The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This fix a possible NULL pointer dereference.
There is also a risk of memory leaking within the same portion of code.
The leak will happen if loaded image is bad or damaged. In this case
u-boot-spl will try booting from the other available media. Unfortunately
resources allocated for previous boot media will NOT be freed.
We can't fix that issue as the memory allocation mechanism used here
is unknown. It can be different kinds of malloc() or something else.
To somewhat reduce memory consumption, one can try to reuse previously
allocated memory as it's done in board_spl_fit_buffer_addr() from
test/image/spl_load.c.
The corresponding comment was put to the code as well.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
load_simple_fit() returns -EPERM for the images with broken signatures.
Unfortunately this may conflict with image loaging selection on the base
of boot phase. See commit 873112db9c
("spl: Support selecting images based on phase in simple FIT").
Thus loading of
configurations {
uboot {
description = "u-boot";
firmware = "atf";
loadables = "atf", "tee", "uboot";
};
};
with damaged "tee" image may finish without errors. This may results in
board bricking.
This patch fixes commit 873112db9c
("spl: Support selecting images based on phase in simple FIT")
by replacing EPERM with EBADSLT places where it should be done.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The current code have two issues:
1) ineffective NULL pointer check
str = strchr(str, '\0') + 1
if (!str || ...
The str here will never be NULL (because we add 1 to result of strchr())
2) strchr() may go out of the buffer for the special forms of name variable.
It's better use memchr() function here.
According to the code the property is a sequence of C-string like
shown below:
'h', 'e', 'l', 'l', 'o', '\0', 'w', 'o', 'r', 'l', 'd', '\0', '!', '\0'
index is the string number we are interested, so
index = 0 => "hello",
index = 1 => "world",
index = 2 => "!"
The issue will arrise if last string for some reason have no terminating
'\0' character. This can happen for damaged or specially crafted dtb.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Tom Rini <trini@konsulko.com>
According to include/sysreset.h the reset_cpu() function does not take any args
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Tom Rini <trini@konsulko.com>
The CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xeb300000 does not make it into
board .config on either R-Car V4H White Hawk or Sparrow Hawk, remove
this configuration option. The early SPL stack is however pointing
into the RT-VRAM and may corrupt payload loaded into the RT-VRAM by
the BootROM. Set the early SPL stack at fixed location at the end of
System RAM instead, where it cannot interfere with the payload loaded
into RT-VRAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Patrick Delaunay <patrick.delaunay@foss.st.com> says:
Fix and add documentation/tests for selection by string for known
partition type GUID introduced by bcb41dcaef ("uuid: add
selection by string for known partition type GUID"):
- split list_guid for short name (used also for partiton
description with type parameter) and full name to display
information
- as the function are uuid_str_to_bin() / uuid_guid_get_str()
are no more under CONFIG_PARTITION_TYPE_GUID, since commit
31ce367cd1 ("lib/uuid.c: change prototype of uuid_guid_get_str()")
and commit c1528f324c ("lib: compile uuid_guid_get_str if
CONFIG_LIB_UUID=y") move the content of array under EFI_PARTITION
and linker will remove it is not used it (in SPL)
- Add and fix documentation for gpt command
- Add test test_gpt_write_part_type to test "type=" parameters
This first patch solves an issue for the "system" shortcut for ESP,
removed by commit d54V3 version solve issue for "ESP" support when
CONFIG_CMD_EFIDEBUG and CONFIG_EFI is not activated
for example for test with qemu-arm-sbsa defconfige1004b8b1 ("lib/uuid.c: use unique name
for PARTITION_SYSTEM_GUID") but used in 2 location (at least):
1- board/samsung/e850-96/e850-96.env:10:
partitions=name=esp,start=512K,size=128M,bootable,type=system;
partitions+=name=rootfs,size=-,bootable,type=linux
2- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c:1151
case PART_ESP:
/* EFI System Partition */
459219 type_str = "system"
....
offset += snprintf(buf + offset,
buflen - offset,
",type=%s", type_str);
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/26699
Link: https://lore.kernel.org/r/20250616112749.17311-1-patrick.delaunay@foss.st.com
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add support of optional shortname for parameter 'type' of gpt
command (limited by UUID_STR_LEN) and a separate 'description'
for UID format "%pUs" used in 'part list' output.
When 'description' is absent in list_guid[], the optional
shortname is used as fallback.
Many partition types for EFI have no shortcut yet, but only
description as they are only used to display information.
