Otherwise we can accidentally use something that we ought not. Also,
there's deprecation warnings for stuff that's not deprecated in the
version we support yet:
mm-modem-simple.c: In function 'mm_modem_simple_connect_finish':
mm-modem-simple.c:117:5: warning: 'g_simple_async_result_propagate_error' is deprecated [-Wdeprecated-declarations]
if (g_simple_async_result_propagate_error (G_SIMPLE_ASYNC_RESULT (res), error))
^~
GE910 is a 2g only modem and when queried for bands it returns
only a 2g set of bands:
--> 'AT#BND=?<CR>'
<-- '<CR><LF>#BND: (0-3)<CR><LF><CR><LF>OK<CR><LF>'
Current regex fails, since it considers the 3g bands block mandatory.
A similar problem happens for current bands.
This patch modifies the regular expressions for properly
supporting GE910 and updates tests.
GE910 family supports #PORTCFG layouts different than HE910
family ones.
This patch properly tags GE910 ports according to Telit document
"GE910 Family Ports Arrangements, 1vv0301049"
<debug> (ttyUSB2): --> 'AT^SYSCFG?<CR>'
<debug> (ttyUSB2): <-- '<CR><LF>^SYSCFG:14,2,400380,1,2<CR><LF><CR><LF>OK<CR><LF>'
<warn> couldn't load current allowed/preferred modes: 'No SYSCFG combination found matching the current one (14,2)'
14,2 means "WCDMA-only; acquire WCDMA then GSM" which is somewhat
non-sensical. The supported modes parsing doesn't generate this
combination because it doesn't really make sense, so current mode
matching failed. Just fix up the non-sensical acquisition order
to 0 (automatic).
We need at least ID_USB_INTERFACE_NUM, as some plugins (Huawei, Telit, Option)
require this property when gathering port type hints.
We also add support for other properties (ID_VENDOR_ID, ID_MODEL_ID...) as we
already have those values preloaded.
Instead of relying on the udev daemon and GUDev to manage the devices reported
by the kernel, we can now run ModemManager relying solely on the kernel events
reported via the new ReportKernelEvent() API. Therefore, the '--no-auto-scan'
option is implicit for the ModemManager daemon when udev is disabled in the
build.
Additionally, a new custom implementation of the kernel device object is
provided, which uses sysfs to load the properties and attributes required in
each kernel device, instead of using a GUdevDevice.
The udev rule files are kept in place, and a simple custom parser is provided
which preloads all rules in memory once and then applies them to the different
kernel objects reported via ReportKernelEvent(), e.g. to set port type hints.
A simple unit test setup is prepared to validate the udev rules during the
`check' Makefile target.
The mm_base_modem_grab_port() now receives a MMKernelDevice directly from the
plugin, which is then stored in the MMPort corresponding to the port.
This means that we have direct access to e.g. all properties set by udev rules
everywhere, and we don't need additional GUdevClient objects (e.g. like the one
used in the Huawei plugin to detect NDISDUP support during runtime).
For virtual ports (e.g. generated during unit tests), we have a new 'generic'
kernel device object which just provides the values from the kernel device
properties given during its creation.
This commit enables a new core ModemManager daemon option, so that automatic
detection of available modems is totally disabled: '--no-auto-scan'. Note that
this option also replaces the previously used '--test-no-auto-scan' option,
which was only used during tests.
Along with the new ModemManager option, a new ReportKernelEvent() method in
the API is defined, which allows notifying the daemon of which interfaces it
should be accessing, as well as the main details of each interface. The only
mandatory parameters in the new method are 'action' (add/remove), 'name' (the
name of the interface) and 'subsystem' (the subsystem of the interface).
The mmcli tool has support for using the new api method via several new options:
* The '--report-kernel-event' option allows specifying device ports one by
one, and is a direct mapping of the ReportKernelEvent() method:
$ sudo mmcli --report-kernel-event="action=add,name=wwan0,subsystem=net"
$ sudo mmcli --report-kernel-event="action=add,name=cdc-wdm0,subsystem=usbmisc"
* The '--report-kernel-event-auto-scan' option uses udev monitoring to notify
events automatically to the daemon. This allows to operate in a way
equivalent to the default daemon operation (with implicit auto-scan).
