Dan Williams
27ffa6b272
core: authenticate SMS operations
2010-02-27 07:19:37 -08:00
Dan Williams
bffb332481
core: install correct dbus permissions for with-polkit/without-polkit
2010-02-27 06:25:45 -08:00
Dan Williams
438a047935
core: add authorization providers and optional PolicyKit support
...
When the support is complete, use --with-polkit to enable
PolicyKit support. It's not there yet, but this commit adds an
authorization provider framework which will be extended to allow
hooking into PolicyKit.
2010-02-26 18:01:55 -08:00
Dan Williams
7a0373afee
qcdm: add serial port subclass skeleton
2010-02-23 11:41:40 -08:00
Dan Williams
bc3ac7bae5
qcdm: testcase output cleanup
2010-02-22 21:43:42 -08:00
Dan Williams
d694cebdfe
qcdm: add more HDR subsystem protocol enums
...
Found in TIA-856-A section 9. Assuming that the modem firmware just
passes the protocol states right through.
2010-02-22 19:00:31 -08:00
Dan Williams
06415201cb
qcdm: add HDR State Info command
2010-02-22 18:34:12 -08:00
Dan Williams
928f8a9ff2
qcdm: add Call Manager subsystem STATE_INFO command
2010-02-22 17:35:28 -08:00
Dan Williams
bf01571622
qcdm: add enums for STATUS rx_state values
2010-02-22 16:45:50 -08:00
Dan Williams
c937d1399b
qcdm: add SW_VERSION command
2010-02-22 16:15:19 -08:00
Dan Williams
b50638dcbe
qcdm: fix up DIAG_CMD_STATUS structure
...
There's some junk in between the fields, apparently.
2010-02-22 15:53:19 -08:00
Dan Williams
bdfddd57e7
qcdm: fix STATUS command SID & NID reporting
2010-02-22 15:53:06 -08:00
Dan Williams
98ec1bdfea
qcdm: add testcases for QCDMResult objects
2010-02-22 15:23:34 -08:00
Dan Williams
c0e227a16b
qcdm: add status command and rework testcases a bit
...
Status command not completely working yet.
2010-02-22 13:27:25 -08:00
Dan Williams
cb59d2e64d
qcdm: fix guint8 result member retrieval
2010-02-22 13:08:19 -08:00
Dan Williams
3d617b7bf6
qcdm: add command to get MDN (ie, phone number)
2010-02-22 12:17:27 -08:00
Dan Williams
7d151e6ae0
qcdm: add DIAG_CMD_ESN
2010-02-22 11:33:44 -08:00
Dan Williams
4c297935ef
qcdm: fix unref-ing result objects
2010-02-22 11:21:48 -08:00
Dan Williams
10e5e6561f
qcdm: handle more command error responses
2010-02-22 11:06:50 -08:00
Dan Williams
0f9d4d2a1a
qcdm: fix QCDM packet decapsulation
...
Rename and document the encapsulate/decapsulate functions, CRC-check
the incoming packet, and make callers aware of the difference in how
big the decapsulated packet is versus how many bytes they should
discard from the buffer (since the decapsulated packet is at least
3 bytes shorter than the incoming packet due to the CRC + framing).
2010-02-22 10:52:59 -08:00
Dan Williams
f5d1a9b400
serial: allow file descriptor configuration to be handled by subclasses
2010-02-21 11:22:16 -08:00
Dan Williams
2cdefeb6da
Merge remote branch 'origin/master' into qcdm
2010-02-20 14:58:04 -08:00
Dan Williams
b9958e6ec5
policy: add missing Makefile.am and icon
2010-02-20 14:56:37 -08:00
Dan Williams
a8c7bba19e
serial: refactor MMSerialPort into a base class and an AT-capable serial port
...
For QCDM devices we want most of what MMSerialPort does, but not
the AT command handling stuff since the commands and responses
aren't AT commands nor are they even strings. So convert everything
that MMSerialPort does into a GByteArray, and let MMAtSerialPort
handle the conversion to strings when necessary.
