arm64: dts: rockchip: Add Xunlong Orange Pi 3B
The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: d79d713d602e8b32cf935ddfdf61769cb74ba1dc ] (cherry picked from commit 9defe71f2674f82c27a8d4593d8c5851ab5d51e7) Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman
committed by
Kever Yang
Kever Yang
parent
5d199ad9a6
commit
60dc9c8947
29
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts
Normal file
29
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts
Normal file
@@ -0,0 +1,29 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-orangepi-3b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 3B v1.1";
|
||||
compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
70
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts
Normal file
70
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts
Normal file
@@ -0,0 +1,70 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-orangepi-3b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 3B v2.1";
|
||||
compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566";
|
||||
|
||||
vccio_phy1: regulator-1v8-vccio-phy {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_phy1";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
vccio5-supply = <&vccio_phy1>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wakeup";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>;
|
||||
vbat-supply = <&vcc_3v3>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
678
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi
Normal file
678
dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi
Normal file
@@ -0,0 +1,678 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 3B";
|
||||
compatible = "xunlong,orangepi-3b", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led>;
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-3v3-vcc-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_pwren>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-3v3-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren_h>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg_pwren_h>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_reg_on_h>;
|
||||
post-power-on-delay-ms = <200>;
|
||||
power-off-delay-us = <5000000>;
|
||||
reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
clock_in_out = "input";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_rgmii_bus
|
||||
&gmac1m0_clkinout>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
clock-names = "mclk";
|
||||
clock-output-names = "rk809-clkout1", "rk809-clkout2";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
||||
#sound-dai-cells = <0>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <830000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx
|
||||
&i2s1m0_lrcktx
|
||||
&i2s1m0_sdi0
|
||||
&i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_pins>;
|
||||
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth {
|
||||
bt_reg_on_h: bt-reg-on-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host_h: bt-wake-host-h {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
host_wake_bt_h: host-wake-bt-h {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led: work-led {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie20_pins: pcie20-pins {
|
||||
rockchip,pins =
|
||||
<1 RK_PB0 4 &pcfg_pull_none>,
|
||||
<0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<1 RK_PB1 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie20_pwren: pcie20-pwren {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_pwren_h: usb-host-pwren-h {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb_otg_pwren_h: usb-otg-pwren-h {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on_h: wifi-reg-on-h {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_wake_host_h: wifi-wake-host-h {
|
||||
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <104000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user