Worth noting that the ReportKernelEvent() method is only usable when
'--no-auto-scan' is explicitly used in the daemon. An error will be reported if
the method is tried while standard udev monitoring is enabled (implicit if
auto scan isn't explicitly disabled in the daemon).
If mmcli is going to be used only to report 'real time' events, an optional
'--initial-kernel-events=[PATH]' may be given in the ModemManager call to
automatically process a set of port kernel events one by one on boot. The file
may e.g. contain:
action=add,name=wwan0,subsystem=net
action=add,name=cdc-wdm0,subsystem=usbmisc
Instead of relying constantly on GUdevDevice objects reported by GUdev, we now
use a new generic object (MMKernelDevice) for which we provide an initial GUdev
based backend.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
This patch adds another Infineon flashloader device 0x8087/0x0801
to the blacklist
Reference to the kernel commit:
github.com/torvalds/linux/commit/f190fd92458da3e869b4e2c6289e2c617490ae53
Commit a66871a287 introduced an additional
ATTRS{idVendor} match condition in the same rules matching by interface class,
subclass and protocol. We shouldn't be doing that because we cannot mix parent
attribute matchings from different parents.
Commit 7ff57f9808 introduced a change to try to
use ATTRS{bInterfaceNumber} as a common way to match by interface number, but
this logic is broken because all the rules that we use to match by interface
number (attribute in the interface device) also require matching by idVendor
and idProduct (attributes in the physdev device), and udev rules forbid matches
from more than one parent device at a time.
We could use ATTR{bInterfaceNumber} (instead of ATTRS) to tag the actual USB
interface device, but that would require a change in all the plugins to look for
the tag not in the TTY device, but in its parent.
So, recover the original behavior, where a hidden property is created containing
the first bInterfaceNumber found in the list of parent devices, and then run
the matches against idVendor and idProduct only if the hidden property is found
with the expected value.
Rules with a single condition where a parent property is checked with != don't
work properly. E.g.:
SUBSYSTEMS!="usb", GOTO="end"
or:
ATTRS{idVendor}!="abcd", GOTO="end"
Instead, we can mix both those previous parent rules and match them:
SUBSYSTEMS=="usb",ATTRS{idVendor}=="abcd", GOTO="next"
GOTO="end"
LABEL="next"
# Apply rules here
LABEL="end"
In this case both SUBSYSTEMS and ATTRS conditions apply to the parent usb_device
(idVendor attribute is only available in the usb_device), so they apply to all
ports of the same device.
Implement the detailed signal info interface for some Huawei 3GPP modems
including those based on HiSilicon chipsets like the E3276. Known not to
work on many Qualcomm-based Huawei modems like E392, E397, and E367 as
they don't support the ^HCSQ command, but they do support QMI and so
have access to the extended signal interface via QMI.
MMBroadbandModemTelit:
* added logic to set MMBroadbandModem's SIM_HOT_SWAP property to TRUE
* added function to enable QSS unsolicited
* added QSS unsolicited handler
BaseModem
added reprobe property.
MMDevice
added logic to recreate the modem if it is set invalid and "to reprobe"
MMBroadbandModem
* added initialization step for SIM hot swap:
1. keep dedicated ports open to listen to modem's unsolicited
2. dedicated error management in case of initialization failure due to SIM missing
* added function to be called in order to act upon SIM insertion/removal:
1. close dedicated ports
2. set the modem to be reprobed
3. disable modem
* added SIM HOT SWAP boolean property
MMIfaceModem
* added initialization step for SIM hot swap, if supported by the plugin
* dedicated error management in case of initialization failure due to SIM missing
We may want to use the mm_get_()_from_match_info() calls to read optional items,
so that the method returns FALSE if the item index doesn't apply. So, avoid the
implicit warning issued by g_return_val_if_fail().
The rules were matched only against devices with an exact 'tty' subsystem, and
that means that we were not properly adding additional tags on e.g. wwan or
cdc-wdm devices.