This patch also restores the "system" as short name for EFI
System Partition (ESP).
Fixes: d54e1004b8 ("lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID")
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3d ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed8 ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250611171031.840277-1-kory.maincent@bootlin.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <ipman@amazon.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20250611050127.38011-1-ipman@amazon.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Writing to eMMC on RK3528 is affected with the same or a similar issue
as on RK3588, where eMMC must init to HS200 at least once to fully work.
Trying to write u-boot-rockchip.bin to eMMC fails with:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... mmc write failed
0 blocks written: ERROR
For U-Boot to enable HS200 mode the mmc-hs200-1_8v prop must be defined
in the device tree. Linux does not seem to be affected and is able to
detect and use HS200 without this prop.
Enable use of HS200 and fix eMMC write on RK3528 by adding the missing
mmc-hs200-1_8v prop for affected boards:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... 20480 blocks written: OK
Fixes: b112a44531 ("board: rockchip: Add minimal generic RK3528 board")
Fixes: ccbddf6453 ("board: rockchip: Add Radxa E20C")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Raspberry Pi 5 can now have up to 16 GiB of RAM where the memory spans 8
DRAM banks in total. Increase the config value to 8 to initialize the
whole RAM. Without this change, kernel only sees 8 GiB of RAM on the 16
GiB CM5 as reported in [1].
[1] https://github.com/home-assistant/operating-system/issues/3989
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
This patch is to solve the sandbox building error:
$ make O=build-sandbox -s sandbox_defconfig
$ make O=build-sandbox -s -j2
/usr/bin/ld: /tmp/u-boot.27rzOu.ltrans58.ltrans.o: undefined reference to symbol 'pthread_kill@@GLIBC_2.2.5'
/usr/bin/ld: /lib/x86_64-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
[...]
Fixes: b989f9ed9f ("test: lib: add initjmp() test")
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
If an Unexpected exception is thrown in a test, an undefined variable
error is reported. Fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 85d7dae377 ("test: Detect dead connections")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
If a BootFail exception is thrown in a test, it is not handled
correctly. Use the correct fixture variable 'ubman_fix' to resolve this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: d9ed4b75ad ("test/py: Drop u_boot_ prefix on test files")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
When the toradex-smarc-imx8mp_defconfig file was first added, SPL_STACK
was set to 0x960000, but SPL_HAVE_INIT_STACK wasn't enabled.
This led to SPL_STACK being correctly dropped in commit 25fefa05d7
("configs: Resync with savedefconfig"), since SPL_HAVE_INIT_STACK was
missing, which ended up making the board not boot.
Fix this by adding SPL_STACK back and making sure SPL_HAVE_INIT_STACK is
enabled.
Fixes: dde53eae88 ("board: toradex: add Toradex SMARC iMX8MP")
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
After enabling some options to support EEPROM read in SPL
(CONFIG_SPL_I2C_EEPROM), the following error appears:
alloc space exhausted
Increasing SYS_MALLOC_F_LEN from 8kB to 64kB fixes the problem.
But instead of manually increasing the value, adopt method used in
commit ce3f23404c ("board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge
CONFIG_SPL_SYS_MALLOC_F_LEN"):
Dropping CONFIG_SPL_SYS_MALLOC_F_LEN option allows it to be set to the
default value of CONFIG_SYS_MALLOC_F_LEN, which is set by default to 64kB
(0x10000) on i.MX8M platforms.
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
i.MX91 device tree still not landed in linux kernel, so drop OF_UPSTREAM
and move the device tree files to arch/arm/dts
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
When doing the investigation for commit 53bb8fdea1 ("mmc: Kconfig:
Correct dependencies SDHCI ADMA options") I missed the implications of
MMC_SDHCI_ADMA_HELPERS. The problem is that FSL_ESDHC via the
FSL_ESDHC_SUPPORT_ADMA2 option will also enable these helper functions.
This in turn means the correct dependency here is
MMC_SDHCI_ADMA_HELPERS and not *MMC_SDHCI_ADMA.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
One more board to support, this time Retronix Sparrow Hawk based on
Renesas R-Car V4H SoC . This is board support, so master branch should
be fine. The DT in dts/upstream/ is a backport from Linux, and will
disappear on next DT sync.
