colin/u-boot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

doc: starfive: use consistent formatting

Browse Source 
Always use ---- for the H2 level.

Reviewed-by: E Shattow <e@freeshell.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This commit is contained in:
Heinrich Schuchardt
2025-04-24 14:13:13 +02:00
parent 612e832a9c
commit 7441206279
3 changed files with 16 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
doc/board/starfive/milk-v_mars.rst
View File

@@ -8,7 +8,7 @@ board. In U-Boot SPL the actual board is detected and the device-tree patched
accordingly.
Building
~~~~~~~~
--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -40,7 +40,7 @@ This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
~~~~~~~~~~~~~~~~~~~~~
---------------------
Depending on the board version U-Boot set variable $fdtfile to either
starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
@@ -58,14 +58,14 @@ or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
provide a default value.
Boot source selection
~~~~~~~~~~~~~~~~~~~~~
---------------------
The board provides the DIP switches MSEL[1:0] to select the boot device out of
SPI flash, eMMC, SD-card, UART. To select booting from SD-card set the DIP
switches MSEL[1:0] to 10.
Preparing the SD-Card
~~~~~~~~~~~~~~~~~~~~~
---------------------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -106,6 +106,6 @@ Copy U-Boot to the SD card
sudo umount /mnt
Booting
~~~~~~~
-------
Once you plugin the sdcard and power up, you should see the U-Boot prompt.

12
doc/board/starfive/pine64_star64.rst
View File

@@ -8,7 +8,7 @@ In U-Boot SPL the actual board is detected and the device-tree patched
accordingly.
Building
~~~~~~~~
--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -40,7 +40,7 @@ This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
~~~~~~~~~~~~~~~~~~~~~
---------------------
U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb.
@@ -56,7 +56,7 @@ or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
provide a default value.
Boot source selection
~~~~~~~~~~~~~~~~~~~~~
---------------------
Boot mode is selected by an MSEL-DIP marked S1804 and GPIO_0 position adjacent
to the 40pin GPIO header. ON/ONKE and number markings of the MSEL-DIP are
@@ -69,7 +69,7 @@ accurate selection.
+ UART: 11
Preparing the SD-Card
~~~~~~~~~~~~~~~~~~~~~
---------------------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -110,12 +110,12 @@ Copy U-Boot to the SD card
sudo umount /mnt
Booting
~~~~~~~
-------
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
Serial Number and MAC address issues
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
------------------------------------
U-Boot requires valid EEPROM data to determine which board-specific fix-up to
apply at runtime. This affects the size of memory initialized, network mac

10
doc/board/starfive/visionfive2.rst
View File

@@ -36,7 +36,7 @@ Currently, the u-boot.itb is used as a dynamic of the OpenSBI FW_DYNAMIC
firmware with the latest.
Building
~~~~~~~~
--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -72,7 +72,7 @@ This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
~~~~~~~~~~~~~~~~~~~~~
---------------------
Depending on the board version U-Boot set variable $fdtfile to either
starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
@@ -90,7 +90,7 @@ or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to provide
a default value.
Flashing
~~~~~~~~
--------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -133,7 +133,7 @@ Program the SD card
sudo umount /mnt
Booting
~~~~~~~
-------
The board provides the DIP switches MSEL[1:0] to select the boot device.
To select booting from SD-card set the DIP switches MSEL[1:0] to 10.
@@ -141,7 +141,7 @@ To select booting from SD-card set the DIP switches MSEL[1:0] to 10.
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
Sample boot log from StarFive VisionFive2 board
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------
.. code-block:: none