant
    privileges to a user for this database, a backslash is added before
    the underscore. 
    This is normal and means that the grant is done only for this
@@ -1330,10 +1315,10 @@ FAQ - Frequently Asked Questions
    If you really want to grant using a wildcard, there is a dialog box "
    Database (wildcards allowed)" for this.
    
-   What is the curious symbol <20> in the table statistics?
+   [6.11] What is the curious symbol <20> in the table statistics?
    It means "average".
    
-   I want to understand some Export options.
+   [6.12] I want to understand some Export options.
    "Complete inserts" adds the column names on every INSERT command, for
    better documentation (but resulting file is bigger).
    "Extended inserts" provides a shorter dump file by using only once the
@@ -1341,19 +1326,19 @@ FAQ - Frequently Asked Questions
    "Enclose table and field names with backquotes" ensures that field and
    table names formed with special characters are protected.
    
-  [phpMyAdmin project]
+  [7. phpMyAdmin project]
   
-   I have found a bug. How do I inform developers?
+   [7.1] I have found a bug. How do I inform developers?
    Our Bug Tracker is located at
    http://sourceforge.net/projects/phpmyadmin/ under the Bugs section.
    But please first discuss your bug with other users:
    http://sourceforge.net/projects/phpmyadmin/ (and choose Forums)
    
-   I want to translate the messages to a new language or upgrade an
+   [7.2] I want to translate the messages to a new language or upgrade an
    existing language, where do I start?
    Always use the current cvs version of your language file. For a new
-   language, start from english.inc.php3. If you don't know how to get
+   language, start from english-iso-8859-1.inc.php3. If you don't know
-   the cvs version, please ask one of the developers.
+   how to get the cvs version, please ask one of the developers.
    Please note that we try not to use html entities like &eacute; in the
    translations, since we define the right character set in the file.
    With html entities, the text on buttons would not display correctly.
@@ -1363,7 +1348,7 @@ FAQ - Frequently Asked Questions
    mailing list, because this is where we ask for translations of new
    messages.
    
-   I would like to help out with the development of phpMyAdmin. How
+   [7.3] I would like to help out with the development of phpMyAdmin. How
    should I proceed?
    The following method is preferred for new developers:
      * fetch the current CVS tree over anonymous CVS:
@@ -1412,7 +1397,8 @@ Developers Information
      * Please try to keep up the file-naming conventions. Table-related
        stuff goes to tbl_*.php3, db-related code to db_*.php3 and so on.
      * Please don't use verbose strings in your code, instead add the
-       string (at least) to english.inc.php3 and print() it out.
+       string (at least) to english-iso-8859-1.inc.php3 and print() it
+       out.
      * If you want to be really helpful, write an entry for the
        ChangeLog.
        
@@ -1517,6 +1503,7 @@ CREDITS, in chronological order
 
 Thanks to these guys who have sent us some major improvements to merge into the
 code since version 2.1.0:
+
 - Michal Cihar <nijel at users.sourceforge.net> who implemented the
   enhanced index creation/display feature, and the mecanism to display
   a character set in MySQL different than the one in HTML.
@@ -1538,15 +1525,16 @@ code since version 2.1.0:
 
 And also to the following people who have contributed minor changes,
 enhancements, bugfixes or support for a new language since version 2.1.0:
+
 Bora Alioglu, Ricardo ?, Sven-Erik Andersen, Alessandro Astarita,
 P<EFBFBD>ter Bakondy, Borges Botelho, Olivier Bussier, Neil Darlow, Laurent Dhima,
 Kristof Hamann, Thomas Kl<4B>ger, Lubos Klokner, Martin Marconcini,
 Girish Nair, David Nordenberg, Bernard M. Piller, Laurent Haas,
 "Sakamoto", Yuval Sarna, www.securereality.com.au,
 Alvar Soome, Siu Sun, Peter Svec, Michael Tacelosky, Rachim Tamsjadi,
-Lu<EFBFBD>s V., Martijn W. van der Lee, Algis Vainauskas, Daniel Villanueva, Vinay,
+Kositer Uros, Lu<EFBFBD>s V., Martijn W. van der Lee, Algis Vainauskas,
-Ignacio Vazquez-Abrams, Chee Wai, Jakub Wilk, Thomas Michael Winningham,
+Daniel Villanueva, Vinay, Ignacio Vazquez-Abrams, Chee Wai, Jakub Wilk,
-Vilius Zigmantas.
+Thomas Michael Winningham, Vilius Zigmantas.
 
 
 Original Credits of Version 2.1.0