The +AUTOCSQ setup enables automatic signal quality reporting via +CSQ
URCs, which unfortunately have the same format as the +CSQ command
responses.
Therefore, we need to subclass load_signal_quality() explicitly in
order to ignore those cases where the response to the +CSQ command is
received empty (already processed as a URC).
If we're loading signal quality or access technology, skip reporting
any error message if the specific error received is 'in-progress'.
Plugins will use this error when they cannot process the response to
the operation, e.g. if it was already consumed by a URC handler.
The logic to setup the generic +CIND indications in the SIM7600E seems
to end up breaking connectivity when in TTY+PPP mode. If we issue the
AT+CMER=3,0,0,1 command, this will end up in the modem not replying a
correct CONNECT response to the ATD command.
Let's disable these +CIND indications completely in the simtech
plugin, as there is even no AT command reference saying those are
supported.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/144
We have deprecated the use of MM_CORE_ERROR_CANCELLED inside the
daemon in favor of using G_IO_ERROR_CANCELLED right away, and so, we
will now register G_IO_ERROR_CANCELLED as the error mapped to the
"Cancelled" error in the ModemManager error domain in DBus.
We therefore avoid sending unknown/unmapped errors via DBus, as in
this case:
$ sudo ./test.sh
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
error: couldn't connect the modem: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Cancelled: Connection attempt cancelled'
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
error: couldn't connect the modem: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Cancelled: Connection attempt cancelled'
successfully disconnected all bearers in the modem
error: couldn't connect the modem: 'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code19: Operation was cancelled'
successfully disconnected all bearers in the modem
The Simple.Disconnect() method handler was totally broken when a
specific bearer path was given, because the user-provided bearer path
was never being stored in the DisconnectionContext struct...
This is an extremely bad error, but it also gives us an indication
that no one is really using this method to disconnect one single
bearer, mainly because we also have the Bearer.Disconnect() method,
which makes more sense. mmcli didn't even allow passing a bearer path
to --simple-disconnect.