2010-02-20 14:55:10 -08:00
Dan Williams
a431455059
core: fix memory leak on startup
2010-02-20 14:53:43 -08:00
Dan Williams
9d8e892ffe
Merge remote branch 'origin/master' into qcdm
2010-02-20 12:49:22 -08:00
Dan Williams
9185ce987d
po: add translatable
2010-02-19 18:23:19 -08:00
Dan Williams
16b2f40f1c
policy: add basic PolicyKit authorizations
2010-02-19 18:21:07 -08:00
Dan Williams
dcedb5273c
mbm: add new C3607w device ID
2010-02-19 11:34:47 -08:00
Dan Williams
9c958c99bc
build: add intltool support for PolicyKit policy translations
2010-02-16 11:03:16 -08:00
Dan Williams
c916ea7b4b
qcdm: whitespace fixes
2010-02-16 10:04:26 -08:00
Dan Williams
6239d2e351
qcdm: implement command handling and minimal infrastructure
2010-02-16 09:58:47 -08:00
Dan Williams
1a7be4a379
huawei: ignore CSS on EVDO-capable modems (rh #553199 )
...
Since CSS doesn't reliably determine EVDO-only registration state.
2010-02-11 08:12:41 -08:00
Dan Williams
d8ea5ea003
gsm: fix initial PIN checking for devices that echo by default
...
If the modem echoed commands by default (since we may not have
initialized the modem yet), the echoed command would confuse
the PIN check reply parser.
2010-02-09 23:44:23 -08:00
Dan Williams
95dd4b5be1
gsm: try initial PIN check a few times in case SIM is busy
2010-02-09 22:58:44 -08:00
Dan Williams
953095466d
sierra: ignore +PACSP0 on GSM devices
2010-02-09 22:14:06 -08:00
Dan Williams
33c63a6681
zte: quite ZUSIMR messages for PIN-enabled devices too
...
Normally this would get done by the prober, but if the device
has a PIN enabled it'll reject almost all commands so the +CPMS?
in the prober will fail. Thus we have to do it after we've unlocked
the device.
2010-02-08 12:37:06 -08:00
Dan Williams
7fdacfc89b
test: add SE K600i COPS response testcase
2010-02-08 11:45:50 -08:00
Dan Williams
626f2953bf
qcdm: fix licensing of testcases
2010-02-08 09:25:58 -08:00
Dan Williams
704d6e90b6
qcdm: add DM protocol utilities and testcases
...
Bits for CRC calculation and frame escaping/unescaping.
2010-02-08 09:13:17 -08:00
Dan Williams
9eb376d782
longcheer: add more port tags
2010-02-03 18:37:24 -08:00
Dan Williams
8e3406bf74
longcheer: tag ChinaBird PL68 (pid 0x9000) ports (bgo #608668 )
2010-02-03 15:19:36 -08:00
Martin Pitt
a9918d5942
core: ignore VTs
...
Even just walking sysfs for driver and parent devices takes
time for ports we know we'll never use, so take a short-cut
and save some startup time. This reduces the startup
overhead to some 15%.
2010-02-02 10:02:53 -08:00
Dan Williams
469e54c364
gsm: update UnlockRequired status on PIN/PUK entry result
2010-01-31 22:33:38 -08:00
Dan Williams
c85e617530
serial: handle string CME error codes too
...
Some devices won't get to the initialization stage where we send
CMEE=1 (for numeric error codes) before they return some errors,
so handle the string representation of CME error codes too.
2010-01-31 22:32:33 -08:00
Dan Williams
27d1c8f936
errors: rework error conversion
...
Use the same error structure for parsing numeric and string-based errors.
2010-01-31 21:52:29 -08:00
Dan Williams
ba9634ae4f
serial: add mm_serial_port_is_open()
2010-01-31 12:04:53 -08:00
Dan Williams
7659208037
core: log when unlock state changes
2010-01-31 12:00:26 -08:00
Dan Williams
42a20ab187
core: whitespace fixup
2010-01-31 11:57:05 -08:00
Norbert Frese
1561436788
core: check modem PIN state before exporting it (bgo #604551 )
...
And set UnlockRequired accordingly. Large cleanups and rework by
dcbw.
2010-01-31 11:43:52 -08:00
