It is no longer true that all QMI ports are exposed by the qmi_wwan
driver and that all MBIM ports are exposed by the cdc_mbim driver.
There are other generic setups that allow exposing these types of
ports using different drivers, and usually we can also know the type
of port in advance via other means. Therefore, allow adding udev port
type hints for QMI and MBIM ports as well.
This is not just a rename of the rule, we also now avoid doing an
explicit check on the port name as well, and we rely on subsystem
checks only; i.e. the same logic applied for net ports.
The port candidate rules already do a 'cdc-wdm*' device name check
so it shouldn't be a big deal.
This tag is completely redundant because users can whitelist the
platform TTY ports to use with the more generic ID_MM_DEVICE_PROCESS
tag, which is part of the explicit whitelist filter rule.
The udev tag that allows flagging devices that MAY be modems
(e.g. USB<->RS232 adapters) is only applicable to TTY devices, so
explicitly specify that in the tag name as well.
Until now the ID_MM_DEVICE_IGNORE udev tag was being used in the
internal blacklist of devices shipped by ModemManager when running in
either DEFAULT or PARANOID filter modes. The name of the tag is
extremely misleading because it doesn't really make the full device be
ignored, the tag only applied to TTY ports.
This commit repurposes the tag so that it applies to ANY kind of
port (e.g. TTY, NET, cdc-wdm...) and also to any kind of filter type
(i.e. also applicable in STRICT mode).
The internal blacklist shipped by ModemManager, which should NOT be
used in STRICT mode, uses a new tag name, ID_MM_TTY_BLACKLIST.
The new ID_MM_DEVICE_IGNORE tag is therefore much more usable and its
name is really meaningful. If there are users or third-party projects
adding their own udev rules with the ID_MM_DEVICE_IGNORE tag name,
they should have no problem as the new rule is more restrictive than
the old one.
Until now we have only allowed to use and setup 'default bearers' (in
4G) or 'primary contexts' (in 2G/3G).
We can define a couple of additional bearer types, though:
* The 'dedicated bearers' (in 4G) or 'secondary contexts' (in 2G/3G),
which are associated to a specific default/primary one, but which
provide specific QoS settings configured via traffic flow templates.
* The 'initial default EPS bearer', which is a special case of default
bearer in LTE, which is automatically created and connected when the
modem is registered in the LTE network.
This commit introduces a new 'MMBearerType' enumeration that will be
associated to each bearer through a 'BearerType' property in the
org.freedesktop.ModemManager1.Bearer interface, showing what kind of
bearer/context this is.
By default, right now, all bearer objects created are 'default'
bearers.
This prevents errors due to nasty typos in the strings.
We define all symbols in a single header file that is NOT considered
part of the API, as there is no need for MM clients to know about
these tags code-wise. These tags are only meaningful when associated
to devices in udev.
Information of each tag is included in the general API documentation.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/88
Sometimes SUPL-server based A-GPS is not possible, e.g. if the module
doesn't have Internet connectivity. In such cases, the modem may
support injecting additional "assistance data" that may be downloaded
from the Internet using external means (e.g. WiFi), in order to keep
having a quick time to first fix.
We now support using this location assistance data, with the following
new API elements:
* A new mask of supported assistance data types is provided in the
SupportedAssistanceData property.
* A new list of URLs from where the aassistance data may be
downloaded is also provided in a new AssistanceDataServers
property.
* A new InjectAssistanceData() method is provided, to perform the
data injection in the module once it's been downloaded to the host
system.
The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
When this symbol is defined, e.g. via CFLAGS, building a program that
uses the ModemManager API will fail if the program references
deprecated symbols.
For now we just use it to keep gtk-doc-scan happy and avoid
unnecessary warnings.
Using an intermediate constant variable breaks compilation with C
compilers, as these variables cannot be used as initializers.
Instead, define a deprecated type and cast all deprecated symbols to
that type. We lose the information about what the new replacement
symbol is, but we don't break compilation.
E.g.:
test.c: In function ‘main’:
test.c:8:5: warning: ‘MMModemBandDeprecated’ is deprecated [-Wdeprecated-declarations]
printf ("band: %d\n", MM_MODEM_BAND_U2100);
^~~~~~
Those Roman numeral suffixes in MM_MODEM_BAND_EUTRAN_* were replaced
with 1, 2, 3, ..., etc. This patch adds a compatibility header,
ModemManager-compat.h, to alias the old MM_MODEM_BAND_EUTRAN_* values to
the new values.
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
These diagrams are not expected to change much, so just include the generated
PNGs in the repository, and remove 'dia' from the prerequisites to build the
documentation.
