|
|
|
|
@@ -159,6 +159,10 @@
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_GSM_SIM_ID N_("The SIM card unique identifier (as given by the WWAN management service) which this connection applies to. If given, the connection will apply to any device also allowed by \"device-id\" which contains a SIM card matching the given identifier.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_GSM_SIM_OPERATOR_ID N_("A MCC/MNC string like \"310260\" or \"21601\" identifying the specific mobile network operator which this connection applies to. If given, the connection will apply to any device also allowed by \"device-id\" and \"sim-id\" which contains a SIM card provisioned by the given operator.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_GSM_USERNAME N_("The username used to authenticate with the network, if required. Many providers do not require a username, or accept any username. But if a username is required, it is specified here.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_MULTICAST_SPEC N_("The last byte of supervision address.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PORT1 N_("The port1 interface name of the HSR. This property is mandatory.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PORT2 N_("The port2 interface name of the HSR. This property is mandatory.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PRP N_("The protocol used by the interface, whether it is PRP or HSR.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MAC_ADDRESS N_("If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_INFINIBAND_P_KEY N_("The InfiniBand p-key to use for this device. A value of -1 means to use the default p-key (aka \"the p-key at index 0\"). Otherwise, it is a 16-bit unsigned integer, whose high bit 0x8000 is set if it is a \"full membership\" p-key. The values 0 and 0x8000 are not allowed. With the p-key set, the interface name is always \"$parent.$p_key\". Setting \"connection.interface-name\" to another name is not supported. Note that kernel will internally always set the full membership bit, although the interface name does not reflect that. Usually the user would want to configure a full membership p-key with 0x8000 flag set.")
|
|
|
|
|
@@ -464,10 +468,6 @@
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HOSTNAME_FROM_DNS_LOOKUP N_("Whether the system hostname can be determined from reverse DNS lookup of addresses on this device. When set to \"default\" (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be \"true\" (1).")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HOSTNAME_ONLY_FROM_DEFAULT N_("If set to \"true\" (1), NetworkManager attempts to get the hostname via DHCPv4/DHCPv6 or reverse DNS lookup on this device only when the device has the default route for the given address family (IPv4/IPv6). If set to \"false\" (0), the hostname can be set from this device even if it doesn't have the default route. When set to \"default\" (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be \"false\" (0).")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HOSTNAME_PRIORITY N_("The relative priority of this connection to determine the system hostname. A lower numerical value is better (higher priority). A connection with higher priority is considered before connections with lower priority. If the value is zero, it can be overridden by a global value from NetworkManager configuration. If the property doesn't have a value in the global configuration, the value is assumed to be 100. Negative values have the special effect of excluding other connections with a greater numerical priority value; so in presence of at least one negative priority, only connections with the lowest priority value will be used to determine the hostname.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_MULTICAST_SPEC N_("The last byte of supervision address.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PORT1 N_("The port1 interface name of the HSR. This property is mandatory.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PORT2 N_("The port2 interface name of the HSR. This property is mandatory.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_HSR_PRP N_("The protocol used by the interface, whether it is PRP or HSR.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_LINK_GRO_MAX_SIZE N_("The maximum size of a packet built by the Generic Receive Offload stack for this device. The value must be between 0 and 4294967295. When set to -1, the existing value is preserved.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_LINK_GSO_MAX_SEGMENTS N_("The maximum segments of a Generic Segment Offload packet the device should accept. The value must be between 0 and 4294967295. When set to -1, the existing value is preserved.")
|
|
|
|
|
#define DESCRIBE_DOC_NM_SETTING_LINK_GSO_MAX_SIZE N_("The maximum size of a Generic Segment Offload packet the device should accept. The value must be between 0 and 4294967295. When set to -1, the existing value is preserved.")
|
|
|
|
|
|
Fernando Fernandez Mancera