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Introduce weak renesas_dram_init_banksize() function which is meant
to be used to adjust DRAM bank sizes after the common Renesas board
DRAM bank handling code finished. This is mainly meant for boards
which ship with multiple DRAM size options, which can be detected
at runtime. This allows such boards to ship with single U-Boot
binary on all boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This reverts commit 159b6f0e11.
Since commit 159b6f0e11 ("caam: Fix CAAM error on startup") the following
regression was reported by Tim Harvey:
"I've found that this patch causes a regression on an imx8mm board
(imx8mm_venice_defconfig) where the first call to caam_rng_read fails
here in jr_dequeue but if you call it again it works. With some
debugging added:
SEC0: RNG instantiated
...
Hit any key to stop autoboot: 0
u-boot=> rng list
RNG #0 - caam-rng
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
Error in SEC deq: -1
caam_rng_read_one run_descriptor_jr failed: -1
caam_rng_read caam-rng caam_rng_read_one failed: -5
Reading RNG failed
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
00000000: ad 2e ad c0 2a 12 27 c4 65 82 66 19 be ef f6 07 ....*.'.e.f.....
If I revert your patch caam_rng_read works initially and on subsequent
calls."
" I ran into this when I was testing
lwIP HTTPS as it causes anything that uses dm_rng to fail the first
time (such as HTTPS)."
Revert it for now to avoid the regression.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Add 'imply CONFIG_POSITION_INDEPENTDENT' for QEMU arm arch. This allows
qemu arm boards to load u-boot.bin at any address. It is skipped by
default when u-boot is loaded by either --bios or --kernel.
To load u-boot.bin at a different address, one can use u-boot
chain-loading or qemu loader device[1].
[1] https://www.qemu.org/docs/master/system/generic-loader.html
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
when CONFIG_BLOBLIST is enabled, the section is switched to .data but is
not switched back to .text. It makes all the code below placed in .data
section, also breaks CONFIG_POSITION_INDEPENDENT.
Fix it by adding `.section .text` to switch the section back to .text.
Fixes: 5103e69344 ("arm: armv7: save boot arguments")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Fix a typo error in gcc.rst, changing "out-out-tree" to
"out-of-tree" in the Out-of-tree section.
Signed-off-by: BehradElmi <behradelmi1@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The details of the sysfw.itb from the R5 build that
also needs to be copied as part of the target images
is missing, but is included in the image formats a
little further down, so add it to the instructions.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
%s/data that change/data that changes/
%s/cannot be used has/cannot be used for/
%s/Otherwise/Otherwise,/
%s/allows better measurement/allows for better measurement/
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The val (the bits to set) is the second member of the reg_data structure
and mask the third one. We obviously want to clear bits 6 and 7 in order
to only set bit 7 in there instead of only clearing bit 7 in order to
write bits 6 and 7 (which makes no sense).
Fortunately, according to the datasheet, bit 6 value doesn't matter when
bit 7 is set so this is essentially just a cosmetic change, no intended
change in behavior.
Fixes: f172575d92 ("power: rk8xx: add support for RK806")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi RK3399 boards support UHS-I (up to SDR104) SD cards, however
using any of these 1.8v modes results in a boot failure in SPL upon soft
reboot.
The issue is that the "vcc_sdio" regulator is left at 1.8v on reboot
and the corresponding GPIO defaults to 3.3v. This prevents the SD card
from being reinitialized and read successfully.
This change enables the RK8XX regulators and Rockchip IO-domain drivers
in SPL, which initializes "vcc_sdio" regulator to 3.0v and configures
the GPIO for the correct level on boot.
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This change removes the "regulator-always-on" property from the
"vcc3v0_sd" (vmmc-supply) and "vcc_sdio" (vqmmc-supply) regulators,
which otherwise prevents the MMC driver from being able to power cycle
the SD card as part of the initialization procedure.
It also removes the "regulator-boot-on" from the "vcc_sdio" regulator,
which could theoretically damage a SD card that is already initialized
in a low voltage mode.
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Allows use of the regulator functions of the RK8XX PMIC in SPL, which is
necessary to support the functionality of the Rockchip IO-domain driver
on relevant platforms.
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Allows use of the Rockchip IO-domain driver in SPL to configure
the GPIO to match the voltage supplied by specific regulators
(e.g. "vcc_sdio").
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Log the value of the regulators during initialization of the IO-domain
driver to aid in debugging GPIO voltage configuration problems.
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Our upcoming Mass Flasher solution will be storing boot artifacts on an
exFAT partition so enable its support.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
