The current cmd_ut_sub[] array was fine when there were only a few test
suites. But is quite unwieldy now:
- it requires a separate do_ut_xxx for each suite, even though the code
for most is almost identical
- running more than one suite requires running multiple commands, and
there is no record of which suites passed or failed
- 'ut all' runs all suites but reports their results individually
- we need lots of #ifdefs in the array, mirroring those in the makefile
but maintained in a separate place
In fact the tests are all in the same linker list. The suites are
grouped, so it is possible to access the information without a command.
Introduce a 'suite' array, which holds the cmd_ut_...() function to
call, but can also support running a suite without that function. This
means that the array of struct cmd_tbl is transformed into an array of
'struct suite'.
This will allow removal of many of the functions, particularly those
without test-specific init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
A limitation of most linker_list macros is that they cannot easily be
used in data structures. This is because they include code inside their
expressions.
Provide a way to support this, with new ll_start_decl() and
ll_end_decl() macros.
Signed-off-by: Simon Glass <sjg@chromium.org>
The ofnode_find_subnode() function currently processes things two
different ways, so the treatment of unit addresses differs depending on
whether OF_LIVE is enabled or not.
Add a new version which uses the ofnode API and add a test to check that
unit addresses can be matched correctly. Leave the old function in place
for the !OF_LIVE case, to avoid a code-size increase, e.g. on
firefly-rk3288
Signed-off-by: Simon Glass <sjg@chromium.org>
When a unit-address is provided, use it to match against the node
name.
Since this increases code size, put it into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add this information to the handoff structure so that it is available to
U-Boot proper. Update bochs and the video handoff.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function is really just getting the data. The size comes along for
the ride. In fact this function is only reliable way to obtain the data
for an image in a FIT, since the FIT may use external data.
Rename it to fit_image_get_data()
Signed-off-by: Simon Glass <sjg@chromium.org>
This function can only be used with FITs that use embedded data. Rename
it so this is clear.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Some header files included on the host are moving to use abuf, so adjust
the header-inclusion to bring in size_t correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
In many cases it is useful to get the address of a buffer, e.g. when
booting from it. Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
The highlights are:
* Fixed boot regression due to broken memory parsing
* Enable HW RNG and KASLR on all platforms
* Add support for Snapdragon X1 Elite hardware (clk/pinctrl)
* Add support for QCS9100 ride automotive development platform (clk/ufs)
* Add support for PCIe on SM8550, SM8650 and X1E
* Implement software debounce for PMIC buttons
Additionally, some minor improvements to "ufetch" have been pulled in:
* Show CPU architecture (arm/mips/etc)
* Make CONFIG_BLK optional
* Fix 32-bit support
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on introducing a relocating
SPL-loader so that VBE can run in the limited amount of SRAM available
on many devices.
Another minor new feature is support in VBE for specifying the image
phase when loading from a FIT. This allows a single FIT to include
images for several boot phases, thus simplifying image-creation.
One lingering niggle in this series is that it has a different code path
for sandbox, since it does not support the relocating jump. It should be
possible to resolve this with additional work, but I have not attempted
this so far.
For v2, I have split the first patch into 5 pieces, to make it easier to
see the code-size impact, plus added a few tweaks to reduce code size.
Again, only MMC is supported so far.
Looking ahead, series G will have some more plumbing and H some rk3399
pieces. That should be enough to complete these feature.
Here is a run in my lab, with the VBE ABrec bootmeth. You can see that
VPL runs before memory is set up. SPL sets up memory and can be upgraded
in the field reliably.
$ ub-int vbe
Building U-Boot in sourcedir for rk3399-generic
Bootstrapping U-Boot from dir /tmp/b/rk3399-generic
Writing U-Boot using method rockchip
U-Boot TPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Using 'config-3' configuration
Trying 'image-vpl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
U-Boot VPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Starting with empty state
VBE: Firmware pick A at 800000
Using 'config-3' configuration
Trying 'spl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
Channel 0: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
U-Boot SPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
VBE: Firmware pick A at 900000
load_simple_fit: Skip load 'atf-5': image size is 0!
Relocating bloblist ff8eff00 to 100000: done
ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly-RK3399 Board
DRAM: 4 GiB (effective 3.9 GiB)
Core: 314 devices, 33 uclasses, devicetree: separate
MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Model: Firefly-RK3399 Board
Net: PMIC: RK808
eth0: ethernet@fe300000
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Link: https://lore.kernel.org/r/20250116012723.2820301-1-sjg@chromium.org
When building without DHCP/PXE configurations (NET disabled),
compilation errors may occur due to mismatched bootargs.
Ensure bootargs related to DHCP/PXE are not enabled if the
corresponding commands are disabled.
include/config_distro_bootcmd.h:443:9: error: expected ‘}’ before
‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’
443 | BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chanho Park <parkch98@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
We have a duplicate declaration of spi_mem_default_supports_op() which
was added twice, first with commit af6266c1c2 ("mem: spi-mem: add
declaration for spi_mem_default_supports_op") for v2021.04, and again
with commit 2299076e34 ("spi: spi-mem: export
spi_mem_default_supports_op()") for v2021.07.
The first commit is reverted here, because the second better matches the
definition and has a better place in the declaration order.
Note: Linux declares this in a different section of spi-mem.h which is
disabled in U-Boot through `#ifndef __UBOOT__`.
This reverts commit af6266c1c2.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
This is fairly easy to use. The SPL loader sets up some fields in the
spl_image_info struct and calls spl_reloc_prepare(). When SPL is ready
to do the jump it must call spl_reloc_jump() instead of jump_to_image().
Add this logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
When one xPL phase wants to jump to the next, the next phase must be
loaded into its required address. This means that the TEXT_BASE for the
two phases must be different and there cannot be any memory overlap
between the code used by the two phases. It also can mean that phases
need to be moved around to accommodate any size growth.
Having two xPL phases in SRAM at the same time can be tricky if SRAM
is limited, which it often is. It would be better if the second phase
could be loaded somewhere else, then decompressed into place over the
top of the first phase.
Introduce a relocating jump for xPL to support this. This selects a
suitable place to load the (typically compressed) next phase, copies
some decompression code out of the first phase, then jumps to this code
to decompress and start the next phase.
This feature makes it much easier to support Verified Boot for Embedded
(VBE) on RK3399 boards, which have 192KB of SRAM.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function will be used by the relocating jumper too, so add a
typedef to the header file to avoid mismatches.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for the PCIe busses on Qualcomm platforms,
by using the pcie_dw_common infrastructure.
The driver is based on the Linux driver but only supporting
the "1_9_0" and compatible platforms like:
- sa8540p
- sc7280
- sc8180x
- sc8280xp
- sdm845
- sdx55
- sm8150
- sm8250
- sm8350
- sm8450
- sm8550
- sm8650
- x1e80100
But it has only been tested on:
- sc7280
- sm8550
- sm8650
- x1e80100
It supports setting the IOMMU SID table for supported platforms.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241125-topic-pcie-controller-v1-2-45c20070dd53@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Replace delay_ns by delay_us which is the field name used into
struct cyclic_info.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Move differences in DT files between upstream Linux DT and U-Boot DT to
mt7629-rfb-u-boot.dtsi.
Remove old copies of mt7629-related clock bindings, .dts, and .dtsi files.
Update defconfig to switch the whole mt7629 SoC to use OF_UPSTREAM.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
