If we're activating the device without knowing the connection in advance, defer
servicing the requests for the secrets until we set the path.
[lkundrak@fedora20-2 ~]$ nmcli --ask c ifname wlan0
(process:18405): libnm-CRITICAL **: nm_object_get_path: assertion 'NM_IS_OBJECT (object)' failed
Error: Connection activation failed: The device has no connections available.
[lkundrak@fedora20-2 ~]$
We've previously been just watching for state changes into UNMANAGED state. No
state change is emitted upon removal of a device which is already unmanaged.
https://bugzilla.gnome.org/show_bug.cgi?id=737659
Before, we would only track a device in NMDefaultRouteManager
if it had a default route. Otherwise the entry for the device
was removed.
That was wrong, because having no entry meant that the interface
is assumed and hence we would not touch the interface. Instead we must
esplicitly track devices without default route to know when an interface
has no default route.
Signed-off-by: Thomas Haller <thaller@redhat.com>
It's better to add the more important routes first. Otherwise there
might be a short time when a lower priority route has precedence.
Signed-off-by: Thomas Haller <thaller@redhat.com>
The previous commit made NM enforce the default route on interfaces for
which NM manages a default route.
For interfaces that are configured never-default, NM will now pick up
any externally configured default route, as if it was managed by NM.
This is important, because NMDefaultRouteManager needs a notion of which
is the best device. Without this change, it was agnostic to default routes
on managed, never-default interfaces.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Monitor default routes from platform, and resync the default routes
on changes.
For one, this fixes the following use-case: have an assumed device em1
with two routes of metric 20 and 21. Activate em2, which will get effective
metric 22.
When externally removing route em1/20, em2 would resync the effective metric to
20. This is correct and already worked before. However, when deleting em1/21,
nothing happened. With this change, em2 would resync to metric 21 to fill the gap.
However this commit has much bigger effects: whenever the user externally adds
a default route to an interface for which NM manages an default route, NM will
delete it.
Also, when deleting the default route (managed by NM), NM would readd
it. Effectivly, the user can no longer mess with the default route on
interfaces for which it manages the default route.
If the connection is configured never-default, the user still can add
default routes and NM will not touch them.
Obviously, this has no effect for assumed devices either and the user
can externally add and remove default routes as he wishes.
https://bugzilla.gnome.org/show_bug.cgi?id=735512
Signed-off-by: Thomas Haller <thaller@redhat.com>
Don't only consider the best route of assumed devices when syncing the route
metrics. This fixes the following scenario:
Have em1 assumed, with two default routes (metric 20 and 21).
When activating em2, NMDefaultRouteManager would have determined
21 as the effective metric, thus replacing the assumed route of em1.
Since we don't want to touch assumed interfaces, it is wrong to
replace their default routes.
Instead, keep track of all the assumed default routes and consider their
metrics when choosing effective_metric.
Signed-off-by: Thomas Haller <thaller@redhat.com>
When calling update_default_route(), NMDefaultRouteManager will look at the
source, and determine whether it has a default route or not. For example
for device sources, this means calling nm_device_get_ip4_default_route().
If the source indicates that it has no default route, the effect of
calling update_default_route() is the same as calling
remove_default_route() (hence, remove() can be replaced by update()).
If the source however still indicates a default route, the behavior
would be different. This case would be an undesired inconsistancy,
because source and NMDefaultRouteManager would disagree of whether
the source has a default route.
Source must always properly indicate whether it has a default route
or not, hence this situation does not arise.
Hence it is always better to call update().
Signed-off-by: Thomas Haller <thaller@redhat.com>
The case of having a metric MAXUINT32 is special, because in face of
multiple default routes with the same metric, NMDefaultRouteManager
cannot reduce the effective metric (because there is no lower priority
value).
This case works already correct, just when adding such a default route,
ensure that we add it to the *first* entry.
Signed-off-by: Thomas Haller <thaller@redhat.com>
NetworkManager[31624]: <warn> VPN service 'openvpn': could not launch the VPN service. error: (8) Failed to execute child process "/usr/local/libexec/nm-openvpn-service" (No such file or directory).
**
NetworkManager:ERROR:nm-manager.c:3094:_activation_auth_done: assertion failed: (error)
An sd_dhcp_lease will always have an associated address, netmask, and
lifetime, so we don't have to check for errors when fetching them.
(The systemd code will fill in a default netmask if the server didn't
provide one; nm-dhcp-systemd's code to do that itself was redundant
and unused.)
Also, log the expiration time and NTP servers, for consistency with
everything else.
If asked to read a file that doesn't exist, sd_dhcp_lease_load()
returns 0 (success) without setting the out lease argument. So we need
to check both the return status and the lease before proceeding.
The signals might be delivered in no particular order and we need to wait for
the device to reach stable state (whether it's successfully conntected or not)
as well as the active connection to leave ACTIVATING state.
https://bugzilla.gnome.org/show_bug.cgi?id=740320
Fixes testing on 32-bit arches:
/core/general/test_setting_compare_timestamp:
(./test-general:29331): GLib-GObject-WARNING **: g_object_set_valist: object class `NMSettingConnection' has no property named `$?\xff\xff\x89t$0\x89|$4\xe8\u001c\x98\xff\xff\x85\xc0tM\x83\xf8\xfft3\x8dT$(\xc7D$\u0008'
/bin/sh: line 5: 29331 Trace/breakpoint trap ${dir}$tst
FAIL: test-general
Fixes: 093a3c88d0
We were refreshing the list when the set of available devices changed,
or the set of active connections changed, but not when the set of
available connections changed.
https://bugzilla.gnome.org/show_bug.cgi?id=740333
