This information is useful for people looking at how U-Boot has changed
over the years and the design decisions which led to it. Move it into
doc/ in an 'historical' section.
Signed-off-by: Simon Glass <sjg@chromium.org>
If the environment is not enabled we don't need these fields in
global_data. Make them conditional.
Make these fields conditional. Move env_buf up one so it can share
an #ifdef.
Signed-off-by: Simon Glass <sjg@chromium.org>
The early malloc region is normally quite small and is certainly less
than 4GB, so use a 32-bit value for the limit and pointer. Update the
comments for clarity while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some of the logging fields are larger than they need to be. Shrink them
and adjust the ordering to improve alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is the length of the U-Boot binary, which is typically 200-800KB
and certainly not larger than 4GB. Use a 32-bit value to save space in
global_data and move it up to be with fields of the same alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bus clock and memory clock are unlikely to go above 4GHz for now, so
reduce the field size to 32 bits.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move all the fields which are always present to the top of the struct,
so we can potentially save some space by taking note of alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function to locate this information, rather than doing it
automatically on startup, to save space in global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
This value is only really used before relocation. There is not much use
to showing its value in bdinfo, so drop it. Move it to the new boardf
struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
Quite a few of the members of struct global_data are only used before
reloction, or have little meaning afterwards, yet they hang around in
struct global_data for the lifetime of U-Boot. This uses up precious
pre-relocation SRAM on many boards.
To help with this, start a new struct which exists only before
relocation. Move new_fdt into this new struct. Drop the display of it
in the 'bdinfo' command as it is probably not very useful.
Note that the field does not exist in SPL builds.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use shorter types for some of these fields to save space. Reorder to put
fields with like alignment together.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need a full word for this boolean value. Convert it into a flag
to save space in global_data.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
This value mirrors information recorded by driver model video drivers,
so can be removed to save space. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is handled by driver model so this driver should not be setting the
framebuffer address. Drop the assignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new function which returns the framebuffer address of the first
video device. This will allow the global_data field top be dropped.
Signed-off-by: Simon Glass <sjg@chromium.org>
Only m68k and powerpc use this field, so move it to the arch-specific
info, to reduce the size for other archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
While we have a symbol for controlling if we will be testing BOOTSTD or
not, and it depends on SANDBOX, we do not control the building of
test/boot/ content correctly. Guard the current bootstd tests with
a check for UT_BOOTSTD and leave the measurement test available.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
As the overlays are sandbox specific, mark the whole test as depending
on sandbox.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Update the comment to match the function. Fix the indentation while we
are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Rather than declaring completely separate functions, put the code for
each case into the same function. This makes it easier to read.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
At present spl_mmc_load() is the only caller of this function, passing
it a boot_device, an index into the available MMC devices. Pass the
device number instead, since it is known by the caller and simplifies
the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Use 'ret' as the return code, since it may not be an error and this is
the common name in U-Boot. Make sure to return the error code when
given, rather than transforming it into -1 (-EPERM).
Signed-off-by: Simon Glass <sjg@chromium.org>
This check is not needed now, since printf() resolved to nothing if not
available. Drop the #ifdefs
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Unless function names are requested, the logging system should not
compile these into the code. Adjust the macros to handle this.
This means that turning on function names at runtime won't work unless
CONFIG_LOGF_FUNC is enabled. We could perhaps split this into a
separate option if that is a problem.
Enable CONFIG_LOGF_FUNC logging for sandbox since the tests expect the
function names to be included. Fix up the pinmux test which checks a
logging statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Use the log subsystem instead of dev, to avoid including function names
in the code.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Update 'enhanced size' to use hex since this is the U-Boot default and
more natural for the large numbers involved.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The code makes quite a few uses of __func__ which puts the function
name into the resulting SPL image. Use the log subsystem instead, to
reduce size.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Use lower-case hex for the status output in sdhci_transfer_data(), to
match sdhci_send_command()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Define spl_set_header_raw_uboot() always so we can drop the last #ifdef
in this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
